| @@ -0,0 +1,482 @@ |
| | 1 | /* Copyright (c) 2010 Christoph Mair <christoph.mair@gmail.com> |
| | 2 | |
| | 3 | This driver supports the bmp085 digital barometric pressure |
| | 4 | and temperature sensor from Bosch Sensortec. The datasheet |
| | 5 | is avaliable from their website: |
| | 6 | http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf |
| | 7 | |
| | 8 | A pressure measurement is issued by reading from pressure0_input. |
| | 9 | The return value ranges from 30000 to 110000 pascal with a resulution |
| | 10 | of 1 pascal (0.01 millibar) which enables measurements from 9000m above |
| | 11 | to 500m below sea level. |
| | 12 | |
| | 13 | The temperature can be read from temp0_input. Values range from |
| | 14 | -400 to 850 representing the ambient temperature in degree celsius |
| | 15 | multiplied by 10.The resolution is 0.1 celsius. |
| | 16 | |
| | 17 | Because ambient pressure is temperature dependent, a temperature |
| | 18 | measurement will be executed automatically even if the user is reading |
| | 19 | from pressure0_input. This happens if the last temperature measurement |
| | 20 | has been executed more then one second ago. |
| | 21 | |
| | 22 | To decrease RMS noise from pressure measurements, the bmp085 can |
| | 23 | autonomously calculate the average of up to eight samples. This is |
| | 24 | set up by writing to the oversampling sysfs file. Accepted values |
| | 25 | are 0, 1, 2 and 3. 2^x when x is the value written to this file |
| | 26 | specifies the number of samples used to calculate the ambient pressure. |
| | 27 | RMS noise is specified with six pascal (without averaging) and decreases |
| | 28 | down to 3 pascal when using an oversampling setting of 3. |
| | 29 | |
| | 30 | This program is free software; you can redistribute it and/or modify |
| | 31 | it under the terms of the GNU General Public License as published by |
| | 32 | the Free Software Foundation; either version 2 of the License, or |
| | 33 | (at your option) any later version. |
| | 34 | |
| | 35 | This program is distributed in the hope that it will be useful, |
| | 36 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| | 37 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| | 38 | GNU General Public License for more details. |
| | 39 | |
| | 40 | You should have received a copy of the GNU General Public License |
| | 41 | along with this program; if not, write to the Free Software |
| | 42 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| | 43 | */ |
| | 44 | |
| | 45 | |
| | 46 | #include <linux/module.h> |
| | 47 | #include <linux/init.h> |
| | 48 | #include <linux/i2c.h> |
| | 49 | #include <linux/slab.h> |
| | 50 | #include <linux/delay.h> |
| | 51 | |
| | 52 | |
| | 53 | #define BMP085_I2C_ADDRESS 0x77 |
| | 54 | #define BMP085_CHIP_ID 0x55 |
| | 55 | |
| | 56 | #define BMP085_CALIBRATION_DATA_START 0xAA |
| | 57 | #define BMP085_CALIBRATION_DATA_LENGTH 11 /* 16 bit values */ |
| | 58 | #define BMP085_CHIP_ID_REG 0xD0 |
| | 59 | #define BMP085_VERSION_REG 0xD1 |
