Add support for 802.1ad VLAN devices. This mainly consists of checking for ETH_P_8021AD in addition to ETH_P_8021Q in a couple of places and check offloading capabilities based on the used protocol. Configuration is done using "ip link": # ip link add link eth0 eth0.1000 \ type vlan proto 802.1ad id 1000 # ip link add link eth0.1000 eth0.1000.1000 \ type vlan proto 802.1q id 1000 52:54:00:12:34:56 > 92:b1:54:28:e4:8c, ethertype 802.1Q (0x8100), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 20.1.0.2 > 20.1.0.1: ICMP echo request, id 3003, seq 8, length 64 92:b1:54:28:e4:8c > 52:54:00:12:34:56, ethertype 802.1Q-QinQ (0x88a8), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 47944, offset 0, flags [none], proto ICMP (1), length 84) 20.1.0.1 > 20.1.0.2: ICMP echo reply, id 3003, seq 8, length 64
Showing the changes to include/uapi/linux (1 of 8 files). Show all
Unified · Split
| @@ -250,6 +250,7 @@ enum { · 249 unmodified lines | |||
| 250 | IFLA_VLAN_FLAGS, | 250 | IFLA_VLAN_FLAGS, |
| 251 | IFLA_VLAN_EGRESS_QOS, | 251 | IFLA_VLAN_EGRESS_QOS, |
| 252 | IFLA_VLAN_INGRESS_QOS, | 252 | IFLA_VLAN_INGRESS_QOS, |
| 253 | IFLA_VLAN_PROTOCOL, | ||
| 253 | __IFLA_VLAN_MAX, | 254 | __IFLA_VLAN_MAX, |
| 254 | }; | 255 | }; |
| 255 | 256 | ||