Merge tag 'mac80211-next-for-davem-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says: ==================== Another set of changes, including * many 6 GHz changes, though it's not _quite_ complete (I left out scanning for now, we're still discussing) * allow userspace SA-query processing for operating channel validation * TX status for control port TX, for AP-side operation * more per-STA/TID control options * move to kHz for channels, for future S1G operation * various other small changes ====================

David S. Miller committed 6 years ago

Commit 1079a342 parents 3988460 093a48d35 files · +1575 −288Browse files

Showing the changes to include/uapi/linux (2 of 35 files). Show all

Unified · Split

2 files

include/uapi/linux/nl80211.h +100 −26
include/uapi/linux/wireless.h +5 −1

include/uapi/linux/nl80211.h+100−26

  *	to get a list of all present wiphys.
  * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
  *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the
+ *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
- *	attributes determining the channel width; this is used for setting
+ *	%NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the
- *	monitor mode channel),  %NL80211_ATTR_WIPHY_RETRY_SHORT,
+ *	channel width; this is used for setting monitor mode channel),
- *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+ *	%NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG,
- *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
+ *	%NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or
- *	However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
+ *	%NL80211_ATTR_WIPHY_RTS_THRESHOLD.  However, for setting the channel,
- *	instead, the support here is for backward compatibility only.
+ *	see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward
+ *	compatibility only.
  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
  *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
  *	%NL80211_ATTR_WIPHY_NAME.
  *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
  *	%NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
  *	The channel to use can be set on the interface or be given using the
- *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
+ *	%NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the
+ *	attributes determining channel width.
  * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
  * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
  * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
  *	interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
  *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
  *	the SSID (mainly for association, but is included in authentication
- *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
+ *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
- *	to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
+ *	%NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the
- *	is used to specify the authentication type. %NL80211_ATTR_IE is used to
+ *	channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
- *	define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
+ *	authentication type. %NL80211_ATTR_IE is used to define IEs
- *	to be added to the frame.
+ *	(VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
+ *	to the frame.
  *	When used as an event, this reports reception of an Authentication
  *	frame in station and IBSS modes when the local MLME processed the
  *	frame, i.e., it was for the local STA and was received in correct
  *	requests to connect to a specified network but without separating
  *	auth and assoc steps. For this, you need to specify the SSID in a
  *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
- *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
+ *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE,
- *	%NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ *	%NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ,
+ *	%NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT,
  *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
  *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
  *	%NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and
  *	dropped because it did not include a valid MME MIC while beacon
  *	protection was enabled (BIGTK configured in station mode).
  *
+ * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control
+ *	port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME.
+ *	%NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME
+ *	includes the contents of the frame. %NL80211_ATTR_ACK flag is included
+ *	if the recipient acknowledged the frame.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
 	NL80211_CMD_UNPROT_BEACON,
+	NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
 	/* add new commands above here */
 	/* used to define NL80211_CMD_MAX below */
  *	of &enum nl80211_chan_width, describing the channel width. See the
  *	documentation of the enum for more information.
  * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the
- *	channel, used for anything but 20 MHz bandwidth
+ *	channel, used for anything but 20 MHz bandwidth. In S1G this is the
+ *	operating channel center frequency.
  * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the
  *	channel, used only for 80+80 MHz bandwidth
  * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
  *	entry without having to force a disconnection after the PMK timeout. If
  *	no roaming occurs between the reauth threshold and PMK expiration,
  *	disassociation is still forced.
- *
  * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the
  *	%NL80211_CMD_REGISTER_FRAME command, see the description there.
+ * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated
+ *	%NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with
+ *	an %NL80211_ATTR_WIPHY_FREQ_OFFSET.
+ * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the
+ *	first channel segment specified in %NL80211_ATTR_CENTER_FREQ1.
+ * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies
+ *
+ * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
+ *	association request when used with NL80211_CMD_NEW_STATION).
  *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
 	NL80211_ATTR_PMK_REAUTH_THRESHOLD,
 	NL80211_ATTR_RECEIVE_MULTICAST,
+	NL80211_ATTR_WIPHY_FREQ_OFFSET,
+	NL80211_ATTR_CENTER_FREQ1_OFFSET,
+	NL80211_ATTR_SCAN_FREQ_KHZ,
+	NL80211_ATTR_HE_6GHZ_CAPABILITY,
 	/* add attributes here, update the policy in nl80211.c */
  *     defined in HE capabilities IE
  * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
  *     defined
+ * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16),
+ *	given for all 6 GHz band channels
  * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_band_iftype_attr {
 	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY,
 	NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
 	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
+	NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA,
 	/* keep last */
 	__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
  *	(see &enum nl80211_wmm_rule)
  * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
  *	in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
 	NL80211_FREQUENCY_ATTR_NO_10MHZ,
 	NL80211_FREQUENCY_ATTR_WMM,
 	NL80211_FREQUENCY_ATTR_NO_HE,
+	NL80211_FREQUENCY_ATTR_OFFSET,
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
  * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
  *	Contains a nested array of signal strength attributes (u8, dBm),
  *	using the nesting index as the antenna number.
+ * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
 	NL80211_BSS_PARENT_TSF,
 	NL80211_BSS_PARENT_BSSID,
 	NL80211_BSS_CHAIN_SIGNAL,
+	NL80211_BSS_FREQUENCY_OFFSET,
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
 	NL80211_TID_CONFIG_DISABLE,
 };
+/* enum nl80211_tx_rate_setting - TX rate configuration type
+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
+ */
+enum nl80211_tx_rate_setting {
+	NL80211_TX_RATE_AUTOMATIC,
+	NL80211_TX_RATE_LIMITED,
+	NL80211_TX_RATE_FIXED,
+};
 /* enum nl80211_tid_config_attr - TID specific configuration.
  * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values
  * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported
  *	(%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
  * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
  *	per peer instead.
- * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if no peer
+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates
- *	is selected, if set indicates that the new configuration overrides
+ *	that the new configuration overrides all previous peer
- *	all previous peer configurations, otherwise previous peer specific
+ *	configurations, otherwise previous peer specific configurations
- *	configurations should be left untouched. If peer is selected then
+ *	should be left untouched.
- *	it will reset particular TID configuration of that peer and it will
- *	not accept other TID config attributes along with peer.
  * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7)
  *	Its type is u16.
  * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID.
  *	&NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and
  *	the max value is advertised by the driver in this attribute on
  *	output in wiphy capabilities.
- * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable aggregation for the TIDs
+ * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation
- *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. Its type is u8, using
+ *	for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
- *	the values from &nl80211_tid_config.
+ *	Its type is u8, using the values from &nl80211_tid_config.
  * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs
  *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using
  *	the values from &nl80211_tid_config.
+ * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation
+ *	for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
+ *	Its type is u8, using the values from &nl80211_tid_config.
+ * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful
+ *	to notfiy the driver that what type of txrate should be used
+ *	for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using
+ *	the values form &nl80211_tx_rate_setting.
+ * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied
+ *	with the parameters passed through %NL80211_ATTR_TX_RATES.
+ *	configuration is applied to the data frame for the tid to that connected
+ *	station.
  */
 enum nl80211_tid_config_attr {
 	__NL80211_TID_CONFIG_ATTR_INVALID,
 	NL80211_TID_CONFIG_ATTR_RETRY_LONG,
 	NL80211_TID_CONFIG_ATTR_AMPDU_CTRL,
 	NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL,
+	NL80211_TID_CONFIG_ATTR_AMSDU_CTRL,
+	NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE,
+	NL80211_TID_CONFIG_ATTR_TX_RATE,
 	/* keep last */
 	__NL80211_TID_CONFIG_ATTR_AFTER_LAST,
 #define NL80211_KCK_LEN			16
 #define NL80211_KEK_LEN			16
+#define NL80211_KCK_EXT_LEN		24
+#define NL80211_KEK_EXT_LEN		32
 #define NL80211_REPLAY_CTR_LEN		8
 /**
  * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
  * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
  * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
+ * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type)
  * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
  * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
  */
 	NL80211_REKEY_DATA_KEK,
 	NL80211_REKEY_DATA_KCK,
 	NL80211_REKEY_DATA_REPLAY_CTR,
+	NL80211_REKEY_DATA_AKM,
 	/* keep last */
 	NUM_NL80211_REKEY_DATA,
  * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations
  *	are possible for multicast frames and those will be reported properly.
  *
+ * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and
+ *	reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to
+ *	report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be
+ *	included in the scan request.
+ *
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver
+ *	can report tx status for control port over nl80211 tx operations.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
 	NL80211_EXT_FEATURE_DEL_IBSS_STA,
 	NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS,
 	NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT,
+	NL80211_EXT_FEATURE_SCAN_FREQ_KHZ,
+	NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS,
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
  * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
  *	only have supported rates and no additional capabilities (unless
  *	added by userspace explicitly.)
+ * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with
+ *	%NL80211_ATTR_SCAN_FREQ_KHZ. This also means
+ *	%NL80211_ATTR_SCAN_FREQUENCIES will not be included.
  */
 enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
 	NL80211_SCAN_FLAG_HIGH_ACCURACY				= 1<<10,
 	NL80211_SCAN_FLAG_RANDOM_SN				= 1<<11,
 	NL80211_SCAN_FLAG_MIN_PREQ_CONTENT			= 1<<12,
+	NL80211_SCAN_FLAG_FREQ_KHZ				= 1<<13,
 };
 /**

include/uapi/linux/wireless.h+5−1

 #include <linux/socket.h>		/* for "struct sockaddr" et al	*/
 #include <linux/if.h>			/* for IFNAMSIZ and co... */
-#include <stddef.h>                     /* for offsetof */
+#ifdef __KERNEL__
+#	include <linux/stddef.h>	/* for offsetof */
+#else
+#	include <stddef.h>		/* for offsetof */
+#endif
 /***************************** VERSION *****************************/
 /*