| @@ -0,0 +1,2514 @@ |
| | 1 | // SPDX-License-Identifier: GPL-2.0-only OR MIT |
| | 2 | /* |
| | 3 | * Bluetooth HCI driver for Broadcom 4377/4378/4387 devices attached via PCIe |
| | 4 | * |
| | 5 | * Copyright (C) The Asahi Linux Contributors |
| | 6 | */ |
| | 7 | |
| | 8 | #include <linux/async.h> |
| | 9 | #include <linux/bitfield.h> |
| | 10 | #include <linux/completion.h> |
| | 11 | #include <linux/dma-mapping.h> |
| | 12 | #include <linux/dmi.h> |
| | 13 | #include <linux/firmware.h> |
| | 14 | #include <linux/module.h> |
| | 15 | #include <linux/msi.h> |
| | 16 | #include <linux/of.h> |
| | 17 | #include <linux/pci.h> |
| | 18 | #include <linux/printk.h> |
| | 19 | |
| | 20 | #include <asm/unaligned.h> |
| | 21 | |
| | 22 | #include <net/bluetooth/bluetooth.h> |
| | 23 | #include <net/bluetooth/hci_core.h> |
| | 24 | |
| | 25 | enum bcm4377_chip { |
| | 26 | BCM4377 = 0, |
| | 27 | BCM4378, |
| | 28 | BCM4387, |
| | 29 | }; |
| | 30 | |
| | 31 | #define BCM4377_DEVICE_ID 0x5fa0 |
| | 32 | #define BCM4378_DEVICE_ID 0x5f69 |
| | 33 | #define BCM4387_DEVICE_ID 0x5f71 |
| | 34 | |
| | 35 | #define BCM4377_TIMEOUT 1000 |
| | 36 | |
| | 37 | /* |
| | 38 | * These devices only support DMA transactions inside a 32bit window |
| | 39 | * (possibly to avoid 64 bit arithmetic). The window size cannot exceed |
| | 40 | * 0xffffffff but is always aligned down to the previous 0x200 byte boundary |
| | 41 | * which effectively limits the window to [start, start+0xfffffe00]. |
| | 42 | * We just limit the DMA window to [0, 0xfffffe00] to make sure we don't |
| | 43 | * run into this limitation. |
| | 44 | */ |
| | 45 | #define BCM4377_DMA_MASK 0xfffffe00 |
| | 46 | |
| | 47 | #define BCM4377_PCIECFG_BAR0_WINDOW1 0x80 |
| | 48 | #define BCM4377_PCIECFG_BAR0_WINDOW2 0x70 |
| | 49 | #define BCM4377_PCIECFG_BAR0_CORE2_WINDOW1 0x74 |
| | 50 | #define BCM4377_PCIECFG_BAR0_CORE2_WINDOW2 0x78 |
| | 51 | #define BCM4377_PCIECFG_BAR2_WINDOW 0x84 |
| | 52 | |
| | 53 | #define BCM4377_PCIECFG_BAR0_CORE2_WINDOW1_DEFAULT 0x18011000 |
| | 54 | #define BCM4377_PCIECFG_BAR2_WINDOW_DEFAULT 0x19000000 |
| | 55 | |
| | 56 | #define BCM4377_PCIECFG_SUBSYSTEM_CTRL 0x88 |
| | 57 | |
| | 58 | #define BCM4377_BAR0_FW_DOORBELL 0x140 |
| | 59 | #define BCM4377_BAR0_RTI_CONTROL 0x144 |
| | 60 | |
| | 61 | #define BCM4377_BAR0_SLEEP_CONTROL 0x150 |
| | 62 | #define BCM4377_BAR0_SLEEP_CONTROL_UNQUIESCE 0 |
| | 63 | #define BCM4377_BAR0_SLEEP_CONTROL_AWAKE 2 |
| | 64 | #define BCM4377_BAR0_SLEEP_CONTROL_QUIESCE 3 |
| | 65 | |
| | 66 | #define BCM4377_BAR0_DOORBELL 0x174 |
| | 67 | #define BCM4377_BAR0_DOORBELL_VALUE GENMASK(31, 16) |
| | 68 | #define BCM4377_BAR0_DOORBELL_IDX GENMASK(15, 8) |
| | 69 | #define BCM4377_BAR0_DOORBELL_RING BIT(5) |
| | 70 | |
| | 71 | #define BCM4377_BAR0_HOST_WINDOW_LO 0x590 |
| | 72 | #define BCM4377_BAR0_HOST_WINDOW_HI 0x594 |
| | 73 | #define BCM4377_BAR0_HOST_WINDOW_SIZE 0x598 |
| | 74 | |
| | 75 | #define BCM4377_BAR2_BOOTSTAGE 0x200454 |
| | 76 | |
| | 77 | #define BCM4377_BAR2_FW_LO 0x200478 |
| | 78 | #define BCM4377_BAR2_FW_HI 0x20047c |
| | 79 | #define BCM4377_BAR2_FW_SIZE 0x200480 |
| | 80 | |
| | 81 | #define BCM4377_BAR2_CONTEXT_ADDR_LO 0x20048c |
| | 82 | #define BCM4377_BAR2_CONTEXT_ADDR_HI 0x200450 |
| | 83 | |
| | 84 | #define BCM4377_BAR2_RTI_STATUS 0x20045c |
| | 85 | #define BCM4377_BAR2_RTI_WINDOW_LO 0x200494 |
| | 86 | #define BCM4377_BAR2_RTI_WINDOW_HI 0x200498 |
| | 87 | #define BCM4377_BAR2_RTI_WINDOW_SIZE 0x20049c |
| | 88 | |
| | 89 | #define BCM4377_OTP_SIZE 0xe0 |
| | 90 | #define BCM4377_OTP_SYS_VENDOR 0x15 |
| | 91 | #define BCM4377_OTP_CIS 0x80 |
| | 92 | #define BCM4377_OTP_VENDOR_HDR 0x00000008 |
| | 93 | #define BCM4377_OTP_MAX_PARAM_LEN 16 |
| | 94 | |
| | 95 | #define BCM4377_N_TRANSFER_RINGS 9 |
| | 96 | #define BCM4377_N_COMPLETION_RINGS 6 |
| | 97 | |
| | 98 | #define BCM4377_MAX_RING_SIZE 256 |
| | 99 | |
| | 100 | #define BCM4377_MSGID_GENERATION GENMASK(15, 8) |
| | 101 | #define BCM4377_MSGID_ID GENMASK(7, 0) |
| | 102 | |
| | 103 | #define BCM4377_RING_N_ENTRIES 128 |
| | 104 | |
| | 105 | #define BCM4377_CONTROL_MSG_SIZE 0x34 |
| | 106 | #define BCM4377_XFER_RING_MAX_INPLACE_PAYLOAD_SIZE (4 * 0xff) |
| | 107 | |
| | 108 | #define MAX_ACL_PAYLOAD_SIZE (HCI_MAX_FRAME_SIZE + HCI_ACL_HDR_SIZE) |
| | 109 | #define MAX_SCO_PAYLOAD_SIZE (HCI_MAX_SCO_SIZE + HCI_SCO_HDR_SIZE) |
| | 110 | #define MAX_EVENT_PAYLOAD_SIZE (HCI_MAX_EVENT_SIZE + HCI_EVENT_HDR_SIZE) |
| | 111 | |
| | 112 | enum bcm4377_otp_params_type { |
| | 113 | BCM4377_OTP_BOARD_PARAMS, |
| | 114 | BCM4377_OTP_CHIP_PARAMS |
| | 115 | }; |
| | 116 | |
| | 117 | enum bcm4377_transfer_ring_id { |
| | 118 | BCM4377_XFER_RING_CONTROL = 0, |
| | 119 | BCM4377_XFER_RING_HCI_H2D = 1, |
| | 120 | BCM4377_XFER_RING_HCI_D2H = 2, |
| | 121 | BCM4377_XFER_RING_SCO_H2D = 3, |
| | 122 | BCM4377_XFER_RING_SCO_D2H = 4, |
| | 123 | BCM4377_XFER_RING_ACL_H2D = 5, |
| | 124 | BCM4377_XFER_RING_ACL_D2H = 6, |
| | 125 | }; |
| | 126 | |
| | 127 | enum bcm4377_completion_ring_id { |
| | 128 | BCM4377_ACK_RING_CONTROL = 0, |
| | 129 | BCM4377_ACK_RING_HCI_ACL = 1, |
| | 130 | BCM4377_EVENT_RING_HCI_ACL = 2, |
| | 131 | BCM4377_ACK_RING_SCO = 3, |
| | 132 | BCM4377_EVENT_RING_SCO = 4, |
| | 133 | }; |
| | 134 | |
| | 135 | enum bcm4377_doorbell { |
| | 136 | BCM4377_DOORBELL_CONTROL = 0, |
| | 137 | BCM4377_DOORBELL_HCI_H2D = 1, |
| | 138 | BCM4377_DOORBELL_HCI_D2H = 2, |
| | 139 | BCM4377_DOORBELL_ACL_H2D = 3, |
| | 140 | BCM4377_DOORBELL_ACL_D2H = 4, |
| | 141 | BCM4377_DOORBELL_SCO = 6, |
| | 142 | }; |
| | 143 | |
| | 144 | /* |
| | 145 | * Transfer ring entry |
| | 146 | * |
| | 147 | * flags: Flags to indicate if the payload is appended or mapped |
| | 148 | * len: Payload length |
| | 149 | * payload: Optional payload DMA address |
| | 150 | * id: Message id to recognize the answer in the completion ring entry |
| | 151 | */ |
| | 152 | struct bcm4377_xfer_ring_entry { |
| | 153 | #define BCM4377_XFER_RING_FLAG_PAYLOAD_MAPPED BIT(0) |
| | 154 | #define BCM4377_XFER_RING_FLAG_PAYLOAD_IN_FOOTER BIT(1) |
| | 155 | u8 flags; |
| | 156 | __le16 len; |
| | 157 | u8 _unk0; |
| | 158 | __le64 payload; |
| | 159 | __le16 id; |
| | 160 | u8 _unk1[2]; |
| | 161 | } __packed; |
| | 162 | static_assert(sizeof(struct bcm4377_xfer_ring_entry) == 0x10); |
| | 163 | |
| | 164 | /* |
| | 165 | * Completion ring entry |
| | 166 | * |
| | 167 | * flags: Flags to indicate if the payload is appended or mapped. If the payload |
| | 168 | * is mapped it can be found in the buffer of the corresponding transfer |
| | 169 | * ring message. |
| | 170 | * ring_id: Transfer ring ID which required this message |
| | 171 | * msg_id: Message ID specified in transfer ring entry |
| | 172 | * len: Payload length |
| | 173 | */ |
| | 174 | struct bcm4377_completion_ring_entry { |
| | 175 | u8 flags; |
| | 176 | u8 _unk0; |
| | 177 | __le16 ring_id; |
| | 178 | __le16 msg_id; |
| | 179 | __le32 len; |
| | 180 | u8 _unk1[6]; |
| | 181 | } __packed; |
| | 182 | static_assert(sizeof(struct bcm4377_completion_ring_entry) == 0x10); |
| | 183 | |
| | 184 | enum bcm4377_control_message_type { |
| | 185 | BCM4377_CONTROL_MSG_CREATE_XFER_RING = 1, |
| | 186 | BCM4377_CONTROL_MSG_CREATE_COMPLETION_RING = 2, |
| | 187 | BCM4377_CONTROL_MSG_DESTROY_XFER_RING = 3, |
| | 188 | BCM4377_CONTROL_MSG_DESTROY_COMPLETION_RING = 4, |
| | 189 | }; |
| | 190 | |
| | 191 | /* |
| | 192 | * Control message used to create a completion ring |
| | 193 | * |
| | 194 | * msg_type: Must be BCM4377_CONTROL_MSG_CREATE_COMPLETION_RING |
| | 195 | * header_size: Unknown, but probably reserved space in front of the entry |
| | 196 | * footer_size: Number of 32 bit words reserved for payloads after the entry |
| | 197 | * id/id_again: Completion ring index |
| | 198 | * ring_iova: DMA address of the ring buffer |
| | 199 | * n_elements: Number of elements inside the ring buffer |
| | 200 | * msi: MSI index, doesn't work for all rings though and should be zero |
| | 201 | * intmod_delay: Unknown delay |
| | 202 | * intmod_bytes: Unknown |
| | 203 | */ |
| | 204 | struct bcm4377_create_completion_ring_msg { |
| | 205 | u8 msg_type; |
| | 206 | u8 header_size; |
| | 207 | u8 footer_size; |
| | 208 | u8 _unk0; |
| | 209 | __le16 id; |
| | 210 | __le16 id_again; |
| | 211 | __le64 ring_iova; |
| | 212 | __le16 n_elements; |
| | 213 | __le32 unk; |
| | 214 | u8 _unk1[6]; |
| | 215 | __le16 msi; |
| | 216 | __le16 intmod_delay; |
| | 217 | __le32 intmod_bytes; |
| | 218 | __le16 _unk2; |
| | 219 | __le32 _unk3; |
| | 220 | u8 _unk4[10]; |
| | 221 | } __packed; |
| | 222 | static_assert(sizeof(struct bcm4377_create_completion_ring_msg) == |
| | 223 | BCM4377_CONTROL_MSG_SIZE); |
| | 224 | |
| | 225 | /* |
| | 226 | * Control ring message used to destroy a completion ring |
| | 227 | * |
| | 228 | * msg_type: Must be BCM4377_CONTROL_MSG_DESTROY_COMPLETION_RING |
| | 229 | * ring_id: Completion ring to be destroyed |
| | 230 | */ |
| | 231 | struct bcm4377_destroy_completion_ring_msg { |
| | 232 | u8 msg_type; |
| | 233 | u8 _pad0; |
| | 234 | __le16 ring_id; |
| | 235 | u8 _pad1[48]; |
| | 236 | } __packed; |
| | 237 | static_assert(sizeof(struct bcm4377_destroy_completion_ring_msg) == |
| | 238 | BCM4377_CONTROL_MSG_SIZE); |
| | 239 | |
| | 240 | /* |
| | 241 | * Control message used to create a transfer ring |
| | 242 | * |
| | 243 | * msg_type: Must be BCM4377_CONTROL_MSG_CREATE_XFER_RING |
| | 244 | * header_size: Number of 32 bit words reserved for unknown content before the |
| | 245 | * entry |
| | 246 | * footer_size: Number of 32 bit words reserved for payloads after the entry |
| | 247 | * ring_id/ring_id_again: Transfer ring index |
| | 248 | * ring_iova: DMA address of the ring buffer |
| | 249 | * n_elements: Number of elements inside the ring buffer |
| | 250 | * completion_ring_id: Completion ring index for acknowledgements and events |
| | 251 | * doorbell: Doorbell index used to notify device of new entries |
| | 252 | * flags: Transfer ring flags |
| | 253 | * - virtual: set if there is no associated shared memory and only the |
| | 254 | * corresponding completion ring is used |
| | 255 | * - sync: only set for the SCO rings |
| | 256 | */ |
| | 257 | struct bcm4377_create_transfer_ring_msg { |
| | 258 | u8 msg_type; |
| | 259 | u8 header_size; |
| | 260 | u8 footer_size; |
| | 261 | u8 _unk0; |
| | 262 | __le16 ring_id; |
| | 263 | __le16 ring_id_again; |
| | 264 | __le64 ring_iova; |
| | 265 | u8 _unk1[8]; |
| | 266 | __le16 n_elements; |
| | 267 | __le16 completion_ring_id; |
| | 268 | __le16 doorbell; |
| | 269 | #define BCM4377_XFER_RING_FLAG_VIRTUAL BIT(7) |
| | 270 | #define BCM4377_XFER_RING_FLAG_SYNC BIT(8) |
| | 271 | __le16 flags; |
| | 272 | u8 _unk2[20]; |
| | 273 | } __packed; |
| | 274 | static_assert(sizeof(struct bcm4377_create_transfer_ring_msg) == |
| | 275 | BCM4377_CONTROL_MSG_SIZE); |
| | 276 | |
| | 277 | /* |
| | 278 | * Control ring message used to destroy a transfer ring |
| | 279 | * |
| | 280 | * msg_type: Must be BCM4377_CONTROL_MSG_DESTROY_XFER_RING |
| | 281 | * ring_id: Transfer ring to be destroyed |
| | 282 | */ |
| | 283 | struct bcm4377_destroy_transfer_ring_msg { |
| | 284 | u8 msg_type; |
| | 285 | u8 _pad0; |
| | 286 | __le16 ring_id; |
| | 287 | u8 _pad1[48]; |
| | 288 | } __packed; |
| | 289 | static_assert(sizeof(struct bcm4377_destroy_transfer_ring_msg) == |
| | 290 | BCM4377_CONTROL_MSG_SIZE); |
| | 291 | |
| | 292 | /* |
| | 293 | * "Converged IPC" context struct used to make the device aware of all other |
| | 294 | * shared memory structures. A pointer to this structure is configured inside a |
| | 295 | * MMIO register. |
| | 296 | * |
| | 297 | * version: Protocol version, must be 2. |
| | 298 | * size: Size of this structure, must be 0x68. |
| | 299 | * enabled_caps: Enabled capabilities. Unknown bitfield but should be 2. |
| | 300 | * peripheral_info_addr: DMA address for a 0x20 buffer to which the device will |
| | 301 | * write unknown contents |
| | 302 | * {completion,xfer}_ring_{tails,heads}_addr: DMA pointers to ring heads/tails |
| | 303 | * n_completion_rings: Number of completion rings, the firmware only works if |
| | 304 | * this is set to BCM4377_N_COMPLETION_RINGS. |
| | 305 | * n_xfer_rings: Number of transfer rings, the firmware only works if |
| | 306 | * this is set to BCM4377_N_TRANSFER_RINGS. |
| | 307 | * control_completion_ring_addr: Control completion ring buffer DMA address |
| | 308 | * control_xfer_ring_addr: Control transfer ring buffer DMA address |
