Merge with mainline to bring in the latest thermal and other changes.
Showing the changes to include/linux/platform_data (21 of 15497 files). Show all
Unified · Split
| @@ -27,6 +27,7 @@ struct samsung_i2s { · 26 unmodified lines | ||
| 27 | 27 | #define QUIRK_NO_MUXPSR (1 << 2) |
| 28 | 28 | #define QUIRK_NEED_RSTCLR (1 << 3) |
| 29 | 29 | #define QUIRK_SUPPORTS_TDM (1 << 4) |
| 30 | +#define QUIRK_SUPPORTS_IDMA (1 << 5) | |
| 30 | 31 | /* Quirks of the I2S controller */ |
| 31 | 32 | u32 quirks; |
| 32 | 33 | dma_addr_t idma_addr; |
| @@ -0,0 +1,18 @@ | ||
| 1 | +#ifndef __LINUX_PLATFORM_DATA_BCMGENET_H__ | |
| 2 | +#define __LINUX_PLATFORM_DATA_BCMGENET_H__ | |
| 3 | + | |
| 4 | +#include <linux/types.h> | |
| 5 | +#include <linux/if_ether.h> | |
| 6 | +#include <linux/phy.h> | |
| 7 | + | |
| 8 | +struct bcmgenet_platform_data { | |
| 9 | + bool mdio_enabled; | |
| 10 | + phy_interface_t phy_interface; | |
| 11 | + int phy_address; | |
| 12 | + int phy_speed; | |
| 13 | + int phy_duplex; | |
| 14 | + u8 mac_address[ETH_ALEN]; | |
| 15 | + int genet_version; | |
| 16 | +}; | |
| 17 | + | |
| 18 | +#endif | |
| @@ -0,0 +1,59 @@ | ||
| 1 | +/* | |
| 2 | + * Driver for the Synopsys DesignWare DMA Controller | |
| 3 | + * | |
| 4 | + * Copyright (C) 2007 Atmel Corporation | |
| 5 | + * Copyright (C) 2010-2011 ST Microelectronics | |
| 6 | + * | |
| 7 | + * This program is free software; you can redistribute it and/or modify | |
| 8 | + * it under the terms of the GNU General Public License version 2 as | |
| 9 | + * published by the Free Software Foundation. | |
| 10 | + */ | |
| 11 | +#ifndef _PLATFORM_DATA_DMA_DW_H | |
| 12 | +#define _PLATFORM_DATA_DMA_DW_H | |
| 13 | + | |
| 14 | +#include <linux/device.h> | |
| 15 | + | |
| 16 | +/** | |
| 17 | + * struct dw_dma_slave - Controller-specific information about a slave | |
| 18 | + * | |
| 19 | + * @dma_dev: required DMA master device. Depricated. | |
| 20 | + * @src_id: src request line | |
| 21 | + * @dst_id: dst request line | |
| 22 | + * @src_master: src master for transfers on allocated channel. | |
| 23 | + * @dst_master: dest master for transfers on allocated channel. | |
| 24 | + */ | |
| 25 | +struct dw_dma_slave { | |
| 26 | + struct device *dma_dev; | |
| 27 | + u8 src_id; | |
| 28 | + u8 dst_id; | |
| 29 | + u8 src_master; | |
| 30 | + u8 dst_master; | |
| 31 | +}; | |
| 32 | + | |
| 33 | +/** | |
| 34 | + * struct dw_dma_platform_data - Controller configuration parameters | |
| 35 | + * @nr_channels: Number of channels supported by hardware (max 8) | |
| 36 | + * @is_private: The device channels should be marked as private and not for | |
| 37 | + * by the general purpose DMA channel allocator. | |
| 38 | + * @chan_allocation_order: Allocate channels starting from 0 or 7 | |
| 39 | + * @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0. | |
| 40 | + * @block_size: Maximum block size supported by the controller | |
| 41 | + * @nr_masters: Number of AHB masters supported by the controller | |
| 42 | + * @data_width: Maximum data width supported by hardware per AHB master | |
| 43 | + * (0 - 8bits, 1 - 16bits, ..., 5 - 256bits) | |
| 44 | + */ | |
| 45 | +struct dw_dma_platform_data { | |
| 46 | + unsigned int nr_channels; | |
| 47 | + bool is_private; | |
| 48 | +#define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */ | |
| 49 | +#define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */ | |
| 50 | + unsigned char chan_allocation_order; | |
| 51 | +#define CHAN_PRIORITY_ASCENDING 0 /* chan0 highest */ | |
| 52 | +#define CHAN_PRIORITY_DESCENDING 1 /* chan7 highest */ | |
| 53 | + unsigned char chan_priority; | |
| 54 | + unsigned short block_size; | |
| 55 | + unsigned char nr_masters; | |
| 56 | + unsigned char data_width[4]; | |
| 57 | +}; | |
| 58 | + | |
| 59 | +#endif /* _PLATFORM_DATA_DMA_DW_H */ | |
| @@ -41,6 +41,7 @@ enum sdma_peripheral_type { · 40 unmodified lines | ||
| 41 | 41 | IMX_DMATYPE_ESAI, /* ESAI */ |
| 42 | 42 | IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ |
| 43 | 43 | IMX_DMATYPE_ASRC_SP, /* Shared ASRC */ |
| 44 | + IMX_DMATYPE_SAI, /* SAI */ | |
| 44 | 45 | }; |
| 45 | 46 | |
| 46 | 47 | enum imx_dma_prio { |
| @@ -1,24 +0,0 @@ | ||
| 1 | −/** | |
| 2 | − * dwc3-exynos.h - Samsung EXYNOS DWC3 Specific Glue layer, header. | |
| 3 | − * | |
| 4 | − * Copyright (c) 2012 Samsung Electronics Co., Ltd. | |
| 5 | − * http://www.samsung.com | |
| 6 | − * | |
| 7 | − * Author: Anton Tikhomirov <av.tikhomirov@samsung.com> | |
| 8 | − * | |
| 9 | − * This program is free software; you can redistribute it and/or modify | |
| 10 | − * it under the terms of the GNU General Public License as published by | |
| 11 | − * the Free Software Foundation; either version 2 of the License, or | |
| 12 | − * (at your option) any later version. | |
| 13 | − */ | |
| 14 | − | |
| 15 | −#ifndef _DWC3_EXYNOS_H_ | |
| 16 | −#define _DWC3_EXYNOS_H_ | |
| 17 | − | |
| 18 | −struct dwc3_exynos_data { | |
| 19 | − int phy_type; | |
| 20 | − int (*phy_init)(struct platform_device *pdev, int type); | |
| 21 | − int (*phy_exit)(struct platform_device *pdev, int type); | |
| 22 | −}; | |
| 23 | − | |
| 24 | −#endif /* _DWC3_EXYNOS_H_ */ | |
| @@ -42,8 +42,24 @@ struct elm_errorvec { · 41 unmodified lines | ||
| 42 | 42 | int error_loc[16]; |
| 43 | 43 | }; |
| 44 | 44 | |
| 45 | +#if IS_ENABLED(CONFIG_MTD_NAND_OMAP_BCH) | |
| 45 | 46 | void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, |
| 46 | 47 | struct elm_errorvec *err_vec); |
| 47 | 48 | int elm_config(struct device *dev, enum bch_ecc bch_type, |
| 48 | 49 | int ecc_steps, int ecc_step_size, int ecc_syndrome_size); |
| 50 | +#else | |
| 51 | +static inline void | |
| 52 | +elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, | |
| 53 | + struct elm_errorvec *err_vec) | |
| 54 | +{ | |
| 55 | +} | |
| 56 | + | |
| 57 | +static inline int elm_config(struct device *dev, enum bch_ecc bch_type, | |
| 58 | + int ecc_steps, int ecc_step_size, | |
| 59 | + int ecc_syndrome_size) | |
| 60 | +{ | |
| 61 | + return -ENOSYS; | |
| 62 | +} | |
| 63 | +#endif /* CONFIG_MTD_NAND_ECC_BCH */ | |
| 64 | + | |
| 49 | 65 | #endif /* __ELM_H */ |
| @@ -0,0 +1,32 @@ | ||
| 1 | +/* | |
| 2 | + * Copyright(c) 2014 Intel Corporation. | |
| 3 | + * | |
| 4 | + * This program is free software; you can redistribute it and/or modify it | |
| 5 | + * under the terms and conditions of the GNU General Public License, | |
| 6 | + * version 2, as published by the Free Software Foundation. | |
| 7 | + * | |
| 8 | + * This program is distributed in the hope it will be useful, but WITHOUT | |
