History

Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT updates from Arnd Bergmann: "This is a rather large update for the ARM devicetree files, after a few quieter releases, with 775 total commits and 47 branches pulled into this one. There are 5 new SoC types plus some minor variations, and a total of 60 new machines, so I'm limiting the summary to the main noteworthy items: - Apple M1 gain support for PCI and pinctrl, getting a bit closer to a usable system out of the box. - Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as SM7225, 11 new smartphones, and three additional Chromebooks, and improvements all over the place. - Samsung gains support for ExynosAutov9, an automotive version of their smartphone SoC, but otherwise no major changes. - Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number of improvements for the recently added SAMA7 family. The LAN966 SoC that was added in the platform code does not have dts files yet. Two board files are added for the older at91sam9g20 SoC - Aspeed supports two additional server boards using their AST2600 as BMC, and improves support for qemu models - Rockchip RK3566/RK3688 gets added, along with six new development boards using RK3328/RK3399/RK3566, and one Chromebook tablet. - Two NAS boxes are added using the ARMv4 based Gemini platform - One new board is added to the Intel Arria SoC FPGA family - Marvell adds one network switch based on Armada 381 and the new MOCHAbin 7040 development board - NXP adds support for the S32G2 automotive SoC, two imx6 based ebook readers, and three additional development boards, which is notably less than their usual additions, but they also gain improvements to their many existing boards - STmicroelectronics adds their stm32mp13 SoC family along with a reference board - Renesas adds new versions of their R-Car Gen3 SoCs and many updates for their older generations - Broadcom adds support for a number of Cisco Meraki wireless controllers, along with two new boards and other updates for BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards - Mediatek improves support for the MT81xx SoCs used in Chromebooks as well as the MT76xx networking SoCs - NVIDIA adds a number of cleanups and additional support for more hardware on the already supported machines - TI K3 adds support for three new boards along with cleanups - Toshiba adds one board for the Visconti family - Xilinx adds five new ZynqMP based machines - Amlogic support is added for the Radxa Zero and two Jethub home automation controllers, along with changes to other machines - Rob Herring continues his work on fixing dtc warnings all over the tree. - Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon, Ux500, Unisoc" * tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits) arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address arm64: dts: apple: t8103: Add root port interrupt routing arm64: dts: apple: t8103: Add PCIe DARTs arm64: apple: Add PCIe node arm64: apple: Add pinctrl nodes ARM: dts: arm: Update ICST clock nodes 'reg' and node names ARM: dts: arm: Update register-bit-led nodes 'reg' and node names arm64: dts: exynos: add chipid node for exynosautov9 SoC ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors" arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property arm64: dts: qcom: sm8350: Add CPU topology and idle-states arm64: dts: qcom: Drop unneeded extra device-specific includes arm64: dts: qcom: msm8916: Drop standalone smem node arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: msm8916-asus-z00l: Add SDCard arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node ...

Linus Torvalds committed 5 years ago

Commit ae45d842 parents 2219b0c c17c7cc706 files · +49099 −9322Browse files

Unified · Split

706 files
  1. .mailmap +1 −0
  2. Documentation/devicetree/bindings/arm/amlogic.yaml +3 −0
  3. Documentation/devicetree/bindings/arm/atmel-at91.yaml +12 −0
  4. Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml +1 −0
  5. Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml +55 −10
  6. Documentation/devicetree/bindings/arm/cpus.yaml +2 −0
  7. Documentation/devicetree/bindings/arm/fsl.yaml +61 −38
  8. Documentation/devicetree/bindings/arm/mediatek.yaml +1 −0
  9. Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml +4 −0
  10. Documentation/devicetree/bindings/arm/qcom.yaml +23 −0
  11. Documentation/devicetree/bindings/arm/renesas.yaml +61 −0
  12. Documentation/devicetree/bindings/arm/rockchip.yaml +47 −1
  13. Documentation/devicetree/bindings/arm/rockchip/pmu.yaml +4 −0
  14. Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +6 −0
  15. Documentation/devicetree/bindings/arm/sprd/sprd.yaml +5 −0
  16. Documentation/devicetree/bindings/arm/stm32/stm32.yaml +4 −0
  17. Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml +1 −0
  18. Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml +38 −0
  19. Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml +33 −0
  20. Documentation/devicetree/bindings/arm/ti/k3.yaml +13 −2
  21. Documentation/devicetree/bindings/arm/toshiba.yaml +1 −0
  22. Documentation/devicetree/bindings/arm/xilinx.yaml +17 −0
  23. Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml +3 −0
  24. Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml +3 −0
  25. Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml +3 −0
  26. Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml +3 −0
  27. Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +6 −0
  28. Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml +106 −0
  29. Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt +0 −157
  30. Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml +245 −0
  31. Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml +172 −0
  32. Documentation/devicetree/bindings/mtd/gpmc-nand.txt +0 −147
  33. Documentation/devicetree/bindings/mtd/gpmc-nor.txt +0 −98
  34. Documentation/devicetree/bindings/mtd/gpmc-onenand.txt +0 −48
  35. Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml +121 −0
  36. Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml +81 −0
  37. Documentation/devicetree/bindings/net/gpmc-eth.txt +0 −97
  38. Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt +1 −1
  39. Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt +0 −22
  40. Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml +48 −0
  41. Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml +94 −0
  42. Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml +76 −0
  43. Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml +3 −0
  44. Documentation/devicetree/bindings/vendor-prefixes.yaml +10 −0
  45. MAINTAINERS +1 −0
  46. arch/arm/boot/dts/Makefile +24 −2
  47. arch/arm/boot/dts/am335x-pocketbeagle.dts +1 −0
  48. arch/arm/boot/dts/arm-realview-eb.dtsi +29 −13
  49. arch/arm/boot/dts/arm-realview-pb1176.dts +29 −13
  50. arch/arm/boot/dts/arm-realview-pb11mp.dts +33 −15
  51. arch/arm/boot/dts/arm-realview-pbx.dtsi +29 −13
  52. arch/arm/boot/dts/armada-381-netgear-gs110emx.dts +295 −0
  53. arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts +5 −0
  54. arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts +20 −1
  55. arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +223 −660
  56. arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +956 −331
  57. arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts +8 −1
  58. arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts +328 −0
  59. arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts +488 −0
  60. arch/arm/boot/dts/aspeed-g4.dtsi +6 −0
  61. arch/arm/boot/dts/aspeed-g5.dtsi +6 −0
  62. arch/arm/boot/dts/aspeed-g6.dtsi +26 −0
  63. arch/arm/boot/dts/at91-lmu5000.dts +147 −0
  64. arch/arm/boot/dts/at91-q5xr5.dts +199 −0
  65. arch/arm/boot/dts/at91-sama5d27_som1.dtsi +11 −1
  66. arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +21 −2
  67. arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +70 −0
  68. arch/arm/boot/dts/at91-sama5d2_icp.dts +20 −2
  69. arch/arm/boot/dts/at91-sama7g5ek.dts +20 −0
  70. arch/arm/boot/dts/at91-tse850-3.dts +1 −1
  71. arch/arm/boot/dts/at91sam9260.dtsi +1 −1
  72. arch/arm/boot/dts/axp209.dtsi +3 −3
  73. arch/arm/boot/dts/axp22x.dtsi +3 −3
  74. arch/arm/boot/dts/axp81x.dtsi +5 −5
  75. arch/arm/boot/dts/bcm-nsp-ax.dtsi +70 −0
  76. arch/arm/boot/dts/bcm-nsp.dtsi +42 −10
  77. arch/arm/boot/dts/bcm2711-rpi-4-b.dts +9 −29
  78. arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts +138 −0
  79. arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi +113 −0
  80. arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +8 −23
  81. arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts +7 −29
  82. arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +8 −28
  83. arch/arm/boot/dts/bcm2837-rpi-3-b.dts +8 −28
  84. arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi +34 −0
  85. arch/arm/boot/dts/bcm4708-netgear-r6250.dts +38 −1
  86. arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +37 −0
  87. arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +1 −1
  88. arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +1 −1
  89. arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +1 −1
  90. arch/arm/boot/dts/bcm4709-netgear-r7000.dts +1 −1
  91. arch/arm/boot/dts/bcm4709-netgear-r8000.dts +43 −1
  92. arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +1 −1
  93. arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +200 −0
  94. arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +42 −0
  95. arch/arm/boot/dts/bcm47094-linksys-panamera.dts +1 −1
  96. arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +37 −0
  97. arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +37 −0
  98. arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +1 −1
  99. arch/arm/boot/dts/bcm47189-tenda-ac9.dts +37 −0
  100. arch/arm/boot/dts/bcm53016-meraki-mr32.dts +34 −1
  101. arch/arm/boot/dts/bcm5301x.dtsi +5 −5
  102. arch/arm/boot/dts/bcm53573.dtsi +18 −0
  103. arch/arm/boot/dts/bcm94708.dts +1 −1
  104. arch/arm/boot/dts/bcm94709.dts +1 −1
  105. arch/arm/boot/dts/bcm958522er.dts +2 −1
  106. arch/arm/boot/dts/bcm958525er.dts +2 −1
  107. arch/arm/boot/dts/bcm958525xmc.dts +2 −1
  108. arch/arm/boot/dts/bcm958622hr.dts +2 −1
  109. arch/arm/boot/dts/bcm958623hr.dts +2 −1
  110. arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi +281 −0
  111. arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi +163 −0
  112. arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts +25 −0
  113. arch/arm/boot/dts/bcm958625-meraki-mx64.dts +24 −0
  114. arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts +33 −0
  115. arch/arm/boot/dts/bcm958625-meraki-mx64w.dts +32 −0
  116. arch/arm/boot/dts/bcm958625-meraki-mx65.dts +24 −0
  117. arch/arm/boot/dts/bcm958625-meraki-mx65w.dts +32 −0
  118. arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi +129 −0
  119. arch/arm/boot/dts/bcm958625hr.dts +2 −1
  120. arch/arm/boot/dts/bcm958625k.dts +2 −1
  121. arch/arm/boot/dts/bcm988312hr.dts +6 −1
  122. arch/arm/boot/dts/dra7.dtsi +19 −0
  123. arch/arm/boot/dts/e60k02.dtsi +1 −1
  124. arch/arm/boot/dts/e70k02.dtsi +320 −0
  125. arch/arm/boot/dts/emev2-kzm9d.dts +1 −1
  126. arch/arm/boot/dts/exynos3250-rinato.dts +1 −0
  127. arch/arm/boot/dts/exynos4210-i9100.dts +1 −0
  128. arch/arm/boot/dts/exynos4210-origen.dts +12 −12
  129. arch/arm/boot/dts/exynos4210-trats.dts +1 −0
  130. arch/arm/boot/dts/exynos4210-universal_c210.dts +1 −0
  131. arch/arm/boot/dts/exynos4412-i9300.dts +1 −0
  132. arch/arm/boot/dts/exynos4412-i9305.dts +1 −0
  133. arch/arm/boot/dts/exynos4412-n710x.dts +1 −0
  134. arch/arm/boot/dts/exynos4412-origen.dts +7 −7
  135. arch/arm/boot/dts/exynos4412-p4note-n8010.dts +1 −0
  136. arch/arm/boot/dts/exynos4412-trats2.dts +1 −0
  137. arch/arm/boot/dts/exynos5250-arndale.dts +0 −3
  138. arch/arm/boot/dts/exynos5250-snow-rev5.dts +1 −0
  139. arch/arm/boot/dts/exynos5250-snow.dts +1 −0
  140. arch/arm/boot/dts/exynos5250-spring.dts +1 −0
  141. arch/arm/boot/dts/exynos5250.dtsi +0 −1
  142. arch/arm/boot/dts/exynos5420-peach-pit.dts +1 −0
  143. arch/arm/boot/dts/exynos5800-peach-pi.dts +1 −0
  144. arch/arm/boot/dts/gemini-dlink-dir-685.dts +0 −18
  145. arch/arm/boot/dts/gemini-ns2502.dts +148 −0
  146. arch/arm/boot/dts/gemini-sl93512r.dts +0 −18
  147. arch/arm/boot/dts/gemini-sq201.dts +0 −18
  148. arch/arm/boot/dts/gemini-ssi1328.dts +138 −0
  149. arch/arm/boot/dts/gemini-wbd111.dts +0 −18
  150. arch/arm/boot/dts/gemini-wbd222.dts +0 −18
  151. arch/arm/boot/dts/gemini.dtsi +26 −7
  152. arch/arm/boot/dts/imx6dl-alti6p.dts +1 −1
  153. arch/arm/boot/dts/imx6dl-b1x5v2.dtsi +0 −1
  154. arch/arm/boot/dts/imx6dl-prtrvt.dts +0 −2
  155. arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts +1 −0
  156. arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +0 −8
  157. arch/arm/boot/dts/imx6q-skov-revc-lt2.dts +1 −0
  158. arch/arm/boot/dts/imx6qdl-apalis.dtsi +4 −3
  159. arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi +26 −5
  160. arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +11 −1
  161. arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi +99 −0
  162. arch/arm/boot/dts/imx6qdl-tqma6.dtsi +1 −1
  163. arch/arm/boot/dts/imx6qdl.dtsi +3 −4
  164. arch/arm/boot/dts/imx6qp-prtwd3.dts +2 −2
  165. arch/arm/boot/dts/imx6qp.dtsi +1 −1
  166. arch/arm/boot/dts/imx6sl-tolino-vision5.dts +349 −0
  167. arch/arm/boot/dts/imx6sl.dtsi +8 −10
  168. arch/arm/boot/dts/imx6sll-kobo-librah2o.dts +339 −0
  169. arch/arm/boot/dts/imx6sll.dtsi +10 −12
  170. arch/arm/boot/dts/imx6sx.dtsi +3 −3
  171. arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi +11 −1
  172. arch/arm/boot/dts/imx6ul-phytec-segin.dtsi +1 −0
  173. arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts +17 −0
  174. arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi +185 −0
  175. arch/arm/boot/dts/imx6ull-colibri.dtsi +30 −2
  176. arch/arm/boot/dts/imx7-mba7.dtsi +40 −2
  177. arch/arm/boot/dts/imx7-tqma7.dtsi +45 −2
  178. arch/arm/boot/dts/imx7d-mba7.dts +3 −3
  179. arch/arm/boot/dts/imx7d-sdb.dts +1 −1
  180. arch/arm/boot/dts/imx7d-tqma7.dtsi +2 −2
  181. arch/arm/boot/dts/imx7d.dtsi +3 −4
  182. arch/arm/boot/dts/imx7s-mba7.dts +3 −3
  183. arch/arm/boot/dts/imx7s-tqma7.dtsi +2 −2
  184. arch/arm/boot/dts/integrator.dtsi +17 −6
  185. arch/arm/boot/dts/integratorap-im-pd1.dts +7 −2
  186. arch/arm/boot/dts/integratorap.dts +11 −4
  187. arch/arm/boot/dts/integratorcp.dts +6 −3
  188. arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts +2 −0
  189. arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts +2 −0
  190. arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts +2 −0
  191. arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts +2 −0
  192. arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts +2 −0
  193. arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts +2 −0
  194. arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts +2 −0
  195. arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts +2 −0
  196. arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts +2 −0
  197. arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts +2 −0
  198. arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts +2 −0
  199. arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi +8 −0
  200. arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi +2 −0
  201. arch/arm/boot/dts/intel-ixp4xx.dtsi +0 −2
  202. arch/arm/boot/dts/iwg20d-q7-common.dtsi +2 −0
  203. arch/arm/boot/dts/ls1021a-qds.dts +25 −60
  204. arch/arm/boot/dts/ls1021a-tsn.dts +2 −2
  205. arch/arm/boot/dts/ls1021a-twr.dts +7 −56
  206. arch/arm/boot/dts/ls1021a.dtsi +88 −131
  207. arch/arm/boot/dts/mps2.dtsi +8 −2
  208. arch/arm/boot/dts/mstar-v7.dtsi +9 −0
  209. arch/arm/boot/dts/mt7623.dtsi +33 −0
  210. arch/arm/boot/dts/mt7623a.dtsi +4 −0
  211. arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +25 −0
  212. arch/arm/boot/dts/mt7629-rfb.dts +2 −1
  213. arch/arm/boot/dts/mt7629.dtsi +21 −24
  214. arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +2 −2
  215. arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi +1 −1
  216. arch/arm/boot/dts/omap-zoom-common.dtsi +2 −2
  217. arch/arm/boot/dts/omap2430-sdp.dts +2 −2
  218. arch/arm/boot/dts/omap3-cpu-thermal.dtsi +1 −1
  219. arch/arm/boot/dts/omap3-devkit8000-common.dtsi +2 −2
  220. arch/arm/boot/dts/omap3-gta04.dtsi +13 −10
  221. arch/arm/boot/dts/omap3-gta04a5.dts +2 −0
  222. arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi +1 −1
  223. arch/arm/boot/dts/omap3-sb-t35.dtsi +2 −2
  224. arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts +237 −0
  225. arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +5 −5
  226. arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +1 −1
  227. arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +3 −3
  228. arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +3 −3
  229. arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +2 −2
  230. arch/arm/boot/dts/qcom-apq8064.dtsi +28 −35
  231. arch/arm/boot/dts/qcom-apq8084.dtsi +4 −4
  232. arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts +1 −1
  233. arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +0 −1
  234. arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts +1 −1
  235. arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts +1 −1
  236. arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts +1 −1
  237. arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts +1 −1
  238. arch/arm/boot/dts/qcom-ipq8064-ap148.dts +1 −1
  239. arch/arm/boot/dts/qcom-ipq8064-rb3011.dts +4 −4
  240. arch/arm/boot/dts/qcom-ipq8064.dtsi +13 −13
  241. arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi +1 −1
  242. arch/arm/boot/dts/qcom-mdm9615.dtsi +6 −10
  243. arch/arm/boot/dts/qcom-msm8226.dtsi +255 −8
  244. arch/arm/boot/dts/qcom-msm8660-surf.dts +2 −2
  245. arch/arm/boot/dts/qcom-msm8660.dtsi +8 −19
  246. arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts +3 −0
  247. arch/arm/boot/dts/qcom-msm8916-smp.dtsi +62 −0
  248. arch/arm/boot/dts/qcom-msm8960-cdp.dts +2 −2
  249. arch/arm/boot/dts/qcom-msm8960.dtsi +2 −2
  250. arch/arm/boot/dts/qcom-msm8974.dtsi +8 −8
  251. arch/arm/boot/dts/qcom-pm8226.dtsi +27 −0
  252. arch/arm/boot/dts/qcom-pm8841.dtsi +3 −4
  253. arch/arm/boot/dts/qcom-pm8941.dtsi +3 −8
  254. arch/arm/boot/dts/qcom-pma8084.dtsi +3 −8
  255. arch/arm/boot/dts/qcom-sdx55.dtsi +0 −1
  256. arch/arm/boot/dts/r7s72100-genmai.dts +2 −0
  257. arch/arm/boot/dts/r7s72100-gr-peach.dts +2 −0
  258. arch/arm/boot/dts/r7s72100-rskrza1.dts +2 −0
  259. arch/arm/boot/dts/r7s9210-rza2mevb.dts +21 −0
  260. arch/arm/boot/dts/r8a73a4-ape6evm.dts +1 −0
  261. arch/arm/boot/dts/r8a7740-armadillo800eva.dts +3 −0
  262. arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts +2 −0
  263. arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +2 −0
  264. arch/arm/boot/dts/r8a7743-sk-rzg1m.dts +4 −0
  265. arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +2 −0
  266. arch/arm/boot/dts/r8a7745-sk-rzg1e.dts +4 −0
  267. arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts +2 −0
  268. arch/arm/boot/dts/r8a7778-bockw.dts +1 −1
  269. arch/arm/boot/dts/r8a7779-marzen.dts +1 −1
  270. arch/arm/boot/dts/r8a7790-lager.dts +2 −0
  271. arch/arm/boot/dts/r8a7790-stout.dts +2 −0
  272. arch/arm/boot/dts/r8a7791-koelsch.dts +2 −0
  273. arch/arm/boot/dts/r8a7791-porter.dts +2 −0
  274. arch/arm/boot/dts/r8a7793-gose.dts +2 −0
  275. arch/arm/boot/dts/r8a7794-alt.dts +2 −0
  276. arch/arm/boot/dts/r8a7794-silk.dts +2 −0
  277. arch/arm/boot/dts/rk3036.dtsi +5 −5
  278. arch/arm/boot/dts/rk3066a-mk808.dts +27 −0
  279. arch/arm/boot/dts/rk3066a.dtsi +15 −17
  280. arch/arm/boot/dts/rk3188.dtsi +6 −7
  281. arch/arm/boot/dts/rk3229.dtsi +1 −1
  282. arch/arm/boot/dts/rk322x.dtsi +7 −7
  283. arch/arm/boot/dts/rk3288.dtsi +11 −11
  284. arch/arm/boot/dts/rv1108.dtsi +8 −8
  285. arch/arm/boot/dts/s5pv210-fascinate4g.dts +1 −0
  286. arch/arm/boot/dts/s5pv210-galaxys.dts +1 −0
  287. arch/arm/boot/dts/sama5d29.dtsi +16 −0
  288. arch/arm/boot/dts/sama7g5.dtsi +43 −0
  289. arch/arm/boot/dts/sh73a0-kzm9g.dts +1 −1
  290. arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts +112 −0
  291. arch/arm/boot/dts/spear1310.dtsi +0 −6
  292. arch/arm/boot/dts/spear1340.dtsi +0 −2
  293. arch/arm/boot/dts/ste-ab8500.dtsi +4 −9
  294. arch/arm/boot/dts/ste-ab8505.dtsi +4 −9
  295. arch/arm/boot/dts/ste-href.dtsi +6 −0
  296. arch/arm/boot/dts/ste-snowball.dts +6 −0
  297. arch/arm/boot/dts/ste-ux500-samsung-codina.dts +4 −0
  298. arch/arm/boot/dts/ste-ux500-samsung-gavini.dts +4 −0
  299. arch/arm/boot/dts/ste-ux500-samsung-golden.dts +4 −0
  300. arch/arm/boot/dts/ste-ux500-samsung-janice.dts +7 −0
  301. arch/arm/boot/dts/ste-ux500-samsung-kyle.dts +4 −0
  302. arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +18 −20
  303. arch/arm/boot/dts/stm32mp13-pinctrl.dtsi +64 −0
  304. arch/arm/boot/dts/stm32mp131.dtsi +283 −0
  305. arch/arm/boot/dts/stm32mp133.dtsi +37 −0
  306. arch/arm/boot/dts/stm32mp135.dtsi +12 −0
  307. arch/arm/boot/dts/stm32mp135f-dk.dts +56 −0
  308. arch/arm/boot/dts/stm32mp13xc.dtsi +17 −0
  309. arch/arm/boot/dts/stm32mp13xf.dtsi +17 −0
  310. arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +4 −4
  311. arch/arm/boot/dts/stm32mp151.dtsi +9 −9
  312. arch/arm/boot/dts/stm32mp157c-odyssey.dts +6 −0
  313. arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi +1 −1
  314. arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +1 −1
  315. arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +5 −6
  316. arch/arm/boot/dts/sun4i-a10.dtsi +5 −6
  317. arch/arm/boot/dts/sun5i-a13.dtsi +7 −8
  318. arch/arm/boot/dts/sun6i-a31.dtsi +20 −24
  319. arch/arm/boot/dts/sun7i-a20-bananapi.dts +8 −9
  320. arch/arm/boot/dts/sun7i-a20.dtsi +16 −18
  321. arch/arm/boot/dts/sun8i-a33.dtsi +2 −2
  322. arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +1 −1
  323. arch/arm/boot/dts/sun8i-a83t.dtsi +2 −2
  324. arch/arm/boot/dts/sun8i-h3.dtsi +2 −2
  325. arch/arm/boot/dts/sun8i-r40.dtsi +39 −0
  326. arch/arm/boot/dts/sun8i-v3-sl631.dtsi +1 −1
  327. arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +1 −1
  328. arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi +1 −1
  329. arch/arm/boot/dts/tegra114.dtsi +6 −2
  330. arch/arm/boot/dts/tegra124.dtsi +9 −3
  331. arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +5 −2
  332. arch/arm/boot/dts/tegra20-paz00.dts +0 −2
  333. arch/arm/boot/dts/tegra20.dtsi +9 −4
  334. arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +27 −3
  335. arch/arm/boot/dts/tegra30-ouya.dts +4 −1
  336. arch/arm/boot/dts/tegra30.dtsi +9 −3
  337. arch/arm/boot/dts/versatile-ab-ib2.dts +5 −1
  338. arch/arm/boot/dts/versatile-ab.dts +19 −8
  339. arch/arm/mach-qcom/Kconfig +10 −0
  340. arch/arm64/boot/dts/allwinner/axp803.dtsi +5 −5
  341. arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi +3 −3
  342. arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi +1 −1
  343. arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +1 −1
  344. arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts +27 −1
  345. arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +2 −1
  346. arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +17 −0
  347. arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi +1 −1
  348. arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts +8 −1
  349. arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +1 −1
  350. arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi +1 −1
  351. arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +4 −4
  352. arch/arm64/boot/dts/amlogic/Makefile +3 −0
  353. arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts +362 −0
  354. arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts +405 −0
  355. arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +1 −1
  356. arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +1 −1
  357. arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +1 −1
  358. arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi +2 −2
  359. arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +4 −2
  360. arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi +2 −2
  361. arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts +241 −0
  362. arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +61 −0
  363. arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts +1 −1
  364. arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts +1 −1
  365. arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi +5 −1
  366. arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +1 −1
  367. arch/arm64/boot/dts/apple/t8103-j274.dts +23 −0
  368. arch/arm64/boot/dts/apple/t8103.dtsi +207 −0
  369. arch/arm64/boot/dts/arm/juno-motherboard.dtsi +19 −8
  370. arch/arm64/boot/dts/broadcom/Makefile +1 −0
  371. arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts +2 −0
  372. arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +8 −8
  373. arch/arm64/boot/dts/exynos/Makefile +2 −1
  374. arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi +5 −5
  375. arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +1 −0
  376. arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +1 −0
  377. arch/arm64/boot/dts/exynos/exynos5433.dtsi +3 −3
  378. arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi +1189 −0
  379. arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts +56 −0
  380. arch/arm64/boot/dts/exynos/exynosautov9.dtsi +306 −0
  381. arch/arm64/boot/dts/freescale/Makefile +4 −0
  382. arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts +1 −0
  383. arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts +28 −32
  384. arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts +4 −13
  385. arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts +23 −26
  386. arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +18 −13
  387. arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +9 −1
  388. arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +10 −9
  389. arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +45 −27
  390. arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +20 −20
  391. arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +20 −20
  392. arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts +34 −0
  393. arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts +658 −0
  394. arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +12 −12
  395. arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts +29 −3
  396. arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi +3 −1
  397. arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi +1 −1
  398. arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +1 −1
  399. arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +1 −1
  400. arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +24 −0
  401. arch/arm64/boot/dts/freescale/imx8mm.dtsi +180 −0
  402. arch/arm64/boot/dts/freescale/imx8mp.dtsi +1 −1
  403. arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +43 −3
  404. arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts +1 −0
  405. arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +2 −0
  406. arch/arm64/boot/dts/freescale/imx8mq.dtsi +4 −6
  407. arch/arm64/boot/dts/freescale/s32g2.dtsi +124 −0
  408. arch/arm64/boot/dts/freescale/s32g274a-evb.dts +34 −0
  409. arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts +40 −0
  410. arch/arm64/boot/dts/hisilicon/hi3660.dtsi +4 −4
  411. arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts +3 −19
  412. arch/arm64/boot/dts/hisilicon/hi3670.dtsi +1 −1
  413. arch/arm64/boot/dts/hisilicon/hi6220.dtsi +2 −2
  414. arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi +86 −0
  415. arch/arm64/boot/dts/marvell/Makefile +1 −0
  416. arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +458 −0
  417. arch/arm64/boot/dts/mediatek/mt2712e.dtsi +50 −47
  418. arch/arm64/boot/dts/mediatek/mt6358.dtsi +1 −0
  419. arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +7 −9
  420. arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +1 −5
  421. arch/arm64/boot/dts/mediatek/mt7622.dtsi +60 −52
  422. arch/arm64/boot/dts/mediatek/mt8173.dtsi +2 −0
  423. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi +13 −0
  424. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi +13 −0
  425. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi +54 −0
  426. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi +13 −0
  427. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi +13 −0
  428. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi +13 −0
  429. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi +13 −0
  430. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi +32 −0
  431. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts +1 −0
  432. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts +1 −0
  433. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi +1 −0
  434. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts +1 −0
  435. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts +1 −0
  436. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts +1 −0
  437. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts +1 −0
  438. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts +1 −0
  439. arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts +1 −0
  440. arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi +1 −0
  441. arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi +5 −0
  442. arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +63 −4
  443. arch/arm64/boot/dts/mediatek/mt8183.dtsi +96 −3
  444. arch/arm64/boot/dts/mediatek/mt8192.dtsi +163 −0
  445. arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +0 −2
  446. arch/arm64/boot/dts/nvidia/tegra132.dtsi +9 −3
  447. arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +1399 −155
