Fix problems in uapi definitions reported by Gabriel Laskar: (see https://lkml.org/lkml/2016/4/5/205 for details) - move public header file rio_mport_cdev.h to include/uapi/linux directory - change types in data structures passed as IOCTL parameters - improve parameter checking in some IOCTL service routines
Showing the changes to include/uapi (1 of 2 files). Show all
Unified · Split
| @@ -0,0 +1,277 @@ | ||
| 1 | +/* | |
| 2 | + * Copyright (c) 2015-2016, Integrated Device Technology Inc. | |
| 3 | + * Copyright (c) 2015, Prodrive Technologies | |
| 4 | + * Copyright (c) 2015, Texas Instruments Incorporated | |
| 5 | + * Copyright (c) 2015, RapidIO Trade Association | |
| 6 | + * All rights reserved. | |
| 7 | + * | |
| 8 | + * This software is available to you under a choice of one of two licenses. | |
| 9 | + * You may choose to be licensed under the terms of the GNU General Public | |
| 10 | + * License(GPL) Version 2, or the BSD-3 Clause license below: | |
| 11 | + * | |
| 12 | + * Redistribution and use in source and binary forms, with or without | |
| 13 | + * modification, are permitted provided that the following conditions are met: | |
| 14 | + * | |
| 15 | + * 1. Redistributions of source code must retain the above copyright notice, | |
| 16 | + * this list of conditions and the following disclaimer. | |
| 17 | + * | |
| 18 | + * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| 19 | + * this list of conditions and the following disclaimer in the documentation | |
| 20 | + * and/or other materials provided with the distribution. | |
| 21 | + * | |
| 22 | + * 3. Neither the name of the copyright holder nor the names of its contributors | |
| 23 | + * may be used to endorse or promote products derived from this software without | |
| 24 | + * specific prior written permission. | |
| 25 | + * | |
| 26 | + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| 27 | + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, | |
| 28 | + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR | |
| 29 | + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR | |
| 30 | + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, | |
| 31 | + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, | |
| 32 | + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; | |
| 33 | + * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, | |
| 34 | + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR | |
| 35 | + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF | |
| 36 | + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| 37 | + */ | |
| 38 | + | |
| 39 | +#ifndef _RIO_MPORT_CDEV_H_ | |
| 40 | +#define _RIO_MPORT_CDEV_H_ | |
| 41 | + | |
| 42 | +#include <linux/ioctl.h> | |
| 43 | +#include <linux/types.h> | |
| 44 | + | |
| 45 | +struct rio_mport_maint_io { | |
| 46 | + __u16 rioid; /* destID of remote device */ | |
| 47 | + __u8 hopcount; /* hopcount to remote device */ | |
| 48 | + __u8 pad0[5]; | |
| 49 | + __u32 offset; /* offset in register space */ | |
| 50 | + __u32 length; /* length in bytes */ | |
| 51 | + __u64 buffer; /* pointer to data buffer */ | |
| 52 | +}; | |
| 53 | + | |
| 54 | +/* | |
| 55 | + * Definitions for RapidIO data transfers: | |
