Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull trivial tree from Jiri Kosina: "The usual trivial updates all over the tree -- mostly typo fixes and documentation updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits) doc: Documentation/cputopology.txt fix typo treewide: Convert retrun typos to return Fix comment typo for init_cma_reserved_pageblock Documentation/trace: Correcting and extending tracepoint documentation mm/hotplug: fix a typo in Documentation/memory-hotplug.txt power: Documentation: Update s2ram link doc: fix a typo in Documentation/00-INDEX Documentation/printk-formats.txt: No casts needed for u64/s64 doc: Fix typo "is is" in Documentations treewide: Fix printks with 0x%# zram: doc fixes Documentation/kmemcheck: update kmemcheck documentation doc: documentation/hwspinlock.txt fix typo PM / Hibernate: add section for resume options doc: filesystems : Fix typo in Documentations/filesystems scsi/megaraid fixed several typos in comments ppc: init_32: Fix error typo "CONFIG_START_KERNEL" treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks page_isolation: Fix a comment typo in test_pages_isolated() doc: fix a typo about irq affinity ...

Linus Torvalds committed 13 years ago

Commit 2e515bf2 parents 22e04f6 f8ea61e106 files · +269 −204Browse files

Unified · Split

106 files

CREDITS +5 −6
Documentation/00-INDEX +1 −1
Documentation/ABI/testing/sysfs-block-zram +5 −4
Documentation/DocBook/media/v4l/vidioc-g-parm.xml +2 −2
Documentation/IRQ-affinity.txt +2 −2
Documentation/SubmittingPatches +10 −0
Documentation/acpi/enumeration.txt +1 −1
Documentation/arm/OMAP/omap_pm +1 −1
Documentation/block/cfq-iosched.txt +1 −1
Documentation/cachetlb.txt +3 −3
Documentation/cputopology.txt +1 −1
Documentation/development-process/2.Process +2 −2
Documentation/devicetree/bindings/arm/ste-u300.txt +1 −1
Documentation/devicetree/bindings/arm/vexpress-sysreg.txt +2 −2
Documentation/devicetree/bindings/c6x/dscr.txt +1 −1
Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +1 −1
Documentation/devicetree/bindings/clock/st,nomadik.txt +1 −1
Documentation/devicetree/bindings/dma/atmel-dma.txt +2 −2
Documentation/devicetree/bindings/dma/fsl-imx-dma.txt +1 −1
Documentation/devicetree/bindings/dma/ste-dma40.txt +2 −2
Documentation/devicetree/bindings/mfd/cros-ec.txt +1 −1
Documentation/devicetree/bindings/net/can/atmel-can.txt +1 −1
Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +1 −1
Documentation/devicetree/bindings/serial/rs485.txt +1 −1
Documentation/dma-buf-sharing.txt +1 −1
Documentation/early-userspace/README +1 −2
Documentation/fb/fbcon.txt +1 −1
Documentation/fb/viafb.modes +1 −1
Documentation/fb/viafb.txt +1 −1
Documentation/filesystems/btrfs.txt +1 −1
Documentation/filesystems/ext4.txt +1 −1
Documentation/filesystems/nfs/Exporting +1 −1
Documentation/filesystems/nfs/pnfs.txt +1 −1
Documentation/filesystems/qnx6.txt +1 −1
Documentation/filesystems/relay.txt +1 −1
Documentation/filesystems/sysfs-tagging.txt +1 −1
Documentation/filesystems/xfs.txt +1 −1
Documentation/fmc/carrier.txt +1 −1
Documentation/hwmon/abituguru-datasheet +1 −1
Documentation/hwmon/submitting-patches +1 −1
Documentation/hwspinlock.txt +1 −1
Documentation/i2c/upgrading-clients +2 −2
Documentation/kmemcheck.txt +3 −3
Documentation/leds/leds-lm3556.txt +1 −1
Documentation/leds/leds-lp3944.txt +1 −1
Documentation/memory-hotplug.txt +1 −1
Documentation/mtd/nand_ecc.txt +1 −1
Documentation/power/basic-pm-debugging.txt +5 −5
Documentation/power/swsusp.txt +14 −1
Documentation/printk-formats.txt +3 −3
Documentation/rapidio/rapidio.txt +1 −1
Documentation/scsi/hptiop.txt +1 −1
Documentation/sound/alsa/README.maya44 +1 −1
Documentation/sound/alsa/compress_offload.txt +2 −2
Documentation/sysfs-rules.txt +1 −1
Documentation/target/tcm_mod_builder.py +1 −1
Documentation/trace/ftrace.txt +2 −2
Documentation/trace/tracepoints.txt +17 −2
Documentation/virtual/kvm/api.txt +1 −1
Documentation/x86/boot.txt +1 −1
Documentation/zh_CN/SubmittingPatches +1 −1
arch/parisc/kernel/signal.c +1 −1
arch/powerpc/mm/init_32.c +1 −1
crypto/api.c +1 −1
drivers/block/drbd/drbd_bitmap.c +1 −1
drivers/clocksource/acpi_pm.c +2 −2
drivers/crypto/ux500/hash/hash_core.c +1 −1
drivers/gpu/drm/radeon/r300.c +1 −1
drivers/infiniband/hw/ehca/ipz_pt_fn.c +2 −1
drivers/media/usb/gspca/vicam.c +1 −1
drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c +1 −1
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +1 −1
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +1 −1
drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +1 −1
drivers/net/ethernet/sis/sis900.c +1 −1
drivers/net/wireless/cw1200/wsm.c +1 −1
drivers/net/wireless/iwlwifi/mvm/time-event.c +1 −1
drivers/net/wireless/rtlwifi/rtl8188ee/fw.c +2 −2
drivers/net/wireless/rtlwifi/rtl8192de/dm.c +1 −1
drivers/net/wireless/rtlwifi/rtl8723ae/fw.c +2 −2
drivers/power/88pm860x_charger.c +2 −2
drivers/power/pm2301_charger.c +1 −1
drivers/scsi/bfa/bfad_im.c +1 −1
drivers/scsi/cxgbi/libcxgbi.h +4 −4
drivers/scsi/hpsa.c +1 −1
drivers/scsi/lpfc/lpfc_attr.c +4 −4
drivers/scsi/lpfc/lpfc_bsg.c +1 −1
drivers/scsi/megaraid/megaraid_mbox.c +5 −5
drivers/scsi/megaraid/megaraid_mm.c +1 −1
drivers/scsi/megaraid/megaraid_sas_fusion.h +1 −1
drivers/scsi/qla2xxx/qla_bsg.c +1 −1
drivers/scsi/qla2xxx/qla_mr.c +1 −1
drivers/spi/spi-bitbang.c +1 −1
drivers/tty/serial/kgdboc.c +1 −1
fs/btrfs/send.c +1 −1
fs/ext4/super.c +2 −2
fs/gfs2/dir.c +1 −1
include/linux/coda.h +0 −1
include/linux/ktime.h +15 −13
kernel/workqueue.c +66 −41
mm/memory-failure.c +1 −1
mm/page_alloc.c +1 −1
mm/page_isolation.c +4 −4
net/sched/sch_choke.c +2 −1
sound/pci/ens1370.c +1 −1
sound/pci/via82xx.c +1 −1

CREDITS+5−6

@@ -637,14 +637,13 @@ S: 14509 NE 39th Street #1096 · 636 unmodified lines
637	637	S: Bellevue, Washington 98007
638	638	S: USA
639	639
640		−N: Christopher L. Cheney
641		−E: ccheney@debian.org
642		−E: ccheney@cheney.cx
643		−W: http://www.cheney.cx
	640	+N: Chris Cheney
	641	+E: chris.cheney@gmail.com
	642	+E: ccheney@redhat.com
644	643	P: 1024D/8E384AF2 2D31 1927 87D7 1F24 9FF9 1BC5 D106 5AB3 8E38 4AF2
645	644	D: Vista Imaging usb webcam driver
646		−S: 314 Prince of Wales
647		−S: Conroe, TX 77304
	645	+S: 2308 Therrell Way
	646	+S: McKinney, TX 75070
648	647	S: USA
649	648
650	649	N: Stuart Cheshire

Documentation/00-INDEX+1−1

@@ -40,7 +40,7 @@ IPMI.txt · 39 unmodified lines
40	40	IRQ-affinity.txt
41	41	- how to select which CPU(s) handle which interrupt events on SMP.
42	42	IRQ-domain.txt
43		− - info on inerrupt numbering and setting up IRQ domains.
	43	+ - info on interrupt numbering and setting up IRQ domains.
44	44	IRQ.txt
45	45	- description of what an IRQ is.
46	46	Intel-IOMMU.txt

Documentation/ABI/testing/sysfs-block-zram+5−4

@@ -5,20 +5,21 @@ Description: · 4 unmodified lines
5	5	The disksize file is read-write and specifies the disk size
6	6	which represents the limit on the uncompressed worth of data
7	7	that can be stored in this disk.
	8	+ Unit: bytes
8	9
9	10	What: /sys/block/zram<id>/initstate
10	11	Date: August 2010
11	12	Contact: Nitin Gupta <ngupta@vflare.org>
12	13	Description:
13		− The disksize file is read-only and shows the initialization
	14	+ The initstate file is read-only and shows the initialization
14	15	state of the device.
15	16
16	17	What: /sys/block/zram<id>/reset
17	18	Date: August 2010
18	19	Contact: Nitin Gupta <ngupta@vflare.org>
19	20	Description:
20		− The disksize file is write-only and allows resetting the
21		− device. The reset operation frees all the memory assocaited
	21	+ The reset file is write-only and allows resetting the
	22	+ device. The reset operation frees all the memory associated
22	23	with this device.
23	24
24	25	What: /sys/block/zram<id>/num_reads
@@ -48,7 +49,7 @@ Contact: Nitin Gupta <ngupta@vflare.org> · 23 unmodified lines
48	49	Description:
49	50	The notify_free file is read-only and specifies the number of
50	51	swap slot free notifications received by this device. These
51		− notifications are send to a swap block device when a swap slot
	52	+ notifications are sent to a swap block device when a swap slot
52	53	is freed. This statistic is applicable only when this disk is
53	54	being used as a swap disk.
54	55

Documentation/DocBook/media/v4l/vidioc-g-parm.xml+2−2

@@ -132,7 +132,7 @@ devices.</para> · 131 unmodified lines
132	132	<row>
133	133	<entry>&v4l2-fract;</entry>
134	134	<entry><structfield>timeperframe</structfield></entry>
135		− <entry><para>This is is the desired period between
	135	+ <entry><para>This is the desired period between
136	136	successive frames captured by the driver, in seconds. The
137	137	field is intended to skip frames on the driver side, saving I/O
138	138	bandwidth.</para><para>Applications store here the desired frame
@@ -193,7 +193,7 @@ applications must set the array to zero.</entry> · 54 unmodified lines
193	193	<row>
194	194	<entry>&v4l2-fract;</entry>
195	195	<entry><structfield>timeperframe</structfield></entry>
196		− <entry>This is is the desired period between
	196	+ <entry>This is the desired period between
197	197	successive frames output by the driver, in seconds.</entry>
198	198	</row>
199	199	<row>

Documentation/IRQ-affinity.txt+2−2

@@ -57,8 +57,8 @@ i.e counters for the CPU0-3 did not change. · 56 unmodified lines
57	57
58	58	Here is an example of limiting that same irq (44) to cpus 1024 to 1031:
59	59
60		−[root@moon 44]# echo 1024-1031 > smp_affinity
61		−[root@moon 44]# cat smp_affinity
	60	+[root@moon 44]# echo 1024-1031 > smp_affinity_list
	61	+[root@moon 44]# cat smp_affinity_list
62	62	1024-1031
63	63
64	64	Note that to do this with a bitmask would require 32 bitmasks of zero

Documentation/SubmittingPatches+10−0

@@ -109,6 +109,16 @@ probably didn't even receive earlier versions of the patch. · 108 unmodified lines
109	109	If the patch fixes a logged bug entry, refer to that bug entry by
110	110	number and URL.
111	111
	112	+If you want to refer to a specific commit, don't just refer to the
	113	+SHA-1 ID of the commit. Please also include the oneline summary of
	114	+the commit, to make it easier for reviewers to know what it is about.
	115	+Example:
	116	+
	117	+ Commit e21d2170f36602ae2708 ("video: remove unnecessary
	118	+ platform_set_drvdata()") removed the unnecessary
	119	+ platform_set_drvdata(), but left the variable "dev" unused,
	120	+ delete it.
	121	+
112	122
113	123	3) Separate your changes.
114	124

Documentation/acpi/enumeration.txt+1−1

@@ -207,7 +207,7 @@ passing those. One idea is to return this in _DSM method like: · 206 unmodified lines
207	207	Return (Local0)
208	208	}
209	209
210		−Then the at25 SPI driver can get this configation by calling _DSM on its
	210	+Then the at25 SPI driver can get this configuration by calling _DSM on its
211	211	ACPI handle like:
212	212
213	213	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };

Documentation/arm/OMAP/omap_pm+1−1

@@ -78,7 +78,7 @@ to NULL. Drivers should use the following idiom: · 77 unmodified lines
78	78	The most common usage of these functions will probably be to specify
79	79	the maximum time from when an interrupt occurs, to when the device
80	80	becomes accessible. To accomplish this, driver writers should use the
81		−set_max_mpu_wakeup_lat() function to to constrain the MPU wakeup
	81	+set_max_mpu_wakeup_lat() function to constrain the MPU wakeup
82	82	latency, and the set_max_dev_wakeup_lat() function to constrain the
83	83	device wakeup latency (from clk_enable() to accessibility). For
84	84	example,

