Pull networking updates from Jakub Kicinski: "Core & protocols: - Continue Netlink conversions to per-namespace RTNL lock (IPv4 routing, routing rules, routing next hops, ARP ioctls) - Continue extending the use of netdev instance locks. As a driver opt-in protect queue operations and (in due course) ethtool operations with the instance lock and not RTNL lock. - Support collecting TCP timestamps (data submitted, sent, acked) in BPF, allowing for transparent (to the application) and lower overhead tracking of TCP RPC performance. - Tweak existing networking Rx zero-copy infra to support zero-copy Rx via io_uring. - Optimize MPTCP performance in single subflow mode by 29%. - Enable GRO on packets which went thru XDP CPU redirect (were queued for processing on a different CPU). Improving TCP stream performance up to 2x. - Improve performance of contended connect() by 200% by searching for an available 4-tuple under RCU rather than a spin lock. Bring an additional 229% improvement by tweaking hash distribution. - Avoid unconditionally touching sk_tsflags on RX, improving performance under UDP flood by as much as 10%. - Avoid skb_clone() dance in ping_rcv() to improve performance under ping flood. - Avoid FIB lookup in netfilter if socket is available, 20% perf win. - Rework network device creation (in-kernel) API to more clearly identify network namespaces and their roles. There are up to 4 namespace roles but we used to have just 2 netns pointer arguments, interpreted differently based on context. - Use sysfs_break_active_protection() instead of trylock to avoid deadlocks between unregistering objects and sysfs access. - Add a new sysctl and sockopt for capping max retransmit timeout in TCP. - Support masking port and DSCP in routing rule matches. - Support dumping IPv4 multicast addresses with RTM_GETMULTICAST. - Support specifying at what time packet should be sent on AF_XDP sockets. - Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users. - Add Netlink YAML spec for WiFi (nl80211) and conntrack. - Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols which only need to be exported when IPv6 support is built as a module. - Age FDB entries based on Rx not Tx traffic in VxLAN, similar to normal bridging. - Allow users to specify source port range for GENEVE tunnels. - netconsole: allow attaching kernel release, CPU ID and task name to messages as metadata Driver API: - Continue rework / fixing of Energy Efficient Ethernet (EEE) across the SW layers. Delegate the responsibilities to phylink where possible. Improve its handling in phylib. - Support symmetric OR-XOR RSS hashing algorithm. - Support tracking and preserving IRQ affinity by NAPI itself. - Support loopback mode speed selection for interface selftests. Device drivers: - Remove the IBM LCS driver for s390 - Remove the sb1000 cable modem driver - Add support for SFP module access over SMBus - Add MCTP transport driver for MCTP-over-USB - Enable XDP metadata support in multiple drivers - Ethernet high-speed NICs: - Broadcom (bnxt): - add PCIe TLP Processing Hints (TPH) support for new AMD platforms - support dumping RoCE queue state for debug - opt into instance locking - Intel (100G, ice, idpf): - ice: rework MSI-X IRQ management and distribution - ice: support for E830 devices - iavf: add support for Rx timestamping - iavf: opt into instance locking - nVidia/Mellanox: - mlx4: use page pool memory allocator for Rx - mlx5: support for one PTP device per hardware clock - mlx5: support for 200Gbps per-lane link modes - mlx5: move IPSec policy check after decryption - AMD/Solarflare: - support FW flashing via devlink - Cisco (enic): - use page pool memory allocator for Rx - enable 32, 64 byte CQEs - get max rx/tx ring size from the device - Meta (fbnic): - support flow steering and RSS configuration - report queue stats - support TCP segmentation - support IRQ coalescing - support ring size configuration - Marvell/Cavium: - support AF_XDP - Wangxun: - support for PTP clock and timestamping - Huawei (hibmcge): - checksum offload - add more statistics - Ethernet virtual: - VirtIO net: - aggressively suppress Tx completions, improve perf by 96% with 1 CPU and 55% with 2 CPUs - expose NAPI to IRQ mapping and persist NAPI settings - Google (gve): - support XDP in DQO RDA Queue Format - opt into instance locking - Microsoft vNIC: - support BIG TCP - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - cleanup Tx and Tx clock setting and other link-focused cleanups - enable SGMII and 2500BASEX mode switching for Intel platforms - support Sophgo SG2044 - Broadcom switches (b53): - support for BCM53101 - TI: - iep: add perout configuration support - icssg: support XDP - Cadence (macb): - implement BQL - Xilinx (axinet): - support dynamic IRQ moderation and changing coalescing at runtime - implement BQL - report standard stats - MediaTek: - support phylink managed EEE - Intel: - igc: don't restart the interface on every XDP program change - RealTek (r8169): - support reading registers of internal PHYs directly - increase max jumbo packet size on RTL8125/RTL8126 - Airoha: - support for RISC-V NPU packet processing unit - enable scatter-gather and support MTU up to 9kB - Tehuti (tn40xx): - support cards with TN4010 MAC and an Aquantia AQR105 PHY - Ethernet PHYs: - support for TJA1102S, TJA1121 - dp83tg720: add randomized polling intervals for link detection - dp83822: support changing the transmit amplitude voltage - support for LEDs on 88q2xxx - CAN: - canxl: support Remote Request Substitution bit access - flexcan: add S32G2/S32G3 SoC - WiFi: - remove cooked monitor support - strict mode for better AP testing - basic EPCS support - OMI RX bandwidth reduction support - batman-adv: add support for jumbo frames - WiFi drivers: - RealTek (rtw88): - support RTL8814AE and RTL8814AU - RealTek (rtw89): - switch using wiphy_lock and wiphy_work - add BB context to manipulate two PHY as preparation of MLO - improve BT-coexistence mechanism to play A2DP smoothly - Intel (iwlwifi): - add new iwlmld sub-driver for latest HW/FW combinations - MediaTek (mt76): - preparation for mt7996 Multi-Link Operation (MLO) support - Qualcomm/Atheros (ath12k): - continued work on MLO - Silabs (wfx): - Wake-on-WLAN support - Bluetooth: - add support for skb TX SND/COMPLETION timestamping - hci_core: enable buffer flow control for SCO/eSCO - coredump: log devcd dumps into the monitor - Bluetooth drivers: - intel: add support to configure TX power - nxp: handle bootloader error during cmd5 and cmd7" * tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits) unix: fix up for "apparmor: add fine grained af_unix mediation" mctp: Fix incorrect tx flow invalidation condition in mctp-i2c net: usb: asix: ax88772: Increase phy_name size net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string net: libwx: fix Tx L4 checksum net: libwx: fix Tx descriptor content for some tunnel packets atm: Fix NULL pointer dereference net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus net: phy: aquantia: add essential functions to aqr105 driver net: phy: aquantia: search for firmware-name in fwnode net: phy: aquantia: add probe function to aqr105 for firmware loading net: phy: Add swnode support to mdiobus_scan gve: add XDP DROP and PASS support for DQ gve: update XDP allocation path support RX buffer posting gve: merge packet buffer size fields gve: update GQ RX to use buf_size gve: introduce config-based allocation for XDP gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics ...