| 9 | + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| 10 | + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| 11 | + * more details. | |
| 12 | + */ | |
| 13 | + | |
| 14 | +#ifndef GPIO_DW_APB_H | |
| 15 | +#define GPIO_DW_APB_H | |
| 16 | + | |
| 17 | +struct dwapb_port_property { | |
| 18 | + struct device_node *node; | |
| 19 | + const char *name; | |
| 20 | + unsigned int idx; | |
| 21 | + unsigned int ngpio; | |
| 22 | + unsigned int gpio_base; | |
| 23 | + unsigned int irq; | |
| 24 | + bool irq_shared; | |
| 25 | +}; | |
| 26 | + | |
| 27 | +struct dwapb_platform_data { | |
| 28 | + struct dwapb_port_property *properties; | |
| 29 | + unsigned int nports; | |
| 30 | +}; | |
| 31 | + | |
| 32 | +#endif | |
| @@ -0,0 +1,90 @@ | ||
| 1 | +/* | |
| 2 | + * MMC definitions for OMAP2 | |
| 3 | + * | |
| 4 | + * Copyright (C) 2006 Nokia Corporation | |
| 5 | + * | |
| 6 | + * This program is free software; you can redistribute it and/or modify | |
| 7 | + * it under the terms of the GNU General Public License version 2 as | |
| 8 | + * published by the Free Software Foundation. | |
| 9 | + */ | |
| 10 | + | |
| 11 | +/* | |
| 12 | + * struct omap_hsmmc_dev_attr.flags possibilities | |
| 13 | + * | |
| 14 | + * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can | |
| 15 | + * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag | |
| 16 | + * should be set if this is the case. See for example Section 22.5.3 | |
| 17 | + * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia | |
| 18 | + * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). | |
| 19 | + * | |
| 20 | + * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers | |
| 21 | + * don't work correctly on some MMC controller instances on some | |
| 22 | + * OMAP3 SoCs; this flag should be set if this is the case. See | |
| 23 | + * for example Advisory 2.1.1.128 "MMC: Multiple Block Read | |
| 24 | + * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ | |
| 25 | + * Revision F (October 2010) (SPRZ278F). | |
| 26 | + */ | |
| 27 | +#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) | |
| 28 | +#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) | |
| 29 | +#define OMAP_HSMMC_SWAKEUP_MISSING BIT(2) | |
| 30 | + | |
| 31 | +struct omap_hsmmc_dev_attr { | |
| 32 | + u8 flags; | |
| 33 | +}; | |
| 34 | + | |
| 35 | +struct mmc_card; | |
| 36 | + | |
| 37 | +struct omap_hsmmc_platform_data { | |
| 38 | + /* back-link to device */ | |
| 39 | + struct device *dev; | |
| 40 | + | |
| 41 | + /* set if your board has components or wiring that limits the | |
| 42 | + * maximum frequency on the MMC bus */ | |
| 43 | + unsigned int max_freq; | |
| 44 | + | |
| 45 | + /* Integrating attributes from the omap_hwmod layer */ | |
| 46 | + u8 controller_flags; | |
| 47 | + | |
| 48 | + /* Register offset deviation */ | |
| 49 | + u16 reg_offset; | |
| 50 | + | |
| 51 | + /* | |
| 52 | + * 4/8 wires and any additional host capabilities | |
| 53 | + * need to OR'd all capabilities (ref. linux/mmc/host.h) | |
| 54 | + */ | |
| 55 | + u32 caps; /* Used for the MMC driver on 2430 and later */ | |
| 56 | + u32 pm_caps; /* PM capabilities of the mmc */ | |
| 57 | + | |
| 58 | + /* switch pin can be for card detect (default) or card cover */ | |
| 59 | + unsigned cover:1; | |
| 60 | + | |
| 61 | + /* use the internal clock */ | |
| 62 | + unsigned internal_clock:1; | |
| 63 | + | |
