History

mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQE

After system suspend, CQE is in cqhci_off state, which set the HALT bit, make CQE in HALT state. If the SoC do not power down the USDHC module, then when system resume back, this bit keep the same, still set. Though there is a sdhci reset during sdhci_resume_host(), but this reset do not impact the CQE part, so need to clear this bit when enable CQE, otherwise CQE will stuck in the first CMDQ request after system resume back. Find this issue on NXP i.MX845s-mek board [ 105.919862] mmc2: cqhci: timeout for tag 6 [ 105.923965] mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== [ 105.930407] mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 [ 105.936847] mmc2: cqhci: Config: 0x00001001 | Control: 0x00000001 [ 105.943286] mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 [ 105.949725] mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 [ 105.956164] mmc2: cqhci: TDL base: 0x7809b000 | TDL up32: 0x00000000 [ 105.962604] mmc2: cqhci: Doorbell: 0x00000040 | TCN: 0x00000000 [ 105.969043] mmc2: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000 [ 105.975483] mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 [ 105.981922] mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000000 [ 105.988362] mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 [ 105.994801] mmc2: cqhci: Resp idx: 0x00000000 | Resp arg: 0x00000000 [ 106.001240] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 106.007680] mmc2: sdhci: Sys addr: 0xb2b37800 | Version: 0x00000002 [ 106.014120] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001 [ 106.020560] mmc2: sdhci: Argument: 0x00010000 | Trn mode: 0x00000013 [ 106.026999] mmc2: sdhci: Present: 0x01f88008 | Host ctl: 0x00000030 [ 106.033439] mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 [ 106.039878] mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f [ 106.046318] mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 [ 106.052757] mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 [ 106.059196] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000502 [ 106.065635] mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 [ 106.072075] mmc2: sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff [ 106.078514] mmc2: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x31360181 [ 106.084954] mmc2: sdhci: Resp[2]: 0x44473430 | Resp[3]: 0x00450100 [ 106.091392] mmc2: sdhci: Host ctl2: 0x00000008 [ 106.095836] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7804b208 [ 106.102274] mmc2: sdhci: ============================================ [ 106.108785] mmc2: running CQE recovery

BOUGH CHEN committed 7 years ago

Commit 85236d21 parent 3a0681c1 file · +13 −0Browse files

Unified · Split

drivers/mmc/host/sdhci-esdhc-imx.c+13−0
@@ -1229,6 +1229,7 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host) · 1228 unmodified lines
1229static void esdhc_cqe_enable(struct mmc_host *mmc)1229static void esdhc_cqe_enable(struct mmc_host *mmc)
1230{1230{
1231 struct sdhci_host *host = mmc_priv(mmc);1231 struct sdhci_host *host = mmc_priv(mmc);
1232 struct cqhci_host *cq_host = mmc->cqe_private;
1232 u32 reg;1233 u32 reg;
1233 u16 mode;1234 u16 mode;
1234 int count = 10;1235 int count = 10;
@@ -1261,6 +1262,18 @@ static void esdhc_cqe_enable(struct mmc_host *mmc) · 26 unmodified lines
1261 mode |= SDHCI_TRNS_BLK_CNT_EN;1262 mode |= SDHCI_TRNS_BLK_CNT_EN;
1262 sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);1263 sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
1263 1264
1265 /*
1266 * Though Runtime resume reset the entire host controller,
1267 * but do not impact the CQHCI side, need to clear the
1268 * HALT bit, avoid CQHCI stuck in the first request when
1269 * system resume back.
1270 */
1271 cqhci_writel(cq_host, 0, CQHCI_CTL);
1272 if (cqhci_readl(cq_host, CQHCI_CTL) && CQHCI_HALT)
1273 dev_err(mmc_dev(host->mmc),
1274 "failed to exit halt state when enable CQE\n");
1275
1276
1264 sdhci_cqe_enable(mmc);1277 sdhci_cqe_enable(mmc);
1265}1278}
1266 1279

Keyboard shortcuts

General

Show keyboard shortcuts
?
Focus the current search
/

Issues and pull requests

Open filters
f

Issues, pull requests and Inbox

Select next item
j↓
Select previous item
k↑
Open selected item
Enter
Dismiss filters or clear selection
Esc

Repository code

Go to file
t