  448. arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts +505 −1
  449. arch/arm64/boot/dts/nvidia/tegra186.dtsi +136 −0
  450. arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +1368 −127
  451. arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi +1383 −139
  452. arch/arm64/boot/dts/nvidia/tegra194.dtsi +204 −5
  453. arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +876 −0
  454. arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +876 −0
  455. arch/arm64/boot/dts/nvidia/tegra210.dtsi +79 −2
  456. arch/arm64/boot/dts/qcom/Makefile +12 −0
  457. arch/arm64/boot/dts/qcom/apq8016-sbc.dts +831 −1
  458. arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +0 −826
  459. arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts +1 −0
  460. arch/arm64/boot/dts/qcom/apq8096-db820c.dts +1069 −1
  461. arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +0 −1105
  462. arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +0 −3
  463. arch/arm64/boot/dts/qcom/ipq6018.dtsi +87 −6
  464. arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +6 −0
  465. arch/arm64/boot/dts/qcom/ipq8074.dtsi +76 −16
  466. arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +1 −0
  467. arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +126 −0
  468. arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +1 −0
  469. arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +44 −19
  470. arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +1 −0
  471. arch/arm64/boot/dts/qcom/msm8916-mtp.dts +14 −1
  472. arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi +0 −21
  473. arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +1 −0
  474. arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +1 −0
  475. arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +534 −0
  476. arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +1 −0
  477. arch/arm64/boot/dts/qcom/msm8916.dtsi +73 −16
  478. arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +2 −0
  479. arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts +1 −0
  480. arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +2 −0
  481. arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts +1 −0
  482. arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts +1 −0
  483. arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts +1 −0
  484. arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts +1 −0
  485. arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts +1 −0
  486. arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts +1 −0
  487. arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts +1 −0
  488. arch/arm64/boot/dts/qcom/msm8994.dtsi +1 −1
  489. arch/arm64/boot/dts/qcom/msm8996-mtp.dts +23 −1
  490. arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi +0 −30
  491. arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts +1 −0
  492. arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts +1 −0
  493. arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts +1 −0
  494. arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +1 −0
  495. arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +673 −0
  496. arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +465 −0
  497. arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts +432 −0
  498. arch/arm64/boot/dts/qcom/msm8996.dtsi +86 −10
  499. arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts +1 −0
  500. arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +2 −0
  501. arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +320 −0
  502. arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts +1 −0
  503. arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts +1 −0
  504. arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +0 −4
  505. arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts +1 −0
  506. arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +0 −4
  507. arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts +1 −0
  508. arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts +31 −0
  509. arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts +55 −0
  510. arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts +36 −0
  511. arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +670 −0
  512. arch/arm64/boot/dts/qcom/msm8998.dtsi +200 −23
  513. arch/arm64/boot/dts/qcom/pm6150l.dtsi +1 −0
  514. arch/arm64/boot/dts/qcom/pm6350.dtsi +54 −0
  515. arch/arm64/boot/dts/qcom/pm660.dtsi +3 −2
  516. arch/arm64/boot/dts/qcom/pm660l.dtsi +0 −7
  517. arch/arm64/boot/dts/qcom/pm8916.dtsi +12 −6
  518. arch/arm64/boot/dts/qcom/pm8994.dtsi +4 −9
  519. arch/arm64/boot/dts/qcom/pmi8994.dtsi +1 −4
  520. arch/arm64/boot/dts/qcom/pmi8998.dtsi +12 −0
  521. arch/arm64/boot/dts/qcom/pmk8350.dtsi +1 −0
  522. arch/arm64/boot/dts/qcom/qcs404.dtsi +6 −1
  523. arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +2 −2
  524. arch/arm64/boot/dts/qcom/sa8155p-adp.dts +10 −2
  525. arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts +14 −0
  526. arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +2 −1
  527. arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts +20 −0
  528. arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts +15 −0
  529. arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +336 −0
  530. arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +13 −0
  531. arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi +11 −0
  532. arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi +109 −0
  533. arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts +8 −0
  534. arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts +8 −0
  535. arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +5 −4
  536. arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +1 −0
  537. arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi +90 −0
  538. arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +2 −99
  539. arch/arm64/boot/dts/qcom/sc7180.dtsi +52 −33
  540. arch/arm64/boot/dts/qcom/sc7280-herobrine.dts +14 −0
  541. arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +1412 −0
  542. arch/arm64/boot/dts/qcom/sc7280-idp.dts +12 −0
  543. arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +265 −6
  544. arch/arm64/boot/dts/qcom/sc7280-idp2.dts +8 −0
  545. arch/arm64/boot/dts/qcom/sc7280.dtsi +2769 −793
  546. arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts +1 −0
  547. arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts +1 −0
  548. arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts +1 −0
  549. arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts +1 −0
  550. arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +4 −4
  551. arch/arm64/boot/dts/qcom/sdm630.dtsi +57 −1
  552. arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +1 −0
  553. arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +12 −5
  554. arch/arm64/boot/dts/qcom/sdm845-db845c.dts +11 −5
  555. arch/arm64/boot/dts/qcom/sdm845-mtp.dts +10 −8
  556. arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +17 −9
  557. arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +1 −0
  558. arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +1 −0
  559. arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +11 −8
  560. arch/arm64/boot/dts/qcom/sdm845.dtsi +73 −170
  561. arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +16 −5
  562. arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +1 −0
  563. arch/arm64/boot/dts/qcom/sm6125.dtsi +32 −27
  564. arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +58 −0
  565. arch/arm64/boot/dts/qcom/sm6350.dtsi +965 −0
  566. arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +320 −0
  567. arch/arm64/boot/dts/qcom/sm7225.dtsi +16 −0
  568. arch/arm64/boot/dts/qcom/sm8150-hdk.dts +0 −2
  569. arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts +1 −2
  570. arch/arm64/boot/dts/qcom/sm8150-mtp.dts +0 −2
  571. arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts +1 −0
  572. arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts +1 −0
  573. arch/arm64/boot/dts/qcom/sm8150.dtsi +142 −19
  574. arch/arm64/boot/dts/qcom/sm8250-hdk.dts +0 −2
  575. arch/arm64/boot/dts/qcom/sm8250-mtp.dts +0 −2
  576. arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts +1 −0
  577. arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +1 −0
  578. arch/arm64/boot/dts/qcom/sm8250.dtsi +26 −26
  579. arch/arm64/boot/dts/qcom/sm8350-hdk.dts +0 −2
  580. arch/arm64/boot/dts/qcom/sm8350-mtp.dts +4 −2
  581. arch/arm64/boot/dts/qcom/sm8350.dtsi +282 −20
  582. arch/arm64/boot/dts/renesas/Makefile +2 −0
  583. arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi +3 −0
  584. arch/arm64/boot/dts/renesas/cat875.dtsi +2 −0
  585. arch/arm64/boot/dts/renesas/draak.dtsi +686 −0
  586. arch/arm64/boot/dts/renesas/ebisu.dtsi +803 −0
  587. arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +2 −0
  588. arch/arm64/boot/dts/renesas/r8a77961.dtsi +11 −0
  589. arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +4 −0
  590. arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +4 −0
  591. arch/arm64/boot/dts/renesas/r8a77980-condor.dts +4 −0
  592. arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +4 −0
  593. arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +1 −787
  594. arch/arm64/boot/dts/renesas/r8a77995-draak.dts +1 −670
  595. arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi +70 −0
  596. arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +2 −0
  597. arch/arm64/boot/dts/renesas/r8a779a0.dtsi +1458 −0
  598. arch/arm64/boot/dts/renesas/r8a779m0.dtsi +12 −0
  599. arch/arm64/boot/dts/renesas/r8a779m1.dtsi +9 −0
  600. arch/arm64/boot/dts/renesas/r8a779m2.dtsi +12 −0
  601. arch/arm64/boot/dts/renesas/r8a779m3.dtsi +9 −0
  602. arch/arm64/boot/dts/renesas/r8a779m4.dtsi +12 −0
  603. arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts +36 −0
  604. arch/arm64/boot/dts/renesas/r8a779m5.dtsi +21 −0
  605. arch/arm64/boot/dts/renesas/r8a779m6.dtsi +12 −0
  606. arch/arm64/boot/dts/renesas/r8a779m7.dtsi +12 −0
  607. arch/arm64/boot/dts/renesas/r8a779m8.dtsi +12 −0
  608. arch/arm64/boot/dts/renesas/r9a07g044.dtsi +337 −0
  609. arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts +1 −6
  610. arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi +275 −0
  611. arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi +289 −3
  612. arch/arm64/boot/dts/renesas/salvator-common.dtsi +30 −26
  613. arch/arm64/boot/dts/renesas/ulcb.dtsi +2 −0
  614. arch/arm64/boot/dts/rockchip/Makefile +6 −0
  615. arch/arm64/boot/dts/rockchip/px30-evb.dts +52 −0
  616. arch/arm64/boot/dts/rockchip/px30.dtsi +120 −6
  617. arch/arm64/boot/dts/rockchip/rk3308.dtsi +43 −6
  618. arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts +0 −3
  619. arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +27 −1
  620. arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts +110 −0
  621. arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +1 −1
  622. arch/arm64/boot/dts/rockchip/rk3328.dtsi +6 −11
  623. arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi +33 −14
  624. arch/arm64/boot/dts/rockchip/rk3368.dtsi +182 −9
  625. arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +1 −0
  626. arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +176 −0
  627. arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +1 −0
  628. arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts +41 −0
  629. arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +182 −0
  630. arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +2 −2
  631. arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts +36 −0
  632. arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi +3 −3
  633. arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi +3 −3
  634. arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +2 −5
  635. arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts +218 −0
  636. arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +54 −0
  637. arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts +14 −0
  638. arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts +47 −0
  639. arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +29 −0
  640. arch/arm64/boot/dts/rockchip/rk3399.dtsi +104 −12
  641. arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts +548 −0
  642. arch/arm64/boot/dts/rockchip/rk3566.dtsi +20 −0
  643. arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +313 −0
  644. arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi +9 −0
  645. arch/arm64/boot/dts/rockchip/rk3568.dtsi +74 −570
  646. arch/arm64/boot/dts/rockchip/rk356x.dtsi +1145 −0
  647. arch/arm64/boot/dts/ti/Makefile +3 −1
  648. arch/arm64/boot/dts/ti/k3-am64-main.dtsi +280 −0
  649. arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi +8 −0
  650. arch/arm64/boot/dts/ti/k3-am64.dtsi +2 −0
  651. arch/arm64/boot/dts/ti/k3-am642-evm.dts +8 −0
  652. arch/arm64/boot/dts/ti/k3-am642-sk.dts +8 −0
  653. arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi +46 −0
  654. arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi +51 −0
  655. arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +28 −11
  656. arch/arm64/boot/dts/ti/k3-am65-main.dtsi +4 −4
  657. arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +0 −4
  658. arch/arm64/boot/dts/ti/k3-am65.dtsi +2 −0
  659. arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi +60 −0
  660. arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts +24 −0
  661. arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts +7 −49
  662. arch/arm64/boot/dts/ti/k3-am654.dtsi +4 −0
  663. arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi +56 −0
  664. arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts +29 −0
  665. arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts +7 −43
  666. arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +3 −0
  667. arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +4 −3
  668. arch/arm64/boot/dts/ti/k3-j7200.dtsi +2 −0
  669. arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +3 −0
  670. arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +8 −8
  671. arch/arm64/boot/dts/ti/k3-j721e-sk.dts +1002 −0
  672. arch/arm64/boot/dts/ti/k3-j721e.dtsi +3 −0
  673. arch/arm64/boot/dts/toshiba/Makefile +1 −0
  674. arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts +6 −0
  675. arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts +61 −0
  676. arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi +44 −0
  677. arch/arm64/boot/dts/toshiba/tmpv7708.dtsi +59 −0
  678. arch/arm64/boot/dts/xilinx/Makefile +14 −0
  679. arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi +12 −1
  680. arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts +315 −0
  681. arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts +298 −0
  682. arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts +289 −0
  683. arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts +21 −0
  684. arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts +15 −1
  685. arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts +15 −1
  686. arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts +17 −1
  687. arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts +297 −1
  688. arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts +337 −5
  689. arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts +48 −1
  690. arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts +23 −1
  691. arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts +329 −1
  692. arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +258 −6
  693. arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts +15 −0
  694. arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +318 −2
  695. arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts +2 −1
  696. arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts +282 −10
  697. arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts +239 −11
  698. arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +327 −13
  699. arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +264 −10
  700. arch/arm64/boot/dts/xilinx/zynqmp.dtsi +61 −32
  701. drivers/watchdog/mtk_wdt.c +3 −3
  702. include/dt-bindings/power/imx8mm-power.h +9 −0
  703. include/dt-bindings/reset/mt2712-resets.h +0 −0
  704. include/dt-bindings/reset/mt8173-resets.h +2 −0
  705. include/dt-bindings/reset/mt8183-resets.h +3 −0
  706. include/dt-bindings/reset/mt8192-resets.h +0 −0
.mailmap+1−0
@@ -279,6 +279,7 @@ Nicolas Pitre <nico@fluxnic.net> <nicolas.pitre@linaro.org> · 278 unmodified lines
279Nicolas Pitre <nico@fluxnic.net> <nico@linaro.org>279Nicolas Pitre <nico@fluxnic.net> <nico@linaro.org>
280Nicolas Saenz Julienne <nsaenz@kernel.org> <nsaenzjulienne@suse.de>280Nicolas Saenz Julienne <nsaenz@kernel.org> <nsaenzjulienne@suse.de>
281Nicolas Saenz Julienne <nsaenz@kernel.org> <nsaenzjulienne@suse.com>281Nicolas Saenz Julienne <nsaenz@kernel.org> <nsaenzjulienne@suse.com>
282Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
282Oleksij Rempel <linux@rempel-privat.de> <bug-track@fisher-privat.net>283Oleksij Rempel <linux@rempel-privat.de> <bug-track@fisher-privat.net>
283Oleksij Rempel <linux@rempel-privat.de> <external.Oleksij.Rempel@de.bosch.com>284Oleksij Rempel <linux@rempel-privat.de> <external.Oleksij.Rempel@de.bosch.com>
284Oleksij Rempel <linux@rempel-privat.de> <fixed-term.Oleksij.Rempel@de.bosch.com>285Oleksij Rempel <linux@rempel-privat.de> <fixed-term.Oleksij.Rempel@de.bosch.com>
Documentation/devicetree/bindings/arm/amlogic.yaml+3−0
@@ -86,6 +86,7 @@ properties: · 85 unmodified lines
86 - enum:86 - enum:
87 - amlogic,p28187 - amlogic,p281
88 - oranth,tx3-mini88 - oranth,tx3-mini
89 - jethome,jethub-j80
89 - const: amlogic,s905w90 - const: amlogic,s905w
90 - const: amlogic,meson-gxl91 - const: amlogic,meson-gxl
91 92
@@ -133,6 +134,7 @@ properties: · 41 unmodified lines
133 items:134 items:
134 - enum:135 - enum:
135 - amlogic,s400136 - amlogic,s400
137 - jethome,jethub-j100
136 - const: amlogic,a113d138 - const: amlogic,a113d
137 - const: amlogic,meson-axg139 - const: amlogic,meson-axg
138 140
@@ -141,6 +143,7 @@ properties: · 2 unmodified lines
141 - enum:143 - enum:
142 - amediatech,x96-max144 - amediatech,x96-max
143 - amlogic,u200145 - amlogic,u200
146 - radxa,zero
144 - seirobotics,sei510147 - seirobotics,sei510
145 - const: amlogic,g12a148 - const: amlogic,g12a
146 149
Documentation/devicetree/bindings/arm/atmel-at91.yaml+12−0
@@ -126,6 +126,18 @@ properties: · 125 unmodified lines
126 - const: atmel,sama5d3126 - const: atmel,sama5d3
127 - const: atmel,sama5127 - const: atmel,sama5
128 128
129 - description: CalAmp LMU5000 board
130 items:
131 - const: calamp,lmu5000
132 - const: atmel,at91sam9g20
133 - const: atmel,at91sam9
134
135 - description: Exegin Q5xR5 board
136 items:
137 - const: exegin,q5xr5
138 - const: atmel,at91sam9g20
139 - const: atmel,at91sam9
140
129 - items:141 - items:
130 - enum:142 - enum:
131 - atmel,sama5d31143 - atmel,sama5d31
Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml+1−0
@@ -19,6 +19,7 @@ properties: · 18 unmodified lines
19 items:19 items:
20 - enum:20 - enum:
21 - raspberrypi,40021 - raspberrypi,400
22 - raspberrypi,4-compute-module
22 - raspberrypi,4-model-b23 - raspberrypi,4-model-b
23 - const: brcm,bcm271124 - const: brcm,bcm2711
24 25
Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml+55−10
@@ -22,16 +22,61 @@ properties: · 21 unmodified lines
22 $nodename:22 $nodename:
23 const: '/'23 const: '/'
24 compatible:24 compatible:
25 items:25 oneOf:
26 - enum:26 - description: BCM58522 based boards
27 - brcm,bcm5852227 items:
28 - brcm,bcm5852528 - enum:
29 - brcm,bcm5853529 - brcm,bcm958522er
30 - brcm,bcm5862230 - const: brcm,bcm58522
31 - brcm,bcm5862331 - const: brcm,nsp
32 - brcm,bcm5862532
33 - brcm,bcm8831233 - description: BCM58525 based boards
34 - const: brcm,nsp34 items:
35 - enum:
36 - brcm,bcm958525er
37 - brcm,bcm958525xmc
38 - const: brcm,bcm58525
39 - const: brcm,nsp
40
41 - description: BCM58535 based boards
42 items:
43 - const: brcm,bcm58535
44 - const: brcm,nsp
45
46 - description: BCM58622 based boards
47 items:
48 - enum:
49 - brcm,bcm958622hr
50 - const: brcm,bcm58622
51 - const: brcm,nsp
52
53 - description: BCM58623 based boards
54 items:
55 - enum:
56 - brcm,bcm958623hr
57 - const: brcm,bcm58623
58 - const: brcm,nsp
59
60 - description: BCM58625 based boards
61 items:
62 - enum:
63 - brcm,bcm958625hr
64 - brcm,bcm958625k
65 - meraki,mx64
66 - meraki,mx64-a0
67 - meraki,mx64w
68 - meraki,mx64w-a0
69 - meraki,mx65
70 - meraki,mx65w
71 - const: brcm,bcm58625
72 - const: brcm,nsp
73
74 - description: BCM88312 based boards
75 items:
76 - enum:
77 - brcm,bcm988312hr
78 - const: brcm,bcm88312
79 - const: brcm,nsp
35 80
36additionalProperties: true81additionalProperties: true
37 82
Documentation/devicetree/bindings/arm/cpus.yaml+2−0
@@ -171,6 +171,8 @@ properties: · 170 unmodified lines
171 - qcom,kryo385171 - qcom,kryo385
172 - qcom,kryo468172 - qcom,kryo468
173 - qcom,kryo485173 - qcom,kryo485
174 - qcom,kryo560
175 - qcom,kryo570
174 - qcom,kryo685176 - qcom,kryo685
175 - qcom,scorpion177 - qcom,scorpion
176 178
Documentation/devicetree/bindings/arm/fsl.yaml+61−38
@@ -235,7 +235,7 @@ properties: · 234 unmodified lines
235 - technexion,imx6q-pico-pi # TechNexion i.MX6Q Pico-Pi235 - technexion,imx6q-pico-pi # TechNexion i.MX6Q Pico-Pi
236 - technologic,imx6q-ts4900236 - technologic,imx6q-ts4900
237 - technologic,imx6q-ts7970237 - technologic,imx6q-ts7970
238 - toradex,apalis_imx6q # Apalis iMX6 Module238 - toradex,apalis_imx6q # Apalis iMX6 Modules
239 - udoo,imx6q-udoo # Udoo i.MX6 Quad Board239 - udoo,imx6q-udoo # Udoo i.MX6 Quad Board
240 - uniwest,imx6q-evi # Uniwest Evi240 - uniwest,imx6q-evi # Uniwest Evi
241 - variscite,dt6customboard241 - variscite,dt6customboard
@@ -314,18 +314,12 @@ properties: · 72 unmodified lines
314 - const: phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad314 - const: phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
315 - const: fsl,imx6q315 - const: fsl,imx6q
316 316
317 - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Module317 - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Modules
318 items:318 items:
319 - enum:319 - enum:
320 - toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board320 - toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board
321 - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board321 - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board
322 - const: toradex,apalis_imx6q322 - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board
323 - const: fsl,imx6q
324
325 - description: i.MX6Q Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1
326 items:
327 - const: toradex,apalis_imx6q-ixora-v1.1
328 - const: toradex,apalis_imx6q-ixora
329 - const: toradex,apalis_imx6q323 - const: toradex,apalis_imx6q
330 - const: fsl,imx6q324 - const: fsl,imx6q
331 325
@@ -393,6 +387,8 @@ properties: · 61 unmodified lines
393 - technexion,imx6dl-pico-pi # TechNexion i.MX6DL Pico-Pi387 - technexion,imx6dl-pico-pi # TechNexion i.MX6DL Pico-Pi
394 - technologic,imx6dl-ts4900388 - technologic,imx6dl-ts4900
395 - technologic,imx6dl-ts7970389 - technologic,imx6dl-ts7970
390 - toradex,colibri_imx6dl # Colibri iMX6 Modules
391 - toradex,colibri_imx6dl-v1_1 # Colibri iMX6 V1.1 Modules
396 - udoo,imx6dl-udoo # Udoo i.MX6 Dual-lite Board392 - udoo,imx6dl-udoo # Udoo i.MX6 Dual-lite Board
397 - vdl,lanmcu # Van der Laan LANMCU board393 - vdl,lanmcu # Van der Laan LANMCU board
398 - wand,imx6dl-wandboard # Wandboard i.MX6 Dual Lite Board394 - wand,imx6dl-wandboard # Wandboard i.MX6 Dual Lite Board
@@ -466,20 +462,18 @@ properties: · 67 unmodified lines
466 - const: phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 Quad462 - const: phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
467 - const: fsl,imx6dl463 - const: fsl,imx6dl
468 464
469 - description: i.MX6DL Toradex Colibri iMX6 Module on Colibri465 - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S Modules
470 Evaluation Board V3
471 items:466 items:
472 - const: toradex,colibri_imx6dl-eval-v3467 - enum:
473 - const: toradex,colibri_imx6dl # Colibri iMX6 Module468 - toradex,colibri_imx6dl-eval-v3 # Colibri iMX6DL/S Module on Colibri Evaluation Board V3
469 - const: toradex,colibri_imx6dl # Colibri iMX6DL/S Module
474 - const: fsl,imx6dl470 - const: fsl,imx6dl
475 471
476 - description: i.MX6DL Toradex Colibri iMX6 Module V1.1 on Colibri472 - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S V1.1 Modules
477 Evaluation Board V3
478 items:473 items:
479 - const: toradex,colibri_imx6dl-v1_1-eval-v3474 - enum:
480 - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6 Module V1.1475 - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6DL/S V1.1 M. on Colibri Evaluation Board V3
481 - const: toradex,colibri_imx6dl-eval-v3476 - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6DL/S V1.1 Module
482 - const: toradex,colibri_imx6dl # Colibri iMX6 Module
483 - const: fsl,imx6dl477 - const: fsl,imx6dl
484 478
485 - description: i.MX6S DHCOM DRC02 Board479 - description: i.MX6S DHCOM DRC02 Board
@@ -494,6 +488,7 @@ properties: · 8 unmodified lines
494 - fsl,imx6sl-evk # i.MX6 SoloLite EVK Board488 - fsl,imx6sl-evk # i.MX6 SoloLite EVK Board
495 - kobo,tolino-shine2hd489 - kobo,tolino-shine2hd
496 - kobo,tolino-shine3490 - kobo,tolino-shine3
491 - kobo,tolino-vision5
497 - revotics,imx6sl-warp # Revotics WaRP Board492 - revotics,imx6sl-warp # Revotics WaRP Board
498 - const: fsl,imx6sl493 - const: fsl,imx6sl
499 494
@@ -502,6 +497,7 @@ properties: · 2 unmodified lines
502 - enum:497 - enum:
503 - fsl,imx6sll-evk498 - fsl,imx6sll-evk
504 - kobo,clarahd499 - kobo,clarahd
500 - kobo,librah2o
505 - const: fsl,imx6sll501 - const: fsl,imx6sll
506 502
507 - description: i.MX6SX based Boards503 - description: i.MX6SX based Boards
@@ -586,8 +582,9 @@ properties: · 78 unmodified lines
586 - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board582 - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board
587 - kontron,imx6ull-n6411-som # Kontron N6411 SOM583 - kontron,imx6ull-n6411-som # Kontron N6411 SOM
588 - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board584 - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
589 - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Eval Board585 - toradex,colibri-imx6ull # Colibri iMX6ULL Modules
590 - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board586 - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
587 - toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Modules
591 - const: fsl,imx6ull588 - const: fsl,imx6ull
592 589
593 - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board590 - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board
@@ -605,6 +602,27 @@ properties: · 11 unmodified lines
605 - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL602 - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL
606 - const: fsl,imx6ull603 - const: fsl,imx6ull
607 604
605 - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules
606 items:
607 - enum:
608 - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board
609 - const: toradex,colibri-imx6ull # Colibri iMX6ULL Module
610 - const: fsl,imx6dl
611
612 - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module
613 items:
614 - enum:
615 - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1GB (eMMC) M. on Colibri Evaluation Board
616 - const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
617 - const: fsl,imx6dl
618
619 - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules
620 items:
621 - enum:
622 - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Evaluation Board
623 - const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module
624 - const: fsl,imx6dl
625
608 - description: Kontron N6411 S Board626 - description: Kontron N6411 S Board
609 items:627 items:
610 - const: kontron,imx6ull-n6411-s628 - const: kontron,imx6ull-n6411-s
@@ -622,6 +640,7 @@ properties: · 11 unmodified lines
622 items:640 items:
623 - enum:641 - enum:
624 - element14,imx7s-warp # Element14 Warp i.MX7 Board642 - element14,imx7s-warp # Element14 Warp i.MX7 Board
643 - toradex,colibri-imx7s # Colibri iMX7S Module
625 - const: fsl,imx7s644 - const: fsl,imx7s
626 645
627 - description: i.MX7S Boards with Toradex Colibri iMX7S Module646 - description: i.MX7S Boards with Toradex Colibri iMX7S Module
@@ -653,15 +672,8 @@ properties: · 25 unmodified lines
653 - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit672 - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit
654 - technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph673 - technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph
655 - technexion,imx7d-pico-pi # TechNexion i.MX7D Pico-Pi674 - technexion,imx7d-pico-pi # TechNexion i.MX7D Pico-Pi
656 - toradex,colibri-imx7d # Colibri iMX7 Dual Module675 - toradex,colibri-imx7d # Colibri iMX7D Module
657 - toradex,colibri-imx7d-aster # Colibri iMX7 Dual Module on Aster Carrier Board676 - toradex,colibri-imx7d-emmc # Colibri iMX7D 1GB (eMMC) Module
658 - toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module
659 - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on
660 # Aster Carrier Board
661 - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on
662 # Colibri Evaluation Board V3
663 - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on
664 # Colibri Evaluation Board V3
665 - zii,imx7d-rmu2 # ZII RMU2 Board677 - zii,imx7d-rmu2 # ZII RMU2 Board
666 - zii,imx7d-rpu2 # ZII RPU2 Board678 - zii,imx7d-rpu2 # ZII RPU2 Board
667 - const: fsl,imx7d679 - const: fsl,imx7d
@@ -686,12 +698,12 @@ properties: · 18 unmodified lines
686 - description: i.MX7D Boards with Toradex Colibri i.MX7D Module698 - description: i.MX7D Boards with Toradex Colibri i.MX7D Module
687 items:699 items:
