Pull networking updates from Jakub Kicinski: "Core & protocols: - Continue Netlink conversions to per-namespace RTNL lock (IPv4 routing, routing rules, routing next hops, ARP ioctls) - Continue extending the use of netdev instance locks. As a driver opt-in protect queue operations and (in due course) ethtool operations with the instance lock and not RTNL lock. - Support collecting TCP timestamps (data submitted, sent, acked) in BPF, allowing for transparent (to the application) and lower overhead tracking of TCP RPC performance. - Tweak existing networking Rx zero-copy infra to support zero-copy Rx via io_uring. - Optimize MPTCP performance in single subflow mode by 29%. - Enable GRO on packets which went thru XDP CPU redirect (were queued for processing on a different CPU). Improving TCP stream performance up to 2x. - Improve performance of contended connect() by 200% by searching for an available 4-tuple under RCU rather than a spin lock. Bring an additional 229% improvement by tweaking hash distribution. - Avoid unconditionally touching sk_tsflags on RX, improving performance under UDP flood by as much as 10%. - Avoid skb_clone() dance in ping_rcv() to improve performance under ping flood. - Avoid FIB lookup in netfilter if socket is available, 20% perf win. - Rework network device creation (in-kernel) API to more clearly identify network namespaces and their roles. There are up to 4 namespace roles but we used to have just 2 netns pointer arguments, interpreted differently based on context. - Use sysfs_break_active_protection() instead of trylock to avoid deadlocks between unregistering objects and sysfs access. - Add a new sysctl and sockopt for capping max retransmit timeout in TCP. - Support masking port and DSCP in routing rule matches. - Support dumping IPv4 multicast addresses with RTM_GETMULTICAST. - Support specifying at what time packet should be sent on AF_XDP sockets. - Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users. - Add Netlink YAML spec for WiFi (nl80211) and conntrack. - Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols which only need to be exported when IPv6 support is built as a module. - Age FDB entries based on Rx not Tx traffic in VxLAN, similar to normal bridging. - Allow users to specify source port range for GENEVE tunnels. - netconsole: allow attaching kernel release, CPU ID and task name to messages as metadata Driver API: - Continue rework / fixing of Energy Efficient Ethernet (EEE) across the SW layers. Delegate the responsibilities to phylink where possible. Improve its handling in phylib. - Support symmetric OR-XOR RSS hashing algorithm. - Support tracking and preserving IRQ affinity by NAPI itself. - Support loopback mode speed selection for interface selftests. Device drivers: - Remove the IBM LCS driver for s390 - Remove the sb1000 cable modem driver - Add support for SFP module access over SMBus - Add MCTP transport driver for MCTP-over-USB - Enable XDP metadata support in multiple drivers - Ethernet high-speed NICs: - Broadcom (bnxt): - add PCIe TLP Processing Hints (TPH) support for new AMD platforms - support dumping RoCE queue state for debug - opt into instance locking - Intel (100G, ice, idpf): - ice: rework MSI-X IRQ management and distribution - ice: support for E830 devices - iavf: add support for Rx timestamping - iavf: opt into instance locking - nVidia/Mellanox: - mlx4: use page pool memory allocator for Rx - mlx5: support for one PTP device per hardware clock - mlx5: support for 200Gbps per-lane link modes - mlx5: move IPSec policy check after decryption - AMD/Solarflare: - support FW flashing via devlink - Cisco (enic): - use page pool memory allocator for Rx - enable 32, 64 byte CQEs - get max rx/tx ring size from the device - Meta (fbnic): - support flow steering and RSS configuration - report queue stats - support TCP segmentation - support IRQ coalescing - support ring size configuration - Marvell/Cavium: - support AF_XDP - Wangxun: - support for PTP clock and timestamping - Huawei (hibmcge): - checksum offload - add more statistics - Ethernet virtual: - VirtIO net: - aggressively suppress Tx completions, improve perf by 96% with 1 CPU and 55% with 2 CPUs - expose NAPI to IRQ mapping and persist NAPI settings - Google (gve): - support XDP in DQO RDA Queue Format - opt into instance locking - Microsoft vNIC: - support BIG TCP - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - cleanup Tx and Tx clock setting and other link-focused cleanups - enable SGMII and 2500BASEX mode switching for Intel platforms - support Sophgo SG2044 - Broadcom switches (b53): - support for BCM53101 - TI: - iep: add perout configuration support - icssg: support XDP - Cadence (macb): - implement BQL - Xilinx (axinet): - support dynamic IRQ moderation and changing coalescing at runtime - implement BQL - report standard stats - MediaTek: - support phylink managed EEE - Intel: - igc: don't restart the interface on every XDP program change - RealTek (r8169): - support reading registers of internal PHYs directly - increase max jumbo packet size on RTL8125/RTL8126 - Airoha: - support for RISC-V NPU packet processing unit - enable scatter-gather and support MTU up to 9kB - Tehuti (tn40xx): - support cards with TN4010 MAC and an Aquantia AQR105 PHY - Ethernet PHYs: - support for TJA1102S, TJA1121 - dp83tg720: add randomized polling intervals for link detection - dp83822: support changing the transmit amplitude voltage - support for LEDs on 88q2xxx - CAN: - canxl: support Remote Request Substitution bit access - flexcan: add S32G2/S32G3 SoC - WiFi: - remove cooked monitor support - strict mode for better AP testing - basic EPCS support - OMI RX bandwidth reduction support - batman-adv: add support for jumbo frames - WiFi drivers: - RealTek (rtw88): - support RTL8814AE and RTL8814AU - RealTek (rtw89): - switch using wiphy_lock and wiphy_work - add BB context to manipulate two PHY as preparation of MLO - improve BT-coexistence mechanism to play A2DP smoothly - Intel (iwlwifi): - add new iwlmld sub-driver for latest HW/FW combinations - MediaTek (mt76): - preparation for mt7996 Multi-Link Operation (MLO) support - Qualcomm/Atheros (ath12k): - continued work on MLO - Silabs (wfx): - Wake-on-WLAN support - Bluetooth: - add support for skb TX SND/COMPLETION timestamping - hci_core: enable buffer flow control for SCO/eSCO - coredump: log devcd dumps into the monitor - Bluetooth drivers: - intel: add support to configure TX power - nxp: handle bootloader error during cmd5 and cmd7" * tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits) unix: fix up for "apparmor: add fine grained af_unix mediation" mctp: Fix incorrect tx flow invalidation condition in mctp-i2c net: usb: asix: ax88772: Increase phy_name size net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string net: libwx: fix Tx L4 checksum net: libwx: fix Tx descriptor content for some tunnel packets atm: Fix NULL pointer dereference net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus net: phy: aquantia: add essential functions to aqr105 driver net: phy: aquantia: search for firmware-name in fwnode net: phy: aquantia: add probe function to aqr105 for firmware loading net: phy: Add swnode support to mdiobus_scan gve: add XDP DROP and PASS support for DQ gve: update XDP allocation path support RX buffer posting gve: merge packet buffer size fields gve: update GQ RX to use buf_size gve: introduce config-based allocation for XDP gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics ...