| | 309 | * control_xfer_ring_n_entries: Number of control transfer ring entries |
| | 310 | * control_completion_ring_n_entries: Number of control completion ring entries |
| | 311 | * control_xfer_ring_doorbell: Control transfer ring doorbell |
| | 312 | * control_completion_ring_doorbell: Control completion ring doorbell, |
| | 313 | * must be set to 0xffff |
| | 314 | * control_xfer_ring_msi: Control completion ring MSI index, must be 0 |
| | 315 | * control_completion_ring_msi: Control completion ring MSI index, must be 0. |
| | 316 | * control_xfer_ring_header_size: Number of 32 bit words reserved in front of |
| | 317 | * every control transfer ring entry |
| | 318 | * control_xfer_ring_footer_size: Number of 32 bit words reserved after every |
| | 319 | * control transfer ring entry |
| | 320 | * control_completion_ring_header_size: Number of 32 bit words reserved in front |
| | 321 | * of every control completion ring entry |
| | 322 | * control_completion_ring_footer_size: Number of 32 bit words reserved after |
| | 323 | * every control completion ring entry |
| | 324 | * scratch_pad: Optional scratch pad DMA address |
| | 325 | * scratch_pad_size: Scratch pad size |
| | 326 | */ |
| | 327 | struct bcm4377_context { |
| | 328 | __le16 version; |
| | 329 | __le16 size; |
| | 330 | __le32 enabled_caps; |
| | 331 | |
| | 332 | __le64 peripheral_info_addr; |
| | 333 | |
| | 334 | /* ring heads and tails */ |
| | 335 | __le64 completion_ring_heads_addr; |
| | 336 | __le64 xfer_ring_tails_addr; |
| | 337 | __le64 completion_ring_tails_addr; |
| | 338 | __le64 xfer_ring_heads_addr; |
| | 339 | __le16 n_completion_rings; |
| | 340 | __le16 n_xfer_rings; |
| | 341 | |
| | 342 | /* control ring configuration */ |
| | 343 | __le64 control_completion_ring_addr; |
| | 344 | __le64 control_xfer_ring_addr; |
| | 345 | __le16 control_xfer_ring_n_entries; |
| | 346 | __le16 control_completion_ring_n_entries; |
| | 347 | __le16 control_xfer_ring_doorbell; |
| | 348 | __le16 control_completion_ring_doorbell; |
| | 349 | __le16 control_xfer_ring_msi; |
| | 350 | __le16 control_completion_ring_msi; |
| | 351 | u8 control_xfer_ring_header_size; |
| | 352 | u8 control_xfer_ring_footer_size; |
| | 353 | u8 control_completion_ring_header_size; |
| | 354 | u8 control_completion_ring_footer_size; |
| | 355 | |
| | 356 | __le16 _unk0; |
| | 357 | __le16 _unk1; |
| | 358 | |
| | 359 | __le64 scratch_pad; |
| | 360 | __le32 scratch_pad_size; |
| | 361 | |
| | 362 | __le32 _unk3; |
| | 363 | } __packed; |
| | 364 | static_assert(sizeof(struct bcm4377_context) == 0x68); |
| | 365 | |
| | 366 | #define BCM4378_CALIBRATION_CHUNK_SIZE 0xe6 |
| | 367 | struct bcm4378_hci_send_calibration_cmd { |
| | 368 | u8 unk; |
| | 369 | __le16 blocks_left; |
| | 370 | u8 data[BCM4378_CALIBRATION_CHUNK_SIZE]; |
| | 371 | } __packed; |
| | 372 | |
| | 373 | #define BCM4378_PTB_CHUNK_SIZE 0xcf |
| | 374 | struct bcm4378_hci_send_ptb_cmd { |
| | 375 | __le16 blocks_left; |
| | 376 | u8 data[BCM4378_PTB_CHUNK_SIZE]; |
| | 377 | } __packed; |
| | 378 | |
| | 379 | /* |
| | 380 | * Shared memory structure used to store the ring head and tail pointers. |
| | 381 | */ |
| | 382 | struct bcm4377_ring_state { |
| | 383 | __le16 completion_ring_head[BCM4377_N_COMPLETION_RINGS]; |
| | 384 | __le16 completion_ring_tail[BCM4377_N_COMPLETION_RINGS]; |
| | 385 | __le16 xfer_ring_head[BCM4377_N_TRANSFER_RINGS]; |
| | 386 | __le16 xfer_ring_tail[BCM4377_N_TRANSFER_RINGS]; |
| | 387 | }; |
| | 388 | |
| | 389 | /* |
| | 390 | * A transfer ring can be used in two configurations: |
| | 391 | * 1) Send control or HCI messages to the device which are then acknowledged |
| | 392 | * in the corresponding completion ring |
| | 393 | * 2) Receiving HCI frames from the devices. In this case the transfer ring |
| | 394 | * itself contains empty messages that are acknowledged once data is |
| | 395 | * available from the device. If the payloads fit inside the footers |
| | 396 | * of the completion ring the transfer ring can be configured to be |
| | 397 | * virtual such that it has no ring buffer. |
| | 398 | * |
| | 399 | * ring_id: ring index hardcoded in the firmware |
| | 400 | * doorbell: doorbell index to notify device of new entries |
| | 401 | * payload_size: optional in-place payload size |
| | 402 | * mapped_payload_size: optional out-of-place payload size |
| | 403 | * completion_ring: index of corresponding completion ring |
| | 404 | * n_entries: number of entries inside this ring |
| | 405 | * generation: ring generation; incremented on hci_open to detect stale messages |
| | 406 | * sync: set to true for SCO rings |
| | 407 | * virtual: set to true if this ring has no entries and is just required to |
| | 408 | * setup a corresponding completion ring for device->host messages |
| | 409 | * d2h_buffers_only: set to true if this ring is only used to provide large |
| | 410 | * buffers used by device->host messages in the completion |
| | 411 | * ring |
| | 412 | * allow_wait: allow to wait for messages to be acknowledged |
| | 413 | * enabled: true once the ring has been created and can be used |
| | 414 | * ring: ring buffer for entries (struct bcm4377_xfer_ring_entry) |
| | 415 | * ring_dma: DMA address for ring entry buffer |
| | 416 | * payloads: payload buffer for mapped_payload_size payloads |
| | 417 | * payloads_dma:DMA address for payload buffer |
| | 418 | * events: pointer to array of completions if waiting is allowed |
| | 419 | * msgids: bitmap to keep track of used message ids |
| | 420 | * lock: Spinlock to protect access to ring structurs used in the irq handler |
| | 421 | */ |
| | 422 | struct bcm4377_transfer_ring { |
| | 423 | enum bcm4377_transfer_ring_id ring_id; |
| | 424 | enum bcm4377_doorbell doorbell; |
| | 425 | size_t payload_size; |
| | 426 | size_t mapped_payload_size; |
| | 427 | u8 completion_ring; |
| | 428 | u16 n_entries; |
| | 429 | u8 generation; |
| | 430 | |
| | 431 | bool sync; |
| | 432 | bool virtual; |
| | 433 | bool d2h_buffers_only; |
| | 434 | bool allow_wait; |
| | 435 | bool enabled; |
| | 436 | |
| | 437 | void *ring; |
| | 438 | dma_addr_t ring_dma; |
| | 439 | |
| | 440 | void *payloads; |
| | 441 | dma_addr_t payloads_dma; |
| | 442 | |
| | 443 | struct completion **events; |
| | 444 | DECLARE_BITMAP(msgids, BCM4377_MAX_RING_SIZE); |
| | 445 | spinlock_t lock; |
| | 446 | }; |
| | 447 | |
| | 448 | /* |
| | 449 | * A completion ring can be either used to either acknowledge messages sent in |
| | 450 | * the corresponding transfer ring or to receive messages associated with the |
| | 451 | * transfer ring. When used to receive messages the transfer ring either |
| | 452 | * has no ring buffer and is only advanced ("virtual transfer ring") or it |
| | 453 | * only contains empty DMA buffers to be used for the payloads. |
| | 454 | * |
| | 455 | * ring_id: completion ring id, hardcoded in firmware |
| | 456 | * payload_size: optional payload size after each entry |
| | 457 | * delay: unknown delay |
| | 458 | * n_entries: number of entries in this ring |
| | 459 | * enabled: true once the ring has been created and can be used |
| | 460 | * ring: ring buffer for entries (struct bcm4377_completion_ring_entry) |
| | 461 | * ring_dma: DMA address of ring buffer |
| | 462 | * transfer_rings: bitmap of corresponding transfer ring ids |
| | 463 | */ |
| | 464 | struct bcm4377_completion_ring { |
| | 465 | enum bcm4377_completion_ring_id ring_id; |
| | 466 | u16 payload_size; |
| | 467 | u16 delay; |
| | 468 | u16 n_entries; |
| | 469 | bool enabled; |
| | 470 | |
| | 471 | void *ring; |
| | 472 | dma_addr_t ring_dma; |
| | 473 | |
| | 474 | unsigned long transfer_rings; |
| | 475 | }; |
| | 476 | |
| | 477 | struct bcm4377_data; |
| | 478 | |
| | 479 | /* |
| | 480 | * Chip-specific configuration struct |
| | 481 | * |
| | 482 | * id: Chip id (e.g. 0x4377 for BCM4377) |
| | 483 | * otp_offset: Offset to the start of the OTP inside BAR0 |
| | 484 | * bar0_window1: Backplane address mapped to the first window in BAR0 |
| | 485 | * bar0_window2: Backplane address mapped to the second window in BAR0 |
| | 486 | * bar0_core2_window2: Optional backplane address mapped to the second core's |
| | 487 | * second window in BAR0 |
| | 488 | * has_bar0_core2_window2: Set to true if this chip requires the second core's |
| | 489 | * second window to be configured |
| | 490 | * clear_pciecfg_subsystem_ctrl_bit19: Set to true if bit 19 in the |
| | 491 | * vendor-specific subsystem control |
| | 492 | * register has to be cleared |
| | 493 | * disable_aspm: Set to true if ASPM must be disabled due to hardware errata |
| | 494 | * broken_ext_scan: Set to true if the chip erroneously claims to support |
| | 495 | * extended scanning |
| | 496 | * broken_mws_transport_config: Set to true if the chip erroneously claims to |
| | 497 | * support MWS Transport Configuration |
| | 498 | * send_calibration: Optional callback to send calibration data |
| | 499 | * send_ptb: Callback to send "PTB" regulatory/calibration data |
| | 500 | */ |
| | 501 | struct bcm4377_hw { |
| | 502 | unsigned int id; |
| | 503 | |
| | 504 | u32 otp_offset; |
| | 505 | |
| | 506 | u32 bar0_window1; |
| | 507 | u32 bar0_window2; |
| | 508 | u32 bar0_core2_window2; |
| | 509 | |
| | 510 | unsigned long has_bar0_core2_window2 : 1; |
| | 511 | unsigned long clear_pciecfg_subsystem_ctrl_bit19 : 1; |
| | 512 | unsigned long disable_aspm : 1; |
| | 513 | unsigned long broken_ext_scan : 1; |
| | 514 | unsigned long broken_mws_transport_config : 1; |
| | 515 | |
| | 516 | int (*send_calibration)(struct bcm4377_data *bcm4377); |
| | 517 | int (*send_ptb)(struct bcm4377_data *bcm4377, |
| | 518 | const struct firmware *fw); |
| | 519 | }; |
| | 520 | |
| | 521 | static const struct bcm4377_hw bcm4377_hw_variants[]; |
| | 522 | static const struct dmi_system_id bcm4377_dmi_board_table[]; |
| | 523 | |
| | 524 | /* |
| | 525 | * Private struct associated with each device containing global state |
| | 526 | * |
| | 527 | * pdev: Pointer to associated struct pci_dev |
| | 528 | * hdev: Pointer to associated strucy hci_dev |
| | 529 | * bar0: iomem pointing to BAR0 |
| | 530 | * bar1: iomem pointing to BAR2 |
| | 531 | * bootstage: Current value of the bootstage |
| | 532 | * rti_status: Current "RTI" status value |
| | 533 | * hw: Pointer to chip-specific struct bcm4377_hw |
| | 534 | * taurus_cal_blob: "Taurus" calibration blob used for some chips |
| | 535 | * taurus_cal_size: "Taurus" calibration blob size |
| | 536 | * taurus_beamforming_cal_blob: "Taurus" beamforming calibration blob used for |
| | 537 | * some chips |
| | 538 | * taurus_beamforming_cal_size: "Taurus" beamforming calibration blob size |
| | 539 | * stepping: Chip stepping read from OTP; used for firmware selection |
| | 540 | * vendor: Antenna vendor read from OTP; used for firmware selection |
| | 541 | * board_type: Board type from FDT or DMI match; used for firmware selection |
| | 542 | * event: Event for changed bootstage or rti_status; used for booting firmware |
| | 543 | * ctx: "Converged IPC" context |
| | 544 | * ctx_dma: "Converged IPC" context DMA address |
| | 545 | * ring_state: Shared memory buffer containing ring head and tail indexes |
| | 546 | * ring_state_dma: DMA address for ring_state |
| | 547 | * {control,hci_acl,sco}_ack_ring: Completion rings used to acknowledge messages |
| | 548 | * {hci_acl,sco}_event_ring: Completion rings used for device->host messages |
| | 549 | * control_h2d_ring: Transfer ring used for control messages |
| | 550 | * {hci,sco,acl}_h2d_ring: Transfer ring used to transfer HCI frames |
| | 551 | * {hci,sco,acl}_d2h_ring: Transfer ring used to receive HCI frames in the |
| | 552 | * corresponding completion ring |
| | 553 | */ |
| | 554 | struct bcm4377_data { |
| | 555 | struct pci_dev *pdev; |
| | 556 | struct hci_dev *hdev; |
| | 557 | |
| | 558 | void __iomem *bar0; |
| | 559 | void __iomem *bar2; |
| | 560 | |
| | 561 | u32 bootstage; |
| | 562 | u32 rti_status; |
| | 563 | |
| | 564 | const struct bcm4377_hw *hw; |
| | 565 | |
| | 566 | const void *taurus_cal_blob; |
| | 567 | int taurus_cal_size; |
| | 568 | const void *taurus_beamforming_cal_blob; |
| | 569 | int taurus_beamforming_cal_size; |
| | 570 | |
| | 571 | char stepping[BCM4377_OTP_MAX_PARAM_LEN]; |
| | 572 | char vendor[BCM4377_OTP_MAX_PARAM_LEN]; |
| | 573 | const char *board_type; |
| | 574 | |
| | 575 | struct completion event; |
| | 576 | |
| | 577 | struct bcm4377_context *ctx; |
| | 578 | dma_addr_t ctx_dma; |
