add hg and python

cinap_lenrek committed 15 years ago

Commit 4bb9e221 parent 987265c3706 files · +1228772 −-233Browse files

Showing the changes to sys/src/cmd/python/Modules/Setup (1 of 3706 files). Show all

Unified · Split

@@ -0,0 +1,488 @@
	1	+# -- makefile --
	2	+# The file Setup is used by the makesetup script to construct the files
	3	+# Makefile and config.c, from Makefile.pre and config.c.in,
	4	+# respectively. The file Setup itself is initially copied from
	5	+# Setup.dist; once it exists it will not be overwritten, so you can edit
	6	+# Setup to your heart's content. Note that Makefile.pre is created
	7	+# from Makefile.pre.in by the toplevel configure script.
	8	+
	9	+# (VPATH notes: Setup and Makefile.pre are in the build directory, as
	10	+# are Makefile and config.c; the .in and .dist files are in the source
	11	+# directory.)
	12	+
	13	+# Each line in this file describes one or more optional modules.
	14	+# Modules enabled here will not be compiled by the setup.py script,
	15	+# so the file can be used to override setup.py's behavior.
	16	+
	17	+# Lines have the following structure:
	18	+#
	19	+# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
	20	+#
	21	+# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
	22	+# <cpparg> is anything starting with -I, -D, -U or -C
	23	+# <library> is anything ending in .a or beginning with -l or -L
	24	+# <module> is anything else but should be a valid Python
	25	+# identifier (letters, digits, underscores, beginning with non-digit)
	26	+#
	27	+# (As the makesetup script changes, it may recognize some other
	28	+# arguments as well, e.g. .so and .sl as libraries. See the big
	29	+# case statement in the makesetup script.)
	30	+#
	31	+# Lines can also have the form
	32	+#
	33	+# <name> = <value>
	34	+#
	35	+# which defines a Make variable definition inserted into Makefile.in
	36	+#
	37	+# Finally, if a line contains just the word "shared" (without the
	38	+# quotes but with the stars), then the following modules will not be
	39	+# built statically. The build process works like this:
	40	+#
	41	+# 1. Build all modules that are declared as static in Modules/Setup,
	42	+# combine them into libpythonxy.a, combine that into python.
	43	+# 2. Build all modules that are listed as shared in Modules/Setup.
	44	+# 3. Invoke setup.py. That builds all modules that
	45	+# a) are not builtin, and
	46	+# b) are not listed in Modules/Setup, and
	47	+# c) can be build on the target
	48	+#
	49	+# Therefore, modules declared to be shared will not be
	50	+# included in the config.c file, nor in the list of objects to be
	51	+# added to the library archive, and their linker options won't be
	52	+# added to the linker options. Rules to create their .o files and
	53	+# their shared libraries will still be added to the Makefile, and
	54	+# their names will be collected in the Make variable SHAREDMODS. This
	55	+# is used to build modules as shared libraries. (They can be
	56	+# installed using "make sharedinstall", which is implied by the
	57	+# toplevel "make install" target.) (For compatibility,
	58	+# noconfig has the same effect as shared.)
	59	+#
	60	+# In addition, static explicitly declares the following modules to
	61	+# be static. Lines containing "static" and "shared" may thus
	62	+# alternate throughout this file.
	63	+
	64	+# NOTE: As a standard policy, as many modules as can be supported by a
	65	+# platform should be present. The distribution comes with all modules
	66	+# enabled that are supported by most platforms and don't require you
	67	+# to ftp sources from elsewhere.
	68	+
	69	+
	70	+# Some special rules to define PYTHONPATH.
	71	+# Edit the definitions below to indicate which options you are using.
	72	+# Don't add any whitespace or comments!
	73	+
	74	+# Directories where library files get installed.
	75	+# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
	76	+DESTLIB=$(LIBDEST)
	77	+MACHDESTLIB=$(BINLIBDEST)
	78	+
	79	+# NOTE: all the paths are now relative to the prefix that is computed
	80	+# at run time!
	81	+
	82	+# Standard path -- don't edit.
	83	+# No leading colon since this is the first entry.