Documentation/block/cfq-iosched.txt+1−1

@@ -69,7 +69,7 @@ one, this value should be decreased relative to fifo_expire_async. · 68 unmodified lines
69	69	group_idle
70	70	-----------
71	71	This parameter forces idling at the CFQ group level instead of CFQ
72		−queue level. This was introduced after after a bottleneck was observed
	72	+queue level. This was introduced after a bottleneck was observed
73	73	in higher end storage due to idle on sequential queue and allow dispatch
74	74	from a single queue. The idea with this parameter is that it can be run with
75	75	slice_idle=0 and group_idle=8, so that idling does not happen on individual

Documentation/cachetlb.txt+3−3

@@ -57,7 +57,7 @@ changes occur: · 56 unmodified lines
57	57	interface must make sure that any previous page table
58	58	modifications for the address space 'vma->vm_mm' in the range
59	59	'start' to 'end-1' will be visible to the cpu. That is, after
60		− running, here will be no entries in the TLB for 'mm' for
	60	+ running, there will be no entries in the TLB for 'mm' for
61	61	virtual addresses in the range 'start' to 'end-1'.
62	62
63	63	The "vma" is the backing store being used for the region.
@@ -375,8 +375,8 @@ maps this page at its virtual address. · 311 unmodified lines
375	375
376	376	void flush_icache_page(struct vm_area_struct vma, struct page page)
377	377	All the functionality of flush_icache_page can be implemented in
378		− flush_dcache_page and update_mmu_cache. In 2.7 the hope is to
379		− remove this interface completely.
	378	+ flush_dcache_page and update_mmu_cache. In the future, the hope
	379	+ is to remove this interface completely.
380	380
381	381	The final category of APIs is for I/O to deliberately aliased address
382	382	ranges inside the kernel. Such aliases are set up by use of the

Documentation/cputopology.txt+1−1

@@ -22,7 +22,7 @@ to /proc/cpuinfo. · 21 unmodified lines
22	22
23	23	4) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
24	24
25		− internel kernel map of cpuX's hardware threads within the same
	25	+ internal kernel map of cpuX's hardware threads within the same
26	26	core as cpuX
27	27
28	28	5) /sys/devices/system/cpu/cpuX/topology/core_siblings:

Documentation/development-process/2.Process+2−2

@@ -276,7 +276,7 @@ mainline get there via -mm. · 275 unmodified lines
276	276	The current -mm patch is available in the "mmotm" (-mm of the moment)
277	277	directory at:
278	278
279		− http://userweb.kernel.org/~akpm/mmotm/
	279	+ http://www.ozlabs.org/~akpm/mmotm/
280	280
281	281	Use of the MMOTM tree is likely to be a frustrating experience, though;
282	282	there is a definite chance that it will not even compile.
@@ -287,7 +287,7 @@ the mainline is expected to look like after the next merge window closes. · 4 unmodified lines
287	287	Linux-next trees are announced on the linux-kernel and linux-next mailing
288	288	lists when they are assembled; they can be downloaded from:
289	289
290		− http://www.kernel.org/pub/linux/kernel/people/sfr/linux-next/
	290	+ http://www.kernel.org/pub/linux/kernel/next/
291	291
292	292	Some information about linux-next has been gathered at:
293	293

Documentation/devicetree/bindings/arm/ste-u300.txt+1−1

@@ -22,7 +22,7 @@ This contains the board-specific information. · 21 unmodified lines
22	22	- compatible: must be "stericsson,s365".
23	23	- vana15-supply: the regulator supplying the 1.5V to drive the
24	24	board.
25		−- syscon: a pointer to the syscon node so we can acccess the
	25	+- syscon: a pointer to the syscon node so we can access the
26	26	syscon registers to set the board as self-powered.
27	27
28	28	Example:

Documentation/devicetree/bindings/arm/vexpress-sysreg.txt+2−2

@@ -32,8 +32,8 @@ numbers - see motherboard's TRM for more details. · 31 unmodified lines
32	32	The node describing a config device must refer to the sysreg node via
33	33	"arm,vexpress,config-bridge" phandle (can be also defined in the node's
34	34	parent) and relies on the board topology properties - see main vexpress
35		−node documentation for more details. It must must also define the
36		−following property:
	35	+node documentation for more details. It must also define the following
	36	+property:
37	37	- arm,vexpress-sysreg,func : must contain two cells:
38	38	- first cell defines function number (eg. 1 for clock generator,
39	39	2 for voltage regulators etc.)

Documentation/devicetree/bindings/c6x/dscr.txt+1−1

@@ -5,7 +5,7 @@ TI C6X SoCs contain a region of miscellaneous registers which provide various · 4 unmodified lines
5	5	function for SoC control or status. Details vary considerably among from SoC
6	6	to SoC with no two being alike.
7	7
8		−In general, the Device State Configuraion Registers (DSCR) will provide one or
	8	+In general, the Device State Configuration Registers (DSCR) will provide one or
9	9	more configuration registers often protected by a lock register where one or
10	10	more key values must be written to a lock register in order to unlock the
11	11	configuration register for writes. These configuration register may be used to

Documentation/devicetree/bindings/clock/clk-exynos-audss.txt+1−1

@@ -2,7 +2,7 @@ · 1 unmodified line
2	2
3	3	The Samsung Audio Subsystem clock controller generates and supplies clocks
4	4	to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock
5		−binding described here is applicable to all SoC's in Exynos family.
	5	+binding described here is applicable to all SoCs in Exynos family.
6	6
7	7	Required Properties:
8	8

Documentation/devicetree/bindings/clock/st,nomadik.txt+1−1

@@ -17,7 +17,7 @@ Optional properties for the SRC node: · 16 unmodified lines
17	17	- disable-mxtal: if present this will disable the MXTALO,
18	18	i.e. the driver output for the main (~19.2 MHz) chrystal,
19	19	if the board has its own circuitry for providing this
20		− osciallator
	20	+ oscillator
21	21
22	22
23	23	PLL nodes: these nodes represent the two PLLs on the system,

Documentation/devicetree/bindings/dma/atmel-dma.txt+2−2

@@ -18,14 +18,14 @@ dma0: dma@ffffec00 { · 17 unmodified lines
18	18
19	19	DMA clients connected to the Atmel DMA controller must use the format
20	20	described in the dma.txt file, using a three-cell specifier for each channel:
21		−a phandle plus two interger cells.
	21	+a phandle plus two integer cells.
22	22	The three cells in order are:
23	23
24	24	1. A phandle pointing to the DMA controller.
25	25	2. The memory interface (16 most significant bits), the peripheral interface
26	26	(16 less significant bits).
27	27	3. Parameters for the at91 DMA configuration register which are device
28		−dependant:
	28	+dependent:
29	29	- bit 7-0: peripheral identifier for the hardware handshaking interface. The
30	30	identifier can be different for tx and rx.
31	31	- bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP.

Documentation/devicetree/bindings/dma/fsl-imx-dma.txt+1−1

@@ -34,7 +34,7 @@ Clients have to specify the DMA requests with phandles in a list. · 33 unmodified lines
34	34	Required properties:
35	35	- dmas: List of one or more DMA request specifiers. One DMA request specifier
36	36	consists of a phandle to the DMA controller followed by the integer
37		− specifiying the request line.
	37	+ specifying the request line.
38	38	- dma-names: List of string identifiers for the DMA requests. For the correct
39	39	names, have a look at the specific client driver.
40	40

Documentation/devicetree/bindings/dma/ste-dma40.txt+2−2

@@ -37,14 +37,14 @@ Each dmas request consists of 4 cells: · 36 unmodified lines
37	37	1. A phandle pointing to the DMA controller
38	38	2. Device Type
39	39	3. The DMA request line number (only when 'use fixed channel' is set)
40		− 4. A 32bit mask specifying; mode, direction and endianess [NB: This list will grow]
	40	+ 4. A 32bit mask specifying; mode, direction and endianness [NB: This list will grow]
41	41	0x00000001: Mode:
42	42	Logical channel when unset
43	43	Physical channel when set
44	44	0x00000002: Direction:
45	45	Memory to Device when unset
46	46	Device to Memory when set
47		− 0x00000004: Endianess:
	47	+ 0x00000004: Endianness:
48	48	Little endian when unset
49	49	Big endian when set
50	50	0x00000008: Use fixed channel:

Documentation/devicetree/bindings/mfd/cros-ec.txt+1−1

@@ -4,7 +4,7 @@ Google's ChromeOS EC is a Cortex-M device which talks to the AP and · 3 unmodified lines
4	4	implements various function such as keyboard and battery charging.
5	5
6	6	The EC can be connect through various means (I2C, SPI, LPC) and the
7		−compatible string used depends on the inteface. Each connection method has
	7	+compatible string used depends on the interface. Each connection method has
8	8	its own driver which connects to the top level interface-agnostic EC driver.
9	9	Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to
10	10	the top-level driver.

Documentation/devicetree/bindings/net/can/atmel-can.txt+1−1

@@ -8,7 +8,7 @@ Required properties: · 7 unmodified lines
8	8	Example:
9	9
10	10	can0: can@f000c000 {
11		− compatbile = "atmel,at91sam9x5-can";
	11	+ compatible = "atmel,at91sam9x5-can";
12	12	reg = <0xf000c000 0x300>;
13	13	interrupts = <40 4 5>
14	14	};

Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt+1−1

@@ -37,7 +37,7 @@ Bank: 3 (A, B and C) · 36 unmodified lines
37	37	0xffffffff 0x7fff3ccf /* pioB */
38	38	0xffffffff 0x007fffff /* pioC */
39	39
40		−For each peripheral/bank we will descibe in a u32 if a pin can can be
	40	+For each peripheral/bank we will descibe in a u32 if a pin can be
41	41	configured in it by putting 1 to the pin bit (1 << pin)
42	42
43	43	Let's take the pioA on peripheral B

Documentation/devicetree/bindings/serial/rs485.txt+1−1

@@ -7,7 +7,7 @@ UART node. · 6 unmodified lines
7	7
8	8	Required properties:
9	9	- rs485-rts-delay: prop-encoded-array <a b> where:
10		− * a is the delay beteween rts signal and beginning of data sent in milliseconds.
	10	+ * a is the delay between rts signal and beginning of data sent in milliseconds.
11	11	it corresponds to the delay before sending data.
12	12	* b is the delay between end of data sent and rts signal in milliseconds
13	13	it corresponds to the delay after sending data and actual release of the line.

Documentation/dma-buf-sharing.txt+1−1

@@ -321,7 +321,7 @@ Access to a dma_buf from the kernel context involves three steps: · 320 unmodified lines
321	321
322	322	When the importer is done accessing the range specified in begin_cpu_access,
323	323	it needs to announce this to the exporter (to facilitate cache flushing and
324		− unpinning of any pinned resources). The result of of any dma_buf kmap calls
	324	+ unpinning of any pinned resources). The result of any dma_buf kmap calls
325	325	after end_cpu_access is undefined.
326	326
327	327	Interface:

Documentation/early-userspace/README+1−2

@@ -83,8 +83,7 @@ Where's this all leading? · 82 unmodified lines
83	83
84	84	The klibc distribution contains some of the necessary software to make
85	85	early userspace useful. The klibc distribution is currently
86		−maintained separately from the kernel, but this may change early in
87		−the 2.7 era (it missed the boat for 2.5).
	86	+maintained separately from the kernel.
88	87
89	88	You can obtain somewhat infrequent snapshots of klibc from
90	89	ftp://ftp.kernel.org/pub/linux/libs/klibc/

Documentation/fb/fbcon.txt+1−1

@@ -150,7 +150,7 @@ C. Boot options · 149 unmodified lines
150	150
151	151	C. Attaching, Detaching and Unloading
152	152
153		−Before going on on how to attach, detach and unload the framebuffer console, an
	153	+Before going on how to attach, detach and unload the framebuffer console, an
154	154	illustration of the dependencies may help.
155	155
156	156	The console layer, as with most subsystems, needs a driver that interfaces with

Documentation/fb/viafb.modes+1−1

@@ -571,7 +571,7 @@ mode "640x480-60" · 570 unmodified lines
571	571	# 160 chars 800 lines
572	572	# Blank Time 4.798 us 0.564 ms
573	573	# 50 chars 28 lines
574		−# Polarity negtive positive
	574	+# Polarity negative positive
575	575	#
576	576	mode "1280x800-60"
577	577	# D: 83.500 MHz, H: 49.702 kHz, V: 60.00 Hz

Documentation/fb/viafb.txt+1−1

@@ -32,7 +32,7 @@ · 31 unmodified lines
32	32	Start viafb with default settings:
33	33	#modprobe viafb
34	34
35		− Start viafb with with user options:
	35	+ Start viafb with user options:
36	36	#modprobe viafb viafb_mode=800x600 viafb_bpp=16 viafb_refresh=60
37	37	viafb_active_dev=CRT+DVI viafb_dvi_port=DVP1
38	38	viafb_mode1=1024x768 viafb_bpp=16 viafb_refresh1=60

Documentation/filesystems/btrfs.txt+1−1

@@ -87,7 +87,7 @@ Unless otherwise specified, all options default to off. · 86 unmodified lines
87	87
88	88	device=<devicepath>
89	89	Specify a device during mount so that ioctls on the control device
90		− can be avoided. Especialy useful when trying to mount a multi-device
	90	+ can be avoided. Especially useful when trying to mount a multi-device
91	91	setup as root. May be specified multiple times for multiple devices.
92	92
93	93	discard

Documentation/filesystems/ext4.txt+1−1

@@ -2,7 +2,7 @@ · 1 unmodified line
2	2	Ext4 Filesystem
3	3	===============
4	4
5		−Ext4 is an an advanced level of the ext3 filesystem which incorporates
	5	+Ext4 is an advanced level of the ext3 filesystem which incorporates
6	6	scalability and reliability enhancements for supporting large filesystems
7	7	(64 bit) in keeping with increasing disk capacities and state-of-the-art
8	8	feature requirements.

