All the MFD components are gone from the header meanwhile. Only the MMC relevant data is left which makes it a platform_data for the MMC controller. Move the header to the now fitting directory.
Showing the changes to include/linux/platform_data (1 of 13 files). Show all
Unified · Split
| @@ -0,0 +1,64 @@ | ||
| 1 | +/* SPDX-License-Identifier: GPL-2.0 */ | |
| 2 | +#ifndef MFD_TMIO_H | |
| 3 | +#define MFD_TMIO_H | |
| 4 | + | |
| 5 | +#include <linux/platform_device.h> | |
| 6 | +#include <linux/types.h> | |
| 7 | + | |
| 8 | +/* TMIO MMC platform flags */ | |
| 9 | + | |
| 10 | +/* | |
| 11 | + * Some controllers can support a 2-byte block size when the bus width is | |
| 12 | + * configured in 4-bit mode. | |
| 13 | + */ | |
| 14 | +#define TMIO_MMC_BLKSZ_2BYTES BIT(1) | |
| 15 | + | |
| 16 | +/* Some controllers can support SDIO IRQ signalling */ | |
| 17 | +#define TMIO_MMC_SDIO_IRQ BIT(2) | |
| 18 | + | |
| 19 | +/* Some features are only available or tested on R-Car Gen2 or later */ | |
| 20 | +#define TMIO_MMC_MIN_RCAR2 BIT(3) | |
| 21 | + | |
| 22 | +/* | |
| 23 | + * Some controllers require waiting for the SD bus to become idle before | |
| 24 | + * writing to some registers. | |
| 25 | + */ | |
| 26 | +#define TMIO_MMC_HAS_IDLE_WAIT BIT(4) | |
| 27 | + | |
| 28 | +/* | |
| 29 | + * Use the busy timeout feature. Probably all TMIO versions support it. Yet, | |
| 30 | + * we don't have documentation for old variants, so we enable only known good | |
| 31 | + * variants with this flag. Can be removed once all variants are known good. | |
| 32 | + */ | |
| 33 | +#define TMIO_MMC_USE_BUSY_TIMEOUT BIT(5) | |
| 34 | + | |
| 35 | +/* Some controllers have CMD12 automatically issue/non-issue register */ | |
| 36 | +#define TMIO_MMC_HAVE_CMD12_CTRL BIT(7) | |
| 37 | + | |
| 38 | +/* Controller has some SDIO status bits which must be 1 */ | |
| 39 | +#define TMIO_MMC_SDIO_STATUS_SETBITS BIT(8) | |
| 40 | + | |
| 41 | +/* Some controllers have a 32-bit wide data port register */ | |
| 42 | +#define TMIO_MMC_32BIT_DATA_PORT BIT(9) | |
| 43 | + | |
| 44 | +/* Some controllers allows to set SDx actual clock */ | |
| 45 | +#define TMIO_MMC_CLK_ACTUAL BIT(10) | |
| 46 | + | |
| 47 | +/* Some controllers have a CBSY bit */ | |
| 48 | +#define TMIO_MMC_HAVE_CBSY BIT(11) | |
| 49 | + | |
| 50 | +struct tmio_mmc_data { | |
| 51 | + void *chan_priv_tx; | |
| 52 | + void *chan_priv_rx; | |
| 53 | + unsigned int hclk; | |
| 54 | + unsigned long capabilities; | |
| 55 | + unsigned long capabilities2; | |
| 56 | + unsigned long flags; | |
| 57 | + u32 ocr_mask; /* available voltages */ | |
| 58 | + dma_addr_t dma_rx_offset; | |
| 59 | + unsigned int max_blk_count; | |
| 60 | + unsigned short max_segs; | |
| 61 | + void (*set_pwr)(struct platform_device *host, int state); | |
| 62 | + void (*set_clk_div)(struct platform_device *host, int state); | |
| 63 | +}; | |
| 64 | +#endif | |