History

[media] videodev2.h: checkpatch cleanup

Format comments according to what checkpatch wants. No other changes.

Hans Verkuil committed 10 years ago

Commit 8fbe91e1 parent a503ff81 file · +30 −20Browse files

Showing the changes to include/uapi/linux (1 of 1 file). Show all

Unified · Split

include/uapi/linux/videodev2.h+30−20
@@ -1303,33 +1303,43 @@ struct v4l2_bt_timings { · 1302 unmodified lines
13031303
13041304 /* Flags */
13051305
1306−/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary
1307− GTF' curve (GTF). In both cases the horizontal and/or vertical blanking
1308− intervals are reduced, allowing a higher resolution over the same
1309− bandwidth. This is a read-only flag. */
1306+/*
1307+ * CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary
1308+ * GTF' curve (GTF). In both cases the horizontal and/or vertical blanking
1309+ * intervals are reduced, allowing a higher resolution over the same
1310+ * bandwidth. This is a read-only flag.
1311+ */
13101312 #define V4L2_DV_FL_REDUCED_BLANKING (1 << 0)
1311−/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple
1312− of six. These formats can be optionally played at 1 / 1.001 speed.
1313− This is a read-only flag. */
1313+/*
1314+ * CEA-861 specific: set for CEA-861 formats with a framerate of a multiple
1315+ * of six. These formats can be optionally played at 1 / 1.001 speed.
1316+ * This is a read-only flag.
1317+ */
13141318 #define V4L2_DV_FL_CAN_REDUCE_FPS (1 << 1)
1315−/* CEA-861 specific: only valid for video transmitters, the flag is cleared
1316− by receivers.
1317− If the framerate of the format is a multiple of six, then the pixelclock
1318− used to set up the transmitter is divided by 1.001 to make it compatible
1319− with 60 Hz based standards such as NTSC and PAL-M that use a framerate of
1320− 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate
1321− such frequencies, then the flag will also be cleared. */
1319+/*
1320+ * CEA-861 specific: only valid for video transmitters, the flag is cleared
1321+ * by receivers.
1322+ * If the framerate of the format is a multiple of six, then the pixelclock
1323+ * used to set up the transmitter is divided by 1.001 to make it compatible
1324+ * with 60 Hz based standards such as NTSC and PAL-M that use a framerate of
1325+ * 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate
1326+ * such frequencies, then the flag will also be cleared.
1327+ */
13221328 #define V4L2_DV_FL_REDUCED_FPS (1 << 2)
1323−/* Specific to interlaced formats: if set, then field 1 is really one half-line
1324− longer and field 2 is really one half-line shorter, so each field has
1325− exactly the same number of half-lines. Whether half-lines can be detected
1326− or used depends on the hardware. */
1329+/*
1330+ * Specific to interlaced formats: if set, then field 1 is really one half-line
1331+ * longer and field 2 is really one half-line shorter, so each field has
1332+ * exactly the same number of half-lines. Whether half-lines can be detected
1333+ * or used depends on the hardware.
1334+ */
13271335 #define V4L2_DV_FL_HALF_LINE (1 << 3)
1328−/* If set, then this is a Consumer Electronics (CE) video format. Such formats
1336+/*
1337+ * If set, then this is a Consumer Electronics (CE) video format. Such formats
13291338 * differ from other formats (commonly called IT formats) in that if RGB
13301339 * encoding is used then by default the RGB values use limited range (i.e.
13311340 * use the range 16-235) as opposed to 0-255. All formats defined in CEA-861
1332− * except for the 640x480 format are CE formats. */
1341+ * except for the 640x480 format are CE formats.
1342+ */
13331343 #define V4L2_DV_FL_IS_CE_VIDEO (1 << 4)
13341344 /* Some formats like SMPTE-125M have an interlaced signal with a odd
13351345 * total height. For these formats, if this flag is set, the first