Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for some reported problems: - fsl_uart driver bugfixes - sh-sci serial driver bugfixes - renesas serial driver DT binding bugfixes - 8250 DMA bugfix All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: sh-sci: Fix Rx on RZ/G2L SCI tty: serial: fsl_lpuart: fix crash in lpuart_uport_is_active tty: serial: fsl_lpuart: avoid checking for transfer complete when UARTCTRL_SBK is asserted in lpuart32_tx_empty serial: 8250: Prevent starting up DMA Rx on THRI interrupt dt-bindings: serial: renesas,scif: Fix 4th IRQ for 4-IRQ SCIFs tty: serial: sh-sci: Fix transmit end interrupt handler
Unified · Split
| @@ -92,7 +92,7 @@ properties: · 91 unmodified lines | |||
| 92 | - description: Error interrupt | 92 | - description: Error interrupt |
| 93 | - description: Receive buffer full interrupt | 93 | - description: Receive buffer full interrupt |
| 94 | - description: Transmit buffer empty interrupt | 94 | - description: Transmit buffer empty interrupt |
| 95 | - description: Transmit End interrupt | 95 | - description: Break interrupt |
| 96 | - items: | 96 | - items: |
| 97 | - description: Error interrupt | 97 | - description: Error interrupt |
| 98 | - description: Receive buffer full interrupt | 98 | - description: Receive buffer full interrupt |
| @@ -107,7 +107,7 @@ properties: · 8 unmodified lines | |||
| 107 | - const: eri | 107 | - const: eri |
| 108 | - const: rxi | 108 | - const: rxi |
| 109 | - const: txi | 109 | - const: txi |
| 110 | - const: tei | 110 | - const: bri |
| 111 | - items: | 111 | - items: |
| 112 | - const: eri | 112 | - const: eri |
| 113 | - const: rxi | 113 | - const: rxi |
| @@ -1903,6 +1903,17 @@ EXPORT_SYMBOL_GPL(serial8250_modem_status); · 1902 unmodified lines | |||
| 1903 | static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir) | 1903 | static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir) |
| 1904 | { | 1904 | { |
| 1905 | switch (iir & 0x3f) { | 1905 | switch (iir & 0x3f) { |
| 1906 | case UART_IIR_THRI: | ||
| 1907 | /* | ||
| 1908 | * Postpone DMA or not decision to IIR_RDI or IIR_RX_TIMEOUT | ||
| 1909 | * because it's impossible to do an informed decision about | ||
| 1910 | * that with IIR_THRI. | ||
| 1911 | * | ||
| 1912 | * This also fixes one known DMA Rx corruption issue where | ||
| 1913 | * DR is asserted but DMA Rx only gets a corrupted zero byte | ||
| 1914 | * (too early DR?). | ||
| 1915 | */ | ||
| 1916 | return false; | ||
| 1906 | case UART_IIR_RDI: | 1917 | case UART_IIR_RDI: |
| 1907 | if (!up->dma->rx_running) | 1918 | if (!up->dma->rx_running) |
| 1908 | break; | 1919 | break; |
| @@ -858,11 +858,17 @@ static unsigned int lpuart32_tx_empty(struct uart_port *port) · 857 unmodified lines | |||
| 858 | struct lpuart_port, port); | 858 | struct lpuart_port, port); |
| 859 | unsigned long stat = lpuart32_read(port, UARTSTAT); | 859 | unsigned long stat = lpuart32_read(port, UARTSTAT); |
| 860 | unsigned long sfifo = lpuart32_read(port, UARTFIFO); | 860 | unsigned long sfifo = lpuart32_read(port, UARTFIFO); |
| 861 | unsigned long ctrl = lpuart32_read(port, UARTCTRL); | ||
| 861 | 862 | ||
| 862 | if (sport->dma_tx_in_progress) | 863 | if (sport->dma_tx_in_progress) |
