i2c: pxa: move private definitions to i2c-pxa.c

Move driver-private definitions out of the i2c-pxa.h platform data header file into the driver itself. Nothing outside of the driver makes use of these constants.

Russell King committed 6 years ago

Commit 79622f31 parent ee478932 files · +43 −48Browse files

Showing the changes to include/linux (1 of 2 files). Show all

Unified · Split

include/linux/platform_data/i2c-pxa.h+0−48

@@ -7,54 +7,6 @@ · 6 unmodified lines
7	7	#ifndef _I2C_PXA_H_
8	8	#define _I2C_PXA_H_
9	9
10		−#if 0
11		−#define DEF_TIMEOUT 3
12		−#else
13		−/* need a longer timeout if we're dealing with the fact we may well be
14		− * looking at a multi-master environment
15		−*/
16		−#define DEF_TIMEOUT 32
17		−#endif
18		−
19		−#define BUS_ERROR (-EREMOTEIO)
20		−#define XFER_NAKED (-ECONNREFUSED)
21		−#define I2C_RETRY (-2000) /* an error has occurred retry transmit */
22		−
23		−/* ICR initialize bit values
24		−*
25		−* 15. FM 0 (100 Khz operation)
26		−* 14. UR 0 (No unit reset)
27		−* 13. SADIE 0 (Disables the unit from interrupting on slave addresses
28		−* matching its slave address)
29		−* 12. ALDIE 0 (Disables the unit from interrupt when it loses arbitration
30		−* in master mode)
31		−* 11. SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode)
32		−* 10. BEIE 1 (Enable interrupts from detected bus errors, no ACK sent)
33		−* 9. IRFIE 1 (Enable interrupts from full buffer received)
34		−* 8. ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty)
35		−* 7. GCD 1 (Disables i2c unit response to general call messages as a slave)
36		−* 6. IUE 0 (Disable unit until we change settings)
37		−* 5. SCLE 1 (Enables the i2c clock output for master mode (drives SCL)
38		−* 4. MA 0 (Only send stop with the ICR stop bit)
39		−* 3. TB 0 (We are not transmitting a byte initially)
40		−* 2. ACKNAK 0 (Send an ACK after the unit receives a byte)
41		−* 1. STOP 0 (Do not send a STOP)
42		−* 0. START 0 (Do not send a START)
43		−*
44		−*/
45		−#define I2C_ICR_INIT (ICR_BEIE \| ICR_IRFIE \| ICR_ITEIE \| ICR_GCD \| ICR_SCLE)
46		−
47		−/* I2C status register init values
48		− *
49		− * 10. BED 1 (Clear bus error detected)
50		− * 9. SAD 1 (Clear slave address detected)
51		− * 7. IRF 1 (Clear IDBR Receive Full)
52		− * 6. ITE 1 (Clear IDBR Transmit Empty)
53		− * 5. ALD 1 (Clear Arbitration Loss Detected)
54		− * 4. SSD 1 (Clear Slave Stop Detected)
55		− */
56		−#define I2C_ISR_INIT 0x7FF /* status register init */
57		−
58	10	struct i2c_pxa_platform_data {
59	11	unsigned int class;
60	12	unsigned int use_pio :1;