History

serial: rp2: New driver for Comtrol RocketPort 2 cards

This driver supports the RocketPort EXPRESS and RocketPort INFINITY families of PCI/PCIe multiport serial adapters. These adapters use a "RocketPort 2" ASIC that is not compatible with the original RocketPort driver (CONFIG_ROCKETPORT). Tested with the RocketPort EXPRESS Octa DB9 and Quad DB9. Also added an old RocketPort 8J PCI card to the same system to verify that rocket.c and rp2.c coexist peacefully.

Kevin Cernekee committed 13 years ago

Commit 7d9f49a1 parent b9d42394 files · +913 −0Browse files

Unified · Split

4 files
  1. drivers/tty/serial/Kconfig +24 −0
  2. drivers/tty/serial/Makefile +1 −0
  3. drivers/tty/serial/rp2.c +885 −0
  4. include/uapi/linux/serial_core.h +3 −0
drivers/tty/serial/Kconfig+24−0
@@ -1458,4 +1458,28 @@ config SERIAL_ARC_NR_PORTS · 1457 unmodified lines
1458 Set this to the number of serial ports you want the driver1458 Set this to the number of serial ports you want the driver
1459 to support.1459 to support.
1460 1460
1461config SERIAL_RP2
1462 tristate "Comtrol RocketPort EXPRESS/INFINITY support"
1463 depends on PCI
1464 select SERIAL_CORE
1465 help
1466 This driver supports the Comtrol RocketPort EXPRESS and
1467 RocketPort INFINITY families of PCI/PCIe multiport serial adapters.
1468 These adapters use a "RocketPort 2" ASIC that is not compatible
1469 with the original RocketPort driver (CONFIG_ROCKETPORT).
1470
1471 To compile this driver as a module, choose M here: the
1472 module will be called rp2.
1473
1474 If you want to compile this driver into the kernel, say Y here. If
1475 you don't have a suitable RocketPort card installed, say N.
1476
1477config SERIAL_RP2_NR_UARTS
1478 int "Maximum number of RocketPort EXPRESS/INFINITY ports"
1479 depends on SERIAL_RP2
1480 default "32"
1481 help
1482 If multiple cards are present, the default limit of 32 ports may
1483 need to be increased.
1484
1461endmenu1485endmenu
drivers/tty/serial/Makefile+1−0
@@ -84,3 +84,4 @@ obj-$(CONFIG_SERIAL_TEGRA) += serial-tegra.o · 83 unmodified lines
84obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o84obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
85obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o85obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
86obj-$(CONFIG_SERIAL_ARC) += arc_uart.o86obj-$(CONFIG_SERIAL_ARC) += arc_uart.o
87obj-$(CONFIG_SERIAL_RP2) += rp2.o
drivers/tty/serial/rp2.c+885−0
@@ -0,0 +1,885 @@
1/*
2 * Driver for Comtrol RocketPort EXPRESS/INFINITY cards
3 *
4 * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
5 *
6 * Inspired by, and loosely based on:
7 *
8 * ar933x_uart.c
9 * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
10 *
11 * rocketport_infinity_express-linux-1.20.tar.gz
12 * Copyright (C) 2004-2011 Comtrol, Inc.
13 *
14 * This program is free software; you can redistribute it and/or modify it
15 * under the terms of the GNU General Public License version 2 as published
16 * by the Free Software Foundation.
17 */
18
19#include <linux/bitops.h>
20#include <linux/compiler.h>
21#include <linux/completion.h>
22#include <linux/console.h>
23#include <linux/delay.h>
24#include <linux/firmware.h>
25#include <linux/init.h>
26#include <linux/io.h>
27#include <linux/ioport.h>
28#include <linux/irq.h>
29#include <linux/kernel.h>
30#include <linux/log2.h>
31#include <linux/module.h>
32#include <linux/pci.h>
33#include <linux/serial.h>
34#include <linux/serial_core.h>
35#include <linux/slab.h>
36#include <linux/sysrq.h>
37#include <linux/tty.h>
38#include <linux/tty_flip.h>
39#include <linux/types.h>
40
41#define DRV_NAME "rp2"
42
43#define RP2_FW_NAME "rp2.fw"
44#define RP2_UCODE_BYTES 0x3f
45
46#define PORTS_PER_ASIC 16
