Pull libata updates from Jens Axboe: "The big change in this round is that we're finally in a position where we can sanely remove the old drivers/ide/ code, as libata covers everything we need by now. This is exciting for two reasons: 1) we delete a lot of legacy code that doesn't really meet the standards we have today, and 2) it enables us to clean up various bits in the block layer that exist only because of the old IDE code. Outside of that, just a few minor fixes here, fixups for warnings, etc" * tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits) ata: rb532_cf: remove redundant codes ide: remove the legacy ide driver m68k: use libata instead of the legacy ide driver ARM: disable CONFIG_IDE in pxa_defconfig ARM: disable CONFIG_IDE in footbridge_defconfig alpha: use libata instead of the legacy ide driver pata_cypress: add a module option to disable BM-DMA ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht' ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in ' ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht' ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht' ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht' ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht' ata: sata_mv: Do not over-write initialise fields in 'mv6_sht' ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht' ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT() ata: include: libata: Move fields commonly over-written to separate MACRO ahci: Add support for Dell S140 and later controllers ata: ahci_sunxi: Disable DIPM ...
Showing the changes to Documentation/userspace-api (1 of 136 files). Show all
Unified · Split
| @@ -7,8 +7,8 @@ Summary of `HDIO_` ioctl calls · 6 unmodified lines | ||
| 7 | 7 | November, 2004 |
| 8 | 8 | |
| 9 | 9 | This document attempts to describe the ioctl(2) calls supported by |
| 10 | −the HD/IDE layer. These are by-and-large implemented (as of Linux 2.6) | |
| 11 | −in drivers/ide/ide.c and drivers/block/scsi_ioctl.c | |
| 10 | +the HD/IDE layer. These are by-and-large implemented (as of Linux 5.11) | |
| 11 | +drivers/ata/libata-scsi.c. | |
| 12 | 12 | |
| 13 | 13 | ioctl values are listed in <linux/hdreg.h>. As of this writing, they |
| 14 | 14 | are as follows: |
| @@ -17,50 +17,17 @@ are as follows: · 2 unmodified lines | ||
| 17 | 17 | |
| 18 | 18 | ======================= ======================================= |
| 19 | 19 | HDIO_GETGEO get device geometry |
| 20 | − HDIO_GET_UNMASKINTR get current unmask setting | |
| 21 | − HDIO_GET_MULTCOUNT get current IDE blockmode setting | |
| 22 | − HDIO_GET_QDMA get use-qdma flag | |
| 23 | − HDIO_SET_XFER set transfer rate via proc | |
| 24 | − HDIO_OBSOLETE_IDENTITY OBSOLETE, DO NOT USE | |
| 25 | − HDIO_GET_KEEPSETTINGS get keep-settings-on-reset flag | |
| 26 | 20 | HDIO_GET_32BIT get current io_32bit setting |
| 27 | − HDIO_GET_NOWERR get ignore-write-error flag | |
| 28 | − HDIO_GET_DMA get use-dma flag | |
| 29 | − HDIO_GET_NICE get nice flags | |
| 30 | 21 | HDIO_GET_IDENTITY get IDE identification info |
| 31 | − HDIO_GET_WCACHE get write cache mode on|off | |
| 32 | − HDIO_GET_ACOUSTIC get acoustic value | |
| 33 | − HDIO_GET_ADDRESS get sector addressing mode | |
| 34 | − HDIO_GET_BUSSTATE get the bus state of the hwif | |
| 35 | − HDIO_TRISTATE_HWIF execute a channel tristate | |
| 36 | − HDIO_DRIVE_RESET execute a device reset | |
| 37 | 22 | HDIO_DRIVE_TASKFILE execute raw taskfile |
| 38 | 23 | HDIO_DRIVE_TASK execute task and special drive command |