| | 579 | |
| | 580 | struct bcm4377_ring_state *ring_state; |
| | 581 | dma_addr_t ring_state_dma; |
| | 582 | |
| | 583 | /* |
| | 584 | * The HCI and ACL rings have to be merged because this structure is |
| | 585 | * hardcoded in the firmware. |
| | 586 | */ |
| | 587 | struct bcm4377_completion_ring control_ack_ring; |
| | 588 | struct bcm4377_completion_ring hci_acl_ack_ring; |
| | 589 | struct bcm4377_completion_ring hci_acl_event_ring; |
| | 590 | struct bcm4377_completion_ring sco_ack_ring; |
| | 591 | struct bcm4377_completion_ring sco_event_ring; |
| | 592 | |
| | 593 | struct bcm4377_transfer_ring control_h2d_ring; |
| | 594 | struct bcm4377_transfer_ring hci_h2d_ring; |
| | 595 | struct bcm4377_transfer_ring hci_d2h_ring; |
| | 596 | struct bcm4377_transfer_ring sco_h2d_ring; |
| | 597 | struct bcm4377_transfer_ring sco_d2h_ring; |
| | 598 | struct bcm4377_transfer_ring acl_h2d_ring; |
| | 599 | struct bcm4377_transfer_ring acl_d2h_ring; |
| | 600 | }; |
| | 601 | |
| | 602 | static void bcm4377_ring_doorbell(struct bcm4377_data *bcm4377, u8 doorbell, |
| | 603 | u16 val) |
| | 604 | { |
| | 605 | u32 db = 0; |
| | 606 | |
| | 607 | db |= FIELD_PREP(BCM4377_BAR0_DOORBELL_VALUE, val); |
| | 608 | db |= FIELD_PREP(BCM4377_BAR0_DOORBELL_IDX, doorbell); |
| | 609 | db |= BCM4377_BAR0_DOORBELL_RING; |
| | 610 | |
| | 611 | dev_dbg(&bcm4377->pdev->dev, "write %d to doorbell #%d (0x%x)\n", val, |
| | 612 | doorbell, db); |
| | 613 | iowrite32(db, bcm4377->bar0 + BCM4377_BAR0_DOORBELL); |
| | 614 | } |
| | 615 | |
| | 616 | static int bcm4377_extract_msgid(struct bcm4377_data *bcm4377, |
| | 617 | struct bcm4377_transfer_ring *ring, |
| | 618 | u16 raw_msgid, u8 *msgid) |
| | 619 | { |
| | 620 | u8 generation = FIELD_GET(BCM4377_MSGID_GENERATION, raw_msgid); |
| | 621 | *msgid = FIELD_GET(BCM4377_MSGID_ID, raw_msgid); |
| | 622 | |
| | 623 | if (generation != ring->generation) { |
| | 624 | dev_warn( |
| | 625 | &bcm4377->pdev->dev, |
| | 626 | "invalid message generation %d should be %d in entry for ring %d\n", |
| | 627 | generation, ring->generation, ring->ring_id); |
| | 628 | return -EINVAL; |
| | 629 | } |
| | 630 | |
| | 631 | if (*msgid >= ring->n_entries) { |
| | 632 | dev_warn(&bcm4377->pdev->dev, |
| | 633 | "invalid message id in entry for ring %d: %d > %d\n", |
| | 634 | ring->ring_id, *msgid, ring->n_entries); |
| | 635 | return -EINVAL; |
| | 636 | } |
| | 637 | |
| | 638 | return 0; |
| | 639 | } |
| | 640 | |
| | 641 | static void bcm4377_handle_event(struct bcm4377_data *bcm4377, |
| | 642 | struct bcm4377_transfer_ring *ring, |
| | 643 | u16 raw_msgid, u8 entry_flags, u8 type, |
| | 644 | void *payload, size_t len) |
| | 645 | { |
| | 646 | struct sk_buff *skb; |
| | 647 | u16 head; |
| | 648 | u8 msgid; |
| | 649 | unsigned long flags; |
| | 650 | |
| | 651 | spin_lock_irqsave(&ring->lock, flags); |
| | 652 | if (!ring->enabled) { |
| | 653 | dev_warn(&bcm4377->pdev->dev, |
| | 654 | "event for disabled transfer ring %d\n", |
| | 655 | ring->ring_id); |
| | 656 | goto out; |
| | 657 | } |
| | 658 | |
| | 659 | if (ring->d2h_buffers_only && |
| | 660 | entry_flags & BCM4377_XFER_RING_FLAG_PAYLOAD_MAPPED) { |
| | 661 | if (bcm4377_extract_msgid(bcm4377, ring, raw_msgid, &msgid)) |
| | 662 | goto out; |
| | 663 | |
| | 664 | if (len > ring->mapped_payload_size) { |
| | 665 | dev_warn( |
| | 666 | &bcm4377->pdev->dev, |
| | 667 | "invalid payload len in event for ring %d: %zu > %zu\n", |
| | 668 | ring->ring_id, len, ring->mapped_payload_size); |
| | 669 | goto out; |
| | 670 | } |
| | 671 | |
| | 672 | payload = ring->payloads + msgid * ring->mapped_payload_size; |
| | 673 | } |
| | 674 | |
| | 675 | skb = bt_skb_alloc(len, GFP_ATOMIC); |
| | 676 | if (!skb) |
| | 677 | goto out; |
| | 678 | |
| | 679 | memcpy(skb_put(skb, len), payload, len); |
| | 680 | hci_skb_pkt_type(skb) = type; |
| | 681 | hci_recv_frame(bcm4377->hdev, skb); |
| | 682 | |
| | 683 | out: |
| | 684 | head = le16_to_cpu(bcm4377->ring_state->xfer_ring_head[ring->ring_id]); |
| | 685 | head = (head + 1) % ring->n_entries; |
| | 686 | bcm4377->ring_state->xfer_ring_head[ring->ring_id] = cpu_to_le16(head); |
| | 687 | |
| | 688 | bcm4377_ring_doorbell(bcm4377, ring->doorbell, head); |
| | 689 | |
| | 690 | spin_unlock_irqrestore(&ring->lock, flags); |
| | 691 | } |
| | 692 | |
| | 693 | static void bcm4377_handle_ack(struct bcm4377_data *bcm4377, |
| | 694 | struct bcm4377_transfer_ring *ring, |
| | 695 | u16 raw_msgid) |
| | 696 | { |
| | 697 | unsigned long flags; |
| | 698 | u8 msgid; |
| | 699 | |
| | 700 | spin_lock_irqsave(&ring->lock, flags); |
| | 701 | |
| | 702 | if (bcm4377_extract_msgid(bcm4377, ring, raw_msgid, &msgid)) |
| | 703 | goto unlock; |
| | 704 | |
| | 705 | if (!test_bit(msgid, ring->msgids)) { |
| | 706 | dev_warn( |
| | 707 | &bcm4377->pdev->dev, |
| | 708 | "invalid message id in ack for ring %d: %d is not used\n", |
| | 709 | ring->ring_id, msgid); |
| | 710 | goto unlock; |
| | 711 | } |
| | 712 | |
| | 713 | if (ring->allow_wait && ring->events[msgid]) { |
| | 714 | complete(ring->events[msgid]); |
| | 715 | ring->events[msgid] = NULL; |
| | 716 | } |
| | 717 | |
| | 718 | bitmap_release_region(ring->msgids, msgid, ring->n_entries); |
| | 719 | |
| | 720 | unlock: |
| | 721 | spin_unlock_irqrestore(&ring->lock, flags); |
| | 722 | } |
| | 723 | |
| | 724 | static void bcm4377_handle_completion(struct bcm4377_data *bcm4377, |
| | 725 | struct bcm4377_completion_ring *ring, |
| | 726 | u16 pos) |
| | 727 | { |
| | 728 | struct bcm4377_completion_ring_entry *entry; |
| | 729 | u16 msg_id, transfer_ring; |
| | 730 | size_t entry_size, data_len; |
| | 731 | void *data; |
| | 732 | |
| | 733 | if (pos >= ring->n_entries) { |
| | 734 | dev_warn(&bcm4377->pdev->dev, |
| | 735 | "invalid offset %d for completion ring %d\n", pos, |
| | 736 | ring->ring_id); |
| | 737 | return; |
| | 738 | } |
| | 739 | |
| | 740 | entry_size = sizeof(*entry) + ring->payload_size; |
| | 741 | entry = ring->ring + pos * entry_size; |
| | 742 | data = ring->ring + pos * entry_size + sizeof(*entry); |
| | 743 | data_len = le32_to_cpu(entry->len); |
| | 744 | msg_id = le16_to_cpu(entry->msg_id); |
| | 745 | transfer_ring = le16_to_cpu(entry->ring_id); |
| | 746 | |
| | 747 | if ((ring->transfer_rings & BIT(transfer_ring)) == 0) { |
| | 748 | dev_warn( |
| | 749 | &bcm4377->pdev->dev, |
| | 750 | "invalid entry at offset %d for transfer ring %d in completion ring %d\n", |
| | 751 | pos, transfer_ring, ring->ring_id); |
| | 752 | return; |
| | 753 | } |
| | 754 | |
| | 755 | dev_dbg(&bcm4377->pdev->dev, |
| | 756 | "entry in completion ring %d for transfer ring %d with msg_id %d\n", |
| | 757 | ring->ring_id, transfer_ring, msg_id); |
| | 758 | |
| | 759 | switch (transfer_ring) { |
| | 760 | case BCM4377_XFER_RING_CONTROL: |
| | 761 | bcm4377_handle_ack(bcm4377, &bcm4377->control_h2d_ring, msg_id); |
| | 762 | break; |
| | 763 | case BCM4377_XFER_RING_HCI_H2D: |
| | 764 | bcm4377_handle_ack(bcm4377, &bcm4377->hci_h2d_ring, msg_id); |
| | 765 | break; |
| | 766 | case BCM4377_XFER_RING_SCO_H2D: |
| | 767 | bcm4377_handle_ack(bcm4377, &bcm4377->sco_h2d_ring, msg_id); |
| | 768 | break; |
| | 769 | case BCM4377_XFER_RING_ACL_H2D: |
| | 770 | bcm4377_handle_ack(bcm4377, &bcm4377->acl_h2d_ring, msg_id); |
| | 771 | break; |
| | 772 | |
| | 773 | case BCM4377_XFER_RING_HCI_D2H: |
| | 774 | bcm4377_handle_event(bcm4377, &bcm4377->hci_d2h_ring, msg_id, |
| | 775 | entry->flags, HCI_EVENT_PKT, data, |
| | 776 | data_len); |
| | 777 | break; |
| | 778 | case BCM4377_XFER_RING_SCO_D2H: |
| | 779 | bcm4377_handle_event(bcm4377, &bcm4377->sco_d2h_ring, msg_id, |
| | 780 | entry->flags, HCI_SCODATA_PKT, data, |
| | 781 | data_len); |
| | 782 | break; |
| | 783 | case BCM4377_XFER_RING_ACL_D2H: |
| | 784 | bcm4377_handle_event(bcm4377, &bcm4377->acl_d2h_ring, msg_id, |
| | 785 | entry->flags, HCI_ACLDATA_PKT, data, |
| | 786 | data_len); |
| | 787 | break; |
| | 788 | |
| | 789 | default: |
| | 790 | dev_warn( |
| | 791 | &bcm4377->pdev->dev, |
| | 792 | "entry in completion ring %d for unknown transfer ring %d with msg_id %d\n", |
| | 793 | ring->ring_id, transfer_ring, msg_id); |
| | 794 | } |
| | 795 | } |
| | 796 | |
| | 797 | static void bcm4377_poll_completion_ring(struct bcm4377_data *bcm4377, |
| | 798 | struct bcm4377_completion_ring *ring) |
| | 799 | { |
| | 800 | u16 tail; |
| | 801 | __le16 *heads = bcm4377->ring_state->completion_ring_head; |
| | 802 | __le16 *tails = bcm4377->ring_state->completion_ring_tail; |
| | 803 | |
| | 804 | if (!ring->enabled) |
| | 805 | return; |
| | 806 | |
| | 807 | tail = le16_to_cpu(tails[ring->ring_id]); |
| | 808 | dev_dbg(&bcm4377->pdev->dev, |
| | 809 | "completion ring #%d: head: %d, tail: %d\n", ring->ring_id, |
| | 810 | le16_to_cpu(heads[ring->ring_id]), tail); |
| | 811 | |
| | 812 | while (tail != le16_to_cpu(READ_ONCE(heads[ring->ring_id]))) { |
| | 813 | /* |
| | 814 | * ensure the CPU doesn't speculate through the comparison. |
| | 815 | * otherwise it might already read the (empty) queue entry |
| | 816 | * before the updated head has been loaded and checked. |
| | 817 | */ |
| | 818 | dma_rmb(); |
| | 819 | |
| | 820 | bcm4377_handle_completion(bcm4377, ring, tail); |
| | 821 | |
| | 822 | tail = (tail + 1) % ring->n_entries; |
| | 823 | tails[ring->ring_id] = cpu_to_le16(tail); |
| | 824 | } |
| | 825 | } |
| | 826 | |
| | 827 | static irqreturn_t bcm4377_irq(int irq, void *data) |
| | 828 | { |
| | 829 | struct bcm4377_data *bcm4377 = data; |
| | 830 | u32 bootstage, rti_status; |
| | 831 | |
| | 832 | bootstage = ioread32(bcm4377->bar2 + BCM4377_BAR2_BOOTSTAGE); |
| | 833 | rti_status = ioread32(bcm4377->bar2 + BCM4377_BAR2_RTI_STATUS); |
| | 834 | |
| | 835 | if (bootstage != bcm4377->bootstage || |
| | 836 | rti_status != bcm4377->rti_status) { |
| | 837 | dev_dbg(&bcm4377->pdev->dev, |
| | 838 | "bootstage = %d -> %d, rti state = %d -> %d\n", |
| | 839 | bcm4377->bootstage, bootstage, bcm4377->rti_status, |
| | 840 | rti_status); |
| | 841 | complete(&bcm4377->event); |
| | 842 | bcm4377->bootstage = bootstage; |
| | 843 | bcm4377->rti_status = rti_status; |
| | 844 | } |
| | 845 | |
| | 846 | if (rti_status > 2) |
| | 847 | dev_err(&bcm4377->pdev->dev, "RTI status is %d\n", rti_status); |
| | 848 | |
| | 849 | bcm4377_poll_completion_ring(bcm4377, &bcm4377->control_ack_ring); |
| | 850 | bcm4377_poll_completion_ring(bcm4377, &bcm4377->hci_acl_event_ring); |
| | 851 | bcm4377_poll_completion_ring(bcm4377, &bcm4377->hci_acl_ack_ring); |
| | 852 | bcm4377_poll_completion_ring(bcm4377, &bcm4377->sco_ack_ring); |
| | 853 | bcm4377_poll_completion_ring(bcm4377, &bcm4377->sco_event_ring); |
| | 854 | |
| | 855 | return IRQ_HANDLED; |
| | 856 | } |
| | 857 | |
| | 858 | static int bcm4377_enqueue(struct bcm4377_data *bcm4377, |
| | 859 | struct bcm4377_transfer_ring *ring, void *data, |
| | 860 | size_t len, bool wait) |
| | 861 | { |
| | 862 | unsigned long flags; |
| | 863 | struct bcm4377_xfer_ring_entry *entry; |
| | 864 | void *payload; |
| | 865 | size_t offset; |
| | 866 | u16 head, tail, new_head; |
| | 867 | u16 raw_msgid; |
| | 868 | int ret, msgid; |
| | 869 | DECLARE_COMPLETION_ONSTACK(event); |
| | 870 | |
| | 871 | if (len > ring->payload_size && len > ring->mapped_payload_size) { |
| | 872 | dev_warn( |
| | 873 | &bcm4377->pdev->dev, |
| | 874 | "payload len %zu is too large for ring %d (max is %zu or %zu)\n", |
| | 875 | len, ring->ring_id, ring->payload_size, |
| | 876 | ring->mapped_payload_size); |
| | 877 | return -EINVAL; |
| | 878 | } |
| | 879 | if (wait && !ring->allow_wait) |
| | 880 | return -EINVAL; |
| | 881 | if (ring->virtual) |
| | 882 | return -EINVAL; |
| | 883 | |
| | 884 | spin_lock_irqsave(&ring->lock, flags); |
| | 885 | |
| | 886 | head = le16_to_cpu(bcm4377->ring_state->xfer_ring_head[ring->ring_id]); |
| | 887 | tail = le16_to_cpu(bcm4377->ring_state->xfer_ring_tail[ring->ring_id]); |
| | 888 | |
| | 889 | new_head = (head + 1) % ring->n_entries; |
| | 890 | |
| | 891 | if (new_head == tail) { |
| | 892 | dev_warn(&bcm4377->pdev->dev, |
| | 893 | "can't send message because ring %d is full\n", |
| | 894 | ring->ring_id); |
| | 895 | ret = -EINVAL; |
| | 896 | goto out; |
| | 897 | } |
| | 898 | |
| | 899 | msgid = bitmap_find_free_region(ring->msgids, ring->n_entries, 0); |
| | 900 | if (msgid < 0) { |
| | 901 | dev_warn(&bcm4377->pdev->dev, |
| | 902 | "can't find message id for ring %d\n", ring->ring_id); |
| | 903 | ret = -EINVAL; |
| | 904 | goto out; |