47#define ALL_PORTS_MASK (BIT(PORTS_PER_ASIC) - 1)
48
49#define UART_CLOCK 44236800
50#define DEFAULT_BAUD_DIV (UART_CLOCK / (9600 * 16))
51#define FIFO_SIZE 512
52
53/* BAR0 registers */
54#define RP2_FPGA_CTL0 0x110
55#define RP2_FPGA_CTL1 0x11c
56#define RP2_IRQ_MASK 0x1ec
57#define RP2_IRQ_MASK_EN_m BIT(0)
58#define RP2_IRQ_STATUS 0x1f0
59
60/* BAR1 registers */
61#define RP2_ASIC_SPACING 0x1000
62#define RP2_ASIC_OFFSET(i) ((i) << ilog2(RP2_ASIC_SPACING))
63
64#define RP2_PORT_BASE 0x000
65#define RP2_PORT_SPACING 0x040
66
67#define RP2_UCODE_BASE 0x400
68#define RP2_UCODE_SPACING 0x80
69
70#define RP2_CLK_PRESCALER 0xc00
71#define RP2_CH_IRQ_STAT 0xc04
72#define RP2_CH_IRQ_MASK 0xc08
73#define RP2_ASIC_IRQ 0xd00
74#define RP2_ASIC_IRQ_EN_m BIT(20)
75#define RP2_GLOBAL_CMD 0xd0c
76#define RP2_ASIC_CFG 0xd04
77
78/* port registers */
79#define RP2_DATA_DWORD 0x000
80
81#define RP2_DATA_BYTE 0x008
82#define RP2_DATA_BYTE_ERR_PARITY_m BIT(8)
83#define RP2_DATA_BYTE_ERR_OVERRUN_m BIT(9)
84#define RP2_DATA_BYTE_ERR_FRAMING_m BIT(10)
85#define RP2_DATA_BYTE_BREAK_m BIT(11)
86
87/* This lets uart_insert_char() drop bytes received on a !CREAD port */
88#define RP2_DUMMY_READ BIT(16)
89
90#define RP2_DATA_BYTE_EXCEPTION_MASK (RP2_DATA_BYTE_ERR_PARITY_m | \
91 RP2_DATA_BYTE_ERR_OVERRUN_m | \
92 RP2_DATA_BYTE_ERR_FRAMING_m | \
93 RP2_DATA_BYTE_BREAK_m)
94
95#define RP2_RX_FIFO_COUNT 0x00c
96#define RP2_TX_FIFO_COUNT 0x00e
97
98#define RP2_CHAN_STAT 0x010
99#define RP2_CHAN_STAT_RXDATA_m BIT(0)
100#define RP2_CHAN_STAT_DCD_m BIT(3)
101#define RP2_CHAN_STAT_DSR_m BIT(4)
102#define RP2_CHAN_STAT_CTS_m BIT(5)
103#define RP2_CHAN_STAT_RI_m BIT(6)
104#define RP2_CHAN_STAT_OVERRUN_m BIT(13)
105#define RP2_CHAN_STAT_DSR_CHANGED_m BIT(16)
106#define RP2_CHAN_STAT_CTS_CHANGED_m BIT(17)
107#define RP2_CHAN_STAT_CD_CHANGED_m BIT(18)
108#define RP2_CHAN_STAT_RI_CHANGED_m BIT(22)
109#define RP2_CHAN_STAT_TXEMPTY_m BIT(25)
110
111#define RP2_CHAN_STAT_MS_CHANGED_MASK (RP2_CHAN_STAT_DSR_CHANGED_m | \
112 RP2_CHAN_STAT_CTS_CHANGED_m | \
113 RP2_CHAN_STAT_CD_CHANGED_m | \
114 RP2_CHAN_STAT_RI_CHANGED_m)
115
116#define RP2_TXRX_CTL 0x014
117#define RP2_TXRX_CTL_MSRIRQ_m BIT(0)
118#define RP2_TXRX_CTL_RXIRQ_m BIT(2)
119#define RP2_TXRX_CTL_RX_TRIG_s 3
120#define RP2_TXRX_CTL_RX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
121#define RP2_TXRX_CTL_RX_TRIG_1 (0x1 << RP2_TXRX_CTL_RX_TRIG_s)
122#define RP2_TXRX_CTL_RX_TRIG_256 (0x2 << RP2_TXRX_CTL_RX_TRIG_s)
123#define RP2_TXRX_CTL_RX_TRIG_448 (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
124#define RP2_TXRX_CTL_RX_EN_m BIT(5)
125#define RP2_TXRX_CTL_RTSFLOW_m BIT(6)
126#define RP2_TXRX_CTL_DTRFLOW_m BIT(7)
127#define RP2_TXRX_CTL_TX_TRIG_s 16
128#define RP2_TXRX_CTL_TX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
129#define RP2_TXRX_CTL_DSRFLOW_m BIT(18)
130#define RP2_TXRX_CTL_TXIRQ_m BIT(19)
131#define RP2_TXRX_CTL_CTSFLOW_m BIT(23)
132#define RP2_TXRX_CTL_TX_EN_m BIT(24)
133#define RP2_TXRX_CTL_RTS_m BIT(25)
134#define RP2_TXRX_CTL_DTR_m BIT(26)
135#define RP2_TXRX_CTL_LOOP_m BIT(27)
136#define RP2_TXRX_CTL_BREAK_m BIT(28)
137#define RP2_TXRX_CTL_CMSPAR_m BIT(29)
138#define RP2_TXRX_CTL_nPARODD_m BIT(30)
139#define RP2_TXRX_CTL_PARENB_m BIT(31)
140
141#define RP2_UART_CTL 0x018
142#define RP2_UART_CTL_MODE_s 0
143#define RP2_UART_CTL_MODE_m (0x7 << RP2_UART_CTL_MODE_s)
144#define RP2_UART_CTL_MODE_rs232 (0x1 << RP2_UART_CTL_MODE_s)
145#define RP2_UART_CTL_FLUSH_RX_m BIT(3)
146#define RP2_UART_CTL_FLUSH_TX_m BIT(4)
147#define RP2_UART_CTL_RESET_CH_m BIT(5)
148#define RP2_UART_CTL_XMIT_EN_m BIT(6)
149#define RP2_UART_CTL_DATABITS_s 8
150#define RP2_UART_CTL_DATABITS_m (0x3 << RP2_UART_CTL_DATABITS_s)
