The configuration of the OCTEONTX XCV_DLL_CTL register via xcv_init_hw() is such that the RGMII RX delay is bypassed leaving the RGMII TX delay enabled in the MAC: /* Configure DLL - enable or bypass * TX no bypass, RX bypass */ cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL); cfg &= ~0xFF03; cfg |= CLKRX_BYP; writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL); This would coorespond to a interface type of PHY_INTERFACE_MODE_RGMII_RXID and not PHY_INTERFACE_MODE_RGMII. Fixing this allows RGMII PHY drivers to do the right thing (enable RX delay in the PHY) instead of erroneously enabling both delays in the PHY.
Unified · Split
| @@ -1039,7 +1039,7 @@ static int phy_interface_mode(u8 lmac_type) · 1038 unmodified lines | |||
| 1039 | if (lmac_type == BGX_MODE_QSGMII) | 1039 | if (lmac_type == BGX_MODE_QSGMII) |
| 1040 | return PHY_INTERFACE_MODE_QSGMII; | 1040 | return PHY_INTERFACE_MODE_QSGMII; |
| 1041 | if (lmac_type == BGX_MODE_RGMII) | 1041 | if (lmac_type == BGX_MODE_RGMII) |
| 1042 | return PHY_INTERFACE_MODE_RGMII; | 1042 | return PHY_INTERFACE_MODE_RGMII_RXID; |
| 1043 | 1043 | ||
| 1044 | return PHY_INTERFACE_MODE_SGMII; | 1044 | return PHY_INTERFACE_MODE_SGMII; |
| 1045 | } | 1045 | } |