Format comments according to what checkpatch wants. No other changes.
Showing the changes to include/uapi/linux (1 of 1 file). Show all
Unified · Split
| @@ -1303,33 +1303,43 @@ struct v4l2_bt_timings { · 1302 unmodified lines | |||
| 1303 | 1303 | ||
| 1304 | /* Flags */ | 1304 | /* Flags */ |
| 1305 | 1305 | ||
| 1306 | /* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary | 1306 | /* |
| 1307 | GTF' curve (GTF). In both cases the horizontal and/or vertical blanking | 1307 | * CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary |
| 1308 | intervals are reduced, allowing a higher resolution over the same | 1308 | * GTF' curve (GTF). In both cases the horizontal and/or vertical blanking |
| 1309 | bandwidth. This is a read-only flag. */ | 1309 | * intervals are reduced, allowing a higher resolution over the same |
| 1310 | * bandwidth. This is a read-only flag. | ||
| 1311 | */ | ||
| 1310 | #define V4L2_DV_FL_REDUCED_BLANKING (1 << 0) | 1312 | #define V4L2_DV_FL_REDUCED_BLANKING (1 << 0) |
| 1311 | /* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple | 1313 | /* |
| 1312 | of six. These formats can be optionally played at 1 / 1.001 speed. | 1314 | * CEA-861 specific: set for CEA-861 formats with a framerate of a multiple |
| 1313 | This is a read-only flag. */ | 1315 | * of six. These formats can be optionally played at 1 / 1.001 speed. |
| 1316 | * This is a read-only flag. | ||
| 1317 | */ | ||
| 1314 | #define V4L2_DV_FL_CAN_REDUCE_FPS (1 << 1) | 1318 | #define V4L2_DV_FL_CAN_REDUCE_FPS (1 << 1) |
| 1315 | /* CEA-861 specific: only valid for video transmitters, the flag is cleared | 1319 | /* |
| 1316 | by receivers. | 1320 | * CEA-861 specific: only valid for video transmitters, the flag is cleared |
| 1317 | If the framerate of the format is a multiple of six, then the pixelclock | 1321 | * by receivers. |
| 1318 | used to set up the transmitter is divided by 1.001 to make it compatible | 1322 | * If the framerate of the format is a multiple of six, then the pixelclock |
| 1319 | with 60 Hz based standards such as NTSC and PAL-M that use a framerate of | 1323 | * used to set up the transmitter is divided by 1.001 to make it compatible |
| 1320 | 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate | 1324 | * with 60 Hz based standards such as NTSC and PAL-M that use a framerate of |
| 1321 | such frequencies, then the flag will also be cleared. */ | 1325 | * 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate |
| 1326 | * such frequencies, then the flag will also be cleared. | ||
| 1327 | */ | ||
| 1322 | #define V4L2_DV_FL_REDUCED_FPS (1 << 2) | 1328 | #define V4L2_DV_FL_REDUCED_FPS (1 << 2) |
| 1323 | /* Specific to interlaced formats: if set, then field 1 is really one half-line | 1329 | /* |
| 1324 | longer and field 2 is really one half-line shorter, so each field has | 1330 | * Specific to interlaced formats: if set, then field 1 is really one half-line |
| 1325 | exactly the same number of half-lines. Whether half-lines can be detected | 1331 | * longer and field 2 is really one half-line shorter, so each field has |
| 1326 | or used depends on the hardware. */ | 1332 | * exactly the same number of half-lines. Whether half-lines can be detected |
| 1333 | * or used depends on the hardware. | ||
| 1334 | */ | ||
| 1327 | #define V4L2_DV_FL_HALF_LINE (1 << 3) | 1335 | #define V4L2_DV_FL_HALF_LINE (1 << 3) |
| 1328 | /* If set, then this is a Consumer Electronics (CE) video format. Such formats | 1336 | /* |
| 1337 | * If set, then this is a Consumer Electronics (CE) video format. Such formats | ||
| 1329 | * differ from other formats (commonly called IT formats) in that if RGB | 1338 | * differ from other formats (commonly called IT formats) in that if RGB |
| 1330 | * encoding is used then by default the RGB values use limited range (i.e. | 1339 | * encoding is used then by default the RGB values use limited range (i.e. |
| 1331 | * use the range 16-235) as opposed to 0-255. All formats defined in CEA-861 | 1340 | * use the range 16-235) as opposed to 0-255. All formats defined in CEA-861 |
| 1332 | * except for the 640x480 format are CE formats. */ | 1341 | * except for the 640x480 format are CE formats. |
| 1342 | */ | ||
| 1333 | #define V4L2_DV_FL_IS_CE_VIDEO (1 << 4) | 1343 | #define V4L2_DV_FL_IS_CE_VIDEO (1 << 4) |
| 1334 | /* Some formats like SMPTE-125M have an interlaced signal with a odd | 1344 | /* Some formats like SMPTE-125M have an interlaced signal with a odd |
| 1335 | * total height. For these formats, if this flag is set, the first | 1345 | * total height. For these formats, if this flag is set, the first |