151#define RP2_UART_CTL_DATABITS_8 (0x3 << RP2_UART_CTL_DATABITS_s)
152#define RP2_UART_CTL_DATABITS_7 (0x2 << RP2_UART_CTL_DATABITS_s)
153#define RP2_UART_CTL_DATABITS_6 (0x1 << RP2_UART_CTL_DATABITS_s)
154#define RP2_UART_CTL_DATABITS_5 (0x0 << RP2_UART_CTL_DATABITS_s)
155#define RP2_UART_CTL_STOPBITS_m BIT(10)
156
157#define RP2_BAUD 0x01c
158
159/* ucode registers */
160#define RP2_TX_SWFLOW 0x02
161#define RP2_TX_SWFLOW_ena 0x81
162#define RP2_TX_SWFLOW_dis 0x9d
163
164#define RP2_RX_SWFLOW 0x0c
165#define RP2_RX_SWFLOW_ena 0x81
166#define RP2_RX_SWFLOW_dis 0x8d
167
168#define RP2_RX_FIFO 0x37
169#define RP2_RX_FIFO_ena 0x08
170#define RP2_RX_FIFO_dis 0x81
171
172static struct uart_driver rp2_uart_driver = {
173 .owner = THIS_MODULE,
174 .driver_name = DRV_NAME,
175 .dev_name = "ttyRP",
176 .nr = CONFIG_SERIAL_RP2_NR_UARTS,
177};
178
179struct rp2_card;
180
181struct rp2_uart_port {
182 struct uart_port port;
183 int idx;
184 int ignore_rx;
185 struct rp2_card *card;
186 void __iomem *asic_base;
187 void __iomem *base;
188 void __iomem *ucode;
189};
190
191struct rp2_card {
192 struct pci_dev *pdev;
193 struct rp2_uart_port *ports;
194 int n_ports;
195 int initialized_ports;
196 int minor_start;
197 int smpte;
198 void __iomem *bar0;
199 void __iomem *bar1;
200 spinlock_t card_lock;
201 struct completion fw_loaded;
202};
203
204#define RP_ID(prod) PCI_VDEVICE(RP, (prod))
205#define RP_CAP(ports, smpte) (((ports) << 8) | ((smpte) << 0))
206
207static inline void rp2_decode_cap(const struct pci_device_id *id,
208 int *ports, int *smpte)
209{
210 *ports = id->driver_data >> 8;
211 *smpte = id->driver_data & 0xff;
212}
213
214static DEFINE_SPINLOCK(rp2_minor_lock);
215static int rp2_minor_next;
216
217static int rp2_alloc_ports(int n_ports)
218{
219 int ret = -ENOSPC;
220
221 spin_lock(&rp2_minor_lock);
222 if (rp2_minor_next + n_ports <= CONFIG_SERIAL_RP2_NR_UARTS) {
223 /* sorry, no support for hot unplugging individual cards */
224 ret = rp2_minor_next;
225 rp2_minor_next += n_ports;
226 }
227 spin_unlock(&rp2_minor_lock);
228
229 return ret;
230}
231
232static inline struct rp2_uart_port *port_to_up(struct uart_port *port)
233{
234 return container_of(port, struct rp2_uart_port, port);
235}
236
237static void rp2_rmw(struct rp2_uart_port *up, int reg,
238 u32 clr_bits, u32 set_bits)
239{
240 u32 tmp = readl(up->base + reg);
241 tmp &= ~clr_bits;
242 tmp |= set_bits;
243 writel(tmp, up->base + reg);
244}
245
246static void rp2_rmw_clr(struct rp2_uart_port *up, int reg, u32 val)
247{
248 rp2_rmw(up, reg, val, 0);
249}
250
251static void rp2_rmw_set(struct rp2_uart_port *up, int reg, u32 val)
252{
253 rp2_rmw(up, reg, 0, val);
254}
255
256static void rp2_mask_ch_irq(struct rp2_uart_port *up, int ch_num,
257 int is_enabled)
258{
259 unsigned long flags, irq_mask;
260
261 spin_lock_irqsave(&up->card->card_lock, flags);
262
263 irq_mask = readl(up->asic_base + RP2_CH_IRQ_MASK);
264 if (is_enabled)
265 irq_mask &= ~BIT(ch_num);
266 else
267 irq_mask |= BIT(ch_num);
268 writel(irq_mask, up->asic_base + RP2_CH_IRQ_MASK);
269
270 spin_unlock_irqrestore(&up->card->card_lock, flags);
271}
272
273static unsigned int rp2_uart_tx_empty(struct uart_port *port)
274{
275 struct rp2_uart_port *up = port_to_up(port);
276 unsigned long tx_fifo_bytes, flags;
277
278 /*
279 * This should probably check the transmitter, not the FIFO.
280 * But the TXEMPTY bit doesn't seem to work unless the TX IRQ is
281 * enabled.
282 */
283 spin_lock_irqsave(&up->port.lock, flags);
284 tx_fifo_bytes = readw(up->base + RP2_TX_FIFO_COUNT);
285 spin_unlock_irqrestore(&up->port.lock, flags);
286
287 return tx_fifo_bytes ? 0 : TIOCSER_TEMT;
288}
289
290static unsigned int rp2_uart_get_mctrl(struct uart_port *port)