Documentation/filesystems/nfs/Exporting+1−1

@@ -93,7 +93,7 @@ For a filesystem to be exportable it must: · 92 unmodified lines
93	93	2/ make sure that d_splice_alias is used rather than d_add
94	94	when ->lookup finds an inode for a given parent and name.
95	95
96		− If inode is NULL, d_splice_alias(inode, dentry) is eqivalent to
	96	+ If inode is NULL, d_splice_alias(inode, dentry) is equivalent to
97	97
98	98	d_add(dentry, inode), NULL
99	99

Documentation/filesystems/nfs/pnfs.txt+1−1

@@ -12,7 +12,7 @@ struct pnfs_layout_hdr · 11 unmodified lines
12	12	----------------------
13	13	The on-the-wire command LAYOUTGET corresponds to struct
14	14	pnfs_layout_segment, usually referred to by the variable name lseg.
15		−Each nfs_inode may hold a pointer to a cache of of these layout
	15	+Each nfs_inode may hold a pointer to a cache of these layout
16	16	segments in nfsi->layout, of type struct pnfs_layout_hdr.
17	17
18	18	We reference the header for the inode pointing to it, across each

Documentation/filesystems/qnx6.txt+1−1

@@ -149,7 +149,7 @@ Bitmap system area · 148 unmodified lines
149	149	------------------
150	150
151	151	The bitmap itself is divided into three parts.
152		−First the system area, that is split into two halfs.
	152	+First the system area, that is split into two halves.
153	153	Then userspace.
154	154
155	155	The requirement for a static, fixed preallocated system area comes from how

Documentation/filesystems/relay.txt+1−1

@@ -31,7 +31,7 @@ Semantics · 30 unmodified lines
31	31
32	32	Each relay channel has one buffer per CPU, each buffer has one or more
33	33	sub-buffers. Messages are written to the first sub-buffer until it is
34		−too full to contain a new message, in which case it it is written to
	34	+too full to contain a new message, in which case it is written to
35	35	the next (if available). Messages are never split across sub-buffers.
36	36	At this point, userspace can be notified so it empties the first
37	37	sub-buffer, while the kernel continues writing to the next.

Documentation/filesystems/sysfs-tagging.txt+1−1

@@ -24,7 +24,7 @@ flag between KOBJ_NS_TYPE_NONE and KOBJ_NS_TYPES, and s_ns will · 23 unmodified lines
24	24	point to the namespace to which it belongs.
25	25
26	26	Each sysfs superblock's sysfs_super_info contains an array void
27		−*ns[KOBJ_NS_TYPES]. When a a task in a tagging namespace
	27	+*ns[KOBJ_NS_TYPES]. When a task in a tagging namespace
28	28	kobj_nstype first mounts sysfs, a new superblock is created. It
29	29	will be differentiated from other sysfs mounts by having its
30	30	s_fs_info->ns[kobj_nstype] set to the new namespace. Note that

Documentation/filesystems/xfs.txt+1−1

@@ -135,7 +135,7 @@ default behaviour. · 134 unmodified lines
135	135	If the memory cost of 8 log buffers is too high on small
136	136	systems, then it may be reduced at some cost to performance
137	137	on metadata intensive workloads. The logbsize option below
138		− controls the size of each buffer and so is also relevent to
	138	+ controls the size of each buffer and so is also relevant to
139	139	this case.
140	140
141	141	logbsize=value

Documentation/fmc/carrier.txt+1−1

@@ -213,7 +213,7 @@ The individual methods perform the following tasks: · 212 unmodified lines
213	213	methods: for example the SPEC driver may define that its carrier
214	214	I2C memory is seen at offset 1M and the internal SPI flash is seen
215	215	at offset 16M. This multiplexing of several flash memories in the
216		− same address space is is carrier-specific and should only be used
	216	+ same address space is carrier-specific and should only be used
217	217	by a driver that has verified the `carrier_name' field.
218	218
219	219

Documentation/hwmon/abituguru-datasheet+1−1

@@ -299,7 +299,7 @@ Byte 1: · 298 unmodified lines
299	299	min threshold (scale as bank 0x26)
300	300
301	301
302		−Warning for the adventerous
	302	+Warning for the adventurous
303	303	===========================
304	304
305	305	A word of caution to those who want to experiment and see if they can figure

Documentation/hwmon/submitting-patches+1−1

@@ -1,7 +1,7 @@
1	1	How to Get Your Patch Accepted Into the Hwmon Subsystem
2	2	-------------------------------------------------------
3	3
4		−This text is is a collection of suggestions for people writing patches or
	4	+This text is a collection of suggestions for people writing patches or
5	5	drivers for the hwmon subsystem. Following these suggestions will greatly
6	6	increase the chances of your change being accepted.
7	7

Documentation/hwspinlock.txt+1−1

@@ -241,7 +241,7 @@ int hwspinlock_example2(void) · 240 unmodified lines
241	241	locks).
242	242	Should be called from a process context (this function might sleep).
243	243	Returns the address of hwspinlock on success, or NULL on error (e.g.
244		− if the hwspinlock is sill in use).
	244	+ if the hwspinlock is still in use).
245	245
246	246	5. Important structs
247	247

Documentation/i2c/upgrading-clients+2−2

@@ -196,8 +196,8 @@ static int example_probe(struct i2c_client *i2c_client, · 195 unmodified lines
196	196
197	197	Update the detach method, by changing the name to _remove and
198	198	to delete the i2c_detach_client call. It is possible that you
199		−can also remove the ret variable as it is not not needed for
200		−any of the core functions.
	199	+can also remove the ret variable as it is not needed for any
	200	+of the core functions.
201	201
202	202	- static int example_detach(struct i2c_client *client)
203	203	+ static int example_remove(struct i2c_client *client)

Documentation/kmemcheck.txt+3−3

@@ -91,9 +91,9 @@ information from the kmemcheck warnings, which is extremely valuable in · 90 unmodified lines
91	91	debugging a problem. This option is not mandatory, however, because it slows
92	92	down the compilation process and produces a much bigger kernel image.
93	93
94		−Now the kmemcheck menu should be visible (under "Kernel hacking" / "kmemcheck:
95		−trap use of uninitialized memory"). Here follows a description of the
96		−kmemcheck configuration variables:
	94	+Now the kmemcheck menu should be visible (under "Kernel hacking" / "Memory
	95	+Debugging" / "kmemcheck: trap use of uninitialized memory"). Here follows
	96	+a description of the kmemcheck configuration variables:
97	97
98	98	o CONFIG_KMEMCHECK
99	99

Documentation/leds/leds-lm3556.txt+1−1

@@ -71,7 +71,7 @@ To register the chip at address 0x63 on specific adapter, set the platform data · 70 unmodified lines
71	71	according to include/linux/platform_data/leds-lm3556.h, set the i2c board info
72	72
73	73	Example:
74		− static struct i2c_board_info __initdata board_i2c_ch4[] = {
	74	+ static struct i2c_board_info board_i2c_ch4[] __initdata = {
75	75	{
76	76	I2C_BOARD_INFO(LM3556_NAME, 0x63),
77	77	.platform_data = &lm3556_pdata,

Documentation/leds/leds-lp3944.txt+1−1

@@ -37,7 +37,7 @@ registered using the i2c_board_info mechanism. · 36 unmodified lines
37	37	To register the chip at address 0x60 on adapter 0, set the platform data
38	38	according to include/linux/leds-lp3944.h, set the i2c board info:
39	39
40		− static struct i2c_board_info __initdata a910_i2c_board_info[] = {
	40	+ static struct i2c_board_info a910_i2c_board_info[] __initdata = {
41	41	{
42	42	I2C_BOARD_INFO("lp3944", 0x60),
43	43	.platform_data = &a910_lp3944_leds,

Documentation/memory-hotplug.txt+1−1

@@ -163,7 +163,7 @@ a recent addition and not present on older kernels. · 162 unmodified lines
163	163	at read: contains online/offline state of memory.
164	164	at write: user can specify "online_kernel",
165	165	"online_movable", "online", "offline" command
166		− which will be performed on al sections in the block.
	166	+ which will be performed on all sections in the block.
167	167	'phys_device' : read-only: designed to show the name of physical memory
168	168	device. This is not well implemented now.
169	169	'removable' : read-only: contains an integer value indicating

Documentation/mtd/nand_ecc.txt+1−1

@@ -543,7 +543,7 @@ THe code within the for loop was changed to: · 542 unmodified lines
543	543	}
544	544
545	545	As you can see tmppar is used to accumulate the parity within a for
546		−iteration. In the last 3 statements is is added to par and, if needed,
	546	+iteration. In the last 3 statements is added to par and, if needed,
547	547	to rp12 and rp14.
548	548
549	549	While making the changes I also found that I could exploit that tmppar

Documentation/power/basic-pm-debugging.txt+5−5

@@ -179,7 +179,7 @@ use the PM_TRACE mechanism documented in Documentation/power/s2ram.txt . · 178 unmodified lines
179	179
180	180	To verify that the STR works, it is generally more convenient to use the s2ram
181	181	tool available from http://suspend.sf.net and documented at
182		−http://en.opensuse.org/SDB:Suspend_to_RAM.
	182	+http://en.opensuse.org/SDB:Suspend_to_RAM (S2RAM_LINK).
183	183
184	184	Namely, after writing "freezer", "devices", "platform", "processors", or "core"
185	185	into /sys/power/pm_test (available if the kernel is compiled with
@@ -194,10 +194,10 @@ Among other things, the testing with the help of /sys/power/pm_test may allow · 8 unmodified lines
194	194	you to identify drivers that fail to suspend or resume their devices. They
195	195	should be unloaded every time before an STR transition.
196	196
197		−Next, you can follow the instructions at http://en.opensuse.org/s2ram to test
198		−the system, but if it does not work "out of the box", you may need to boot it
199		−with "init=/bin/bash" and test s2ram in the minimal configuration. In that
200		−case, you may be able to search for failing drivers by following the procedure
	197	+Next, you can follow the instructions at S2RAM_LINK to test the system, but if
	198	+it does not work "out of the box", you may need to boot it with
	199	+"init=/bin/bash" and test s2ram in the minimal configuration. In that case,
	200	+you may be able to search for failing drivers by following the procedure
201	201	analogous to the one described in section 1. If you find some failing drivers,
202	202	you will have to unload them every time before an STR transition (ie. before
203	203	you run s2ram), and please report the problems with them.

Documentation/power/swsusp.txt+14−1

@@ -50,6 +50,19 @@ echo N > /sys/power/image_size · 49 unmodified lines
50	50
51	51	before suspend (it is limited to 500 MB by default).
52	52
	53	+. The resume process checks for the presence of the resume device,
	54	+if found, it then checks the contents for the hibernation image signature.
	55	+If both are found, it resumes the hibernation image.
	56	+
	57	+. The resume process may be triggered in two ways:
	58	+ 1) During lateinit: If resume=/dev/your_swap_partition is specified on
	59	+ the kernel command line, lateinit runs the resume process. If the
	60	+ resume device has not been probed yet, the resume process fails and
	61	+ bootup continues.
	62	+ 2) Manually from an initrd or initramfs: May be run from
	63	+ the init script by using the /sys/power/resume file. It is vital
	64	+ that this be done prior to remounting any filesystems (even as
	65	+ read-only) otherwise data may be corrupted.
53	66
54	67	Article about goals and implementation of Software Suspend for Linux
55	68	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -326,7 +339,7 @@ Q: How can distributions ship a swsusp-supporting kernel with modular · 270 unmodified lines
326	339	disk drivers (especially SATA)?
327	340
328	341	A: Well, it can be done, load the drivers, then do echo into
329		−/sys/power/disk/resume file from initrd. Be sure not to mount
	342	+/sys/power/resume file from initrd. Be sure not to mount
330	343	anything, not even read-only mount, or you are going to lose your
331	344	data.
332	345

Documentation/printk-formats.txt+3−3

@@ -97,7 +97,7 @@ IPv4 addresses: · 96 unmodified lines
97	97
98	98	%pI4 1.2.3.4
99	99	%pi4 001.002.003.004
100		− %p[Ii][hnbl]
	100	+ %p[Ii]4[hnbl]
101	101
102	102	For printing IPv4 dot-separated decimal addresses. The 'I4' and 'i4'
103	103	specifiers result in a printed address with ('i4') or without ('I4')
@@ -194,11 +194,11 @@ struct va_format: · 90 unmodified lines
194	194
195	195	u64 SHOULD be printed with %llu/%llx, (unsigned long long):
196	196
197		− printk("%llu", (unsigned long long)u64_var);
	197	+ printk("%llu", u64_var);
198	198
199	199	s64 SHOULD be printed with %lld/%llx, (long long):
200	200
201		− printk("%lld", (long long)s64_var);
	201	+ printk("%lld", s64_var);
202	202
203	203	If <type> is dependent on a config option for its size (e.g., sector_t,
204	204	blkcnt_t) or is architecture-dependent for its size (e.g., tcflag_t), use a

