UHB AP send supported power type(LPI, SP, VLP) in beacon and probe response IE and STA should connect to these AP only if their regulatory support the AP power type. Beacon/Probe response are reported to userspace with reason "STA regulatory not supporting to connect to AP based on transmitted power type" and it should not connect to AP.
Showing the changes to include/uapi (1 of 6 files). Show all
Unified · Split
| @@ -4260,6 +4260,10 @@ enum nl80211_wmm_rule { · 4259 unmodified lines | ||
| 4260 | 4260 | * allowed for peer-to-peer or adhoc communication under the control |
| 4261 | 4261 | * of a DFS master which operates on the same channel (FCC-594280 D01 |
| 4262 | 4262 | * Section B.3). Should be used together with %NL80211_RRF_DFS only. |
| 4263 | + * @NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT: Client connection to VLP AP | |
| 4264 | + * not allowed using this channel | |
| 4265 | + * @NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT: Client connection to AFC AP | |
| 4266 | + * not allowed using this channel | |
| 4263 | 4267 | * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number |
| 4264 | 4268 | * currently defined |
| 4265 | 4269 | * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use |
| @@ -4300,6 +4304,8 @@ enum nl80211_frequency_attr { · 34 unmodified lines | ||
| 4300 | 4304 | NL80211_FREQUENCY_ATTR_NO_EHT, |
| 4301 | 4305 | NL80211_FREQUENCY_ATTR_PSD, |
| 4302 | 4306 | NL80211_FREQUENCY_ATTR_DFS_CONCURRENT, |
| 4307 | + NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT, | |
| 4308 | + NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT, | |
| 4303 | 4309 | |
| 4304 | 4310 | /* keep last */ |
| 4305 | 4311 | __NL80211_FREQUENCY_ATTR_AFTER_LAST, |
| @@ -4509,6 +4515,8 @@ enum nl80211_sched_scan_match_attr { · 203 unmodified lines | ||
| 4509 | 4515 | peer-to-peer or adhoc communication under the control of a DFS master |
| 4510 | 4516 | which operates on the same channel (FCC-594280 D01 Section B.3). |
| 4511 | 4517 | Should be used together with %NL80211_RRF_DFS only. |
| 4518 | + * @NL80211_RRF_NO_UHB_VLP_CLIENT: Client connection to VLP AP not allowed | |
| 4519 | + * @NL80211_RRF_NO_UHB_AFC_CLIENT: Client connection to AFC AP not allowed | |
| 4512 | 4520 | */ |
| 4513 | 4521 | enum nl80211_reg_rule_flags { |
| 4514 | 4522 | NL80211_RRF_NO_OFDM = 1<<0, |
| @@ -4531,6 +4539,8 @@ enum nl80211_reg_rule_flags { · 16 unmodified lines | ||
| 4531 | 4539 | NL80211_RRF_NO_EHT = 1<<19, |
| 4532 | 4540 | NL80211_RRF_PSD = 1<<20, |
| 4533 | 4541 | NL80211_RRF_DFS_CONCURRENT = 1<<21, |
| 4542 | + NL80211_RRF_NO_UHB_VLP_CLIENT = 1<<22, | |
| 4543 | + NL80211_RRF_NO_UHB_AFC_CLIENT = 1<<23, | |
| 4534 | 4544 | }; |
| 4535 | 4545 | |
| 4536 | 4546 | #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR |
| @@ -5086,9 +5096,12 @@ enum nl80211_bss_use_for { · 549 unmodified lines | ||
| 5086 | 5096 | * BSS isn't possible |
| 5087 | 5097 | * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't |
| 5088 | 5098 | * supported by the device, and this BSS entry represents one. |
| 5099 | + * @NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH: STA is not supporting | |
| 5100 | + * the AP power type (SP, VLP, AP) that the AP uses. | |
| 5089 | 5101 | */ |
| 5090 | 5102 | enum nl80211_bss_cannot_use_reasons { |
| 5091 | 5103 | NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY = 1 << 0, |
| 5104 | + NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH = 1 << 1, | |
| 5092 | 5105 | }; |
| 5093 | 5106 | |
| 5094 | 5107 | /** |