| | 60 | #define BMP085_CTRL_REG 0xF4 |
| | 61 | #define BMP085_TEMP_MEASUREMENT 0x2E |
| | 62 | #define BMP085_PRESSURE_MEASUREMENT 0x34 |
| | 63 | #define BMP085_CONVERSION_REGISTER_MSB 0xF6 |
| | 64 | #define BMP085_CONVERSION_REGISTER_LSB 0xF7 |
| | 65 | #define BMP085_CONVERSION_REGISTER_XLSB 0xF8 |
| | 66 | #define BMP085_TEMP_CONVERSION_TIME 5 |
| | 67 | |
| | 68 | #define BMP085_CLIENT_NAME "bmp085" |
| | 69 | |
| | 70 | |
| | 71 | static const unsigned short normal_i2c[] = { BMP085_I2C_ADDRESS, |
| | 72 | I2C_CLIENT_END }; |
| | 73 | |
| | 74 | struct bmp085_calibration_data { |
| | 75 | s16 AC1, AC2, AC3; |
| | 76 | u16 AC4, AC5, AC6; |
| | 77 | s16 B1, B2; |
| | 78 | s16 MB, MC, MD; |
| | 79 | }; |
| | 80 | |
| | 81 | |
| | 82 | /* Each client has this additional data */ |
| | 83 | struct bmp085_data { |
| | 84 | struct i2c_client *client; |
| | 85 | struct mutex lock; |
| | 86 | struct bmp085_calibration_data calibration; |
| | 87 | u32 raw_temperature; |
| | 88 | u32 raw_pressure; |
| | 89 | unsigned char oversampling_setting; |
| | 90 | u32 last_temp_measurement; |
| | 91 | s32 b6; /* calculated temperature correction coefficient */ |
| | 92 | }; |
| | 93 | |
| | 94 | |
| | 95 | static s32 bmp085_read_calibration_data(struct i2c_client *client) |
| | 96 | { |
| | 97 | u16 tmp[BMP085_CALIBRATION_DATA_LENGTH]; |
| | 98 | struct bmp085_data *data = i2c_get_clientdata(client); |
| | 99 | struct bmp085_calibration_data *cali = &(data->calibration); |
| | 100 | s32 status = i2c_smbus_read_i2c_block_data(client, |
| | 101 | BMP085_CALIBRATION_DATA_START, |
| | 102 | BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16), |
| | 103 | (u8 *)tmp); |
| | 104 | if (status < 0) |
| | 105 | return status; |
| | 106 | |
| | 107 | if (status != BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16)) |
| | 108 | return -EIO; |
| | 109 | |
| | 110 | cali->AC1 = be16_to_cpu(tmp[0]); |
| | 111 | cali->AC2 = be16_to_cpu(tmp[1]); |
| | 112 | cali->AC3 = be16_to_cpu(tmp[2]); |
| | 113 | cali->AC4 = be16_to_cpu(tmp[3]); |
| | 114 | cali->AC5 = be16_to_cpu(tmp[4]); |
| | 115 | cali->AC6 = be16_to_cpu(tmp[5]); |
| | 116 | cali->B1 = be16_to_cpu(tmp[6]); |
| | 117 | cali->B2 = be16_to_cpu(tmp[7]); |
| | 118 | cali->MB = be16_to_cpu(tmp[8]); |
| | 119 | cali->MC = be16_to_cpu(tmp[9]); |
| | 120 | cali->MD = be16_to_cpu(tmp[10]); |
| | 121 | return 0; |
| | 122 | } |
| | 123 | |
| | 124 | |
| | 125 | static s32 bmp085_update_raw_temperature(struct bmp085_data *data) |
| | 126 | { |
| | 127 | u16 tmp; |
| | 128 | s32 status; |
| | 129 | |
| | 130 | mutex_lock(&data->lock); |
| | 131 | status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG, |
| | 132 | BMP085_TEMP_MEASUREMENT); |
| | 133 | if (status != 0) { |
| | 134 | dev_err(&data->client->dev, |
| | 135 | "Error while requesting temperature measurement.\n"); |
| | 136 | goto exit; |
| | 137 | } |
| | 138 | msleep(BMP085_TEMP_CONVERSION_TIME); |
| | 139 | |
| | 140 | status = i2c_smbus_read_i2c_block_data(data->client, |
