{ spin_lock(&base->expiry_lock);} static inline void timer_base_unlock_expiry(struct timer_base *base){ spin_unlock(&base->expiry_lock);} /* * The counterpart to del_timer_wait_running(). * * If there is a waiter for base->expiry_lock, then it was waiting for the * timer callback to finish. Drop expiry_lock and reacquire it. That allows * the waiter to acquire the lock and make progress. */static void timer_sync_wait_running(struct timer_base *base) __releases(&base->lock) __releases(&base->expiry_lock) __acquires(&base->expiry_lock) __acquires(&base->lock){ if (atomic_read(&base->timer_waiters)) { raw_spin_unlock_irq(&base->lock); spin_unlock(&base->expiry_lock); spin_lock(&base->expiry_lock); raw_spin_lock_irq(&base->lock); }} /* * This function is called on PREEMPT_RT kernels when the fast path * deletion of a timer failed because the timer callback function was * running. * * This prevents priority inversion, if the softirq thread on a remote CPU * got preempted, and it prevents a life lock when the task which tries to * delete a timer preempted the softirq thread running the timer callback * function. */static void del_timer_wait_running(struct timer_list *timer){ u32 tf; tf = READ_ONCE(timer->flags); if (!(tf & (TIMER_MIGRATING | TIMER_IRQSAFE))) { struct timer_base *base = get_timer_base(tf); /* * Mark the base as contended and grab the expiry lock, * which is held by the softirq across the timer * callback. Drop the lock immediately so the softirq can * expire the next timer. In theory the timer could already * be running again, but that's more than unlikely and just * causes another wait loop. */ atomic_inc(&base->timer_waiters); spin_lock_bh(&base->expiry_lock); atomic_dec(&base->timer_waiters); spin_unlock_bh(&base->expiry_lock); }}#elsestatic inline void timer_base_init_expiry_lock(struct timer_base *base) { }static inline void timer_base_lock_expiry(struct timer_base *base) { }static inline void timer_base_unlock_expiry(struct timer_base *base) { }static inline void timer_sync_wait_running(struct timer_base *base) { }static inline void del_timer_wait_running(struct timer_list *timer) { }#endif /** * __timer_delete_sync - Internal function: Deactivate a timer and wait * for the handler to finish. * @timer: The timer to be deactivated * @shutdown: If true, @timer->function will be set to NULL under the * timer base lock which prevents rearming of @timer * * If @shutdown is not set the timer can be rearmed later. If the timer can * be rearmed concurrently, i.e. after dropping the base lock then the * return value is meaningless. * * If @shutdown is set then @timer->function is set to NULL under timer * base lock which prevents rearming of the timer. Any attempt to rearm * a shutdown timer is silently ignored. * * If the timer should be reused after shutdown it has to be initialized * again. * * Return: * * %0 - The timer was not pending * * %1 - The timer was pending and deactivated */static int __timer_delete_sync(struct timer_list *timer, bool shutdown){ int ret; #ifdef CONFIG_LOCKDEP unsigned long flags; /* * If lockdep gives a backtrace here, please reference * the synchronization rules above. */ local_irq_save(flags); lock_map_acquire(&timer->lockdep_map); lock_map_release(&timer->lockdep_map); local_irq_restore(flags);#endif /* * don't use it in hardirq context, because it * could lead to deadlock. */ WARN_ON(in_hardirq() && !(timer->flags & TIMER_IRQSAFE)); /* * Must be able to sleep on PREEMPT_RT because of the slowpath in * del_timer_wait_running(). */ if (IS_ENABLED(CONFIG_PREEMPT_RT) && !