688 - enum:700 - enum:
689 - toradex,colibri-imx7d-aster # Module on Aster Carrier Board701 - toradex,colibri-imx7d-aster # Colibri iMX7D Module on Aster Carrier Board
690 - toradex,colibri-imx7d-eval-v3 # Module on Colibri Evaluation Board V3702 - toradex,colibri-imx7d-eval-v3 # Colibri iMX7D Module on Colibri Evaluation Board V3
691 - const: toradex,colibri-imx7d703 - const: toradex,colibri-imx7d
692 - const: fsl,imx7d704 - const: fsl,imx7d
693 705
694 - description: i.MX7D Boards with Toradex Colibri i.MX7D eMMC Module706 - description: i.MX7D Boards with Toradex Colibri i.MX7D 1GB (eMMC) Module
695 items:707 items:
696 - enum:708 - enum:
697 - toradex,colibri-imx7d-emmc-aster # Module on Aster Carrier Board709 - toradex,colibri-imx7d-emmc-aster # Module on Aster Carrier Board
@@ -812,10 +824,10 @@ properties: · 114 unmodified lines
812 - enum:824 - enum:
813 - einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board825 - einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board
814 - fsl,imx8qxp-mek # i.MX8QXP MEK Board826 - fsl,imx8qxp-mek # i.MX8QXP MEK Board
815 - toradex,colibri-imx8x # Colibri iMX8X Module827 - toradex,colibri-imx8x # Colibri iMX8X Modules
816 - const: fsl,imx8qxp828 - const: fsl,imx8qxp
817 829
818 - description: Toradex Colibri i.MX8 Evaluation Board830 - description: i.MX8QXP Boards with Toradex Coilbri iMX8X Modules
819 items:831 items:
820 - enum:832 - enum:
821 - toradex,colibri-imx8x-eval-v3 # Colibri iMX8X Module on Colibri Evaluation Board V3833 - toradex,colibri-imx8x-eval-v3 # Colibri iMX8X Module on Colibri Evaluation Board V3
@@ -847,9 +859,10 @@ properties: · 25 unmodified lines
847 - description: VF610 based Boards859 - description: VF610 based Boards
848 items:860 items:
849 - enum:861 - enum:
862 - fsl,vf610-twr # VF610 Tower Board
850 - lwn,bk4 # Liebherr BK4 controller863 - lwn,bk4 # Liebherr BK4 controller
851 - phytec,vf610-cosmic # PHYTEC Cosmic/Cosmic+ Board864 - phytec,vf610-cosmic # PHYTEC Cosmic/Cosmic+ Board
852 - fsl,vf610-twr # VF610 Tower Board865 - toradex,vf610-colibri_vf61 # Colibri VF61 Modules
853 - const: fsl,vf610866 - const: fsl,vf610
854 867
855 - description: Toradex Colibri VF61 Module on Colibri Evaluation Board868 - description: Toradex Colibri VF61 Module on Colibri Evaluation Board
@@ -886,6 +899,7 @@ properties: · 30 unmodified lines
886 - enum:899 - enum:
887 - fsl,ls1021a-moxa-uc-8410a900 - fsl,ls1021a-moxa-uc-8410a
888 - fsl,ls1021a-qds901 - fsl,ls1021a-qds
902 - fsl,ls1021a-tsn
889 - fsl,ls1021a-twr903 - fsl,ls1021a-twr
890 - const: fsl,ls1021a904 - const: fsl,ls1021a
891 905
@@ -977,6 +991,8 @@ properties: · 85 unmodified lines
977 - description: LX2160A based Boards991 - description: LX2160A based Boards
978 items:992 items:
979 - enum:993 - enum:
994 - fsl,lx2160a-bluebox3
995 - fsl,lx2160a-bluebox3-rev-a
980 - fsl,lx2160a-qds996 - fsl,lx2160a-qds
981 - fsl,lx2160a-rdb997 - fsl,lx2160a-rdb
982 - fsl,lx2162a-qds998 - fsl,lx2162a-qds
@@ -990,6 +1006,13 @@ properties: · 7 unmodified lines
990 - const: solidrun,lx2160a-cex71006 - const: solidrun,lx2160a-cex7
991 - const: fsl,lx2160a1007 - const: fsl,lx2160a
992 1008
1009 - description: S32G2 based Boards
1010 items:
1011 - enum:
1012 - nxp,s32g274a-evb
1013 - nxp,s32g274a-rdb2
1014 - const: nxp,s32g2
1015
993 - description: S32V234 based Boards1016 - description: S32V234 based Boards
994 items:1017 items:
995 - enum:1018 - enum:
Documentation/devicetree/bindings/arm/mediatek.yaml+1−0
@@ -32,6 +32,7 @@ properties: · 31 unmodified lines
32 - const: mediatek,mt658032 - const: mediatek,mt6580
33 - items:33 - items:
34 - enum:34 - enum:
35 - fairphone,fp1
35 - mundoreader,bq-aquaris536 - mundoreader,bq-aquaris5
36 - const: mediatek,mt658937 - const: mediatek,mt6589
37 - items:38 - items:
Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml+4−0
@@ -43,6 +43,9 @@ properties: · 42 unmodified lines
43 "#clock-cells":43 "#clock-cells":
44 const: 144 const: 1
45 45
46 '#reset-cells':
47 const: 1
48
46required:49required:
47 - compatible50 - compatible
48 - reg51 - reg
@@ -56,4 +59,5 @@ examples: · 7 unmodified lines
56 compatible = "mediatek,mt8173-mmsys", "syscon";59 compatible = "mediatek,mt8173-mmsys", "syscon";
57 reg = <0x14000000 0x1000>;60 reg = <0x14000000 0x1000>;
58 #clock-cells = <1>;61 #clock-cells = <1>;
62 #reset-cells = <1>;
59 };63 };
Documentation/devicetree/bindings/arm/qcom.yaml+23−0
@@ -25,6 +25,7 @@ description: | · 24 unmodified lines
25 The 'SoC' element must be one of the following strings:25 The 'SoC' element must be one of the following strings:
26 26
27 apq801627 apq8016
28 apq8026
28 apq807429 apq8074
29 apq808430 apq8084
30 apq809631 apq8096
@@ -44,6 +45,8 @@ description: | · 13 unmodified lines
44 sdm66045 sdm660
45 sdm84546 sdm845
46 sdx5547 sdx55
48 sdx65
49 sm7225
47 sm815050 sm8150
48 sm825051 sm8250
49 sm835052 sm8350
@@ -94,6 +97,14 @@ properties: · 44 unmodified lines
94 97
95 - items:98 - items:
96 - enum:99 - enum:
100 - lg,lenok
101 - const: qcom,apq8026
102
103 - items:
104 - enum:
105 - asus,nexus7-flo
106 - lg,nexus4-mako
107 - sony,xperia-yuga
97 - qcom,apq8064-cm-qs600108 - qcom,apq8064-cm-qs600
98 - qcom,apq8064-ifc6410109 - qcom,apq8064-ifc6410
99 - const: qcom,apq8064110 - const: qcom,apq8064
@@ -129,6 +140,7 @@ properties: · 29 unmodified lines
129 - enum:140 - enum:
130 - fairphone,fp2141 - fairphone,fp2
131 - lge,hammerhead142 - lge,hammerhead
143 - samsung,klte
132 - sony,xperia-amami144 - sony,xperia-amami
133 - sony,xperia-castor145 - sony,xperia-castor
134 - sony,xperia-honami146 - sony,xperia-honami
@@ -163,6 +175,7 @@ properties: · 28 unmodified lines
163 175
164 - items:176 - items:
165 - enum:177 - enum:
178 - qcom,ipq4019-ap-dk01.1-c1
166 - qcom,ipq4019-ap-dk04.1-c3179 - qcom,ipq4019-ap-dk04.1-c3
167 - qcom,ipq4019-ap-dk07.1-c1180 - qcom,ipq4019-ap-dk07.1-c1
168 - qcom,ipq4019-ap-dk07.1-c2181 - qcom,ipq4019-ap-dk07.1-c2
@@ -206,6 +219,11 @@ properties: · 37 unmodified lines
206 - qcom,sdx55-t55219 - qcom,sdx55-t55
207 - const: qcom,sdx55220 - const: qcom,sdx55
208 221
222 - items:
223 - enum:
224 - qcom,sdx65-mtp
225 - const: qcom,sdx65
226
209 - items:227 - items:
210 - enum:228 - enum:
211 - qcom,ipq6018-cp01229 - qcom,ipq6018-cp01
@@ -217,6 +235,11 @@ properties: · 5 unmodified lines
217 - qcom,sa8155p-adp235 - qcom,sa8155p-adp
218 - const: qcom,sa8155p236 - const: qcom,sa8155p
219 237
238 - items:
239 - enum:
240 - fairphone,fp4
241 - const: qcom,sm7225
242
220 - items:243 - items:
221 - enum:244 - enum:
222 - qcom,sm8150-mtp245 - qcom,sm8150-mtp
Documentation/devicetree/bindings/arm/renesas.yaml+61−0
@@ -255,12 +255,19 @@ properties: · 254 unmodified lines
255 - enum:255 - enum:
256 - renesas,h3ulcb256 - renesas,h3ulcb
257 - renesas,m3ulcb257 - renesas,m3ulcb
258 - renesas,m3nulcb
258 - enum:259 - enum:
260 - renesas,r8a779m0
259 - renesas,r8a779m1261 - renesas,r8a779m1
262 - renesas,r8a779m2
260 - renesas,r8a779m3263 - renesas,r8a779m3
264 - renesas,r8a779m4
265 - renesas,r8a779m5
266 - renesas,r8a779m8
261 - enum:267 - enum:
262 - renesas,r8a7795268 - renesas,r8a7795
263 - renesas,r8a77961269 - renesas,r8a77961
270 - renesas,r8a77965
264 271
265 - description: R-Car M3-N (R8A77965)272 - description: R-Car M3-N (R8A77965)
266 items:273 items:
@@ -308,6 +315,14 @@ properties: · 41 unmodified lines
308 - const: renesas,falcon-cpu315 - const: renesas,falcon-cpu
309 - const: renesas,r8a779a0316 - const: renesas,r8a779a0
310 317
318 - description: R-Car H3e (R8A779M0)
319 items:
320 - enum:
321 - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier)
322 - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
323 - const: renesas,r8a779m0
324 - const: renesas,r8a7795
325
311 - description: R-Car H3e-2G (R8A779M1)326 - description: R-Car H3e-2G (R8A779M1)
312 items:327 items:
313 - enum:328 - enum:
@@ -316,6 +331,14 @@ properties: · 2 unmodified lines
316 - const: renesas,r8a779m1331 - const: renesas,r8a779m1
317 - const: renesas,r8a7795332 - const: renesas,r8a7795
318 333
334 - description: R-Car M3e (R8A779M2)
335 items:
336 - enum:
337 - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro)
338 - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
339 - const: renesas,r8a779m2
340 - const: renesas,r8a77961
341
319 - description: R-Car M3e-2G (R8A779M3)342 - description: R-Car M3e-2G (R8A779M3)
320 items:343 items:
321 - enum:344 - enum:
@@ -324,6 +347,44 @@ properties: · 2 unmodified lines
324 - const: renesas,r8a779m3347 - const: renesas,r8a779m3
325 - const: renesas,r8a77961348 - const: renesas,r8a77961
326 349
350 - description: R-Car M3Ne (R8A779M4)
351 items:
352 - enum:
353 - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro)
354 - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
355 - const: renesas,r8a779m4
356 - const: renesas,r8a77965
357
358 - description: R-Car M3Ne-2G (R8A779M5)
359 items:
360 - enum:
361 - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro)
362 - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
363 - const: renesas,r8a779m5
364 - const: renesas,r8a77965
365
366 - description: R-Car E3e (R8A779M6)
367 items:
368 - enum:
369 - renesas,ebisu # Ebisu
370 - const: renesas,r8a779m6
371 - const: renesas,r8a77990
372
373 - description: R-Car D3e (R8A779M7)
374 items:
375 - enum:
376 - renesas,draak # Draak
377 - const: renesas,r8a779m7
378 - const: renesas,r8a77995
379
380 - description: R-Car H3Ne (R8A779M8)
381 items:
382 - enum:
383 - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier)
384 - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
385 - const: renesas,r8a779m8
386 - const: renesas,r8a7795
387
327 - description: RZ/N1D (R9A06G032)388 - description: RZ/N1D (R9A06G032)
328 items:389 items:
329 - enum:390 - enum:
Documentation/devicetree/bindings/arm/rockchip.yaml+47−1
@@ -115,6 +115,11 @@ properties: · 114 unmodified lines
115 - const: firefly,roc-rk3328-cc115 - const: firefly,roc-rk3328-cc
116 - const: rockchip,rk3328116 - const: rockchip,rk3328
117 117
118 - description: Firefly ROC-RK3328-PC
119 items:
120 - const: firefly,roc-rk3328-pc
121 - const: rockchip,rk3328
122
118 - description: Firefly ROC-RK3399-PC123 - description: Firefly ROC-RK3399-PC
119 items:124 items:
120 - enum:125 - enum:
@@ -122,6 +127,12 @@ properties: · 1 unmodified line
122 - firefly,roc-rk3399-pc-mezzanine127 - firefly,roc-rk3399-pc-mezzanine
123 - const: rockchip,rk3399128 - const: rockchip,rk3399
124 129
130 - description: Firefly ROC-RK3399-PC-PLUS
131 items:
132 - enum:
133 - firefly,roc-rk3399-pc-plus
134 - const: rockchip,rk3399
135
125 - description: FriendlyElec NanoPi R2S136 - description: FriendlyElec NanoPi R2S
126 items:137 items:
127 - const: friendlyarm,nanopi-r2s138 - const: friendlyarm,nanopi-r2s
@@ -287,6 +298,34 @@ properties: · 159 unmodified lines
287 - const: google,veyron298 - const: google,veyron
288 - const: rockchip,rk3288299 - const: rockchip,rk3288
289 300
301 - description: Google Scarlet - Dumo (ASUS Chromebook Tablet CT100)
302 items:
303 - const: google,scarlet-rev15-sku0
304 - const: google,scarlet-rev15
305 - const: google,scarlet-rev14-sku0
306 - const: google,scarlet-rev14
307 - const: google,scarlet-rev13-sku0
308 - const: google,scarlet-rev13
309 - const: google,scarlet-rev12-sku0
310 - const: google,scarlet-rev12
311 - const: google,scarlet-rev11-sku0
312 - const: google,scarlet-rev11
313 - const: google,scarlet-rev10-sku0
314 - const: google,scarlet-rev10
315 - const: google,scarlet-rev9-sku0
316 - const: google,scarlet-rev9
317 - const: google,scarlet-rev8-sku0
318 - const: google,scarlet-rev8
319 - const: google,scarlet-rev7-sku0
320 - const: google,scarlet-rev7
321 - const: google,scarlet-rev6-sku0
322 - const: google,scarlet-rev6
323 - const: google,scarlet-rev5-sku0
324 - const: google,scarlet-rev5
325 - const: google,scarlet
326 - const: google,gru
327 - const: rockchip,rk3399
328
290 - description: Google Scarlet - Kingdisplay (Acer Chromebook Tab 10)329 - description: Google Scarlet - Kingdisplay (Acer Chromebook Tab 10)
291 items:330 items:
292 - const: google,scarlet-rev15-sku7331 - const: google,scarlet-rev15-sku7
@@ -455,16 +494,23 @@ properties: · 162 unmodified lines
455 - const: pine64,rockpro64494 - const: pine64,rockpro64
456 - const: rockchip,rk3399495 - const: rockchip,rk3399
457 496
497 - description: Pine64 Quartz64 Model A
498 items:
499 - const: pine64,quartz64-a
500 - const: rockchip,rk3566
501
458 - description: Radxa Rock502 - description: Radxa Rock
459 items:503 items:
460 - const: radxa,rock504 - const: radxa,rock
461 - const: rockchip,rk3188505 - const: rockchip,rk3188
462 506
463 - description: Radxa ROCK Pi 4A/B/C507 - description: Radxa ROCK Pi 4A/A+/B/B+/C
464 items:508 items:
465 - enum:509 - enum:
466 - radxa,rockpi4a510 - radxa,rockpi4a
511 - radxa,rockpi4a-plus
467 - radxa,rockpi4b512 - radxa,rockpi4b
513 - radxa,rockpi4b-plus
468 - radxa,rockpi4c514 - radxa,rockpi4c
469 - const: radxa,rockpi4515 - const: radxa,rockpi4
470 - const: rockchip,rk3399516 - const: rockchip,rk3399
Documentation/devicetree/bindings/arm/rockchip/pmu.yaml+4−0
@@ -22,7 +22,9 @@ select: · 21 unmodified lines
22 - rockchip,px30-pmu22 - rockchip,px30-pmu
23 - rockchip,rk3066-pmu23 - rockchip,rk3066-pmu
24 - rockchip,rk3288-pmu24 - rockchip,rk3288-pmu
25 - rockchip,rk3368-pmu
25 - rockchip,rk3399-pmu26 - rockchip,rk3399-pmu
27 - rockchip,rk3568-pmu
26 28
27 required:29 required:
28 - compatible30 - compatible
@@ -34,7 +36,9 @@ properties: · 5 unmodified lines
34 - rockchip,px30-pmu36 - rockchip,px30-pmu
35 - rockchip,rk3066-pmu37 - rockchip,rk3066-pmu
36 - rockchip,rk3288-pmu38 - rockchip,rk3288-pmu
39 - rockchip,rk3368-pmu
37 - rockchip,rk3399-pmu40 - rockchip,rk3399-pmu
41 - rockchip,rk3568-pmu
38 - const: syscon42 - const: syscon
39 - const: simple-mfd43 - const: simple-mfd
40 44
Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml+6−0
@@ -199,6 +199,12 @@ properties: · 198 unmodified lines
199 - samsung,exynos7-espresso # Samsung Exynos7 Espresso199 - samsung,exynos7-espresso # Samsung Exynos7 Espresso
200 - const: samsung,exynos7200 - const: samsung,exynos7
201 201
202 - description: Exynos Auto v9 based boards
203 items:
204 - enum:
205 - samsung,exynosautov9-sadk # Samsung Exynos Auto v9 SADK
206 - const: samsung,exynosautov9
207
202required:208required:
203 - compatible209 - compatible
204 210
Documentation/devicetree/bindings/arm/sprd/sprd.yaml+5−0
@@ -30,6 +30,11 @@ properties: · 29 unmodified lines
30 - sprd,sp9863a-1h1030 - sprd,sp9863a-1h10
31 - const: sprd,sc9863a31 - const: sprd,sc9863a
32 32
33 - items:
34 - enum:
35 - sprd,ums512-1h10
36 - const: sprd,ums512
37
33additionalProperties: true38additionalProperties: true
34 39
35...40...
Documentation/devicetree/bindings/arm/stm32/stm32.yaml+4−0
@@ -55,6 +55,10 @@ properties: · 54 unmodified lines
55 - enum:55 - enum:
56 - st,stm32h750i-art-pi56 - st,stm32h750i-art-pi
57 - const: st,stm32h75057 - const: st,stm32h750
58 - items:
59 - enum:
60 - st,stm32mp135f-dk
61 - const: st,stm32mp135
58 - items:62 - items:
59 - enum:63 - enum:
60 - shiratech,stm32mp157a-iot-box # IoT Box64 - shiratech,stm32mp157a-iot-box # IoT Box
Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml+1−0
@@ -30,6 +30,7 @@ properties: · 29 unmodified lines
30 enum:30 enum:
31 - allwinner,sun5i-a13-mbus31 - allwinner,sun5i-a13-mbus
32 - allwinner,sun8i-h3-mbus32 - allwinner,sun8i-h3-mbus
33 - allwinner,sun8i-r40-mbus
33 - allwinner,sun50i-a64-mbus34 - allwinner,sun50i-a64-mbus
34 35
35 reg:36 reg:
Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml+38−0
@@ -0,0 +1,38 @@
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Allwinner CPU Configuration Controller Device Tree Bindings
8
9maintainers:
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
12
13properties:
14 compatible:
15 enum:
16 - allwinner,sun6i-a31-cpuconfig
17 - allwinner,sun8i-a23-cpuconfig
18 - allwinner,sun8i-a83t-cpucfg
19 - allwinner,sun8i-a83t-r-cpucfg
20 - allwinner,sun9i-a80-cpucfg
21
22 reg:
23 maxItems: 1
24
25required:
26 - compatible
27 - reg
28
29additionalProperties: false
30
31examples:
32 - |
33 cpucfg@1f01c00 {
34 compatible = "allwinner,sun6i-a31-cpuconfig";
35 reg = <0x01f01c00 0x300>;
36 };
37
38...
Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml+33−0
@@ -0,0 +1,33 @@
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun9i-a80-prcm.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Allwinner A80 PRCM Device Tree Bindings
8
9maintainers:
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
12
13properties:
14 compatible:
15 const: allwinner,sun9i-a80-prcm
16
17 reg:
18 maxItems: 1
19
20required:
21 - compatible
22 - reg
23
24additionalProperties: false
25
26examples:
27 - |
28 prcm@8001400 {
29 compatible = "allwinner,sun9i-a80-prcm";
30 reg = <0x08001400 0x200>;
31 };
32
33...
Documentation/devicetree/bindings/arm/ti/k3.yaml+13−2
@@ -24,16 +24,27 @@ properties: · 23 unmodified lines
24 - enum:24 - enum:
25 - ti,am654-evm25 - ti,am654-evm
26 - siemens,iot2050-basic26 - siemens,iot2050-basic
27 - siemens,iot2050-basic-pg2
27 - siemens,iot2050-advanced28 - siemens,iot2050-advanced
29 - siemens,iot2050-advanced-pg2
28 - const: ti,am65430 - const: ti,am654
29 31
30 - description: K3 J721E SoC32 - description: K3 J721E SoC
31 items:33 oneOf:
32 - const: ti,j721e34 - const: ti,j721e
35 - items:
36 - enum:
37 - ti,j721e-evm
38 - ti,j721e-sk
39 - const: ti,j721e
33 40
34 - description: K3 J7200 SoC41 - description: K3 J7200 SoC
35 items:42 oneOf:
36 - const: ti,j720043 - const: ti,j7200
44 - items:
45 - enum:
46 - ti,j7200-evm
47 - const: ti,j7200
37 48
38 - description: K3 AM642 SoC49 - description: K3 AM642 SoC
39 items:50 items:
Documentation/devicetree/bindings/arm/toshiba.yaml+1−0
@@ -18,6 +18,7 @@ properties: · 17 unmodified lines
18 items:18 items:
19 - enum:19 - enum:
20 - toshiba,tmpv7708-rm-mbrc # TMPV7708 RM main board20 - toshiba,tmpv7708-rm-mbrc # TMPV7708 RM main board
21 - toshiba,tmpv7708-visrobo-vrb # TMPV7708 VisROBO VRB board
21 - const: toshiba,tmpv770822 - const: toshiba,tmpv7708
22 23
23additionalProperties: true24additionalProperties: true
Documentation/devicetree/bindings/arm/xilinx.yaml+17−0
@@ -87,6 +87,7 @@ properties: · 86 unmodified lines
87 - xlnx,zynqmp-zcu102-revA87 - xlnx,zynqmp-zcu102-revA
88 - xlnx,zynqmp-zcu102-revB88 - xlnx,zynqmp-zcu102-revB
89 - xlnx,zynqmp-zcu102-rev1.089 - xlnx,zynqmp-zcu102-rev1.0
90 - xlnx,zynqmp-zcu102-rev1.1
90 - const: xlnx,zynqmp-zcu10291 - const: xlnx,zynqmp-zcu102
91 - const: xlnx,zynqmp92 - const: xlnx,zynqmp
92 93
@@ -115,6 +116,22 @@ properties: · 22 unmodified lines
115 - const: xlnx,zynqmp-zcu111116 - const: xlnx,zynqmp-zcu111
116 - const: xlnx,zynqmp117 - const: xlnx,zynqmp
117 118
119 - description: Xilinx Kria SOMs
120 items:
121 - const: xlnx,zynqmp-sm-k26-rev1
122 - const: xlnx,zynqmp-sm-k26-revB
123 - const: xlnx,zynqmp-sm-k26-revA
124 - const: xlnx,zynqmp-sm-k26
125 - const: xlnx,zynqmp
126
127 - description: Xilinx Kria SOMs (starter)
128 items:
129 - const: xlnx,zynqmp-smk-k26-rev1
130 - const: xlnx,zynqmp-smk-k26-revB
131 - const: xlnx,zynqmp-smk-k26-revA
132 - const: xlnx,zynqmp-smk-k26
133 - const: xlnx,zynqmp
134
118additionalProperties: true135additionalProperties: true
119 136
120...137...
Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml+3−0
@@ -47,6 +47,9 @@ properties: · 46 unmodified lines
47 interrupts:47 interrupts:
48 maxItems: 148 maxItems: 1
49 49
50 power-domains:
51 maxItems: 1
52
50required:53required:
51 - "#clock-cells"54 - "#clock-cells"
52 - compatible55 - compatible
Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml+3−0
@@ -51,6 +51,9 @@ properties: · 50 unmodified lines
51 dma-names:51 dma-names:
52 const: audio-rx52 const: audio-rx
53 53
54 power-domains:
55 maxItems: 1
56
54required:57required:
55 - compatible58 - compatible
56 - reg59 - reg
Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml+3−0
@@ -24,6 +24,9 @@ properties: · 23 unmodified lines
24 interrupts:24 interrupts:
25 maxItems: 125 maxItems: 1
26 26
27 power-domains:
28 maxItems: 1
29
27required:30required:
28 - compatible31 - compatible
29 - reg32 - reg
Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml+3−0
@@ -24,6 +24,9 @@ properties: · 23 unmodified lines
24 interrupts:24 interrupts:
25 maxItems: 125 maxItems: 1
26 26
27 power-domains:
28 maxItems: 1
29
27required:30required:
28 - compatible31 - compatible
29 - reg32 - reg
Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt+6−0
@@ -19,6 +19,11 @@ Required properties: · 18 unmodified lines
19 Documentation/devicetree/bindings/graph.txt. This port should be connected19 Documentation/devicetree/bindings/graph.txt. This port should be connected
20 to the input port of an attached DSI panel or DSI-to-eDP encoder chip.20 to the input port of an attached DSI panel or DSI-to-eDP encoder chip.
21 21
22Optional properties:
23- resets: list of phandle + reset specifier pair, as described in [1].
24
25[1] Documentation/devicetree/bindings/reset/reset.txt
26
22MIPI TX Configuration Module27MIPI TX Configuration Module
23============================28============================
24 29
@@ -45,6 +50,7 @@ dsi0: dsi@1401b000 { · 20 unmodified lines
45 clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>,50 clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>,
46 <&mipi_tx0>;51 <&mipi_tx0>;
47 clock-names = "engine", "digital", "hs";52 clock-names = "engine", "digital", "hs";
53 resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>;
48 phys = <&mipi_tx0>;54 phys = <&mipi_tx0>;
49 phy-names = "dphy";55 phy-names = "dphy";
50 56
Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml+106−0
@@ -0,0 +1,106 @@
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvdec.yaml#"
5$schema: "http://devicetree.org/meta-schemas/core.yaml#"
6
7title: Device tree binding for NVIDIA Tegra NVDEC
8
9description: |
10 NVDEC is the hardware video decoder present on NVIDIA Tegra210
11 and newer chips. It is located on the Host1x bus and typically
12 programmed through Host1x channels.
13
14maintainers:
15 - Thierry Reding <treding@gmail.com>
16 - Mikko Perttunen <mperttunen@nvidia.com>
17
18properties:
19 $nodename:
20 pattern: "^nvdec@[0-9a-f]*$"
21
22 compatible:
23 enum:
24 - nvidia,tegra210-nvdec
25 - nvidia,tegra186-nvdec
26 - nvidia,tegra194-nvdec
27
28 reg:
29 maxItems: 1
30
31 clocks:
32 maxItems: 1
33
34 clock-names:
35 items:
36 - const: nvdec
37
38 resets:
39 maxItems: 1
40
41 reset-names:
42 items:
43 - const: nvdec
44
45 power-domains:
46 maxItems: 1
47
48 iommus:
49 maxItems: 1
50
51 dma-coherent: true
52
53 interconnects:
54 items:
55 - description: DMA read memory client
56 - description: DMA read 2 memory client
57 - description: DMA write memory client
58
59 interconnect-names:
60 items:
61 - const: dma-mem
62 - const: read-1
63 - const: write
64
65 nvidia,host1x-class:
66 description: |
67 Host1x class of the engine, used to specify the targeted engine
68 when programming the engine through Host1x channels or when
69 configuring engine-specific behavior in Host1x.
70 default: 0xf0
71 $ref: /schemas/types.yaml#/definitions/uint32
72
73required:
74 - compatible
75 - reg
76 - clocks
77 - clock-names
78 - resets
79 - reset-names
80 - power-domains
81
82additionalProperties: false
83
84examples:
85 - |
86 #include <dt-bindings/clock/tegra186-clock.h>
87 #include <dt-bindings/interrupt-controller/arm-gic.h>
88 #include <dt-bindings/memory/tegra186-mc.h>
89 #include <dt-bindings/power/tegra186-powergate.h>
90 #include <dt-bindings/reset/tegra186-reset.h>
91
92 nvdec@15480000 {
93 compatible = "nvidia,tegra186-nvdec";
94 reg = <0x15480000 0x40000>;
95 clocks = <&bpmp TEGRA186_CLK_NVDEC>;
96 clock-names = "nvdec";
97 resets = <&bpmp TEGRA186_RESET_NVDEC>;
98 reset-names = "nvdec";
99
100 power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVDEC>;
101 interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD &emc>,
102 <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD1 &emc>,
103 <&mc TEGRA186_MEMORY_CLIENT_NVDECSWR &emc>;
104 interconnect-names = "dma-mem", "read-1", "write";
105 iommus = <&smmu TEGRA186_SID_NVDEC>;
106 };
Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt+0−157
@@ -1,157 +0,0 @@
1Device tree bindings for OMAP general purpose memory controllers (GPMC)
2
3The actual devices are instantiated from the child nodes of a GPMC node.
4
5Required properties:
6
7 - compatible: Should be set to one of the following:
8
9 ti,omap2420-gpmc (omap2420)
10 ti,omap2430-gpmc (omap2430)
11 ti,omap3430-gpmc (omap3430 & omap3630)
12 ti,omap4430-gpmc (omap4430 & omap4460 & omap543x)
13 ti,am3352-gpmc (am335x devices)
14
15 - reg: A resource specifier for the register space
16 (see the example below)
17 - ti,hwmods: Should be set to "ti,gpmc" until the DT transition is
18 completed.
19 - #address-cells: Must be set to 2 to allow memory address translation
20 - #size-cells: Must be set to 1 to allow CS address passing
21 - gpmc,num-cs: The maximum number of chip-select lines that controller
22 can support.
23 - gpmc,num-waitpins: The maximum number of wait pins that controller can
24 support.
25 - ranges: Must be set up to reflect the memory layout with four
26 integer values for each chip-select line in use:
27
28 <cs-number> 0 <physical address of mapping> <size>
29
30 Currently, calculated values derived from the contents
31 of the per-CS register GPMC_CONFIG7 (as set up by the
32 bootloader) are used for the physical address decoding.
33 As this will change in the future, filling correct
34 values here is a requirement.
35 - interrupt-controller: The GPMC driver implements and interrupt controller for
36 the NAND events "fifoevent" and "termcount" plus the
37 rising/falling edges on the GPMC_WAIT pins.
38 The interrupt number mapping is as follows
39 0 - NAND_fifoevent
40 1 - NAND_termcount
41 2 - GPMC_WAIT0 pin edge
42 3 - GPMC_WAIT1 pin edge, and so on.
43 - interrupt-cells: Must be set to 2
44 - gpio-controller: The GPMC driver implements a GPIO controller for the
45 GPMC WAIT pins that can be used as general purpose inputs.
46 0 maps to GPMC_WAIT0 pin.
47 - gpio-cells: Must be set to 2
48
49Required properties when using NAND prefetch dma:
50 - dmas GPMC NAND prefetch dma channel
51 - dma-names Must be set to "rxtx"
52
53Timing properties for child nodes. All are optional and default to 0.
54
55 - gpmc,sync-clk-ps: Minimum clock period for synchronous mode, in picoseconds
56
57 Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2:
58 - gpmc,cs-on-ns: Assertion time
59 - gpmc,cs-rd-off-ns: Read deassertion time
60 - gpmc,cs-wr-off-ns: Write deassertion time
61
62 ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3:
63 - gpmc,adv-on-ns: Assertion time
64 - gpmc,adv-rd-off-ns: Read deassertion time
65 - gpmc,adv-wr-off-ns: Write deassertion time
66 - gpmc,adv-aad-mux-on-ns: Assertion time for AAD
67 - gpmc,adv-aad-mux-rd-off-ns: Read deassertion time for AAD
68 - gpmc,adv-aad-mux-wr-off-ns: Write deassertion time for AAD
69
70 WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
71 - gpmc,we-on-ns Assertion time
72 - gpmc,we-off-ns: Deassertion time
73
74 OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
75 - gpmc,oe-on-ns: Assertion time
76 - gpmc,oe-off-ns: Deassertion time
77 - gpmc,oe-aad-mux-on-ns: Assertion time for AAD
78 - gpmc,oe-aad-mux-off-ns: Deassertion time for AAD
79
80 Access time and cycle time timings (in nanoseconds) corresponding to
81 GPMC_CONFIG5:
82 - gpmc,page-burst-access-ns: Multiple access word delay
83 - gpmc,access-ns: Start-cycle to first data valid delay
84 - gpmc,rd-cycle-ns: Total read cycle time
85 - gpmc,wr-cycle-ns: Total write cycle time
86 - gpmc,bus-turnaround-ns: Turn-around time between successive accesses
87 - gpmc,cycle2cycle-delay-ns: Delay between chip-select pulses
88 - gpmc,clk-activation-ns: GPMC clock activation time
89 - gpmc,wait-monitoring-ns: Start of wait monitoring with regard to valid
90 data
91
92Boolean timing parameters. If property is present parameter enabled and
93disabled if omitted:
94 - gpmc,adv-extra-delay: ADV signal is delayed by half GPMC clock
95 - gpmc,cs-extra-delay: CS signal is delayed by half GPMC clock
96 - gpmc,cycle2cycle-diffcsen: Add "cycle2cycle-delay" between successive
97 accesses to a different CS
98 - gpmc,cycle2cycle-samecsen: Add "cycle2cycle-delay" between successive
99 accesses to the same CS
100 - gpmc,oe-extra-delay: OE signal is delayed by half GPMC clock
101 - gpmc,we-extra-delay: WE signal is delayed by half GPMC clock
102 - gpmc,time-para-granularity: Multiply all access times by 2
103
104The following are only applicable to OMAP3+ and AM335x:
105 - gpmc,wr-access-ns: In synchronous write mode, for single or
106 burst accesses, defines the number of
107 GPMC_FCLK cycles from start access time
108 to the GPMC_CLK rising edge used by the
109 memory device for the first data capture.
110 - gpmc,wr-data-mux-bus-ns: In address-data multiplex mode, specifies
111 the time when the first data is driven on
112 the address-data bus.
113
114GPMC chip-select settings properties for child nodes. All are optional.
115
116- gpmc,burst-length Page/burst length. Must be 4, 8 or 16.
117- gpmc,burst-wrap Enables wrap bursting
118- gpmc,burst-read Enables read page/burst mode
119- gpmc,burst-write Enables write page/burst mode
120- gpmc,device-width Total width of device(s) connected to a GPMC
121 chip-select in bytes. The GPMC supports 8-bit
122 and 16-bit devices and so this property must be
123 1 or 2.
124- gpmc,mux-add-data Address and data multiplexing configuration.
125 Valid values are 1 for address-address-data
126 multiplexing mode and 2 for address-data
127 multiplexing mode.
128- gpmc,sync-read Enables synchronous read. Defaults to asynchronous
129 is this is not set.
130- gpmc,sync-write Enables synchronous writes. Defaults to asynchronous
131 is this is not set.
132- gpmc,wait-pin Wait-pin used by client. Must be less than
133 "gpmc,num-waitpins".
134- gpmc,wait-on-read Enables wait monitoring on reads.
135- gpmc,wait-on-write Enables wait monitoring on writes.