291{
292 struct rp2_uart_port *up = port_to_up(port);
293 u32 status;
294
295 status = readl(up->base + RP2_CHAN_STAT);
296 return ((status & RP2_CHAN_STAT_DCD_m) ? TIOCM_CAR : 0) |
297 ((status & RP2_CHAN_STAT_DSR_m) ? TIOCM_DSR : 0) |
298 ((status & RP2_CHAN_STAT_CTS_m) ? TIOCM_CTS : 0) |
299 ((status & RP2_CHAN_STAT_RI_m) ? TIOCM_RI : 0);
300}
301
302static void rp2_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
303{
304 rp2_rmw(port_to_up(port), RP2_TXRX_CTL,
305 RP2_TXRX_CTL_DTR_m | RP2_TXRX_CTL_RTS_m | RP2_TXRX_CTL_LOOP_m,
306 ((mctrl & TIOCM_DTR) ? RP2_TXRX_CTL_DTR_m : 0) |
307 ((mctrl & TIOCM_RTS) ? RP2_TXRX_CTL_RTS_m : 0) |
308 ((mctrl & TIOCM_LOOP) ? RP2_TXRX_CTL_LOOP_m : 0));
309}
310
311static void rp2_uart_start_tx(struct uart_port *port)
312{
313 rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m);
314}
315
316static void rp2_uart_stop_tx(struct uart_port *port)
317{
318 rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m);
319}
320
321static void rp2_uart_stop_rx(struct uart_port *port)
322{
323 rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_RXIRQ_m);
324}
325
326static void rp2_uart_break_ctl(struct uart_port *port, int break_state)
327{
328 unsigned long flags;
329
330 spin_lock_irqsave(&port->lock, flags);
331 rp2_rmw(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_BREAK_m,
332 break_state ? RP2_TXRX_CTL_BREAK_m : 0);
333 spin_unlock_irqrestore(&port->lock, flags);
334}
335
336static void rp2_uart_enable_ms(struct uart_port *port)
337{
338 rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m);
339}
340
341static void __rp2_uart_set_termios(struct rp2_uart_port *up,
342 unsigned long cfl,
343 unsigned long ifl,
344 unsigned int baud_div)
345{
346 /* baud rate divisor (calculated elsewhere). 0 = divide-by-1 */
347 writew(baud_div - 1, up->base + RP2_BAUD);
348
349 /* data bits and stop bits */
350 rp2_rmw(up, RP2_UART_CTL,
351 RP2_UART_CTL_STOPBITS_m | RP2_UART_CTL_DATABITS_m,
352 ((cfl & CSTOPB) ? RP2_UART_CTL_STOPBITS_m : 0) |
353 (((cfl & CSIZE) == CS8) ? RP2_UART_CTL_DATABITS_8 : 0) |
354 (((cfl & CSIZE) == CS7) ? RP2_UART_CTL_DATABITS_7 : 0) |
355 (((cfl & CSIZE) == CS6) ? RP2_UART_CTL_DATABITS_6 : 0) |
356 (((cfl & CSIZE) == CS5) ? RP2_UART_CTL_DATABITS_5 : 0));
357
358 /* parity and hardware flow control */
359 rp2_rmw(up, RP2_TXRX_CTL,
360 RP2_TXRX_CTL_PARENB_m | RP2_TXRX_CTL_nPARODD_m |
361 RP2_TXRX_CTL_CMSPAR_m | RP2_TXRX_CTL_DTRFLOW_m |
362 RP2_TXRX_CTL_DSRFLOW_m | RP2_TXRX_CTL_RTSFLOW_m |
363 RP2_TXRX_CTL_CTSFLOW_m,
364 ((cfl & PARENB) ? RP2_TXRX_CTL_PARENB_m : 0) |
365 ((cfl & PARODD) ? 0 : RP2_TXRX_CTL_nPARODD_m) |
366 ((cfl & CMSPAR) ? RP2_TXRX_CTL_CMSPAR_m : 0) |
367 ((cfl & CRTSCTS) ? (RP2_TXRX_CTL_RTSFLOW_m |
368 RP2_TXRX_CTL_CTSFLOW_m) : 0));
369
370 /* XON/XOFF software flow control */
371 writeb((ifl & IXON) ? RP2_TX_SWFLOW_ena : RP2_TX_SWFLOW_dis,
372 up->ucode + RP2_TX_SWFLOW);
373 writeb((ifl & IXOFF) ? RP2_RX_SWFLOW_ena : RP2_RX_SWFLOW_dis,
374 up->ucode + RP2_RX_SWFLOW);
375}
376
377static void rp2_uart_set_termios(struct uart_port *port,
378 struct ktermios *new,
379 struct ktermios *old)
380{
381 struct rp2_uart_port *up = port_to_up(port);
382 unsigned long flags;
383 unsigned int baud, baud_div;
384
385 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
386 baud_div = uart_get_divisor(port, baud);
387
388 if (tty_termios_baud_rate(new))
389 tty_termios_encode_baud_rate(new, baud, baud);
390
391 spin_lock_irqsave(&port->lock, flags);
392
393 /* ignore all characters if CREAD is not set */
394 port->ignore_status_mask = (new->c_cflag & CREAD) ? 0 : RP2_DUMMY_READ;
395
396 __rp2_uart_set_termios(up, new->c_cflag, new->c_iflag, baud_div);