| 64 | + /* nonremovable e.g. eMMC */ | |
| 65 | + unsigned nonremovable:1; | |
| 66 | + | |
| 67 | + /* eMMC does not handle power off when not in sleep state */ | |
| 68 | + unsigned no_regulator_off_init:1; | |
| 69 | + | |
| 70 | + /* we can put the features above into this variable */ | |
| 71 | +#define HSMMC_HAS_PBIAS (1 << 0) | |
| 72 | +#define HSMMC_HAS_UPDATED_RESET (1 << 1) | |
| 73 | +#define HSMMC_HAS_HSPE_SUPPORT (1 << 2) | |
| 74 | + unsigned features; | |
| 75 | + | |
| 76 | + int switch_pin; /* gpio (card detect) */ | |
| 77 | + int gpio_wp; /* gpio (write protect) */ | |
| 78 | + | |
| 79 | + int (*set_power)(struct device *dev, int power_on, int vdd); | |
| 80 | + void (*remux)(struct device *dev, int power_on); | |
| 81 | + /* Call back before enabling / disabling regulators */ | |
| 82 | + void (*before_set_reg)(struct device *dev, int power_on, int vdd); | |
| 83 | + /* Call back after enabling / disabling regulators */ | |
| 84 | + void (*after_set_reg)(struct device *dev, int power_on, int vdd); | |
| 85 | + /* if we have special card, init it using this callback */ | |
| 86 | + void (*init_card)(struct mmc_card *card); | |
| 87 | + | |
| 88 | + const char *name; | |
| 89 | + u32 ocr_mask; | |
| 90 | +}; | |
| @@ -0,0 +1,21 @@ | ||
| 1 | +/* | |
| 2 | + * Copyright(c) 2014 Intel Corporation. | |
| 3 | + * | |
| 4 | + * This program is free software; you can redistribute it and/or modify it | |
| 5 | + * under the terms and conditions of the GNU General Public License, | |
| 6 | + * version 2, as published by the Free Software Foundation. | |
| 7 | + * | |
| 8 | + * This program is distributed in the hope it will be useful, but WITHOUT | |
| 9 | + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| 10 | + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| 11 | + * more details. | |
| 12 | + */ | |
| 13 | + | |
| 14 | +#ifndef I2C_DESIGNWARE_H | |
| 15 | +#define I2C_DESIGNWARE_H | |
| 16 | + | |
| 17 | +struct dw_i2c_platform_data { | |
| 18 | + unsigned int i2c_scl_freq; | |
| 19 | +}; | |
| 20 | + | |
| 21 | +#endif | |
| @@ -0,0 +1,30 @@ | ||
| 1 | +/* | |
| 2 | + * isl9305 - Intersil ISL9305 DCDC regulator | |
| 3 | + * | |
| 4 | + * Copyright 2014 Linaro Ltd | |
| 5 | + * | |
| 6 | + * Author: Mark Brown <broonie@kernel.org> | |
| 7 | + * | |
| 8 | + * This program is free software; you can redistribute it and/or modify it | |
| 9 | + * under the terms of the GNU General Public License as published by the | |
| 10 | + * Free Software Foundation; either version 2 of the License, or (at your | |
| 11 | + * option) any later version. | |
| 12 | + */ | |
| 13 | + | |
| 14 | +#ifndef __ISL9305_H | |
| 15 | +#define __ISL9305_H | |
| 16 | + | |
| 17 | +#define ISL9305_DCD1 0 | |
| 18 | +#define ISL9305_DCD2 1 | |
| 19 | +#define ISL9305_LDO1 2 | |
| 20 | +#define ISL9305_LDO2 3 | |
| 21 | + | |
| 22 | +#define ISL9305_MAX_REGULATOR ISL9305_LDO2 | |
| 23 | + | |
| 24 | +struct regulator_init_data; | |
| 25 | + | |
| 26 | +struct isl9305_pdata { | |
| 27 | + struct regulator_init_data *init_data[ISL9305_MAX_REGULATOR]; | |
| 28 | +}; | |
| 29 | + | |
| 30 | +#endif | |
| @@ -136,6 +136,7 @@ struct lp855x_rom_data { · 135 unmodified lines | ||
| 136 | 136 | Only valid when mode is PWM_BASED. |
| 137 | 137 | * @size_program : total size of lp855x_rom_data |