| 56 | + * - memory mapped (MAPPED) | |
| 57 | + * - packet generation from memory (TRANSFER) | |
| 58 | + */ | |
| 59 | +#define RIO_TRANSFER_MODE_MAPPED (1 << 0) | |
| 60 | +#define RIO_TRANSFER_MODE_TRANSFER (1 << 1) | |
| 61 | +#define RIO_CAP_DBL_SEND (1 << 2) | |
| 62 | +#define RIO_CAP_DBL_RECV (1 << 3) | |
| 63 | +#define RIO_CAP_PW_SEND (1 << 4) | |
| 64 | +#define RIO_CAP_PW_RECV (1 << 5) | |
| 65 | +#define RIO_CAP_MAP_OUTB (1 << 6) | |
| 66 | +#define RIO_CAP_MAP_INB (1 << 7) | |
| 67 | + | |
| 68 | +struct rio_mport_properties { | |
| 69 | + __u16 hdid; | |
| 70 | + __u8 id; /* Physical port ID */ | |
| 71 | + __u8 index; | |
| 72 | + __u32 flags; | |
| 73 | + __u32 sys_size; /* Default addressing size */ | |
| 74 | + __u8 port_ok; | |
| 75 | + __u8 link_speed; | |
| 76 | + __u8 link_width; | |
| 77 | + __u8 pad0; | |
| 78 | + __u32 dma_max_sge; | |
| 79 | + __u32 dma_max_size; | |
| 80 | + __u32 dma_align; | |
| 81 | + __u32 transfer_mode; /* Default transfer mode */ | |
| 82 | + __u32 cap_sys_size; /* Capable system sizes */ | |
| 83 | + __u32 cap_addr_size; /* Capable addressing sizes */ | |
| 84 | + __u32 cap_transfer_mode; /* Capable transfer modes */ | |
| 85 | + __u32 cap_mport; /* Mport capabilities */ | |
| 86 | +}; | |
| 87 | + | |
| 88 | +/* | |
| 89 | + * Definitions for RapidIO events; | |
| 90 | + * - incoming port-writes | |
| 91 | + * - incoming doorbells | |
| 92 | + */ | |
| 93 | +#define RIO_DOORBELL (1 << 0) | |
| 94 | +#define RIO_PORTWRITE (1 << 1) | |
| 95 | + | |
| 96 | +struct rio_doorbell { | |
| 97 | + __u16 rioid; | |
| 98 | + __u16 payload; | |
| 99 | +}; | |
| 100 | + | |
| 101 | +struct rio_doorbell_filter { | |
| 102 | + __u16 rioid; /* Use RIO_INVALID_DESTID to match all ids */ | |
| 103 | + __u16 low; | |
| 104 | + __u16 high; | |
| 105 | + __u16 pad0; | |
| 106 | +}; | |
| 107 | + | |
| 108 | + | |
| 109 | +struct rio_portwrite { | |
| 110 | + __u32 payload[16]; | |
| 111 | +}; | |
| 112 | + | |
| 113 | +struct rio_pw_filter { | |
| 114 | + __u32 mask; | |
| 115 | + __u32 low; | |
| 116 | + __u32 high; | |
| 117 | + __u32 pad0; | |
| 118 | +}; | |
| 119 | + | |
| 120 | +/* RapidIO base address for inbound requests set to value defined below | |
| 121 | + * indicates that no specific RIO-to-local address translation is requested | |
| 122 | + * and driver should use direct (one-to-one) address mapping. | |
| 123 | +*/ | |
| 124 | +#define RIO_MAP_ANY_ADDR (__u64)(~((__u64) 0)) | |
| 125 | + | |
| 126 | +struct rio_mmap { | |
| 127 | + __u16 rioid; | |
| 128 | + __u16 pad0[3]; | |
| 129 | + __u64 rio_addr; | |
| 130 | + __u64 length; | |
| 131 | + __u64 handle; | |
| 132 | + __u64 address; | |
| 133 | +}; | |
| 134 | + | |
| 135 | +struct rio_dma_mem { | |
| 136 | + __u64 length; /* length of DMA memory */ | |
| 137 | + __u64 dma_handle; /* handle associated with this memory */ | |
| 138 | + __u64 address; | |
| 139 | +}; | |
| 140 | + | |
| 141 | +struct rio_event { | |
| 142 | + __u32 header; /* event type RIO_DOORBELL or RIO_PORTWRITE */ | |
| 143 | + union { | |
| 144 | + struct rio_doorbell doorbell; /* header for RIO_DOORBELL */ | |
| 145 | + struct rio_portwrite portwrite; /* header for RIO_PORTWRITE */ | |