136
137Example for an AM33xx board:
138
139 gpmc: gpmc@50000000 {
140 compatible = "ti,am3352-gpmc";
141 ti,hwmods = "gpmc";
142 reg = <0x50000000 0x2000>;
143 interrupts = <100>;
144 dmas = <&edma 52 0>;
145 dma-names = "rxtx";
146 gpmc,num-cs = <8>;
147 gpmc,num-waitpins = <2>;
148 #address-cells = <2>;
149 #size-cells = <1>;
150 ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */
151 interrupt-controller;
152 #interrupt-cells = <2>;
153 gpio-controller;
154 #gpio-cells = <2>;
155
156 /* child nodes go here */
157 };
Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml+245−0
@@ -0,0 +1,245 @@
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: device tree bindings for children of the Texas Instruments GPMC
8
9maintainers:
10 - Tony Lindgren <tony@atomide.com>
11 - Roger Quadros <rogerq@kernel.org>
12
13description:
14 This binding is meant for the child nodes of the GPMC node. The node
15 represents any device connected to the GPMC bus. It may be a Flash chip,
16 RAM chip or Ethernet controller, etc. These properties are meant for
17 configuring the GPMC settings/timings and will accompany the bindings
18 supported by the respective device.
19
20properties:
21 reg: true
22
23# GPMC Timing properties for child nodes. All are optional and default to 0.
24 gpmc,sync-clk-ps:
25 description: Minimum clock period for synchronous mode
26 default: 0
27
28# Chip-select signal timings corresponding to GPMC_CONFIG2:
29 gpmc,cs-on-ns:
30 description: Assertion time
31 default: 0
32
33 gpmc,cs-rd-off-ns:
34 description: Read deassertion time
35 default: 0
36
37 gpmc,cs-wr-off-ns:
38 description: Write deassertion time
39 default: 0
40
41# ADV signal timings corresponding to GPMC_CONFIG3:
42 gpmc,adv-on-ns:
43 description: Assertion time
44 default: 0
45
46 gpmc,adv-rd-off-ns:
47 description: Read deassertion time
48 default: 0
49
50 gpmc,adv-wr-off-ns:
51 description: Write deassertion time
52 default: 0
53
54 gpmc,adv-aad-mux-on-ns:
55 description: Assertion time for AAD
56 default: 0
57
58 gpmc,adv-aad-mux-rd-off-ns:
59 description: Read deassertion time for AAD
60 default: 0
61
62 gpmc,adv-aad-mux-wr-off-ns:
63 description: Write deassertion time for AAD
64 default: 0
65
66# WE signals timings corresponding to GPMC_CONFIG4:
67 gpmc,we-on-ns:
68 description: Assertion time
69 default: 0
70
71 gpmc,we-off-ns:
72 description: Deassertion time
73 default: 0
74
75# OE signals timings corresponding to GPMC_CONFIG4:
76 gpmc,oe-on-ns:
77 description: Assertion time
78 default: 0
79
80 gpmc,oe-off-ns:
81 description: Deassertion time
82 default: 0
83
84 gpmc,oe-aad-mux-on-ns:
85 description: Assertion time for AAD
86 default: 0
87
88 gpmc,oe-aad-mux-off-ns:
89 description: Deassertion time for AAD
90 default: 0
91
92# Access time and cycle time timings (in nanoseconds) corresponding to
93# GPMC_CONFIG5:
94 gpmc,page-burst-access-ns:
95 description: Multiple access word delay
96 default: 0
97
98 gpmc,access-ns:
99 description: Start-cycle to first data valid delay
100 default: 0
101
102 gpmc,rd-cycle-ns:
103 description: Total read cycle time
104 default: 0
105
106 gpmc,wr-cycle-ns:
107 description: Total write cycle time
108 default: 0
109
110 gpmc,bus-turnaround-ns:
111 description: Turn-around time between successive accesses
112 default: 0
113
114 gpmc,cycle2cycle-delay-ns:
115 description: Delay between chip-select pulses
116 default: 0
117
118 gpmc,clk-activation-ns:
119 description: GPMC clock activation time
120 default: 0
121
122 gpmc,wait-monitoring-ns:
123 description: Start of wait monitoring with regard to valid data
124 default: 0
125
126# Boolean timing parameters. If property is present, parameter is enabled
127# otherwise disabled.
128 gpmc,adv-extra-delay:
129 description: ADV signal is delayed by half GPMC clock
130 type: boolean
131
132 gpmc,cs-extra-delay:
133 description: CS signal is delayed by half GPMC clock
134 type: boolean
135
136 gpmc,cycle2cycle-diffcsen:
137 description: |
138 Add "cycle2cycle-delay" between successive accesses
139 to a different CS
140 type: boolean
141
142 gpmc,cycle2cycle-samecsen:
143 description: |
144 Add "cycle2cycle-delay" between successive accesses
145 to the same CS
146 type: boolean
147
148 gpmc,oe-extra-delay:
149 description: OE signal is delayed by half GPMC clock
150 type: boolean
151
152 gpmc,we-extra-delay:
153 description: WE signal is delayed by half GPMC clock
154 type: boolean
155
156 gpmc,time-para-granularity:
157 description: Multiply all access times by 2
158 type: boolean
159
160# The following two properties are applicable only to OMAP3+ and AM335x:
161 gpmc,wr-access-ns:
162 description: |
163 In synchronous write mode, for single or
164 burst accesses, defines the number of
165 GPMC_FCLK cycles from start access time
166 to the GPMC_CLK rising edge used by the
167 memory device for the first data capture.
168 default: 0
169
170 gpmc,wr-data-mux-bus-ns:
171 description: |
172 In address-data multiplex mode, specifies
173 the time when the first data is driven on
174 the address-data bus.
175 default: 0
176
177# GPMC chip-select settings properties for child nodes. All are optional.
178 gpmc,burst-length:
179 description: Page/burst length.
180 $ref: /schemas/types.yaml#/definitions/uint32
181 enum: [0, 4, 8, 16]
182 default: 0
183
184 gpmc,burst-wrap:
185 description: Enables wrap bursting
186 type: boolean
187
188 gpmc,burst-read:
189 description: Enables read page/burst mode
190 type: boolean
191
192 gpmc,burst-write:
193 description: Enables write page/burst mode
194 type: boolean
195
196 gpmc,device-width:
197 description: |
198 Total width of device(s) connected to a GPMC
199 chip-select in bytes. The GPMC supports 8-bit
200 and 16-bit devices and so this property must be
201 1 or 2.
202 $ref: /schemas/types.yaml#/definitions/uint32
203 enum: [1, 2]
204 default: 1
205
206 gpmc,mux-add-data:
207 description: |
208 Address and data multiplexing configuration.
209 Valid values are
210 0 for Non multiplexed mode
211 1 for address-address-data multiplexing mode and
212 2 for address-data multiplexing mode.
213 $ref: /schemas/types.yaml#/definitions/uint32
214 enum: [0, 1, 2]
215
216 gpmc,sync-read:
217 description: |
218 Enables synchronous read. Defaults to asynchronous
219 is this is not set.
220 type: boolean
221
222 gpmc,sync-write:
223 description: |
224 Enables synchronous writes. Defaults to asynchronous
225 is this is not set.
226 type: boolean
227
228 gpmc,wait-pin:
229 description: |
230 Wait-pin used by client. Must be less than "gpmc,num-waitpins".
231 $ref: /schemas/types.yaml#/definitions/uint32
232
233 gpmc,wait-on-read:
234 description: Enables wait monitoring on reads.
235 type: boolean
236
237 gpmc,wait-on-write:
238 description: Enables wait monitoring on writes.
239 type: boolean
240
241required:
242 - reg
243
244# the GPMC child will have its own native properties
245additionalProperties: true
Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml+172−0
@@ -0,0 +1,172 @@
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Texas Instruments GPMC Memory Controller device-tree bindings
8
9maintainers:
10 - Tony Lindgren <tony@atomide.com>
11 - Roger Quadros <rogerq@kernel.org>
12
13description:
14 The GPMC is a unified memory controller dedicated for interfacing
15 with external memory devices like
16 - Asynchronous SRAM-like memories and ASICs
17 - Asynchronous, synchronous, and page mode burst NOR flash
18 - NAND flash
19 - Pseudo-SRAM devices
20
21properties:
22 compatible:
23 items:
24 - enum:
25 - ti,am3352-gpmc
26 - ti,omap2420-gpmc
27 - ti,omap2430-gpmc
28 - ti,omap3430-gpmc
29 - ti,omap4430-gpmc
30
31 reg:
32 maxItems: 1
33
34 interrupts:
35 maxItems: 1
36
37 clocks:
38 maxItems: 1
39 description: |
40 Functional clock. Used for bus timing calculations and
41 GPMC configuration.
42
43 clock-names:
44 items:
45 - const: fck
46
47 dmas:
48 items:
49 - description: DMA channel for GPMC NAND prefetch
50
51 dma-names:
52 items:
53 - const: rxtx
54
55 "#address-cells": true
56
57 "#size-cells": true
58
59 gpmc,num-cs:
60 description: maximum number of supported chip-select lines.
61 $ref: /schemas/types.yaml#/definitions/uint32
62
63 gpmc,num-waitpins:
64 description: maximum number of supported wait pins.
65 $ref: /schemas/types.yaml#/definitions/uint32
66
67 ranges:
68 minItems: 1
69 description: |
70 Must be set up to reflect the memory layout with four
71 integer values for each chip-select line in use,
72 <cs-number> 0 <physical address of mapping> <size>
73 items:
74 - description: NAND bank 0
75 - description: NOR/SRAM bank 0
76 - description: NOR/SRAM bank 1
77
78 '#interrupt-cells':
79 const: 2
80
81 interrupt-controller:
82 description: |
83 The GPMC driver implements and interrupt controller for
84 the NAND events "fifoevent" and "termcount" plus the
85 rising/falling edges on the GPMC_WAIT pins.
86 The interrupt number mapping is as follows
87 0 - NAND_fifoevent
88 1 - NAND_termcount
89 2 - GPMC_WAIT0 pin edge
90 3 - GPMC_WAIT1 pin edge, and so on.
91
92 '#gpio-cells':
93 const: 2
94
95 gpio-controller:
96 description: |
97 The GPMC driver implements a GPIO controller for the
98 GPMC WAIT pins that can be used as general purpose inputs.
99 0 maps to GPMC_WAIT0 pin.
100
101 ti,hwmods:
102 description:
103 Name of the HWMOD associated with GPMC. This is for legacy
104 omap2/3 platforms only.
105 $ref: /schemas/types.yaml#/definitions/string
106 deprecated: true
107
108 ti,no-idle-on-init:
109 description:
110 Prevent idling the module at init. This is for legacy omap2/3
111 platforms only.
112 type: boolean
113 deprecated: true
114
115patternProperties:
116 "@[0-7],[a-f0-9]+$":
117 type: object
118 description: |
119 The child device node represents the device connected to the GPMC
120 bus. The device can be a NAND chip, SRAM device, NOR device
121 or an ASIC.
122
123 allOf:
124 - $ref: "ti,gpmc-child.yaml"
125
126 unevaluatedProperties: false
127
128required:
129 - compatible
130 - reg
131 - gpmc,num-cs
132 - gpmc,num-waitpins
133 - "#address-cells"
134 - "#size-cells"
135
136additionalProperties: false
137
138examples:
139 - |
140 #include <dt-bindings/interrupt-controller/arm-gic.h>
141 #include <dt-bindings/gpio/gpio.h>
142
143 gpmc: memory-controller@50000000 {
144 compatible = "ti,am3352-gpmc";
145 reg = <0x50000000 0x2000>;
146 interrupts = <100>;
147 clocks = <&l3s_clkctrl>;
148 clock-names = "fck";
149 dmas = <&edma 52 0>;
150 dma-names = "rxtx";
151 gpmc,num-cs = <8>;
152 gpmc,num-waitpins = <2>;
153 #address-cells = <2>;
154 #size-cells = <1>;
155 ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */
156 interrupt-controller;
157 #interrupt-cells = <2>;
158 gpio-controller;
159 #gpio-cells = <2>;
160
161 nand@0,0 {
162 compatible = "ti,omap2-nand";
163 reg = <0 0 4>;
164 interrupt-parent = <&gpmc>;
165 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
166 <1 IRQ_TYPE_NONE>; /* termcount */
167 ti,nand-xfer-type = "prefetch-dma";
168 ti,nand-ecc-opt = "bch16";
169 ti,elm-id = <&elm>;
170 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
171 };
172 };
Documentation/devicetree/bindings/mtd/gpmc-nand.txt+0−147
@@ -1,147 +0,0 @@
1Device tree bindings for GPMC connected NANDs
2
3GPMC connected NAND (found on OMAP boards) are represented as child nodes of
4the GPMC controller with a name of "nand".
5
6All timing relevant properties as well as generic gpmc child properties are
7explained in a separate documents - please refer to
8Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
9
10For NAND specific properties such as ECC modes or bus width, please refer to
11Documentation/devicetree/bindings/mtd/nand-controller.yaml
12
13
14Required properties:
15
16 - compatible: "ti,omap2-nand"
17 - reg: range id (CS number), base offset and length of the
18 NAND I/O space
19 - interrupts: Two interrupt specifiers, one for fifoevent, one for termcount.
20
21Optional properties:
22
23 - nand-bus-width: Set this numeric value to 16 if the hardware
24 is wired that way. If not specified, a bus
25 width of 8 is assumed.
26
27 - ti,nand-ecc-opt: A string setting the ECC layout to use. One of:
28 "sw" 1-bit Hamming ecc code via software
29 "hw" <deprecated> use "ham1" instead
30 "hw-romcode" <deprecated> use "ham1" instead
31 "ham1" 1-bit Hamming ecc code
32 "bch4" 4-bit BCH ecc code
33 "bch8" 8-bit BCH ecc code
34 "bch16" 16-bit BCH ECC code
35 Refer below "How to select correct ECC scheme for your device ?"
36
37 - ti,nand-xfer-type: A string setting the data transfer type. One of:
38
39 "prefetch-polled" Prefetch polled mode (default)
40 "polled" Polled mode, without prefetch
41 "prefetch-dma" Prefetch enabled DMA mode
42 "prefetch-irq" Prefetch enabled irq mode
43
44 - elm_id: <deprecated> use "ti,elm-id" instead
45 - ti,elm-id: Specifies phandle of the ELM devicetree node.
46 ELM is an on-chip hardware engine on TI SoC which is used for
47 locating ECC errors for BCHx algorithms. SoC devices which have
48 ELM hardware engines should specify this device node in .dtsi
49 Using ELM for ECC error correction frees some CPU cycles.
50 - rb-gpios: GPIO specifier for the ready/busy# pin.
51
52For inline partition table parsing (optional):
53
54 - #address-cells: should be set to 1
55 - #size-cells: should be set to 1
56
57Example for an AM33xx board:
58
59 gpmc: gpmc@50000000 {
60 compatible = "ti,am3352-gpmc";
61 ti,hwmods = "gpmc";
62 reg = <0x50000000 0x36c>;
63 interrupts = <100>;
64 gpmc,num-cs = <8>;
65 gpmc,num-waitpins = <2>;
66 #address-cells = <2>;
67 #size-cells = <1>;
68 ranges = <0 0 0x08000000 0x1000000>; /* CS0 space, 16MB */
69 elm_id = <&elm>;
70 interrupt-controller;
71 #interrupt-cells = <2>;
72
73 nand@0,0 {
74 compatible = "ti,omap2-nand";
75 reg = <0 0 4>; /* CS0, offset 0, NAND I/O window 4 */
76 interrupt-parent = <&gpmc>;
77 interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE NONE>;
78 nand-bus-width = <16>;
79 ti,nand-ecc-opt = "bch8";
80 ti,nand-xfer-type = "polled";
81 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
82
83 gpmc,sync-clk-ps = <0>;
84 gpmc,cs-on-ns = <0>;
85 gpmc,cs-rd-off-ns = <44>;
86 gpmc,cs-wr-off-ns = <44>;
87 gpmc,adv-on-ns = <6>;
88 gpmc,adv-rd-off-ns = <34>;
89 gpmc,adv-wr-off-ns = <44>;
90 gpmc,we-off-ns = <40>;
91 gpmc,oe-off-ns = <54>;
92 gpmc,access-ns = <64>;
93 gpmc,rd-cycle-ns = <82>;
94 gpmc,wr-cycle-ns = <82>;
95 gpmc,wr-access-ns = <40>;
96 gpmc,wr-data-mux-bus-ns = <0>;
97
98 #address-cells = <1>;
99 #size-cells = <1>;
100
101 /* partitions go here */
102 };
103 };
104
105How to select correct ECC scheme for your device ?
106--------------------------------------------------
107Higher ECC scheme usually means better protection against bit-flips and
108increased system lifetime. However, selection of ECC scheme is dependent
109on various other factors also like;
110
111(1) support of built in hardware engines.
112 Some legacy OMAP SoC do not have ELM harware engine, so those SoC cannot
113 support ecc-schemes with hardware error-correction (BCHx_HW). However
114 such SoC can use ecc-schemes with software library for error-correction
115 (BCHx_HW_DETECTION_SW). The error correction capability with software
116 library remains equivalent to their hardware counter-part, but there is
117 slight CPU penalty when too many bit-flips are detected during reads.
118
119(2) Device parameters like OOBSIZE.
120 Other factor which governs the selection of ecc-scheme is oob-size.
121 Higher ECC schemes require more OOB/Spare area to store ECC syndrome,
122 so the device should have enough free bytes available its OOB/Spare
123 area to accommodate ECC for entire page. In general following expression
124 helps in determining if given device can accommodate ECC syndrome:
125 "2 + (PAGESIZE / 512) * ECC_BYTES" <= OOBSIZE"
126 where
127 OOBSIZE number of bytes in OOB/spare area
128 PAGESIZE number of bytes in main-area of device page
129 ECC_BYTES number of ECC bytes generated to protect
130 512 bytes of data, which is:
131 '3' for HAM1_xx ecc schemes
132 '7' for BCH4_xx ecc schemes
133 '14' for BCH8_xx ecc schemes
134 '26' for BCH16_xx ecc schemes
135
136 Example(a): For a device with PAGESIZE = 2048 and OOBSIZE = 64 and
137 trying to use BCH16 (ECC_BYTES=26) ecc-scheme.
138 Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B
139 which is greater than capacity of NAND device (OOBSIZE=64)
140 Hence, BCH16 cannot be supported on given device. But it can
141 probably use lower ecc-schemes like BCH8.
142
143 Example(b): For a device with PAGESIZE = 2048 and OOBSIZE = 128 and
144 trying to use BCH16 (ECC_BYTES=26) ecc-scheme.
145 Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B
146 which can be accommodated in the OOB/Spare area of this device
147 (OOBSIZE=128). So this device can use BCH16 ecc-scheme.
Documentation/devicetree/bindings/mtd/gpmc-nor.txt+0−98
@@ -1,98 +0,0 @@
1Device tree bindings for NOR flash connect to TI GPMC
2
3NOR flash connected to the TI GPMC (found on OMAP boards) are represented as
4child nodes of the GPMC controller with a name of "nor".
5
6All timing relevant properties as well as generic GPMC child properties are
7explained in a separate documents. Please refer to
8Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
9
10Required properties:
11- bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and
12 16-bit devices and so must be either 1 or 2 bytes.
13- compatible: Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
14- gpmc,cs-on-ns: Chip-select assertion time
15- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads
16- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes
17- gpmc,oe-on-ns: Output-enable assertion time
18- gpmc,oe-off-ns: Output-enable de-assertion time
19- gpmc,we-on-ns Write-enable assertion time
20- gpmc,we-off-ns: Write-enable de-assertion time
21- gpmc,access-ns: Start cycle to first data capture (read access)
22- gpmc,rd-cycle-ns: Total read cycle time
23- gpmc,wr-cycle-ns: Total write cycle time
24- linux,mtd-name: Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
25- reg: Chip-select, base address (relative to chip-select)
26 and size of NOR flash. Note that base address will be
27 typically 0 as this is the start of the chip-select.
28
29Optional properties:
30- gpmc,XXX Additional GPMC timings and settings parameters. See
31 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
32
33Optional properties for partition table parsing:
34- #address-cells: should be set to 1
35- #size-cells: should be set to 1
36
37Example:
38
39gpmc: gpmc@6e000000 {
40 compatible = "ti,omap3430-gpmc", "simple-bus";
41 ti,hwmods = "gpmc";
42 reg = <0x6e000000 0x1000>;
43 interrupts = <20>;
44 gpmc,num-cs = <8>;
45 gpmc,num-waitpins = <4>;
46 #address-cells = <2>;
47 #size-cells = <1>;
48
49 ranges = <0 0 0x10000000 0x08000000>;
50
51 nor@0,0 {
52 compatible = "cfi-flash";
53 linux,mtd-name= "intel,pf48f6000m0y1be";
54 #address-cells = <1>;
55 #size-cells = <1>;
56 reg = <0 0 0x08000000>;
57 bank-width = <2>;
58
59 gpmc,mux-add-data;
60 gpmc,cs-on-ns = <0>;
61 gpmc,cs-rd-off-ns = <186>;
62 gpmc,cs-wr-off-ns = <186>;
63 gpmc,adv-on-ns = <12>;
64 gpmc,adv-rd-off-ns = <48>;
65 gpmc,adv-wr-off-ns = <48>;
66 gpmc,oe-on-ns = <54>;
67 gpmc,oe-off-ns = <168>;
68 gpmc,we-on-ns = <54>;
69 gpmc,we-off-ns = <168>;
70 gpmc,rd-cycle-ns = <186>;
71 gpmc,wr-cycle-ns = <186>;
72 gpmc,access-ns = <114>;
73 gpmc,page-burst-access-ns = <6>;
74 gpmc,bus-turnaround-ns = <12>;
75 gpmc,cycle2cycle-delay-ns = <18>;
76 gpmc,wr-data-mux-bus-ns = <90>;
77 gpmc,wr-access-ns = <186>;
78 gpmc,cycle2cycle-samecsen;
79 gpmc,cycle2cycle-diffcsen;
80
81 partition@0 {
82 label = "bootloader-nor";
83 reg = <0 0x40000>;
84 };
85 partition@40000 {
86 label = "params-nor";
87 reg = <0x40000 0x40000>;
88 };
89 partition@80000 {
90 label = "kernel-nor";
91 reg = <0x80000 0x200000>;
92 };
93 partition@280000 {
94 label = "filesystem-nor";
95 reg = <0x240000 0x7d80000>;
96 };
97 };
98};
Documentation/devicetree/bindings/mtd/gpmc-onenand.txt+0−48
@@ -1,48 +0,0 @@
1Device tree bindings for GPMC connected OneNANDs
2
3GPMC connected OneNAND (found on OMAP boards) are represented as child nodes of
4the GPMC controller with a name of "onenand".
5
6All timing relevant properties as well as generic gpmc child properties are
7explained in a separate documents - please refer to
8Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
9
10Required properties:
11
12 - compatible: "ti,omap2-onenand"
13 - reg: The CS line the peripheral is connected to
14 - gpmc,device-width: Width of the ONENAND device connected to the GPMC
15 in bytes. Must be 1 or 2.
16
17Optional properties:
18
19 - int-gpios: GPIO specifier for the INT pin.
20
21For inline partition table parsing (optional):
22
23 - #address-cells: should be set to 1
24 - #size-cells: should be set to 1
25
26Example for an OMAP3430 board:
27
28 gpmc: gpmc@6e000000 {
29 compatible = "ti,omap3430-gpmc";
30 ti,hwmods = "gpmc";
31 reg = <0x6e000000 0x1000000>;
32 interrupts = <20>;
33 gpmc,num-cs = <8>;
34 gpmc,num-waitpins = <4>;
35 #address-cells = <2>;
36 #size-cells = <1>;
37
38 onenand@0 {
39 compatible = "ti,omap2-onenand";
40 reg = <0 0 0>; /* CS0, offset 0 */
41 gpmc,device-width = <2>;
42
43 #address-cells = <1>;
44 #size-cells = <1>;
45
46 /* partitions go here */
47 };
48 };
Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml+121−0
@@ -0,0 +1,121 @@
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mtd/ti,gpmc-nand.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Texas Instruments GPMC NAND Flash controller.
8
9maintainers:
10 - Tony Lindgren <tony@atomide.com>
11 - Roger Quadros <rogerq@kernel.org>
12
13description:
14 GPMC NAND controller/Flash is represented as a child of the
15 GPMC controller node.
16
17properties:
18 compatible:
19 const: ti,omap2-nand
20
21 reg:
22 maxItems: 1
23
24 interrupts:
25 items:
26 - description: Interrupt for fifoevent
27 - description: Interrupt for termcount
28
29 "#address-cells": true
30
31 "#size-cells": true
32
33 ti,nand-ecc-opt:
34 description: Desired ECC algorithm
35 $ref: /schemas/types.yaml#/definitions/string
36 enum: [sw, ham1, bch4, bch8, bch16]
37
38 ti,nand-xfer-type:
39 description: Data transfer method between controller and chip.
40 $ref: /schemas/types.yaml#/definitions/string
41 enum: [prefetch-polled, polled, prefetch-dma, prefetch-irq]
42 default: prefetch-polled
43
44 ti,elm-id:
45 description:
46 phandle to the ELM (Error Location Module).
47 $ref: /schemas/types.yaml#/definitions/phandle
48
49 nand-bus-width:
50 description:
51 Bus width to the NAND chip
52 $ref: /schemas/types.yaml#/definitions/uint32
53 enum: [8, 16]
54 default: 8
55
56patternProperties:
57 "@[0-9a-f]+$":
58 $ref: "/schemas/mtd/partitions/partition.yaml"
59
60allOf:
61 - $ref: "/schemas/memory-controllers/ti,gpmc-child.yaml"
62
63required:
64 - compatible
65 - reg
66 - ti,nand-ecc-opt
67
68unevaluatedProperties: false
69
70examples:
71 - |
72 #include <dt-bindings/interrupt-controller/arm-gic.h>
73 #include <dt-bindings/gpio/gpio.h>
74
75 gpmc: memory-controller@50000000 {
76 compatible = "ti,am3352-gpmc";
77 dmas = <&edma 52 0>;
78 dma-names = "rxtx";
79 clocks = <&l3s_gclk>;
80 clock-names = "fck";
81 reg = <0x50000000 0x2000>;
82 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
83 gpmc,num-cs = <7>;
84 gpmc,num-waitpins = <2>;
85 #address-cells = <2>;
86 #size-cells = <1>;
87 interrupt-controller;
88 #interrupt-cells = <2>;
89 gpio-controller;
90 #gpio-cells = <2>;
91
92 ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */
93 nand@0,0 {
94 compatible = "ti,omap2-nand";
95 reg = <0 0 4>; /* device IO registers */
96 interrupt-parent = <&gpmc>;
97 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
98 <1 IRQ_TYPE_NONE>; /* termcount */
99 ti,nand-xfer-type = "prefetch-dma";
100 ti,nand-ecc-opt = "bch16";
101 ti,elm-id = <&elm>;
102 #address-cells = <1>;
103 #size-cells = <1>;
104
105 /* NAND generic properties */
106 nand-bus-width = <8>;
107 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
108
109 /* GPMC properties*/
110 gpmc,device-width = <1>;
111
112 partition@0 {
113 label = "NAND.SPL";
114 reg = <0x00000000 0x00040000>;
115 };
116 partition@1 {
117 label = "NAND.SPL.backup1";
118 reg = <0x00040000 0x00040000>;
119 };
120 };
121 };
Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml+81−0
@@ -0,0 +1,81 @@
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mtd/ti,gpmc-onenand.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: OneNAND over Texas Instruments GPMC bus.
8
9maintainers:
10 - Tony Lindgren <tony@atomide.com>
11 - Roger Quadros <rogerq@kernel.org>
12
13description:
14 GPMC connected OneNAND (found on OMAP boards) are represented
15 as child nodes of the GPMC controller.
16
17properties:
18 compatible:
19 const: ti,omap2-onenand
20
21 reg:
22 items:
23 - description: |
24 Chip Select number, register offset and size of
25 OneNAND register window.
26
27 "#address-cells": true
28
29 "#size-cells": true
30
31 int-gpios:
32 description: GPIO specifier for the INT pin.
33
34patternProperties:
35 "@[0-9a-f]+$":
36 $ref: "/schemas/mtd/partitions/partition.yaml"
37
38allOf:
39 - $ref: "/schemas/memory-controllers/ti,gpmc-child.yaml"
40
41required:
42 - compatible
43 - reg
44 - "#address-cells"
45 - "#size-cells"
46
47unevaluatedProperties: false
48
49examples:
50 - |
51 gpmc: memory-controller@6e000000 {
52 compatible = "ti,omap3430-gpmc";
53 reg = <0x6e000000 0x02d0>;
54 interrupts = <20>;
55 gpmc,num-cs = <8>;
56 gpmc,num-waitpins = <4>;
57 clocks = <&l3s_clkctrl>;
58 clock-names = "fck";
59 #address-cells = <2>;
60 #size-cells = <1>;
61
62 ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */
63 <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */
64
65 onenand@0,0 {
66 compatible = "ti,omap2-onenand";
67 reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
68 #address-cells = <1>;
69 #size-cells = <1>;
70
71 partition@0 {
72 label = "bootloader";
73 reg = <0x00000000 0x00100000>;
74 };
75
76 partition@100000 {
77 label = "config";
78 reg = <0x00100000 0x002c0000>;
79 };
80 };
81 };
Documentation/devicetree/bindings/net/gpmc-eth.txt+0−97
@@ -1,97 +0,0 @@
1Device tree bindings for Ethernet chip connected to TI GPMC
2
3Besides being used to interface with external memory devices, the
4General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices
5such as ethernet controllers to processors using the TI GPMC as a data bus.
6
7Ethernet controllers connected to TI GPMC are represented as child nodes of
8the GPMC controller with an "ethernet" name.
9
10All timing relevant properties as well as generic GPMC child properties are
11explained in a separate documents. Please refer to
12Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
13
14For the properties relevant to the ethernet controller connected to the GPMC
15refer to the binding documentation of the device. For example, the documentation
16for the SMSC 911x is Documentation/devicetree/bindings/net/smsc,lan9115.yaml
17
18Child nodes need to specify the GPMC bus address width using the "bank-width"
19property but is possible that an ethernet controller also has a property to
20specify the I/O registers address width. Even when the GPMC has a maximum 16-bit
21address width, it supports devices with 32-bit word registers.
22For example with an SMSC LAN911x/912x controller connected to the TI GPMC on an
23OMAP2+ board, "bank-width = <2>;" and "reg-io-width = <4>;".
24
25Required properties:
26- bank-width: Address width of the device in bytes. GPMC supports 8-bit
27 and 16-bit devices and so must be either 1 or 2 bytes.
28- compatible: Compatible string property for the ethernet child device.
29- gpmc,cs-on-ns: Chip-select assertion time
30- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads
31- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes
32- gpmc,oe-on-ns: Output-enable assertion time
33- gpmc,oe-off-ns: Output-enable de-assertion time
34- gpmc,we-on-ns: Write-enable assertion time
35- gpmc,we-off-ns: Write-enable de-assertion time
36- gpmc,access-ns: Start cycle to first data capture (read access)
37- gpmc,rd-cycle-ns: Total read cycle time
38- gpmc,wr-cycle-ns: Total write cycle time
39- reg: Chip-select, base address (relative to chip-select)
40 and size of the memory mapped for the device.
41 Note that base address will be typically 0 as this
42 is the start of the chip-select.