| 863 | return 0; | 864 | return 0; |
| 864 | 865 | ||
| 865 | if (stat & UARTSTAT_TC && sfifo & UARTFIFO_TXEMPT) | 866 | /* |
| 867 | * LPUART Transmission Complete Flag may never be set while queuing a break | ||
| 868 | * character, so avoid checking for transmission complete when UARTCTRL_SBK | ||
| 869 | * is asserted. | ||
| 870 | */ | ||
| 871 | if ((stat & UARTSTAT_TC && sfifo & UARTFIFO_TXEMPT) || ctrl & UARTCTRL_SBK) | ||
| 866 | return TIOCSER_TEMT; | 872 | return TIOCSER_TEMT; |
| 867 | 873 | ||
| 868 | return 0; | 874 | return 0; |
| @@ -2942,7 +2948,7 @@ static bool lpuart_uport_is_active(struct lpuart_port *sport) · 2073 unmodified lines | |||
| 2942 | tty = tty_port_tty_get(port); | 2948 | tty = tty_port_tty_get(port); |
| 2943 | if (tty) { | 2949 | if (tty) { |
| 2944 | tty_dev = tty->dev; | 2950 | tty_dev = tty->dev; |
| 2945 | may_wake = device_may_wakeup(tty_dev); | 2951 | may_wake = tty_dev && device_may_wakeup(tty_dev); |
| 2946 | tty_kref_put(tty); | 2952 | tty_kref_put(tty); |
| 2947 | } | 2953 | } |
| 2948 | 2954 | ||
| @@ -31,6 +31,7 @@ · 30 unmodified lines | |||
| 31 | #include <linux/ioport.h> | 31 | #include <linux/ioport.h> |
| 32 | #include <linux/ktime.h> | 32 | #include <linux/ktime.h> |
| 33 | #include <linux/major.h> | 33 | #include <linux/major.h> |
| 34 | #include <linux/minmax.h> | ||
| 34 | #include <linux/module.h> | 35 | #include <linux/module.h> |
| 35 | #include <linux/mm.h> | 36 | #include <linux/mm.h> |
| 36 | #include <linux/of.h> | 37 | #include <linux/of.h> |
| @@ -2864,6 +2865,13 @@ static int sci_init_single(struct platform_device *dev, · 2827 unmodified lines | |||
| 2864 | sci_port->irqs[i] = platform_get_irq(dev, i); | 2865 | sci_port->irqs[i] = platform_get_irq(dev, i); |
| 2865 | } | 2866 | } |
| 2866 | 2867 | ||
| 2868 | /* | ||
| 2869 | * The fourth interrupt on SCI port is transmit end interrupt, so | ||
| 2870 | * shuffle the interrupts. | ||
| 2871 | */ | ||
| 2872 | if (p->type == PORT_SCI) | ||
| 2873 | swap(sci_port->irqs[SCIx_BRI_IRQ], sci_port->irqs[SCIx_TEI_IRQ]); | ||
| 2874 | |||
| 2867 | /* The SCI generates several interrupts. They can be muxed together or | 2875 | /* The SCI generates several interrupts. They can be muxed together or |
| 2868 | * connected to different interrupt lines. In the muxed case only one | 2876 | * connected to different interrupt lines. In the muxed case only one |
| 2869 | * interrupt resource is specified as there is only one interrupt ID. | 2877 | * interrupt resource is specified as there is only one interrupt ID. |
| @@ -2929,7 +2937,7 @@ static int sci_init_single(struct platform_device *dev, · 59 unmodified lines | |||
| 2929 | port->flags = UPF_FIXED_PORT | UPF_BOOT_AUTOCONF | p->flags; | 2937 | port->flags = UPF_FIXED_PORT | UPF_BOOT_AUTOCONF | p->flags; |
| 2930 | port->fifosize = sci_port->params->fifosize; | 2938 | port->fifosize = sci_port->params->fifosize; |
| 2931 | 2939 | ||
| 2932 | if (port->type == PORT_SCI) { | 2940 | if (port->type == PORT_SCI && !dev->dev.of_node) { |
| 2933 | if (sci_port->reg_size >= 0x20) | 2941 | if (sci_port->reg_size >= 0x20) |
| 2934 | port->regshift = 2; | 2942 | port->regshift = 2; |
| 2935 | else | 2943 | else |