Documentation/rapidio/rapidio.txt+1−1

@@ -300,7 +300,7 @@ initialization. · 299 unmodified lines
300	300	-------------------------------------------
301	301
302	302	RapidIO subsystem code organization allows addition of new enumeration/discovery
303		−methods as new configuration options without significant impact to to the core
	303	+methods as new configuration options without significant impact to the core
304	304	RapidIO code.
305	305
306	306	A new enumeration/discovery method has to be attached to one or more mport

Documentation/scsi/hptiop.txt+1−1

@@ -151,7 +151,7 @@ To send a request to the controller: · 150 unmodified lines
151	151	generated.
152	152
153	153	- The host read the outbound list copy pointer shadow register and compare
154		− with previous saved read ponter N. If they are different, the host will
	154	+ with previous saved read pointer N. If they are different, the host will
155	155	read the (N+1)th outbound list unit.
156	156
157	157	The host get the index of the request from the (N+1)th outbound list

Documentation/sound/alsa/README.maya44+1−1

@@ -120,7 +120,7 @@ Mic Phantom+48V: switch for +48V phantom power for electrostatic microphones on · 119 unmodified lines
120	120	Make sure this is not turned on while any other source is connected to input 1/2.
121	121	It might damage the source and/or the maya44 card.
122	122
123		−Mic/Line input: if switch is is on, input jack 1/2 is microphone input (mono), otherwise line input (stereo).
	123	+Mic/Line input: if switch is on, input jack 1/2 is microphone input (mono), otherwise line input (stereo).
124	124
125	125	Bypass: analogue bypass from ADC input to output for channel 1+2. Same as "Monitor" in the windows driver.
126	126	Bypass 1: same for channel 3+4.

Documentation/sound/alsa/compress_offload.txt+2−2

@@ -73,7 +73,7 @@ The main requirements are: · 72 unmodified lines
73	73
74	74	Design
75	75
76		−The new API shares a number of concepts with with the PCM API for flow
	76	+The new API shares a number of concepts with the PCM API for flow
77	77	control. Start, pause, resume, drain and stop commands have the same
78	78	semantics no matter what the content is.
79	79
@@ -130,7 +130,7 @@ the settings should remain the exception. · 50 unmodified lines
130	130	The timestamp becomes a multiple field structure. It lists the number
131	131	of bytes transferred, the number of samples processed and the number
132	132	of samples rendered/grabbed. All these values can be used to determine
133		−the avarage bitrate, figure out if the ring buffer needs to be
	133	+the average bitrate, figure out if the ring buffer needs to be
134	134	refilled or the delay due to decoding/encoding/io on the DSP.
135	135
136	136	Note that the list of codecs/profiles/modes was derived from the

Documentation/sysfs-rules.txt+1−1

@@ -47,7 +47,7 @@ versions of the sysfs interface. · 46 unmodified lines
47	47	at device creation and removal
48	48	- the unique key to the device at that point in time
49	49	- the kernel's path to the device directory without the leading
50		− /sys, and always starting with with a slash
	50	+ /sys, and always starting with a slash
51	51	- all elements of a devpath must be real directories. Symlinks
52	52	pointing to /sys/devices must always be resolved to their real
53	53	target and the target path must be used to access the device.

Documentation/target/tcm_mod_builder.py+1−1

@@ -300,7 +300,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): · 299 unmodified lines
300	300	buf += " int ret;\n\n"
301	301	buf += " if (strstr(name, \"tpgt_\") != name)\n"
302	302	buf += " return ERR_PTR(-EINVAL);\n"
303		− buf += " if (strict_strtoul(name + 5, 10, &tpgt) \|\| tpgt > UINT_MAX)\n"
	303	+ buf += " if (kstrtoul(name + 5, 10, &tpgt) \|\| tpgt > UINT_MAX)\n"
304	304	buf += " return ERR_PTR(-EINVAL);\n\n"
305	305	buf += " tpg = kzalloc(sizeof(struct " + fabric_mod_name + "_tpg), GFP_KERNEL);\n"
306	306	buf += " if (!tpg) {\n"

Documentation/trace/ftrace.txt+2−2

@@ -735,7 +735,7 @@ Here are the available options: · 734 unmodified lines
735	735	function as well as the function being traced.
736	736
737	737	print-parent:
738		− bash-4000 [01] 1477.606694: simple_strtoul <-strict_strtoul
	738	+ bash-4000 [01] 1477.606694: simple_strtoul <-kstrtoul
739	739
740	740	noprint-parent:
741	741	bash-4000 [01] 1477.606694: simple_strtoul
@@ -759,7 +759,7 @@ Here are the available options: · 17 unmodified lines
759	759	latency-format option is enabled.
760	760
761	761	bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \
762		− (+0.000ms): simple_strtoul (strict_strtoul)
	762	+ (+0.000ms): simple_strtoul (kstrtoul)
763	763
764	764	raw - This will display raw numbers. This option is best for
765	765	use with user applications that can translate the raw

Documentation/trace/tracepoints.txt+17−2

@@ -40,7 +40,13 @@ Two elements are required for tracepoints : · 39 unmodified lines
40	40
41	41	In order to use tracepoints, you should include linux/tracepoint.h.
42	42
43		−In include/trace/subsys.h :
	43	+In include/trace/events/subsys.h :
	44	+
	45	+#undef TRACE_SYSTEM
	46	+#define TRACE_SYSTEM subsys
	47	+
	48	+#if !defined(_TRACE_SUBSYS_H) \|\| defined(TRACE_HEADER_MULTI_READ)
	49	+#define _TRACE_SUBSYS_H
44	50
45	51	#include <linux/tracepoint.h>
46	52
@@ -48,10 +54,16 @@ DECLARE_TRACE(subsys_eventname, · 1 unmodified line
48	54	TP_PROTO(int firstarg, struct task_struct *p),
49	55	TP_ARGS(firstarg, p));
50	56
	57	+#endif /* _TRACE_SUBSYS_H */
	58	+
	59	+/* This part must be outside protection */
	60	+#include <trace/define_trace.h>
	61	+
51	62	In subsys/file.c (where the tracing statement must be added) :
52	63
53		−#include <trace/subsys.h>
	64	+#include <trace/events/subsys.h>
54	65
	66	+#define CREATE_TRACE_POINTS
55	67	DEFINE_TRACE(subsys_eventname);
56	68
57	69	void somefct(void)
@@ -72,6 +84,9 @@ Where : · 14 unmodified lines
72	84	- TP_ARGS(firstarg, p) are the parameters names, same as found in the
73	85	prototype.
74	86
	87	+- if you use the header in multiple source files, #define CREATE_TRACE_POINTS
	88	+ should appear only in one source file.
	89	+
75	90	Connecting a function (probe) to a tracepoint is done by providing a
76	91	probe (function to call) for the specific tracepoint through
77	92	register_trace_subsys_eventname(). Removing a probe is done through

Documentation/virtual/kvm/api.txt+1−1

@@ -53,7 +53,7 @@ incompatible change are allowed. However, there is an extension · 52 unmodified lines
53	53	facility that allows backward-compatible extensions to the API to be
54	54	queried and used.
55	55
56		−The extension mechanism is not based on on the Linux version number.
	56	+The extension mechanism is not based on the Linux version number.
57	57	Instead, kvm defines extension identifiers and a facility to query
58	58	whether a particular extension identifier is available. If it is, a
59	59	set of ioctls is available for application use.

Documentation/x86/boot.txt+1−1

@@ -58,7 +58,7 @@ Protocol 2.11: (Kernel 3.6) Added a field for offset of EFI handover · 57 unmodified lines
58	58	protocol entry point.
59	59
60	60	Protocol 2.12: (Kernel 3.8) Added the xloadflags field and extension fields
61		− to struct boot_params for for loading bzImage and ramdisk
	61	+ to struct boot_params for loading bzImage and ramdisk
62	62	above 4G in 64bit.
63	63
64	64	**** MEMORY LAYOUT

Documentation/zh_CN/SubmittingPatches+1−1

@@ -146,7 +146,7 @@ Majordomo lists of VGER.KERNEL.ORG at: · 145 unmodified lines
146	146	<http://vger.kernel.org/vger-lists.html>
147	147
148	148	如果改动影响了用户空间和内核之间的接口，请给 MAN-PAGES 的维护者（列在
149		−MAITAINERS 文件里的）发送一个手册页（man-pages）补丁，或者至少通知一下改
	149	+MAINTAINERS 文件里的）发送一个手册页（man-pages）补丁，或者至少通知一下改
150	150	变，让一些信息有途径进入手册页。
151	151
152	152	即使在第四步的时候，维护者没有作出回应，也要确认在修改他们的代码的时候

arch/parisc/kernel/signal.c+1−1

@@ -78,7 +78,7 @@ restore_sigcontext(struct sigcontext __user sc, struct pt_regs regs) · 77 unmodified lines
78	78	err \|= __copy_from_user(regs->iaoq, sc->sc_iaoq, sizeof(regs->iaoq));
79	79	err \|= __copy_from_user(regs->iasq, sc->sc_iasq, sizeof(regs->iasq));
80	80	err \|= __get_user(regs->sar, &sc->sc_sar);
81		− DBG(2,"restore_sigcontext: iaoq is 0x%#lx / 0x%#lx\n",
	81	+ DBG(2,"restore_sigcontext: iaoq is %#lx / %#lx\n",
82	82	regs->iaoq[0],regs->iaoq[1]);
83	83	DBG(2,"restore_sigcontext: r28 is %ld\n", regs->gr[28]);
84	84	return err;

arch/powerpc/mm/init_32.c+1−1

@@ -52,7 +52,7 @@ · 51 unmodified lines
52	52	#if defined(CONFIG_KERNEL_START_BOOL) \|\| defined(CONFIG_LOWMEM_SIZE_BOOL)
53	53	/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
54	54	#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
55		−#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
	55	+#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_KERNEL_START"
56	56	#endif
57	57	#endif
58	58	#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE

crypto/api.c+1−1

@@ -391,7 +391,7 @@ EXPORT_SYMBOL_GPL(__crypto_alloc_tfm); · 390 unmodified lines
391	391	* @mask: Mask for type comparison
392	392	*
393	393	* This function should not be used by new algorithm types.
394		− * Plesae use crypto_alloc_tfm instead.
	394	+ * Please use crypto_alloc_tfm instead.
395	395	*
396	396	* crypto_alloc_base() will first attempt to locate an already loaded
397	397	* algorithm. If that fails and the kernel supports dynamically loadable

drivers/block/drbd/drbd_bitmap.c+1−1

@@ -393,7 +393,7 @@ static struct page *bm_realloc_pages(struct drbd_bitmap b, unsigned long want) · 392 unmodified lines
393	393	* we must not block on IO to ourselves.
394	394	* Context is receiver thread or dmsetup. */
395	395	bytes = sizeof(struct page )want;
396		− new_pages = kzalloc(bytes, GFP_NOIO);
	396	+ new_pages = kzalloc(bytes, GFP_NOIO \| __GFP_NOWARN);
397	397	if (!new_pages) {
398	398	new_pages = __vmalloc(bytes,
399	399	GFP_NOIO \| __GFP_HIGHMEM \| __GFP_ZERO,

drivers/clocksource/acpi_pm.c+2−2

@@ -200,14 +200,14 @@ static int __init init_acpi_pm_clocksource(void) · 199 unmodified lines
200	200	if ((value2 < value1) && ((value2) < 0xFFF))
201	201	break;
202	202	printk(KERN_INFO "PM-Timer had inconsistent results:"
203		− " 0x%#llx, 0x%#llx - aborting.\n",
	203	+ " %#llx, %#llx - aborting.\n",
204	204	value1, value2);
205	205	pmtmr_ioport = 0;
206	206	return -EINVAL;
207	207	}
208	208	if (i == ACPI_PM_READ_CHECKS) {
209	209	printk(KERN_INFO "PM-Timer failed consistency check "
210		− " (0x%#llx) - aborting.\n", value1);
	210	+ " (%#llx) - aborting.\n", value1);
211	211	pmtmr_ioport = 0;
212	212	return -ENODEV;
213	213	}

drivers/crypto/ux500/hash/hash_core.c+1−1

@@ -282,7 +282,7 @@ static int get_empty_message_digest( · 281 unmodified lines
282	282	}
283	283	} else {
284	284	dev_dbg(device_data->dev, "[%s] Continue hash "
285		− "calculation, since hmac key avalable",
	285	+ "calculation, since hmac key available",
286	286	__func__);
287	287	}
288	288	}

drivers/gpu/drm/radeon/r300.c+1−1

@@ -1541,7 +1541,7 @@ int r300_init(struct radeon_device *rdev) · 1540 unmodified lines
1541	1541	rdev->accel_working = true;
1542	1542	r = r300_startup(rdev);
1543	1543	if (r) {
1544		− /* Somethings want wront with the accel init stop accel */
	1544	+ /* Something went wrong with the accel init, so stop accel */
1545	1545	dev_err(rdev->dev, "Disabling GPU acceleration\n");
1546	1546	r100_cp_fini(rdev);
1547	1547	radeon_wb_fini(rdev);