| | 905 | } |
| | 906 | |
| | 907 | raw_msgid = FIELD_PREP(BCM4377_MSGID_GENERATION, ring->generation); |
| | 908 | raw_msgid |= FIELD_PREP(BCM4377_MSGID_ID, msgid); |
| | 909 | |
| | 910 | offset = head * (sizeof(*entry) + ring->payload_size); |
| | 911 | entry = ring->ring + offset; |
| | 912 | |
| | 913 | memset(entry, 0, sizeof(*entry)); |
| | 914 | entry->id = cpu_to_le16(raw_msgid); |
| | 915 | entry->len = cpu_to_le16(len); |
| | 916 | |
| | 917 | if (len <= ring->payload_size) { |
| | 918 | entry->flags = BCM4377_XFER_RING_FLAG_PAYLOAD_IN_FOOTER; |
| | 919 | payload = ring->ring + offset + sizeof(*entry); |
| | 920 | } else { |
| | 921 | entry->flags = BCM4377_XFER_RING_FLAG_PAYLOAD_MAPPED; |
| | 922 | entry->payload = cpu_to_le64(ring->payloads_dma + |
| | 923 | msgid * ring->mapped_payload_size); |
| | 924 | payload = ring->payloads + msgid * ring->mapped_payload_size; |
| | 925 | } |
| | 926 | |
| | 927 | memcpy(payload, data, len); |
| | 928 | |
| | 929 | if (wait) |
| | 930 | ring->events[msgid] = &event; |
| | 931 | |
| | 932 | /* |
| | 933 | * The 4377 chips stop responding to any commands as soon as they |
| | 934 | * have been idle for a while. Poking the sleep control register here |
| | 935 | * makes them come alive again. |
| | 936 | */ |
| | 937 | iowrite32(BCM4377_BAR0_SLEEP_CONTROL_AWAKE, |
| | 938 | bcm4377->bar0 + BCM4377_BAR0_SLEEP_CONTROL); |
| | 939 | |
| | 940 | dev_dbg(&bcm4377->pdev->dev, |
| | 941 | "updating head for transfer queue #%d to %d\n", ring->ring_id, |
| | 942 | new_head); |
| | 943 | bcm4377->ring_state->xfer_ring_head[ring->ring_id] = |
| | 944 | cpu_to_le16(new_head); |
| | 945 | |
| | 946 | if (!ring->sync) |
| | 947 | bcm4377_ring_doorbell(bcm4377, ring->doorbell, new_head); |
| | 948 | ret = 0; |
| | 949 | |
| | 950 | out: |
| | 951 | spin_unlock_irqrestore(&ring->lock, flags); |
| | 952 | |
| | 953 | if (ret == 0 && wait) { |
| | 954 | ret = wait_for_completion_interruptible_timeout( |
| | 955 | &event, BCM4377_TIMEOUT); |
| | 956 | if (ret == 0) |
| | 957 | ret = -ETIMEDOUT; |
| | 958 | else if (ret > 0) |
| | 959 | ret = 0; |
| | 960 | |
| | 961 | spin_lock_irqsave(&ring->lock, flags); |
| | 962 | ring->events[msgid] = NULL; |
| | 963 | spin_unlock_irqrestore(&ring->lock, flags); |
| | 964 | } |
| | 965 | |
| | 966 | return ret; |
| | 967 | } |
| | 968 | |
| | 969 | static int bcm4377_create_completion_ring(struct bcm4377_data *bcm4377, |
| | 970 | struct bcm4377_completion_ring *ring) |
| | 971 | { |
| | 972 | struct bcm4377_create_completion_ring_msg msg; |
| | 973 | int ret; |
| | 974 | |
| | 975 | if (ring->enabled) { |
| | 976 | dev_warn(&bcm4377->pdev->dev, |
| | 977 | "completion ring %d already enabled\n", ring->ring_id); |
| | 978 | return 0; |
| | 979 | } |
| | 980 | |
| | 981 | memset(ring->ring, 0, |
| | 982 | ring->n_entries * (sizeof(struct bcm4377_completion_ring_entry) + |
| | 983 | ring->payload_size)); |
| | 984 | memset(&msg, 0, sizeof(msg)); |
| | 985 | msg.msg_type = BCM4377_CONTROL_MSG_CREATE_COMPLETION_RING; |
| | 986 | msg.id = cpu_to_le16(ring->ring_id); |
| | 987 | msg.id_again = cpu_to_le16(ring->ring_id); |
| | 988 | msg.ring_iova = cpu_to_le64(ring->ring_dma); |
| | 989 | msg.n_elements = cpu_to_le16(ring->n_entries); |
| | 990 | msg.intmod_bytes = cpu_to_le32(0xffffffff); |
| | 991 | msg.unk = cpu_to_le32(0xffffffff); |
| | 992 | msg.intmod_delay = cpu_to_le16(ring->delay); |
| | 993 | msg.footer_size = ring->payload_size / 4; |
| | 994 | |
| | 995 | ret = bcm4377_enqueue(bcm4377, &bcm4377->control_h2d_ring, &msg, |
| | 996 | sizeof(msg), true); |
| | 997 | if (!ret) |
| | 998 | ring->enabled = true; |
| | 999 | |
| | 1000 | return ret; |
| | 1001 | } |
| | 1002 | |
| | 1003 | static int bcm4377_destroy_completion_ring(struct bcm4377_data *bcm4377, |
| | 1004 | struct bcm4377_completion_ring *ring) |
| | 1005 | { |
| | 1006 | struct bcm4377_destroy_completion_ring_msg msg; |
| | 1007 | int ret; |
| | 1008 | |
| | 1009 | memset(&msg, 0, sizeof(msg)); |
| | 1010 | msg.msg_type = BCM4377_CONTROL_MSG_DESTROY_COMPLETION_RING; |
| | 1011 | msg.ring_id = cpu_to_le16(ring->ring_id); |
| | 1012 | |
| | 1013 | ret = bcm4377_enqueue(bcm4377, &bcm4377->control_h2d_ring, &msg, |
| | 1014 | sizeof(msg), true); |
| | 1015 | if (ret) |
| | 1016 | dev_warn(&bcm4377->pdev->dev, |
| | 1017 | "failed to destroy completion ring %d\n", |
| | 1018 | ring->ring_id); |
| | 1019 | |
| | 1020 | ring->enabled = false; |
| | 1021 | return ret; |
| | 1022 | } |
| | 1023 | |
| | 1024 | static int bcm4377_create_transfer_ring(struct bcm4377_data *bcm4377, |
| | 1025 | struct bcm4377_transfer_ring *ring) |
| | 1026 | { |
| | 1027 | struct bcm4377_create_transfer_ring_msg msg; |
| | 1028 | u16 flags = 0; |
| | 1029 | int ret, i; |
| | 1030 | unsigned long spinlock_flags; |
| | 1031 | |
| | 1032 | if (ring->virtual) |
| | 1033 | flags |= BCM4377_XFER_RING_FLAG_VIRTUAL; |
| | 1034 | if (ring->sync) |
| | 1035 | flags |= BCM4377_XFER_RING_FLAG_SYNC; |
| | 1036 | |
| | 1037 | spin_lock_irqsave(&ring->lock, spinlock_flags); |
| | 1038 | memset(&msg, 0, sizeof(msg)); |
| | 1039 | msg.msg_type = BCM4377_CONTROL_MSG_CREATE_XFER_RING; |
| | 1040 | msg.ring_id = cpu_to_le16(ring->ring_id); |
| | 1041 | msg.ring_id_again = cpu_to_le16(ring->ring_id); |
| | 1042 | msg.ring_iova = cpu_to_le64(ring->ring_dma); |
| | 1043 | msg.n_elements = cpu_to_le16(ring->n_entries); |
| | 1044 | msg.completion_ring_id = cpu_to_le16(ring->completion_ring); |
| | 1045 | msg.doorbell = cpu_to_le16(ring->doorbell); |
| | 1046 | msg.flags = cpu_to_le16(flags); |
| | 1047 | msg.footer_size = ring->payload_size / 4; |
| | 1048 | |
| | 1049 | bcm4377->ring_state->xfer_ring_head[ring->ring_id] = 0; |
| | 1050 | bcm4377->ring_state->xfer_ring_tail[ring->ring_id] = 0; |
| | 1051 | ring->generation++; |
| | 1052 | spin_unlock_irqrestore(&ring->lock, spinlock_flags); |
| | 1053 | |
| | 1054 | ret = bcm4377_enqueue(bcm4377, &bcm4377->control_h2d_ring, &msg, |
| | 1055 | sizeof(msg), true); |
| | 1056 | |
| | 1057 | spin_lock_irqsave(&ring->lock, spinlock_flags); |
| | 1058 | |
| | 1059 | if (ring->d2h_buffers_only) { |
| | 1060 | for (i = 0; i < ring->n_entries; ++i) { |
| | 1061 | struct bcm4377_xfer_ring_entry *entry = |
| | 1062 | ring->ring + i * sizeof(*entry); |
| | 1063 | u16 raw_msgid = FIELD_PREP(BCM4377_MSGID_GENERATION, |
| | 1064 | ring->generation); |
| | 1065 | raw_msgid |= FIELD_PREP(BCM4377_MSGID_ID, i); |
| | 1066 | |
| | 1067 | memset(entry, 0, sizeof(*entry)); |
| | 1068 | entry->id = cpu_to_le16(raw_msgid); |
| | 1069 | entry->len = cpu_to_le16(ring->mapped_payload_size); |
| | 1070 | entry->flags = BCM4377_XFER_RING_FLAG_PAYLOAD_MAPPED; |
| | 1071 | entry->payload = |
| | 1072 | cpu_to_le64(ring->payloads_dma + |
| | 1073 | i * ring->mapped_payload_size); |
| | 1074 | } |
| | 1075 | } |
| | 1076 | |
| | 1077 | /* |
| | 1078 | * send some messages if this is a device->host ring to allow the device |
| | 1079 | * to reply by acknowledging them in the completion ring |
| | 1080 | */ |
| | 1081 | if (ring->virtual || ring->d2h_buffers_only) { |
| | 1082 | bcm4377->ring_state->xfer_ring_head[ring->ring_id] = |
| | 1083 | cpu_to_le16(0xf); |
| | 1084 | bcm4377_ring_doorbell(bcm4377, ring->doorbell, 0xf); |
| | 1085 | } |
| | 1086 | |
| | 1087 | ring->enabled = true; |
| | 1088 | spin_unlock_irqrestore(&ring->lock, spinlock_flags); |
| | 1089 | |
| | 1090 | return ret; |
| | 1091 | } |
| | 1092 | |
| | 1093 | static int bcm4377_destroy_transfer_ring(struct bcm4377_data *bcm4377, |
| | 1094 | struct bcm4377_transfer_ring *ring) |
| | 1095 | { |
| | 1096 | struct bcm4377_destroy_transfer_ring_msg msg; |
| | 1097 | int ret; |
| | 1098 | |
| | 1099 | memset(&msg, 0, sizeof(msg)); |
| | 1100 | msg.msg_type = BCM4377_CONTROL_MSG_DESTROY_XFER_RING; |
| | 1101 | msg.ring_id = cpu_to_le16(ring->ring_id); |
| | 1102 | |
| | 1103 | ret = bcm4377_enqueue(bcm4377, &bcm4377->control_h2d_ring, &msg, |
| | 1104 | sizeof(msg), true); |
| | 1105 | if (ret) |
| | 1106 | dev_warn(&bcm4377->pdev->dev, |
| | 1107 | "failed to destroy transfer ring %d\n", ring->ring_id); |
| | 1108 | |
| | 1109 | ring->enabled = false; |
| | 1110 | return ret; |
| | 1111 | } |
| | 1112 | |
| | 1113 | static int __bcm4378_send_calibration_chunk(struct bcm4377_data *bcm4377, |
| | 1114 | const void *data, size_t data_len, |
| | 1115 | u16 blocks_left) |
| | 1116 | { |
| | 1117 | struct bcm4378_hci_send_calibration_cmd cmd; |
| | 1118 | struct sk_buff *skb; |
| | 1119 | |
| | 1120 | if (data_len > sizeof(cmd.data)) |
| | 1121 | return -EINVAL; |
| | 1122 | |
| | 1123 | memset(&cmd, 0, sizeof(cmd)); |
| | 1124 | cmd.unk = 0x03; |
| | 1125 | cmd.blocks_left = cpu_to_le16(blocks_left); |
| | 1126 | memcpy(cmd.data, data, data_len); |
| | 1127 | |
| | 1128 | skb = __hci_cmd_sync(bcm4377->hdev, 0xfd97, sizeof(cmd), &cmd, |
| | 1129 | HCI_INIT_TIMEOUT); |
| | 1130 | if (IS_ERR(skb)) |
| | 1131 | return PTR_ERR(skb); |
| | 1132 | |
| | 1133 | kfree_skb(skb); |
| | 1134 | return 0; |
| | 1135 | } |
| | 1136 | |
| | 1137 | static int __bcm4378_send_calibration(struct bcm4377_data *bcm4377, |
| | 1138 | const void *data, size_t data_size) |
| | 1139 | { |
| | 1140 | int ret; |
| | 1141 | size_t i, left, transfer_len; |
| | 1142 | size_t blocks = |
| | 1143 | DIV_ROUND_UP(data_size, (size_t)BCM4378_CALIBRATION_CHUNK_SIZE); |
| | 1144 | |
| | 1145 | if (!data) { |
| | 1146 | dev_err(&bcm4377->pdev->dev, |
| | 1147 | "no calibration data available.\n"); |
| | 1148 | return -ENOENT; |
| | 1149 | } |
| | 1150 | |
| | 1151 | for (i = 0, left = data_size; i < blocks; ++i, left -= transfer_len) { |
| | 1152 | transfer_len = |
| | 1153 | min_t(size_t, left, BCM4378_CALIBRATION_CHUNK_SIZE); |
| | 1154 | |
| | 1155 | ret = __bcm4378_send_calibration_chunk( |
| | 1156 | bcm4377, data + i * BCM4378_CALIBRATION_CHUNK_SIZE, |
| | 1157 | transfer_len, blocks - i - 1); |
| | 1158 | if (ret) { |
| | 1159 | dev_err(&bcm4377->pdev->dev, |
| | 1160 | "send calibration chunk failed with %d\n", ret); |
| | 1161 | return ret; |
| | 1162 | } |
| | 1163 | } |
| | 1164 | |
| | 1165 | return 0; |
| | 1166 | } |
| | 1167 | |
| | 1168 | static int bcm4378_send_calibration(struct bcm4377_data *bcm4377) |
| | 1169 | { |
| | 1170 | if ((strcmp(bcm4377->stepping, "b1") == 0) || |
| | 1171 | strcmp(bcm4377->stepping, "b3") == 0) |
| | 1172 | return __bcm4378_send_calibration( |
| | 1173 | bcm4377, bcm4377->taurus_beamforming_cal_blob, |
| | 1174 | bcm4377->taurus_beamforming_cal_size); |
| | 1175 | else |
| | 1176 | return __bcm4378_send_calibration(bcm4377, |
| | 1177 | bcm4377->taurus_cal_blob, |
| | 1178 | bcm4377->taurus_cal_size); |
| | 1179 | } |
| | 1180 | |
| | 1181 | static int bcm4387_send_calibration(struct bcm4377_data *bcm4377) |
| | 1182 | { |
| | 1183 | if (strcmp(bcm4377->stepping, "c2") == 0) |
| | 1184 | return __bcm4378_send_calibration( |
| | 1185 | bcm4377, bcm4377->taurus_beamforming_cal_blob, |
| | 1186 | bcm4377->taurus_beamforming_cal_size); |
| | 1187 | else |
| | 1188 | return __bcm4378_send_calibration(bcm4377, |
| | 1189 | bcm4377->taurus_cal_blob, |
| | 1190 | bcm4377->taurus_cal_size); |
| | 1191 | } |
| | 1192 | |
| | 1193 | static const struct firmware *bcm4377_request_blob(struct bcm4377_data *bcm4377, |
| | 1194 | const char *suffix) |
| | 1195 | { |
| | 1196 | const struct firmware *fw; |
| | 1197 | char name0[64], name1[64]; |
| | 1198 | int ret; |
| | 1199 | |
| | 1200 | snprintf(name0, sizeof(name0), "brcm/brcmbt%04x%s-%s-%s.%s", |
| | 1201 | bcm4377->hw->id, bcm4377->stepping, bcm4377->board_type, |
| | 1202 | bcm4377->vendor, suffix); |
| | 1203 | snprintf(name1, sizeof(name1), "brcm/brcmbt%04x%s-%s.%s", |
| | 1204 | bcm4377->hw->id, bcm4377->stepping, bcm4377->board_type, |
| | 1205 | suffix); |
| | 1206 | dev_dbg(&bcm4377->pdev->dev, "Trying to load firmware: '%s' or '%s'\n", |
| | 1207 | name0, name1); |
| | 1208 | |
| | 1209 | ret = firmware_request_nowarn(&fw, name0, &bcm4377->pdev->dev); |
| | 1210 | if (!ret) |
| | 1211 | return fw; |
| | 1212 | ret = firmware_request_nowarn(&fw, name1, &bcm4377->pdev->dev); |
| | 1213 | if (!ret) |
| | 1214 | return fw; |
| | 1215 | |
| | 1216 | dev_err(&bcm4377->pdev->dev, |
| | 1217 | "Unable to load firmware; tried '%s' and '%s'\n", name0, name1); |
| | 1218 | return NULL; |
| | 1219 | } |
| | 1220 | |
| | 1221 | static int bcm4377_send_ptb(struct bcm4377_data *bcm4377, |
| | 1222 | const struct firmware *fw) |
| | 1223 | { |
| | 1224 | struct sk_buff *skb; |
| | 1225 | |