| 39 | 24 | HDIO_DRIVE_CMD execute a special drive command |
| 40 | − HDIO_DRIVE_CMD_AEB HDIO_DRIVE_TASK | |
| 41 | 25 | ======================= ======================================= |
| 42 | 26 | |
| 43 | 27 | ioctls that pass non-pointer values: |
| 44 | 28 | |
| 45 | 29 | ======================= ======================================= |
| 46 | − HDIO_SET_MULTCOUNT change IDE blockmode | |
| 47 | − HDIO_SET_UNMASKINTR permit other irqs during I/O | |
| 48 | − HDIO_SET_KEEPSETTINGS keep ioctl settings on reset | |
| 49 | 30 | HDIO_SET_32BIT change io_32bit flags |
| 50 | − HDIO_SET_NOWERR change ignore-write-error flag | |
| 51 | − HDIO_SET_DMA change use-dma flag | |
| 52 | − HDIO_SET_PIO_MODE reconfig interface to new speed | |
| 53 | − HDIO_SCAN_HWIF register and (re)scan interface | |
| 54 | − HDIO_SET_NICE set nice flags | |
| 55 | − HDIO_UNREGISTER_HWIF unregister interface | |
| 56 | − HDIO_SET_WCACHE change write cache enable-disable | |
| 57 | − HDIO_SET_ACOUSTIC change acoustic behavior | |
| 58 | − HDIO_SET_BUSSTATE set the bus state of the hwif | |
| 59 | − HDIO_SET_QDMA change use-qdma flag | |
| 60 | − HDIO_SET_ADDRESS change lba addressing modes | |
| 61 | − | |
| 62 | − HDIO_SET_IDE_SCSI Set scsi emulation mode on/off | |
| 63 | − HDIO_SET_SCSI_IDE not implemented yet | |
| 64 | 31 | ======================= ======================================= |
| 65 | 32 | |
| 66 | 33 | |
| @@ -137,512 +104,49 @@ HDIO_GETGEO · 70 unmodified lines | ||
| 137 | 104 | |
| 138 | 105 | |
| 139 | 106 | |
| 140 | − | |
| 141 | −HDIO_GET_UNMASKINTR | |
| 142 | − get current unmask setting | |
| 143 | − | |
| 144 | − | |
| 145 | − usage:: | |
| 146 | − | |
| 147 | − long val; | |
| 148 | − | |
| 149 | − ioctl(fd, HDIO_GET_UNMASKINTR, &val); | |
| 150 | − | |
| 151 | − inputs: | |
| 152 | − none | |
| 153 | − | |
| 154 | − | |
| 155 | − | |
| 156 | − outputs: | |
| 157 | − The value of the drive's current unmask setting | |
| 158 | − | |
| 159 | − | |
| 160 | − | |
| 161 | − | |
| 162 | − | |
| 163 | −HDIO_SET_UNMASKINTR | |
| 164 | − permit other irqs during I/O | |
| 165 | − | |
| 166 | − | |
| 167 | − usage:: | |
| 168 | − | |
| 169 | − unsigned long val; | |
| 170 | − | |
| 171 | − ioctl(fd, HDIO_SET_UNMASKINTR, val); | |
| 172 | − | |
| 173 | − inputs: | |
| 174 | − New value for unmask flag | |
| 175 | − | |
| 176 | − | |
| 177 | − | |
| 178 | − outputs: | |
| 179 | − none | |
| 180 | − | |
| 181 | − | |
| 182 | − | |
| 183 | − error return: | |
| 184 | − - EINVAL Called on a partition instead of the whole disk device | |
| 185 | − - EACCES Access denied: requires CAP_SYS_ADMIN | |
| 186 | − - EINVAL value out of range [0 1] | |
| 187 | − - EBUSY Controller busy | |
| 188 | − | |
| 189 | − | |
| 190 | − | |
| 191 | − | |
| 192 | −HDIO_GET_MULTCOUNT | |
| 193 | − get current IDE blockmode setting | |
| 194 | − | |
| 195 | − | |
| 196 | − usage:: | |
| 197 | − | |
| 198 | − long val; | |
| 199 | − | |
| 200 | − ioctl(fd, HDIO_GET_MULTCOUNT, &val); | |
| 201 | − | |
| 202 | − inputs: | |
| 203 | − none | |
| 204 | − | |
| 205 | − | |
| 206 | − | |
| 207 | − outputs: | |
| 208 | − The value of the current IDE block mode setting. This | |
| 209 | − controls how many sectors the drive will transfer per | |
| 210 | − interrupt. | |
| 211 | − | |
| 212 | − | |
| 213 | − | |
| 214 | −HDIO_SET_MULTCOUNT | |
| 215 | − change IDE blockmode | |
| 216 | − | |
| 217 | − | |
| 218 | − usage:: | |
| 219 | − | |
| 220 | − int val; | |
| 221 | − | |