drivers/infiniband/hw/ehca/ipz_pt_fn.c+2−1

@@ -222,7 +222,8 @@ int ipz_queue_ctor(struct ehca_pd pd, struct ipz_queue queue, · 221 unmodified lines
222	222	queue->small_page = NULL;
223	223
224	224	/* allocate queue page pointers */
225		− queue->queue_pages = kzalloc(nr_of_pages * sizeof(void *), GFP_KERNEL);
	225	+ queue->queue_pages = kzalloc(nr_of_pages * sizeof(void *),
	226	+ GFP_KERNEL \| __GFP_NOWARN);
226	227	if (!queue->queue_pages) {
227	228	queue->queue_pages = vzalloc(nr_of_pages * sizeof(void *));
228	229	if (!queue->queue_pages) {

drivers/media/usb/gspca/vicam.c+1−1

@@ -6,7 +6,7 @@ · 5 unmodified lines
6	6	* Based on the usbvideo vicam driver, which is:
7	7	*
8	8	* Copyright (c) 2002 Joe Burks (jburks@wavicle.org),
9		− * Christopher L Cheney (ccheney@cheney.cx),
	9	+ * Chris Cheney (chris.cheney@gmail.com),
10	10	* Pavel Machek (pavel@ucw.cz),
11	11	* John Tyner (jtyner@cs.ucr.edu),
12	12	* Monroe Williams (monroe@pobox.com)

drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c+1−1

@@ -1157,7 +1157,7 @@ static void cxgb_redirect(struct dst_entry old, struct dst_entry new, · 1156 unmodified lines
1157	1157	*/
1158	1158	void *cxgb_alloc_mem(unsigned long size)
1159	1159	{
1160		− void *p = kzalloc(size, GFP_KERNEL);
	1160	+ void *p = kzalloc(size, GFP_KERNEL \| __GFP_NOWARN);
1161	1161
1162	1162	if (!p)
1163	1163	p = vzalloc(size);

drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c+1−1

@@ -1142,7 +1142,7 @@ out: release_firmware(fw); · 1141 unmodified lines
1142	1142	*/
1143	1143	void *t4_alloc_mem(size_t size)
1144	1144	{
1145		− void *p = kzalloc(size, GFP_KERNEL);
	1145	+ void *p = kzalloc(size, GFP_KERNEL \| __GFP_NOWARN);
1146	1146
1147	1147	if (!p)
1148	1148	p = vzalloc(size);

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c+1−1

@@ -3148,7 +3148,7 @@ int qlcnic_83xx_set_settings(struct qlcnic_adapter *adapter, · 3147 unmodified lines
3148	3148	status = qlcnic_83xx_set_port_config(adapter);
3149	3149	if (status) {
3150	3150	dev_info(&adapter->pdev->dev,
3151		− "Faild to Set Link Speed and autoneg.\n");
	3151	+ "Failed to Set Link Speed and autoneg.\n");
3152	3152	adapter->ahw->port_config = config;
3153	3153	}
3154	3154	return status;

drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c+1−1

@@ -1781,7 +1781,7 @@ static int qlcnic_83xx_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, · 1780 unmodified lines
1781	1781	break;
1782	1782	default:
1783	1783	dev_info(&adapter->pdev->dev,
1784		− "Unkonwn opcode: 0x%x\n", opcode);
	1784	+ "Unknown opcode: 0x%x\n", opcode);
1785	1785	goto skip;
1786	1786	}
1787	1787

drivers/net/ethernet/sis/sis900.c+1−1

@@ -1709,7 +1709,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance) · 1708 unmodified lines
1709	1709
1710	1710	if(netif_msg_intr(sis_priv))
1711	1711	printk(KERN_DEBUG "%s: exiting interrupt, "
1712		− "interrupt status = 0x%#8.8x.\n",
	1712	+ "interrupt status = %#8.8x\n",
1713	1713	net_dev->name, sr32(isr));
1714	1714
1715	1715	spin_unlock (&sis_priv->lock);

drivers/net/wireless/cw1200/wsm.c+1−1

@@ -1199,7 +1199,7 @@ bool wsm_flush_tx(struct cw1200_common *priv) · 1198 unmodified lines
1199	1199
1200	1200	if (priv->bh_error) {
1201	1201	/* In case of failure do not wait for magic. */
1202		− pr_err("[WSM] Fatal error occured, will not flush TX.\n");
	1202	+ pr_err("[WSM] Fatal error occurred, will not flush TX.\n");
1203	1203	return false;
1204	1204	} else {
1205	1205	/* Get a timestamp of "oldest" frame */

drivers/net/wireless/iwlwifi/mvm/time-event.c+1−1

@@ -199,7 +199,7 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm, · 198 unmodified lines
199	199	* and know the dtim period.
200	200	*/
201	201	iwl_mvm_te_check_disconnect(mvm, te_data->vif,
202		− "No assocation and the time event is over already...");
	202	+ "No association and the time event is over already...");
203	203	iwl_mvm_te_clear_data(mvm, te_data);
204	204	} else if (le32_to_cpu(notif->action) & TE_V2_NOTIF_HOST_EVENT_START) {
205	205	te_data->running = true;

drivers/net/wireless/rtlwifi/rtl8188ee/fw.c+2−2

@@ -341,7 +341,7 @@ static void _rtl88e_fill_h2c_command(struct ieee80211_hw *hw, · 340 unmodified lines
341	341	wait_h2c_limit--;
342	342	if (wait_h2c_limit == 0) {
343	343	RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
344		− "Wating too long for FW read "
	344	+ "Waiting too long for FW read "
345	345	"clear HMEBox(%d)!\n", boxnum);
346	346	break;
347	347	}
@@ -351,7 +351,7 @@ static void _rtl88e_fill_h2c_command(struct ieee80211_hw *hw, · 3 unmodified lines
351	351	isfw_read = _rtl88e_check_fw_read_last_h2c(hw, boxnum);
352	352	u1b_tmp = rtl_read_byte(rtlpriv, 0x130);
353	353	RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
354		− "Wating for FW read clear HMEBox(%d)!!! "
	354	+ "Waiting for FW read clear HMEBox(%d)!!! "
355	355	"0x130 = %2x\n", boxnum, u1b_tmp);
356	356	}
357	357

drivers/net/wireless/rtlwifi/rtl8192de/dm.c+1−1

@@ -416,7 +416,7 @@ static void rtl92d_dm_dig(struct ieee80211_hw *hw) · 415 unmodified lines
416	416
417	417	/* because we will send data pkt when scanning
418	418	* this will cause some ap like gear-3700 wep TP
419		− * lower if we retrun here, this is the diff of
	419	+ * lower if we return here, this is the diff of
420	420	* mac80211 driver vs ieee80211 driver */
421	421	/* if (rtlpriv->mac80211.act_scanning)
422	422	* return; */

drivers/net/wireless/rtlwifi/rtl8723ae/fw.c+2−2

@@ -330,7 +330,7 @@ static void _rtl8723ae_fill_h2c_command(struct ieee80211_hw *hw, · 329 unmodified lines
330	330	wait_h2c_limmit--;
331	331	if (wait_h2c_limmit == 0) {
332	332	RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
333		− "Wating too long for FW read clear HMEBox(%d)!\n",
	333	+ "Waiting too long for FW read clear HMEBox(%d)!\n",
334	334	boxnum);
335	335	break;
336	336	}
@@ -340,7 +340,7 @@ static void _rtl8723ae_fill_h2c_command(struct ieee80211_hw *hw, · 3 unmodified lines
340	340	isfw_rd = rtl8723ae_check_fw_read_last_h2c(hw, boxnum);
341	341	u1tmp = rtl_read_byte(rtlpriv, 0x1BF);
342	342	RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
343		− "Wating for FW read clear HMEBox(%d)!!! "
	343	+ "Waiting for FW read clear HMEBox(%d)!!! "
344	344	"0x1BF = %2x\n", boxnum, u1tmp);
345	345	}
346	346

drivers/power/88pm860x_charger.c+2−2

@@ -554,7 +554,7 @@ static irqreturn_t pm860x_vchg_handler(int irq, void *data) · 553 unmodified lines
554	554	OVTEMP_AUTORECOVER,
555	555	OVTEMP_AUTORECOVER);
556	556	dev_dbg(info->dev,
557		− "%s, pm8606 over-temp occure\n", __func__);
	557	+ "%s, pm8606 over-temp occurred\n", __func__);
558	558	}
559	559	}
560	560
@@ -562,7 +562,7 @@ static irqreturn_t pm860x_vchg_handler(int irq, void *data) · 1 unmodified line
562	562	set_vchg_threshold(info, VCHG_OVP_LOW, 0);
563	563	info->allowed = 0;
564	564	dev_dbg(info->dev,
565		− "%s,pm8607 over-vchg occure,vchg = %dmv\n",
	565	+ "%s,pm8607 over-vchg occurred,vchg = %dmv\n",
566	566	__func__, vchg);
567	567	} else if (vchg < VCHG_OVP_LOW) {
568	568	set_vchg_threshold(info, VCHG_NORMAL_LOW,

drivers/power/pm2301_charger.c+1−1

@@ -386,7 +386,7 @@ static int pm2_int_reg2(void *pm2_data, int val) · 385 unmodified lines
386	386	if (val & (PM2XXX_INT3_ITCHPRECHARGEWD \|
387	387	PM2XXX_INT3_ITCHCCWD \| PM2XXX_INT3_ITCHCVWD)) {
388	388	dev_dbg(pm2->dev,
389		− "Watchdog occured for precharge, CC and CV charge\n");
	389	+ "Watchdog occurred for precharge, CC and CV charge\n");
390	390	}
391	391
392	392	return ret;

drivers/scsi/bfa/bfad_im.c+1−1

@@ -206,7 +206,7 @@ bfad_im_abort_handler(struct scsi_cmnd *cmnd) · 205 unmodified lines
206	206	spin_lock_irqsave(&bfad->bfad_lock, flags);
207	207	hal_io = (struct bfa_ioim_s *) cmnd->host_scribble;
208	208	if (!hal_io) {
209		− /* IO has been completed, retrun success */
	209	+ /* IO has been completed, return success */
210	210	rc = SUCCESS;
211	211	goto out;
212	212	}

drivers/scsi/cxgbi/libcxgbi.h+4−4

@@ -658,11 +658,11 @@ static inline u32 cxgbi_tag_nonrsvd_bits(struct cxgbi_tag_format *tformat, · 657 unmodified lines
658	658	static inline void *cxgbi_alloc_big_mem(unsigned int size,
659	659	gfp_t gfp)
660	660	{
661		− void *p = kmalloc(size, gfp);
	661	+ void *p = kzalloc(size, gfp \| __GFP_NOWARN);
	662	+
662	663	if (!p)
663		− p = vmalloc(size);
664		− if (p)
665		− memset(p, 0, size);
	664	+ p = vzalloc(size);
	665	+
666	666	return p;
667	667	}
668	668

drivers/scsi/hpsa.c+1−1

@@ -1054,7 +1054,7 @@ free_and_out: · 1053 unmodified lines
1054	1054	}
1055	1055
1056	1056	/*
1057		− * Lookup bus/target/lun and retrun corresponding struct hpsa_scsi_dev_t *
	1057	+ * Lookup bus/target/lun and return corresponding struct hpsa_scsi_dev_t *
1058	1058	* Assume's h->devlock is held.
1059	1059	*/
1060	1060	static struct hpsa_scsi_dev_t lookup_hpsa_scsi_dev(struct ctlr_info h,

drivers/scsi/lpfc/lpfc_attr.c+4−4

@@ -816,7 +816,7 @@ lpfc_issue_reset(struct device dev, struct device_attribute attr, · 815 unmodified lines
816	816	* the readyness after performing a firmware reset.
817	817	*
818	818	* Returns:
819		− * zero for success, -EPERM when port does not have privilage to perform the
	819	+ * zero for success, -EPERM when port does not have privilege to perform the
820	820	* reset, -EIO when port timeout from recovering from the reset.
821	821	*
822	822	* Note:
@@ -833,7 +833,7 @@ lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *phba) · 10 unmodified lines
833	833	lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
834	834	&portstat_reg.word0);
835	835
836		− /* verify if privilaged for the request operation */
	836	+ /* verify if privileged for the request operation */
837	837	if (!bf_get(lpfc_sliport_status_rn, &portstat_reg) &&
838	838	!bf_get(lpfc_sliport_status_err, &portstat_reg))
839	839	return -EPERM;
@@ -925,9 +925,9 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) · 85 unmodified lines
925	925	rc = lpfc_sli4_pdev_status_reg_wait(phba);
926	926
927	927	if (rc == -EPERM) {
928		− /* no privilage for reset */
	928	+ /* no privilege for reset */
929	929	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
930		− "3150 No privilage to perform the requested "
	930	+ "3150 No privilege to perform the requested "
931	931	"access: x%x\n", reg_val);
932	932	} else if (rc == -EIO) {
933	933	/* reset failed, there is nothing more we can do */