(timer->flags & TIMER_IRQSAFE)) lockdep_assert_preemption_enabled(); do { ret = __try_to_del_timer_sync(timer, shutdown); if (unlikely(ret < 0)) { del_timer_wait_running(timer); cpu_relax(); } } while (ret < 0); return ret;} /** * timer_delete_sync - Deactivate a timer and wait for the handler to finish. * @timer: The timer to be deactivated * * Synchronization rules: Callers must prevent restarting of the timer, * otherwise this function is meaningless. It must not be called from * interrupt contexts unless the timer is an irqsafe one. The caller must * not hold locks which would prevent completion of the timer's callback * function. The timer's handler must not call add_timer_on(). Upon exit * the timer is not queued and the handler is not running on any CPU. * * For !irqsafe timers, the caller must not hold locks that are held in * interrupt context. Even if the lock has nothing to do with the timer in * question. Here's why:: * * CPU0 CPU1 * ---- ---- * <SOFTIRQ> * call_timer_fn(); * base->running_timer = mytimer; * spin_lock_irq(somelock); * <IRQ> * spin_lock(somelock); * timer_delete_sync(mytimer); * while (base->running_timer == mytimer); * * Now timer_delete_sync() will never return and never release somelock. * The interrupt on the other CPU is waiting to grab somelock but it has * interrupted the softirq that CPU0 is waiting to finish. * * This function cannot guarantee that the timer is not rearmed again by * some concurrent or preempting code, right after it dropped the base * lock. If there is the possibility of a concurrent rearm then the return * value of the function is meaningless. * * If such a guarantee is needed, e.g. for teardown situations then use * timer_shutdown_sync() instead. * * Return: * * %0 - The timer was not pending * * %1 - The timer was pending and deactivated */int timer_delete_sync(struct timer_list *timer){ return __timer_delete_sync(timer, false);}EXPORT_SYMBOL(timer_delete_sync); /** * timer_shutdown_sync - Shutdown a timer and prevent rearming * @timer: The timer to be shutdown * * When the function returns it is guaranteed that: * - @timer is not queued * - The callback function of @timer is not running * - @timer cannot be enqueued again. Any attempt to rearm * @timer is silently ignored. * * See timer_delete_sync() for synchronization rules. * * This function is useful for final teardown of an infrastructure where * the timer is subject to a circular dependency problem. * * A common pattern for this is a timer and a workqueue where the timer can * schedule work and work can arm the timer. On shutdown the workqueue must * be destroyed and the timer must be prevented from rearming. Unless the * code has conditionals like 'if (mything->in_shutdown)' to prevent that * there is no way to get this correct with timer_delete_sync(). * * timer_shutdown_sync() is solving the problem. The correct ordering of * calls in this case is: * * timer_shutdown_sync(&mything->timer); * workqueue_destroy(&mything->workqueue); * * After this 'mything' can be safely freed. * * This obviously implies that the timer is not required to be functional * for the rest of the shutdown operation. * * Return: * * %0 - The timer was not pending * * %1 - The timer was pending */int timer_shutdown_sync(struct timer_list *timer){ return __timer_delete_sync(timer, true);}EXPORT_SYMBOL_GPL(timer_shutdown_sync); static void call_timer_fn(struct timer_list *timer, void (*fn)(struct timer_list *), unsigned long baseclk){ int count = preempt_count(); #ifdef CONFIG_LOCKDEP /* * It is permissible to free the timer from inside the * function that is called from it, this we need to take into * account for lockdep too. To avoid bogus "held lock freed" * warnings as well as problems when looking into * timer->lockdep_map, make a copy and use that here. */ struct lockdep_map lockdep_map; lockdep_copy_map(&lockdep_map, &timer->lockdep_map);#endif /* * Couple the lock chain with the lock chain at * timer_delete_sync() by acquiring the lock_map around the fn() * call here and in timer_delete_sync(). */ lock_map_acquire(&lockdep_map); trace_timer_expire_entry(timer, baseclk); fn(timer); trace_timer_expire_exit(timer); lock_map_release(&lockdep_map); if (count != preempt_count()) { WARN_ONCE(1, "timer: %pS preempt leak: %08x -> %08x\n", fn, count, preempt_count()); /* * Restore the preempt count. That gives us a decent * chance to survive and extract information. If the * callback kept a lock held, bad luck, but not worse * than the BUG() we had. */ preempt_count_set(count); }} static void expire_timers(struct timer_base *base, struct hlist_head *head){ /* * This value is required only for tracing. base->clk was * incremented directly before expire_timers was called. But expiry * is related to the old base->clk value. */ unsigned long baseclk = base->clk - 1; while (!hlist_empty(head)) { struct timer_list *timer; void (*fn)(struct timer_list *); timer = hlist_entry(head->first, struct timer_list, entry); base->running_timer = timer; detach_timer(timer, true); fn = timer->function; if (WARN_ON_ONCE(!fn)) { /* Should never happen. Emphasis on should! */ base->running_timer = NULL; continue; } if (timer->flags & TIMER_IRQSAFE) { raw_spin_unlock(&base->lock); call_timer_fn(timer, fn, baseclk); raw_spin_lock(&base->lock); base->running_timer = NULL; } else { raw_spin_unlock_irq(&base->lock); call_timer_fn(timer, fn, baseclk); raw_spin_lock_irq(&base->lock); base->running_timer = NULL; timer_sync_wait_running(base); } }} static int collect_expired_timers(struct timer_base *base, struct hlist_head *heads){ unsigned long clk = base->clk = base->next_expiry; struct hlist_head *vec; int i, levels = 0; unsigned int idx; for (i = 0; i < LVL_DEPTH; i++) { idx = (clk & LVL_MASK) + i * LVL_SIZE; if (__test_and_clear_bit(idx, base->pending_map)) { vec = base->vectors + idx; hlist_move_list(vec, heads++); levels++; } /* Is it time to look at the next level? */ if (clk & LVL_CLK_MASK) break; /* Shift clock for the next level granularity */ clk >>= LVL_CLK_SHIFT; } return levels;} /* * Find the next pending bucket of a level. Search from level start (@offset) * + @clk upwards and if nothing there, search from start of the level * (@offset) up to @offset + clk. */static int next_pending_bucket(struct timer_base *base, unsigned offset, unsigned clk){ unsigned pos, start = offset + clk; unsigned end = offset + LVL_SIZE; pos = find_next_bit(base->pending_map, end, start); if (pos < end) return pos - start; pos = find_next_bit(base->pending_map, start, offset); return pos < start ? pos + LVL_SIZE - start : -1;} /* * Search the first expiring timer in the various clock levels. Caller must * hold base->lock. * * Store next expiry time in base->next_expiry. */static void timer_recalc_next_expiry(struct timer_base *base){ unsigned long clk, next, adj; unsigned lvl, offset = 0; next = base->clk + TIMER_NEXT_MAX_DELTA; clk = base->clk; for (lvl = 0; lvl < LVL_DEPTH; lvl++, offset += LVL_SIZE) { int pos = next_pending_bucket(base, offset, clk & LVL_MASK); unsigned long lvl_clk = clk & LVL_CLK_MASK; if (pos >= 0) { unsigned long tmp = clk + (unsigned long) pos; tmp <<= LVL_SHIFT(lvl); if (time_before(tmp, next)) next = tmp; /* * If the next expiration happens before we reach * the next level, no need to check further. */ if (pos <= ((LVL_CLK_DIV - lvl_clk) & LVL_CLK_MASK)) break; } /* * Clock for the next level. If the current level clock lower * bits are zero, we look at the next level as is. If not we * need to advance it by one because that's going to be the * next expiring bucket in that level. base->clk is the next * expiring jiffy. So in case of: * * LVL5 LVL4 LVL3 LVL2 LVL1 LVL0 * 0 0 0 0 0 0 * * we have to look at all levels @index 0. With * * LVL5 LVL4 LVL3 LVL2 LVL1 LVL0 * 0 0 0 0 0 2 * * LVL0 has the next expiring bucket @index 2. The upper * levels have the next expiring bucket @index 1. * * In case that the propagation wraps the next level the same * rules apply: * * LVL5 LVL4 LVL3 LVL2 LVL1 LVL0 * 0 0 0 0 F 2 * * So after looking at LVL0 we get: * * LVL5 LVL4 LVL3 LVL2 LVL1 * 0 0 0 1 0 * * So no propagation from LVL1 to LVL2 because that happened * with the add already, but then we need to propagate further * from LVL2 to LVL3. * * So the simple check whether the lower bits of the current * level are 0 or not is sufficient for all cases. */ adj = lvl_clk ? 1 : 0; clk >>= LVL_CLK_SHIFT; clk += adj; } WRITE_ONCE(base->next_expiry, next); base->next_expiry_recalc = false; base->timers_pending = !