Showing the changes to include/linux/platform_data (1 of 1522 files). Show all
Unified · Split
| @@ -0,0 +1,94 @@ | ||
| 1 | +/* SPDX-License-Identifier: GPL-2.0 */ | |
| 2 | +/* | |
| 3 | + * Intel Core SoC Power Management Controller Header File | |
| 4 | + * | |
| 5 | + * Copyright (c) 2025, Intel Corporation. | |
| 6 | + * All Rights Reserved. | |
| 7 | + * | |
| 8 | + */ | |
| 9 | +#ifndef INTEL_PMC_IPC_H | |
| 10 | +#define INTEL_PMC_IPC_H | |
| 11 | +#include <linux/acpi.h> | |
| 12 | + | |
| 13 | +#define IPC_SOC_REGISTER_ACCESS 0xAA | |
| 14 | +#define IPC_SOC_SUB_CMD_READ 0x00 | |
| 15 | +#define IPC_SOC_SUB_CMD_WRITE 0x01 | |
| 16 | +#define PMC_IPCS_PARAM_COUNT 7 | |
| 17 | +#define VALID_IPC_RESPONSE 5 | |
| 18 | + | |
| 19 | +struct pmc_ipc_cmd { | |
| 20 | + u32 cmd; | |
| 21 | + u32 sub_cmd; | |
| 22 | + u32 size; | |
| 23 | + u32 wbuf[4]; | |
| 24 | +}; | |
| 25 | + | |
| 26 | +struct pmc_ipc_rbuf { | |
| 27 | + u32 buf[4]; | |
| 28 | +}; | |
| 29 | + | |
| 30 | +/** | |
| 31 | + * intel_pmc_ipc() - PMC IPC Mailbox accessor | |
| 32 | + * @ipc_cmd: Prepared input command to send | |
| 33 | + * @rbuf: Allocated array for returned IPC data | |
| 34 | + * | |
| 35 | + * Return: 0 on success. Non-zero on mailbox error | |
| 36 | + */ | |
| 37 | +static inline int intel_pmc_ipc(struct pmc_ipc_cmd *ipc_cmd, struct pmc_ipc_rbuf *rbuf) | |
| 38 | +{ | |
| 39 | + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | |
| 40 | + union acpi_object params[PMC_IPCS_PARAM_COUNT] = { | |
| 41 | + {.type = ACPI_TYPE_INTEGER,}, | |
| 42 | + {.type = ACPI_TYPE_INTEGER,}, | |
| 43 | + {.type = ACPI_TYPE_INTEGER,}, | |
| 44 | + {.type = ACPI_TYPE_INTEGER,}, | |
| 45 | + {.type = ACPI_TYPE_INTEGER,}, | |
| 46 | + {.type = ACPI_TYPE_INTEGER,}, | |
| 47 | + {.type = ACPI_TYPE_INTEGER,}, | |
| 48 | + }; | |
| 49 | + struct acpi_object_list arg_list = { PMC_IPCS_PARAM_COUNT, params }; | |
| 50 | + union acpi_object *obj; | |
| 51 | + int status; | |
| 52 | + | |
| 53 | + if (!ipc_cmd || !rbuf) | |
| 54 | + return -EINVAL; | |
| 55 | + | |
| 56 | + /* | |
| 57 | + * 0: IPC Command | |
| 58 | + * 1: IPC Sub Command | |
| 59 | + * 2: Size | |
| 60 | + * 3-6: Write Buffer for offset | |
| 61 | + */ | |
| 62 | + params[0].integer.value = ipc_cmd->cmd; | |
| 63 | + params[1].integer.value = ipc_cmd->sub_cmd; | |
| 64 | + params[2].integer.value = ipc_cmd->size; | |
| 65 | + params[3].integer.value = ipc_cmd->wbuf[0]; | |
| 66 | + params[4].integer.value = ipc_cmd->wbuf[1]; | |
| 67 | + params[5].integer.value = ipc_cmd->wbuf[2]; | |
| 68 | + params[6].integer.value = ipc_cmd->wbuf[3]; | |
| 69 | + | |
| 70 | + status = acpi_evaluate_object(NULL, "\\IPCS", &arg_list, &buffer); | |
| 71 | + if (ACPI_FAILURE(status)) | |
| 72 | + return -ENODEV; | |
| 73 | + | |
| 74 | + obj = buffer.pointer; | |
| 75 | + | |
| 76 | + if (obj && obj->type == ACPI_TYPE_PACKAGE && | |
| 77 | + obj->package.count == VALID_IPC_RESPONSE) { | |
| 78 | + const union acpi_object *objs = obj->package.elements; | |
| 79 | + | |
| 80 | + if ((u8)objs[0].integer.value != 0) | |
| 81 | + return -EINVAL; | |
| 82 | + | |
| 83 | + rbuf->buf[0] = objs[1].integer.value; | |
| 84 | + rbuf->buf[1] = objs[2].integer.value; | |
| 85 | + rbuf->buf[2] = objs[3].integer.value; | |
| 86 | + rbuf->buf[3] = objs[4].integer.value; | |
| 87 | + } else { | |
| 88 | + return -EINVAL; | |
| 89 | + } | |
| 90 | + | |
| 91 | + return 0; | |
| 92 | +} | |
| 93 | + | |
| 94 | +#endif /* INTEL_PMC_IPC_H */ | |