Add devicetree binding for SPI devices.
Unified · Split
| @@ -0,0 +1,57 @@ | |||
| 1 | Synaptics RMI4 SPI Device Binding | ||
| 2 | |||
| 3 | The Synaptics RMI4 core is able to support RMI4 devices using different | ||
| 4 | transports and different functions. This file describes the device tree | ||
| 5 | bindings for devices using the SPI transport driver. Complete documentation | ||
| 6 | for other transports and functions can be found in | ||
| 7 | Documentation/devicetree/bindings/input/rmi4. | ||
| 8 | |||
| 9 | Required Properties: | ||
| 10 | - compatible: syna,rmi4-spi | ||
| 11 | - reg: Chip select address for the device | ||
| 12 | - #address-cells: Set to 1 to indicate that the function child nodes | ||
| 13 | consist of only on uint32 value. | ||
| 14 | - #size-cells: Set to 0 to indicate that the function child nodes do not | ||
| 15 | have a size property. | ||
| 16 | |||
| 17 | Optional Properties: | ||
| 18 | - interrupts: interrupt which the rmi device is connected to. | ||
| 19 | - interrupt-parent: The interrupt controller. | ||
| 20 | See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt | ||
| 21 | |||
| 22 | - spi-rx-delay-us: microsecond delay after a read transfer. | ||
| 23 | - spi-tx-delay-us: microsecond delay after a write transfer. | ||
| 24 | |||
| 25 | Function Parameters: | ||
| 26 | Parameters specific to RMI functions are contained in child nodes of the rmi device | ||
| 27 | node. Documentation for the parameters of each function can be found in: | ||
| 28 | Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt. | ||
| 29 | |||
| 30 | |||
| 31 | |||
| 32 | Example: | ||
| 33 | spi@7000d800 { | ||
| 34 | rmi4-spi-dev@0 { | ||
| 35 | compatible = "syna,rmi4-spi"; | ||
| 36 | reg = <0x0>; | ||
| 37 | #address-cells = <1>; | ||
| 38 | #size-cells = <0>; | ||
| 39 | spi-max-frequency = <4000000>; | ||
| 40 | spi-cpha; | ||
| 41 | spi-cpol; | ||
| 42 | interrupt-parent = <&gpio>; | ||
| 43 | interrupts = <TEGRA_GPIO(K, 2) 0x2>; | ||
| 44 | spi-rx-delay-us = <30>; | ||
| 45 | |||
| 46 | rmi4-f01@1 { | ||
| 47 | reg = <0x1>; | ||
| 48 | syna,nosleep-mode = <1>; | ||
| 49 | }; | ||
| 50 | |||
| 51 | rmi4-f11@11 { | ||
| 52 | reg = <0x11>; | ||
| 53 | touchscreen-inverted-y; | ||
| 54 | syna,sensor-type = <2>; | ||
| 55 | }; | ||
| 56 | }; | ||
| 57 | }; | ||
| @@ -61,6 +61,8 @@ contain the following properties. · 60 unmodified lines | |||
| 61 | used for MOSI. Defaults to 1 if not present. | 61 | used for MOSI. Defaults to 1 if not present. |
| 62 | - spi-rx-bus-width - (optional) The bus width(number of data wires) that | 62 | - spi-rx-bus-width - (optional) The bus width(number of data wires) that |
| 63 | used for MISO. Defaults to 1 if not present. | 63 | used for MISO. Defaults to 1 if not present. |
| 64 | - spi-rx-delay-us - (optional) Microsecond delay after a read transfer. | ||
| 65 | - spi-tx-delay-us - (optional) Microsecond delay after a write transfer. | ||
| 64 | 66 | ||
| 65 | Some SPI controllers and devices support Dual and Quad SPI transfer mode. | 67 | Some SPI controllers and devices support Dual and Quad SPI transfer mode. |
| 66 | It allows data in the SPI system to be transferred in 2 wires(DUAL) or 4 wires(QUAD). | 68 | It allows data in the SPI system to be transferred in 2 wires(DUAL) or 4 wires(QUAD). |