43
44Optional properties:
45- gpmc,XXX Additional GPMC timings and settings parameters. See
46 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
47
48Example:
49
50gpmc: gpmc@6e000000 {
51 compatible = "ti,omap3430-gpmc";
52 ti,hwmods = "gpmc";
53 reg = <0x6e000000 0x1000>;
54 interrupts = <20>;
55 gpmc,num-cs = <8>;
56 gpmc,num-waitpins = <4>;
57 #address-cells = <2>;
58 #size-cells = <1>;
59
60 ranges = <5 0 0x2c000000 0x1000000>;
61
62 ethernet@5,0 {
63 compatible = "smsc,lan9221", "smsc,lan9115";
64 reg = <5 0 0xff>;
65 bank-width = <2>;
66
67 gpmc,mux-add-data;
68 gpmc,cs-on-ns = <0>;
69 gpmc,cs-rd-off-ns = <186>;
70 gpmc,cs-wr-off-ns = <186>;
71 gpmc,adv-on-ns = <12>;
72 gpmc,adv-rd-off-ns = <48>;
73 gpmc,adv-wr-off-ns = <48>;
74 gpmc,oe-on-ns = <54>;
75 gpmc,oe-off-ns = <168>;
76 gpmc,we-on-ns = <54>;
77 gpmc,we-off-ns = <168>;
78 gpmc,rd-cycle-ns = <186>;
79 gpmc,wr-cycle-ns = <186>;
80 gpmc,access-ns = <114>;
81 gpmc,page-burst-access-ns = <6>;
82 gpmc,bus-turnaround-ns = <12>;
83 gpmc,cycle2cycle-delay-ns = <18>;
84 gpmc,wr-data-mux-bus-ns = <90>;
85 gpmc,wr-access-ns = <186>;
86 gpmc,cycle2cycle-samecsen;
87 gpmc,cycle2cycle-diffcsen;
88
89 interrupt-parent = <&gpio6>;
90 interrupts = <16>;
91 vmmc-supply = <&vddvario>;
92 vmmc_aux-supply = <&vdd33a>;
93 reg-io-width = <4>;
94
95 smsc,save-mac-address;
96 };
97};
Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt+1−1
@@ -197,7 +197,7 @@ Tegra194 RC mode: · 196 unmodified lines
197Tegra194 EP mode:197Tegra194 EP mode:
198-----------------198-----------------
199 199
200 pcie_ep@141a0000 {200 pcie-ep@141a0000 {
201 compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";201 compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
202 power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;202 power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
203 reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */203 reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */
Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt+0−22
@@ -1,22 +0,0 @@
1* Freescale LINFlexD UART
2
3The LINFlexD controller implements several LIN protocol versions, as well as
4support for full-duplex UART communication through 8-bit and 9-bit frames.
5
6See chapter 47 ("LINFlexD") in the reference manual[1].
7
8Required properties:
9- compatible :
10 - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which
11 is compatible with the one integrated on S32V234 SoC
12- reg : Address and length of the register set for the device
13- interrupts : Should contain uart interrupt
14
15Example:
16uart0: serial@40053000 {
17 compatible = "fsl,s32v234-linflexuart";
18 reg = <0x0 0x40053000 0x0 0x1000>;
19 interrupts = <0 59 4>;
20};
21
22[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM
Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml+48−0
@@ -0,0 +1,48 @@
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Freescale LINFlexD UART
8
9description: |
10 The LINFlexD controller implements several LIN protocol versions, as well
11 as support for full-duplex UART communication through 8-bit and 9-bit
12 frames. See chapter 47 ("LINFlexD") in the reference manual
13 https://www.nxp.com/webapp/Download?colCode=S32V234RM.
14
15maintainers:
16 - Chester Lin <clin@suse.com>
17
18allOf:
19 - $ref: "serial.yaml"
20
21properties:
22 compatible:
23 oneOf:
24 - const: fsl,s32v234-linflexuart
25 - items:
26 - const: nxp,s32g2-linflexuart
27 - const: fsl,s32v234-linflexuart
28
29 reg:
30 maxItems: 1
31
32 interrupts:
33 maxItems: 1
34
35required:
36 - compatible
37 - reg
38 - interrupts
39
40unevaluatedProperties: false
41
42examples:
43 - |
44 serial@40053000 {
45 compatible = "fsl,s32v234-linflexuart";
46 reg = <0x40053000 0x1000>;
47 interrupts = <0 59 4>;
48 };
Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml+94−0
@@ -0,0 +1,94 @@
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: NXP i.MX8MM DISP blk-ctrl
8
9maintainers:
10 - Lucas Stach <l.stach@pengutronix.de>
11
12description:
13 The i.MX8MM DISP blk-ctrl is a top-level peripheral providing access to
14 the NoC and ensuring proper power sequencing of the display and MIPI CSI
15 peripherals located in the DISP domain of the SoC.
16
17properties:
18 compatible:
19 items:
20 - const: fsl,imx8mm-disp-blk-ctrl
21 - const: syscon
22
23 reg:
24 maxItems: 1
25
26 '#power-domain-cells':
27 const: 1
28
29 power-domains:
30 minItems: 5
31 maxItems: 5
32
33 power-domain-names:
34 items:
35 - const: bus
36 - const: csi-bridge
37 - const: lcdif
38 - const: mipi-dsi
39 - const: mipi-csi
40
41 clocks:
42 minItems: 10
43 maxItems: 10
44
45 clock-names:
46 items:
47 - const: csi-bridge-axi
48 - const: csi-bridge-apb
49 - const: csi-bridge-core
50 - const: lcdif-axi
51 - const: lcdif-apb
52 - const: lcdif-pix
53 - const: dsi-pclk
54 - const: dsi-ref
55 - const: csi-aclk
56 - const: csi-pclk
57
58required:
59 - compatible
60 - reg
61 - power-domains
62 - power-domain-names
63 - clocks
64 - clock-names
65
66additionalProperties: false
67
68examples:
69 - |
70 #include <dt-bindings/clock/imx8mm-clock.h>
71 #include <dt-bindings/power/imx8mm-power.h>
72
73 disp_blk_ctl: blk_ctrl@32e28000 {
74 compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
75 reg = <0x32e28000 0x100>;
76 power-domains = <&pgc_dispmix>, <&pgc_dispmix>, <&pgc_dispmix>,
77 <&pgc_mipi>, <&pgc_mipi>;
78 power-domain-names = "bus", "csi-bridge", "lcdif",
79 "mipi-dsi", "mipi-csi";
80 clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
81 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
82 <&clk IMX8MM_CLK_CSI1_ROOT>,
83 <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
84 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
85 <&clk IMX8MM_CLK_DISP_ROOT>,
86 <&clk IMX8MM_CLK_DSI_CORE>,
87 <&clk IMX8MM_CLK_DSI_PHY_REF>,
88 <&clk IMX8MM_CLK_CSI1_CORE>,
89 <&clk IMX8MM_CLK_CSI1_PHY_REF>;
90 clock-names = "csi-bridge-axi", "csi-bridge-apb", "csi-bridge-core",
91 "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk",
92 "dsi-ref", "csi-aclk", "csi-pclk";
93 #power-domain-cells = <1>;
94 };
Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml+76−0
@@ -0,0 +1,76 @@
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: NXP i.MX8MM VPU blk-ctrl
8
9maintainers:
10 - Lucas Stach <l.stach@pengutronix.de>
11
12description:
13 The i.MX8MM VPU blk-ctrl is a top-level peripheral providing access to
14 the NoC and ensuring proper power sequencing of the VPU peripherals
15 located in the VPU domain of the SoC.
16
17properties:
18 compatible:
19 items:
20 - const: fsl,imx8mm-vpu-blk-ctrl
21 - const: syscon
22
23 reg:
24 maxItems: 1
25
26 '#power-domain-cells':
27 const: 1
28
29 power-domains:
30 minItems: 4
31 maxItems: 4
32
33 power-domain-names:
34 items:
35 - const: bus
36 - const: g1
37 - const: g2
38 - const: h1
39
40 clocks:
41 minItems: 3
42 maxItems: 3
43
44 clock-names:
45 items:
46 - const: g1
47 - const: g2
48 - const: h1
49
50required:
51 - compatible
52 - reg
53 - power-domains
54 - power-domain-names
55 - clocks
56 - clock-names
57
58additionalProperties: false
59
60examples:
61 - |
62 #include <dt-bindings/clock/imx8mm-clock.h>
63 #include <dt-bindings/power/imx8mm-power.h>
64
65 vpu_blk_ctrl: blk-ctrl@38330000 {
66 compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
67 reg = <0x38330000 0x100>;
68 power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
69 <&pgc_vpu_g2>, <&pgc_vpu_h1>;
70 power-domain-names = "bus", "g1", "g2", "h1";
71 clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
72 <&clk IMX8MM_CLK_VPU_G2_ROOT>,
73 <&clk IMX8MM_CLK_VPU_H1_ROOT>;
74 clock-names = "g1", "g2", "h1";
75 #power-domain-cells = <1>;
76 };
Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml+3−0
@@ -20,6 +20,9 @@ properties: · 19 unmodified lines
20 - const: allwinner,sun6i-a31-i2s20 - const: allwinner,sun6i-a31-i2s
21 - const: allwinner,sun8i-a83t-i2s21 - const: allwinner,sun8i-a83t-i2s
22 - const: allwinner,sun8i-h3-i2s22 - const: allwinner,sun8i-h3-i2s
23 - items:
24 - const: allwinner,sun8i-r40-i2s
25 - const: allwinner,sun8i-h3-i2s
23 - items:26 - items:
24 - const: allwinner,sun8i-v3-i2s27 - const: allwinner,sun8i-v3-i2s
25 - const: allwinner,sun8i-h3-i2s28 - const: allwinner,sun8i-h3-i2s
Documentation/devicetree/bindings/vendor-prefixes.yaml+10−0
@@ -193,6 +193,8 @@ patternProperties: · 192 unmodified lines
193 description: B&R Industrial Automation GmbH193 description: B&R Industrial Automation GmbH
194 "^bticino,.*":194 "^bticino,.*":
195 description: Bticino International195 description: Bticino International
196 "^calamp,.*":
197 description: CalAmp Corp.
196 "^calaosystems,.*":198 "^calaosystems,.*":
197 description: CALAO Systems SAS199 description: CALAO Systems SAS
198 "^calxeda,.*":200 "^calxeda,.*":
@@ -337,6 +339,8 @@ patternProperties: · 138 unmodified lines
337 description: EBV Elektronik339 description: EBV Elektronik
338 "^eckelmann,.*":340 "^eckelmann,.*":
339 description: Eckelmann AG341 description: Eckelmann AG
342 "^edimax,.*":
343 description: EDIMAX Technology Co., Ltd
340 "^edt,.*":344 "^edt,.*":
341 description: Emerging Display Technologies345 description: Emerging Display Technologies
342 "^eeti,.*":346 "^eeti,.*":
@@ -397,6 +401,8 @@ patternProperties: · 54 unmodified lines
397 description: Exar Corporation401 description: Exar Corporation
398 "^excito,.*":402 "^excito,.*":
399 description: Excito403 description: Excito
404 "^exegin,.*":
405 description: Exegin Technologies Limited
400 "^ezchip,.*":406 "^ezchip,.*":
401 description: EZchip Semiconductor407 description: EZchip Semiconductor
402 "^facebook,.*":408 "^facebook,.*":
@@ -581,6 +587,8 @@ patternProperties: · 178 unmodified lines
581 description: JEDEC Solid State Technology Association587 description: JEDEC Solid State Technology Association
582 "^jesurun,.*":588 "^jesurun,.*":
583 description: Shenzhen Jesurun Electronics Business Dept.589 description: Shenzhen Jesurun Electronics Business Dept.
590 "^jethome,.*":
591 description: JetHome (IP Sokolov P.A.)
584 "^jianda,.*":592 "^jianda,.*":
585 description: Jiandangjing Technology Co., Ltd.593 description: Jiandangjing Technology Co., Ltd.
586 "^kam,.*":594 "^kam,.*":
@@ -1108,6 +1116,8 @@ patternProperties: · 521 unmodified lines
1108 description: SpinalHDL1116 description: SpinalHDL
1109 "^sprd,.*":1117 "^sprd,.*":
1110 description: Spreadtrum Communications Inc.1118 description: Spreadtrum Communications Inc.
1119 "^ssi,.*":
1120 description: SSI Computer Corp
1111 "^sst,.*":1121 "^sst,.*":
1112 description: Silicon Storage Technology, Inc.1122 description: Silicon Storage Technology, Inc.
1113 "^sstar,.*":1123 "^sstar,.*":
MAINTAINERS+1−0
@@ -6352,6 +6352,7 @@ L: linux-tegra@vger.kernel.org · 6351 unmodified lines
6352S: Supported6352S: Supported
6353T: git git://anongit.freedesktop.org/tegra/linux.git6353T: git git://anongit.freedesktop.org/tegra/linux.git
6354F: Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt6354F: Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
6355F: Documentation/devicetree/bindings/gpu/host1x/
6355F: drivers/gpu/drm/tegra/6356F: drivers/gpu/drm/tegra/
6356F: drivers/gpu/host1x/6357F: drivers/gpu/host1x/
6357F: include/linux/host1x.h6358F: include/linux/host1x.h
arch/arm/boot/dts/Makefile+24−2
@@ -25,6 +25,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ · 24 unmodified lines
25 usb_a9263.dtb \25 usb_a9263.dtb \
26 at91-foxg20.dtb \26 at91-foxg20.dtb \
27 at91-kizbox.dtb \27 at91-kizbox.dtb \
28 at91-lmu5000.dtb \
28 at91sam9g20ek.dtb \29 at91sam9g20ek.dtb \
29 at91sam9g20ek_2mmc.dtb \30 at91sam9g20ek_2mmc.dtb \
30 tny_a9g20.dtb \31 tny_a9g20.dtb \
@@ -40,6 +41,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ · 9 unmodified lines
40 at91-kizboxmini-base.dtb \41 at91-kizboxmini-base.dtb \
41 at91-kizboxmini-mb.dtb \42 at91-kizboxmini-mb.dtb \
42 at91-kizboxmini-rd.dtb \43 at91-kizboxmini-rd.dtb \
44 at91-q5xr5.dtb \
43 at91-smartkiz.dtb \45 at91-smartkiz.dtb \
44 at91-wb45n.dtb \46 at91-wb45n.dtb \
45 at91sam9g15ek.dtb \47 at91sam9g15ek.dtb \
@@ -92,6 +94,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ · 46 unmodified lines
92 bcm2837-rpi-cm3-io3.dtb \94 bcm2837-rpi-cm3-io3.dtb \
93 bcm2711-rpi-400.dtb \95 bcm2711-rpi-400.dtb \
94 bcm2711-rpi-4-b.dtb \96 bcm2711-rpi-4-b.dtb \
97 bcm2711-rpi-cm4-io.dtb \
95 bcm2835-rpi-zero.dtb \98 bcm2835-rpi-zero.dtb \
96 bcm2835-rpi-zero-w.dtb99 bcm2835-rpi-zero-w.dtb
97dtb-$(CONFIG_ARCH_BCM_5301X) += \100dtb-$(CONFIG_ARCH_BCM_5301X) += \
@@ -117,6 +120,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ · 19 unmodified lines
117 bcm4709-netgear-r7000.dtb \120 bcm4709-netgear-r7000.dtb \
118 bcm4709-netgear-r8000.dtb \121 bcm4709-netgear-r8000.dtb \
119 bcm4709-tplink-archer-c9-v1.dtb \122 bcm4709-tplink-archer-c9-v1.dtb \
123 bcm47094-asus-rt-ac88u.dtb \
120 bcm47094-dlink-dir-885l.dtb \124 bcm47094-dlink-dir-885l.dtb \
121 bcm47094-linksys-panamera.dtb \125 bcm47094-linksys-panamera.dtb \
122 bcm47094-luxul-abr-4500.dtb \126 bcm47094-luxul-abr-4500.dtb \
@@ -157,6 +161,12 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \ · 34 unmodified lines
157 bcm958525xmc.dtb \161 bcm958525xmc.dtb \
158 bcm958622hr.dtb \162 bcm958622hr.dtb \
159 bcm958623hr.dtb \163 bcm958623hr.dtb \
164 bcm958625-meraki-mx64.dtb \
165 bcm958625-meraki-mx64-a0.dtb \
166 bcm958625-meraki-mx64w.dtb \
167 bcm958625-meraki-mx64w-a0.dtb \
168 bcm958625-meraki-mx65.dtb \
169 bcm958625-meraki-mx65w.dtb \
160 bcm958625hr.dtb \170 bcm958625hr.dtb \
161 bcm988312hr.dtb \171 bcm988312hr.dtb \
162 bcm958625k.dtb172 bcm958625k.dtb
@@ -219,9 +229,11 @@ dtb-$(CONFIG_ARCH_GEMINI) += \ · 56 unmodified lines
219 gemini-dlink-dir-685.dtb \229 gemini-dlink-dir-685.dtb \
220 gemini-dlink-dns-313.dtb \230 gemini-dlink-dns-313.dtb \
221 gemini-nas4220b.dtb \231 gemini-nas4220b.dtb \
232 gemini-ns2502.dtb \
222 gemini-rut1xx.dtb \233 gemini-rut1xx.dtb \
223 gemini-sl93512r.dtb \234 gemini-sl93512r.dtb \
224 gemini-sq201.dtb \235 gemini-sq201.dtb \
236 gemini-ssi1328.dtb \
225 gemini-wbd111.dtb \237 gemini-wbd111.dtb \
226 gemini-wbd222.dtb238 gemini-wbd222.dtb
227dtb-$(CONFIG_ARCH_HI3xxx) += \239dtb-$(CONFIG_ARCH_HI3xxx) += \
@@ -635,10 +647,12 @@ dtb-$(CONFIG_SOC_IMX6SL) += \ · 407 unmodified lines
635 imx6sl-evk.dtb \647 imx6sl-evk.dtb \
636 imx6sl-tolino-shine2hd.dtb \648 imx6sl-tolino-shine2hd.dtb \
637 imx6sl-tolino-shine3.dtb \649 imx6sl-tolino-shine3.dtb \
650 imx6sl-tolino-vision5.dtb \
638 imx6sl-warp.dtb651 imx6sl-warp.dtb
639dtb-$(CONFIG_SOC_IMX6SLL) += \652dtb-$(CONFIG_SOC_IMX6SLL) += \
640 imx6sll-evk.dtb \653 imx6sll-evk.dtb \
641 imx6sll-kobo-clarahd.dtb654 imx6sll-kobo-clarahd.dtb \
655 imx6sll-kobo-librah2o.dtb
642dtb-$(CONFIG_SOC_IMX6SX) += \656dtb-$(CONFIG_SOC_IMX6SX) += \
643 imx6sx-nitrogen6sx.dtb \657 imx6sx-nitrogen6sx.dtb \
644 imx6sx-sabreauto.dtb \658 imx6sx-sabreauto.dtb \
@@ -671,6 +685,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ · 26 unmodified lines
671 imx6ul-tx6ul-0011.dtb \685 imx6ul-tx6ul-0011.dtb \
672 imx6ul-tx6ul-mainboard.dtb \686 imx6ul-tx6ul-mainboard.dtb \
673 imx6ull-14x14-evk.dtb \687 imx6ull-14x14-evk.dtb \
688 imx6ull-colibri-emmc-eval-v3.dtb \
674 imx6ull-colibri-eval-v3.dtb \689 imx6ull-colibri-eval-v3.dtb \
675 imx6ull-colibri-wifi-eval-v3.dtb \690 imx6ull-colibri-wifi-eval-v3.dtb \
676 imx6ull-myir-mys-6ulx-eval.dtb \691 imx6ull-myir-mys-6ulx-eval.dtb \
@@ -939,6 +954,7 @@ dtb-$(CONFIG_ARCH_OXNAS) += \ · 262 unmodified lines
939 ox810se-wd-mbwe.dtb \954 ox810se-wd-mbwe.dtb \
940 ox820-cloudengines-pogoplug-series-3.dtb955 ox820-cloudengines-pogoplug-series-3.dtb
941dtb-$(CONFIG_ARCH_QCOM) += \956dtb-$(CONFIG_ARCH_QCOM) += \
957 qcom-apq8026-lg-lenok.dtb \
942 qcom-apq8060-dragonboard.dtb \958 qcom-apq8060-dragonboard.dtb \
943 qcom-apq8064-cm-qs600.dtb \959 qcom-apq8064-cm-qs600.dtb \
944 qcom-apq8064-ifc6410.dtb \960 qcom-apq8064-ifc6410.dtb \
@@ -959,6 +975,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ · 14 unmodified lines
959 qcom-ipq8064-rb3011.dtb \975 qcom-ipq8064-rb3011.dtb \
960 qcom-msm8226-samsung-s3ve3g.dtb \976 qcom-msm8226-samsung-s3ve3g.dtb \
961 qcom-msm8660-surf.dtb \977 qcom-msm8660-surf.dtb \
978 qcom-msm8916-samsung-serranove.dtb \
962 qcom-msm8960-cdp.dtb \979 qcom-msm8960-cdp.dtb \
963 qcom-msm8974-fairphone-fp2.dtb \980 qcom-msm8974-fairphone-fp2.dtb \
964 qcom-msm8974-lge-nexus5-hammerhead.dtb \981 qcom-msm8974-lge-nexus5-hammerhead.dtb \
@@ -1075,6 +1092,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += \ · 110 unmodified lines
1075 s5pv210-torbreck.dtb1092 s5pv210-torbreck.dtb
1076dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \1093dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
1077 socfpga_arria5_socdk.dtb \1094 socfpga_arria5_socdk.dtb \
1095 socfpga_arria10_mercury_aa1.dtb \
1078 socfpga_arria10_socdk_nand.dtb \1096 socfpga_arria10_socdk_nand.dtb \
1079 socfpga_arria10_socdk_qspi.dtb \1097 socfpga_arria10_socdk_qspi.dtb \
1080 socfpga_arria10_socdk_sdmmc.dtb \1098 socfpga_arria10_socdk_sdmmc.dtb \
@@ -1113,6 +1131,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ · 32 unmodified lines
1113 stm32h743i-eval.dtb \1131 stm32h743i-eval.dtb \
1114 stm32h743i-disco.dtb \1132 stm32h743i-disco.dtb \
1115 stm32h750i-art-pi.dtb \1133 stm32h750i-art-pi.dtb \
1134 stm32mp135f-dk.dtb \
1116 stm32mp153c-dhcom-drc02.dtb \1135 stm32mp153c-dhcom-drc02.dtb \
1117 stm32mp157a-avenger96.dtb \1136 stm32mp157a-avenger96.dtb \
1118 stm32mp157a-dhcor-avenger96.dtb \1137 stm32mp157a-dhcor-avenger96.dtb \
@@ -1387,6 +1406,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ · 268 unmodified lines
1387dtb-$(CONFIG_MACH_ARMADA_375) += \1406dtb-$(CONFIG_MACH_ARMADA_375) += \
1388 armada-375-db.dtb1407 armada-375-db.dtb
1389dtb-$(CONFIG_MACH_ARMADA_38X) += \1408dtb-$(CONFIG_MACH_ARMADA_38X) += \
1409 armada-381-netgear-gs110emx.dtb \
1390 armada-382-rd-ac3x-48g4x2xl.dtb \1410 armada-382-rd-ac3x-48g4x2xl.dtb \
1391 armada-385-atl-x530.dtb\1411 armada-385-atl-x530.dtb\
1392 armada-385-clearfog-gtr-s4.dtb \1412 armada-385-clearfog-gtr-s4.dtb \
@@ -1497,4 +1517,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ · 104 unmodified lines
1497 aspeed-bmc-opp-zaius.dtb \1517 aspeed-bmc-opp-zaius.dtb \
1498 aspeed-bmc-portwell-neptune.dtb \1518 aspeed-bmc-portwell-neptune.dtb \
1499 aspeed-bmc-quanta-q71l.dtb \1519 aspeed-bmc-quanta-q71l.dtb \
1500 aspeed-bmc-supermicro-x11spi.dtb1520 aspeed-bmc-supermicro-x11spi.dtb \
1521 aspeed-bmc-inventec-transformers.dtb \
1522 aspeed-bmc-tyan-s7106.dtb
arch/arm/boot/dts/am335x-pocketbeagle.dts+1−0
@@ -205,6 +205,7 @@ · 204 unmodified lines
205 205
206&am33xx_pinmux {206&am33xx_pinmux {
207 207
208 compatible = "pinconf-single";
208 pinctrl-names = "default";209 pinctrl-names = "default";
209 210
210 pinctrl-0 = < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio211 pinctrl-0 = < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio
arch/arm/boot/dts/arm-realview-eb.dtsi+29−13
@@ -198,96 +198,112 @@ · 197 unmodified lines
198 syscon: syscon@10000000 {198 syscon: syscon@10000000 {
199 compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";199 compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
200 reg = <0x10000000 0x1000>;200 reg = <0x10000000 0x1000>;
201 ranges = <0x0 0x10000000 0x1000>;
202 #address-cells = <1>;
203 #size-cells = <1>;
201 204
202 led@08.0 {205 led@8,0 {
203 compatible = "register-bit-led";206 compatible = "register-bit-led";
207 reg = <0x08 0x04>;
204 offset = <0x08>;208 offset = <0x08>;
205 mask = <0x01>;209 mask = <0x01>;
206 label = "versatile:0";210 label = "versatile:0";
207 linux,default-trigger = "heartbeat";211 linux,default-trigger = "heartbeat";
208 default-state = "on";212 default-state = "on";
209 };213 };
210 led@08.1 {214 led@8,1 {
211 compatible = "register-bit-led";215 compatible = "register-bit-led";
216 reg = <0x08 0x04>;
212 offset = <0x08>;217 offset = <0x08>;
213 mask = <0x02>;218 mask = <0x02>;
214 label = "versatile:1";219 label = "versatile:1";
215 linux,default-trigger = "mmc0";220 linux,default-trigger = "mmc0";
216 default-state = "off";221 default-state = "off";
217 };222 };
218 led@08.2 {223 led@8,2 {
219 compatible = "register-bit-led";224 compatible = "register-bit-led";
225 reg = <0x08 0x04>;
220 offset = <0x08>;226 offset = <0x08>;
221 mask = <0x04>;227 mask = <0x04>;
222 label = "versatile:2";228 label = "versatile:2";
223 linux,default-trigger = "cpu0";229 linux,default-trigger = "cpu0";
224 default-state = "off";230 default-state = "off";
225 };231 };
226 led@08.3 {232 led@8,3 {
227 compatible = "register-bit-led";233 compatible = "register-bit-led";
234 reg = <0x08 0x04>;
228 offset = <0x08>;235 offset = <0x08>;
229 mask = <0x08>;236 mask = <0x08>;
230 label = "versatile:3";237 label = "versatile:3";
231 default-state = "off";238 default-state = "off";
232 };239 };
233 led@08.4 {240 led@8,4 {
234 compatible = "register-bit-led";241 compatible = "register-bit-led";
242 reg = <0x08 0x04>;
235 offset = <0x08>;243 offset = <0x08>;
236 mask = <0x10>;244 mask = <0x10>;
237 label = "versatile:4";245 label = "versatile:4";
238 default-state = "off";246 default-state = "off";
239 };247 };
240 led@08.5 {248 led@8,5 {
241 compatible = "register-bit-led";249 compatible = "register-bit-led";
250 reg = <0x08 0x04>;
242 offset = <0x08>;251 offset = <0x08>;
243 mask = <0x20>;252 mask = <0x20>;
244 label = "versatile:5";253 label = "versatile:5";
245 default-state = "off";254 default-state = "off";
246 };255 };
247 led@08.6 {256 led@8,6 {
248 compatible = "register-bit-led";257 compatible = "register-bit-led";
258 reg = <0x08 0x04>;
249 offset = <0x08>;259 offset = <0x08>;
250 mask = <0x40>;260 mask = <0x40>;
251 label = "versatile:6";261 label = "versatile:6";
252 default-state = "off";262 default-state = "off";
253 };263 };
254 led@08.7 {264 led@8,7 {
255 compatible = "register-bit-led";265 compatible = "register-bit-led";
266 reg = <0x08 0x04>;
256 offset = <0x08>;267 offset = <0x08>;
257 mask = <0x80>;268 mask = <0x80>;
258 label = "versatile:7";269 label = "versatile:7";
259 default-state = "off";270 default-state = "off";
260 };271 };
261 oscclk0: osc0@0c {272 oscclk0: clock-controller@c {
262 compatible = "arm,syscon-icst307";273 compatible = "arm,syscon-icst307";
274 reg = <0x0c 0x04>;
263 #clock-cells = <0>;275 #clock-cells = <0>;
264 lock-offset = <0x20>;276 lock-offset = <0x20>;
265 vco-offset = <0x0C>;277 vco-offset = <0x0C>;
266 clocks = <&xtal24mhz>;278 clocks = <&xtal24mhz>;
267 };279 };
268 oscclk1: osc1@10 {280 oscclk1: clock-controller@10 {
269 compatible = "arm,syscon-icst307";281 compatible = "arm,syscon-icst307";
282 reg = <0x10 0x04>;
270 #clock-cells = <0>;283 #clock-cells = <0>;
271 lock-offset = <0x20>;284 lock-offset = <0x20>;
272 vco-offset = <0x10>;285 vco-offset = <0x10>;
273 clocks = <&xtal24mhz>;286 clocks = <&xtal24mhz>;
274 };287 };
275 oscclk2: osc2@14 {288 oscclk2: clock-controller@14 {
276 compatible = "arm,syscon-icst307";289 compatible = "arm,syscon-icst307";
290 reg = <0x14 0x04>;
277 #clock-cells = <0>;291 #clock-cells = <0>;
278 lock-offset = <0x20>;292 lock-offset = <0x20>;
279 vco-offset = <0x14>;293 vco-offset = <0x14>;
280 clocks = <&xtal24mhz>;294 clocks = <&xtal24mhz>;
281 };295 };
282 oscclk3: osc3@18 {296 oscclk3: clock-controller@18 {