(next == base->clk + TIMER_NEXT_MAX_DELTA);} #ifdef CONFIG_NO_HZ_COMMON/* * Check, if the next hrtimer event is before the next timer wheel * event: */static u64 cmp_next_hrtimer_event(u64 basem, u64 expires){ u64 nextevt = ktime_to_ns(hrtimer_get_next_event()); /* * If high resolution timers are enabled * hrtimer_get_next_event() returns KTIME_MAX. */ if (expires <= nextevt) return expires; /* * If the next timer is already expired, return the tick base * time so the tick is fired immediately. */ if (nextevt <= basem) return basem; /* * Round up to the next jiffy. High resolution timers are * off, so the hrtimers are expired in the tick and we need to * make sure that this tick really expires the timer to avoid * a ping pong of the nohz stop code. * * Use DIV_ROUND_UP_ULL to prevent gcc calling __divdi3 */ return DIV_ROUND_UP_ULL(nextevt, TICK_NSEC) * TICK_NSEC;} static unsigned long next_timer_interrupt(struct timer_base *base, unsigned long basej){ if (base->next_expiry_recalc) timer_recalc_next_expiry(base); /* * Move next_expiry for the empty base into the future to prevent an * unnecessary raise of the timer softirq when the next_expiry value * will be reached even if there is no timer pending. * * This update is also required to make timer_base::next_expiry values * easy comparable to find out which base holds the first pending timer. */ if (!base->timers_pending) WRITE_ONCE(base->next_expiry, basej + TIMER_NEXT_MAX_DELTA); return base->next_expiry;} static unsigned long fetch_next_timer_interrupt(unsigned long basej, u64 basem, struct timer_base *base_local, struct timer_base *base_global, struct timer_events *tevt){ unsigned long nextevt, nextevt_local, nextevt_global; bool local_first; nextevt_local = next_timer_interrupt(base_local, basej); nextevt_global = next_timer_interrupt(base_global, basej); local_first = time_before_eq(nextevt_local, nextevt_global); nextevt = local_first ? nextevt_local : nextevt_global; /* * If the @nextevt is at max. one tick away, use @nextevt and store * it in the local expiry value. The next global event is irrelevant in * this case and can be left as KTIME_MAX.Lines 1501–2000 of 2580. Previous lines Load more
{ spin_lock(&base->expiry_lock); } static inline void timer_base_unlock_expiry(struct timer_base *base) { spin_unlock(&base->expiry_lock); } /* * The counterpart to del_timer_wait_running(). * * If there is a waiter for base->expiry_lock, then it was waiting for the * timer callback to finish. Drop expiry_lock and reacquire it. That allows * the waiter to acquire the lock and make progress. */ static void timer_sync_wait_running(struct timer_base *base) __releases(&base->lock) __releases(&base->expiry_lock) __acquires(&base->expiry_lock) __acquires(&base->lock) { if (atomic_read(&base->timer_waiters)) { raw_spin_unlock_irq(&base->lock); spin_unlock(&base->expiry_lock); spin_lock(&base->expiry_lock); raw_spin_lock_irq(&base->lock); } } /* * This function is called on PREEMPT_RT kernels when the fast path * deletion of a timer failed because the timer callback function was * running. * * This prevents priority inversion, if the softirq thread on a remote CPU * got preempted, and it prevents a life lock when the task which tries to * delete a timer preempted the softirq thread running the timer callback * function. */ static void del_timer_wait_running(struct timer_list *timer) { u32 tf; tf = READ_ONCE(timer->flags); if (!(tf & (TIMER_MIGRATING | TIMER_IRQSAFE))) { struct timer_base *base = get_timer_base(tf); /* * Mark the base as contended and grab the expiry lock, * which is held by the softirq across the timer * callback. Drop the lock immediately so the softirq can * expire the next timer. In theory the timer could already * be running again, but that's more than unlikely and just * causes another wait loop. */ atomic_inc(&base->timer_waiters); spin_lock_bh(&base->expiry_lock); atomic_dec(&base->timer_waiters); spin_unlock_bh(&base->expiry_lock); } } #else static inline void timer_base_init_expiry_lock(struct timer_base *base) { } static inline void timer_base_lock_expiry(struct timer_base *base) { } static inline void timer_base_unlock_expiry(struct timer_base *base) { } static inline void