The s3c24xx platform is gone, so this driver can be removed as well.
Showing the changes to include/linux/platform_data (1 of 6 files). Show all
Unified · Split
| @@ -1,51 +0,0 @@ | ||
| 1 | −/* SPDX-License-Identifier: GPL-2.0 */ | |
| 2 | −#ifndef _ARCH_MCI_H | |
| 3 | −#define _ARCH_MCI_H | |
| 4 | − | |
| 5 | −/** | |
| 6 | − * struct s3c24xx_mci_pdata - sd/mmc controller platform data | |
| 7 | − * @no_wprotect: Set this to indicate there is no write-protect switch. | |
| 8 | − * @no_detect: Set this if there is no detect switch. | |
| 9 | − * @wprotect_invert: Invert the default sense of the write protect switch. | |
| 10 | − * @use_dma: Set to allow the use of DMA. | |
| 11 | − * @gpio_detect: GPIO number for the card detect line. | |
| 12 | − * @gpio_wprotect: GPIO number for the write protect line. | |
| 13 | − * @ocr_avail: The mask of the available power states, non-zero to use. | |
| 14 | − * @set_power: Callback to control the power mode. | |
| 15 | − * | |
| 16 | − * The @gpio_detect is used for card detection when @no_wprotect is unset, | |
| 17 | − * and the default sense is that 0 returned from gpio_get_value() means | |
| 18 | − * that a card is inserted. If @detect_invert is set, then the value from | |
| 19 | − * gpio_get_value() is inverted, which makes 1 mean card inserted. | |
| 20 | − * | |
| 21 | − * The driver will use @gpio_wprotect to signal whether the card is write | |
| 22 | − * protected if @no_wprotect is not set. A 0 returned from gpio_get_value() | |
| 23 | − * means the card is read/write, and 1 means read-only. The @wprotect_invert | |
| 24 | − * will invert the value returned from gpio_get_value(). | |
| 25 | − * | |
| 26 | − * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set | |
| 27 | − * to a non-zero value, otherwise the default of 3.2-3.4V is used. | |
| 28 | − */ | |
| 29 | −struct s3c24xx_mci_pdata { | |
| 30 | − unsigned int no_wprotect:1; | |
| 31 | − unsigned int no_detect:1; | |
| 32 | − unsigned int wprotect_invert:1; | |
| 33 | − unsigned int use_dma:1; | |
| 34 | − | |
| 35 | − unsigned long ocr_avail; | |
| 36 | − void (*set_power)(unsigned char power_mode, | |
| 37 | − unsigned short vdd); | |
| 38 | − struct gpio_desc *bus[6]; | |
| 39 | −}; | |
| 40 | − | |
| 41 | −/** | |
| 42 | − * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device | |
| 43 | − * @pdata: The platform data | |
| 44 | − * | |
| 45 | − * Copy the platform data supplied by @pdata so that this can be marked | |
| 46 | − * __initdata. | |
| 47 | − */ | |
| 48 | −extern void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd); | |
| 49 | −extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata); | |
| 50 | − | |
| 51 | −#endif /* _ARCH_NCI_H */ | |