283 compatible = "arm,syscon-icst307";297 compatible = "arm,syscon-icst307";
298 reg = <0x18 0x04>;
284 #clock-cells = <0>;299 #clock-cells = <0>;
285 lock-offset = <0x20>;300 lock-offset = <0x20>;
286 vco-offset = <0x18>;301 vco-offset = <0x18>;
287 clocks = <&xtal24mhz>;302 clocks = <&xtal24mhz>;
288 };303 };
289 oscclk4: osc4@1c {304 oscclk4: clock-controller@1c {
290 compatible = "arm,syscon-icst307";305 compatible = "arm,syscon-icst307";
306 reg = <0x1c 0x04>;
291 #clock-cells = <0>;307 #clock-cells = <0>;
292 lock-offset = <0x20>;308 lock-offset = <0x20>;
293 vco-offset = <0x1c>;309 vco-offset = <0x1c>;
arch/arm/boot/dts/arm-realview-pb1176.dts+29−13
@@ -216,96 +216,112 @@ · 215 unmodified lines
216 syscon: syscon@10000000 {216 syscon: syscon@10000000 {
217 compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";217 compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
218 reg = <0x10000000 0x1000>;218 reg = <0x10000000 0x1000>;
219 ranges = <0x0 0x10000000 0x1000>;
220 #address-cells = <1>;
221 #size-cells = <1>;
219 222
220 led@08.0 {223 led@8,0 {
221 compatible = "register-bit-led";224 compatible = "register-bit-led";
225 reg = <0x08 0x04>;
222 offset = <0x08>;226 offset = <0x08>;
223 mask = <0x01>;227 mask = <0x01>;
224 label = "versatile:0";228 label = "versatile:0";
225 linux,default-trigger = "heartbeat";229 linux,default-trigger = "heartbeat";
226 default-state = "on";230 default-state = "on";
227 };231 };
228 led@08.1 {232 led@8,1 {
229 compatible = "register-bit-led";233 compatible = "register-bit-led";
234 reg = <0x08 0x04>;
230 offset = <0x08>;235 offset = <0x08>;
231 mask = <0x02>;236 mask = <0x02>;
232 label = "versatile:1";237 label = "versatile:1";
233 linux,default-trigger = "mmc0";238 linux,default-trigger = "mmc0";
234 default-state = "off";239 default-state = "off";
235 };240 };
236 led@08.2 {241 led@8,2 {
237 compatible = "register-bit-led";242 compatible = "register-bit-led";
243 reg = <0x08 0x04>;
238 offset = <0x08>;244 offset = <0x08>;
239 mask = <0x04>;245 mask = <0x04>;
240 label = "versatile:2";246 label = "versatile:2";
241 linux,default-trigger = "cpu0";247 linux,default-trigger = "cpu0";
242 default-state = "off";248 default-state = "off";
243 };249 };
244 led@08.3 {250 led@8,3 {
245 compatible = "register-bit-led";251 compatible = "register-bit-led";
252 reg = <0x08 0x04>;
246 offset = <0x08>;253 offset = <0x08>;
247 mask = <0x08>;254 mask = <0x08>;
248 label = "versatile:3";255 label = "versatile:3";
249 default-state = "off";256 default-state = "off";
250 };257 };
251 led@08.4 {258 led@8,4 {
252 compatible = "register-bit-led";259 compatible = "register-bit-led";
260 reg = <0x08 0x04>;
253 offset = <0x08>;261 offset = <0x08>;
254 mask = <0x10>;262 mask = <0x10>;
255 label = "versatile:4";263 label = "versatile:4";
256 default-state = "off";264 default-state = "off";
257 };265 };
258 led@08.5 {266 led@8,5 {
259 compatible = "register-bit-led";267 compatible = "register-bit-led";
268 reg = <0x08 0x04>;
260 offset = <0x08>;269 offset = <0x08>;
261 mask = <0x20>;270 mask = <0x20>;
262 label = "versatile:5";271 label = "versatile:5";
263 default-state = "off";272 default-state = "off";
264 };273 };
265 led@08.6 {274 led@8,6 {
266 compatible = "register-bit-led";275 compatible = "register-bit-led";
276 reg = <0x08 0x04>;
267 offset = <0x08>;277 offset = <0x08>;
268 mask = <0x40>;278 mask = <0x40>;
269 label = "versatile:6";279 label = "versatile:6";
270 default-state = "off";280 default-state = "off";
271 };281 };
272 led@08.7 {282 led@8,7 {
273 compatible = "register-bit-led";283 compatible = "register-bit-led";
284 reg = <0x08 0x04>;
274 offset = <0x08>;285 offset = <0x08>;
275 mask = <0x80>;286 mask = <0x80>;
276 label = "versatile:7";287 label = "versatile:7";
277 default-state = "off";288 default-state = "off";
278 };289 };
279 oscclk0: osc0@0c {290 oscclk0: clock-controller@c {
280 compatible = "arm,syscon-icst307";291 compatible = "arm,syscon-icst307";
292 reg = <0x0c 0x04>;
281 #clock-cells = <0>;293 #clock-cells = <0>;
282 lock-offset = <0x20>;294 lock-offset = <0x20>;
283 vco-offset = <0x0C>;295 vco-offset = <0x0C>;
284 clocks = <&xtal24mhz>;296 clocks = <&xtal24mhz>;
285 };297 };
286 oscclk1: osc1@10 {298 oscclk1: clock-controller@10 {
287 compatible = "arm,syscon-icst307";299 compatible = "arm,syscon-icst307";
300 reg = <0x10 0x04>;
288 #clock-cells = <0>;301 #clock-cells = <0>;
289 lock-offset = <0x20>;302 lock-offset = <0x20>;
290 vco-offset = <0x10>;303 vco-offset = <0x10>;
291 clocks = <&xtal24mhz>;304 clocks = <&xtal24mhz>;
292 };305 };
293 oscclk2: osc2@14 {306 oscclk2: clock-controller@14 {
294 compatible = "arm,syscon-icst307";307 compatible = "arm,syscon-icst307";
308 reg = <0x14 0x04>;
295 #clock-cells = <0>;309 #clock-cells = <0>;
296 lock-offset = <0x20>;310 lock-offset = <0x20>;
297 vco-offset = <0x14>;311 vco-offset = <0x14>;
298 clocks = <&xtal24mhz>;312 clocks = <&xtal24mhz>;
299 };313 };
300 oscclk3: osc3@18 {314 oscclk3: clock-controller@18 {
301 compatible = "arm,syscon-icst307";315 compatible = "arm,syscon-icst307";
316 reg = <0x18 0x04>;
302 #clock-cells = <0>;317 #clock-cells = <0>;
303 lock-offset = <0x20>;318 lock-offset = <0x20>;
304 vco-offset = <0x18>;319 vco-offset = <0x18>;
305 clocks = <&xtal24mhz>;320 clocks = <&xtal24mhz>;
306 };321 };
307 oscclk4: osc4@1c {322 oscclk4: clock-controller@1c {
308 compatible = "arm,syscon-icst307";323 compatible = "arm,syscon-icst307";
324 reg = <0x1c 0x04>;
309 #clock-cells = <0>;325 #clock-cells = <0>;
310 lock-offset = <0x20>;326 lock-offset = <0x20>;
311 vco-offset = <0x1c>;327 vco-offset = <0x1c>;
arch/arm/boot/dts/arm-realview-pb11mp.dts+33−15
@@ -303,114 +303,132 @@ · 302 unmodified lines
303 pb11mp_syscon: syscon@10000000 {303 pb11mp_syscon: syscon@10000000 {
304 compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";304 compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
305 reg = <0x10000000 0x1000>;305 reg = <0x10000000 0x1000>;
306 ranges = <0x0 0x10000000 0x1000>;
307 #address-cells = <1>;
308 #size-cells = <1>;
306 309
307 led@08.0 {310 led@8,0 {
308 compatible = "register-bit-led";311 compatible = "register-bit-led";
312 reg = <0x08 0x04>;
309 offset = <0x08>;313 offset = <0x08>;
310 mask = <0x01>;314 mask = <0x01>;
311 label = "versatile:0";315 label = "versatile:0";
312 linux,default-trigger = "heartbeat";316 linux,default-trigger = "heartbeat";
313 default-state = "on";317 default-state = "on";
314 };318 };
315 led@08.1 {319 led@8,1 {
316 compatible = "register-bit-led";320 compatible = "register-bit-led";
321 reg = <0x08 0x04>;
317 offset = <0x08>;322 offset = <0x08>;
318 mask = <0x02>;323 mask = <0x02>;
319 label = "versatile:1";324 label = "versatile:1";
320 linux,default-trigger = "mmc0";325 linux,default-trigger = "mmc0";
321 default-state = "off";326 default-state = "off";
322 };327 };
323 led@08.2 {328 led@8,2 {
324 compatible = "register-bit-led";329 compatible = "register-bit-led";
330 reg = <0x08 0x04>;
325 offset = <0x08>;331 offset = <0x08>;
326 mask = <0x04>;332 mask = <0x04>;
327 label = "versatile:2";333 label = "versatile:2";
328 linux,default-trigger = "cpu0";334 linux,default-trigger = "cpu0";
329 default-state = "off";335 default-state = "off";
330 };336 };
331 led@08.3 {337 led@8,3 {
332 compatible = "register-bit-led";338 compatible = "register-bit-led";
339 reg = <0x08 0x04>;
333 offset = <0x08>;340 offset = <0x08>;
334 mask = <0x08>;341 mask = <0x08>;
335 label = "versatile:3";342 label = "versatile:3";
336 linux,default-trigger = "cpu1";343 linux,default-trigger = "cpu1";
337 default-state = "off";344 default-state = "off";
338 };345 };
339 led@08.4 {346 led@8,4 {
340 compatible = "register-bit-led";347 compatible = "register-bit-led";
348 reg = <0x08 0x04>;
341 offset = <0x08>;349 offset = <0x08>;
342 mask = <0x10>;350 mask = <0x10>;
343 label = "versatile:4";351 label = "versatile:4";
344 linux,default-trigger = "cpu2";352 linux,default-trigger = "cpu2";
345 default-state = "off";353 default-state = "off";
346 };354 };
347 led@08.5 {355 led@8,5 {
348 compatible = "register-bit-led";356 compatible = "register-bit-led";
357 reg = <0x08 0x04>;
349 offset = <0x08>;358 offset = <0x08>;
350 mask = <0x20>;359 mask = <0x20>;
351 label = "versatile:5";360 label = "versatile:5";
352 linux,default-trigger = "cpu3";361 linux,default-trigger = "cpu3";
353 default-state = "off";362 default-state = "off";
354 };363 };
355 led@08.6 {364 led@8,6 {
356 compatible = "register-bit-led";365 compatible = "register-bit-led";
366 reg = <0x08 0x04>;
357 offset = <0x08>;367 offset = <0x08>;
358 mask = <0x40>;368 mask = <0x40>;
359 label = "versatile:6";369 label = "versatile:6";
360 default-state = "off";370 default-state = "off";
361 };371 };
362 led@08.7 {372 led@8,7 {
363 compatible = "register-bit-led";373 compatible = "register-bit-led";
374 reg = <0x08 0x04>;
364 offset = <0x08>;375 offset = <0x08>;
365 mask = <0x80>;376 mask = <0x80>;
366 label = "versatile:7";377 label = "versatile:7";
367 default-state = "off";378 default-state = "off";
368 };379 };
369 380
370 oscclk0: osc0@0c {381 oscclk0: clock-controller@c {
371 compatible = "arm,syscon-icst307";382 compatible = "arm,syscon-icst307";
383 reg = <0x0c 0x04>;
372 #clock-cells = <0>;384 #clock-cells = <0>;
373 lock-offset = <0x20>;385 lock-offset = <0x20>;
374 vco-offset = <0x0C>;386 vco-offset = <0x0C>;
375 clocks = <&xtal24mhz>;387 clocks = <&xtal24mhz>;
376 };388 };
377 oscclk1: osc1@10 {389 oscclk1: clock-controller@10 {
378 compatible = "arm,syscon-icst307";390 compatible = "arm,syscon-icst307";
391 reg = <0x10 0x04>;
379 #clock-cells = <0>;392 #clock-cells = <0>;
380 lock-offset = <0x20>;393 lock-offset = <0x20>;
381 vco-offset = <0x10>;394 vco-offset = <0x10>;
382 clocks = <&xtal24mhz>;395 clocks = <&xtal24mhz>;
383 };396 };
384 oscclk2: osc2@14 {397 oscclk2: clock-controller@14 {
385 compatible = "arm,syscon-icst307";398 compatible = "arm,syscon-icst307";
399 reg = <0x14 0x04>;
386 #clock-cells = <0>;400 #clock-cells = <0>;
387 lock-offset = <0x20>;401 lock-offset = <0x20>;
388 vco-offset = <0x14>;402 vco-offset = <0x14>;
389 clocks = <&xtal24mhz>;403 clocks = <&xtal24mhz>;
390 };404 };
391 oscclk3: osc3@18 {405 oscclk3: clock-controller@18 {
392 compatible = "arm,syscon-icst307";406 compatible = "arm,syscon-icst307";
407 reg = <0x18 0x04>;
393 #clock-cells = <0>;408 #clock-cells = <0>;
394 lock-offset = <0x20>;409 lock-offset = <0x20>;
395 vco-offset = <0x18>;410 vco-offset = <0x18>;
396 clocks = <&xtal24mhz>;411 clocks = <&xtal24mhz>;
397 };412 };
398 oscclk4: osc4@1c {413 oscclk4: clock-controller@1c {
399 compatible = "arm,syscon-icst307";414 compatible = "arm,syscon-icst307";
415 reg = <0x1c 0x04>;
400 #clock-cells = <0>;416 #clock-cells = <0>;
401 lock-offset = <0x20>;417 lock-offset = <0x20>;
402 vco-offset = <0x1c>;418 vco-offset = <0x1c>;
403 clocks = <&xtal24mhz>;419 clocks = <&xtal24mhz>;
404 };420 };
405 oscclk5: osc5@d4 {421 oscclk5: clock-controller@d4 {
406 compatible = "arm,syscon-icst307";422 compatible = "arm,syscon-icst307";
423 reg = <0xd4 0x04>;
407 #clock-cells = <0>;424 #clock-cells = <0>;
408 lock-offset = <0x20>;425 lock-offset = <0x20>;
409 vco-offset = <0xd4>;426 vco-offset = <0xd4>;
410 clocks = <&xtal24mhz>;427 clocks = <&xtal24mhz>;
411 };428 };
412 oscclk6: osc6@d8 {429 oscclk6: clock-controller@d8 {
413 compatible = "arm,syscon-icst307";430 compatible = "arm,syscon-icst307";
431 reg = <0xd8 0x04>;
414 #clock-cells = <0>;432 #clock-cells = <0>;
415 lock-offset = <0x20>;433 lock-offset = <0x20>;
416 vco-offset = <0xd8>;434 vco-offset = <0xd8>;
arch/arm/boot/dts/arm-realview-pbx.dtsi+29−13
@@ -220,96 +220,112 @@ · 219 unmodified lines
220 syscon: syscon@10000000 {220 syscon: syscon@10000000 {
221 compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";221 compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
222 reg = <0x10000000 0x1000>;222 reg = <0x10000000 0x1000>;
223 ranges = <0x0 0x10000000 0x1000>;
224 #address-cells = <1>;
225 #size-cells = <1>;
223 226
224 led@08.0 {227 led@8,0 {
225 compatible = "register-bit-led";228 compatible = "register-bit-led";
229 reg = <0x08 0x04>;
226 offset = <0x08>;230 offset = <0x08>;
227 mask = <0x01>;231 mask = <0x01>;
228 label = "versatile:0";232 label = "versatile:0";
229 linux,default-trigger = "heartbeat";233 linux,default-trigger = "heartbeat";
230 default-state = "on";234 default-state = "on";
231 };235 };
232 led@08.1 {236 led@8,1 {
233 compatible = "register-bit-led";237 compatible = "register-bit-led";
238 reg = <0x08 0x04>;
234 offset = <0x08>;239 offset = <0x08>;
235 mask = <0x02>;240 mask = <0x02>;
236 label = "versatile:1";241 label = "versatile:1";
237 linux,default-trigger = "mmc0";242 linux,default-trigger = "mmc0";
238 default-state = "off";243 default-state = "off";
239 };244 };
240 led@08.2 {245 led@8,2 {
241 compatible = "register-bit-led";246 compatible = "register-bit-led";
247 reg = <0x08 0x04>;
242 offset = <0x08>;248 offset = <0x08>;
243 mask = <0x04>;249 mask = <0x04>;
244 label = "versatile:2";250 label = "versatile:2";
245 linux,default-trigger = "cpu0";251 linux,default-trigger = "cpu0";
246 default-state = "off";252 default-state = "off";
247 };253 };
248 led@08.3 {254 led@8,3 {
249 compatible = "register-bit-led";255 compatible = "register-bit-led";
256 reg = <0x08 0x04>;
250 offset = <0x08>;257 offset = <0x08>;
251 mask = <0x08>;258 mask = <0x08>;
252 label = "versatile:3";259 label = "versatile:3";
253 default-state = "off";260 default-state = "off";
254 };261 };
255 led@08.4 {262 led@8,4 {
256 compatible = "register-bit-led";263 compatible = "register-bit-led";
264 reg = <0x08 0x04>;
257 offset = <0x08>;265 offset = <0x08>;
258 mask = <0x10>;266 mask = <0x10>;
259 label = "versatile:4";267 label = "versatile:4";
260 default-state = "off";268 default-state = "off";
261 };269 };
262 led@08.5 {270 led@8,5 {
263 compatible = "register-bit-led";271 compatible = "register-bit-led";
272 reg = <0x08 0x04>;
264 offset = <0x08>;273 offset = <0x08>;
265 mask = <0x20>;274 mask = <0x20>;
266 label = "versatile:5";275 label = "versatile:5";
267 default-state = "off";276 default-state = "off";
268 };277 };
269 led@08.6 {278 led@8,6 {
270 compatible = "register-bit-led";279 compatible = "register-bit-led";
280 reg = <0x08 0x04>;
271 offset = <0x08>;281 offset = <0x08>;
272 mask = <0x40>;282 mask = <0x40>;
273 label = "versatile:6";283 label = "versatile:6";
274 default-state = "off";284 default-state = "off";
275 };285 };
276 led@08.7 {286 led@8,7 {
277 compatible = "register-bit-led";287 compatible = "register-bit-led";
288 reg = <0x08 0x04>;
278 offset = <0x08>;289 offset = <0x08>;
279 mask = <0x80>;290 mask = <0x80>;
280 label = "versatile:7";291 label = "versatile:7";
281 default-state = "off";292 default-state = "off";
282 };293 };
283 oscclk0: osc0@0c {294 oscclk0: clock-controller@c {
284 compatible = "arm,syscon-icst307";295 compatible = "arm,syscon-icst307";
296 reg = <0x0c 0x04>;
285 #clock-cells = <0>;297 #clock-cells = <0>;
286 lock-offset = <0x20>;298 lock-offset = <0x20>;
287 vco-offset = <0x0C>;299 vco-offset = <0x0C>;
288 clocks = <&xtal24mhz>;300 clocks = <&xtal24mhz>;
289 };301 };
290 oscclk1: osc1@10 {302 oscclk1: clock-controller@10 {
291 compatible = "arm,syscon-icst307";303 compatible = "arm,syscon-icst307";
304 reg = <0x10 0x04>;
292 #clock-cells = <0>;305 #clock-cells = <0>;
293 lock-offset = <0x20>;306 lock-offset = <0x20>;
294 vco-offset = <0x10>;307 vco-offset = <0x10>;
295 clocks = <&xtal24mhz>;308 clocks = <&xtal24mhz>;
296 };309 };
297 oscclk2: osc2@14 {310 oscclk2: clock-controller@14 {
298 compatible = "arm,syscon-icst307";311 compatible = "arm,syscon-icst307";
312 reg = <0x14 0x04>;
299 #clock-cells = <0>;313 #clock-cells = <0>;
300 lock-offset = <0x20>;314 lock-offset = <0x20>;
301 vco-offset = <0x14>;315 vco-offset = <0x14>;
302 clocks = <&xtal24mhz>;316 clocks = <&xtal24mhz>;
303 };317 };
304 oscclk3: osc3@18 {318 oscclk3: clock-controller@18 {
305 compatible = "arm,syscon-icst307";319 compatible = "arm,syscon-icst307";
320 reg = <0x18 0x04>;
306 #clock-cells = <0>;321 #clock-cells = <0>;
307 lock-offset = <0x20>;322 lock-offset = <0x20>;
308 vco-offset = <0x18>;323 vco-offset = <0x18>;
309 clocks = <&xtal24mhz>;324 clocks = <&xtal24mhz>;
310 };325 };
311 oscclk4: osc4@1c {326 oscclk4: clock-controller@1c {
312 compatible = "arm,syscon-icst307";327 compatible = "arm,syscon-icst307";
328 reg = <0x1c 0x04>;
313 #clock-cells = <0>;329 #clock-cells = <0>;
314 lock-offset = <0x20>;330 lock-offset = <0x20>;
315 vco-offset = <0x1c>;331 vco-offset = <0x1c>;
arch/arm/boot/dts/armada-381-netgear-gs110emx.dts+295−0
@@ -0,0 +1,295 @@
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/* Copyright (c) 2021, Marcel Ziswiler <marcel@ziswiler.com> */
3
4/dts-v1/;
5#include "armada-385.dtsi"
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/input.h>
8
9/ {
10 model = "Netgear GS110EMX";
11 compatible = "netgear,gs110emx", "marvell,armada380";
12
13 aliases {
14 /* So that mvebu u-boot can update the MAC addresses */
15 ethernet1 = &eth0;
16 };
17
18 chosen {
19 stdout-path = "serial0:115200n8";
20 };
21
22 gpio-keys {
23 compatible = "gpio-keys";
24 pinctrl-0 = <&front_button_pins>;
25 pinctrl-names = "default";
26
27 factory_default {
28 label = "Factory Default";
29 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
30 linux,code = <KEY_RESTART>;
31 };
32 };
33
34 memory {
35 device_type = "memory";
36 reg = <0x00000000 0x08000000>; /* 128 MB */
37 };
38
39 soc {
40 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
41 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
42 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
43 MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
44 MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
45
46 internal-regs {
47 rtc@a3800 {
48 /*
49 * If the rtc doesn't work, run "date reset"
50 * twice in u-boot.
51 */
52 status = "okay";
53 };
54 };
55 };
56};
57
58&eth0 {
59 /* ethernet@70000 */
60 bm,pool-long = <0>;
61 bm,pool-short = <1>;
62 buffer-manager = <&bm>;
63 phy-mode = "rgmii-id";
64 pinctrl-0 = <&ge0_rgmii_pins>;
65 pinctrl-names = "default";
66 status = "okay";
67
68 fixed-link {
69 full-duplex;
70 pause;
71 speed = <1000>;
72 };
73};
74
75&mdio {
76 pinctrl-names = "default";
77 pinctrl-0 = <&mdio_pins>;
78 status = "okay";
79
80 switch@0 {
81 compatible = "marvell,mv88e6190";
82 #address-cells = <1>;
83 #interrupt-cells = <2>;
84 interrupt-controller;
85 interrupt-parent = <&gpio1>;
86 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
87 pinctrl-0 = <&switch_interrupt_pins>;
88 pinctrl-names = "default";
89 #size-cells = <0>;
90 reg = <0>;
91
92 mdio {
93 #address-cells = <1>;
94 #size-cells = <0>;
95
96 switch0phy1: switch0phy1@1 {
97 reg = <0x1>;
98 };
99
100 switch0phy2: switch0phy2@2 {
101 reg = <0x2>;
102 };
103
104 switch0phy3: switch0phy3@3 {
105 reg = <0x3>;
106 };
107
108 switch0phy4: switch0phy4@4 {
109 reg = <0x4>;
110 };
111
112 switch0phy5: switch0phy5@5 {
113 reg = <0x5>;
114 };
115
116 switch0phy6: switch0phy6@6 {
117 reg = <0x6>;
118 };
119
120 switch0phy7: switch0phy7@7 {
121 reg = <0x7>;
122 };
123
124 switch0phy8: switch0phy8@8 {
125 reg = <0x8>;
126 };
127 };
128
129 mdio-external {
130 compatible = "marvell,mv88e6xxx-mdio-external";
131 #address-cells = <1>;
132 #size-cells = <0>;
133
134 phy1: ethernet-phy@b {
135 reg = <0xb>;
136 compatible = "ethernet-phy-ieee802.3-c45";
137 };
138
139 phy2: ethernet-phy@c {
140 reg = <0xc>;
141 compatible = "ethernet-phy-ieee802.3-c45";
142 };
143 };
144
145 ports {
146 #address-cells = <1>;
147 #size-cells = <0>;
148
149 port@0 {
150 ethernet = <&eth0>;
151 label = "cpu";
152 reg = <0>;
153
154 fixed-link {
155 full-duplex;
156 pause;
157 speed = <1000>;
158 };
159 };
160
161 port@1 {
162 label = "lan1";
163 phy-handle = <&switch0phy1>;
164 reg = <1>;
165 };
166
167 port@2 {
168 label = "lan2";
169 phy-handle = <&switch0phy2>;
170 reg = <2>;
171 };
172
173 port@3 {
174 label = "lan3";
175 phy-handle = <&switch0phy3>;
176 reg = <3>;
177 };
178
179 port@4 {
180 label = "lan4";
181 phy-handle = <&switch0phy4>;
182 reg = <4>;
183 };
184
185 port@5 {
186 label = "lan5";
187 phy-handle = <&switch0phy5>;
188 reg = <5>;
189 };
190
191 port@6 {
192 label = "lan6";
193 phy-handle = <&switch0phy6>;
194 reg = <6>;
195 };
196
197 port@7 {
198 label = "lan7";
199 phy-handle = <&switch0phy7>;
200 reg = <7>;
201 };
202
203 port@8 {
204 label = "lan8";
205 phy-handle = <&switch0phy8>;
206 reg = <8>;
207 };
208
209 port@9 {
210 /* 88X3310P external phy */
211 label = "lan9";
212 phy-handle = <&phy1>;
213 phy-mode = "xaui";
214 reg = <9>;
215 };
216
217 port@a {
218 /* 88X3310P external phy */
219 label = "lan10";
220 phy-handle = <&phy2>;
221 phy-mode = "xaui";
222 reg = <0xa>;
223 };
224 };
225 };
226};
227
228&pinctrl {
229 front_button_pins: front-button-pins {
230 marvell,pins = "mpp38";
231 marvell,function = "gpio";
232 };
233
234 switch_interrupt_pins: switch-interrupt-pins {
235 marvell,pins = "mpp39";
236 marvell,function = "gpio";
237 };
238};
239
240&spi0 {
241 pinctrl-0 = <&spi0_pins>;
242 pinctrl-names = "default";
243 status = "okay";
244
245 spi-flash@0 {
246 #address-cells = <1>;
247 #size-cells = <1>;
248 compatible = "jedec,spi-nor";
249 reg = <0>; /* Chip select 0 */
250 spi-max-frequency = <3000000>;
251
252 partitions {
253 compatible = "fixed-partitions";
254 #address-cells = <1>;
255 #size-cells = <1>;
256
257 partition@0 {
258 label = "boot";
259 read-only;
260 reg = <0x00000000 0x00100000>;
261 };
262
263 partition@100000 {
264 label = "env";
265 reg = <0x00100000 0x00010000>;
266 };
267
268 partition@200000 {
269 label = "rsv";
270 reg = <0x00110000 0x00010000>;
271 };
272
273 partition@300000 {
274 label = "image0";
275 reg = <0x00120000 0x00900000>;
276 };
277
278 partition@400000 {
279 label = "config";
280 reg = <0x00a20000 0x00300000>;
281 };
282
283 partition@480000 {
284 label = "debug";
285 reg = <0x00d20000 0x002e0000>;
286 };
287 };
288 };
289};
290
291&uart0 {
292 pinctrl-0 = <&uart0_pins>;
293 pinctrl-names = "default";
294 status = "okay";
295};
arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts+5−0
@@ -159,6 +159,11 @@ · 158 unmodified lines
159//24LC128 EEPROM159//24LC128 EEPROM
160&i2c3 {160&i2c3 {
161 status = "okay";161 status = "okay";
162 eeprom@50 {
163 compatible = "atmel,24c256";
164 reg = <0x50>;
165 pagesize = <64>;
166 };
162};167};
163 168
164//P0 Power regulators169//P0 Power regulators
arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts+20−1
@@ -86,6 +86,18 @@ · 85 unmodified lines
86 linux,code = <ASPEED_GPIO(J, 1)>;86 linux,code = <ASPEED_GPIO(J, 1)>;
87 };87 };
88 88
89 S0_scp_auth_fail {
90 label = "S0_SCP_AUTH_FAIL";
91 gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
92 linux,code = <ASPEED_GPIO(J, 2)>;
93 };
94
95 S1_scp_auth_fail {
96 label = "S1_SCP_AUTH_FAIL";
97 gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>;
98 linux,code = <ASPEED_GPIO(Z, 5)>;
99 };
100
89 S1_overtemp {101 S1_overtemp {
90 label = "S1_OVERTEMP";102 label = "S1_OVERTEMP";
91 gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;103 gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
@@ -590,7 +602,7 @@ · 498 unmodified lines
590 /*Q0-Q7*/ "","","","","","UID_BUTTON","","",602 /*Q0-Q7*/ "","","","","","UID_BUTTON","","",