397 uart_update_timeout(port, new->c_cflag, baud);
398
399 spin_unlock_irqrestore(&port->lock, flags);
400}
401
402static void rp2_rx_chars(struct rp2_uart_port *up)
403{
404 u16 bytes = readw(up->base + RP2_RX_FIFO_COUNT);
405 struct tty_port *port = &up->port.state->port;
406
407 for (; bytes != 0; bytes--) {
408 u32 byte = readw(up->base + RP2_DATA_BYTE) | RP2_DUMMY_READ;
409 char ch = byte & 0xff;
410
411 if (likely(!(byte & RP2_DATA_BYTE_EXCEPTION_MASK))) {
412 if (!uart_handle_sysrq_char(&up->port, ch))
413 uart_insert_char(&up->port, byte, 0, ch,
414 TTY_NORMAL);
415 } else {
416 char flag = TTY_NORMAL;
417
418 if (byte & RP2_DATA_BYTE_BREAK_m)
419 flag = TTY_BREAK;
420 else if (byte & RP2_DATA_BYTE_ERR_FRAMING_m)
421 flag = TTY_FRAME;
422 else if (byte & RP2_DATA_BYTE_ERR_PARITY_m)
423 flag = TTY_PARITY;
424 uart_insert_char(&up->port, byte,
425 RP2_DATA_BYTE_ERR_OVERRUN_m, ch, flag);
426 }
427 up->port.icount.rx++;
428 }
429
430 tty_flip_buffer_push(port);
431}
432
433static void rp2_tx_chars(struct rp2_uart_port *up)
434{
435 u16 max_tx = FIFO_SIZE - readw(up->base + RP2_TX_FIFO_COUNT);
436 struct circ_buf *xmit = &up->port.state->xmit;
437
438 if (uart_tx_stopped(&up->port)) {
439 rp2_uart_stop_tx(&up->port);
440 return;
441 }
442
443 for (; max_tx != 0; max_tx--) {
444 if (up->port.x_char) {
445 writeb(up->port.x_char, up->base + RP2_DATA_BYTE);
446 up->port.x_char = 0;
447 up->port.icount.tx++;
448 continue;
449 }
450 if (uart_circ_empty(xmit)) {
451 rp2_uart_stop_tx(&up->port);
452 break;
453 }
454 writeb(xmit->buf[xmit->tail], up->base + RP2_DATA_BYTE);
455 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
456 up->port.icount.tx++;
457 }
458
459 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
460 uart_write_wakeup(&up->port);
461}
462
463static void rp2_ch_interrupt(struct rp2_uart_port *up)
464{
465 u32 status;
466
467 spin_lock(&up->port.lock);
468
469 /*
470 * The IRQ status bits are clear-on-write. Other status bits in
471 * this register aren't, so it's harmless to write to them.
472 */
473 status = readl(up->base + RP2_CHAN_STAT);
474 writel(status, up->base + RP2_CHAN_STAT);
475
476 if (status & RP2_CHAN_STAT_RXDATA_m)
477 rp2_rx_chars(up);
478 if (status & RP2_CHAN_STAT_TXEMPTY_m)
479 rp2_tx_chars(up);
480 if (status & RP2_CHAN_STAT_MS_CHANGED_MASK)
481 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
482
483 spin_unlock(&up->port.lock);
484}
485
486static int rp2_asic_interrupt(struct rp2_card *card, unsigned int asic_id)
487{
488 void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id);
489 int ch, handled = 0;
490 unsigned long status = readl(base + RP2_CH_IRQ_STAT) &
491 ~readl(base + RP2_CH_IRQ_MASK);
492
493 for_each_set_bit(ch, &status, PORTS_PER_ASIC) {
494 rp2_ch_interrupt(&card->ports[ch]);
495 handled++;
496 }
497 return handled;
498}
499
500static irqreturn_t rp2_uart_interrupt(int irq, void *dev_id)
501{
502 struct rp2_card *card = dev_id;
503 int handled;
504
505 handled = rp2_asic_interrupt(card, 0);
506 if (card->n_ports >= PORTS_PER_ASIC)
507 handled += rp2_asic_interrupt(card, 1);
508
509 return handled ? IRQ_HANDLED : IRQ_NONE;
510}
511
512static inline void rp2_flush_fifos(struct rp2_uart_port *up)
513{
514 rp2_rmw_set(up, RP2_UART_CTL,
515 RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m);
516 readl(up->base + RP2_UART_CTL);
517 udelay(10);
518 rp2_rmw_clr(up, RP2_UART_CTL,
519 RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m);
520}
521
522static int rp2_uart_startup(struct uart_port *port)
523{
524 struct rp2_uart_port *up = port_to_up(port);
525
526 rp2_flush_fifos(up);
527 rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m, RP2_TXRX_CTL_RXIRQ_m);