| | 1226 | skb = __hci_cmd_sync(bcm4377->hdev, 0xfd98, fw->size, fw->data, |
| | 1227 | HCI_INIT_TIMEOUT); |
| | 1228 | /* |
| | 1229 | * This command seems to always fail on more recent firmware versions |
| | 1230 | * (even in traces taken from the macOS driver). It's unclear why this |
| | 1231 | * happens but because the PTB file contains calibration and/or |
| | 1232 | * regulatory data and may be required on older firmware we still try to |
| | 1233 | * send it here just in case and just ignore if it fails. |
| | 1234 | */ |
| | 1235 | if (!IS_ERR(skb)) |
| | 1236 | kfree_skb(skb); |
| | 1237 | return 0; |
| | 1238 | } |
| | 1239 | |
| | 1240 | static int bcm4378_send_ptb_chunk(struct bcm4377_data *bcm4377, |
| | 1241 | const void *data, size_t data_len, |
| | 1242 | u16 blocks_left) |
| | 1243 | { |
| | 1244 | struct bcm4378_hci_send_ptb_cmd cmd; |
| | 1245 | struct sk_buff *skb; |
| | 1246 | |
| | 1247 | if (data_len > BCM4378_PTB_CHUNK_SIZE) |
| | 1248 | return -EINVAL; |
| | 1249 | |
| | 1250 | memset(&cmd, 0, sizeof(cmd)); |
| | 1251 | cmd.blocks_left = cpu_to_le16(blocks_left); |
| | 1252 | memcpy(cmd.data, data, data_len); |
| | 1253 | |
| | 1254 | skb = __hci_cmd_sync(bcm4377->hdev, 0xfe0d, sizeof(cmd), &cmd, |
| | 1255 | HCI_INIT_TIMEOUT); |
| | 1256 | if (IS_ERR(skb)) |
| | 1257 | return PTR_ERR(skb); |
| | 1258 | |
| | 1259 | kfree_skb(skb); |
| | 1260 | return 0; |
| | 1261 | } |
| | 1262 | |
| | 1263 | static int bcm4378_send_ptb(struct bcm4377_data *bcm4377, |
| | 1264 | const struct firmware *fw) |
| | 1265 | { |
| | 1266 | size_t chunks = DIV_ROUND_UP(fw->size, (size_t)BCM4378_PTB_CHUNK_SIZE); |
| | 1267 | size_t i, left, transfer_len; |
| | 1268 | int ret; |
| | 1269 | |
| | 1270 | for (i = 0, left = fw->size; i < chunks; ++i, left -= transfer_len) { |
| | 1271 | transfer_len = min_t(size_t, left, BCM4378_PTB_CHUNK_SIZE); |
| | 1272 | |
| | 1273 | dev_dbg(&bcm4377->pdev->dev, "sending ptb chunk %zu/%zu\n", |
| | 1274 | i + 1, chunks); |
| | 1275 | ret = bcm4378_send_ptb_chunk( |
| | 1276 | bcm4377, fw->data + i * BCM4378_PTB_CHUNK_SIZE, |
| | 1277 | transfer_len, chunks - i - 1); |
| | 1278 | if (ret) { |
| | 1279 | dev_err(&bcm4377->pdev->dev, |
| | 1280 | "sending ptb chunk %zu failed (%d)", i, ret); |
| | 1281 | return ret; |
| | 1282 | } |
| | 1283 | } |
| | 1284 | |
| | 1285 | return 0; |
| | 1286 | } |
| | 1287 | |
| | 1288 | static int bcm4377_hci_open(struct hci_dev *hdev) |
| | 1289 | { |
| | 1290 | struct bcm4377_data *bcm4377 = hci_get_drvdata(hdev); |
| | 1291 | int ret; |
| | 1292 | |
| | 1293 | dev_dbg(&bcm4377->pdev->dev, "creating rings\n"); |
| | 1294 | |
| | 1295 | ret = bcm4377_create_completion_ring(bcm4377, |
| | 1296 | &bcm4377->hci_acl_ack_ring); |
| | 1297 | if (ret) |
| | 1298 | return ret; |
| | 1299 | ret = bcm4377_create_completion_ring(bcm4377, |
| | 1300 | &bcm4377->hci_acl_event_ring); |
| | 1301 | if (ret) |
| | 1302 | goto destroy_hci_acl_ack; |
| | 1303 | ret = bcm4377_create_completion_ring(bcm4377, &bcm4377->sco_ack_ring); |
| | 1304 | if (ret) |
| | 1305 | goto destroy_hci_acl_event; |
| | 1306 | ret = bcm4377_create_completion_ring(bcm4377, &bcm4377->sco_event_ring); |
| | 1307 | if (ret) |
| | 1308 | goto destroy_sco_ack; |
| | 1309 | dev_dbg(&bcm4377->pdev->dev, |
| | 1310 | "all completion rings successfully created!\n"); |
| | 1311 | |
| | 1312 | ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->hci_h2d_ring); |
| | 1313 | if (ret) |
| | 1314 | goto destroy_sco_event; |
| | 1315 | ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->hci_d2h_ring); |
| | 1316 | if (ret) |
| | 1317 | goto destroy_hci_h2d; |
| | 1318 | ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->sco_h2d_ring); |
| | 1319 | if (ret) |
| | 1320 | goto destroy_hci_d2h; |
| | 1321 | ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->sco_d2h_ring); |
| | 1322 | if (ret) |
| | 1323 | goto destroy_sco_h2d; |
| | 1324 | ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->acl_h2d_ring); |
| | 1325 | if (ret) |
| | 1326 | goto destroy_sco_d2h; |
| | 1327 | ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->acl_d2h_ring); |
| | 1328 | if (ret) |
| | 1329 | goto destroy_acl_h2d; |
| | 1330 | dev_dbg(&bcm4377->pdev->dev, |
| | 1331 | "all transfer rings successfully created!\n"); |
| | 1332 | |
| | 1333 | return 0; |
| | 1334 | |
| | 1335 | destroy_acl_h2d: |
| | 1336 | bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->acl_h2d_ring); |
| | 1337 | destroy_sco_d2h: |
| | 1338 | bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->sco_d2h_ring); |
| | 1339 | destroy_sco_h2d: |
| | 1340 | bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->sco_h2d_ring); |
| | 1341 | destroy_hci_d2h: |
| | 1342 | bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->hci_h2d_ring); |
| | 1343 | destroy_hci_h2d: |
| | 1344 | bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->hci_d2h_ring); |
| | 1345 | destroy_sco_event: |
| | 1346 | bcm4377_destroy_completion_ring(bcm4377, &bcm4377->sco_event_ring); |
| | 1347 | destroy_sco_ack: |
| | 1348 | bcm4377_destroy_completion_ring(bcm4377, &bcm4377->sco_ack_ring); |
| | 1349 | destroy_hci_acl_event: |
| | 1350 | bcm4377_destroy_completion_ring(bcm4377, &bcm4377->hci_acl_event_ring); |
| | 1351 | destroy_hci_acl_ack: |
| | 1352 | bcm4377_destroy_completion_ring(bcm4377, &bcm4377->hci_acl_ack_ring); |
| | 1353 | |
| | 1354 | dev_err(&bcm4377->pdev->dev, "Creating rings failed with %d\n", ret); |
| | 1355 | return ret; |
| | 1356 | } |
| | 1357 | |
| | 1358 | static int bcm4377_hci_close(struct hci_dev *hdev) |
| | 1359 | { |
| | 1360 | struct bcm4377_data *bcm4377 = hci_get_drvdata(hdev); |
| | 1361 | |
| | 1362 | dev_dbg(&bcm4377->pdev->dev, "destroying rings in hci_close\n"); |
| | 1363 | |
| | 1364 | bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->acl_d2h_ring); |
| | 1365 | bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->acl_h2d_ring); |
| | 1366 | bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->sco_d2h_ring); |
| | 1367 | bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->sco_h2d_ring); |
| | 1368 | bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->hci_d2h_ring); |
| | 1369 | bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->hci_h2d_ring); |
| | 1370 | |
| | 1371 | bcm4377_destroy_completion_ring(bcm4377, &bcm4377->sco_event_ring); |
| | 1372 | bcm4377_destroy_completion_ring(bcm4377, &bcm4377->sco_ack_ring); |
| | 1373 | bcm4377_destroy_completion_ring(bcm4377, &bcm4377->hci_acl_event_ring); |
| | 1374 | bcm4377_destroy_completion_ring(bcm4377, &bcm4377->hci_acl_ack_ring); |
| | 1375 | |
| | 1376 | return 0; |
| | 1377 | } |
| | 1378 | |
| | 1379 | static bool bcm4377_is_valid_bdaddr(struct bcm4377_data *bcm4377, |
| | 1380 | bdaddr_t *addr) |
| | 1381 | { |
| | 1382 | if (addr->b[0] != 0x93) |
| | 1383 | return true; |
| | 1384 | if (addr->b[1] != 0x76) |
| | 1385 | return true; |
| | 1386 | if (addr->b[2] != 0x00) |
| | 1387 | return true; |
| | 1388 | if (addr->b[4] != (bcm4377->hw->id & 0xff)) |
| | 1389 | return true; |
| | 1390 | if (addr->b[5] != (bcm4377->hw->id >> 8)) |
| | 1391 | return true; |
| | 1392 | return false; |
| | 1393 | } |
| | 1394 | |
| | 1395 | static int bcm4377_check_bdaddr(struct bcm4377_data *bcm4377) |
| | 1396 | { |
| | 1397 | struct hci_rp_read_bd_addr *bda; |
| | 1398 | struct sk_buff *skb; |
| | 1399 | |
| | 1400 | skb = __hci_cmd_sync(bcm4377->hdev, HCI_OP_READ_BD_ADDR, 0, NULL, |
| | 1401 | HCI_INIT_TIMEOUT); |
| | 1402 | if (IS_ERR(skb)) { |
| | 1403 | int err = PTR_ERR(skb); |
| | 1404 | |
| | 1405 | dev_err(&bcm4377->pdev->dev, "HCI_OP_READ_BD_ADDR failed (%d)", |
| | 1406 | err); |
| | 1407 | return err; |
| | 1408 | } |
| | 1409 | |
| | 1410 | if (skb->len != sizeof(*bda)) { |
| | 1411 | dev_err(&bcm4377->pdev->dev, |
| | 1412 | "HCI_OP_READ_BD_ADDR reply length invalid"); |
| | 1413 | kfree_skb(skb); |
| | 1414 | return -EIO; |
| | 1415 | } |
| | 1416 | |
| | 1417 | bda = (struct hci_rp_read_bd_addr *)skb->data; |
| | 1418 | if (!bcm4377_is_valid_bdaddr(bcm4377, &bda->bdaddr)) |
| | 1419 | set_bit(HCI_QUIRK_INVALID_BDADDR, &bcm4377->hdev->quirks); |
| | 1420 | |
| | 1421 | kfree_skb(skb); |
| | 1422 | return 0; |
| | 1423 | } |
| | 1424 | |
| | 1425 | static int bcm4377_hci_setup(struct hci_dev *hdev) |
| | 1426 | { |
| | 1427 | struct bcm4377_data *bcm4377 = hci_get_drvdata(hdev); |
| | 1428 | const struct firmware *fw; |
| | 1429 | int ret; |
| | 1430 | |
| | 1431 | if (bcm4377->hw->send_calibration) { |
| | 1432 | ret = bcm4377->hw->send_calibration(bcm4377); |
| | 1433 | if (ret) |
| | 1434 | return ret; |
| | 1435 | } |
| | 1436 | |
| | 1437 | fw = bcm4377_request_blob(bcm4377, "ptb"); |
| | 1438 | if (!fw) { |
| | 1439 | dev_err(&bcm4377->pdev->dev, "failed to load PTB data"); |
| | 1440 | return -ENOENT; |
| | 1441 | } |
| | 1442 | |
| | 1443 | ret = bcm4377->hw->send_ptb(bcm4377, fw); |
| | 1444 | release_firmware(fw); |
| | 1445 | if (ret) |
| | 1446 | return ret; |
| | 1447 | |
| | 1448 | return bcm4377_check_bdaddr(bcm4377); |
| | 1449 | } |
| | 1450 | |
| | 1451 | static int bcm4377_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb) |
| | 1452 | { |
| | 1453 | struct bcm4377_data *bcm4377 = hci_get_drvdata(hdev); |
| | 1454 | struct bcm4377_transfer_ring *ring; |
| | 1455 | int ret; |
| | 1456 | |
| | 1457 | switch (hci_skb_pkt_type(skb)) { |
| | 1458 | case HCI_COMMAND_PKT: |
| | 1459 | hdev->stat.cmd_tx++; |
| | 1460 | ring = &bcm4377->hci_h2d_ring; |
| | 1461 | break; |
| | 1462 | |
| | 1463 | case HCI_ACLDATA_PKT: |
| | 1464 | hdev->stat.acl_tx++; |
| | 1465 | ring = &bcm4377->acl_h2d_ring; |
| | 1466 | break; |
| | 1467 | |
| | 1468 | case HCI_SCODATA_PKT: |
| | 1469 | hdev->stat.sco_tx++; |
| | 1470 | ring = &bcm4377->sco_h2d_ring; |
| | 1471 | break; |
| | 1472 | |
| | 1473 | default: |
| | 1474 | return -EILSEQ; |
| | 1475 | } |
| | 1476 | |
| | 1477 | ret = bcm4377_enqueue(bcm4377, ring, skb->data, skb->len, false); |
| | 1478 | if (ret < 0) { |
| | 1479 | hdev->stat.err_tx++; |
| | 1480 | return ret; |
| | 1481 | } |
| | 1482 | |
| | 1483 | hdev->stat.byte_tx += skb->len; |
| | 1484 | kfree_skb(skb); |
| | 1485 | return ret; |
| | 1486 | } |
| | 1487 | |
| | 1488 | static int bcm4377_hci_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) |
| | 1489 | { |
| | 1490 | struct bcm4377_data *bcm4377 = hci_get_drvdata(hdev); |
| | 1491 | struct sk_buff *skb; |
| | 1492 | int err; |
| | 1493 | |
| | 1494 | skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT); |
| | 1495 | if (IS_ERR(skb)) { |
| | 1496 | err = PTR_ERR(skb); |
| | 1497 | dev_err(&bcm4377->pdev->dev, |
| | 1498 | "Change address command failed (%d)", err); |
| | 1499 | return err; |
| | 1500 | } |
| | 1501 | kfree_skb(skb); |
| | 1502 | |
| | 1503 | return 0; |
| | 1504 | } |
| | 1505 | |
| | 1506 | static int bcm4377_alloc_transfer_ring(struct bcm4377_data *bcm4377, |
| | 1507 | struct bcm4377_transfer_ring *ring) |
| | 1508 | { |
| | 1509 | size_t entry_size; |
| | 1510 | |
| | 1511 | spin_lock_init(&ring->lock); |
| | 1512 | ring->payload_size = ALIGN(ring->payload_size, 4); |
| | 1513 | ring->mapped_payload_size = ALIGN(ring->mapped_payload_size, 4); |
| | 1514 | |
| | 1515 | if (ring->payload_size > BCM4377_XFER_RING_MAX_INPLACE_PAYLOAD_SIZE) |
| | 1516 | return -EINVAL; |
| | 1517 | if (ring->n_entries > BCM4377_MAX_RING_SIZE) |
| | 1518 | return -EINVAL; |
| | 1519 | if (ring->virtual && ring->allow_wait) |
| | 1520 | return -EINVAL; |
| | 1521 | |
| | 1522 | if (ring->d2h_buffers_only) { |
| | 1523 | if (ring->virtual) |
| | 1524 | return -EINVAL; |
| | 1525 | if (ring->payload_size) |
| | 1526 | return -EINVAL; |
| | 1527 | if (!ring->mapped_payload_size) |
| | 1528 | return -EINVAL; |
| | 1529 | } |
| | 1530 | if (ring->virtual) |
| | 1531 | return 0; |
| | 1532 | |
| | 1533 | entry_size = |
| | 1534 | ring->payload_size + sizeof(struct bcm4377_xfer_ring_entry); |
| | 1535 | ring->ring = dmam_alloc_coherent(&bcm4377->pdev->dev, |
| | 1536 | ring->n_entries * entry_size, |
| | 1537 | &ring->ring_dma, GFP_KERNEL); |
| | 1538 | if (!ring->ring) |
| | 1539 | return -ENOMEM; |
| | 1540 | |
| | 1541 | if (ring->allow_wait) { |
| | 1542 | ring->events = devm_kcalloc(&bcm4377->pdev->dev, |
| | 1543 | ring->n_entries, |
| | 1544 | sizeof(*ring->events), GFP_KERNEL); |
| | 1545 | if (!ring->events) |
| | 1546 | return -ENOMEM; |
| | 1547 | } |
| | 1548 | |
| | 1549 | if (ring->mapped_payload_size) { |
| | 1550 | ring->payloads = dmam_alloc_coherent( |
| | 1551 | &bcm4377->pdev->dev, |