drivers/scsi/lpfc/lpfc_bsg.c+1−1

@@ -2628,7 +2628,7 @@ err_get_xri_exit: · 2627 unmodified lines
2628	2628	* @phba: Pointer to HBA context object
2629	2629	*
2630	2630	* This function allocates BSG_MBOX_SIZE (4KB) page size dma buffer and.
2631		− * retruns the pointer to the buffer.
	2631	+ * returns the pointer to the buffer.
2632	2632	**/
2633	2633	static struct lpfc_dmabuf *
2634	2634	lpfc_bsg_dma_page_alloc(struct lpfc_hba *phba)

drivers/scsi/megaraid/megaraid_mbox.c+5−5

@@ -549,7 +549,7 @@ out_probe_one: · 548 unmodified lines
549	549
550	550	/**
551	551	* megaraid_detach_one - release framework resources and call LLD release routine
552		− * @pdev : handle for our PCI cofiguration space
	552	+ * @pdev : handle for our PCI configuration space
553	553	*
554	554	* This routine is called during driver unload. We free all the allocated
555	555	* resources and call the corresponding LLD so that it can also release all
@@ -979,7 +979,7 @@ megaraid_fini_mbox(adapter_t *adapter) · 423 unmodified lines
979	979	* @adapter : soft state of the raid controller
980	980	*
981	981	* Allocate and align the shared mailbox. This maibox is used to issue
982		− * all the commands. For IO based controllers, the mailbox is also regsitered
	982	+ * all the commands. For IO based controllers, the mailbox is also registered
983	983	* with the FW. Allocate memory for all commands as well.
984	984	* This is our big allocator.
985	985	*/
@@ -2027,7 +2027,7 @@ megaraid_mbox_prepare_pthru(adapter_t adapter, scb_t scb, · 1041 unmodified lines
2027	2027	* @scb : scsi control block
2028	2028	* @scp : scsi command from the mid-layer
2029	2029	*
2030		− * Prepare a command for the scsi physical devices. This rountine prepares
	2030	+ * Prepare a command for the scsi physical devices. This routine prepares
2031	2031	* commands for devices which can take extended CDBs (>10 bytes).
2032	2032	*/
2033	2033	static void
@@ -2586,7 +2586,7 @@ megaraid_abort_handler(struct scsi_cmnd *scp) · 552 unmodified lines
2586	2586	}
2587	2587
2588	2588	/**
2589		− * megaraid_reset_handler - device reset hadler for mailbox based driver
	2589	+ * megaraid_reset_handler - device reset handler for mailbox based driver
2590	2590	* @scp : reference command
2591	2591	*
2592	2592	* Reset handler for the mailbox based controller. First try to find out if
@@ -3446,7 +3446,7 @@ megaraid_mbox_display_scb(adapter_t adapter, scb_t scb) · 853 unmodified lines
3446	3446	* megaraid_mbox_setup_device_map - manage device ids
3447	3447	* @adapter : Driver's soft state
3448	3448	*
3449		− * Manange the device ids to have an appropriate mapping between the kernel
	3449	+ * Manage the device ids to have an appropriate mapping between the kernel
3450	3450	* scsi addresses and megaraid scsi and logical drive addresses. We export
3451	3451	* scsi devices on their actual addresses, whereas the logical drives are
3452	3452	* exported on a virtual scsi channel.

drivers/scsi/megaraid/megaraid_mm.c+1−1

@@ -896,7 +896,7 @@ hinfo_to_cinfo(mraid_hba_info_t hinfo, mcontroller_t cinfo) · 895 unmodified lines
896	896
897	897	/**
898	898	* mraid_mm_register_adp - Registration routine for low level drivers
899		− * @lld_adp : Adapter objejct
	899	+ * @lld_adp : Adapter object
900	900	*/
901	901	int
902	902	mraid_mm_register_adp(mraid_mmadp_t *lld_adp)

drivers/scsi/megaraid/megaraid_sas_fusion.h+1−1

@@ -88,7 +88,7 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE { · 87 unmodified lines
88	88	#define MEGASAS_FUSION_IN_RESET 0
89	89
90	90	/*
91		− * Raid Context structure which describes MegaRAID specific IO Paramenters
	91	+ * Raid Context structure which describes MegaRAID specific IO Parameters
92	92	* This resides at offset 0x60 where the SGL normally starts in MPT IO Frames
93	93	*/
94	94

drivers/scsi/qla2xxx/qla_bsg.c+1−1

@@ -1895,7 +1895,7 @@ done: · 1894 unmodified lines
1895	1895	bsg_job->reply->reply_payload_rcv_len = 0;
1896	1896	bsg_job->reply->result = (DID_OK) << 16;
1897	1897	bsg_job->job_done(bsg_job);
1898		− /* Always retrun success, vendor rsp carries correct status */
	1898	+ /* Always return success, vendor rsp carries correct status */
1899	1899	return 0;
1900	1900	}
1901	1901

drivers/scsi/qla2xxx/qla_mr.c+1−1

@@ -1865,7 +1865,7 @@ qlafx00_fx_disc(scsi_qla_host_t vha, fc_port_t fcport, uint16_t fx_type) · 1864 unmodified lines
1865	1865	p_sysid = utsname();
1866	1866	if (!p_sysid) {
1867	1867	ql_log(ql_log_warn, vha, 0x303c,
1868		− "Not able to get the system informtion\n");
	1868	+ "Not able to get the system information\n");
1869	1869	goto done_free_sp;
1870	1870	}
1871	1871	break;

drivers/spi/spi-bitbang.c+1−1

@@ -40,7 +40,7 @@ · 39 unmodified lines
40	40	* to glue code. These bitbang setup() and cleanup() routines are always
41	41	* used, though maybe they're called from controller-aware code.
42	42	*
43		− * chipselect() and friends may use use spi_device->controller_data and
	43	+ * chipselect() and friends may use spi_device->controller_data and
44	44	* controller registers as appropriate.
45	45	*
46	46	*

drivers/tty/serial/kgdboc.c+1−1

@@ -45,7 +45,7 @@ static int kgdboc_reset_connect(struct input_handler *handler, · 44 unmodified lines
45	45	{
46	46	input_reset_device(dev);
47	47
48		− /* Retrun an error - we do not want to bind, just to reset */
	48	+ /* Return an error - we do not want to bind, just to reset */
49	49	return -ENODEV;
50	50	}
51	51

fs/btrfs/send.c+1−1

@@ -219,7 +219,7 @@ static int fs_path_ensure_buf(struct fs_path *p, int len) · 218 unmodified lines
219	219	len = PAGE_ALIGN(len);
220	220
221	221	if (p->buf == p->inline_buf) {
222		− tmp_buf = kmalloc(len, GFP_NOFS);
	222	+ tmp_buf = kmalloc(len, GFP_NOFS \| __GFP_NOWARN);
223	223	if (!tmp_buf) {
224	224	tmp_buf = vmalloc(len);
225	225	if (!tmp_buf)

fs/ext4/super.c+2−2

@@ -162,7 +162,7 @@ void *ext4_kvmalloc(size_t size, gfp_t flags) · 161 unmodified lines
162	162	{
163	163	void *ret;
164	164
165		− ret = kmalloc(size, flags);
	165	+ ret = kmalloc(size, flags \| __GFP_NOWARN);
166	166	if (!ret)
167	167	ret = __vmalloc(size, flags, PAGE_KERNEL);
168	168	return ret;
@@ -172,7 +172,7 @@ void *ext4_kvzalloc(size_t size, gfp_t flags) · 3 unmodified lines
172	172	{
173	173	void *ret;
174	174
175		− ret = kzalloc(size, flags);
	175	+ ret = kzalloc(size, flags \| __GFP_NOWARN);
176	176	if (!ret)
177	177	ret = __vmalloc(size, flags \| __GFP_ZERO, PAGE_KERNEL);
178	178	return ret;

fs/gfs2/dir.c+1−1

@@ -1859,7 +1859,7 @@ static int leaf_dealloc(struct gfs2_inode *dip, u32 index, u32 len, · 1858 unmodified lines
1859	1859
1860	1860	memset(&rlist, 0, sizeof(struct gfs2_rgrp_list));
1861	1861
1862		− ht = kzalloc(size, GFP_NOFS);
	1862	+ ht = kzalloc(size, GFP_NOFS \| __GFP_NOWARN);
1863	1863	if (ht == NULL)
1864	1864	ht = vzalloc(size);
1865	1865	if (!ht)

include/linux/coda.h+0−1

@@ -60,7 +60,6 @@ Mellon the rights to redistribute these changes without encumbrance. · 59 unmodified lines
60	60
61	61	#if defined(__linux__)
62	62	typedef unsigned long long u_quad_t;
63		−#else
64	63	#endif
65	64	#include <uapi/linux/coda.h>
66	65	#endif

include/linux/ktime.h+15−13

@@ -69,7 +69,7 @@ typedef union ktime ktime_t; /* Kill this */ · 68 unmodified lines
69	69	* @secs: seconds to set
70	70	* @nsecs: nanoseconds to set
71	71	*
72		− * Return the ktime_t representation of the value
	72	+ * Return: The ktime_t representation of the value.
73	73	*/
74	74	static inline ktime_t ktime_set(const long secs, const unsigned long nsecs)
75	75	{
@@ -151,7 +151,7 @@ static inline ktime_t ktime_set(const long secs, const unsigned long nsecs) · 75 unmodified lines
151	151	* @lhs: minuend
152	152	* @rhs: subtrahend
153	153	*
154		− * Returns the remainder of the subtraction
	154	+ * Return: The remainder of the subtraction.
155	155	*/
156	156	static inline ktime_t ktime_sub(const ktime_t lhs, const ktime_t rhs)
157	157	{
@@ -169,7 +169,7 @@ static inline ktime_t ktime_sub(const ktime_t lhs, const ktime_t rhs) · 11 unmodified lines
169	169	* @add1: addend1
170	170	* @add2: addend2
171	171	*
172		− * Returns the sum of @add1 and @add2.
	172	+ * Return: The sum of @add1 and @add2.
173	173	*/
174	174	static inline ktime_t ktime_add(const ktime_t add1, const ktime_t add2)
175	175	{
@@ -195,7 +195,7 @@ static inline ktime_t ktime_add(const ktime_t add1, const ktime_t add2) · 19 unmodified lines
195	195	* @kt: addend
196	196	* @nsec: the scalar nsec value to add
197	197	*
198		− * Returns the sum of @kt and @nsec in ktime_t format
	198	+ * Return: The sum of @kt and @nsec in ktime_t format.
199	199	*/
200	200	extern ktime_t ktime_add_ns(const ktime_t kt, u64 nsec);
201	201
@@ -204,7 +204,7 @@ extern ktime_t ktime_add_ns(const ktime_t kt, u64 nsec); · 2 unmodified lines
204	204	* @kt: minuend
205	205	* @nsec: the scalar nsec value to subtract
206	206	*
207		− * Returns the subtraction of @nsec from @kt in ktime_t format
	207	+ * Return: The subtraction of @nsec from @kt in ktime_t format.
208	208	*/
209	209	extern ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec);
210	210
@@ -212,7 +212,7 @@ extern ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec); · 1 unmodified line
212	212	* timespec_to_ktime - convert a timespec to ktime_t format
213	213	* @ts: the timespec variable to convert
214	214	*
215		− * Returns a ktime_t variable with the converted timespec value
	215	+ * Return: A ktime_t variable with the converted timespec value.
216	216	*/
217	217	static inline ktime_t timespec_to_ktime(const struct timespec ts)
218	218	{
@@ -224,7 +224,7 @@ static inline ktime_t timespec_to_ktime(const struct timespec ts) · 5 unmodified lines
224	224	* timeval_to_ktime - convert a timeval to ktime_t format
225	225	* @tv: the timeval variable to convert
226	226	*
227		− * Returns a ktime_t variable with the converted timeval value
	227	+ * Return: A ktime_t variable with the converted timeval value.
228	228	*/
229	229	static inline ktime_t timeval_to_ktime(const struct timeval tv)
230	230	{
@@ -237,7 +237,7 @@ static inline ktime_t timeval_to_ktime(const struct timeval tv) · 6 unmodified lines
237	237	* ktime_to_timespec - convert a ktime_t variable to timespec format
238	238	* @kt: the ktime_t variable to convert
239	239	*
240		− * Returns the timespec representation of the ktime value
	240	+ * Return: The timespec representation of the ktime value.
241	241	*/
242	242	static inline struct timespec ktime_to_timespec(const ktime_t kt)
243	243	{
@@ -249,7 +249,7 @@ static inline struct timespec ktime_to_timespec(const ktime_t kt) · 5 unmodified lines
249	249	* ktime_to_timeval - convert a ktime_t variable to timeval format
250	250	* @kt: the ktime_t variable to convert
251	251	*
252		− * Returns the timeval representation of the ktime value
	252	+ * Return: The timeval representation of the ktime value.
253	253	*/
254	254	static inline struct timeval ktime_to_timeval(const ktime_t kt)
255	255	{
@@ -262,7 +262,7 @@ static inline struct timeval ktime_to_timeval(const ktime_t kt) · 6 unmodified lines
262	262	* ktime_to_ns - convert a ktime_t variable to scalar nanoseconds
263	263	* @kt: the ktime_t variable to convert
264	264	*
265		− * Returns the scalar nanoseconds representation of @kt
	265	+ * Return: The scalar nanoseconds representation of @kt.
266	266	*/
267	267	static inline s64 ktime_to_ns(const ktime_t kt)
268	268	{
@@ -276,7 +276,9 @@ static inline s64 ktime_to_ns(const ktime_t kt) · 7 unmodified lines
276	276	* @cmp1: comparable1
277	277	* @cmp2: comparable2
278	278	*
279		− * Compare two ktime_t variables, returns 1 if equal
	279	+ * Compare two ktime_t variables.
	280	+ *
	281	+ * Return: 1 if equal.
280	282	*/
281	283	static inline int ktime_equal(const ktime_t cmp1, const ktime_t cmp2)
282	284	{
@@ -288,7 +290,7 @@ static inline int ktime_equal(const ktime_t cmp1, const ktime_t cmp2) · 5 unmodified lines
288	290	* @cmp1: comparable1
289	291	* @cmp2: comparable2
290	292	*
291		− * Returns ...
	293	+ * Return: ...
292	294	* cmp1 < cmp2: return <0
293	295	* cmp1 == cmp2: return 0
294	296	* cmp1 > cmp2: return >0
@@ -342,7 +344,7 @@ extern ktime_t ktime_add_safe(const ktime_t lhs, const ktime_t rhs); · 47 unmodified lines
342	344	* @kt: the ktime_t variable to convert
343	345	* @ts: the timespec variable to store the result in
344	346	*
345		− * Returns true if there was a successful conversion, false if kt was 0.
	347	+ * Return: %true if there was a successful conversion, %false if kt was 0.
346	348	*/
347	349	static inline __must_check bool ktime_to_timespec_cond(const ktime_t kt,
348	350	struct timespec *ts)