	84	+# Empty since this is now just the runtime prefix.
	85	+DESTPATH=
	86	+
	87	+# Site specific path components -- should begin with : if non-empty
	88	+SITEPATH=
	89	+
	90	+# Standard path components for test modules
	91	+TESTPATH=
	92	+
	93	+# Path components for machine- or system-dependent modules and shared libraries
	94	+MACHDEPPATH=:plat-$(MACHDEP)
	95	+EXTRAMACHDEPPATH=
	96	+
	97	+# Path component for the Tkinter-related modules
	98	+# The TKPATH variable is always enabled, to save you the effort.
	99	+TKPATH=:lib-tk
	100	+
	101	+COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(EXTRAMACHDEPPATH)$(TKPATH)
	102	+PYTHONPATH=$(COREPYTHONPATH)
	103	+
	104	+
	105	+# The modules listed here can't be built as shared libraries for
	106	+# various reasons; therefore they are listed here instead of in the
	107	+# normal order.
	108	+
	109	+# This only contains the minimal set of modules required to run the
	110	+# setup.py script in the root of the Python source tree.
	111	+
	112	+posix posixmodule.c # posix (UNIX) system calls
	113	+errno errnomodule.c # posix (UNIX) errno values
	114	+pwd pwdmodule.c # this is needed to find out the user's home dir
	115	+ # if $HOME is not set
	116	+_sre _sre.c # Fredrik Lundh's new regular expressions
	117	+_codecs _codecsmodule.c # access to the builtin codecs and codec registry
	118	+_ssl _ssl.c
	119	+
	120	+# The zipimport module is always imported at startup. Having it as a
	121	+# builtin module avoids some bootstrapping problems and reduces overhead.
	122	+zipimport zipimport.c
	123	+
	124	+# The rest of the modules listed in this file are all commented out by
	125	+# default. Usually they can be detected and built as dynamically
	126	+# loaded modules by the new setup.py script added in Python 2.1. If
	127	+# you're on a platform that doesn't support dynamic loading, want to
	128	+# compile modules statically into the Python binary, or need to
	129	+# specify some odd set of compiler switches, you can uncomment the
	130	+# appropriate lines below.
	131	+
	132	+# ======================================================================
	133	+
	134	+# The Python symtable module depends on .h files that setup.py doesn't track
	135	+_symtable symtablemodule.c
	136	+
	137	+# The SGI specific GL module:
	138	+
	139	+GLHACK=-Dclear=__GLclear
	140	+#gl glmodule.c cgensupport.c -I$(srcdir) $(GLHACK) -lgl -lX11
	141	+
	142	+# Pure module. Cannot be linked dynamically.
	143	+# -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE
	144	+#WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE
	145	+#PURE_INCLS=-I/usr/local/include
	146	+#PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs
	147	+#pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS)
	148	+
	149	+# Uncommenting the following line tells makesetup that all following
	150	+# modules are to be built as shared libraries (see above for more
	151	+# detail; also note that static reverses this effect):
	152	+
	153	+#shared
	154	+
	155	+# GNU readline. Unlike previous Python incarnations, GNU readline is
	156	+# now incorporated in an optional module, configured in the Setup file
	157	+# instead of by a configure script switch. You may have to insert a
	158	+# -L option pointing to the directory where libreadline.* lives,
	159	+# and you may have to change -ltermcap to -ltermlib or perhaps remove
	160	+# it, depending on your system -- see the GNU readline instructions.
	161	+# It's okay for this to be a shared library, too.
	162	+
	163	+#readline readline.c -lreadline -ltermcap
	164	+
	165	+
	166	+# Modules that should always be present (non UNIX dependent):
	167	+
	168	+#array arraymodule.c # array objects
	169	+#cmath cmathmodule.c # -lm # complex math library functions
	170	+#math mathmodule.c # -lm # math library functions, e.g. sin()
	171	+#_struct _struct.c # binary structure packing/unpacking
	172	+#time timemodule.c # -lm # time operations and variables
	173	+#operator operator.c # operator.add() and similar goodies
	174	+#_weakref _weakref.c # basic weak reference support
	175	+#_testcapi _testcapimodule.c # Python C API test module
	176	+#_random _randommodule.c # Random number generator