| 222 | − ioctl(fd, HDIO_SET_MULTCOUNT, val); | |
| 223 | − | |
| 224 | − inputs: | |
| 225 | − New value for IDE block mode setting. This controls how many | |
| 226 | − sectors the drive will transfer per interrupt. | |
| 227 | − | |
| 228 | − outputs: | |
| 229 | − none | |
| 230 | − | |
| 231 | − | |
| 232 | − | |
| 233 | − error return: | |
| 234 | − - EINVAL Called on a partition instead of the whole disk device | |
| 235 | − - EACCES Access denied: requires CAP_SYS_ADMIN | |
| 236 | − - EINVAL value out of range supported by disk. | |
| 237 | − - EBUSY Controller busy or blockmode already set. | |
| 238 | − - EIO Drive did not accept new block mode. | |
| 239 | − | |
| 240 | − notes: | |
| 241 | − Source code comments read:: | |
| 242 | − | |
| 243 | − This is tightly woven into the driver->do_special cannot | |
| 244 | − touch. DON'T do it again until a total personality rewrite | |
| 245 | − is committed. | |
| 246 | − | |
| 247 | − If blockmode has already been set, this ioctl will fail with | |
| 248 | − -EBUSY | |
| 249 | − | |
| 250 | − | |
| 251 | − | |
| 252 | −HDIO_GET_QDMA | |
| 253 | − get use-qdma flag | |
| 254 | − | |
| 255 | − | |
| 256 | − Not implemented, as of 2.6.8.1 | |
| 257 | − | |
| 258 | − | |
| 259 | − | |
| 260 | −HDIO_SET_XFER | |
| 261 | − set transfer rate via proc | |
| 262 | − | |
| 263 | − | |
| 264 | − Not implemented, as of 2.6.8.1 | |
| 265 | − | |
| 266 | − | |
| 267 | − | |
| 268 | −HDIO_OBSOLETE_IDENTITY | |
| 269 | − OBSOLETE, DO NOT USE | |
| 270 | − | |
| 271 | − | |
| 272 | − Same as HDIO_GET_IDENTITY (see below), except that it only | |
| 273 | − returns the first 142 bytes of drive identity information. | |
| 274 | − | |
| 275 | − | |
| 276 | − | |
| 277 | −HDIO_GET_IDENTITY | |
| 278 | − get IDE identification info | |
| 279 | − | |
| 280 | − | |
| 281 | − usage:: | |
| 282 | − | |
| 283 | − unsigned char identity[512]; | |
| 284 | − | |
| 285 | − ioctl(fd, HDIO_GET_IDENTITY, identity); | |
| 286 | − | |
| 287 | − inputs: | |
| 288 | − none | |
| 289 | − | |
| 290 | − | |
| 291 | − | |
| 292 | − outputs: | |
| 293 | − ATA drive identity information. For full description, see | |
| 294 | − the IDENTIFY DEVICE and IDENTIFY PACKET DEVICE commands in | |
| 295 | − the ATA specification. | |
| 296 | − | |
| 297 | − error returns: | |
| 298 | − - EINVAL Called on a partition instead of the whole disk device | |
| 299 | − - ENOMSG IDENTIFY DEVICE information not available | |
| 300 | − | |
| 301 | − notes: | |
| 302 | − Returns information that was obtained when the drive was | |
| 303 | − probed. Some of this information is subject to change, and | |
| 304 | − this ioctl does not re-probe the drive to update the | |
| 305 | − information. | |
| 306 | − | |
| 307 | − This information is also available from /proc/ide/hdX/identify | |
| 308 | − | |
| 309 | − | |
| 310 | − | |
| 311 | −HDIO_GET_KEEPSETTINGS | |
| 312 | − get keep-settings-on-reset flag | |
| 313 | − | |
| 314 | − | |
| 315 | − usage:: | |
| 316 | − | |
| 317 | − long val; | |
| 318 | − | |
| 319 | − ioctl(fd, HDIO_GET_KEEPSETTINGS, &val); | |
| 320 | − | |
| 321 | − inputs: | |
| 322 | − none | |
| 323 | − | |
| 324 | − | |
| 325 | − | |
| 326 | − outputs: | |
| 327 | − The value of the current "keep settings" flag | |
| 328 | − | |
| 329 | − | |
| 330 | − | |
| 331 | − notes: | |
| 332 | − When set, indicates that kernel should restore settings | |
| 333 | − after a drive reset. | |
| 334 | − | |
| 335 | − | |
| 336 | − | |
| 337 | −HDIO_SET_KEEPSETTINGS | |