timer_sync_wait_running(struct timer_base *base) { } static inline void del_timer_wait_running(struct timer_list *timer) { } #endif /** * __timer_delete_sync - Internal function: Deactivate a timer and wait * for the handler to finish. * @timer: The timer to be deactivated * @shutdown: If true, @timer->function will be set to NULL under the * timer base lock which prevents rearming of @timer * * If @shutdown is not set the timer can be rearmed later. If the timer can * be rearmed concurrently, i.e. after dropping the base lock then the * return value is meaningless. * * If @shutdown is set then @timer->function is set to NULL under timer * base lock which prevents rearming of the timer. Any attempt to rearm * a shutdown timer is silently ignored. * * If the timer should be reused after shutdown it has to be initialized * again. * * Return: * * %0 - The timer was not pending * * %1 - The timer was pending and deactivated */ static int __timer_delete_sync(struct timer_list *timer, bool shutdown) { int ret; #ifdef CONFIG_LOCKDEP unsigned long flags; /* * If lockdep gives a backtrace here, please reference * the synchronization rules above. */ local_irq_save(flags); lock_map_acquire(&timer->lockdep_map); lock_map_release(&timer->lockdep_map); local_irq_restore(flags); #endif /* * don't use it in hardirq context, because it * could lead to deadlock. */ WARN_ON(in_hardirq() && !(timer->flags & TIMER_IRQSAFE)); /* * Must be able to sleep on PREEMPT_RT because of the slowpath in * del_timer_wait_running(). */ if (IS_ENABLED(CONFIG_PREEMPT_RT) && !(timer->flags & TIMER_IRQSAFE)) lockdep_assert_preemption_enabled(); do { ret = __try_to_del_timer_sync(timer, shutdown); if (unlikely(ret < 0)) { del_timer_wait_running(timer); cpu_relax(); } } while (ret < 0); return ret; } /** * timer_delete_sync - Deactivate a timer and wait for the handler to finish. * @timer: The timer to be deactivated * * Synchronization rules: Callers must prevent restarting of the timer, * otherwise this function is meaningless. It must not be called from * interrupt contexts unless the timer is an irqsafe one. The caller must * not hold locks which would prevent completion of the timer's callback * function. The timer's handler must not call add_timer_on(). Upon exit * the timer is not queued and the handler is not running on any CPU. * * For !irqsafe timers, the caller must not hold locks that are held in * interrupt context. Even if the lock has nothing to do with the timer in * question. Here's why:: * * CPU0 CPU1 * ---- ---- * <SOFTIRQ> * call_timer_fn(); * base->running_timer = mytimer; * spin_lock_irq(somelock); * <IRQ> * spin_lock(somelock); * timer_delete_sync(mytimer); * while (base->running_timer == mytimer); * * Now timer_delete_sync() will never return and never release somelock. * The interrupt on the other CPU is waiting to grab somelock but it has * interrupted the softirq that CPU0 is waiting to finish. * * This function cannot guarantee that the timer is not rearmed again by * some concurrent or preempting code, right after it dropped the base * lock. If there is the possibility of a concurrent rearm then the return * value of the function is meaningless. * * If such a guarantee is needed, e.g. for teardown situations then use * timer_shutdown_sync() instead. * * Return: * * %0 - The timer was not pending * * %1 - The timer was pending and deactivated */ int timer_delete_sync(struct timer_list *timer) { return __timer_delete_sync(timer, false); } EXPORT_SYMBOL(timer_delete_sync); /** * timer_shutdown_sync - Shutdown a timer and prevent rearming * @timer: The timer to be shutdown * * When the function returns it is guaranteed that: * - @timer is not queued * - The callback function of @timer is not running * - @timer cannot be enqueued again. Any attempt to rearm * @timer is silently ignored. * * See timer_delete_sync() for synchronization rules. * * This function is useful for final teardown of an infrastructure where * the timer is subject to a circular dependency problem. * * A common pattern for this is a timer and a workqueue where the