| 138 | 138 | * @rom_data : list of new eeprom/eprom registers |
| 139 | + * @supply : regulator that supplies 3V input | |
| 139 | 140 | */ |
| 140 | 141 | struct lp855x_platform_data { |
| 141 | 142 | const char *name; |
| @@ -144,6 +145,7 @@ struct lp855x_platform_data { · 2 unmodified lines | ||
| 144 | 145 | unsigned int period_ns; |
| 145 | 146 | int size_program; |
| 146 | 147 | struct lp855x_rom_data *rom_data; |
| 148 | + struct regulator *supply; | |
| 147 | 149 | }; |
| 148 | 150 | |
| 149 | 151 | #endif |
| @@ -0,0 +1,22 @@ | ||
| 1 | +#ifndef __MMC_ATMEL_MCI_H | |
| 2 | +#define __MMC_ATMEL_MCI_H | |
| 3 | + | |
| 4 | +#include <linux/platform_data/dma-atmel.h> | |
| 5 | +#include <linux/platform_data/dma-dw.h> | |
| 6 | + | |
| 7 | +/** | |
| 8 | + * struct mci_dma_data - DMA data for MCI interface | |
| 9 | + */ | |
| 10 | +struct mci_dma_data { | |
| 11 | +#ifdef CONFIG_ARM | |
| 12 | + struct at_dma_slave sdata; | |
| 13 | +#else | |
| 14 | + struct dw_dma_slave sdata; | |
| 15 | +#endif | |
| 16 | +}; | |
| 17 | + | |
| 18 | +/* accessor macros */ | |
| 19 | +#define slave_data_ptr(s) (&(s)->sdata) | |
| 20 | +#define find_slave_dev(s) ((s)->sdata.dma_dev) | |
| 21 | + | |
| 22 | +#endif /* __MMC_ATMEL_MCI_H */ | |
| @@ -10,32 +10,8 @@ · 9 unmodified lines | ||
| 10 | 10 | |
| 11 | 11 | #define OMAP_MMC_MAX_SLOTS 2 |
| 12 | 12 | |
| 13 | −/* | |
| 14 | − * struct omap_mmc_dev_attr.flags possibilities | |
| 15 | − * | |
| 16 | − * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can | |
| 17 | − * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag | |
| 18 | − * should be set if this is the case. See for example Section 22.5.3 | |
| 19 | − * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia | |
| 20 | − * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). | |
| 21 | − * | |
| 22 | − * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers | |
| 23 | − * don't work correctly on some MMC controller instances on some | |
| 24 | − * OMAP3 SoCs; this flag should be set if this is the case. See | |
| 25 | − * for example Advisory 2.1.1.128 "MMC: Multiple Block Read | |
| 26 | − * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ | |
| 27 | − * Revision F (October 2010) (SPRZ278F). | |
| 28 | − */ | |
| 29 | −#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) | |
| 30 | −#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) | |
| 31 | −#define OMAP_HSMMC_SWAKEUP_MISSING BIT(2) | |
| 32 | − | |
| 33 | 13 | struct mmc_card; |
| 34 | 14 | |
| 35 | −struct omap_mmc_dev_attr { | |
| 36 | − u8 flags; | |
| 37 | −}; | |
| 38 | − | |
| 39 | 15 | struct omap_mmc_platform_data { |
| 40 | 16 | /* back-link to device */ |
| 41 | 17 | struct device *dev; |
| @@ -106,9 +82,6 @@ struct omap_mmc_platform_data { · 64 unmodified lines | ||
| 106 | 82 | unsigned vcc_aux_disable_is_sleep:1; |
| 107 | 83 | |
| 108 | 84 | /* we can put the features above into this variable */ |
| 109 | −#define HSMMC_HAS_PBIAS (1 << 0) | |
| 110 | −#define HSMMC_HAS_UPDATED_RESET (1 << 1) | |
| 111 | −#define HSMMC_HAS_HSPE_SUPPORT (1 << 2) | |
| 112 | 85 | #define MMC_OMAP7XX (1 << 3) |
| 113 | 86 | #define MMC_OMAP15XX (1 << 4) |
| 114 | 87 | #define MMC_OMAP16XX (1 << 5) |
| @@ -71,6 +71,7 @@ struct omap_nand_platform_data { · 70 unmodified lines | ||
| 71 | 71 | struct mtd_partition *parts; |