| 338 | − keep ioctl settings on reset | |
| 339 | − | |
| 340 | − | |
| 341 | − usage:: | |
| 342 | − | |
| 343 | − long val; | |
| 344 | − | |
| 345 | − ioctl(fd, HDIO_SET_KEEPSETTINGS, val); | |
| 346 | − | |
| 347 | − inputs: | |
| 348 | − New value for keep_settings flag | |
| 349 | − | |
| 350 | − | |
| 351 | − | |
| 352 | − outputs: | |
| 353 | − none | |
| 354 | − | |
| 355 | − | |
| 356 | − | |
| 357 | − error return: | |
| 358 | − - EINVAL Called on a partition instead of the whole disk device | |
| 359 | − - EACCES Access denied: requires CAP_SYS_ADMIN | |
| 360 | − - EINVAL value out of range [0 1] | |
| 361 | − - EBUSY Controller busy | |
| 362 | − | |
| 363 | − | |
| 364 | − | |
| 365 | −HDIO_GET_32BIT | |
| 366 | − get current io_32bit setting | |
| 367 | − | |
| 368 | − | |
| 369 | − usage:: | |
| 370 | − | |
| 371 | − long val; | |
| 372 | − | |
| 373 | − ioctl(fd, HDIO_GET_32BIT, &val); | |
| 374 | − | |
| 375 | − inputs: | |
| 376 | − none | |
| 377 | − | |
| 378 | − | |
| 379 | − | |
| 380 | − outputs: | |
| 381 | − The value of the current io_32bit setting | |
| 382 | − | |
| 383 | − | |
| 384 | − | |
| 385 | − notes: | |
| 386 | − 0=16-bit, 1=32-bit, 2,3 = 32bit+sync | |
| 387 | − | |
| 388 | − | |
| 389 | − | |
| 390 | − | |
| 391 | − | |
| 392 | −HDIO_GET_NOWERR | |
| 393 | − get ignore-write-error flag | |
| 394 | − | |
| 395 | − | |
| 396 | − usage:: | |
| 397 | − | |
| 398 | − long val; | |
| 399 | − | |
| 400 | − ioctl(fd, HDIO_GET_NOWERR, &val); | |
| 401 | − | |
| 402 | − inputs: | |
| 403 | − none | |
| 404 | − | |
| 405 | − | |
| 406 | − | |
| 407 | − outputs: | |
| 408 | − The value of the current ignore-write-error flag | |
| 409 | − | |
| 410 | − | |
| 411 | − | |
| 412 | − | |
| 413 | − | |
| 414 | −HDIO_GET_DMA | |
| 415 | − get use-dma flag | |
| 416 | − | |
| 417 | − | |
| 418 | − usage:: | |
| 419 | − | |
| 420 | − long val; | |
| 421 | − | |
| 422 | − ioctl(fd, HDIO_GET_DMA, &val); | |
| 423 | − | |
| 424 | − inputs: | |
| 425 | − none | |
| 426 | − | |
| 427 | − | |
| 428 | − | |
| 429 | − outputs: | |
| 430 | − The value of the current use-dma flag | |
| 431 | − | |
| 432 | − | |
| 433 | − | |
| 434 | − | |
| 435 | − | |
| 436 | −HDIO_GET_NICE | |
| 437 | − get nice flags | |
| 438 | − | |
| 439 | − | |
| 440 | − usage:: | |
| 441 | − | |
| 442 | − long nice; | |
| 443 | − | |
| 444 | − ioctl(fd, HDIO_GET_NICE, &nice); | |
| 445 | − | |
| 446 | − inputs: | |
| 447 | − none | |
| 448 | − | |
| 449 | − | |
| 450 | − | |
| 451 | − outputs: | |
| 452 | − The drive's "nice" values. | |
| 453 | − | |
| 454 | − | |
| 455 | − | |
| 456 | − notes: | |
| 457 | − Per-drive flags which determine when the system will give more | |
| 458 | − bandwidth to other devices sharing the same IDE bus. | |
| 459 | − | |
| 460 | − See <linux/hdreg.h>, near symbol IDE_NICE_DSC_OVERLAP. | |
| 461 | − | |
| 462 | − | |
| 463 | − | |
| 464 | − | |
| 465 | −HDIO_SET_NICE | |
| 466 | − set nice flags | |
| 467 | − | |
| 468 | − | |
| 469 | − usage:: | |
| 470 | − | |
| 471 | − unsigned long nice; | |
| 472 | − | |
| 473 | − ... | |
| 474 | − ioctl(fd, HDIO_SET_NICE, nice); | |
| 475 | − | |
| 476 | − inputs: | |
| 477 | − bitmask of nice flags. | |
| 478 | − | |
| 479 | − | |
| 480 | − | |
| 481 | − outputs: | |
| 482 | − none | |
| 483 | − | |
| 484 | − | |
| 485 | − | |
| 486 | − error returns: | |
| 487 | − - EACCES Access denied: requires CAP_SYS_ADMIN | |
| 488 | − - EPERM Flags other than DSC_OVERLAP and NICE_1 set. | |