Showing the changes to include/linux/platform_data (1 of 1522 files). Show all
Unified · Split
| @@ -0,0 +1,94 @@ | |||
| 1 | /* SPDX-License-Identifier: GPL-2.0 */ | ||
| 2 | /* | ||
| 3 | * Intel Core SoC Power Management Controller Header File | ||
| 4 | * | ||
| 5 | * Copyright (c) 2025, Intel Corporation. | ||
| 6 | * All Rights Reserved. | ||
| 7 | * | ||
| 8 | */ | ||
| 9 | #ifndef INTEL_PMC_IPC_H | ||
| 10 | #define INTEL_PMC_IPC_H | ||
| 11 | #include <linux/acpi.h> | ||
| 12 | |||
| 13 | #define IPC_SOC_REGISTER_ACCESS 0xAA | ||
| 14 | #define IPC_SOC_SUB_CMD_READ 0x00 | ||
| 15 | #define IPC_SOC_SUB_CMD_WRITE 0x01 | ||
| 16 | #define PMC_IPCS_PARAM_COUNT 7 | ||
| 17 | #define VALID_IPC_RESPONSE 5 | ||
| 18 | |||
| 19 | struct pmc_ipc_cmd { | ||
| 20 | u32 cmd; | ||
| 21 | u32 sub_cmd; | ||
| 22 | u32 size; | ||
| 23 | u32 wbuf[4]; | ||
| 24 | }; | ||
| 25 | |||
| 26 | struct pmc_ipc_rbuf { | ||
| 27 | u32 buf[4]; | ||
| 28 | }; | ||
| 29 | |||
| 30 | /** | ||
| 31 | * intel_pmc_ipc() - PMC IPC Mailbox accessor | ||
| 32 | * @ipc_cmd: Prepared input command to send | ||
| 33 | * @rbuf: Allocated array for returned IPC data | ||
| 34 | * | ||
| 35 | * Return: 0 on success. Non-zero on mailbox error | ||
| 36 | */ | ||
| 37 | static inline int intel_pmc_ipc(struct pmc_ipc_cmd *ipc_cmd, struct pmc_ipc_rbuf *rbuf) | ||
| 38 | { | ||
| 39 | struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | ||
| 40 | union acpi_object params[PMC_IPCS_PARAM_COUNT] = { | ||
| 41 | {.type = ACPI_TYPE_INTEGER,}, | ||
| 42 | {.type = ACPI_TYPE_INTEGER,}, | ||
| 43 | {.type = ACPI_TYPE_INTEGER,}, | ||
| 44 | {.type = ACPI_TYPE_INTEGER,}, | ||
| 45 | {.type = ACPI_TYPE_INTEGER,}, | ||
| 46 | {.type = ACPI_TYPE_INTEGER,}, | ||
| 47 | {.type = ACPI_TYPE_INTEGER,}, | ||
| 48 | }; | ||
| 49 | struct acpi_object_list arg_list = { PMC_IPCS_PARAM_COUNT, params }; | ||
| 50 | union acpi_object *obj; | ||
| 51 | int status; | ||
| 52 | |||
| 53 | if (!ipc_cmd || !rbuf) | ||
| 54 | return -EINVAL; | ||
| 55 | |||
| 56 | /* | ||
| 57 | * 0: IPC Command | ||
| 58 | * 1: IPC Sub Command | ||
| 59 | * 2: Size | ||
| 60 | * 3-6: Write Buffer for offset | ||
| 61 | */ | ||
| 62 | params[0].integer.value = ipc_cmd->cmd; | ||
| 63 | params[1].integer.value = ipc_cmd->sub_cmd; | ||
| 64 | params[2].integer.value = ipc_cmd->size; | ||
| 65 | params[3].integer.value = ipc_cmd->wbuf[0]; | ||
| 66 | params[4].integer.value = ipc_cmd->wbuf[1]; | ||
| 67 | params[5].integer.value = ipc_cmd->wbuf[2]; | ||
| 68 | params[6].integer.value = ipc_cmd->wbuf[3]; | ||
| 69 | |||
| 70 | status = acpi_evaluate_object(NULL, "\\IPCS", &arg_list, &buffer); | ||
| 71 | if (ACPI_FAILURE(status)) | ||
| 72 | return -ENODEV; | ||
| 73 | |||
| 74 | obj = buffer.pointer; | ||
| 75 | |||
| 76 | if (obj && obj->type == ACPI_TYPE_PACKAGE && | ||
| 77 | obj->package.count == VALID_IPC_RESPONSE) { | ||
| 78 | const union acpi_object *objs = obj->package.elements; | ||
| 79 | |||
| 80 | if ((u8)objs[0].integer.value != 0) | ||
| 81 | return -EINVAL; | ||
| 82 | |||
| 83 | rbuf->buf[0] = objs[1].integer.value; | ||
| 84 | rbuf->buf[1] = objs[2].integer.value; | ||
| 85 | rbuf->buf[2] = objs[3].integer.value; | ||
| 86 | rbuf->buf[3] = objs[4].integer.value; | ||
| 87 | } else { | ||
| 88 | return -EINVAL; | ||
| 89 | } | ||
| 90 | |||
| 91 | return 0; | ||
| 92 | } | ||
| 93 | |||
| 94 | #endif /* INTEL_PMC_IPC_H */ | ||