528 rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_RX_TRIG_m,
529 RP2_TXRX_CTL_RX_TRIG_1);
530 rp2_rmw(up, RP2_CHAN_STAT, 0, 0);
531 rp2_mask_ch_irq(up, up->idx, 1);
532
533 return 0;
534}
535
536static void rp2_uart_shutdown(struct uart_port *port)
537{
538 struct rp2_uart_port *up = port_to_up(port);
539 unsigned long flags;
540
541 rp2_uart_break_ctl(port, 0);
542
543 spin_lock_irqsave(&port->lock, flags);
544 rp2_mask_ch_irq(up, up->idx, 0);
545 rp2_rmw(up, RP2_CHAN_STAT, 0, 0);
546 spin_unlock_irqrestore(&port->lock, flags);
547}
548
549static const char *rp2_uart_type(struct uart_port *port)
550{
551 return (port->type == PORT_RP2) ? "RocketPort 2 UART" : NULL;
552}
553
554static void rp2_uart_release_port(struct uart_port *port)
555{
556 /* Nothing to release ... */
557}
558
559static int rp2_uart_request_port(struct uart_port *port)
560{
561 /* UARTs always present */
562 return 0;
563}
564
565static void rp2_uart_config_port(struct uart_port *port, int flags)
566{
567 if (flags & UART_CONFIG_TYPE)
568 port->type = PORT_RP2;
569}
570
571static int rp2_uart_verify_port(struct uart_port *port,
572 struct serial_struct *ser)
573{
574 if (ser->type != PORT_UNKNOWN && ser->type != PORT_RP2)
575 return -EINVAL;
576
577 return 0;
578}
579
580static const struct uart_ops rp2_uart_ops = {
581 .tx_empty = rp2_uart_tx_empty,
582 .set_mctrl = rp2_uart_set_mctrl,
583 .get_mctrl = rp2_uart_get_mctrl,
584 .stop_tx = rp2_uart_stop_tx,
585 .start_tx = rp2_uart_start_tx,
586 .stop_rx = rp2_uart_stop_rx,
587 .enable_ms = rp2_uart_enable_ms,
588 .break_ctl = rp2_uart_break_ctl,
589 .startup = rp2_uart_startup,
590 .shutdown = rp2_uart_shutdown,
591 .set_termios = rp2_uart_set_termios,
592 .type = rp2_uart_type,
593 .release_port = rp2_uart_release_port,
594 .request_port = rp2_uart_request_port,
595 .config_port = rp2_uart_config_port,
596 .verify_port = rp2_uart_verify_port,
597};
598
599static void rp2_reset_asic(struct rp2_card *card, unsigned int asic_id)
600{
601 void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id);
602 u32 clk_cfg;
603
604 writew(1, base + RP2_GLOBAL_CMD);
605 readw(base + RP2_GLOBAL_CMD);
606 msleep(100);
607 writel(0, base + RP2_CLK_PRESCALER);
608
609 /* TDM clock configuration */
610 clk_cfg = readw(base + RP2_ASIC_CFG);
611 clk_cfg = (clk_cfg & ~BIT(8)) | BIT(9);
612 writew(clk_cfg, base + RP2_ASIC_CFG);
613
614 /* IRQ routing */
615 writel(ALL_PORTS_MASK, base + RP2_CH_IRQ_MASK);
616 writel(RP2_ASIC_IRQ_EN_m, base + RP2_ASIC_IRQ);
617}
618
619static void rp2_init_card(struct rp2_card *card)
620{
621 writel(4, card->bar0 + RP2_FPGA_CTL0);
622 writel(0, card->bar0 + RP2_FPGA_CTL1);
623
624 rp2_reset_asic(card, 0);
625 if (card->n_ports >= PORTS_PER_ASIC)
626 rp2_reset_asic(card, 1);
627
628 writel(RP2_IRQ_MASK_EN_m, card->bar0 + RP2_IRQ_MASK);
629}
630
631static void rp2_init_port(struct rp2_uart_port *up, const struct firmware *fw)
632{
633 int i;
634
635 writel(RP2_UART_CTL_RESET_CH_m, up->base + RP2_UART_CTL);
636 readl(up->base + RP2_UART_CTL);
637 udelay(1);
638
639 writel(0, up->base + RP2_TXRX_CTL);
640 writel(0, up->base + RP2_UART_CTL);
641 readl(up->base + RP2_UART_CTL);
642 udelay(1);
643
644 rp2_flush_fifos(up);
645
646 for (i = 0; i < min_t(int, fw->size, RP2_UCODE_BYTES); i++)
647 writeb(fw->data[i], up->ucode + i);
648
649 __rp2_uart_set_termios(up, CS8 | CREAD | CLOCAL, 0, DEFAULT_BAUD_DIV);
650 rp2_uart_set_mctrl(&up->port, 0);
651
652 writeb(RP2_RX_FIFO_ena, up->ucode + RP2_RX_FIFO);
653 rp2_rmw(up, RP2_UART_CTL, RP2_UART_CTL_MODE_m,
654 RP2_UART_CTL_XMIT_EN_m | RP2_UART_CTL_MODE_rs232);
655 rp2_rmw_set(up, RP2_TXRX_CTL,
656 RP2_TXRX_CTL_TX_EN_m | RP2_TXRX_CTL_RX_EN_m);
657}
658
659static void rp2_remove_ports(struct rp2_card *card)