| 146 | + } u; | |
| 147 | + __u32 pad0; | |
| 148 | +}; | |
| 149 | + | |
| 150 | +enum rio_transfer_sync { | |
| 151 | + RIO_TRANSFER_SYNC, /* synchronous transfer */ | |
| 152 | + RIO_TRANSFER_ASYNC, /* asynchronous transfer */ | |
| 153 | + RIO_TRANSFER_FAF, /* fire-and-forget transfer */ | |
| 154 | +}; | |
| 155 | + | |
| 156 | +enum rio_transfer_dir { | |
| 157 | + RIO_TRANSFER_DIR_READ, /* Read operation */ | |
| 158 | + RIO_TRANSFER_DIR_WRITE, /* Write operation */ | |
| 159 | +}; | |
| 160 | + | |
| 161 | +/* | |
| 162 | + * RapidIO data exchange transactions are lists of individual transfers. Each | |
| 163 | + * transfer exchanges data between two RapidIO devices by remote direct memory | |
| 164 | + * access and has its own completion code. | |
| 165 | + * | |
| 166 | + * The RapidIO specification defines four types of data exchange requests: | |
| 167 | + * NREAD, NWRITE, SWRITE and NWRITE_R. The RapidIO DMA channel interface allows | |
| 168 | + * to specify the required type of write operation or combination of them when | |
| 169 | + * only the last data packet requires response. | |
| 170 | + * | |
| 171 | + * NREAD: read up to 256 bytes from remote device memory into local memory | |
| 172 | + * NWRITE: write up to 256 bytes from local memory to remote device memory | |
| 173 | + * without confirmation | |
| 174 | + * SWRITE: as NWRITE, but all addresses and payloads must be 64-bit aligned | |
| 175 | + * NWRITE_R: as NWRITE, but expect acknowledgment from remote device. | |
| 176 | + * | |
| 177 | + * The default exchange is chosen from NREAD and any of the WRITE modes as the | |
| 178 | + * driver sees fit. For write requests the user can explicitly choose between | |
| 179 | + * any of the write modes for each transaction. | |
| 180 | + */ | |
| 181 | +enum rio_exchange { | |
| 182 | + RIO_EXCHANGE_DEFAULT, /* Default method */ | |
| 183 | + RIO_EXCHANGE_NWRITE, /* All packets using NWRITE */ | |
| 184 | + RIO_EXCHANGE_SWRITE, /* All packets using SWRITE */ | |
| 185 | + RIO_EXCHANGE_NWRITE_R, /* Last packet NWRITE_R, others NWRITE */ | |
| 186 | + RIO_EXCHANGE_SWRITE_R, /* Last packet NWRITE_R, others SWRITE */ | |
| 187 | + RIO_EXCHANGE_NWRITE_R_ALL, /* All packets using NWRITE_R */ | |
| 188 | +}; | |
| 189 | + | |
| 190 | +struct rio_transfer_io { | |
| 191 | + __u64 rio_addr; /* Address in target's RIO mem space */ | |
| 192 | + __u64 loc_addr; | |
| 193 | + __u64 handle; | |
| 194 | + __u64 offset; /* Offset in buffer */ | |
| 195 | + __u64 length; /* Length in bytes */ | |
| 196 | + __u16 rioid; /* Target destID */ | |
| 197 | + __u16 method; /* Data exchange method, one of rio_exchange enum */ | |
| 198 | + __u32 completion_code; /* Completion code for this transfer */ | |
| 199 | +}; | |
| 200 | + | |
| 201 | +struct rio_transaction { | |
| 202 | + __u64 block; /* Pointer to array of <count> transfers */ | |
| 203 | + __u32 count; /* Number of transfers */ | |
| 204 | + __u32 transfer_mode; /* Data transfer mode */ | |
| 205 | + __u16 sync; /* Synch method, one of rio_transfer_sync enum */ | |
| 206 | + __u16 dir; /* Transfer direction, one of rio_transfer_dir enum */ | |
| 207 | + __u32 pad0; | |
| 208 | +}; | |
| 209 | + | |