kernel/workqueue.c+66−41

@@ -541,6 +541,8 @@ static int worker_pool_assign_id(struct worker_pool *pool) · 540 unmodified lines
541	541	* This must be called either with pwq_lock held or sched RCU read locked.
542	542	* If the pwq needs to be used beyond the locking in effect, the caller is
543	543	* responsible for guaranteeing that the pwq stays online.
	544	+ *
	545	+ * Return: The unbound pool_workqueue for @node.
544	546	*/
545	547	static struct pool_workqueue unbound_pwq_by_node(struct workqueue_struct wq,
546	548	int node)
@@ -639,8 +641,6 @@ static struct pool_workqueue get_work_pwq(struct work_struct work) · 92 unmodified lines
639	641	* get_work_pool - return the worker_pool a given work was associated with
640	642	* @work: the work item of interest
641	643	*
642		− * Return the worker_pool @work was last associated with. %NULL if none.
643		− *
644	644	* Pools are created and destroyed under wq_pool_mutex, and allows read
645	645	* access under sched-RCU read lock. As such, this function should be
646	646	* called under wq_pool_mutex or with preemption disabled.
@@ -649,6 +649,8 @@ static struct pool_workqueue get_work_pwq(struct work_struct work) · 2 unmodified lines
649	649	* mentioned locking is in effect. If the returned pool needs to be used
650	650	* beyond the critical section, the caller is responsible for ensuring the
651	651	* returned pool is and stays online.
	652	+ *
	653	+ * Return: The worker_pool @work was last associated with. %NULL if none.
652	654	*/
653	655	static struct worker_pool get_work_pool(struct work_struct work)
654	656	{
@@ -672,7 +674,7 @@ static struct worker_pool get_work_pool(struct work_struct work) · 17 unmodified lines
672	674	* get_work_pool_id - return the worker pool ID a given work is associated with
673	675	* @work: the work item of interest
674	676	*
675		− * Return the worker_pool ID @work was last associated with.
	677	+ * Return: The worker_pool ID @work was last associated with.
676	678	* %WORK_OFFQ_POOL_NONE if none.
677	679	*/
678	680	static int get_work_pool_id(struct work_struct *work)
@@ -831,7 +833,7 @@ void wq_worker_waking_up(struct task_struct *task, int cpu) · 152 unmodified lines
831	833	* CONTEXT:
832	834	* spin_lock_irq(rq->lock)
833	835	*
834		− * RETURNS:
	836	+ * Return:
835	837	* Worker task on @cpu to wake up, %NULL if none.
836	838	*/
837	839	struct task_struct wq_worker_sleeping(struct task_struct task, int cpu)
@@ -966,8 +968,8 @@ static inline void worker_clr_flags(struct worker *worker, unsigned int flags) · 128 unmodified lines
966	968	* CONTEXT:
967	969	* spin_lock_irq(pool->lock).
968	970	*
969		− * RETURNS:
970		− * Pointer to worker which is executing @work if found, NULL
	971	+ * Return:
	972	+ * Pointer to worker which is executing @work if found, %NULL
971	973	* otherwise.
972	974	*/
973	975	static struct worker find_worker_executing_work(struct worker_pool pool,
@@ -1155,14 +1157,16 @@ out_put: · 181 unmodified lines
1155	1157	* @flags: place to store irq state
1156	1158	*
1157	1159	* Try to grab PENDING bit of @work. This function can handle @work in any
1158		− * stable state - idle, on timer or on worklist. Return values are
	1160	+ * stable state - idle, on timer or on worklist.
1159	1161	*
	1162	+ * Return:
1160	1163	* 1 if @work was pending and we successfully stole PENDING
1161	1164	* 0 if @work was idle and we claimed PENDING
1162	1165	* -EAGAIN if PENDING couldn't be grabbed at the moment, safe to busy-retry
1163	1166	* -ENOENT if someone else is canceling @work, this state may persist
1164	1167	* for arbitrarily long
1165	1168	*
	1169	+ * Note:
1166	1170	* On >= 0 return, the caller owns @work's PENDING bit. To avoid getting
1167	1171	* interrupted while holding PENDING and @work off queue, irq must be
1168	1172	* disabled on entry. This, combined with delayed_work->timer being
@@ -1404,10 +1408,10 @@ retry: · 235 unmodified lines
1404	1408	* @wq: workqueue to use
1405	1409	* @work: work to queue
1406	1410	*
1407		− * Returns %false if @work was already on a queue, %true otherwise.
1408		− *
1409	1411	* We queue the work to a specific CPU, the caller must ensure it
1410	1412	* can't go away.
	1413	+ *
	1414	+ * Return: %false if @work was already on a queue, %true otherwise.
1411	1415	*/
1412	1416	bool queue_work_on(int cpu, struct workqueue_struct *wq,
1413	1417	struct work_struct *work)
@@ -1477,7 +1481,7 @@ static void __queue_delayed_work(int cpu, struct workqueue_struct *wq, · 63 unmodified lines
1477	1481	* @dwork: work to queue
1478	1482	* @delay: number of jiffies to wait before queueing
1479	1483	*
1480		− * Returns %false if @work was already on a queue, %true otherwise. If
	1484	+ * Return: %false if @work was already on a queue, %true otherwise. If
1481	1485	* @delay is zero and @dwork is idle, it will be scheduled for immediate
1482	1486	* execution.
1483	1487	*/
@@ -1513,7 +1517,7 @@ EXPORT_SYMBOL(queue_delayed_work_on); · 29 unmodified lines
1513	1517	* zero, @work is guaranteed to be scheduled immediately regardless of its
1514	1518	* current state.
1515	1519	*
1516		− * Returns %false if @dwork was idle and queued, %true if @dwork was
	1520	+ * Return: %false if @dwork was idle and queued, %true if @dwork was
1517	1521	* pending and its timer was modified.
1518	1522	*
1519	1523	* This function is safe to call from any context including IRQ handler.
@@ -1628,7 +1632,7 @@ static void worker_leave_idle(struct worker *worker) · 108 unmodified lines
1628	1632	* Might sleep. Called without any lock but returns with pool->lock
1629	1633	* held.
1630	1634	*
1631		− * RETURNS:
	1635	+ * Return:
1632	1636	* %true if the associated pool is online (@worker is successfully
1633	1637	* bound), %false if offline.
1634	1638	*/
@@ -1689,7 +1693,7 @@ static struct worker *alloc_worker(void) · 54 unmodified lines
1689	1693	* CONTEXT:
1690	1694	* Might sleep. Does GFP_KERNEL allocations.
1691	1695	*
1692		− * RETURNS:
	1696	+ * Return:
1693	1697	* Pointer to the newly created worker.
1694	1698	*/
1695	1699	static struct worker create_worker(struct worker_pool pool)
@@ -1789,6 +1793,8 @@ static void start_worker(struct worker *worker) · 93 unmodified lines
1789	1793	* @pool: the target pool
1790	1794	*
1791	1795	* Grab the managership of @pool and create and start a new worker for it.
	1796	+ *
	1797	+ * Return: 0 on success. A negative error code otherwise.
1792	1798	*/
1793	1799	static int create_and_start_worker(struct worker_pool *pool)
1794	1800	{
@@ -1933,7 +1939,7 @@ static void pool_mayday_timeout(unsigned long __pool) · 138 unmodified lines
1933	1939	* multiple times. Does GFP_KERNEL allocations. Called only from
1934	1940	* manager.
1935	1941	*
1936		− * RETURNS:
	1942	+ * Return:
1937	1943	* %false if no action was taken and pool->lock stayed locked, %true
1938	1944	* otherwise.
1939	1945	*/
@@ -1990,7 +1996,7 @@ restart: · 50 unmodified lines
1990	1996	* spin_lock_irq(pool->lock) which may be released and regrabbed
1991	1997	* multiple times. Called only from manager.
1992	1998	*
1993		− * RETURNS:
	1999	+ * Return:
1994	2000	* %false if no action was taken and pool->lock stayed locked, %true
1995	2001	* otherwise.
1996	2002	*/
@@ -2033,7 +2039,7 @@ static bool maybe_destroy_workers(struct worker_pool *pool) · 36 unmodified lines
2033	2039	* spin_lock_irq(pool->lock) which may be released and regrabbed
2034	2040	* multiple times. Does GFP_KERNEL allocations.
2035	2041	*
2036		− * RETURNS:
	2042	+ * Return:
2037	2043	* %false if the pool don't need management and the caller can safely start
2038	2044	* processing works, %true indicates that the function released pool->lock
2039	2045	* and reacquired it to perform some management function and that the
@@ -2259,6 +2265,8 @@ static void process_scheduled_works(struct worker *worker) · 219 unmodified lines
2259	2265	* work items regardless of their specific target workqueue. The only
2260	2266	* exception is work items which belong to workqueues with a rescuer which
2261	2267	* will be explained in rescuer_thread().
	2268	+ *
	2269	+ * Return: 0
2262	2270	*/
2263	2271	static int worker_thread(void *__worker)
2264	2272	{
@@ -2357,6 +2365,8 @@ sleep: · 92 unmodified lines
2357	2365	* those works so that forward progress can be guaranteed.
2358	2366	*
2359	2367	* This should happen rarely.
	2368	+ *
	2369	+ * Return: 0
2360	2370	*/
2361	2371	static int rescuer_thread(void *__rescuer)
2362	2372	{
@@ -2529,7 +2539,7 @@ static void insert_wq_barrier(struct pool_workqueue *pwq, · 166 unmodified lines
2529	2539	* CONTEXT:
2530	2540	* mutex_lock(wq->mutex).
2531	2541	*
2532		− * RETURNS:
	2542	+ * Return:
2533	2543	* %true if @flush_color >= 0 and there's something to flush. %false
2534	2544	* otherwise.
2535	2545	*/
@@ -2850,7 +2860,7 @@ static bool __flush_work(struct work_struct *work) · 314 unmodified lines
2850	2860	* Wait until @work has finished execution. @work is guaranteed to be idle
2851	2861	* on return if it hasn't been requeued since flush started.
2852	2862	*
2853		− * RETURNS:
	2863	+ * Return:
2854	2864	* %true if flush_work() waited for the work to finish execution,
2855	2865	* %false if it was already idle.
2856	2866	*/
@@ -2902,7 +2912,7 @@ static bool __cancel_work_timer(struct work_struct *work, bool is_dwork) · 45 unmodified lines
2902	2912	* The caller must ensure that the workqueue on which @work was last
2903	2913	* queued can't be destroyed before this function returns.
2904	2914	*
2905		− * RETURNS:
	2915	+ * Return:
2906	2916	* %true if @work was pending, %false otherwise.
2907	2917	*/
2908	2918	bool cancel_work_sync(struct work_struct *work)
@@ -2919,7 +2929,7 @@ EXPORT_SYMBOL_GPL(cancel_work_sync); · 10 unmodified lines
2919	2929	* immediate execution. Like flush_work(), this function only
2920	2930	* considers the last queueing instance of @dwork.
2921	2931	*
2922		− * RETURNS:
	2932	+ * Return:
2923	2933	* %true if flush_work() waited for the work to finish execution,
2924	2934	* %false if it was already idle.
2925	2935	*/
@@ -2937,11 +2947,15 @@ EXPORT_SYMBOL(flush_delayed_work); · 11 unmodified lines
2937	2947	* cancel_delayed_work - cancel a delayed work
2938	2948	* @dwork: delayed_work to cancel
2939	2949	*
2940		− * Kill off a pending delayed_work. Returns %true if @dwork was pending
2941		− * and canceled; %false if wasn't pending. Note that the work callback
2942		− * function may still be running on return, unless it returns %true and the
2943		− * work doesn't re-arm itself. Explicitly flush or use
2944		− * cancel_delayed_work_sync() to wait on it.
	2950	+ * Kill off a pending delayed_work.
	2951	+ *
	2952	+ * Return: %true if @dwork was pending and canceled; %false if it wasn't
	2953	+ * pending.
	2954	+ *
	2955	+ * Note:
	2956	+ * The work callback function may still be running on return, unless
	2957	+ * it returns %true and the work doesn't re-arm itself. Explicitly flush or
	2958	+ * use cancel_delayed_work_sync() to wait on it.
2945	2959	*
2946	2960	* This function is safe to call from any context including IRQ handler.
2947	2961	*/
@@ -2970,7 +2984,7 @@ EXPORT_SYMBOL(cancel_delayed_work); · 22 unmodified lines
2970	2984	*
2971	2985	* This is cancel_work_sync() for delayed works.
2972	2986	*
2973		− * RETURNS:
	2987	+ * Return:
2974	2988	* %true if @dwork was pending, %false otherwise.
2975	2989	*/
2976	2990	bool cancel_delayed_work_sync(struct delayed_work *dwork)
@@ -2987,7 +3001,7 @@ EXPORT_SYMBOL(cancel_delayed_work_sync); · 10 unmodified lines
2987	3001	* system workqueue and blocks until all CPUs have completed.
2988	3002	* schedule_on_each_cpu() is very slow.
2989	3003	*
2990		− * RETURNS:
	3004	+ * Return:
2991	3005	* 0 on success, -errno on failure.
2992	3006	*/
2993	3007	int schedule_on_each_cpu(work_func_t func)
@@ -3055,7 +3069,7 @@ EXPORT_SYMBOL(flush_scheduled_work); · 61 unmodified lines
3055	3069	* Executes the function immediately if process context is available,
3056	3070	* otherwise schedules the function for delayed execution.
3057	3071	*
3058		− * Returns: 0 - function was executed
	3072	+ * Return: 0 - function was executed
3059	3073	* 1 - function was scheduled for execution
3060	3074	*/
3061	3075	int execute_in_process_context(work_func_t fn, struct execute_work *ew)
@@ -3315,7 +3329,7 @@ static void wq_device_release(struct device *dev) · 253 unmodified lines
3315	3329	* apply_workqueue_attrs() may race against userland updating the
3316	3330	* attributes.
3317	3331	*
3318		− * Returns 0 on success, -errno on failure.
	3332	+ * Return: 0 on success, -errno on failure.
3319	3333	*/
3320	3334	int workqueue_sysfs_register(struct workqueue_struct *wq)
3321	3335	{
@@ -3408,7 +3422,9 @@ void free_workqueue_attrs(struct workqueue_attrs *attrs) · 86 unmodified lines
3408	3422	* @gfp_mask: allocation mask to use
3409	3423	*
3410	3424	* Allocate a new workqueue_attrs, initialize with default settings and
3411		− * return it. Returns NULL on failure.
	3425	+ * return it.
	3426	+ *
	3427	+ * Return: The allocated new workqueue_attr on success. %NULL on failure.
3412	3428	*/
3413	3429	struct workqueue_attrs *alloc_workqueue_attrs(gfp_t gfp_mask)
3414	3430	{
@@ -3467,7 +3483,8 @@ static bool wqattrs_equal(const struct workqueue_attrs *a, · 52 unmodified lines
3467	3483	* @pool: worker_pool to initialize
3468	3484	*
3469	3485	* Initiailize a newly zalloc'd @pool. It also allocates @pool->attrs.
3470		− * Returns 0 on success, -errno on failure. Even on failure, all fields
	3486	+ *
	3487	+ * Return: 0 on success, -errno on failure. Even on failure, all fields
3471	3488	* inside @pool proper are initialized and put_unbound_pool() can be called
3472	3489	* on @pool safely to release it.
3473	3490	*/
@@ -3574,9 +3591,12 @@ static void put_unbound_pool(struct worker_pool *pool) · 100 unmodified lines
3574	3591	* Obtain a worker_pool which has the same attributes as @attrs, bump the
3575	3592	* reference count and return it. If there already is a matching
3576	3593	* worker_pool, it will be used; otherwise, this function attempts to
3577		− * create a new one. On failure, returns NULL.
	3594	+ * create a new one.
3578	3595	*
3579	3596	* Should be called with wq_pool_mutex held.
	3597	+ *
	3598	+ * Return: On success, a worker_pool with the same attributes as @attrs.
	3599	+ * On failure, %NULL.
3580	3600	*/
3581	3601	static struct worker_pool get_unbound_pool(const struct workqueue_attrs attrs)
3582	3602	{
@@ -3812,9 +3832,7 @@ static void free_unbound_pwq(struct pool_workqueue *pwq) · 229 unmodified lines
3812	3832	*
3813	3833	* Calculate the cpumask a workqueue with @attrs should use on @node. If
3814	3834	* @cpu_going_down is >= 0, that cpu is considered offline during
3815		− * calculation. The result is stored in @cpumask. This function returns
3816		− * %true if the resulting @cpumask is different from @attrs->cpumask,
3817		− * %false if equal.
	3835	+ * calculation. The result is stored in @cpumask.
3818	3836	*
3819	3837	* If NUMA affinity is not enabled, @attrs->cpumask is always used. If
3820	3838	* enabled and @node has online CPUs requested by @attrs, the returned
@@ -3823,6 +3841,9 @@ static void free_unbound_pwq(struct pool_workqueue *pwq) · 2 unmodified lines
3823	3841	*
3824	3842	* The caller is responsible for ensuring that the cpumask of @node stays
3825	3843	* stable.
	3844	+ *
	3845	+ * Return: %true if the resulting @cpumask is different from @attrs->cpumask,
	3846	+ * %false if equal.
3826	3847	*/
3827	3848	static bool wq_calc_node_cpumask(const struct workqueue_attrs *attrs, int node,
3828	3849	int cpu_going_down, cpumask_t *cpumask)
@@ -3876,8 +3897,9 @@ static struct pool_workqueue numa_pwq_tbl_install(struct workqueue_struct wq, · 47 unmodified lines
3876	3897	* items finish. Note that a work item which repeatedly requeues itself
3877	3898	* back-to-back will stay on its current pwq.
3878	3899	*
3879		− * Performs GFP_KERNEL allocations. Returns 0 on success and -errno on
3880		− * failure.
	3900	+ * Performs GFP_KERNEL allocations.
	3901	+ *
	3902	+ * Return: 0 on success and -errno on failure.
3881	3903	*/
3882	3904	int apply_workqueue_attrs(struct workqueue_struct *wq,
3883	3905	const struct workqueue_attrs *attrs)
@@ -4345,6 +4367,8 @@ EXPORT_SYMBOL_GPL(workqueue_set_max_active); · 461 unmodified lines
4345	4367	*
4346	4368	* Determine whether %current is a workqueue rescuer. Can be used from
4347	4369	* work functions to determine whether it's being run off the rescuer task.
	4370	+ *
	4371	+ * Return: %true if %current is a workqueue rescuer. %false otherwise.
4348	4372	*/
4349	4373	bool current_is_workqueue_rescuer(void)
4350	4374	{
@@ -4368,7 +4392,7 @@ bool current_is_workqueue_rescuer(void) · 17 unmodified lines
4368	4392	* workqueue being congested on one CPU doesn't mean the workqueue is also
4369	4393	* contested on other CPUs / NUMA nodes.
4370	4394	*
4371		− * RETURNS:
	4395	+ * Return:
4372	4396	* %true if congested, %false otherwise.
4373	4397	*/
4374	4398	bool workqueue_congested(int cpu, struct workqueue_struct *wq)
@@ -4401,7 +4425,7 @@ EXPORT_SYMBOL_GPL(workqueue_congested); · 26 unmodified lines
4401	4425	* synchronization around this function and the test result is
4402	4426	* unreliable and only useful as advisory hints or for debugging.
4403	4427	*
4404		− * RETURNS:
	4428	+ * Return:
4405	4429	* OR'd bitmask of WORK_BUSY_* bits.
4406	4430	*/
4407	4431	unsigned int work_busy(struct work_struct *work)
@@ -4779,9 +4803,10 @@ static void work_for_cpu_fn(struct work_struct *work) · 371 unmodified lines
4779	4803	* @fn: the function to run
4780	4804	* @arg: the function arg
4781	4805	*
4782		− * This will return the value @fn returns.
4783	4806	* It is up to the caller to ensure that the cpu doesn't go offline.
4784	4807	* The caller must not hold any locks which would prevent @fn from completing.
	4808	+ *
	4809	+ * Return: The value @fn returns.
4785	4810	*/
4786	4811	long work_on_cpu(int cpu, long (fn)(void ), void *arg)
4787	4812	{
@@ -4853,7 +4878,7 @@ void freeze_workqueues_begin(void) · 65 unmodified lines
4853	4878	* CONTEXT:
4854	4879	* Grabs and releases wq_pool_mutex.
4855	4880	*
4856		− * RETURNS:
	4881	+ * Return:
4857	4882	* %true if some freezable workqueues are still busy. %false if freezing
4858	4883	* is complete.
4859	4884	*/