| 489 | − - EPERM DSC_OVERLAP specified but not supported by drive | |
| 490 | − | |
| 491 | − notes: | |
| 492 | − This ioctl sets the DSC_OVERLAP and NICE_1 flags from values | |
| 493 | − provided by the user. | |
| 494 | − | |
| 495 | − Nice flags are listed in <linux/hdreg.h>, starting with | |
| 496 | − IDE_NICE_DSC_OVERLAP. These values represent shifts. | |
| 497 | − | |
| 498 | − | |
| 499 | − | |
| 500 | − | |
| 501 | − | |
| 502 | −HDIO_GET_WCACHE | |
| 503 | − get write cache mode on|off | |
| 504 | − | |
| 505 | − | |
| 506 | − usage:: | |
| 507 | − | |
| 508 | − long val; | |
| 509 | − | |
| 510 | − ioctl(fd, HDIO_GET_WCACHE, &val); | |
| 511 | − | |
| 512 | − inputs: | |
| 513 | − none | |
| 514 | − | |
| 515 | − | |
| 516 | − | |
| 517 | − outputs: | |
| 518 | − The value of the current write cache mode | |
| 519 | − | |
| 520 | − | |
| 521 | − | |
| 522 | − | |
| 523 | − | |
| 524 | −HDIO_GET_ACOUSTIC | |
| 525 | − get acoustic value | |
| 526 | − | |
| 527 | − | |
| 528 | − usage:: | |
| 529 | − | |
| 530 | − long val; | |
| 531 | − | |
| 532 | − ioctl(fd, HDIO_GET_ACOUSTIC, &val); | |
| 533 | − | |
| 534 | − inputs: | |
| 535 | − none | |
| 536 | − | |
| 537 | − | |
| 538 | − | |
| 539 | − outputs: | |
| 540 | − The value of the current acoustic settings | |
| 541 | − | |
| 542 | − | |
| 543 | − | |
| 544 | − notes: | |
| 545 | − See HDIO_SET_ACOUSTIC | |
| 546 | − | |
| 547 | − | |
| 548 | − | |
| 549 | − | |
| 550 | − | |
| 551 | −HDIO_GET_ADDRESS | |
| 552 | − usage:: | |
| 553 | − | |
| 554 | − | |
| 555 | − long val; | |
| 556 | − | |
| 557 | − ioctl(fd, HDIO_GET_ADDRESS, &val); | |
| 558 | − | |
| 559 | − inputs: | |
| 560 | − none | |
| 561 | − | |
| 562 | − | |
| 563 | − | |
| 564 | − outputs: | |
| 565 | − The value of the current addressing mode: | |
| 566 | − | |
| 567 | − = =================== | |
| 568 | − 0 28-bit | |
| 569 | − 1 48-bit | |
| 570 | − 2 48-bit doing 28-bit | |
| 571 | − 3 64-bit | |
| 572 | − = =================== | |
| 573 | − | |
| 574 | − | |
| 575 | − | |
| 576 | −HDIO_GET_BUSSTATE | |
| 577 | − get the bus state of the hwif | |
| 578 | − | |
| 579 | − | |
| 580 | − usage:: | |
| 581 | − | |
| 582 | − long state; | |
| 583 | − | |
| 584 | − ioctl(fd, HDIO_SCAN_HWIF, &state); | |
| 585 | − | |
| 586 | − inputs: | |
| 587 | − none | |
| 588 | − | |
| 589 | − | |
| 590 | − | |
| 591 | − outputs: | |
| 592 | − Current power state of the IDE bus. One of BUSSTATE_OFF, | |
| 593 | − BUSSTATE_ON, or BUSSTATE_TRISTATE | |
| 594 | − | |
| 595 | − error returns: | |
| 596 | − - EACCES Access denied: requires CAP_SYS_ADMIN | |
| 597 | − | |
| 598 | − | |
| 599 | − | |
| 600 | − | |
| 601 | −HDIO_SET_BUSSTATE | |
| 602 | − set the bus state of the hwif | |
| 107 | +HDIO_GET_IDENTITY | |
| 108 | + get IDE identification info | |
| 603 | 109 | |
| 604 | 110 | |
| 605 | 111 | usage:: |
| 606 | 112 | |
| 607 | − int state; | |
| 113 | + unsigned char identity[512]; | |
| 608 | 114 | |
| 609 | − ... | |
| 610 | − ioctl(fd, HDIO_SCAN_HWIF, state); | |
| 115 | + ioctl(fd, HDIO_GET_IDENTITY, identity); | |
| 611 | 116 | |
| 612 | 117 | inputs: |
| 613 | − Desired IDE power state. One of BUSSTATE_OFF, BUSSTATE_ON, | |
| 614 | − or BUSSTATE_TRISTATE | |
| 615 | − | |
| 616 | − outputs: | |
| 617 | 118 | none |
| 618 | 119 | |
| 619 | 120 | |
| 620 | 121 | |
| 621 | − error returns: | |
| 622 | − - EACCES Access denied: requires CAP_SYS_RAWIO | |
| 623 | − - EOPNOTSUPP Hardware interface does not support bus power control | |
| 624 | − | |
| 625 | − | |