| | 1552 | ring->n_entries * ring->mapped_payload_size, |
| | 1553 | &ring->payloads_dma, GFP_KERNEL); |
| | 1554 | if (!ring->payloads) |
| | 1555 | return -ENOMEM; |
| | 1556 | } |
| | 1557 | |
| | 1558 | return 0; |
| | 1559 | } |
| | 1560 | |
| | 1561 | static int bcm4377_alloc_completion_ring(struct bcm4377_data *bcm4377, |
| | 1562 | struct bcm4377_completion_ring *ring) |
| | 1563 | { |
| | 1564 | size_t entry_size; |
| | 1565 | |
| | 1566 | ring->payload_size = ALIGN(ring->payload_size, 4); |
| | 1567 | if (ring->payload_size > BCM4377_XFER_RING_MAX_INPLACE_PAYLOAD_SIZE) |
| | 1568 | return -EINVAL; |
| | 1569 | if (ring->n_entries > BCM4377_MAX_RING_SIZE) |
| | 1570 | return -EINVAL; |
| | 1571 | |
| | 1572 | entry_size = ring->payload_size + |
| | 1573 | sizeof(struct bcm4377_completion_ring_entry); |
| | 1574 | |
| | 1575 | ring->ring = dmam_alloc_coherent(&bcm4377->pdev->dev, |
| | 1576 | ring->n_entries * entry_size, |
| | 1577 | &ring->ring_dma, GFP_KERNEL); |
| | 1578 | if (!ring->ring) |
| | 1579 | return -ENOMEM; |
| | 1580 | return 0; |
| | 1581 | } |
| | 1582 | |
| | 1583 | static int bcm4377_init_context(struct bcm4377_data *bcm4377) |
| | 1584 | { |
| | 1585 | struct device *dev = &bcm4377->pdev->dev; |
| | 1586 | dma_addr_t peripheral_info_dma; |
| | 1587 | |
| | 1588 | bcm4377->ctx = dmam_alloc_coherent(dev, sizeof(*bcm4377->ctx), |
| | 1589 | &bcm4377->ctx_dma, GFP_KERNEL); |
| | 1590 | if (!bcm4377->ctx) |
| | 1591 | return -ENOMEM; |
| | 1592 | memset(bcm4377->ctx, 0, sizeof(*bcm4377->ctx)); |
| | 1593 | |
| | 1594 | bcm4377->ring_state = |
| | 1595 | dmam_alloc_coherent(dev, sizeof(*bcm4377->ring_state), |
| | 1596 | &bcm4377->ring_state_dma, GFP_KERNEL); |
| | 1597 | if (!bcm4377->ring_state) |
| | 1598 | return -ENOMEM; |
| | 1599 | memset(bcm4377->ring_state, 0, sizeof(*bcm4377->ring_state)); |
| | 1600 | |
| | 1601 | bcm4377->ctx->version = cpu_to_le16(1); |
| | 1602 | bcm4377->ctx->size = cpu_to_le16(sizeof(*bcm4377->ctx)); |
| | 1603 | bcm4377->ctx->enabled_caps = cpu_to_le32(2); |
| | 1604 | |
| | 1605 | /* |
| | 1606 | * The BT device will write 0x20 bytes of data to this buffer but |
| | 1607 | * the exact contents are unknown. It only needs to exist for BT |
| | 1608 | * to work such that we can just allocate and then ignore it. |
| | 1609 | */ |
| | 1610 | if (!dmam_alloc_coherent(&bcm4377->pdev->dev, 0x20, |
| | 1611 | &peripheral_info_dma, GFP_KERNEL)) |
| | 1612 | return -ENOMEM; |
| | 1613 | bcm4377->ctx->peripheral_info_addr = cpu_to_le64(peripheral_info_dma); |
| | 1614 | |
| | 1615 | bcm4377->ctx->xfer_ring_heads_addr = cpu_to_le64( |
| | 1616 | bcm4377->ring_state_dma + |
| | 1617 | offsetof(struct bcm4377_ring_state, xfer_ring_head)); |
| | 1618 | bcm4377->ctx->xfer_ring_tails_addr = cpu_to_le64( |
| | 1619 | bcm4377->ring_state_dma + |
| | 1620 | offsetof(struct bcm4377_ring_state, xfer_ring_tail)); |
| | 1621 | bcm4377->ctx->completion_ring_heads_addr = cpu_to_le64( |
| | 1622 | bcm4377->ring_state_dma + |
| | 1623 | offsetof(struct bcm4377_ring_state, completion_ring_head)); |
| | 1624 | bcm4377->ctx->completion_ring_tails_addr = cpu_to_le64( |
| | 1625 | bcm4377->ring_state_dma + |
| | 1626 | offsetof(struct bcm4377_ring_state, completion_ring_tail)); |
| | 1627 | |
| | 1628 | bcm4377->ctx->n_completion_rings = |
| | 1629 | cpu_to_le16(BCM4377_N_COMPLETION_RINGS); |
| | 1630 | bcm4377->ctx->n_xfer_rings = cpu_to_le16(BCM4377_N_TRANSFER_RINGS); |
| | 1631 | |
| | 1632 | bcm4377->ctx->control_completion_ring_addr = |
| | 1633 | cpu_to_le64(bcm4377->control_ack_ring.ring_dma); |
| | 1634 | bcm4377->ctx->control_completion_ring_n_entries = |
| | 1635 | cpu_to_le16(bcm4377->control_ack_ring.n_entries); |
| | 1636 | bcm4377->ctx->control_completion_ring_doorbell = cpu_to_le16(0xffff); |
| | 1637 | bcm4377->ctx->control_completion_ring_msi = 0; |
| | 1638 | bcm4377->ctx->control_completion_ring_header_size = 0; |
| | 1639 | bcm4377->ctx->control_completion_ring_footer_size = 0; |
| | 1640 | |
| | 1641 | bcm4377->ctx->control_xfer_ring_addr = |
| | 1642 | cpu_to_le64(bcm4377->control_h2d_ring.ring_dma); |
| | 1643 | bcm4377->ctx->control_xfer_ring_n_entries = |
| | 1644 | cpu_to_le16(bcm4377->control_h2d_ring.n_entries); |
| | 1645 | bcm4377->ctx->control_xfer_ring_doorbell = |
| | 1646 | cpu_to_le16(bcm4377->control_h2d_ring.doorbell); |
| | 1647 | bcm4377->ctx->control_xfer_ring_msi = 0; |
| | 1648 | bcm4377->ctx->control_xfer_ring_header_size = 0; |
| | 1649 | bcm4377->ctx->control_xfer_ring_footer_size = |
| | 1650 | bcm4377->control_h2d_ring.payload_size / 4; |
| | 1651 | |
| | 1652 | dev_dbg(&bcm4377->pdev->dev, "context initialized at IOVA %pad", |
| | 1653 | &bcm4377->ctx_dma); |
| | 1654 | |
| | 1655 | return 0; |
| | 1656 | } |
| | 1657 | |
| | 1658 | static int bcm4377_prepare_rings(struct bcm4377_data *bcm4377) |
| | 1659 | { |
| | 1660 | int ret; |
| | 1661 | |
| | 1662 | /* |
| | 1663 | * Even though many of these settings appear to be configurable |
| | 1664 | * when sending the "create ring" messages most of these are |
| | 1665 | * actually hardcoded in some (and quite possibly all) firmware versions |
| | 1666 | * and changing them on the host has no effect. |
| | 1667 | * Specifically, this applies to at least the doorbells, the transfer |
| | 1668 | * and completion ring ids and their mapping (e.g. both HCI and ACL |
| | 1669 | * entries will always be queued in completion rings 1 and 2 no matter |
| | 1670 | * what we configure here). |
| | 1671 | */ |
| | 1672 | bcm4377->control_ack_ring.ring_id = BCM4377_ACK_RING_CONTROL; |
| | 1673 | bcm4377->control_ack_ring.n_entries = 32; |
| | 1674 | bcm4377->control_ack_ring.transfer_rings = |
| | 1675 | BIT(BCM4377_XFER_RING_CONTROL); |
| | 1676 | |
| | 1677 | bcm4377->hci_acl_ack_ring.ring_id = BCM4377_ACK_RING_HCI_ACL; |
| | 1678 | bcm4377->hci_acl_ack_ring.n_entries = 2 * BCM4377_RING_N_ENTRIES; |
| | 1679 | bcm4377->hci_acl_ack_ring.transfer_rings = |
| | 1680 | BIT(BCM4377_XFER_RING_HCI_H2D) | BIT(BCM4377_XFER_RING_ACL_H2D); |
| | 1681 | bcm4377->hci_acl_ack_ring.delay = 1000; |
| | 1682 | |
| | 1683 | /* |
| | 1684 | * A payload size of MAX_EVENT_PAYLOAD_SIZE is enough here since large |
| | 1685 | * ACL packets will be transmitted inside buffers mapped via |
| | 1686 | * acl_d2h_ring anyway. |
| | 1687 | */ |
| | 1688 | bcm4377->hci_acl_event_ring.ring_id = BCM4377_EVENT_RING_HCI_ACL; |
| | 1689 | bcm4377->hci_acl_event_ring.payload_size = MAX_EVENT_PAYLOAD_SIZE; |
| | 1690 | bcm4377->hci_acl_event_ring.n_entries = 2 * BCM4377_RING_N_ENTRIES; |
| | 1691 | bcm4377->hci_acl_event_ring.transfer_rings = |
| | 1692 | BIT(BCM4377_XFER_RING_HCI_D2H) | BIT(BCM4377_XFER_RING_ACL_D2H); |
| | 1693 | bcm4377->hci_acl_event_ring.delay = 1000; |
| | 1694 | |
| | 1695 | bcm4377->sco_ack_ring.ring_id = BCM4377_ACK_RING_SCO; |
| | 1696 | bcm4377->sco_ack_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| | 1697 | bcm4377->sco_ack_ring.transfer_rings = BIT(BCM4377_XFER_RING_SCO_H2D); |
| | 1698 | |
| | 1699 | bcm4377->sco_event_ring.ring_id = BCM4377_EVENT_RING_SCO; |
| | 1700 | bcm4377->sco_event_ring.payload_size = MAX_SCO_PAYLOAD_SIZE; |
| | 1701 | bcm4377->sco_event_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| | 1702 | bcm4377->sco_event_ring.transfer_rings = BIT(BCM4377_XFER_RING_SCO_D2H); |
| | 1703 | |
| | 1704 | bcm4377->control_h2d_ring.ring_id = BCM4377_XFER_RING_CONTROL; |
| | 1705 | bcm4377->control_h2d_ring.doorbell = BCM4377_DOORBELL_CONTROL; |
| | 1706 | bcm4377->control_h2d_ring.payload_size = BCM4377_CONTROL_MSG_SIZE; |
| | 1707 | bcm4377->control_h2d_ring.completion_ring = BCM4377_ACK_RING_CONTROL; |
| | 1708 | bcm4377->control_h2d_ring.allow_wait = true; |
| | 1709 | bcm4377->control_h2d_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| | 1710 | |
| | 1711 | bcm4377->hci_h2d_ring.ring_id = BCM4377_XFER_RING_HCI_H2D; |
| | 1712 | bcm4377->hci_h2d_ring.doorbell = BCM4377_DOORBELL_HCI_H2D; |
| | 1713 | bcm4377->hci_h2d_ring.payload_size = MAX_EVENT_PAYLOAD_SIZE; |
| | 1714 | bcm4377->hci_h2d_ring.completion_ring = BCM4377_ACK_RING_HCI_ACL; |
| | 1715 | bcm4377->hci_h2d_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| | 1716 | |
| | 1717 | bcm4377->hci_d2h_ring.ring_id = BCM4377_XFER_RING_HCI_D2H; |
| | 1718 | bcm4377->hci_d2h_ring.doorbell = BCM4377_DOORBELL_HCI_D2H; |
| | 1719 | bcm4377->hci_d2h_ring.completion_ring = BCM4377_EVENT_RING_HCI_ACL; |
| | 1720 | bcm4377->hci_d2h_ring.virtual = true; |
| | 1721 | bcm4377->hci_d2h_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| | 1722 | |
| | 1723 | bcm4377->sco_h2d_ring.ring_id = BCM4377_XFER_RING_SCO_H2D; |
| | 1724 | bcm4377->sco_h2d_ring.doorbell = BCM4377_DOORBELL_SCO; |
| | 1725 | bcm4377->sco_h2d_ring.payload_size = MAX_SCO_PAYLOAD_SIZE; |
| | 1726 | bcm4377->sco_h2d_ring.completion_ring = BCM4377_ACK_RING_SCO; |
| | 1727 | bcm4377->sco_h2d_ring.sync = true; |
| | 1728 | bcm4377->sco_h2d_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| | 1729 | |
| | 1730 | bcm4377->sco_d2h_ring.ring_id = BCM4377_XFER_RING_SCO_D2H; |
| | 1731 | bcm4377->sco_d2h_ring.doorbell = BCM4377_DOORBELL_SCO; |
| | 1732 | bcm4377->sco_d2h_ring.completion_ring = BCM4377_EVENT_RING_SCO; |
| | 1733 | bcm4377->sco_d2h_ring.virtual = true; |
| | 1734 | bcm4377->sco_d2h_ring.sync = true; |
| | 1735 | bcm4377->sco_d2h_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| | 1736 | |
| | 1737 | /* |
| | 1738 | * This ring has to use mapped_payload_size because the largest ACL |
| | 1739 | * packet doesn't fit inside the largest possible footer |
| | 1740 | */ |
| | 1741 | bcm4377->acl_h2d_ring.ring_id = BCM4377_XFER_RING_ACL_H2D; |
| | 1742 | bcm4377->acl_h2d_ring.doorbell = BCM4377_DOORBELL_ACL_H2D; |
| | 1743 | bcm4377->acl_h2d_ring.mapped_payload_size = MAX_ACL_PAYLOAD_SIZE; |
| | 1744 | bcm4377->acl_h2d_ring.completion_ring = BCM4377_ACK_RING_HCI_ACL; |
| | 1745 | bcm4377->acl_h2d_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| | 1746 | |
| | 1747 | /* |
| | 1748 | * This ring only contains empty buffers to be used by incoming |
| | 1749 | * ACL packets that do not fit inside the footer of hci_acl_event_ring |
| | 1750 | */ |
| | 1751 | bcm4377->acl_d2h_ring.ring_id = BCM4377_XFER_RING_ACL_D2H; |
| | 1752 | bcm4377->acl_d2h_ring.doorbell = BCM4377_DOORBELL_ACL_D2H; |
| | 1753 | bcm4377->acl_d2h_ring.completion_ring = BCM4377_EVENT_RING_HCI_ACL; |
| | 1754 | bcm4377->acl_d2h_ring.d2h_buffers_only = true; |
| | 1755 | bcm4377->acl_d2h_ring.mapped_payload_size = MAX_ACL_PAYLOAD_SIZE; |
| | 1756 | bcm4377->acl_d2h_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| | 1757 | |
| | 1758 | /* |
| | 1759 | * no need for any cleanup since this is only called from _probe |
| | 1760 | * and only devres-managed allocations are used |
| | 1761 | */ |
| | 1762 | ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->control_h2d_ring); |
| | 1763 | if (ret) |
| | 1764 | return ret; |
| | 1765 | ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->hci_h2d_ring); |
| | 1766 | if (ret) |
| | 1767 | return ret; |
| | 1768 | ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->hci_d2h_ring); |
| | 1769 | if (ret) |
| | 1770 | return ret; |
| | 1771 | ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->sco_h2d_ring); |
| | 1772 | if (ret) |
| | 1773 | return ret; |
| | 1774 | ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->sco_d2h_ring); |
| | 1775 | if (ret) |
| | 1776 | return ret; |
| | 1777 | ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->acl_h2d_ring); |
| | 1778 | if (ret) |
| | 1779 | return ret; |
| | 1780 | ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->acl_d2h_ring); |
| | 1781 | if (ret) |
| | 1782 | return ret; |
| | 1783 | |
| | 1784 | ret = bcm4377_alloc_completion_ring(bcm4377, |
| | 1785 | &bcm4377->control_ack_ring); |
| | 1786 | if (ret) |
| | 1787 | return ret; |
| | 1788 | ret = bcm4377_alloc_completion_ring(bcm4377, |
| | 1789 | &bcm4377->hci_acl_ack_ring); |
| | 1790 | if (ret) |
| | 1791 | return ret; |
| | 1792 | ret = bcm4377_alloc_completion_ring(bcm4377, |
| | 1793 | &bcm4377->hci_acl_event_ring); |
| | 1794 | if (ret) |
| | 1795 | return ret; |
| | 1796 | ret = bcm4377_alloc_completion_ring(bcm4377, &bcm4377->sco_ack_ring); |
| | 1797 | if (ret) |
| | 1798 | return ret; |
| | 1799 | ret = bcm4377_alloc_completion_ring(bcm4377, &bcm4377->sco_event_ring); |
| | 1800 | if (ret) |
| | 1801 | return ret; |
| | 1802 | |
| | 1803 | dev_dbg(&bcm4377->pdev->dev, "all rings allocated and prepared\n"); |
| | 1804 | |
| | 1805 | return 0; |