| | 141 | BMP085_CONVERSION_REGISTER_MSB, sizeof(tmp), (u8 *)&tmp); |
| | 142 | if (status < 0) |
| | 143 | goto exit; |
| | 144 | if (status != sizeof(tmp)) { |
| | 145 | dev_err(&data->client->dev, |
| | 146 | "Error while reading temperature measurement result\n"); |
| | 147 | status = -EIO; |
| | 148 | goto exit; |
| | 149 | } |
| | 150 | data->raw_temperature = be16_to_cpu(tmp); |
| | 151 | data->last_temp_measurement = jiffies; |
| | 152 | status = 0; /* everything ok, return 0 */ |
| | 153 | |
| | 154 | exit: |
| | 155 | mutex_unlock(&data->lock); |
| | 156 | return status; |
| | 157 | } |
| | 158 | |
| | 159 | static s32 bmp085_update_raw_pressure(struct bmp085_data *data) |
| | 160 | { |
| | 161 | u32 tmp = 0; |
| | 162 | s32 status; |
| | 163 | |
| | 164 | mutex_lock(&data->lock); |
| | 165 | status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG, |
| | 166 | BMP085_PRESSURE_MEASUREMENT + (data->oversampling_setting<<6)); |
| | 167 | if (status != 0) { |
| | 168 | dev_err(&data->client->dev, |
| | 169 | "Error while requesting pressure measurement.\n"); |
| | 170 | goto exit; |
| | 171 | } |
| | 172 | |
| | 173 | /* wait for the end of conversion */ |
| | 174 | msleep(2+(3 << data->oversampling_setting)); |
| | 175 | |
| | 176 | /* copy data into a u32 (4 bytes), but skip the first byte. */ |
| | 177 | status = i2c_smbus_read_i2c_block_data(data->client, |
| | 178 | BMP085_CONVERSION_REGISTER_MSB, 3, ((u8 *)&tmp)+1); |
| | 179 | if (status < 0) |
| | 180 | goto exit; |
| | 181 | if (status != 3) { |
| | 182 | dev_err(&data->client->dev, |
| | 183 | "Error while reading pressure measurement results\n"); |
| | 184 | status = -EIO; |
| | 185 | goto exit; |
| | 186 | } |
| | 187 | data->raw_pressure = be32_to_cpu((tmp)); |
| | 188 | data->raw_pressure >>= (8-data->oversampling_setting); |
| | 189 | status = 0; /* everything ok, return 0 */ |
| | 190 | |
| | 191 | exit: |
| | 192 | mutex_unlock(&data->lock); |
| | 193 | return status; |
| | 194 | } |
| | 195 | |
| | 196 | |
| | 197 | /* |
| | 198 | * This function starts the temperature measurement and returns the value |
| | 199 | * in tenth of a degree celsius. |
| | 200 | */ |
| | 201 | static s32 bmp085_get_temperature(struct bmp085_data *data, int *temperature) |
| | 202 | { |
| | 203 | struct bmp085_calibration_data *cali = &data->calibration; |
| | 204 | long x1, x2; |
| | 205 | int status; |
| | 206 | |
| | 207 | status = bmp085_update_raw_temperature(data); |
| | 208 | if (status != 0) |
| | 209 | goto exit; |
| | 210 | |
| | 211 | x1 = ((data->raw_temperature - cali->AC6) * cali->AC5) >> 15; |
| | 212 | x2 = (cali->MC << 11) / (x1 + cali->MD); |
| | 213 | data->b6 = x1 + x2 - 4000; |
| | 214 | /* if NULL just update b6. Used for pressure only measurements */ |
| | 215 | if (temperature != NULL) |
| | 216 | *temperature = (x1+x2+8) >> 4; |
| | 217 | |
| | 218 | exit: |
| | 219 | return status;; |
| | 220 | } |
| | 221 | |
| | 222 | /* |
| | 223 | * This function starts the pressure measurement and returns the value |