| 626 | − | |
| 122 | + outputs: | |
| 123 | + ATA drive identity information. For full description, see | |
| 124 | + the IDENTIFY DEVICE and IDENTIFY PACKET DEVICE commands in | |
| 125 | + the ATA specification. | |
| 627 | 126 | |
| 628 | −HDIO_TRISTATE_HWIF | |
| 629 | − execute a channel tristate | |
| 127 | + error returns: | |
| 128 | + - EINVAL Called on a partition instead of the whole disk device | |
| 129 | + - ENOMSG IDENTIFY DEVICE information not available | |
| 630 | 130 | |
| 131 | + notes: | |
| 132 | + Returns information that was obtained when the drive was | |
| 133 | + probed. Some of this information is subject to change, and | |
| 134 | + this ioctl does not re-probe the drive to update the | |
| 135 | + information. | |
| 631 | 136 | |
| 632 | − Not implemented, as of 2.6.8.1. See HDIO_SET_BUSSTATE | |
| 137 | + This information is also available from /proc/ide/hdX/identify | |
| 633 | 138 | |
| 634 | 139 | |
| 635 | 140 | |
| 636 | −HDIO_DRIVE_RESET | |
| 637 | − execute a device reset | |
| 141 | +HDIO_GET_32BIT | |
| 142 | + get current io_32bit setting | |
| 638 | 143 | |
| 639 | 144 | |
| 640 | 145 | usage:: |
| 641 | 146 | |
| 642 | − int args[3] | |
| 147 | + long val; | |
| 643 | 148 | |
| 644 | − ... | |
| 645 | − ioctl(fd, HDIO_DRIVE_RESET, args); | |
| 149 | + ioctl(fd, HDIO_GET_32BIT, &val); | |
| 646 | 150 | |
| 647 | 151 | inputs: |
| 648 | 152 | none |
| @@ -650,22 +154,12 @@ HDIO_DRIVE_RESET · 1 unmodified line | ||
| 650 | 154 | |
| 651 | 155 | |
| 652 | 156 | outputs: |
| 653 | − none | |
| 654 | − | |
| 157 | + The value of the current io_32bit setting | |
| 655 | 158 | |
| 656 | 159 | |
| 657 | − error returns: | |
| 658 | − - EACCES Access denied: requires CAP_SYS_ADMIN | |
| 659 | − - ENXIO No such device: phy dead or ctl_addr == 0 | |
| 660 | − - EIO I/O error: reset timed out or hardware error | |
| 661 | 160 | |
| 662 | 161 | notes: |
| 663 | − | |
| 664 | − - Execute a reset on the device as soon as the current IO | |
| 665 | − operation has completed. | |
| 666 | − | |
| 667 | − - Executes an ATAPI soft reset if applicable, otherwise | |
| 668 | − executes an ATA soft reset on the controller. | |
| 162 | + 0=16-bit, 1=32-bit, 2,3 = 32bit+sync | |
| 669 | 163 | |
| 670 | 164 | |
| 671 | 165 | |
| @@ -1026,14 +520,6 @@ HDIO_DRIVE_TASK · 354 unmodified lines | ||
| 1026 | 520 | |
| 1027 | 521 | |
| 1028 | 522 | |
| 1029 | −HDIO_DRIVE_CMD_AEB | |
| 1030 | − HDIO_DRIVE_TASK | |
| 1031 | − | |
| 1032 | − | |
| 1033 | − Not implemented, as of 2.6.8.1 | |
| 1034 | − | |
| 1035 | − | |
| 1036 | − | |
| 1037 | 523 | HDIO_SET_32BIT |
| 1038 | 524 | change io_32bit flags |
| 1039 | 525 | |
| @@ -1059,284 +545,3 @@ HDIO_SET_32BIT · 19 unmodified lines | ||
| 1059 | 545 | - EACCES Access denied: requires CAP_SYS_ADMIN |
| 1060 | 546 | - EINVAL value out of range [0 3] |
| 1061 | 547 | - EBUSY Controller busy |
| 1062 | − | |
| 1063 | − | |
| 1064 | − | |
| 1065 | − | |
| 1066 | −HDIO_SET_NOWERR | |
| 1067 | − change ignore-write-error flag | |
| 1068 | − | |
| 1069 | − | |
| 1070 | − usage:: | |
| 1071 | − | |
| 1072 | − int val; | |
| 1073 | − | |
| 1074 | − ioctl(fd, HDIO_SET_NOWERR, val); | |
| 1075 | − | |
| 1076 | − inputs: | |
| 1077 | − New value for ignore-write-error flag. Used for ignoring | |
| 1078 | − | |
| 1079 | − | |
| 1080 | − WRERR_STAT | |
| 1081 | − | |
| 1082 | − outputs: | |
| 1083 | − none | |
| 1084 | − | |
| 1085 | − | |
| 1086 | − | |
| 1087 | − error return: | |