| | 1806 | } |
| | 1807 | |
| | 1808 | static int bcm4377_boot(struct bcm4377_data *bcm4377) |
| | 1809 | { |
| | 1810 | const struct firmware *fw; |
| | 1811 | void *bfr; |
| | 1812 | dma_addr_t fw_dma; |
| | 1813 | int ret = 0; |
| | 1814 | u32 bootstage, rti_status; |
| | 1815 | |
| | 1816 | bootstage = ioread32(bcm4377->bar2 + BCM4377_BAR2_BOOTSTAGE); |
| | 1817 | rti_status = ioread32(bcm4377->bar2 + BCM4377_BAR2_RTI_STATUS); |
| | 1818 | |
| | 1819 | if (bootstage != 0) { |
| | 1820 | dev_err(&bcm4377->pdev->dev, "bootstage is %d and not 0\n", |
| | 1821 | bootstage); |
| | 1822 | return -EINVAL; |
| | 1823 | } |
| | 1824 | |
| | 1825 | if (rti_status != 0) { |
| | 1826 | dev_err(&bcm4377->pdev->dev, "RTI status is %d and not 0\n", |
| | 1827 | rti_status); |
| | 1828 | return -EINVAL; |
| | 1829 | } |
| | 1830 | |
| | 1831 | fw = bcm4377_request_blob(bcm4377, "bin"); |
| | 1832 | if (!fw) { |
| | 1833 | dev_err(&bcm4377->pdev->dev, "Failed to load firmware\n"); |
| | 1834 | return -ENOENT; |
| | 1835 | } |
| | 1836 | |
| | 1837 | bfr = dma_alloc_coherent(&bcm4377->pdev->dev, fw->size, &fw_dma, |
| | 1838 | GFP_KERNEL); |
| | 1839 | if (!bfr) { |
| | 1840 | ret = -ENOMEM; |
| | 1841 | goto out_release_fw; |
| | 1842 | } |
| | 1843 | |
| | 1844 | memcpy(bfr, fw->data, fw->size); |
| | 1845 | |
| | 1846 | iowrite32(0, bcm4377->bar0 + BCM4377_BAR0_HOST_WINDOW_LO); |
| | 1847 | iowrite32(0, bcm4377->bar0 + BCM4377_BAR0_HOST_WINDOW_HI); |
| | 1848 | iowrite32(BCM4377_DMA_MASK, |
| | 1849 | bcm4377->bar0 + BCM4377_BAR0_HOST_WINDOW_SIZE); |
| | 1850 | |
| | 1851 | iowrite32(lower_32_bits(fw_dma), bcm4377->bar2 + BCM4377_BAR2_FW_LO); |
| | 1852 | iowrite32(upper_32_bits(fw_dma), bcm4377->bar2 + BCM4377_BAR2_FW_HI); |
| | 1853 | iowrite32(fw->size, bcm4377->bar2 + BCM4377_BAR2_FW_SIZE); |
| | 1854 | iowrite32(0, bcm4377->bar0 + BCM4377_BAR0_FW_DOORBELL); |
| | 1855 | |
| | 1856 | dev_dbg(&bcm4377->pdev->dev, "waiting for firmware to boot\n"); |
| | 1857 | |
| | 1858 | ret = wait_for_completion_interruptible_timeout(&bcm4377->event, |
| | 1859 | BCM4377_TIMEOUT); |
| | 1860 | if (ret == 0) { |
| | 1861 | ret = -ETIMEDOUT; |
| | 1862 | goto out_dma_free; |
| | 1863 | } else if (ret < 0) { |
| | 1864 | goto out_dma_free; |
| | 1865 | } |
| | 1866 | |
| | 1867 | if (bcm4377->bootstage != 2) { |
| | 1868 | dev_err(&bcm4377->pdev->dev, "boostage %d != 2\n", |
| | 1869 | bcm4377->bootstage); |
| | 1870 | ret = -ENXIO; |
| | 1871 | goto out_dma_free; |
| | 1872 | } |
| | 1873 | |
| | 1874 | dev_dbg(&bcm4377->pdev->dev, "firmware has booted (stage = %x)\n", |
| | 1875 | bcm4377->bootstage); |
| | 1876 | ret = 0; |
| | 1877 | |
| | 1878 | out_dma_free: |
| | 1879 | dma_free_coherent(&bcm4377->pdev->dev, fw->size, bfr, fw_dma); |
| | 1880 | out_release_fw: |
| | 1881 | release_firmware(fw); |
| | 1882 | return ret; |
| | 1883 | } |
| | 1884 | |
| | 1885 | static int bcm4377_setup_rti(struct bcm4377_data *bcm4377) |
| | 1886 | { |
| | 1887 | int ret; |
| | 1888 | |
| | 1889 | dev_dbg(&bcm4377->pdev->dev, "starting RTI\n"); |
| | 1890 | iowrite32(1, bcm4377->bar0 + BCM4377_BAR0_RTI_CONTROL); |
| | 1891 | |
| | 1892 | ret = wait_for_completion_interruptible_timeout(&bcm4377->event, |
| | 1893 | BCM4377_TIMEOUT); |
| | 1894 | if (ret == 0) { |
| | 1895 | dev_err(&bcm4377->pdev->dev, |
| | 1896 | "timed out while waiting for RTI to transition to state 1"); |
| | 1897 | return -ETIMEDOUT; |
| | 1898 | } else if (ret < 0) { |
| | 1899 | return ret; |
| | 1900 | } |
| | 1901 | |
| | 1902 | if (bcm4377->rti_status != 1) { |
| | 1903 | dev_err(&bcm4377->pdev->dev, "RTI did not ack state 1 (%d)\n", |
| | 1904 | bcm4377->rti_status); |
| | 1905 | return -ENODEV; |
| | 1906 | } |
| | 1907 | dev_dbg(&bcm4377->pdev->dev, "RTI is in state 1\n"); |
| | 1908 | |
| | 1909 | /* allow access to the entire IOVA space again */ |
| | 1910 | iowrite32(0, bcm4377->bar2 + BCM4377_BAR2_RTI_WINDOW_LO); |
| | 1911 | iowrite32(0, bcm4377->bar2 + BCM4377_BAR2_RTI_WINDOW_HI); |
| | 1912 | iowrite32(BCM4377_DMA_MASK, |
| | 1913 | bcm4377->bar2 + BCM4377_BAR2_RTI_WINDOW_SIZE); |
| | 1914 | |
| | 1915 | /* setup "Converged IPC" context */ |
| | 1916 | iowrite32(lower_32_bits(bcm4377->ctx_dma), |
| | 1917 | bcm4377->bar2 + BCM4377_BAR2_CONTEXT_ADDR_LO); |
| | 1918 | iowrite32(upper_32_bits(bcm4377->ctx_dma), |
| | 1919 | bcm4377->bar2 + BCM4377_BAR2_CONTEXT_ADDR_HI); |
| | 1920 | iowrite32(2, bcm4377->bar0 + BCM4377_BAR0_RTI_CONTROL); |
| | 1921 | |
| | 1922 | ret = wait_for_completion_interruptible_timeout(&bcm4377->event, |
| | 1923 | BCM4377_TIMEOUT); |
| | 1924 | if (ret == 0) { |
| | 1925 | dev_err(&bcm4377->pdev->dev, |
| | 1926 | "timed out while waiting for RTI to transition to state 2"); |
| | 1927 | return -ETIMEDOUT; |
| | 1928 | } else if (ret < 0) { |
| | 1929 | return ret; |
| | 1930 | } |
| | 1931 | |
| | 1932 | if (bcm4377->rti_status != 2) { |
| | 1933 | dev_err(&bcm4377->pdev->dev, "RTI did not ack state 2 (%d)\n", |
| | 1934 | bcm4377->rti_status); |
| | 1935 | return -ENODEV; |
| | 1936 | } |
| | 1937 | |
| | 1938 | dev_dbg(&bcm4377->pdev->dev, |
| | 1939 | "RTI is in state 2; control ring is ready\n"); |
| | 1940 | bcm4377->control_ack_ring.enabled = true; |
| | 1941 | |
| | 1942 | return 0; |
| | 1943 | } |
| | 1944 | |
| | 1945 | static int bcm4377_parse_otp_board_params(struct bcm4377_data *bcm4377, |
| | 1946 | char tag, const char *val, size_t len) |
| | 1947 | { |
| | 1948 | if (tag != 'V') |
| | 1949 | return 0; |
| | 1950 | if (len >= sizeof(bcm4377->vendor)) |
| | 1951 | return -EINVAL; |
| | 1952 | |
| | 1953 | strscpy(bcm4377->vendor, val, len + 1); |
| | 1954 | return 0; |
| | 1955 | } |
| | 1956 | |
| | 1957 | static int bcm4377_parse_otp_chip_params(struct bcm4377_data *bcm4377, char tag, |
| | 1958 | const char *val, size_t len) |
| | 1959 | { |
| | 1960 | size_t idx = 0; |
| | 1961 | |
| | 1962 | if (tag != 's') |
| | 1963 | return 0; |
| | 1964 | if (len >= sizeof(bcm4377->stepping)) |
| | 1965 | return -EINVAL; |
| | 1966 | |
| | 1967 | while (len != 0) { |
| | 1968 | bcm4377->stepping[idx] = tolower(val[idx]); |
| | 1969 | if (val[idx] == '\0') |
| | 1970 | return 0; |
| | 1971 | |
| | 1972 | idx++; |
| | 1973 | len--; |
| | 1974 | } |
| | 1975 | |
| | 1976 | bcm4377->stepping[idx] = '\0'; |
| | 1977 | return 0; |
| | 1978 | } |
| | 1979 | |
| | 1980 | static int bcm4377_parse_otp_str(struct bcm4377_data *bcm4377, const u8 *str, |
| | 1981 | enum bcm4377_otp_params_type type) |
| | 1982 | { |
| | 1983 | const char *p; |
| | 1984 | int ret; |
| | 1985 | |
| | 1986 | p = skip_spaces(str); |
| | 1987 | while (*p) { |
| | 1988 | char tag = *p++; |
| | 1989 | const char *end; |
| | 1990 | size_t len; |
| | 1991 | |
| | 1992 | if (*p++ != '=') /* implicit NUL check */ |
| | 1993 | return -EINVAL; |
| | 1994 | |
| | 1995 | /* *p might be NUL here, if so end == p and len == 0 */ |
| | 1996 | end = strchrnul(p, ' '); |
| | 1997 | len = end - p; |
| | 1998 | |
| | 1999 | /* leave 1 byte for NUL in destination string */ |
| | 2000 | if (len > (BCM4377_OTP_MAX_PARAM_LEN - 1)) |
| | 2001 | return -EINVAL; |
| | 2002 | |
| | 2003 | switch (type) { |
| | 2004 | case BCM4377_OTP_BOARD_PARAMS: |
| | 2005 | ret = bcm4377_parse_otp_board_params(bcm4377, tag, p, |
| | 2006 | len); |
| | 2007 | break; |
| | 2008 | case BCM4377_OTP_CHIP_PARAMS: |
| | 2009 | ret = bcm4377_parse_otp_chip_params(bcm4377, tag, p, |
| | 2010 | len); |
| | 2011 | break; |
| | 2012 | default: |
| | 2013 | ret = -EINVAL; |
| | 2014 | break; |
| | 2015 | } |
| | 2016 | |
| | 2017 | if (ret) |
| | 2018 | return ret; |
| | 2019 | |
| | 2020 | /* Skip to next arg, if any */ |
| | 2021 | p = skip_spaces(end); |
| | 2022 | } |
| | 2023 | |
| | 2024 | return 0; |
| | 2025 | } |
| | 2026 | |
| | 2027 | static int bcm4377_parse_otp_sys_vendor(struct bcm4377_data *bcm4377, u8 *otp, |
| | 2028 | size_t size) |
| | 2029 | { |
| | 2030 | int idx = 4; |
| | 2031 | const char *chip_params; |
| | 2032 | const char *board_params; |
| | 2033 | int ret; |
| | 2034 | |
| | 2035 | /* 4-byte header and two empty strings */ |
| | 2036 | if (size < 6) |
| | 2037 | return -EINVAL; |
| | 2038 | |
| | 2039 | if (get_unaligned_le32(otp) != BCM4377_OTP_VENDOR_HDR) |
| | 2040 | return -EINVAL; |
| | 2041 | |
| | 2042 | chip_params = &otp[idx]; |
| | 2043 | |
| | 2044 | /* Skip first string, including terminator */ |
| | 2045 | idx += strnlen(chip_params, size - idx) + 1; |
| | 2046 | if (idx >= size) |
| | 2047 | return -EINVAL; |
| | 2048 | |
| | 2049 | board_params = &otp[idx]; |
| | 2050 | |
| | 2051 | /* Skip to terminator of second string */ |
| | 2052 | idx += strnlen(board_params, size - idx); |
| | 2053 | if (idx >= size) |
| | 2054 | return -EINVAL; |
| | 2055 | |
| | 2056 | /* At this point both strings are guaranteed NUL-terminated */ |
| | 2057 | dev_dbg(&bcm4377->pdev->dev, |
| | 2058 | "OTP: chip_params='%s' board_params='%s'\n", chip_params, |
| | 2059 | board_params); |
| | 2060 | |
| | 2061 | ret = bcm4377_parse_otp_str(bcm4377, chip_params, |
| | 2062 | BCM4377_OTP_CHIP_PARAMS); |
| | 2063 | if (ret) |
| | 2064 | return ret; |
| | 2065 | |
| | 2066 | ret = bcm4377_parse_otp_str(bcm4377, board_params, |
| | 2067 | BCM4377_OTP_BOARD_PARAMS); |
| | 2068 | if (ret) |
| | 2069 | return ret; |
| | 2070 | |
| | 2071 | if (!bcm4377->stepping[0] || !bcm4377->vendor[0]) |
| | 2072 | return -EINVAL; |
| | 2073 | |
| | 2074 | dev_dbg(&bcm4377->pdev->dev, "OTP: stepping=%s, vendor=%s\n", |
| | 2075 | bcm4377->stepping, bcm4377->vendor); |
| | 2076 | return 0; |
| | 2077 | } |
| | 2078 | |
| | 2079 | static int bcm4377_parse_otp(struct bcm4377_data *bcm4377) |
| | 2080 | { |
| | 2081 | u8 *otp; |
| | 2082 | int i; |
| | 2083 | int ret = -ENOENT; |
| | 2084 | |
| | 2085 | otp = kzalloc(BCM4377_OTP_SIZE, GFP_KERNEL); |
| | 2086 | if (!otp) |
| | 2087 | return -ENOMEM; |
| | 2088 | |
| | 2089 | for (i = 0; i < BCM4377_OTP_SIZE; ++i) |
| | 2090 | otp[i] = ioread8(bcm4377->bar0 + bcm4377->hw->otp_offset + i); |
| | 2091 | |
| | 2092 | i = 0; |
| | 2093 | while (i < (BCM4377_OTP_SIZE - 1)) { |
| | 2094 | u8 type = otp[i]; |
| | 2095 | u8 length = otp[i + 1]; |
| | 2096 | |
| | 2097 | if (type == 0) |
| | 2098 | break; |
| | 2099 | |
| | 2100 | if ((i + 2 + length) > BCM4377_OTP_SIZE) |
| | 2101 | break; |
| | 2102 | |
| | 2103 | switch (type) { |
| | 2104 | case BCM4377_OTP_SYS_VENDOR: |
| | 2105 | dev_dbg(&bcm4377->pdev->dev, |
| | 2106 | "OTP @ 0x%x (%d): SYS_VENDOR", i, length); |
| | 2107 | ret = bcm4377_parse_otp_sys_vendor(bcm4377, &otp[i + 2], |
| | 2108 | length); |
| | 2109 | break; |
| | 2110 | case BCM4377_OTP_CIS: |
| | 2111 | dev_dbg(&bcm4377->pdev->dev, "OTP @ 0x%x (%d): CIS", i, |
| | 2112 | length); |
| | 2113 | break; |
| | 2114 | default: |
| | 2115 | dev_dbg(&bcm4377->pdev->dev, "OTP @ 0x%x (%d): unknown", |
| | 2116 | i, length); |
| | 2117 | break; |
| | 2118 | } |
| | 2119 | |
| | 2120 | i += 2 + length; |
| | 2121 | } |
| | 2122 | |
| | 2123 | kfree(otp); |
| | 2124 | return ret; |
| | 2125 | } |
| | 2126 | |
| | 2127 | static int bcm4377_init_cfg(struct bcm4377_data *bcm4377) |
| | 2128 | { |
| | 2129 | int ret; |
| | 2130 | u32 ctrl; |
| | 2131 | |
| | 2132 | ret = pci_write_config_dword(bcm4377->pdev, |
| | 2133 | BCM4377_PCIECFG_BAR0_WINDOW1, |
| | 2134 | bcm4377->hw->bar0_window1); |
| | 2135 | if (ret) |
| | 2136 | return ret; |
| | 2137 | |
| | 2138 | ret = pci_write_config_dword(bcm4377->pdev, |
| | 2139 | BCM4377_PCIECFG_BAR0_WINDOW2, |
| | 2140 | bcm4377->hw->bar0_window2); |
| | 2141 | if (ret) |
| | 2142 | return ret; |
| | 2143 | |
| | 2144 | ret = pci_write_config_dword( |
| | 2145 | bcm4377->pdev, BCM4377_PCIECFG_BAR0_CORE2_WINDOW1, |
| | 2146 | BCM4377_PCIECFG_BAR0_CORE2_WINDOW1_DEFAULT); |
| | 2147 | if (ret) |
| | 2148 | return ret; |
| | 2149 | |
| | 2150 | if (bcm4377->hw->has_bar0_core2_window2) { |
| | 2151 | ret = pci_write_config_dword(bcm4377->pdev, |
| | 2152 | BCM4377_PCIECFG_BAR0_CORE2_WINDOW2, |
| | 2153 | bcm4377->hw->bar0_core2_window2); |
| | 2154 | if (ret) |
| | 2155 | return ret; |
| | 2156 | } |
| | 2157 | |
| | 2158 | ret = pci_write_config_dword(bcm4377->pdev, BCM4377_PCIECFG_BAR2_WINDOW, |
| | 2159 | BCM4377_PCIECFG_BAR2_WINDOW_DEFAULT); |
| | 2160 | if (ret) |
| | 2161 | return ret; |
| | 2162 | |
| | 2163 | ret = pci_read_config_dword(bcm4377->pdev, |
| | 2164 | BCM4377_PCIECFG_SUBSYSTEM_CTRL, &ctrl); |
| | 2165 | if (ret) |
| | 2166 | return ret; |
| | 2167 | |
| | 2168 | if (bcm4377->hw->clear_pciecfg_subsystem_ctrl_bit19) |
| | 2169 | ctrl &= ~BIT(19); |