| | 224 | * in millibar. Since the pressure depends on the ambient temperature, |
| | 225 | * a temperature measurement is executed if the last known value is older |
| | 226 | * than one second. |
| | 227 | */ |
| | 228 | static s32 bmp085_get_pressure(struct bmp085_data *data, int *pressure) |
| | 229 | { |
| | 230 | struct bmp085_calibration_data *cali = &data->calibration; |
| | 231 | s32 x1, x2, x3, b3; |
| | 232 | u32 b4, b7; |
| | 233 | s32 p; |
| | 234 | int status; |
| | 235 | |
| | 236 | /* alt least every second force an update of the ambient temperature */ |
| | 237 | if (data->last_temp_measurement + 1*HZ < jiffies) { |
| | 238 | status = bmp085_get_temperature(data, NULL); |
| | 239 | if (status != 0) |
| | 240 | goto exit; |
| | 241 | } |
| | 242 | |
| | 243 | status = bmp085_update_raw_pressure(data); |
| | 244 | if (status != 0) |
| | 245 | goto exit; |
| | 246 | |
| | 247 | x1 = (data->b6 * data->b6) >> 12; |
| | 248 | x1 *= cali->B2; |
| | 249 | x1 >>= 11; |
| | 250 | |
| | 251 | x2 = cali->AC2 * data->b6; |
| | 252 | x2 >>= 11; |
| | 253 | |
| | 254 | x3 = x1 + x2; |
| | 255 | |
| | 256 | b3 = (((((s32)cali->AC1) * 4 + x3) << data->oversampling_setting) + 2); |
| | 257 | b3 >>= 2; |
| | 258 | |
| | 259 | x1 = (cali->AC3 * data->b6) >> 13; |
| | 260 | x2 = (cali->B1 * ((data->b6 * data->b6) >> 12)) >> 16; |
| | 261 | x3 = (x1 + x2 + 2) >> 2; |
| | 262 | b4 = (cali->AC4 * (u32)(x3 + 32768)) >> 15; |
| | 263 | |
| | 264 | b7 = ((u32)data->raw_pressure - b3) * |
| | 265 | (50000 >> data->oversampling_setting); |
| | 266 | p = ((b7 < 0x80000000) ? ((b7 << 1) / b4) : ((b7 / b4) * 2)); |
| | 267 | |
| | 268 | x1 = p >> 8; |
| | 269 | x1 *= x1; |
| | 270 | x1 = (x1 * 3038) >> 16; |
| | 271 | x2 = (-7357 * p) >> 16; |
| | 272 | p += (x1 + x2 + 3791) >> 4; |
| | 273 | |
| | 274 | *pressure = p; |
| | 275 | |
| | 276 | exit: |
| | 277 | return status; |
| | 278 | } |
| | 279 | |
| | 280 | /* |
| | 281 | * This function sets the chip-internal oversampling. Valid values are 0..3. |
| | 282 | * The chip will use 2^oversampling samples for internal averaging. |
| | 283 | * This influences the measurement time and the accuracy; larger values |
| | 284 | * increase both. The datasheet gives on overview on how measurement time, |
| | 285 | * accuracy and noise correlate. |
| | 286 | */ |
| | 287 | static void bmp085_set_oversampling(struct bmp085_data *data, |
| | 288 | unsigned char oversampling) |
| | 289 | { |
| | 290 | if (oversampling > 3) |
| | 291 | oversampling = 3; |
| | 292 | data->oversampling_setting = oversampling; |
| | 293 | } |
| | 294 | |
| | 295 | /* |
| | 296 | * Returns the currently selected oversampling. Range: 0..3 |
| | 297 | */ |
| | 298 | static unsigned char bmp085_get_oversampling(struct bmp085_data *data) |
| | 299 | { |
| | 300 | return data->oversampling_setting; |
| | 301 | } |
| | 302 | |
| | 303 | /* sysfs callbacks */ |
| | 304 | static ssize_t set_oversampling(struct device *dev, |
| | 305 | struct device_attribute *attr, |