| 1088 | − - EINVAL Called on a partition instead of the whole disk device | |
| 1089 | − - EACCES Access denied: requires CAP_SYS_ADMIN | |
| 1090 | − - EINVAL value out of range [0 1] | |
| 1091 | − - EBUSY Controller busy | |
| 1092 | − | |
| 1093 | − | |
| 1094 | − | |
| 1095 | −HDIO_SET_DMA | |
| 1096 | − change use-dma flag | |
| 1097 | − | |
| 1098 | − | |
| 1099 | − usage:: | |
| 1100 | − | |
| 1101 | − long val; | |
| 1102 | − | |
| 1103 | − ioctl(fd, HDIO_SET_DMA, val); | |
| 1104 | − | |
| 1105 | − inputs: | |
| 1106 | − New value for use-dma flag | |
| 1107 | − | |
| 1108 | − | |
| 1109 | − | |
| 1110 | − outputs: | |
| 1111 | − none | |
| 1112 | − | |
| 1113 | − | |
| 1114 | − | |
| 1115 | − error return: | |
| 1116 | − - EINVAL Called on a partition instead of the whole disk device | |
| 1117 | − - EACCES Access denied: requires CAP_SYS_ADMIN | |
| 1118 | − - EINVAL value out of range [0 1] | |
| 1119 | − - EBUSY Controller busy | |
| 1120 | − | |
| 1121 | − | |
| 1122 | − | |
| 1123 | −HDIO_SET_PIO_MODE | |
| 1124 | − reconfig interface to new speed | |
| 1125 | − | |
| 1126 | − | |
| 1127 | − usage:: | |
| 1128 | − | |
| 1129 | − long val; | |
| 1130 | − | |
| 1131 | − ioctl(fd, HDIO_SET_PIO_MODE, val); | |
| 1132 | − | |
| 1133 | − inputs: | |
| 1134 | − New interface speed. | |
| 1135 | − | |
| 1136 | − | |
| 1137 | − | |
| 1138 | − outputs: | |
| 1139 | − none | |
| 1140 | − | |
| 1141 | − | |
| 1142 | − | |
| 1143 | − error return: | |
| 1144 | − - EINVAL Called on a partition instead of the whole disk device | |
| 1145 | − - EACCES Access denied: requires CAP_SYS_ADMIN | |
| 1146 | − - EINVAL value out of range [0 255] | |
| 1147 | − - EBUSY Controller busy | |
| 1148 | − | |
| 1149 | − | |
| 1150 | − | |
| 1151 | −HDIO_SCAN_HWIF | |
| 1152 | − register and (re)scan interface | |
| 1153 | − | |
| 1154 | − | |
| 1155 | − usage:: | |
| 1156 | − | |
| 1157 | − int args[3] | |
| 1158 | − | |
| 1159 | − ... | |
| 1160 | − ioctl(fd, HDIO_SCAN_HWIF, args); | |
| 1161 | − | |
| 1162 | − inputs: | |
| 1163 | − | |
| 1164 | − ======= ========================= | |
| 1165 | − args[0] io address to probe | |
| 1166 | − | |
| 1167 | − | |
| 1168 | − args[1] control address to probe | |
| 1169 | − args[2] irq number | |
| 1170 | − ======= ========================= | |
| 1171 | − | |
| 1172 | − outputs: | |
| 1173 | − none | |
| 1174 | − | |
| 1175 | − | |
| 1176 | − | |
| 1177 | − error returns: | |
| 1178 | − - EACCES Access denied: requires CAP_SYS_RAWIO | |
| 1179 | − - EIO Probe failed. | |
| 1180 | − | |
| 1181 | − notes: | |
| 1182 | − This ioctl initializes the addresses and irq for a disk | |
| 1183 | − controller, probes for drives, and creates /proc/ide | |
| 1184 | − interfaces as appropriate. | |
| 1185 | − | |
| 1186 | − | |
| 1187 | − | |
| 1188 | −HDIO_UNREGISTER_HWIF | |
| 1189 | − unregister interface | |
| 1190 | − | |
| 1191 | − | |
| 1192 | − usage:: | |
| 1193 | − | |
| 1194 | − int index; | |
| 1195 | − | |
| 1196 | − ioctl(fd, HDIO_UNREGISTER_HWIF, index); | |
| 1197 | − | |
| 1198 | − inputs: | |
| 1199 | − index index of hardware interface to unregister | |
| 1200 | − | |
| 1201 | − | |
| 1202 | − | |
| 1203 | − outputs: | |
| 1204 | − none | |
| 1205 | − | |
| 1206 | − | |
| 1207 | − | |
| 1208 | − error returns: | |
| 1209 | − - EACCES Access denied: requires CAP_SYS_RAWIO | |
| 1210 | − | |
| 1211 | − notes: | |
| 1212 | − This ioctl removes a hardware interface from the kernel. | |
| 1213 | − | |
| 1214 | − Currently (2.6.8) this ioctl silently fails if any drive on | |