timer can * schedule work and work can arm the timer. On shutdown the workqueue must * be destroyed and the timer must be prevented from rearming. Unless the * code has conditionals like 'if (mything->in_shutdown)' to prevent that * there is no way to get this correct with timer_delete_sync(). * * timer_shutdown_sync() is solving the problem. The correct ordering of * calls in this case is: * * timer_shutdown_sync(&mything->timer); * workqueue_destroy(&mything->workqueue); * * After this 'mything' can be safely freed. * * This obviously implies that the timer is not required to be functional * for the rest of the shutdown operation. * * Return: * * %0 - The timer was not pending * * %1 - The timer was pending */ int timer_shutdown_sync(struct timer_list *timer) { return __timer_delete_sync(timer, true); } EXPORT_SYMBOL_GPL(timer_shutdown_sync); static void call_timer_fn(struct timer_list *timer, void (*fn)(struct timer_list *), unsigned long baseclk) { int count = preempt_count(); #ifdef CONFIG_LOCKDEP /* * It is permissible to free the timer from inside the * function that is called from it, this we need to take into * account for lockdep too. To avoid bogus "held lock freed" * warnings as well as problems when looking into * timer->lockdep_map, make a copy and use that here. */ struct lockdep_map lockdep_map; lockdep_copy_map(&lockdep_map, &timer->lockdep_map); #endif /* * Couple the lock chain with the lock chain at * timer_delete_sync() by acquiring the lock_map around the fn() * call here and in timer_delete_sync(). */ lock_map_acquire(&lockdep_map); trace_timer_expire_entry(timer, baseclk); fn(timer); trace_timer_expire_exit(timer); lock_map_release(&lockdep_map); if (count != preempt_count()) { WARN_ONCE(1, "timer: %pS preempt leak: %08x -> %08x\n", fn, count, preempt_count()); /* * Restore the preempt count. That gives us a decent * chance to survive and extract information. If the * callback kept a lock held, bad luck, but not worse * than the BUG() we had. */ preempt_count_set(count); } } static void expire_timers(struct timer_base *base, struct hlist_head *head) { /* * This value is required only for tracing. base->clk was * incremented directly before expire_timers was called. But expiry * is related to the old base->clk value. */ unsigned long baseclk = base->clk - 1; while (!hlist_empty(head)) { struct timer_list *timer; void (*fn)(struct timer_list *); timer = hlist_entry(head->first, struct timer_list, entry); base->running_timer = timer; detach_timer(timer, true); fn = timer->function; if (WARN_ON_ONCE(!fn)) { /* Should never happen. Emphasis on should! */ base->running_timer = NULL; continue; } if (timer->flags & TIMER_IRQSAFE) { raw_spin_unlock(&base->lock); call_timer_fn(timer, fn, baseclk); raw_spin_lock(&base->lock); base->running_timer = NULL; } else { raw_spin_unlock_irq(&base->lock); call_timer_fn(timer, fn, baseclk); raw_spin_lock_irq(&base->lock); base->running_timer = NULL; timer_sync_wait_running(base); } } } static int collect_expired_timers(struct timer_base *base, struct hlist_head *heads) { unsigned long clk = base->clk = base->next_expiry; struct hlist_head *vec; int i, levels = 0; unsigned int idx; for (i = 0; i < LVL_DEPTH; i++) { idx = (clk & LVL_MASK) + i * LVL_SIZE; if (__test_and_clear_bit(idx, base->pending_map)) { vec = base->vectors + idx; hlist_move_list(vec, heads++); levels++; } /* Is it time to look at the next level? */ if (clk & LVL_CLK_MASK) break; /* Shift clock for the next level granularity */ clk >>= LVL_CLK_SHIFT; } return levels; } /* * Find the next pending bucket of a level. Search from level start (@offset) * + @clk upwards and if nothing there, search from start of the level * (@offset) up to @offset + clk. */ static int next_pending_bucket(struct timer_base *base, unsigned offset, unsigned clk) { unsigned pos, start = offset + clk; unsigned end = offset + LVL_SIZE; pos = find_next_bit(base->pending_map, end, start); if (pos < end) return pos - start; pos = find_next_bit(base->pending_map, start, offset); return pos < start ? pos + LVL_SIZE - start : -1; } /* * Search the first expiring timer in the various clock levels. Caller must * hold base->lock. * * Store next expiry time in base->next_expiry. */ static void timer_recalc_next_expiry(struct timer_base *base) { unsigned long clk, next, adj; unsigned lvl, offset = 0; next = base->clk + TIMER_NEXT_MAX_DELTA; clk = base->clk; for (lvl = 0; lvl < LVL_DEPTH; lvl++, offset += LVL_SIZE) { int pos = next_pending_bucket(base, offset, clk & LVL_MASK); unsigned long lvl_clk = clk & LVL_CLK_MASK; if (pos >= 0) { unsigned long tmp = clk + (unsigned long) pos; tmp <<= LVL_SHIFT(lvl); if (time_before(tmp, next)) next = tmp; /* * If the next expiration happens before we reach * the next level, no need to check further. */ if (pos <= ((LVL_CLK_DIV - lvl_clk) & LVL_CLK_MASK)) break; } /* * Clock for the next level. If the current level clock lower * bits are zero, we look at the next level as is. If not we * need to advance it by one because that's going to be the * next expiring bucket in that level. base->clk is the next * expiring jiffy. So in case of: * * LVL5 LVL4 LVL3 LVL2 LVL1 LVL0 * 0 0 0 0 0 0 * * we have to look at all levels @index 0. With * * LVL5 LVL4 LVL3 LVL2 LVL1 LVL0 * 0 0 0 0 0 2 * * LVL0 has the next expiring bucket @index 2. The upper * levels have the next expiring bucket @index 1. * * In case that the propagation wraps the next level the same * rules apply: * * LVL5 LVL4 LVL3 LVL2 LVL1 LVL0 * 0 0 0 0 F 2 * * So after looking at LVL0 we get: * * LVL5 LVL4 LVL3 LVL2 LVL1 * 0 0 0 1 0 * * So no propagation from LVL1 to LVL2 because that happened * with the add already, but then we need to propagate further * from LVL2 to LVL3. * * So the simple check whether the lower bits of the current * level are 0 or not is sufficient for all cases. */ adj = lvl_clk ? 1 : 0; clk >>= LVL_CLK_SHIFT; clk += adj; } WRITE_ONCE(base->next_expiry, next); base->next_expiry_recalc = false; base->timers_pending = !(next == base->clk + TIMER_NEXT_MAX_DELTA); } #ifdef CONFIG_NO_HZ_COMMON /* * Check, if the next hrtimer event is before the next timer wheel * event: */ static u64 cmp_next_hrtimer_event(u64 basem, u64 expires) { u64 nextevt = ktime_to_ns(hrtimer_get_next_event()); /* * If high resolution timers are enabled * hrtimer_get_next_event() returns KTIME_MAX. */ if (expires <= nextevt) return expires; /* * If the next timer is already expired, return the tick base * time so the tick is fired immediately. */ if (nextevt <= basem) return basem; /* * Round up to the next jiffy. High resolution timers are * off, so the hrtimers are expired in the tick and we need to * make sure that this tick really expires the timer to avoid * a ping pong of the nohz stop code. * * Use DIV_ROUND_UP_ULL to prevent gcc calling __divdi3 */ return DIV_ROUND_UP_ULL(nextevt, TICK_NSEC) * TICK_NSEC; } static unsigned long next_timer_interrupt(struct timer_base *base, unsigned long basej) { if (base->next_expiry_recalc) timer_recalc_next_expiry(base); /* * Move next_expiry for the empty base into the future to prevent an * unnecessary raise of the timer softirq when the next_expiry value * will be reached even if there is no timer pending. * * This update is also required to make timer_base::next_expiry values * easy comparable to find out which base holds the first pending timer. */ if (!base->timers_pending) WRITE_ONCE(base->next_expiry, basej + TIMER_NEXT_MAX_DELTA); return base->next_expiry; } static unsigned long fetch_next_timer_interrupt(unsigned long basej, u64 basem, struct timer_base *base_local, struct timer_base *base_global, struct timer_events *tevt) { unsigned long nextevt, nextevt_local, nextevt_global; bool local_first; nextevt_local = next_timer_interrupt(base_local, basej); nextevt_global = next_timer_interrupt(base_global, basej); local_first = time_before_eq(nextevt_local, nextevt_global); nextevt = local_first ? nextevt_local : nextevt_global; /* * If the @nextevt is at max. one tick away, use @nextevt and store * it in the local expiry value. The next global event is irrelevant in * this case and can be left as KTIME_MAX.