| | 306 | const char *buf, size_t count) |
| | 307 | { |
| | 308 | struct i2c_client *client = to_i2c_client(dev); |
| | 309 | struct bmp085_data *data = i2c_get_clientdata(client); |
| | 310 | unsigned long oversampling; |
| | 311 | int success = strict_strtoul(buf, 10, &oversampling); |
| | 312 | if (success == 0) { |
| | 313 | bmp085_set_oversampling(data, oversampling); |
| | 314 | return count; |
| | 315 | } |
| | 316 | return success; |
| | 317 | } |
| | 318 | |
| | 319 | static ssize_t show_oversampling(struct device *dev, |
| | 320 | struct device_attribute *attr, char *buf) |
| | 321 | { |
| | 322 | struct i2c_client *client = to_i2c_client(dev); |
| | 323 | struct bmp085_data *data = i2c_get_clientdata(client); |
| | 324 | return sprintf(buf, "%u\n", bmp085_get_oversampling(data)); |
| | 325 | } |
| | 326 | static DEVICE_ATTR(oversampling, S_IWUSR | S_IRUGO, |
| | 327 | show_oversampling, set_oversampling); |
| | 328 | |
| | 329 | |
| | 330 | static ssize_t show_temperature(struct device *dev, |
| | 331 | struct device_attribute *attr, char *buf) |
| | 332 | { |
| | 333 | int temperature; |
| | 334 | int status; |
| | 335 | struct i2c_client *client = to_i2c_client(dev); |
| | 336 | struct bmp085_data *data = i2c_get_clientdata(client); |
| | 337 | |
| | 338 | status = bmp085_get_temperature(data, &temperature); |
| | 339 | if (status != 0) |
| | 340 | return status; |
| | 341 | else |
| | 342 | return sprintf(buf, "%d\n", temperature); |
| | 343 | } |
| | 344 | static DEVICE_ATTR(temp0_input, S_IRUGO, show_temperature, NULL); |
| | 345 | |
| | 346 | |
| | 347 | static ssize_t show_pressure(struct device *dev, |
| | 348 | struct device_attribute *attr, char *buf) |
| | 349 | { |
| | 350 | int pressure; |
| | 351 | int status; |
| | 352 | struct i2c_client *client = to_i2c_client(dev); |
| | 353 | struct bmp085_data *data = i2c_get_clientdata(client); |
| | 354 | |
| | 355 | status = bmp085_get_pressure(data, &pressure); |
| | 356 | if (status != 0) |
| | 357 | return status; |
| | 358 | else |
| | 359 | return sprintf(buf, "%d\n", pressure); |
| | 360 | } |
| | 361 | static DEVICE_ATTR(pressure0_input, S_IRUGO, show_pressure, NULL); |
| | 362 | |
| | 363 | |
| | 364 | static struct attribute *bmp085_attributes[] = { |
| | 365 | &dev_attr_temp0_input.attr, |
| | 366 | &dev_attr_pressure0_input.attr, |
| | 367 | &dev_attr_oversampling.attr, |
| | 368 | NULL |
| | 369 | }; |
| | 370 | |
| | 371 | static const struct attribute_group bmp085_attr_group = { |
| | 372 | .attrs = bmp085_attributes, |
| | 373 | }; |
| | 374 | |
| | 375 | static int bmp085_detect(struct i2c_client *client, struct i2c_board_info *info) |
| | 376 | { |
| | 377 | if (client->addr != BMP085_I2C_ADDRESS) |
| | 378 | return -ENODEV; |
| | 379 | |
| | 380 | if (i2c_smbus_read_byte_data(client, BMP085_CHIP_ID_REG) != BMP085_CHIP_ID) |
| | 381 | return -ENODEV; |
| | 382 | |
| | 383 | return 0; |
| | 384 | } |
| | 385 | |
| | 386 | static int bmp085_init_client(struct i2c_client *client) |
| | 387 | { |