| @@ -13,6 +13,7 @@ · 12 unmodified lines | |||
| 13 | #include <linux/slab.h> | 13 | #include <linux/slab.h> |
| 14 | #include <linux/spi/spi.h> | 14 | #include <linux/spi/spi.h> |
| 15 | #include <linux/irq.h> | 15 | #include <linux/irq.h> |
| 16 | #include <linux/of.h> | ||
| 16 | #include "rmi_driver.h" | 17 | #include "rmi_driver.h" |
| 17 | 18 | ||
| 18 | #define RMI_SPI_DEFAULT_XFER_BUF_SIZE 64 | 19 | #define RMI_SPI_DEFAULT_XFER_BUF_SIZE 64 |
| @@ -360,6 +361,41 @@ static int rmi_spi_init_irq(struct spi_device *spi) · 341 unmodified lines | |||
| 360 | return 0; | 361 | return 0; |
| 361 | } | 362 | } |
| 362 | 363 | ||
| 364 | #ifdef CONFIG_OF | ||
| 365 | static int rmi_spi_of_probe(struct spi_device *spi, | ||
| 366 | struct rmi_device_platform_data *pdata) | ||
| 367 | { | ||
| 368 | struct device *dev = &spi->dev; | ||
| 369 | int retval; | ||
| 370 | |||
| 371 | retval = rmi_of_property_read_u32(dev, | ||
| 372 | &pdata->spi_data.read_delay_us, | ||
| 373 | "spi-rx-delay-us", 1); | ||
| 374 | if (retval) | ||
| 375 | return retval; | ||
| 376 | |||
| 377 | retval = rmi_of_property_read_u32(dev, | ||
| 378 | &pdata->spi_data.write_delay_us, | ||
| 379 | "spi-tx-delay-us", 1); | ||
| 380 | if (retval) | ||
| 381 | return retval; | ||
| 382 | |||
| 383 | return 0; | ||
| 384 | } | ||
| 385 | |||
| 386 | static const struct of_device_id rmi_spi_of_match[] = { | ||
| 387 | { .compatible = "syna,rmi4-spi" }, | ||
| 388 | {}, | ||
| 389 | }; | ||
| 390 | MODULE_DEVICE_TABLE(of, rmi_spi_of_match); | ||
| 391 | #else | ||
| 392 | static inline int rmi_spi_of_probe(struct spi_device *spi, | ||
| 393 | struct rmi_device_platform_data *pdata) | ||
| 394 | { | ||
| 395 | return -ENODEV; | ||
| 396 | } | ||
| 397 | #endif | ||
| 398 | |||
| 363 | static int rmi_spi_probe(struct spi_device *spi) | 399 | static int rmi_spi_probe(struct spi_device *spi) |
| 364 | { | 400 | { |
| 365 | struct rmi_spi_xport *rmi_spi; | 401 | struct rmi_spi_xport *rmi_spi; |
| @@ -377,8 +413,13 @@ static int rmi_spi_probe(struct spi_device *spi) · 11 unmodified lines | |||
| 377 | 413 | ||
| 378 | pdata = &rmi_spi->xport.pdata; | 414 | pdata = &rmi_spi->xport.pdata; |
| 379 | 415 | ||
| 380 | if (spi_pdata) | 416 | if (spi->dev.of_node) { |
| 417 | retval = rmi_spi_of_probe(spi, pdata); | ||
| 418 | if (retval) | ||
| 419 | return retval; | ||
| 420 | } else if (spi_pdata) { | ||
| 381 | *pdata = *spi_pdata; | 421 | *pdata = *spi_pdata; |
| 422 | } | ||
| 382 | 423 | ||
| 383 | if (pdata->spi_data.bits_per_word) | 424 | if (pdata->spi_data.bits_per_word) |
| 384 | spi->bits_per_word = pdata->spi_data.bits_per_word; | 425 | spi->bits_per_word = pdata->spi_data.bits_per_word; |
| @@ -532,6 +573,7 @@ static struct spi_driver rmi_spi_driver = { · 147 unmodified lines | |||
| 532 | .driver = { | 573 | .driver = { |
| 533 | .name = "rmi4_spi", | 574 | .name = "rmi4_spi", |
| 534 | .pm = &rmi_spi_pm, | 575 | .pm = &rmi_spi_pm, |
| 576 | .of_match_table = of_match_ptr(rmi_spi_of_match), | ||
| 535 | }, | 577 | }, |
| 536 | .id_table = rmi_id, | 578 | .id_table = rmi_id, |
| 537 | .probe = rmi_spi_probe, | 579 | .probe = rmi_spi_probe, |