| 1215 | − the interface is busy. | |
| 1216 | − | |
| 1217 | − | |
| 1218 | − | |
| 1219 | −HDIO_SET_WCACHE | |
| 1220 | − change write cache enable-disable | |
| 1221 | − | |
| 1222 | − | |
| 1223 | − usage:: | |
| 1224 | − | |
| 1225 | − int val; | |
| 1226 | − | |
| 1227 | − ioctl(fd, HDIO_SET_WCACHE, val); | |
| 1228 | − | |
| 1229 | − inputs: | |
| 1230 | − New value for write cache enable | |
| 1231 | − | |
| 1232 | − | |
| 1233 | − | |
| 1234 | − outputs: | |
| 1235 | − none | |
| 1236 | − | |
| 1237 | − | |
| 1238 | − | |
| 1239 | − error return: | |
| 1240 | − - EINVAL Called on a partition instead of the whole disk device | |
| 1241 | − - EACCES Access denied: requires CAP_SYS_ADMIN | |
| 1242 | − - EINVAL value out of range [0 1] | |
| 1243 | − - EBUSY Controller busy | |
| 1244 | − | |
| 1245 | − | |
| 1246 | − | |
| 1247 | −HDIO_SET_ACOUSTIC | |
| 1248 | − change acoustic behavior | |
| 1249 | − | |
| 1250 | − | |
| 1251 | − usage:: | |
| 1252 | − | |
| 1253 | − int val; | |
| 1254 | − | |
| 1255 | − ioctl(fd, HDIO_SET_ACOUSTIC, val); | |
| 1256 | − | |
| 1257 | − inputs: | |
| 1258 | − New value for drive acoustic settings | |
| 1259 | − | |
| 1260 | − | |
| 1261 | − | |
| 1262 | − outputs: | |
| 1263 | − none | |
| 1264 | − | |
| 1265 | − | |
| 1266 | − | |
| 1267 | − error return: | |
| 1268 | − - EINVAL Called on a partition instead of the whole disk device | |
| 1269 | − - EACCES Access denied: requires CAP_SYS_ADMIN | |
| 1270 | − - EINVAL value out of range [0 254] | |
| 1271 | − - EBUSY Controller busy | |
| 1272 | − | |
| 1273 | − | |
| 1274 | − | |
| 1275 | −HDIO_SET_QDMA | |
| 1276 | − change use-qdma flag | |
| 1277 | − | |
| 1278 | − | |
| 1279 | − Not implemented, as of 2.6.8.1 | |
| 1280 | − | |
| 1281 | − | |
| 1282 | − | |
| 1283 | −HDIO_SET_ADDRESS | |
| 1284 | − change lba addressing modes | |
| 1285 | − | |
| 1286 | − | |
| 1287 | − usage:: | |
| 1288 | − | |
| 1289 | − int val; | |
| 1290 | − | |
| 1291 | − ioctl(fd, HDIO_SET_ADDRESS, val); | |
| 1292 | − | |
| 1293 | − inputs: | |
| 1294 | − New value for addressing mode | |
| 1295 | − | |
| 1296 | − = =================== | |
| 1297 | − 0 28-bit | |
| 1298 | − 1 48-bit | |
| 1299 | − 2 48-bit doing 28-bit | |
| 1300 | − = =================== | |
| 1301 | − | |
| 1302 | − outputs: | |
| 1303 | − none | |
| 1304 | − | |
| 1305 | − | |
| 1306 | − | |
| 1307 | − error return: | |
| 1308 | − - EINVAL Called on a partition instead of the whole disk device | |
| 1309 | − - EACCES Access denied: requires CAP_SYS_ADMIN | |
| 1310 | − - EINVAL value out of range [0 2] | |
| 1311 | − - EBUSY Controller busy | |
| 1312 | − - EIO Drive does not support lba48 mode. | |
| 1313 | − | |
| 1314 | − | |
| 1315 | −HDIO_SET_IDE_SCSI | |
| 1316 | − usage:: | |
| 1317 | − | |
| 1318 | − | |
| 1319 | − long val; | |
| 1320 | − | |
| 1321 | − ioctl(fd, HDIO_SET_IDE_SCSI, val); | |
| 1322 | − | |
| 1323 | − inputs: | |
| 1324 | − New value for scsi emulation mode (?) | |
| 1325 | − | |
| 1326 | − | |
| 1327 | − | |
| 1328 | − outputs: | |
| 1329 | − none | |
| 1330 | − | |
| 1331 | − | |
| 1332 | − | |
| 1333 | − error return: | |
| 1334 | − - EINVAL Called on a partition instead of the whole disk device | |
| 1335 | − - EACCES Access denied: requires CAP_SYS_ADMIN | |
| 1336 | − - EINVAL value out of range [0 1] | |
| 1337 | − - EBUSY Controller busy | |
| 1338 | − | |
| 1339 | − | |
| 1340 | − | |
| 1341 | −HDIO_SET_SCSI_IDE | |
| 1342 | − Not implemented, as of 2.6.8.1 | |