| | 388 | unsigned char version; |
| | 389 | int status; |
| | 390 | struct bmp085_data *data = i2c_get_clientdata(client); |
| | 391 | data->client = client; |
| | 392 | status = bmp085_read_calibration_data(client); |
| | 393 | if (status != 0) |
| | 394 | goto exit; |
| | 395 | version = i2c_smbus_read_byte_data(client, BMP085_VERSION_REG); |
| | 396 | data->last_temp_measurement = 0; |
| | 397 | data->oversampling_setting = 3; |
| | 398 | mutex_init(&data->lock); |
| | 399 | dev_info(&data->client->dev, "BMP085 ver. %d.%d found.\n", |
| | 400 | (version & 0x0F), (version & 0xF0) >> 4); |
| | 401 | exit: |
| | 402 | return status; |
| | 403 | } |
| | 404 | |
| | 405 | static int bmp085_probe(struct i2c_client *client, |
| | 406 | const struct i2c_device_id *id) |
| | 407 | { |
| | 408 | struct bmp085_data *data; |
| | 409 | int err = 0; |
| | 410 | |
| | 411 | data = kzalloc(sizeof(struct bmp085_data), GFP_KERNEL); |
| | 412 | if (!data) { |
| | 413 | err = -ENOMEM; |
| | 414 | goto exit; |
| | 415 | } |
| | 416 | |
| | 417 | /* default settings after POR */ |
| | 418 | data->oversampling_setting = 0x00; |
| | 419 | |
| | 420 | i2c_set_clientdata(client, data); |
| | 421 | |
| | 422 | /* Initialize the BMP085 chip */ |
| | 423 | err = bmp085_init_client(client); |
| | 424 | if (err != 0) |
| | 425 | goto exit_free; |
| | 426 | |
| | 427 | /* Register sysfs hooks */ |
| | 428 | err = sysfs_create_group(&client->dev.kobj, &bmp085_attr_group); |
| | 429 | if (err) |
| | 430 | goto exit_free; |
| | 431 | |
| | 432 | dev_info(&data->client->dev, "Succesfully initialized bmp085!\n"); |
| | 433 | goto exit; |
| | 434 | |
| | 435 | exit_free: |
| | 436 | kfree(data); |
| | 437 | exit: |
| | 438 | return err; |
| | 439 | } |
| | 440 | |
| | 441 | static int bmp085_remove(struct i2c_client *client) |
| | 442 | { |
| | 443 | sysfs_remove_group(&client->dev.kobj, &bmp085_attr_group); |
| | 444 | kfree(i2c_get_clientdata(client)); |
| | 445 | return 0; |
| | 446 | } |
| | 447 | |
| | 448 | static const struct i2c_device_id bmp085_id[] = { |
| | 449 | { "bmp085", 0 }, |
| | 450 | { } |
| | 451 | }; |
| | 452 | |
| | 453 | static struct i2c_driver bmp085_driver = { |
| | 454 | .driver = { |
| | 455 | .owner = THIS_MODULE, |
| | 456 | .name = "bmp085" |
| | 457 | }, |
| | 458 | .id_table = bmp085_id, |
| | 459 | .probe = bmp085_probe, |
| | 460 | .remove = bmp085_remove, |
| | 461 | |
| | 462 | .detect = bmp085_detect, |
| | 463 | .address_list = normal_i2c |
| | 464 | }; |
| | 465 | |
| | 466 | static int __init bmp085_init(void) |
| | 467 | { |
| | 468 | return i2c_add_driver(&bmp085_driver); |
| | 469 | } |
| | 470 | |
| | 471 | static void __exit bmp085_exit(void) |
| | 472 | { |
| | 473 | i2c_del_driver(&bmp085_driver); |
| | 474 | } |
| | 475 | |
| | 476 | |
| | 477 | MODULE_AUTHOR("Christoph Mair <christoph.mair@gmail.com"); |
| | 478 | MODULE_DESCRIPTION("BMP085 driver"); |
| | 479 | MODULE_LICENSE("GPL"); |
| | 480 | |
| | 481 | module_init(bmp085_init); |
| | 482 | module_exit(bmp085_exit); |