660{
661 int i;
662
663 for (i = 0; i < card->initialized_ports; i++)
664 uart_remove_one_port(&rp2_uart_driver, &card->ports[i].port);
665 card->initialized_ports = 0;
666}
667
668static void rp2_fw_cb(const struct firmware *fw, void *context)
669{
670 struct rp2_card *card = context;
671 resource_size_t phys_base;
672 int i, rc = -ENOENT;
673
674 if (!fw) {
675 dev_err(&card->pdev->dev, "cannot find '%s' firmware image\n",
676 RP2_FW_NAME);
677 goto no_fw;
678 }
679
680 phys_base = pci_resource_start(card->pdev, 1);
681
682 for (i = 0; i < card->n_ports; i++) {
683 struct rp2_uart_port *rp = &card->ports[i];
684 struct uart_port *p;
685 int j = (unsigned)i % PORTS_PER_ASIC;
686
687 rp->asic_base = card->bar1;
688 rp->base = card->bar1 + RP2_PORT_BASE + j*RP2_PORT_SPACING;
689 rp->ucode = card->bar1 + RP2_UCODE_BASE + j*RP2_UCODE_SPACING;
690 rp->card = card;
691 rp->idx = j;
692
693 p = &rp->port;
694 p->line = card->minor_start + i;
695 p->dev = &card->pdev->dev;
696 p->type = PORT_RP2;
697 p->iotype = UPIO_MEM32;
698 p->uartclk = UART_CLOCK;
699 p->regshift = 2;
700 p->fifosize = FIFO_SIZE;
701 p->ops = &rp2_uart_ops;
702 p->irq = card->pdev->irq;
703 p->membase = rp->base;
704 p->mapbase = phys_base + RP2_PORT_BASE + j*RP2_PORT_SPACING;
705
706 if (i >= PORTS_PER_ASIC) {
707 rp->asic_base += RP2_ASIC_SPACING;
708 rp->base += RP2_ASIC_SPACING;
709 rp->ucode += RP2_ASIC_SPACING;
710 p->mapbase += RP2_ASIC_SPACING;
711 }
712
713 rp2_init_port(rp, fw);
714 rc = uart_add_one_port(&rp2_uart_driver, p);
715 if (rc) {
716 dev_err(&card->pdev->dev,
717 "error registering port %d: %d\n", i, rc);
718 rp2_remove_ports(card);
719 break;
720 }
721 card->initialized_ports++;
722 }
723
724 release_firmware(fw);
725no_fw:
726 /*
727 * rp2_fw_cb() is called from a workqueue long after rp2_probe()
728 * has already returned success. So if something failed here,
729 * we'll just leave the now-dormant device in place until somebody
730 * unbinds it.
731 */
732 if (rc)
733 dev_warn(&card->pdev->dev, "driver initialization failed\n");
734
735 complete(&card->fw_loaded);
736}
737
738static int rp2_probe(struct pci_dev *pdev,
739 const struct pci_device_id *id)
740{
741 struct rp2_card *card;
742 struct rp2_uart_port *ports;
743 void __iomem * const *bars;
744 int rc;
745
746 card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL);
747 if (!card)
748 return -ENOMEM;
749 pci_set_drvdata(pdev, card);
750 spin_lock_init(&card->card_lock);
751 init_completion(&card->fw_loaded);
752
753 rc = pcim_enable_device(pdev);
754 if (rc)
755 return rc;
756
757 rc = pcim_iomap_regions_request_all(pdev, 0x03, DRV_NAME);
758 if (rc)
759 return rc;
760
761 bars = pcim_iomap_table(pdev);
762 card->bar0 = bars[0];
763 card->bar1 = bars[1];
764 card->pdev = pdev;
765
766 rp2_decode_cap(id, &card->n_ports, &card->smpte);
767 dev_info(&pdev->dev, "found new card with %d ports\n", card->n_ports);
768
769 card->minor_start = rp2_alloc_ports(card->n_ports);
770 if (card->minor_start < 0) {
771 dev_err(&pdev->dev,
772 "too many ports (try increasing CONFIG_SERIAL_RP2_NR_UARTS)\n");
773 return -EINVAL;
774 }
775
776 rp2_init_card(card);
777
778 ports = devm_kzalloc(&pdev->dev, sizeof(*ports) * card->n_ports,
779 GFP_KERNEL);
780 if (!ports)
781 return -ENOMEM;
782 card->ports = ports;
783
784 rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
785 IRQF_SHARED, DRV_NAME, card);
786 if (rc)
787 return rc;
788
789 /*
790 * Only catastrophic errors (e.g. ENOMEM) are reported here.
791 * If the FW image is missing, we'll find out in rp2_fw_cb()
792 * and print an error message.
793 */
794 rc = request_firmware_nowait(THIS_MODULE, 1, RP2_FW_NAME, &pdev->dev,
795 GFP_KERNEL, card, rp2_fw_cb);