591 /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",603 /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
592 "OCP_MAIN_PWREN","RESET_BUTTON","","",604 "OCP_MAIN_PWREN","RESET_BUTTON","","",
593 /*S0-S7*/ "","","","","","","","",605 /*S0-S7*/ "","","","","RTC_BAT_SEN_EN","","","",
594 /*T0-T7*/ "","","","","","","","",606 /*T0-T7*/ "","","","","","","","",
595 /*U0-U7*/ "","","","","","","","",607 /*U0-U7*/ "","","","","","","","",
596 /*V0-V7*/ "","","","","","","","",608 /*V0-V7*/ "","","","","","","","",
@@ -604,4 +616,11 @@ · 7 unmodified lines
604 "S1_BMC_DDR_ADR","","","","",616 "S1_BMC_DDR_ADR","","","","",
605 /*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",617 /*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
606 "BMC_OCP_PG";618 "BMC_OCP_PG";
619
620 i2c4_o_en {
621 gpio-hog;
622 gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
623 output-high;
624 line-name = "BMC_I2C4_O_EN";
625 };
607};626};
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts+223−660
@@ -96,6 +96,20 @@ · 95 unmodified lines
96 i2c32 = &i2c14mux1chn1;96 i2c32 = &i2c14mux1chn1;
97 i2c33 = &i2c14mux1chn2;97 i2c33 = &i2c14mux1chn2;
98 i2c34 = &i2c14mux1chn3;98 i2c34 = &i2c14mux1chn3;
99 i2c35 = &i2c15mux0chn0;
100 i2c36 = &i2c15mux0chn1;
101 i2c37 = &i2c15mux0chn2;
102 i2c38 = &i2c15mux0chn3;
103 i2c39 = &i2c15mux1chn0;
104 i2c40 = &i2c15mux1chn1;
105 i2c41 = &i2c15mux1chn2;
106 i2c42 = &i2c15mux1chn3;
107 i2c43 = &i2c15mux2chn0;
108 i2c44 = &i2c15mux2chn1;
109 i2c45 = &i2c15mux2chn2;
110 i2c46 = &i2c15mux2chn3;
111 i2c47 = &i2c8mux0chn0;
112 i2c48 = &i2c8mux0chn1;
99 113
100 serial4 = &uart5;114 serial4 = &uart5;
101 115
@@ -231,20 +245,36 @@ · 129 unmodified lines
231 gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;245 gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
232 };246 };
233 };247 };
248
249 iio-hwmon-battery {
250 compatible = "iio-hwmon";
251 io-channels = <&adc1 7>;
252 };
253};
254
255&adc1 {
256 status = "okay";
257 aspeed,int-vref-microvolt = <2500000>;
258 pinctrl-names = "default";
259 pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
260 &pinctrl_adc10_default &pinctrl_adc11_default
261 &pinctrl_adc12_default &pinctrl_adc13_default
262 &pinctrl_adc14_default &pinctrl_adc15_default>;
234};263};
235 264
236&gpio0 {265&gpio0 {
237 gpio-line-names =266 gpio-line-names =
238 /*A0-A7*/ "","","","","","","","",267 /*A0-A7*/ "","","","","","","","",
239 /*B0-B7*/ "USERSPACE_RSTIND_BUFF","","","","","","","",268 /*B0-B7*/ "USERSPACE_RSTIND_BUFF","","","","","","checkstop","",
240 /*C0-C7*/ "","","","","","","","",269 /*C0-C7*/ "","","","","","","","",
241 /*D0-D7*/ "","","","","","","","",270 /*D0-D7*/ "","","","","","","","",
242 /*E0-E7*/ "","","","","","","","",271 /*E0-E7*/ "","","","","","","","",
243 /*F0-F7*/ "PIN_HOLE_RESET_IN_N","","",272 /*F0-F7*/ "PIN_HOLE_RESET_IN_N","","",
244 "PIN_HOLE_RESET_OUT_N","","","","",273 "PIN_HOLE_RESET_OUT_N","","",
274 "factory-reset-toggle","",
245 /*G0-G7*/ "","","","","","","","",275 /*G0-G7*/ "","","","","","","","",
246 /*H0-H7*/ "led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",276 /*H0-H7*/ "led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
247 /*I0-I7*/ "","","","","","","","",277 /*I0-I7*/ "","","","","","","bmc-secure-boot","",
248 /*J0-J7*/ "","","","","","","","",278 /*J0-J7*/ "","","","","","","","",
249 /*K0-K7*/ "","","","","","","","",279 /*K0-K7*/ "","","","","","","","",
250 /*L0-L7*/ "","","","","","","","",280 /*L0-L7*/ "","","","","","","","",
@@ -252,7 +282,7 @@ · 1 unmodified line
252 /*N0-N7*/ "","","","","","","","",282 /*N0-N7*/ "","","","","","","","",
253 /*O0-O7*/ "","","","","","","","",283 /*O0-O7*/ "","","","","","","","",
254 /*P0-P7*/ "","","","","led-pcieslot-power","","","",284 /*P0-P7*/ "","","","","led-pcieslot-power","","","",
255 /*Q0-Q7*/ "","","","","","","","",285 /*Q0-Q7*/ "","","regulator-standby-faulted","","","","","",
256 /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",286 /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
257 /*S0-S7*/ "","","","","","","","",287 /*S0-S7*/ "","","","","","","","",
258 /*T0-T7*/ "","","","","","","","",288 /*T0-T7*/ "","","","","","","","",
@@ -297,86 +327,6 @@ · 38 unmodified lines
297 "presence-lcd-op",327 "presence-lcd-op",
298 "presence-base-op",328 "presence-base-op",
299 "";329 "";
300
301 gpio@0 {
302 reg = <0>;
303 type = <PCA955X_TYPE_GPIO>;
304 };
305
306 gpio@1 {
307 reg = <1>;
308 type = <PCA955X_TYPE_GPIO>;
309 };
310
311 gpio@2 {
312 reg = <2>;
313 type = <PCA955X_TYPE_GPIO>;
314 };
315
316 gpio@3 {
317 reg = <3>;
318 type = <PCA955X_TYPE_GPIO>;
319 };
320
321 gpio@4 {
322 reg = <4>;
323 type = <PCA955X_TYPE_GPIO>;
324 };
325
326 gpio@5 {
327 reg = <5>;
328 type = <PCA955X_TYPE_GPIO>;
329 };
330
331 gpio@6 {
332 reg = <6>;
333 type = <PCA955X_TYPE_GPIO>;
334 };
335
336 gpio@7 {
337 reg = <7>;
338 type = <PCA955X_TYPE_GPIO>;
339 };
340
341 gpio@8 {
342 reg = <8>;
343 type = <PCA955X_TYPE_GPIO>;
344 };
345
346 gpio@9 {
347 reg = <9>;
348 type = <PCA955X_TYPE_GPIO>;
349 };
350
351 gpio@10 {
352 reg = <10>;
353 type = <PCA955X_TYPE_GPIO>;
354 };
355
356 gpio@11 {
357 reg = <11>;
358 type = <PCA955X_TYPE_GPIO>;
359 };
360
361 gpio@12 {
362 reg = <12>;
363 type = <PCA955X_TYPE_GPIO>;
364 };
365
366 gpio@13 {
367 reg = <13>;
368 type = <PCA955X_TYPE_GPIO>;
369 };
370
371 gpio@14 {
372 reg = <14>;
373 type = <PCA955X_TYPE_GPIO>;
374 };
375
376 gpio@15 {
377 reg = <15>;
378 type = <PCA955X_TYPE_GPIO>;
379 };
380 };330 };
381};331};
382 332
@@ -440,56 +390,6 @@ · 57 unmodified lines
440 "expander-cable-card3",390 "expander-cable-card3",
441 "expander-cable-card4",391 "expander-cable-card4",
442 "expander-cable-card5";392 "expander-cable-card5";
443
444 gpio@0 {
445 reg = <0>;
446 type = <PCA955X_TYPE_GPIO>;
447 };
448
449 gpio@1 {
450 reg = <1>;
451 type = <PCA955X_TYPE_GPIO>;
452 };
453
454 gpio@2 {
455 reg = <2>;
456 type = <PCA955X_TYPE_GPIO>;
457 };
458
459 gpio@3 {
460 reg = <3>;
461 type = <PCA955X_TYPE_GPIO>;
462 };
463
464 gpio@4 {
465 reg = <4>;
466 type = <PCA955X_TYPE_GPIO>;
467 };
468
469 gpio@5 {
470 reg = <5>;
471 type = <PCA955X_TYPE_GPIO>;
472 };
473
474 gpio@6 {
475 reg = <6>;
476 type = <PCA955X_TYPE_GPIO>;
477 };
478
479 gpio@7 {
480 reg = <7>;
481 type = <PCA955X_TYPE_GPIO>;
482 };
483
484 gpio@8 {
485 reg = <8>;
486 type = <PCA955X_TYPE_GPIO>;
487 };
488
489 gpio@9 {
490 reg = <9>;
491 type = <PCA955X_TYPE_GPIO>;
492 };
493 };393 };
494 394
495 i2c-switch@70 {395 i2c-switch@70 {
@@ -533,36 +433,6 @@ · 37 unmodified lines
533 default-state = "keep";433 default-state = "keep";
534 type = <PCA955X_TYPE_LED>;434 type = <PCA955X_TYPE_LED>;
535 };435 };
536
537 gpio@2 {
538 reg = <2>;
539 type = <PCA955X_TYPE_GPIO>;
540 };
541
542 gpio@3 {
543 reg = <3>;
544 type = <PCA955X_TYPE_GPIO>;
545 };
546
547 gpio@4 {
548 reg = <4>;
549 type = <PCA955X_TYPE_GPIO>;
550 };
551
552 gpio@5 {
553 reg = <5>;
554 type = <PCA955X_TYPE_GPIO>;
555 };
556
557 gpio@6 {
558 reg = <6>;
559 type = <PCA955X_TYPE_GPIO>;
560 };
561
562 gpio@7 {
563 reg = <7>;
564 type = <PCA955X_TYPE_GPIO>;
565 };
566 };436 };
567 };437 };
568 438
@@ -599,36 +469,6 @@ · 30 unmodified lines
599 default-state = "keep";469 default-state = "keep";
600 type = <PCA955X_TYPE_LED>;470 type = <PCA955X_TYPE_LED>;
601 };471 };
602
603 gpio@2 {
604 reg = <2>;
605 type = <PCA955X_TYPE_GPIO>;
606 };
607
608 gpio@3 {
609 reg = <3>;
610 type = <PCA955X_TYPE_GPIO>;
611 };
612
613 gpio@4 {
614 reg = <4>;
615 type = <PCA955X_TYPE_GPIO>;
616 };
617
618 gpio@5 {
619 reg = <5>;
620 type = <PCA955X_TYPE_GPIO>;
621 };
622
623 gpio@6 {
624 reg = <6>;
625 type = <PCA955X_TYPE_GPIO>;
626 };
627
628 gpio@7 {
629 reg = <7>;
630 type = <PCA955X_TYPE_GPIO>;
631 };
632 };472 };
633 };473 };
634 474
@@ -665,36 +505,6 @@ · 30 unmodified lines
665 default-state = "keep";505 default-state = "keep";
666 type = <PCA955X_TYPE_LED>;506 type = <PCA955X_TYPE_LED>;
667 };507 };
668
669 gpio@2 {
670 reg = <2>;
671 type = <PCA955X_TYPE_GPIO>;
672 };
673
674 gpio@3 {
675 reg = <3>;
676 type = <PCA955X_TYPE_GPIO>;
677 };
678
679 gpio@4 {
680 reg = <4>;
681 type = <PCA955X_TYPE_GPIO>;
682 };
683
684 gpio@5 {
685 reg = <5>;
686 type = <PCA955X_TYPE_GPIO>;
687 };
688
689 gpio@6 {
690 reg = <6>;
691 type = <PCA955X_TYPE_GPIO>;
692 };
693
694 gpio@7 {
695 reg = <7>;
696 type = <PCA955X_TYPE_GPIO>;
697 };
698 };508 };
699 };509 };
700 };510 };
@@ -725,67 +535,6 @@ · 24 unmodified lines
725 "expander-cable-card9",535 "expander-cable-card9",
726 "expander-cable-card10",536 "expander-cable-card10",
727 "expander-cable-card11";537 "expander-cable-card11";
728
729 gpio@0 {
730 reg = <0>;
731 type = <PCA955X_TYPE_GPIO>;
732 };
733
734 gpio@1 {
735 reg = <1>;
736 type = <PCA955X_TYPE_GPIO>;
737 };
738
739 gpio@2 {
740 reg = <2>;
741 type = <PCA955X_TYPE_GPIO>;
742 };
743
744 gpio@3 {
745 reg = <3>;
746 type = <PCA955X_TYPE_GPIO>;
747 };
748
749 gpio@4 {
750 reg = <4>;
751 type = <PCA955X_TYPE_GPIO>;
752 };
753
754 gpio@5 {
755 reg = <5>;
756 type = <PCA955X_TYPE_GPIO>;
757 };
758
759 gpio@6 {
760 reg = <6>;
761 type = <PCA955X_TYPE_GPIO>;
762 };
763
764 gpio@7 {
765 reg = <7>;
766 type = <PCA955X_TYPE_GPIO>;
767 };
768
769 gpio@8 {
770 reg = <8>;
771 type = <PCA955X_TYPE_GPIO>;
772 };
773
774 gpio@9 {
775 reg = <9>;
776 type = <PCA955X_TYPE_GPIO>;
777 };
778
779 gpio@10 {
780 reg = <10>;
781 type = <PCA955X_TYPE_GPIO>;
782 };
783
784 gpio@11 {
785 reg = <11>;
786 type = <PCA955X_TYPE_GPIO>;
787 };
788
789 };538 };
790 539
791 i2c-switch@70 {540 i2c-switch@70 {
@@ -829,36 +578,6 @@ · 37 unmodified lines
829 default-state = "keep";578 default-state = "keep";
830 type = <PCA955X_TYPE_LED>;579 type = <PCA955X_TYPE_LED>;
831 };580 };
832
833 gpio@2 {
834 reg = <2>;
835 type = <PCA955X_TYPE_GPIO>;
836 };
837
838 gpio@3 {
839 reg = <3>;
840 type = <PCA955X_TYPE_GPIO>;
841 };
842
843 gpio@4 {
844 reg = <4>;
845 type = <PCA955X_TYPE_GPIO>;
846 };
847
848 gpio@5 {
849 reg = <5>;
850 type = <PCA955X_TYPE_GPIO>;
851 };
852
853 gpio@6 {
854 reg = <6>;
855 type = <PCA955X_TYPE_GPIO>;
856 };
857
858 gpio@7 {
859 reg = <7>;
860 type = <PCA955X_TYPE_GPIO>;
861 };
862 };581 };
863 };582 };
864 583
@@ -895,36 +614,6 @@ · 30 unmodified lines
895 default-state = "keep";614 default-state = "keep";
896 type = <PCA955X_TYPE_LED>;615 type = <PCA955X_TYPE_LED>;
897 };616 };
898
899 gpio@2 {
900 reg = <2>;
901 type = <PCA955X_TYPE_GPIO>;
902 };
903
904 gpio@3 {
905 reg = <3>;
906 type = <PCA955X_TYPE_GPIO>;
907 };
908
909 gpio@4 {
910 reg = <4>;
911 type = <PCA955X_TYPE_GPIO>;
912 };
913
914 gpio@5 {
915 reg = <5>;
916 type = <PCA955X_TYPE_GPIO>;
917 };
918
919 gpio@6 {
920 reg = <6>;
921 type = <PCA955X_TYPE_GPIO>;
922 };
923
924 gpio@7 {
925 reg = <7>;
926 type = <PCA955X_TYPE_GPIO>;
927 };
928 };617 };
929 };618 };
930 619
@@ -961,36 +650,6 @@ · 30 unmodified lines
961 default-state = "keep";650 default-state = "keep";
962 type = <PCA955X_TYPE_LED>;651 type = <PCA955X_TYPE_LED>;
963 };652 };
964
965 gpio@2 {
966 reg = <2>;
967 type = <PCA955X_TYPE_GPIO>;
968 };
969
970 gpio@3 {
971 reg = <3>;
972 type = <PCA955X_TYPE_GPIO>;
973 };
974
975 gpio@4 {
976 reg = <4>;
977 type = <PCA955X_TYPE_GPIO>;
978 };
979
980 gpio@5 {
981 reg = <5>;
982 type = <PCA955X_TYPE_GPIO>;
983 };
984
985 gpio@6 {
986 reg = <6>;
987 type = <PCA955X_TYPE_GPIO>;
988 };
989
990 gpio@7 {
991 reg = <7>;
992 type = <PCA955X_TYPE_GPIO>;
993 };
994 };653 };
995 };654 };
996 655
@@ -1027,36 +686,6 @@ · 30 unmodified lines
1027 default-state = "keep";686 default-state = "keep";
1028 type = <PCA955X_TYPE_LED>;687 type = <PCA955X_TYPE_LED>;
1029 };688 };
1030
1031 gpio@2 {
1032 reg = <2>;
1033 type = <PCA955X_TYPE_GPIO>;
1034 };
1035
1036 gpio@3 {
1037 reg = <3>;
1038 type = <PCA955X_TYPE_GPIO>;
1039 };
1040
1041 gpio@4 {
1042 reg = <4>;
1043 type = <PCA955X_TYPE_GPIO>;
1044 };
1045
1046 gpio@5 {
1047 reg = <5>;
1048 type = <PCA955X_TYPE_GPIO>;
1049 };
1050
1051 gpio@6 {
1052 reg = <6>;
1053 type = <PCA955X_TYPE_GPIO>;
1054 };
1055
1056 gpio@7 {
1057 reg = <7>;
1058 type = <PCA955X_TYPE_GPIO>;
1059 };
1060 };689 };
1061 };690 };
1062 };691 };
@@ -1106,36 +735,6 @@ · 43 unmodified lines
1106 default-state = "keep";735 default-state = "keep";
1107 type = <PCA955X_TYPE_LED>;736 type = <PCA955X_TYPE_LED>;
1108 };737 };
1109
1110 gpio@2 {
1111 reg = <2>;
1112 type = <PCA955X_TYPE_GPIO>;
1113 };
1114
1115 gpio@3 {
1116 reg = <3>;
1117 type = <PCA955X_TYPE_GPIO>;
1118 };
1119
1120 gpio@4 {
1121 reg = <4>;
1122 type = <PCA955X_TYPE_GPIO>;
1123 };
1124
1125 gpio@5 {
1126 reg = <5>;
1127 type = <PCA955X_TYPE_GPIO>;
1128 };
1129
1130 gpio@6 {
1131 reg = <6>;
1132 type = <PCA955X_TYPE_GPIO>;
1133 };
1134
1135 gpio@7 {
1136 reg = <7>;
1137 type = <PCA955X_TYPE_GPIO>;
1138 };
1139 };738 };
1140 };739 };
1141 740
@@ -1172,36 +771,6 @@ · 30 unmodified lines
1172 default-state = "keep";771 default-state = "keep";
1173 type = <PCA955X_TYPE_LED>;772 type = <PCA955X_TYPE_LED>;
1174 };773 };
1175
1176 gpio@2 {
1177 reg = <2>;
1178 type = <PCA955X_TYPE_GPIO>;
1179 };
1180
1181 gpio@3 {
1182 reg = <3>;
1183 type = <PCA955X_TYPE_GPIO>;
1184 };
1185
1186 gpio@4 {
1187 reg = <4>;
1188 type = <PCA955X_TYPE_GPIO>;
1189 };
1190
1191 gpio@5 {
1192 reg = <5>;
1193 type = <PCA955X_TYPE_GPIO>;
1194 };
1195
1196 gpio@6 {
1197 reg = <6>;
1198 type = <PCA955X_TYPE_GPIO>;
1199 };
1200
1201 gpio@7 {
1202 reg = <7>;
1203 type = <PCA955X_TYPE_GPIO>;
1204 };
1205 };774 };
1206 };775 };
1207 776
@@ -1233,40 +802,10 @@ · 25 unmodified lines
1233 802
1234 led@1 {803 led@1 {
1235 label = "cablecard-c10-cxp-bot";804 label = "cablecard-c10-cxp-bot";
1236 reg = <1>;805 reg = <1>;
1237 retain-state-shutdown;806 retain-state-shutdown;
1238 default-state = "keep";807 default-state = "keep";
1239 type = <PCA955X_TYPE_LED>;808 type = <PCA955X_TYPE_LED>;
1240 };
1241
1242 gpio@2 {
1243 reg = <2>;
1244 type = <PCA955X_TYPE_GPIO>;
1245 };
1246
1247 gpio@3 {
1248 reg = <3>;
1249 type = <PCA955X_TYPE_GPIO>;
1250 };
1251
1252 gpio@4 {
1253 reg = <4>;
1254 type = <PCA955X_TYPE_GPIO>;
1255 };
1256
1257 gpio@5 {
1258 reg = <5>;
1259 type = <PCA955X_TYPE_GPIO>;
1260 };
1261
1262 gpio@6 {
1263 reg = <6>;
1264 type = <PCA955X_TYPE_GPIO>;
1265 };
1266
1267 gpio@7 {
1268 reg = <7>;
1269 type = <PCA955X_TYPE_GPIO>;
1270 };809 };
1271 };810 };
1272 };811 };
@@ -1304,36 +843,6 @@ · 31 unmodified lines
1304 default-state = "keep";843 default-state = "keep";
1305 type = <PCA955X_TYPE_LED>;844 type = <PCA955X_TYPE_LED>;
1306 };845 };
1307
1308 gpio@2 {
1309 reg = <2>;
1310 type = <PCA955X_TYPE_GPIO>;
1311 };
1312
1313 gpio@3 {
1314 reg = <3>;
1315 type = <PCA955X_TYPE_GPIO>;
1316 };
1317
1318 gpio@4 {
1319 reg = <4>;
1320 type = <PCA955X_TYPE_GPIO>;
1321 };
1322
1323 gpio@5 {
1324 reg = <5>;
1325 type = <PCA955X_TYPE_GPIO>;
1326 };
1327
1328 gpio@6 {
1329 reg = <6>;
1330 type = <PCA955X_TYPE_GPIO>;
1331 };
1332
1333 gpio@7 {
1334 reg = <7>;
1335 type = <PCA955X_TYPE_GPIO>;
1336 };
1337 };846 };
1338 };847 };
1339 };848 };
@@ -1347,11 +856,6 @@ · 7 unmodified lines
1347 gpio-controller;856 gpio-controller;
1348 #gpio-cells = <2>;857 #gpio-cells = <2>;
1349 858
1350 gpio@0 {
1351 reg = <0>;
1352 type = <PCA955X_TYPE_GPIO>;
1353 };
1354
1355 led@1 {859 led@1 {
1356 label = "pcieslot-c01";860 label = "pcieslot-c01";
1357 reg = <1>;861 reg = <1>;
@@ -1439,26 +943,6 @@ · 81 unmodified lines
1439 default-state = "keep";943 default-state = "keep";
1440 type = <PCA955X_TYPE_LED>;944 type = <PCA955X_TYPE_LED>;
1441 };945 };
1442
1443 gpio@12 {
1444 reg = <12>;
1445 type = <PCA955X_TYPE_GPIO>;
1446 };
1447
1448 gpio@13 {
1449 reg = <13>;
1450 type = <PCA955X_TYPE_GPIO>;
1451 };
1452
1453 gpio@14 {
1454 reg = <14>;
1455 type = <PCA955X_TYPE_GPIO>;
1456 };
1457
1458 gpio@15 {
1459 reg = <15>;
1460 type = <PCA955X_TYPE_GPIO>;
1461 };
1462 };946 };
1463};947};
1464 948
@@ -2082,11 +1566,6 @@ · 617 unmodified lines
2082 type = <PCA955X_TYPE_LED>;1566 type = <PCA955X_TYPE_LED>;
2083 };1567 };
2084 1568
2085 gpio@7 {
2086 reg = <7>;
2087 type = <PCA955X_TYPE_GPIO>;
2088 };
2089
2090 led@8 {1569 led@8 {
2091 label = "vrm4";1570 label = "vrm4";
2092 reg = <8>;1571 reg = <8>;
@@ -2217,11 +1696,6 @@ · 124 unmodified lines
2217 type = <PCA955X_TYPE_LED>;1696 type = <PCA955X_TYPE_LED>;
2218 };1697 };
2219 1698
2220 gpio@7 {
2221 reg = <7>;
2222 type = <PCA955X_TYPE_GPIO>;
2223 };
2224
2225 led@8 {1699 led@8 {
2226 label = "vrm0";1700 label = "vrm0";
2227 reg = <8>;1701 reg = <8>;
@@ -2310,6 +1784,27 @@ · 82 unmodified lines
2310 compatible = "atmel,24c128";1784 compatible = "atmel,24c128";
2311 reg = <0x50>;1785 reg = <0x50>;
2312 };1786 };
1787
1788 i2c-switch@70 {
1789 compatible = "nxp,pca9546";
1790 reg = <0x70>;
1791 #address-cells = <1>;
1792 #size-cells = <0>;
1793 status = "okay";
1794 i2c-mux-idle-disconnect;
1795
1796 i2c8mux0chn0: i2c@0 {
1797 #address-cells = <1>;
1798 #size-cells = <0>;
1799 reg = <0>;
1800 };
1801
1802 i2c8mux0chn1: i2c@1 {
1803 #address-cells = <1>;
1804 #size-cells = <0>;
1805 reg = <1>;
1806 };
1807 };
2313};1808};
2314 1809
2315&i2c9 {1810&i2c9 {
@@ -2413,15 +1908,21 @@ · 97 unmodified lines
2413};1908};
2414 1909
2415&i2c14 {1910&i2c14 {
1911 multi-master;
2416 status = "okay";1912 status = "okay";
2417 1913
1914 ibm-panel@62 {
1915 compatible = "ibm,op-panel";
1916 reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
1917 };
1918
2418 i2c-switch@70 {1919 i2c-switch@70 {
2419 compatible = "nxp,pca9546";1920 compatible = "nxp,pca9546";
2420 reg = <0x70>;1921 reg = <0x70>;
2421 #address-cells = <1>;1922 #address-cells = <1>;
2422 #size-cells = <0>;1923 #size-cells = <0>;
2423 status = "okay";1924 status = "okay";
2424 i2c-mux-idle-disconnect;1925 idle-state = <1>;
2425 1926
2426 i2c14mux0chn0: i2c@0 {1927 i2c14mux0chn0: i2c@0 {
2427 #address-cells = <1>;1928 #address-cells = <1>;
@@ -2651,16 +2152,6 @@ · 223 unmodified lines
2651 default-state = "keep";2152 default-state = "keep";
2652 type = <PCA955X_TYPE_LED>;2153 type = <PCA955X_TYPE_LED>;
2653 };2154 };
2654
2655 gpio@14 {
2656 reg = <14>;
2657 type = <PCA955X_TYPE_GPIO>;
2658 };
2659
2660 gpio@15 {
2661 reg = <15>;
2662 type = <PCA955X_TYPE_GPIO>;
2663 };
2664 };2155 };
2665 2156
2666 pca0: pca9552@61 {2157 pca0: pca9552@61 {
@@ -2680,86 +2171,6 @@ · 13 unmodified lines
2680 "presence-fan2",2171 "presence-fan2",
2681 "presence-fan1",2172 "presence-fan1",
2682 "presence-fan0";2173 "presence-fan0";
2683
2684 gpio@0 {
2685 reg = <0>;
2686 type = <PCA955X_TYPE_GPIO>;
2687 };
2688
2689 gpio@1 {
2690 reg = <1>;
2691 type = <PCA955X_TYPE_GPIO>;
2692 };
2693
2694 gpio@2 {
2695 reg = <2>;
2696 type = <PCA955X_TYPE_GPIO>;
2697 };
2698
2699 gpio@3 {
2700 reg = <3>;
2701 type = <PCA955X_TYPE_GPIO>;
2702 };
2703
2704 gpio@4 {
2705 reg = <4>;
2706 type = <PCA955X_TYPE_GPIO>;
2707 };
2708
2709 gpio@5 {
2710 reg = <5>;
2711 type = <PCA955X_TYPE_GPIO>;
2712 };
2713
2714 gpio@6 {
2715 reg = <6>;
2716 type = <PCA955X_TYPE_GPIO>;
2717 };
2718
2719 gpio@7 {
2720 reg = <7>;
2721 type = <PCA955X_TYPE_GPIO>;
2722 };
2723
2724 gpio@8 {
2725 reg = <8>;
2726 type = <PCA955X_TYPE_GPIO>;
2727 };
2728
2729 gpio@9 {
2730 reg = <9>;
2731 type = <PCA955X_TYPE_GPIO>;
2732 };
2733
2734 gpio@10 {
2735 reg = <10>;
2736 type = <PCA955X_TYPE_GPIO>;
2737 };
2738
2739 gpio@11 {
2740 reg = <11>;
2741 type = <PCA955X_TYPE_GPIO>;
2742 };
2743
2744 gpio@12 {
2745 reg = <12>;
2746 type = <PCA955X_TYPE_GPIO>;
2747 };
2748
2749 gpio@13 {
2750 reg = <13>;
2751 type = <PCA955X_TYPE_GPIO>;
2752 };
2753
2754 gpio@14 {
2755 reg = <14>;
2756 type = <PCA955X_TYPE_GPIO>;
2757 };
2758
2759 gpio@15 {
2760 reg = <15>;
2761 type = <PCA955X_TYPE_GPIO>;
2762 };
2763 };2174 };
2764 };2175 };
2765 };2176 };
@@ -2816,6 +2227,152 @@ · 50 unmodified lines
2816 2227
2817&i2c15 {2228&i2c15 {
2818 status = "okay";2229 status = "okay";
2230
2231 i2c-switch@70 {
2232 compatible = "nxp,pca9546";
2233 reg = <0x70>;
2234 #address-cells = <1>;
2235 #size-cells = <0>;
2236 i2c-mux-idle-disconnect;
2237
2238 i2c15mux0chn0: i2c@0 {
2239 #address-cells = <1>;
2240 #size-cells = <0>;
2241 reg = <0>;
2242
2243 eeprom@53 {
2244 compatible = "atmel,24c64";
2245 reg = <0x53>;
2246 };
2247 };
2248
2249 i2c15mux0chn1: i2c@1 {
2250 #address-cells = <1>;
2251 #size-cells = <0>;
2252 reg = <1>;
2253
2254 eeprom@53 {
2255 compatible = "atmel,24c64";
2256 reg = <0x53>;
2257 };
2258 };
2259
2260 i2c15mux0chn2: i2c@2 {
2261 #address-cells = <1>;
2262 #size-cells = <0>;
2263 reg = <2>;
2264
2265 eeprom@53 {
2266 compatible = "atmel,24c64";
2267 reg = <0x53>;
2268 };
2269 };
2270
2271 i2c15mux0chn3: i2c@3 {
2272 #address-cells = <1>;
2273 #size-cells = <0>;
2274 reg = <3>;
2275
2276 eeprom@53 {
2277 compatible = "atmel,24c64";
2278 reg = <0x53>;
2279 };
2280 };
2281 };
2282
2283 i2c-switch@71 {
2284 compatible = "nxp,pca9546";
2285 reg = <0x71>;
2286 #address-cells = <1>;
2287 #size-cells = <0>;
2288 i2c-mux-idle-disconnect;
2289
2290 i2c15mux1chn0: i2c@0 {
2291 #address-cells = <1>;
2292 #size-cells = <0>;
2293 reg = <0>;
2294
2295 eeprom@53 {
2296 compatible = "atmel,24c64";
2297 reg = <0x53>;
2298 };
2299 };
2300
2301 i2c15mux1chn1: i2c@1 {
2302 #address-cells = <1>;
2303 #size-cells = <0>;
2304 reg = <1>;
2305
2306 eeprom@53 {
2307 compatible = "atmel,24c64";
2308 reg = <0x53>;
2309 };
2310 };
2311
2312 i2c15mux1chn2: i2c@2 {
2313 #address-cells = <1>;
2314 #size-cells = <0>;
2315 reg = <2>;
2316
2317 eeprom@53 {
2318 compatible = "atmel,24c64";
2319 reg = <0x53>;
2320 };
2321 };
2322
2323 i2c15mux1chn3: i2c@3 {
2324 #address-cells = <1>;
2325 #size-cells = <0>;
2326 reg = <3>;
2327
2328 eeprom@53 {
2329 compatible = "atmel,24c64";
2330 reg = <0x53>;
2331 };
2332 };
2333 };
2334
2335 i2c-switch@72 {
2336 compatible = "nxp,pca9546";
2337 reg = <0x72>;
2338 #address-cells = <1>;
2339 #size-cells = <0>;
2340 i2c-mux-idle-disconnect;
2341
2342 i2c15mux2chn0: i2c@0 {
2343 #address-cells = <1>;
2344 #size-cells = <0>;
2345 reg = <0>;
2346
2347 eeprom@53 {
2348 compatible = "atmel,24c64";
2349 reg = <0x53>;
2350 };
2351 };
2352
2353 i2c15mux2chn1: i2c@1 {
2354 #address-cells = <1>;
2355 #size-cells = <0>;
2356 reg = <1>;
2357
2358 eeprom@53 {
2359 compatible = "atmel,24c64";
2360 reg = <0x53>;
2361 };
2362 };
2363
2364 i2c15mux2chn2: i2c@2 {
2365 #address-cells = <1>;
2366 #size-cells = <0>;
2367 reg = <2>;
2368 };
2369
2370 i2c15mux2chn3: i2c@3 {
2371 #address-cells = <1>;
2372 #size-cells = <0>;
2373 reg = <3>;
2374 };
2375 };
2819};2376};
2820 2377
2821&ehci1 {2378&ehci1 {
@@ -4050,11 +3607,6 @@ · 1228 unmodified lines
4050 memory-region = <&flash_memory>;3607 memory-region = <&flash_memory>;
4051};3608};
4052 3609
4053&kcs4 {
4054 compatible = "openbmc,mctp-lpc";
4055 status = "okay";
4056};
4057
4058&mac2 {3610&mac2 {
4059 status = "okay";3611 status = "okay";
4060 pinctrl-names = "default";3612 pinctrl-names = "default";
@@ -4093,3 +3645,14 @@ · 32 unmodified lines
4093 status = "okay";3645 status = "okay";
4094 memory-region = <&vga_memory>;3646 memory-region = <&vga_memory>;
4095};3647};
3648
3649&kcs2 {
3650 status = "okay";
3651 aspeed,lpc-io-reg = <0xca8 0xcac>;
3652};
3653
3654&kcs3 {
3655 status = "okay";
3656 aspeed,lpc-io-reg = <0xca2>;
3657 aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
3658};
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts+956−331