mm/memory-failure.c+1−1

@@ -1265,7 +1265,7 @@ void memory_failure_queue(unsigned long pfn, int trapno, int flags) · 1264 unmodified lines
1265	1265	if (kfifo_put(&mf_cpu->fifo, &entry))
1266	1266	schedule_work_on(smp_processor_id(), &mf_cpu->work);
1267	1267	else
1268		− pr_err("Memory failure: buffer overflow when queuing memory failure at 0x%#lx\n",
	1268	+ pr_err("Memory failure: buffer overflow when queuing memory failure at %#lx\n",
1269	1269	pfn);
1270	1270	spin_unlock_irqrestore(&mf_cpu->lock, proc_flags);
1271	1271	put_cpu_var(memory_failure_cpu);

mm/page_alloc.c+1−1

@@ -768,7 +768,7 @@ void __init __free_pages_bootmem(struct page *page, unsigned int order) · 767 unmodified lines
768	768	}
769	769
770	770	#ifdef CONFIG_CMA
771		−/* Free whole pageblock and set it's migration type to MIGRATE_CMA. */
	771	+/* Free whole pageblock and set its migration type to MIGRATE_CMA. */
772	772	void __init init_cma_reserved_pageblock(struct page *page)
773	773	{
774	774	unsigned i = pageblock_nr_pages;

mm/page_isolation.c+4−4

@@ -226,9 +226,9 @@ int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn, · 225 unmodified lines
226	226	int ret;
227	227
228	228	/*
229		− * Note: pageblock_nr_page != MAX_ORDER. Then, chunks of free page
230		− * is not aligned to pageblock_nr_pages.
231		− * Then we just check pagetype fist.
	229	+ * Note: pageblock_nr_pages != MAX_ORDER. Then, chunks of free pages
	230	+ * are not aligned to pageblock_nr_pages.
	231	+ * Then we just check migratetype first.
232	232	*/
233	233	for (pfn = start_pfn; pfn < end_pfn; pfn += pageblock_nr_pages) {
234	234	page = __first_valid_page(pfn, pageblock_nr_pages);
@@ -238,7 +238,7 @@ int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn, · 3 unmodified lines
238	238	page = __first_valid_page(start_pfn, end_pfn - start_pfn);
239	239	if ((pfn < end_pfn) \|\| !page)
240	240	return -EBUSY;
241		− /* Check all pages are free or Marked as ISOLATED */
	241	+ /* Check all pages are free or marked as ISOLATED */
242	242	zone = page_zone(page);
243	243	spin_lock_irqsave(&zone->lock, flags);
244	244	ret = __test_page_isolated_in_pageblock(start_pfn, end_pfn,

net/sched/sch_choke.c+2−1

@@ -438,7 +438,8 @@ static int choke_change(struct Qdisc sch, struct nlattr opt) · 437 unmodified lines
438	438	if (mask != q->tab_mask) {
439	439	struct sk_buff **ntab;
440	440
441		− ntab = kcalloc(mask + 1, sizeof(struct sk_buff *), GFP_KERNEL);
	441	+ ntab = kcalloc(mask + 1, sizeof(struct sk_buff *),
	442	+ GFP_KERNEL \| __GFP_NOWARN);
442	443	if (!ntab)
443	444	ntab = vzalloc((mask + 1) * sizeof(struct sk_buff *));
444	445	if (!ntab)

sound/pci/ens1370.c+1−1

@@ -1842,7 +1842,7 @@ static int snd_ensoniq_create_gameport(struct ensoniq *ensoniq, int dev) · 1841 unmodified lines
1842	1842
1843	1843	default:
1844	1844	if (!request_region(io_port, 8, "ens137x: gameport")) {
1845		− printk(KERN_WARNING "ens137x: gameport io port 0x%#x in use\n",
	1845	+ printk(KERN_WARNING "ens137x: gameport io port %#x in use\n",
1846	1846	io_port);
1847	1847	return -EBUSY;
1848	1848	}

sound/pci/via82xx.c+1−1

@@ -1940,7 +1940,7 @@ static int snd_via686_create_gameport(struct via82xx chip, unsigned char legac · 1939 unmodified lines
1940	1940
1941	1941	r = request_region(JOYSTICK_ADDR, 8, "VIA686 gameport");
1942	1942	if (!r) {
1943		− printk(KERN_WARNING "via82xx: cannot reserve joystick port 0x%#x\n",
	1943	+ printk(KERN_WARNING "via82xx: cannot reserve joystick port %#x\n",
1944	1944	JOYSTICK_ADDR);
1945	1945	return -EBUSY;
1946	1946	}