	177	+#collections collectionsmodule.c # Container types
	178	+#itertools itertoolsmodule.c # Functions creating iterators for efficient looping
	179	+#strop stropmodule.c # String manipulations
	180	+
	181	+#unicodedata unicodedata.c # static Unicode character database
	182	+
	183	+# access to ISO C locale support
	184	+#_locale _localemodule.c # -lintl
	185	+
	186	+
	187	+# Modules with some UNIX dependencies -- on by default:
	188	+# (If you have a really backward UNIX, select and socket may not be
	189	+# supported...)
	190	+
	191	+#fcntl fcntlmodule.c # fcntl(2) and ioctl(2)
	192	+#spwd spwdmodule.c # spwd(3)
	193	+#grp grpmodule.c # grp(3)
	194	+#select selectmodule.c # select(2); not on ancient System V
	195	+
	196	+# Memory-mapped files (also works on Win32).
	197	+#mmap mmapmodule.c
	198	+
	199	+# CSV file helper
	200	+#_csv _csv.c
	201	+
	202	+# Socket module helper for socket(2)
	203	+#_socket socketmodule.c
	204	+
	205	+# Socket module helper for SSL support; you must comment out the other
	206	+# socket line above, and possibly edit the SSL variable:
	207	+#SSL=/usr/local/ssl
	208	+#_ssl _ssl.c \
	209	+# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
	210	+# -L$(SSL)/lib -lssl -lcrypto
	211	+
	212	+# The crypt module is now disabled by default because it breaks builds
	213	+# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
	214	+#
	215	+# First, look at Setup.config; configure may have set this for you.
	216	+
	217	+#crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems
	218	+
	219	+
	220	+# Some more UNIX dependent modules -- off by default, since these
	221	+# are not supported by all UNIX systems:
	222	+
	223	+#nis nismodule.c -lnsl # Sun yellow pages -- not everywhere
	224	+#termios termios.c # Steen Lumholt's termios module
	225	+#resource resource.c # Jeremy Hylton's rlimit interface
	226	+
	227	+
	228	+# Multimedia modules -- off by default.
	229	+# These don't work for 64-bit platforms!!!
	230	+# #993173 says audioop works on 64-bit platforms, though.
	231	+# These represent audio samples or images as strings:
	232	+
	233	+#audioop audioop.c # Operations on audio samples
	234	+#imageop imageop.c # Operations on images
	235	+#rgbimg rgbimgmodule.c # Read SGI RGB image files (but coded portably)
	236	+
	237	+
	238	+# Note that the _md5 and _sha modules are normally only built if the
	239	+# system does not have the OpenSSL libs containing an optimized version.
	240	+
	241	+# The _md5 module implements the RSA Data Security, Inc. MD5
	242	+# Message-Digest Algorithm, described in RFC 1321. The necessary files
	243	+# md5.c and md5.h are included here.
	244	+
	245	+#_md5 md5module.c md5.c
	246	+
	247	+
	248	+# The _sha module implements the SHA checksum algorithm.
	249	+# (NIST's Secure Hash Algorithm.)
	250	+#_sha shamodule.c
	251	+
	252	+
	253	+# SGI IRIX specific modules -- off by default.
	254	+
	255	+# These module work on any SGI machine:
	256	+
	257	+# * gl must be enabled higher up in this file *
	258	+#fm fmmodule.c $(GLHACK) -lfm -lgl # Font Manager
	259	+#sgi sgimodule.c # sgi.nap() and a few more
	260	+
	261	+# This module requires the header file
	262	+# /usr/people/4Dgifts/iristools/include/izoom.h:
	263	+#imgfile imgfile.c -limage -lgutil -lgl -lm # Image Processing Utilities
	264	+
	265	+
	266	+# These modules require the Multimedia Development Option (I think):
	267	+
	268	+#al almodule.c -laudio # Audio Library
	269	+#cd cdmodule.c -lcdaudio -lds -lmediad # CD Audio Library
	270	+#cl clmodule.c -lcl -lawareaudio # Compression Library
	271	+#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11 # Starter Video
	272	+
	273	+
	274	+# The FORMS library, by Mark Overmars, implements user interface
	275	+# components such as dialogs and buttons using SGI's GL and FM
	276	+# libraries. You must ftp the FORMS library separately from
	277	+# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a.
	278	+# NOTE: if you want to be able to use FORMS and curses simultaneously
	279	+# (or both link them statically into the same binary), you must
	280	+# compile all of FORMS with the cc option "-Dclear=__GLclear".
	281	+