| | 2170 | ctrl |= BIT(16); |
| | 2171 | |
| | 2172 | return pci_write_config_dword(bcm4377->pdev, |
| | 2173 | BCM4377_PCIECFG_SUBSYSTEM_CTRL, ctrl); |
| | 2174 | } |
| | 2175 | |
| | 2176 | static int bcm4377_probe_dmi(struct bcm4377_data *bcm4377) |
| | 2177 | { |
| | 2178 | const struct dmi_system_id *board_type_dmi_id; |
| | 2179 | |
| | 2180 | board_type_dmi_id = dmi_first_match(bcm4377_dmi_board_table); |
| | 2181 | if (board_type_dmi_id && board_type_dmi_id->driver_data) { |
| | 2182 | bcm4377->board_type = board_type_dmi_id->driver_data; |
| | 2183 | dev_dbg(&bcm4377->pdev->dev, |
| | 2184 | "found board type via DMI match: %s\n", |
| | 2185 | bcm4377->board_type); |
| | 2186 | } |
| | 2187 | |
| | 2188 | return 0; |
| | 2189 | } |
| | 2190 | |
| | 2191 | static int bcm4377_probe_of(struct bcm4377_data *bcm4377) |
| | 2192 | { |
| | 2193 | struct device_node *np = bcm4377->pdev->dev.of_node; |
| | 2194 | int ret; |
| | 2195 | |
| | 2196 | if (!np) |
| | 2197 | return 0; |
| | 2198 | |
| | 2199 | ret = of_property_read_string(np, "brcm,board-type", |
| | 2200 | &bcm4377->board_type); |
| | 2201 | if (ret) { |
| | 2202 | dev_err(&bcm4377->pdev->dev, "no brcm,board-type property\n"); |
| | 2203 | return ret; |
| | 2204 | } |
| | 2205 | |
| | 2206 | bcm4377->taurus_beamforming_cal_blob = |
| | 2207 | of_get_property(np, "brcm,taurus-bf-cal-blob", |
| | 2208 | &bcm4377->taurus_beamforming_cal_size); |
| | 2209 | if (!bcm4377->taurus_beamforming_cal_blob) { |
| | 2210 | dev_err(&bcm4377->pdev->dev, |
| | 2211 | "no brcm,taurus-bf-cal-blob property\n"); |
| | 2212 | return -ENOENT; |
| | 2213 | } |
| | 2214 | bcm4377->taurus_cal_blob = of_get_property(np, "brcm,taurus-cal-blob", |
| | 2215 | &bcm4377->taurus_cal_size); |
| | 2216 | if (!bcm4377->taurus_cal_blob) { |
| | 2217 | dev_err(&bcm4377->pdev->dev, |
| | 2218 | "no brcm,taurus-cal-blob property\n"); |
| | 2219 | return -ENOENT; |
| | 2220 | } |
| | 2221 | |
| | 2222 | return 0; |
| | 2223 | } |
| | 2224 | |
| | 2225 | static void bcm4377_disable_aspm(struct bcm4377_data *bcm4377) |
| | 2226 | { |
| | 2227 | pci_disable_link_state(bcm4377->pdev, |
| | 2228 | PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1); |
| | 2229 | |
| | 2230 | /* |
| | 2231 | * pci_disable_link_state can fail if either CONFIG_PCIEASPM is disabled |
| | 2232 | * or if the BIOS hasn't handed over control to us. We must *always* |
| | 2233 | * disable ASPM for this device due to hardware errata though. |
| | 2234 | */ |
| | 2235 | pcie_capability_clear_word(bcm4377->pdev, PCI_EXP_LNKCTL, |
| | 2236 | PCI_EXP_LNKCTL_ASPMC); |
| | 2237 | } |
| | 2238 | |
| | 2239 | static void bcm4377_pci_free_irq_vectors(void *data) |
| | 2240 | { |
| | 2241 | pci_free_irq_vectors(data); |
| | 2242 | } |
| | 2243 | |
| | 2244 | static void bcm4377_hci_free_dev(void *data) |
| | 2245 | { |
| | 2246 | hci_free_dev(data); |
| | 2247 | } |
| | 2248 | |
| | 2249 | static void bcm4377_hci_unregister_dev(void *data) |
| | 2250 | { |
| | 2251 | hci_unregister_dev(data); |
| | 2252 | } |
| | 2253 | |
| | 2254 | static int bcm4377_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| | 2255 | { |
| | 2256 | struct bcm4377_data *bcm4377; |
| | 2257 | struct hci_dev *hdev; |
| | 2258 | int ret, irq; |
| | 2259 | |
| | 2260 | ret = dma_set_mask_and_coherent(&pdev->dev, BCM4377_DMA_MASK); |
| | 2261 | if (ret) |
| | 2262 | return ret; |
| | 2263 | |
| | 2264 | bcm4377 = devm_kzalloc(&pdev->dev, sizeof(*bcm4377), GFP_KERNEL); |
| | 2265 | if (!bcm4377) |
| | 2266 | return -ENOMEM; |
| | 2267 | |
| | 2268 | bcm4377->pdev = pdev; |
| | 2269 | bcm4377->hw = &bcm4377_hw_variants[id->driver_data]; |
| | 2270 | init_completion(&bcm4377->event); |
| | 2271 | |
| | 2272 | ret = bcm4377_prepare_rings(bcm4377); |
| | 2273 | if (ret) |
| | 2274 | return ret; |
| | 2275 | |
| | 2276 | ret = bcm4377_init_context(bcm4377); |
| | 2277 | if (ret) |
| | 2278 | return ret; |
| | 2279 | |
| | 2280 | ret = bcm4377_probe_dmi(bcm4377); |
| | 2281 | if (ret) |
| | 2282 | return ret; |
| | 2283 | ret = bcm4377_probe_of(bcm4377); |
| | 2284 | if (ret) |
| | 2285 | return ret; |
| | 2286 | if (!bcm4377->board_type) { |
| | 2287 | dev_err(&pdev->dev, "unable to determine board type\n"); |
| | 2288 | return -ENODEV; |
| | 2289 | } |
| | 2290 | |
| | 2291 | if (bcm4377->hw->disable_aspm) |
| | 2292 | bcm4377_disable_aspm(bcm4377); |
| | 2293 | |
| | 2294 | ret = pci_reset_function_locked(pdev); |
| | 2295 | if (ret) |
| | 2296 | dev_warn( |
| | 2297 | &pdev->dev, |
| | 2298 | "function level reset failed with %d; trying to continue anyway\n", |
| | 2299 | ret); |
| | 2300 | |
| | 2301 | /* |
| | 2302 | * If this number is too low and we try to access any BAR too |
| | 2303 | * early the device will crash. Experiments have shown that |
| | 2304 | * approximately 50 msec is the minimum amount we have to wait. |
| | 2305 | * Let's double that to be safe. |
| | 2306 | */ |
| | 2307 | msleep(100); |
| | 2308 | |
| | 2309 | ret = pci_enable_device(pdev); |
| | 2310 | if (ret) |
| | 2311 | return ret; |
| | 2312 | pci_set_master(pdev); |
| | 2313 | |
| | 2314 | ret = bcm4377_init_cfg(bcm4377); |
| | 2315 | if (ret) |
| | 2316 | return ret; |
| | 2317 | |
| | 2318 | bcm4377->bar0 = pcim_iomap(pdev, 0, 0); |
| | 2319 | if (!bcm4377->bar0) |
| | 2320 | return -EBUSY; |
| | 2321 | bcm4377->bar2 = pcim_iomap(pdev, 2, 0); |
| | 2322 | if (!bcm4377->bar2) |
| | 2323 | return -EBUSY; |
| | 2324 | |
| | 2325 | ret = bcm4377_parse_otp(bcm4377); |
| | 2326 | if (ret) { |
| | 2327 | dev_err(&pdev->dev, "Reading OTP failed with %d\n", ret); |
| | 2328 | return ret; |
| | 2329 | } |
| | 2330 | |
| | 2331 | /* |
| | 2332 | * Legacy interrupts result in an IRQ storm because we don't know where |
| | 2333 | * the interrupt mask and status registers for these chips are. |
| | 2334 | * MSIs are acked automatically instead. |
| | 2335 | */ |
| | 2336 | ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI); |
| | 2337 | if (ret < 0) |
| | 2338 | return -ENODEV; |
| | 2339 | ret = devm_add_action_or_reset(&pdev->dev, bcm4377_pci_free_irq_vectors, |
| | 2340 | pdev); |
| | 2341 | if (ret) |
| | 2342 | return ret; |
| | 2343 | |
| | 2344 | irq = pci_irq_vector(pdev, 0); |
| | 2345 | if (irq <= 0) |
| | 2346 | return -ENODEV; |
| | 2347 | |
| | 2348 | ret = devm_request_irq(&pdev->dev, irq, bcm4377_irq, 0, "bcm4377", |
| | 2349 | bcm4377); |
| | 2350 | if (ret) |
| | 2351 | return ret; |
| | 2352 | |
| | 2353 | hdev = hci_alloc_dev(); |
| | 2354 | if (!hdev) |
| | 2355 | return -ENOMEM; |
| | 2356 | ret = devm_add_action_or_reset(&pdev->dev, bcm4377_hci_free_dev, hdev); |
| | 2357 | if (ret) |
| | 2358 | return ret; |
| | 2359 | |
| | 2360 | bcm4377->hdev = hdev; |
| | 2361 | |
| | 2362 | hdev->bus = HCI_PCI; |
| | 2363 | hdev->dev_type = HCI_PRIMARY; |
| | 2364 | hdev->open = bcm4377_hci_open; |
| | 2365 | hdev->close = bcm4377_hci_close; |
| | 2366 | hdev->send = bcm4377_hci_send_frame; |
| | 2367 | hdev->set_bdaddr = bcm4377_hci_set_bdaddr; |
| | 2368 | hdev->setup = bcm4377_hci_setup; |
| | 2369 | |
| | 2370 | set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks); |
| | 2371 | if (bcm4377->hw->broken_mws_transport_config) |
| | 2372 | set_bit(HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG, &hdev->quirks); |
| | 2373 | if (bcm4377->hw->broken_ext_scan) |
| | 2374 | set_bit(HCI_QUIRK_BROKEN_EXT_SCAN, &hdev->quirks); |
| | 2375 | |
| | 2376 | pci_set_drvdata(pdev, bcm4377); |
| | 2377 | hci_set_drvdata(hdev, bcm4377); |
| | 2378 | SET_HCIDEV_DEV(hdev, &pdev->dev); |
| | 2379 | |
| | 2380 | ret = bcm4377_boot(bcm4377); |
| | 2381 | if (ret) |
| | 2382 | return ret; |
| | 2383 | |
| | 2384 | ret = bcm4377_setup_rti(bcm4377); |
| | 2385 | if (ret) |
| | 2386 | return ret; |
| | 2387 | |
| | 2388 | ret = hci_register_dev(hdev); |
| | 2389 | if (ret) |
| | 2390 | return ret; |
| | 2391 | return devm_add_action_or_reset(&pdev->dev, bcm4377_hci_unregister_dev, |
| | 2392 | hdev); |
| | 2393 | } |
| | 2394 | |
| | 2395 | static int bcm4377_suspend(struct pci_dev *pdev, pm_message_t state) |
| | 2396 | { |
| | 2397 | struct bcm4377_data *bcm4377 = pci_get_drvdata(pdev); |
| | 2398 | int ret; |
| | 2399 | |
| | 2400 | ret = hci_suspend_dev(bcm4377->hdev); |
| | 2401 | if (ret) |
| | 2402 | return ret; |
| | 2403 | |
| | 2404 | iowrite32(BCM4377_BAR0_SLEEP_CONTROL_QUIESCE, |
| | 2405 | bcm4377->bar0 + BCM4377_BAR0_SLEEP_CONTROL); |
| | 2406 | |
| | 2407 | return 0; |
| | 2408 | } |
| | 2409 | |
| | 2410 | static int bcm4377_resume(struct pci_dev *pdev) |
| | 2411 | { |
| | 2412 | struct bcm4377_data *bcm4377 = pci_get_drvdata(pdev); |
| | 2413 | |
| | 2414 | iowrite32(BCM4377_BAR0_SLEEP_CONTROL_UNQUIESCE, |
| | 2415 | bcm4377->bar0 + BCM4377_BAR0_SLEEP_CONTROL); |
| | 2416 | |
| | 2417 | return hci_resume_dev(bcm4377->hdev); |
| | 2418 | } |
| | 2419 | |
| | 2420 | static const struct dmi_system_id bcm4377_dmi_board_table[] = { |
| | 2421 | { |
| | 2422 | .matches = { |
| | 2423 | DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."), |
| | 2424 | DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir9,1"), |
| | 2425 | }, |
| | 2426 | .driver_data = "apple,formosa", |
| | 2427 | }, |
| | 2428 | { |
| | 2429 | .matches = { |
| | 2430 | DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."), |
| | 2431 | DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro15,4"), |
| | 2432 | }, |
| | 2433 | .driver_data = "apple,formosa", |
| | 2434 | }, |
| | 2435 | { |
| | 2436 | .matches = { |
| | 2437 | DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."), |
| | 2438 | DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro16,3"), |
| | 2439 | }, |
| | 2440 | .driver_data = "apple,formosa", |
| | 2441 | }, |
| | 2442 | {} |
| | 2443 | }; |
| | 2444 | |
| | 2445 | static const struct bcm4377_hw bcm4377_hw_variants[] = { |
| | 2446 | [BCM4377] = { |
| | 2447 | .id = 0x4377, |
| | 2448 | .otp_offset = 0x4120, |
| | 2449 | .bar0_window1 = 0x1800b000, |
| | 2450 | .bar0_window2 = 0x1810c000, |
| | 2451 | .disable_aspm = true, |
| | 2452 | .broken_ext_scan = true, |
| | 2453 | .send_ptb = bcm4377_send_ptb, |
| | 2454 | }, |
| | 2455 | |
| | 2456 | [BCM4378] = { |
| | 2457 | .id = 0x4378, |
| | 2458 | .otp_offset = 0x4120, |
| | 2459 | .bar0_window1 = 0x18002000, |
| | 2460 | .bar0_window2 = 0x1810a000, |
| | 2461 | .bar0_core2_window2 = 0x18107000, |
| | 2462 | .has_bar0_core2_window2 = true, |
| | 2463 | .broken_mws_transport_config = true, |
| | 2464 | .send_calibration = bcm4378_send_calibration, |
| | 2465 | .send_ptb = bcm4378_send_ptb, |
| | 2466 | }, |
| | 2467 | |
| | 2468 | [BCM4387] = { |
| | 2469 | .id = 0x4387, |
| | 2470 | .otp_offset = 0x413c, |
| | 2471 | .bar0_window1 = 0x18002000, |
| | 2472 | .bar0_window2 = 0x18109000, |
| | 2473 | .bar0_core2_window2 = 0x18106000, |
| | 2474 | .has_bar0_core2_window2 = true, |
| | 2475 | .clear_pciecfg_subsystem_ctrl_bit19 = true, |
| | 2476 | .broken_mws_transport_config = true, |
| | 2477 | .send_calibration = bcm4387_send_calibration, |
| | 2478 | .send_ptb = bcm4378_send_ptb, |
| | 2479 | }, |
| | 2480 | }; |
| | 2481 | |
| | 2482 | #define BCM4377_DEVID_ENTRY(id) \ |
| | 2483 | { \ |
| | 2484 | PCI_VENDOR_ID_BROADCOM, BCM##id##_DEVICE_ID, PCI_ANY_ID, \ |
| | 2485 | PCI_ANY_ID, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, \ |
| | 2486 | BCM##id \ |
| | 2487 | } |
| | 2488 | |
| | 2489 | static const struct pci_device_id bcm4377_devid_table[] = { |
| | 2490 | BCM4377_DEVID_ENTRY(4377), |
| | 2491 | BCM4377_DEVID_ENTRY(4378), |
| | 2492 | BCM4377_DEVID_ENTRY(4387), |
| | 2493 | {}, |
| | 2494 | }; |
| | 2495 | MODULE_DEVICE_TABLE(pci, bcm4377_devid_table); |
| | 2496 | |
| | 2497 | static struct pci_driver bcm4377_pci_driver = { |
| | 2498 | .name = "hci_bcm4377", |
| | 2499 | .id_table = bcm4377_devid_table, |
| | 2500 | .probe = bcm4377_probe, |
| | 2501 | .suspend = bcm4377_suspend, |
| | 2502 | .resume = bcm4377_resume, |
| | 2503 | }; |
| | 2504 | module_pci_driver(bcm4377_pci_driver); |
| | 2505 | |
| | 2506 | MODULE_AUTHOR("Sven Peter <sven@svenpeter.dev>"); |
| | 2507 | MODULE_DESCRIPTION("Bluetooth support for Broadcom 4377/4378/4387 devices"); |
| | 2508 | MODULE_LICENSE("Dual MIT/GPL"); |
| | 2509 | MODULE_FIRMWARE("brcm/brcmbt4377*.bin"); |
| | 2510 | MODULE_FIRMWARE("brcm/brcmbt4377*.ptb"); |
| | 2511 | MODULE_FIRMWARE("brcm/brcmbt4378*.bin"); |
| | 2512 | MODULE_FIRMWARE("brcm/brcmbt4378*.ptb"); |
| | 2513 | MODULE_FIRMWARE("brcm/brcmbt4387*.bin"); |
| | 2514 | MODULE_FIRMWARE("brcm/brcmbt4387*.ptb"); |