| 210 | +struct rio_async_tx_wait { | |
| 211 | + __u32 token; /* DMA transaction ID token */ | |
| 212 | + __u32 timeout; /* Wait timeout in msec, if 0 use default TO */ | |
| 213 | +}; | |
| 214 | + | |
| 215 | +#define RIO_MAX_DEVNAME_SZ 20 | |
| 216 | + | |
| 217 | +struct rio_rdev_info { | |
| 218 | + __u16 destid; | |
| 219 | + __u8 hopcount; | |
| 220 | + __u8 pad0; | |
| 221 | + __u32 comptag; | |
| 222 | + char name[RIO_MAX_DEVNAME_SZ + 1]; | |
| 223 | +}; | |
| 224 | + | |
| 225 | +/* Driver IOCTL codes */ | |
| 226 | +#define RIO_MPORT_DRV_MAGIC 'm' | |
| 227 | + | |
| 228 | +#define RIO_MPORT_MAINT_HDID_SET \ | |
| 229 | + _IOW(RIO_MPORT_DRV_MAGIC, 1, __u16) | |
| 230 | +#define RIO_MPORT_MAINT_COMPTAG_SET \ | |
| 231 | + _IOW(RIO_MPORT_DRV_MAGIC, 2, __u32) | |
| 232 | +#define RIO_MPORT_MAINT_PORT_IDX_GET \ | |
| 233 | + _IOR(RIO_MPORT_DRV_MAGIC, 3, __u32) | |
| 234 | +#define RIO_MPORT_GET_PROPERTIES \ | |
| 235 | + _IOR(RIO_MPORT_DRV_MAGIC, 4, struct rio_mport_properties) | |
| 236 | +#define RIO_MPORT_MAINT_READ_LOCAL \ | |
| 237 | + _IOR(RIO_MPORT_DRV_MAGIC, 5, struct rio_mport_maint_io) | |
| 238 | +#define RIO_MPORT_MAINT_WRITE_LOCAL \ | |
| 239 | + _IOW(RIO_MPORT_DRV_MAGIC, 6, struct rio_mport_maint_io) | |
| 240 | +#define RIO_MPORT_MAINT_READ_REMOTE \ | |
| 241 | + _IOR(RIO_MPORT_DRV_MAGIC, 7, struct rio_mport_maint_io) | |
| 242 | +#define RIO_MPORT_MAINT_WRITE_REMOTE \ | |
| 243 | + _IOW(RIO_MPORT_DRV_MAGIC, 8, struct rio_mport_maint_io) | |
| 244 | +#define RIO_ENABLE_DOORBELL_RANGE \ | |
| 245 | + _IOW(RIO_MPORT_DRV_MAGIC, 9, struct rio_doorbell_filter) | |
| 246 | +#define RIO_DISABLE_DOORBELL_RANGE \ | |
| 247 | + _IOW(RIO_MPORT_DRV_MAGIC, 10, struct rio_doorbell_filter) | |
| 248 | +#define RIO_ENABLE_PORTWRITE_RANGE \ | |
| 249 | + _IOW(RIO_MPORT_DRV_MAGIC, 11, struct rio_pw_filter) | |
| 250 | +#define RIO_DISABLE_PORTWRITE_RANGE \ | |
| 251 | + _IOW(RIO_MPORT_DRV_MAGIC, 12, struct rio_pw_filter) | |
| 252 | +#define RIO_SET_EVENT_MASK \ | |
| 253 | + _IOW(RIO_MPORT_DRV_MAGIC, 13, __u32) | |
| 254 | +#define RIO_GET_EVENT_MASK \ | |
| 255 | + _IOR(RIO_MPORT_DRV_MAGIC, 14, __u32) | |
| 256 | +#define RIO_MAP_OUTBOUND \ | |
| 257 | + _IOWR(RIO_MPORT_DRV_MAGIC, 15, struct rio_mmap) | |
| 258 | +#define RIO_UNMAP_OUTBOUND \ | |
| 259 | + _IOW(RIO_MPORT_DRV_MAGIC, 16, struct rio_mmap) | |
| 260 | +#define RIO_MAP_INBOUND \ | |
| 261 | + _IOWR(RIO_MPORT_DRV_MAGIC, 17, struct rio_mmap) | |
| 262 | +#define RIO_UNMAP_INBOUND \ | |
| 263 | + _IOW(RIO_MPORT_DRV_MAGIC, 18, __u64) | |
| 264 | +#define RIO_ALLOC_DMA \ | |
| 265 | + _IOWR(RIO_MPORT_DRV_MAGIC, 19, struct rio_dma_mem) | |
| 266 | +#define RIO_FREE_DMA \ | |
| 267 | + _IOW(RIO_MPORT_DRV_MAGIC, 20, __u64) | |
| 268 | +#define RIO_TRANSFER \ | |
| 269 | + _IOWR(RIO_MPORT_DRV_MAGIC, 21, struct rio_transaction) | |
| 270 | +#define RIO_WAIT_FOR_ASYNC \ | |
| 271 | + _IOW(RIO_MPORT_DRV_MAGIC, 22, struct rio_async_tx_wait) | |
| 272 | +#define RIO_DEV_ADD \ | |
| 273 | + _IOW(RIO_MPORT_DRV_MAGIC, 23, struct rio_rdev_info) | |
| 274 | +#define RIO_DEV_DEL \ | |
| 275 | + _IOW(RIO_MPORT_DRV_MAGIC, 24, struct rio_rdev_info) | |
| 276 | + | |
| 277 | +#endif /* _RIO_MPORT_CDEV_H_ */ | |