796 if (rc)
797 return rc;
798 dev_dbg(&pdev->dev, "waiting for firmware blob...\n");
799
800 return 0;
801}
802
803static void rp2_remove(struct pci_dev *pdev)
804{
805 struct rp2_card *card = pci_get_drvdata(pdev);
806
807 wait_for_completion(&card->fw_loaded);
808 rp2_remove_ports(card);
809}
810
811static DEFINE_PCI_DEVICE_TABLE(rp2_pci_tbl) = {
812
813 /* RocketPort INFINITY cards */
814
815 { RP_ID(0x0040), RP_CAP(8, 0) }, /* INF Octa, RJ45, selectable */
816 { RP_ID(0x0041), RP_CAP(32, 0) }, /* INF 32, ext interface */
817 { RP_ID(0x0042), RP_CAP(8, 0) }, /* INF Octa, ext interface */
818 { RP_ID(0x0043), RP_CAP(16, 0) }, /* INF 16, ext interface */
819 { RP_ID(0x0044), RP_CAP(4, 0) }, /* INF Quad, DB, selectable */
820 { RP_ID(0x0045), RP_CAP(8, 0) }, /* INF Octa, DB, selectable */
821 { RP_ID(0x0046), RP_CAP(4, 0) }, /* INF Quad, ext interface */
822 { RP_ID(0x0047), RP_CAP(4, 0) }, /* INF Quad, RJ45 */
823 { RP_ID(0x004a), RP_CAP(4, 0) }, /* INF Plus, Quad */
824 { RP_ID(0x004b), RP_CAP(8, 0) }, /* INF Plus, Octa */
825 { RP_ID(0x004c), RP_CAP(8, 0) }, /* INF III, Octa */
826 { RP_ID(0x004d), RP_CAP(4, 0) }, /* INF III, Quad */
827 { RP_ID(0x004e), RP_CAP(2, 0) }, /* INF Plus, 2, RS232 */
828 { RP_ID(0x004f), RP_CAP(2, 1) }, /* INF Plus, 2, SMPTE */
829 { RP_ID(0x0050), RP_CAP(4, 0) }, /* INF Plus, Quad, RJ45 */
830 { RP_ID(0x0051), RP_CAP(8, 0) }, /* INF Plus, Octa, RJ45 */
831 { RP_ID(0x0052), RP_CAP(8, 1) }, /* INF Octa, SMPTE */
832
833 /* RocketPort EXPRESS cards */
834
835 { RP_ID(0x0060), RP_CAP(8, 0) }, /* EXP Octa, RJ45, selectable */
836 { RP_ID(0x0061), RP_CAP(32, 0) }, /* EXP 32, ext interface */
837 { RP_ID(0x0062), RP_CAP(8, 0) }, /* EXP Octa, ext interface */
838 { RP_ID(0x0063), RP_CAP(16, 0) }, /* EXP 16, ext interface */
839 { RP_ID(0x0064), RP_CAP(4, 0) }, /* EXP Quad, DB, selectable */
840 { RP_ID(0x0065), RP_CAP(8, 0) }, /* EXP Octa, DB, selectable */
841 { RP_ID(0x0066), RP_CAP(4, 0) }, /* EXP Quad, ext interface */
842 { RP_ID(0x0067), RP_CAP(4, 0) }, /* EXP Quad, RJ45 */
843 { RP_ID(0x0068), RP_CAP(8, 0) }, /* EXP Octa, RJ11 */
844 { RP_ID(0x0072), RP_CAP(8, 1) }, /* EXP Octa, SMPTE */
845 { }
846};
847MODULE_DEVICE_TABLE(pci, rp2_pci_tbl);
848
849static struct pci_driver rp2_pci_driver = {
850 .name = DRV_NAME,
851 .id_table = rp2_pci_tbl,
852 .probe = rp2_probe,
853 .remove = rp2_remove,
854};
855
856static int __init rp2_uart_init(void)
857{
858 int rc;
859
860 rc = uart_register_driver(&rp2_uart_driver);
861 if (rc)
862 return rc;
863
864 rc = pci_register_driver(&rp2_pci_driver);
865 if (rc) {
866 uart_unregister_driver(&rp2_uart_driver);
867 return rc;
868 }
869
870 return 0;
871}
872
873static void __exit rp2_uart_exit(void)
874{
875 pci_unregister_driver(&rp2_pci_driver);
876 uart_unregister_driver(&rp2_uart_driver);
877}
878
879module_init(rp2_uart_init);
880module_exit(rp2_uart_exit);
881
882MODULE_DESCRIPTION("Comtrol RocketPort EXPRESS/INFINITY driver");
883MODULE_AUTHOR("Kevin Cernekee <cernekee@gmail.com>");
884MODULE_LICENSE("GPL v2");
885MODULE_FIRMWARE(RP2_FW_NAME);
include/uapi/linux/serial_core.h+3−0
@@ -219,4 +219,7 @@ · 218 unmodified lines
219/* ARC (Synopsys) on-chip UART */219/* ARC (Synopsys) on-chip UART */
220#define PORT_ARC 101220#define PORT_ARC 101
221 221
222/* Rocketport EXPRESS/INFINITY */
223#define PORT_RP2 102
224
222#endif /* _UAPILINUX_SERIAL_CORE_H */225#endif /* _UAPILINUX_SERIAL_CORE_H */

Keyboard shortcuts

General

Show keyboard shortcuts
?
Focus the current search
/

Issues and pull requests

Open filters
f

Issues, pull requests and Inbox

Select next item
j↓
Select previous item
k↑
Open selected item
Enter
Dismiss filters or clear selection
Esc

Repository code

Go to file
t