	282	+# The FORMS variable must point to the FORMS subdirectory of the forms
	283	+# toplevel directory:
	284	+
	285	+#FORMS=/ufs/guido/src/forms/FORMS
	286	+#fl flmodule.c -I$(FORMS) $(GLHACK) $(FORMS)/libforms.a -lfm -lgl
	287	+
	288	+
	289	+# SunOS specific modules -- off by default:
	290	+
	291	+#sunaudiodev sunaudiodev.c
	292	+
	293	+
	294	+# A Linux specific module -- off by default; this may also work on
	295	+# some *BSDs.
	296	+
	297	+#linuxaudiodev linuxaudiodev.c
	298	+
	299	+
	300	+# George Neville-Neil's timing module:
	301	+
	302	+#timing timingmodule.c
	303	+
	304	+
	305	+# The _tkinter module.
	306	+#
	307	+# The command for _tkinter is long and site specific. Please
	308	+# uncomment and/or edit those parts as indicated. If you don't have a
	309	+# specific extension (e.g. Tix or BLT), leave the corresponding line
	310	+# commented out. (Leave the trailing backslashes in! If you
	311	+# experience strange errors, you may want to join all uncommented
	312	+# lines and remove the backslashes -- the backslash interpretation is
	313	+# done by the shell's "read" command and it may not be implemented on
	314	+# every system.
	315	+
	316	+# *** Always uncomment this (leave the leading underscore in!):
	317	+# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
	318	+# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
	319	+# -L/usr/local/lib \
	320	+# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
	321	+# -I/usr/local/include \
	322	+# *** Uncomment and edit to reflect where your X11 header files are:
	323	+# -I/usr/X11R6/include \
	324	+# *** Or uncomment this for Solaris:
	325	+# -I/usr/openwin/include \
	326	+# *** Uncomment and edit for Tix extension only:
	327	+# -DWITH_TIX -ltix8.1.8.2 \
	328	+# *** Uncomment and edit for BLT extension only:
	329	+# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
	330	+# *** Uncomment and edit for PIL (TkImaging) extension only:
	331	+# (See http://www.pythonware.com/products/pil/ for more info)
	332	+# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \
	333	+# *** Uncomment and edit for TOGL extension only:
	334	+# -DWITH_TOGL togl.c \
	335	+# *** Uncomment and edit to reflect your Tcl/Tk versions:
	336	+# -ltk8.2 -ltcl8.2 \
	337	+# *** Uncomment and edit to reflect where your X11 libraries are:
	338	+# -L/usr/X11R6/lib \
	339	+# *** Or uncomment this for Solaris:
	340	+# -L/usr/openwin/lib \
	341	+# *** Uncomment these for TOGL extension only:
	342	+# -lGL -lGLU -lXext -lXmu \
	343	+# *** Uncomment for AIX:
	344	+# -lld \
	345	+# *** Always uncomment this; X11 libraries to link with:
	346	+# -lX11
	347	+
	348	+# Lance Ellinghaus's syslog module
	349	+#syslog syslogmodule.c # syslog daemon interface
	350	+
	351	+
	352	+# Curses support, requring the System V version of curses, often
	353	+# provided by the ncurses library. e.g. on Linux, link with -lncurses
	354	+# instead of -lcurses).
	355	+#
	356	+# First, look at Setup.config; configure may have set this for you.
	357	+
	358	+#_curses _cursesmodule.c -lcurses -ltermcap
	359	+# Wrapper for the panel library that's part of ncurses and SYSV curses.
	360	+#_curses_panel _curses_panel.c -lpanel -lncurses
	361	+
	362	+
	363	+# Generic (SunOS / SVR4) dynamic loading module.
	364	+# This is not needed for dynamic loading of Python modules --
	365	+# it is a highly experimental and dangerous device for calling
	366	+# arbitrary C functions in arbitrary shared libraries:
	367	+
	368	+#dl dlmodule.c
	369	+
	370	+
	371	+# Modules that provide persistent dictionary-like semantics. You will
	372	+# probably want to arrange for at least one of them to be available on
	373	+# your machine, though none are defined by default because of library
	374	+# dependencies. The Python module anydbm.py provides an
	375	+# implementation independent wrapper for these; dumbdbm.py provides
	376	+# similar functionality (but slower of course) implemented in Python.
	377	+
	378	+# The standard Unix dbm module has been moved to Setup.config so that
	379	+# it will be compiled as a shared library by default. Compiling it as
	380	+# a built-in module causes conflicts with the pybsddb3 module since it