| 72 | 72 | int nr_parts; |
| 73 | 73 | bool dev_ready; |
| 74 | + bool flash_bbt; | |
| 74 | 75 | enum nand_io xfer_type; |
| 75 | 76 | int devsize; |
| 76 | 77 | enum omap_ecc ecc_opt; |
| @@ -55,9 +55,4 @@ struct sdhci_pxa_platdata { · 54 unmodified lines | ||
| 55 | 55 | unsigned int quirks2; |
| 56 | 56 | unsigned int pm_caps; |
| 57 | 57 | }; |
| 58 | − | |
| 59 | −struct sdhci_pxa { | |
| 60 | − u8 clk_enable; | |
| 61 | − u8 power_mode; | |
| 62 | −}; | |
| 63 | 58 | #endif /* _PXA_SDHCI_H_ */ |
| @@ -1,74 +0,0 @@ | ||
| 1 | −/* | |
| 2 | − * rcar_du.h -- R-Car Display Unit DRM driver | |
| 3 | − * | |
| 4 | − * Copyright (C) 2013 Renesas Corporation | |
| 5 | − * | |
| 6 | − * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) | |
| 7 | − * | |
| 8 | − * This program is free software; you can redistribute it and/or modify | |
| 9 | − * it under the terms of the GNU General Public License as published by | |
| 10 | − * the Free Software Foundation; either version 2 of the License, or | |
| 11 | − * (at your option) any later version. | |
| 12 | − */ | |
| 13 | − | |
| 14 | −#ifndef __RCAR_DU_H__ | |
| 15 | −#define __RCAR_DU_H__ | |
| 16 | − | |
| 17 | −#include <drm/drm_mode.h> | |
| 18 | − | |
| 19 | −enum rcar_du_output { | |
| 20 | − RCAR_DU_OUTPUT_DPAD0, | |
| 21 | − RCAR_DU_OUTPUT_DPAD1, | |
| 22 | − RCAR_DU_OUTPUT_LVDS0, | |
| 23 | − RCAR_DU_OUTPUT_LVDS1, | |
| 24 | − RCAR_DU_OUTPUT_TCON, | |
| 25 | − RCAR_DU_OUTPUT_MAX, | |
| 26 | −}; | |
| 27 | − | |
| 28 | −enum rcar_du_encoder_type { | |
| 29 | − RCAR_DU_ENCODER_UNUSED = 0, | |
| 30 | − RCAR_DU_ENCODER_NONE, | |
| 31 | − RCAR_DU_ENCODER_VGA, | |
| 32 | − RCAR_DU_ENCODER_LVDS, | |
| 33 | −}; | |
| 34 | − | |
| 35 | −struct rcar_du_panel_data { | |
| 36 | − unsigned int width_mm; /* Panel width in mm */ | |
| 37 | − unsigned int height_mm; /* Panel height in mm */ | |
| 38 | − struct drm_mode_modeinfo mode; | |
| 39 | −}; | |
| 40 | − | |
| 41 | −struct rcar_du_connector_lvds_data { | |
| 42 | − struct rcar_du_panel_data panel; | |
| 43 | −}; | |
| 44 | − | |
| 45 | −struct rcar_du_connector_vga_data { | |
| 46 | − /* TODO: Add DDC information for EDID retrieval */ | |
| 47 | −}; | |
| 48 | − | |
| 49 | −/* | |
| 50 | − * struct rcar_du_encoder_data - Encoder platform data | |
| 51 | − * @type: the encoder type (RCAR_DU_ENCODER_*) | |
| 52 | − * @output: the DU output the connector is connected to (RCAR_DU_OUTPUT_*) | |
| 53 | − * @connector.lvds: platform data for LVDS connectors | |
| 54 | − * @connector.vga: platform data for VGA connectors | |
| 55 | − * | |
| 56 | − * Encoder platform data describes an on-board encoder, its associated DU SoC | |
| 57 | − * output, and the connector. | |
| 58 | − */ | |
| 59 | −struct rcar_du_encoder_data { | |
| 60 | − enum rcar_du_encoder_type type; | |
| 61 | − enum rcar_du_output output; | |
| 62 | − | |
| 63 | − union { | |
| 64 | − struct rcar_du_connector_lvds_data lvds; | |
| 65 | − struct rcar_du_connector_vga_data vga; | |
| 66 | − } connector; | |
| 67 | −}; | |
| 68 | − | |
| 69 | −struct rcar_du_platform_data { | |
| 70 | − struct rcar_du_encoder_data *encoders; | |
| 71 | − unsigned int num_encoders; | |
| 72 | −}; | |
| 73 | − | |
| 74 | −#endif /* __RCAR_DU_H__ */ | |
| @@ -1,27 +0,0 @@ | ||
| 1 | −/* | |
| 2 | − * Copyright (C) 2012 Samsung Electronics Co.Ltd | |
| 3 | − * http://www.samsung.com/ | |
| 4 | − * Author: Praveen Paneri <p.paneri@samsung.com> | |
| 5 | − * | |
| 6 | − * Defines platform data for samsung usb phy driver. | |
| 7 | − * | |
| 8 | − * This program is free software; you can redistribute it and/or modify it | |
| 9 | − * under the terms of the GNU General Public License as published by the | |
| 10 | − * Free Software Foundation; either version 2 of the License, or (at your | |
| 11 | − * option) any later version. | |
| 12 | − */ | |
| 13 | − | |
| 14 | −#ifndef __SAMSUNG_USBPHY_PLATFORM_H | |
| 15 | −#define __SAMSUNG_USBPHY_PLATFORM_H | |
| 16 | − | |
| 17 | −/** | |
| 18 | − * samsung_usbphy_data - Platform data for USB PHY driver. | |
| 19 | − * @pmu_isolation: Function to control usb phy isolation in PMU. | |
| 20 | − */ | |
| 21 | −struct samsung_usbphy_data { | |
| 22 | − void (*pmu_isolation)(int on); | |
| 23 | −}; | |
| 24 | − | |
| 25 | −extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd); | |
| 26 | − | |
| 27 | −#endif /* __SAMSUNG_USBPHY_PLATFORM_H */ | |
| @@ -38,9 +38,6 @@ struct omap_uart_port_info { · 37 unmodified lines | ||
| 38 | 38 | unsigned int dma_rx_timeout; |
| 39 | 39 | unsigned int autosuspend_timeout; |
| 40 | 40 | unsigned int dma_rx_poll_rate; |
| 41 | − int DTR_gpio; | |
| 42 | − int DTR_inverted; | |
| 43 | − int DTR_present; | |
| 44 | 41 | |
| 45 | 42 | int (*get_context_loss_count)(struct device *); |
| 46 | 43 | void (*enable_wakeup)(struct device *, bool); |
| @@ -24,7 +24,6 @@ · 23 unmodified lines | ||
| 24 | 24 | #define ST21NFCA_HCI_DRIVER_NAME "st21nfca_hci" |
| 25 | 25 | |
| 26 | 26 | struct st21nfca_nfc_platform_data { |
| 27 | − unsigned int gpio_irq; | |
| 28 | 27 | unsigned int gpio_ena; |
| 29 | 28 | unsigned int irq_polarity; |
| 30 | 29 | }; |
| @@ -24,7 +24,6 @@ · 23 unmodified lines | ||
| 24 | 24 | #define ST21NFCB_NCI_DRIVER_NAME "st21nfcb_nci" |
| 25 | 25 | |
| 26 | 26 | struct st21nfcb_nfc_platform_data { |
| 27 | − unsigned int gpio_irq; | |
| 28 | 27 | unsigned int gpio_reset; |
| 29 | 28 | unsigned int irq_polarity; |
| 30 | 29 | }; |
| @@ -1,34 +0,0 @@ | ||
| 1 | −/* | |
| 2 | − * Copyright (C) 2011 Google, Inc. | |
| 3 | − * | |
| 4 | − * Author: | |
| 5 | − * Colin Cross <ccross@android.com> | |
| 6 | − * Olof Johansson <olof@lixom.net> | |
| 7 | − * | |
| 8 | − * This software is licensed under the terms of the GNU General Public | |
| 9 | − * License version 2, as published by the Free Software Foundation, and | |
| 10 | − * may be copied, distributed, and modified under those terms. | |
| 11 | − * | |
| 12 | − * This program is distributed in the hope that it will be useful, | |
| 13 | − * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 14 | − * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 15 | − * GNU General Public License for more details. | |
| 16 | − * | |
| 17 | − */ | |
| 18 | − | |
| 19 | −#ifndef __TEGRA_EMC_H_ | |
| 20 | −#define __TEGRA_EMC_H_ | |
| 21 | − | |
| 22 | −#define TEGRA_EMC_NUM_REGS 46 | |
| 23 | − | |
| 24 | −struct tegra_emc_table { | |
| 25 | − unsigned long rate; | |
| 26 | − u32 regs[TEGRA_EMC_NUM_REGS]; | |
| 27 | −}; | |
| 28 | − | |
| 29 | −struct tegra_emc_pdata { | |
| 30 | − int num_tables; | |
| 31 | − struct tegra_emc_table *tables; | |
| 32 | −}; | |
| 33 | − | |
| 34 | −#endif | |