	381	+# creates a static dependency on an out-of-date version of db.so.
	382	+#
	383	+# First, look at Setup.config; configure may have set this for you.
	384	+
	385	+#dbm dbmmodule.c # dbm(3) may require -lndbm or similar
	386	+
	387	+# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm:
	388	+#
	389	+# First, look at Setup.config; configure may have set this for you.
	390	+
	391	+#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
	392	+
	393	+
	394	+# Sleepycat Berkeley DB interface.
	395	+#
	396	+# This requires the Sleepycat DB code, see http://www.sleepycat.com/
	397	+# The earliest supported version of that library is 3.0, the latest
	398	+# supported version is 4.0 (4.1 is specifically not supported, as that
	399	+# changes the semantics of transactional databases). A list of available
	400	+# releases can be found at
	401	+#
	402	+# http://www.sleepycat.com/update/index.html
	403	+#
	404	+# Edit the variables DB and DBLIBVERto point to the db top directory
	405	+# and the subdirectory of PORT where you built it.
	406	+#DB=/usr/local/BerkeleyDB.4.0
	407	+#DBLIBVER=4.0
	408	+#DBINC=$(DB)/include
	409	+#DBLIB=$(DB)/lib
	410	+#_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb-$(DBLIBVER)
	411	+
	412	+# Historical Berkeley DB 1.85
	413	+#
	414	+# This module is deprecated; the 1.85 version of the Berkeley DB library has
	415	+# bugs that can cause data corruption. If you can, use later versions of the
	416	+# library instead, available from <http://www.sleepycat.com/>.
	417	+
	418	+#DB=/depot/sundry/src/berkeley-db/db.1.85
	419	+#DBPORT=$(DB)/PORT/irix.5.3
	420	+#bsddb185 bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a
	421	+
	422	+
	423	+
	424	+# Helper module for various ascii-encoders
	425	+#binascii binascii.c
	426	+
	427	+# Fred Drake's interface to the Python parser
	428	+#parser parsermodule.c
	429	+
	430	+# cStringIO and cPickle
	431	+#cStringIO cStringIO.c
	432	+#cPickle cPickle.c
	433	+
	434	+
	435	+# Lee Busby's SIGFPE modules.
	436	+# The library to link fpectl with is platform specific.
	437	+# Choose one of the options below for fpectl:
	438	+
	439	+# For SGI IRIX (tested on 5.3):
	440	+#fpectl fpectlmodule.c -lfpe
	441	+
	442	+# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):
	443	+# (Without the compiler you don't have -lsunmath.)
	444	+#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm
	445	+
	446	+# For other systems: see instructions in fpectlmodule.c.
	447	+#fpectl fpectlmodule.c ...
	448	+
	449	+# Test module for fpectl. No extra libraries needed.
	450	+#fpetest fpetestmodule.c
	451	+
	452	+# Andrew Kuchling's zlib module.
	453	+# This require zlib 1.1.3 (or later).
	454	+# See http://www.gzip.org/zlib/
	455	+#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
	456	+
	457	+# Interface to the Expat XML parser
	458	+#
	459	+# Expat was written by James Clark and is now maintained by a group of
	460	+# developers on SourceForge; see www.libexpat.org for more
	461	+# information. The pyexpat module was written by Paul Prescod after a
	462	+# prototype by Jack Jansen. Source of Expat 1.95.2 is included in
	463	+# Modules/expat/. Usage of a system shared libexpat.so/expat.dll is
	464	+# not advised.
	465	+#
	466	+# More information on Expat can be found at www.libexpat.org.
	467	+#
	468	+#EXPAT_DIR=/usr/local/src/expat-1.95.2
	469	+#pyexpat pyexpat.c -DHAVE_EXPAT_H -I$(EXPAT_DIR)/lib -L$(EXPAT_DIR) -lexpat
	470	+
	471	+
	472	+# Hye-Shik Chang's CJKCodecs
	473	+
	474	+# multibytecodec is required for all the other CJK codec modules
	475	+#_multibytecodec cjkcodecs/multibytecodec.c
	476	+
	477	+#_codecs_cn cjkcodecs/_codecs_cn.c
	478	+#_codecs_hk cjkcodecs/_codecs_hk.c
	479	+#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
	480	+#_codecs_jp cjkcodecs/_codecs_jp.c
	481	+#_codecs_kr cjkcodecs/_codecs_kr.c
	482	+#_codecs_tw cjkcodecs/_codecs_tw.c
	483	+
	484	+# Example -- included for reference only:
	485	+# xx xxmodule.c
	486	+
	487	+# Another example -- the 'xxsubtype' module shows C-level subtyping in action
	488	+xxsubtype xxsubtype.c

add hg and python

Keyboard shortcuts

General

Issues and pull requests

Issues, pull requests and Inbox

Repository code