@@ -82,7 +82,7 @@ · 81 unmodified lines
82 82
83 chosen {83 chosen {
84 stdout-path = &uart5;84 stdout-path = &uart5;
85 bootargs = "console=ttyS4,115200n8";85 bootargs = "console=ttyS4,115200n8 earlycon";
86 };86 };
87 87
88 memory@80000000 {88 memory@80000000 {
@@ -116,34 +116,6 @@ · 27 unmodified lines
116 };116 };
117 };117 };
118 118
119 gpio-keys {
120 compatible = "gpio-keys";
121
122 ps0-presence {
123 label = "ps0-presence";
124 gpios = <&gpio0 ASPEED_GPIO(S, 0) GPIO_ACTIVE_LOW>;
125 linux,code = <ASPEED_GPIO(S, 0)>;
126 };
127
128 ps1-presence {
129 label = "ps1-presence";
130 gpios = <&gpio0 ASPEED_GPIO(S, 1) GPIO_ACTIVE_LOW>;
131 linux,code = <ASPEED_GPIO(S, 1)>;
132 };
133
134 ps2-presence {
135 label = "ps2-presence";
136 gpios = <&gpio0 ASPEED_GPIO(S, 2) GPIO_ACTIVE_LOW>;
137 linux,code = <ASPEED_GPIO(S, 2)>;
138 };
139
140 ps3-presence {
141 label = "ps3-presence";
142 gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_LOW>;
143 linux,code = <ASPEED_GPIO(S, 3)>;
144 };
145 };
146
147 i2c2mux: i2cmux {119 i2c2mux: i2cmux {
148 compatible = "i2c-mux-gpio";120 compatible = "i2c-mux-gpio";
149 #address-cells = <1>;121 #address-cells = <1>;
@@ -246,6 +218,21 @@ · 96 unmodified lines
246 linux,code = <11>;218 linux,code = <11>;
247 };219 };
248 };220 };
221
222 iio-hwmon-battery {
223 compatible = "iio-hwmon";
224 io-channels = <&adc1 7>;
225 };
226};
227
228&adc1 {
229 status = "okay";
230 aspeed,int-vref-microvolt = <2500000>;
231 pinctrl-names = "default";
232 pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
233 &pinctrl_adc10_default &pinctrl_adc11_default
234 &pinctrl_adc12_default &pinctrl_adc13_default
235 &pinctrl_adc14_default &pinctrl_adc15_default>;
249};236};
250 237
251&ehci1 {238&ehci1 {
@@ -259,10 +246,10 @@ · 7 unmodified lines
259 /*C0-C7*/ "","","","","","","","",246 /*C0-C7*/ "","","","","","","","",
260 /*D0-D7*/ "","","","","","","","",247 /*D0-D7*/ "","","","","","","","",
261 /*E0-E7*/ "","","","","","","","",248 /*E0-E7*/ "","","","","","","","",
262 /*F0-F7*/ "","","","","","","","",249 /*F0-F7*/ "","","","","","","factory-reset-toggle","",
263 /*G0-G7*/ "","","","","","","","",250 /*G0-G7*/ "","","","","","","","",
264 /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",251 /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
265 /*I0-I7*/ "","","","","","","","",252 /*I0-I7*/ "","","","","","","bmc-secure-boot","",
266 /*J0-J7*/ "","","","","","","","",253 /*J0-J7*/ "","","","","","","","",
267 /*K0-K7*/ "","","","","","","","",254 /*K0-K7*/ "","","","","","","","",
268 /*L0-L7*/ "","","","","","","","",255 /*L0-L7*/ "","","","","","","","",
@@ -270,7 +257,7 @@ · 1 unmodified line
270 /*N0-N7*/ "","","","","","","","",257 /*N0-N7*/ "","","","","","","","",
271 /*O0-O7*/ "","","","usb-power","","","","",258 /*O0-O7*/ "","","","usb-power","","","","",
272 /*P0-P7*/ "","","","","pcieslot-power","","","",259 /*P0-P7*/ "","","","","pcieslot-power","","","",
273 /*Q0-Q7*/ "cfam-reset","","","","","","","",260 /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","",
274 /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",261 /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
275 /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3",262 /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3",
276 "","","","",263 "","","","",
@@ -282,13 +269,6 @@ · 5 unmodified lines
282 /*Y0-Y7*/ "","","","","","","","",269 /*Y0-Y7*/ "","","","","","","","",
283 /*Z0-Z7*/ "","","","","","","","";270 /*Z0-Z7*/ "","","","","","","","";
284 271
285 pin_mclr_vpp {
286 gpio-hog;
287 gpios = <ASPEED_GPIO(P, 7) GPIO_OPEN_DRAIN>;
288 output-high;
289 line-name = "mclr_vpp";
290 };
291
292 i2c3_mux_oe_n {272 i2c3_mux_oe_n {
293 gpio-hog;273 gpio-hog;
294 gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;274 gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
@@ -945,46 +925,6 @@ · 650 unmodified lines
945 "DASD_BP2_PRESENT_N",925 "DASD_BP2_PRESENT_N",
946 "DASD_BP1_PRESENT_N",926 "DASD_BP1_PRESENT_N",
947 "DASD_BP0_PRESENT_N";927 "DASD_BP0_PRESENT_N";
948
949 gpio@0 {
950 reg = <0>;
951 type = <PCA955X_TYPE_GPIO>;
952 };
953
954 gpio@1 {
955 reg = <1>;
956 type = <PCA955X_TYPE_GPIO>;
957 };
958
959 gpio@2 {
960 reg = <2>;
961 type = <PCA955X_TYPE_GPIO>;
962 };
963
964 gpio@3 {
965 reg = <3>;
966 type = <PCA955X_TYPE_GPIO>;
967 };
968
969 gpio@4 {
970 reg = <4>;
971 type = <PCA955X_TYPE_GPIO>;
972 };
973
974 gpio@5 {
975 reg = <5>;
976 type = <PCA955X_TYPE_GPIO>;
977 };
978
979 gpio@6 {
980 reg = <6>;
981 type = <PCA955X_TYPE_GPIO>;
982 };
983
984 gpio@7 {
985 reg = <7>;
986 type = <PCA955X_TYPE_GPIO>;
987 };
988 };928 };
989};929};
990 930
@@ -1025,86 +965,6 @@ · 34 unmodified lines
1025 "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",965 "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
1026 "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",966 "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
1027 "", "", "", "", "", "";967 "", "", "", "", "", "";
1028
1029 gpio@0 {
1030 reg = <0>;
1031 type = <PCA955X_TYPE_GPIO>;
1032 };
1033
1034 gpio@1 {
1035 reg = <1>;
1036 type = <PCA955X_TYPE_GPIO>;
1037 };
1038
1039 gpio@2 {
1040 reg = <2>;
1041 type = <PCA955X_TYPE_GPIO>;
1042 };
1043
1044 gpio@3 {
1045 reg = <3>;
1046 type = <PCA955X_TYPE_GPIO>;
1047 };
1048
1049 gpio@4 {
1050 reg = <4>;
1051 type = <PCA955X_TYPE_GPIO>;
1052 };
1053
1054 gpio@5 {
1055 reg = <5>;
1056 type = <PCA955X_TYPE_GPIO>;
1057 };
1058
1059 gpio@6 {
1060 reg = <6>;
1061 type = <PCA955X_TYPE_GPIO>;
1062 };
1063
1064 gpio@7 {
1065 reg = <7>;
1066 type = <PCA955X_TYPE_GPIO>;
1067 };
1068
1069 gpio@8 {
1070 reg = <8>;
1071 type = <PCA955X_TYPE_GPIO>;
1072 };
1073
1074 gpio@9 {
1075 reg = <9>;
1076 type = <PCA955X_TYPE_GPIO>;
1077 };
1078
1079 gpio@10 {
1080 reg = <10>;
1081 type = <PCA955X_TYPE_GPIO>;
1082 };
1083
1084 gpio@11 {
1085 reg = <11>;
1086 type = <PCA955X_TYPE_GPIO>;
1087 };
1088
1089 gpio@12 {
1090 reg = <12>;
1091 type = <PCA955X_TYPE_GPIO>;
1092 };
1093
1094 gpio@13 {
1095 reg = <13>;
1096 type = <PCA955X_TYPE_GPIO>;
1097 };
1098
1099 gpio@14 {
1100 reg = <14>;
1101 type = <PCA955X_TYPE_GPIO>;
1102 };
1103
1104 gpio@15 {
1105 reg = <15>;
1106 type = <PCA955X_TYPE_GPIO>;
1107 };
1108 };968 };
1109};969};
1110 970
@@ -1126,6 +986,32 @@ · 15 unmodified lines
1126 reg = <0x4a>;986 reg = <0x4a>;
1127 };987 };
1128 988
989 pca9551@60 {
990 compatible = "nxp,pca9551";
991 reg = <0x60>;
992 #address-cells = <1>;
993 #size-cells = <0>;
994
995 gpio-controller;
996 #gpio-cells = <2>;
997
998 led@0 {
999 label = "cablecard0-cxp-top";
1000 reg = <0>;
1001 retain-state-shutdown;
1002 default-state = "keep";
1003 type = <PCA955X_TYPE_LED>;
1004 };
1005
1006 led@1 {
1007 label = "cablecard0-cxp-bot";
1008 reg = <1>;
1009 retain-state-shutdown;
1010 default-state = "keep";
1011 type = <PCA955X_TYPE_LED>;
1012 };
1013 };
1014
1129 pca9546@70 {1015 pca9546@70 {
1130 compatible = "nxp,pca9546";1016 compatible = "nxp,pca9546";
1131 reg = <0x70>;1017 reg = <0x70>;
@@ -1182,6 +1068,58 @@ · 50 unmodified lines
1182 reg = <0x49>;1068 reg = <0x49>;
1183 };1069 };
1184 1070
1071 pca9551@60 {
1072 compatible = "nxp,pca9551";
1073 reg = <0x60>;
1074 #address-cells = <1>;
1075 #size-cells = <0>;
1076
1077 gpio-controller;
1078 #gpio-cells = <2>;
1079
1080 led@0 {
1081 label = "cablecard3-cxp-top";
1082 reg = <0>;
1083 retain-state-shutdown;
1084 default-state = "keep";
1085 type = <PCA955X_TYPE_LED>;
1086 };
1087
1088 led@1 {
1089 label = "cablecard3-cxp-bot";
1090 reg = <1>;
1091 retain-state-shutdown;
1092 default-state = "keep";
1093 type = <PCA955X_TYPE_LED>;
1094 };
1095 };
1096
1097 pca9551@61 {
1098 compatible = "nxp,pca9551";
1099 reg = <0x61>;
1100 #address-cells = <1>;
1101 #size-cells = <0>;
1102
1103 gpio-controller;
1104 #gpio-cells = <2>;
1105
1106 led@0 {
1107 label = "cablecard4-cxp-top";
1108 reg = <0>;
1109 retain-state-shutdown;
1110 default-state = "keep";
1111 type = <PCA955X_TYPE_LED>;
1112 };
1113
1114 led@1 {
1115 label = "cablecard4-cxp-bot";
1116 reg = <1>;
1117 retain-state-shutdown;
1118 default-state = "keep";
1119 type = <PCA955X_TYPE_LED>;
1120 };
1121 };
1122
1185 pca9546@70 {1123 pca9546@70 {
1186 compatible = "nxp,pca9546";1124 compatible = "nxp,pca9546";
1187 reg = <0x70>;1125 reg = <0x70>;
@@ -1290,313 +1228,736 @@ · 102 unmodified lines
1290 multi-master;1228 multi-master;
1291 status = "okay";1229 status = "okay";
1292 1230
1293 si7021-a20@40 {1231 pca9552@30 {
1294 compatible = "silabs,si7020";1232 compatible = "ibm,pca9552";
1295 reg = <0x40>;1233 reg = <0x30>;
1296 };
1297
1298 tmp275@48 {
1299 compatible = "ti,tmp275";
1300 reg = <0x48>;
1301 };
1302
1303 max: max31785@52 {
1304 compatible = "maxim,max31785a";
1305 reg = <0x52>;
1306 #address-cells = <1>;1234 #address-cells = <1>;
1307 #size-cells = <0>;1235 #size-cells = <0>;
1308 1236
1309 fan0: fan@0 {1237 gpio-controller;
1310 compatible = "pmbus-fan";1238 #gpio-cells = <2>;
1239
1240 led@0 {
1241 label = "pcieslot0";
1311 reg = <0>;1242 reg = <0>;
1312 tach-pulses = <2>;1243 retain-state-shutdown;
1244 default-state = "keep";
1245 type = <PCA955X_TYPE_LED>;
1313 };1246 };
1314 1247
1315 fan1: fan@1 {1248 led@1 {
1316 compatible = "pmbus-fan";1249 label = "pcieslot1";
1317 reg = <1>;1250 reg = <1>;
1318 tach-pulses = <2>;1251 retain-state-shutdown;
1252 default-state = "keep";
1253 type = <PCA955X_TYPE_LED>;
1319 };1254 };
1320 1255
1321 fan2: fan@2 {1256 led@2 {
1322 compatible = "pmbus-fan";1257 label = "pcieslot2";
1323 reg = <2>;1258 reg = <2>;
1324 tach-pulses = <2>;1259 retain-state-shutdown;
1260 default-state = "keep";
1261 type = <PCA955X_TYPE_LED>;
1325 };1262 };
1326 1263
1327 fan3: fan@3 {1264 led@3 {
1328 compatible = "pmbus-fan";1265 label = "pcieslot3";
1329 reg = <3>;1266 reg = <3>;
1330 tach-pulses = <2>;1267 retain-state-shutdown;
1268 default-state = "keep";
1269 type = <PCA955X_TYPE_LED>;
1331 };1270 };
1332 1271
1333 fan4: fan@4 {1272 led@4 {
1334 compatible = "pmbus-fan";1273 label = "pcieslot4";
1335 reg = <4>;1274 reg = <4>;
1336 tach-pulses = <2>;1275 retain-state-shutdown;
1276 default-state = "keep";
1277 type = <PCA955X_TYPE_LED>;
1337 };1278 };
1338 1279
1339 fan5: fan@5 {1280 led@5 {
1340 compatible = "pmbus-fan";1281 label = "cpu1";
1341 reg = <5>;1282 reg = <5>;
1342 tach-pulses = <2>;1283 retain-state-shutdown;
1284 default-state = "keep";
1285 type = <PCA955X_TYPE_LED>;
1286 };
1287
1288 led@6 {
1289 label = "cpu-vrm1";
1290 reg = <6>;
1291 retain-state-shutdown;
1292 default-state = "keep";
1293 type = <PCA955X_TYPE_LED>;
1294 };
1295
1296 led@8 {
1297 label = "lcd-russel";
1298 reg = <8>;
1299 retain-state-shutdown;
1300 default-state = "keep";
1301 type = <PCA955X_TYPE_LED>;
1343 };1302 };
1344 };1303 };
1345 1304
1346 pca0: pca9552@61 {1305 pca9552@31 {
1347 compatible = "nxp,pca9552";1306 compatible = "ibm,pca9552";
1348 reg = <0x61>;1307 reg = <0x31>;
1349 #address-cells = <1>;1308 #address-cells = <1>;
1350 #size-cells = <0>;1309 #size-cells = <0>;
1351 1310
1352 gpio-controller;1311 gpio-controller;
1353 #gpio-cells = <2>;1312 #gpio-cells = <2>;
1354 1313
1355 gpio@0 {1314 led@0 {
1315 label = "ddimm0";
1356 reg = <0>;1316 reg = <0>;
1357 type = <PCA955X_TYPE_GPIO>;1317 retain-state-shutdown;
1318 default-state = "keep";
1319 type = <PCA955X_TYPE_LED>;
1358 };1320 };
1359 1321
1360 gpio@1 {1322 led@1 {
1323 label = "ddimm1";
1361 reg = <1>;1324 reg = <1>;
1362 type = <PCA955X_TYPE_GPIO>;1325 retain-state-shutdown;
1326 default-state = "keep";
1327 type = <PCA955X_TYPE_LED>;
1363 };1328 };
1364 1329
1365 gpio@2 {1330 led@2 {
1331 label = "ddimm2";
1366 reg = <2>;1332 reg = <2>;
1367 type = <PCA955X_TYPE_GPIO>;1333 retain-state-shutdown;
1334 default-state = "keep";
1335 type = <PCA955X_TYPE_LED>;
1368 };1336 };
1369 1337
1370 gpio@3 {1338 led@3 {
1339 label = "ddimm3";
1371 reg = <3>;1340 reg = <3>;
1372 type = <PCA955X_TYPE_GPIO>;1341 retain-state-shutdown;
1342 default-state = "keep";
1343 type = <PCA955X_TYPE_LED>;
1373 };1344 };
1374 1345
1375 gpio@4 {1346 led@4 {
1347 label = "ddimm4";
1376 reg = <4>;1348 reg = <4>;
1377 type = <PCA955X_TYPE_GPIO>;1349 retain-state-shutdown;
1350 default-state = "keep";
1351 type = <PCA955X_TYPE_LED>;
1378 };1352 };
1379 1353
1380 gpio@5 {1354 led@5 {
1355 label = "ddimm5";
1381 reg = <5>;1356 reg = <5>;
1382 type = <PCA955X_TYPE_GPIO>;1357 retain-state-shutdown;
1358 default-state = "keep";
1359 type = <PCA955X_TYPE_LED>;
1383 };1360 };
1384 1361
1385 gpio@6 {1362 led@6 {
1363 label = "ddimm6";
1386 reg = <6>;1364 reg = <6>;
1387 type = <PCA955X_TYPE_GPIO>;1365 retain-state-shutdown;
1366 default-state = "keep";
1367 type = <PCA955X_TYPE_LED>;
1388 };1368 };
1389 1369
1390 gpio@7 {1370 led@7 {
1371 label = "ddimm7";
1391 reg = <7>;1372 reg = <7>;
1392 type = <PCA955X_TYPE_GPIO>;1373 retain-state-shutdown;
1374 default-state = "keep";
1375 type = <PCA955X_TYPE_LED>;
1393 };1376 };
1394 1377
1395 gpio@8 {1378 led@8 {
1379 label = "ddimm8";
1396 reg = <8>;1380 reg = <8>;
1397 type = <PCA955X_TYPE_GPIO>;1381 retain-state-shutdown;
1382 default-state = "keep";
1383 type = <PCA955X_TYPE_LED>;
1398 };1384 };
1399 1385
1400 gpio@9 {1386 led@9 {
1387 label = "ddimm9";
1401 reg = <9>;1388 reg = <9>;
1402 type = <PCA955X_TYPE_GPIO>;1389 retain-state-shutdown;
1390 default-state = "keep";
1391 type = <PCA955X_TYPE_LED>;
1403 };1392 };
1404 1393
1405 gpio@10 {1394 led@10 {
1395 label = "ddimm10";
1406 reg = <10>;1396 reg = <10>;
1407 type = <PCA955X_TYPE_GPIO>;1397 retain-state-shutdown;
1398 default-state = "keep";
1399 type = <PCA955X_TYPE_LED>;
1408 };1400 };
1409 1401
1410 gpio@11 {1402 led@11 {
1403 label = "ddimm11";
1411 reg = <11>;1404 reg = <11>;
1412 type = <PCA955X_TYPE_GPIO>;1405 retain-state-shutdown;
1406 default-state = "keep";
1407 type = <PCA955X_TYPE_LED>;
1413 };1408 };
1414 1409
1415 gpio@12 {1410 led@12 {
1411 label = "ddimm12";
1416 reg = <12>;1412 reg = <12>;
1417 type = <PCA955X_TYPE_GPIO>;1413 retain-state-shutdown;
1414 default-state = "keep";
1415 type = <PCA955X_TYPE_LED>;
1418 };1416 };
1419 1417
1420 gpio@13 {1418 led@13 {
1419 label = "ddimm13";
1421 reg = <13>;1420 reg = <13>;
1422 type = <PCA955X_TYPE_GPIO>;1421 retain-state-shutdown;
1422 default-state = "keep";
1423 type = <PCA955X_TYPE_LED>;
1423 };1424 };
1424 1425
1425 gpio@14 {1426 led@14 {
1427 label = "ddimm14";
1426 reg = <14>;1428 reg = <14>;
1427 type = <PCA955X_TYPE_GPIO>;1429 retain-state-shutdown;
1430 default-state = "keep";
1431 type = <PCA955X_TYPE_LED>;
1428 };1432 };
1429 1433
1430 gpio@15 {1434 led@15 {
1435 label = "ddimm15";
1431 reg = <15>;1436 reg = <15>;
1432 type = <PCA955X_TYPE_GPIO>;1437 retain-state-shutdown;
1438 default-state = "keep";
1439 type = <PCA955X_TYPE_LED>;
1433 };1440 };
1434 };1441 };
1435 1442
1436 ibm-panel@62 {1443 pca9552@32 {
1437 compatible = "ibm,op-panel";1444 compatible = "ibm,pca9552";
1438 reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
1439 };
1440
1441 dps: dps310@76 {
1442 compatible = "infineon,dps310";
1443 reg = <0x76>;
1444 #io-channel-cells = <0>;
1445 };
1446
1447 eeprom@50 {
1448 compatible = "atmel,24c64";
1449 reg = <0x50>;
1450 };
1451
1452 eeprom@51 {
1453 compatible = "atmel,24c64";
1454 reg = <0x51>;
1455 };
1456};
1457
1458&i2c8 {
1459 status = "okay";
1460
1461 ucd90320@11 {
1462 compatible = "ti,ucd90320";
1463 reg = <0x11>;
1464 };
1465
1466 rtc@32 {
1467 compatible = "epson,rx8900";
1468 reg = <0x32>;1445 reg = <0x32>;
1469 };
1470
1471 tmp275@48 {
1472 compatible = "ti,tmp275";
1473 reg = <0x48>;
1474 };
1475
1476 tmp275@4a {
1477 compatible = "ti,tmp275";
1478 reg = <0x4a>;
1479 };
1480
1481 eeprom@50 {
1482 compatible = "atmel,24c64";
1483 reg = <0x50>;
1484 };
1485
1486 eeprom@51 {
1487 compatible = "atmel,24c64";
1488 reg = <0x51>;
1489 };
1490
1491 pca_pres2: pca9552@61 {
1492 compatible = "nxp,pca9552";
1493 reg = <0x61>;
1494 #address-cells = <1>;1446 #address-cells = <1>;
1495 #size-cells = <0>;1447 #size-cells = <0>;
1448
1496 gpio-controller;1449 gpio-controller;
1497 #gpio-cells = <2>;1450 #gpio-cells = <2>;
1498 1451
1499 gpio-line-names =1452 led@0 {
1500 "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",1453 label = "ddimm16";
1501 "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
1502 "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
1503 "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
1504 "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
1505 "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
1506 "", "", "", "";
1507
1508 gpio@0 {
1509 reg = <0>;1454 reg = <0>;
1510 type = <PCA955X_TYPE_GPIO>;1455 retain-state-shutdown;
1456 default-state = "keep";
1457 type = <PCA955X_TYPE_LED>;
1511 };1458 };
1512 1459
1513 gpio@1 {1460 led@1 {
1461 label = "ddimm17";
1514 reg = <1>;1462 reg = <1>;
1515 type = <PCA955X_TYPE_GPIO>;1463 retain-state-shutdown;
1464 default-state = "keep";
1465 type = <PCA955X_TYPE_LED>;
1516 };1466 };
1517 1467
1518 gpio@2 {1468 led@2 {
1469 label = "ddimm18";
1519 reg = <2>;1470 reg = <2>;
1520 type = <PCA955X_TYPE_GPIO>;1471 retain-state-shutdown;
1472 default-state = "keep";
1473 type = <PCA955X_TYPE_LED>;
1521 };1474 };
1522 1475
1523 gpio@3 {1476 led@3 {
1477 label = "ddimm19";
1524 reg = <3>;1478 reg = <3>;
1525 type = <PCA955X_TYPE_GPIO>;1479 retain-state-shutdown;
1480 default-state = "keep";
1481 type = <PCA955X_TYPE_LED>;
1526 };1482 };
1527 1483
1528 gpio@4 {1484 led@4 {
1485 label = "ddimm20";
1529 reg = <4>;1486 reg = <4>;
1530 type = <PCA955X_TYPE_GPIO>;1487 retain-state-shutdown;
1488 default-state = "keep";
1489 type = <PCA955X_TYPE_LED>;
1531 };1490 };
1532 1491
1533 gpio@5 {1492 led@5 {
1493 label = "ddimm21";
1534 reg = <5>;1494 reg = <5>;
1535 type = <PCA955X_TYPE_GPIO>;1495 retain-state-shutdown;
1496 default-state = "keep";
1497 type = <PCA955X_TYPE_LED>;
1536 };1498 };
1537 1499
1538 gpio@6 {1500 led@6 {
1501 label = "ddimm22";
1539 reg = <6>;1502 reg = <6>;
1540 type = <PCA955X_TYPE_GPIO>;1503 retain-state-shutdown;
1504 default-state = "keep";
1505 type = <PCA955X_TYPE_LED>;
1541 };1506 };
1542 1507
1543 gpio@7 {1508 led@7 {
1509 label = "ddimm23";
1544 reg = <7>;1510 reg = <7>;
1545 type = <PCA955X_TYPE_GPIO>;1511 retain-state-shutdown;
1512 default-state = "keep";
1513 type = <PCA955X_TYPE_LED>;
1546 };1514 };
1547 1515
1548 gpio@8 {1516 led@8 {
1517 label = "ddimm24";
1549 reg = <8>;1518 reg = <8>;
1550 type = <PCA955X_TYPE_GPIO>;1519 retain-state-shutdown;
1520 default-state = "keep";
1521 type = <PCA955X_TYPE_LED>;
1551 };1522 };
1552 1523
1553 gpio@9 {1524 led@9 {
1525 label = "ddimm25";
1554 reg = <9>;1526 reg = <9>;
1555 type = <PCA955X_TYPE_GPIO>;1527 retain-state-shutdown;
1528 default-state = "keep";
1529 type = <PCA955X_TYPE_LED>;
1556 };1530 };
1557 1531
1558 gpio@10 {1532 led@10 {
1533 label = "ddimm26";
1559 reg = <10>;1534 reg = <10>;
1560 type = <PCA955X_TYPE_GPIO>;1535 retain-state-shutdown;
1536 default-state = "keep";
1537 type = <PCA955X_TYPE_LED>;
1561 };1538 };
1562 1539
1563 gpio@11 {1540 led@11 {
1541 label = "ddimm27";
1564 reg = <11>;1542 reg = <11>;
1565 type = <PCA955X_TYPE_GPIO>;1543 retain-state-shutdown;
1544 default-state = "keep";
1545 type = <PCA955X_TYPE_LED>;
1566 };1546 };
1567 1547
1568 gpio@12 {1548 led@12 {
1549 label = "ddimm28";
1569 reg = <12>;1550 reg = <12>;
1570 type = <PCA955X_TYPE_GPIO>;1551 retain-state-shutdown;
1552 default-state = "keep";
1553 type = <PCA955X_TYPE_LED>;
1571 };1554 };
1572 1555
1573 gpio@13 {1556 led@13 {
1557 label = "ddimm29";
1574 reg = <13>;1558 reg = <13>;
1575 type = <PCA955X_TYPE_GPIO>;1559 retain-state-shutdown;
1560 default-state = "keep";
1561 type = <PCA955X_TYPE_LED>;
1576 };1562 };
1577 1563
1578 gpio@14 {1564 led@14 {
1565 label = "ddimm30";
1579 reg = <14>;1566 reg = <14>;
1580 type = <PCA955X_TYPE_GPIO>;1567 retain-state-shutdown;
1568 default-state = "keep";
1569 type = <PCA955X_TYPE_LED>;
1581 };1570 };
1582 1571
1583 gpio@15 {1572 led@15 {
1573 label = "ddimm31";
1584 reg = <15>;1574 reg = <15>;
1585 type = <PCA955X_TYPE_GPIO>;1575 retain-state-shutdown;
1576 default-state = "keep";
1577 type = <PCA955X_TYPE_LED>;
1586 };1578 };
1587 };1579 };
1588 1580
1589};1581 pca9552@33 {
1582 compatible = "ibm,pca9552";
1583 reg = <0x33>;
1584 #address-cells = <1>;
1585 #size-cells = <0>;
1590 1586
1591&i2c9 {1587 gpio-controller;
1592 status = "okay";1588 #gpio-cells = <2>;
1593 1589
1594 tmp423a@4c {1590 led@0 {
1595 compatible = "ti,tmp423";1591 label = "planar";
1596 reg = <0x4c>;1592 reg = <0>;
1597 };1593 retain-state-shutdown;
1594 default-state = "keep";
1595 type = <PCA955X_TYPE_LED>;
1596 };
1598 1597
1599 tmp423b@4d {1598 led@1 {
1599 label = "cpu0";
1600 reg = <1>;
1601 retain-state-shutdown;
1602 default-state = "keep";
1603 type = <PCA955X_TYPE_LED>;
1604 };
1605
1606 led@3 {
1607 label = "dasd-pyramid0";
1608 reg = <3>;
1609 retain-state-shutdown;
1610 default-state = "keep";
1611 type = <PCA955X_TYPE_LED>;
1612 };
1613
1614 led@4 {
1615 label = "dasd-pyramid1";
1616 reg = <4>;
1617 retain-state-shutdown;
1618 default-state = "keep";
1619 type = <PCA955X_TYPE_LED>;
1620 };
1621
1622 led@5 {
1623 label = "dasd-pyramid2";
1624 reg = <5>;
1625 retain-state-shutdown;
1626 default-state = "keep";
1627 type = <PCA955X_TYPE_LED>;
1628 };
1629
1630 led@6 {
1631 label = "cpu0-vrm0";
1632 reg = <6>;
1633 retain-state-shutdown;
1634 default-state = "keep";
1635 type = <PCA955X_TYPE_LED>;
1636 };
1637
1638 led@7 {
1639 label = "rtc-battery";
1640 reg = <7>;
1641 retain-state-shutdown;
1642 default-state = "keep";
1643 type = <PCA955X_TYPE_LED>;
1644 };
1645
1646 led@8 {
1647 label = "base-blyth";
1648 reg = <8>;
1649 retain-state-shutdown;
1650 default-state = "keep";
1651 type = <PCA955X_TYPE_LED>;
1652 };
1653
1654 led@9 {
1655 label = "pcieslot6";
1656 reg = <9>;
1657 retain-state-shutdown;
1658 default-state = "keep";
1659 type = <PCA955X_TYPE_LED>;
1660 };
1661
1662 led@10 {
1663 label = "pcieslot7";
1664 reg = <10>;
1665 retain-state-shutdown;
1666 default-state = "keep";
1667 type = <PCA955X_TYPE_LED>;
1668 };
1669
1670 led@11 {
1671 label = "pcieslot8";
1672 reg = <11>;
1673 retain-state-shutdown;
1674 default-state = "keep";
1675 type = <PCA955X_TYPE_LED>;
1676 };
1677
1678 led@12 {
1679 label = "pcieslot9";
1680 reg = <12>;
1681 retain-state-shutdown;
1682 default-state = "keep";
1683 type = <PCA955X_TYPE_LED>;
1684 };
1685
1686 led@13 {
1687 label = "pcieslot10";
1688 reg = <13>;
1689 retain-state-shutdown;
1690 default-state = "keep";
1691 type = <PCA955X_TYPE_LED>;
1692 };
1693
1694 led@14 {
1695 label = "pcieslot11";
1696 reg = <14>;
1697 retain-state-shutdown;
1698 default-state = "keep";
1699 type = <PCA955X_TYPE_LED>;
1700 };
1701
1702 led@15 {
1703 label = "tpm-wilson";
1704 reg = <15>;
1705 retain-state-shutdown;
1706 default-state = "keep";
1707 type = <PCA955X_TYPE_LED>;
1708 };
1709 };
1710
1711 si7021-a20@40 {
1712 compatible = "silabs,si7020";
1713 reg = <0x40>;
1714 };
1715
1716 tmp275@48 {
1717 compatible = "ti,tmp275";
1718 reg = <0x48>;
1719 };
1720
1721 max: max31785@52 {
1722 compatible = "maxim,max31785a";
1723 reg = <0x52>;
1724 #address-cells = <1>;
1725 #size-cells = <0>;
1726
1727 fan0: fan@0 {
1728 compatible = "pmbus-fan";
1729 reg = <0>;
1730 tach-pulses = <2>;
1731 };
1732
1733 fan1: fan@1 {
1734 compatible = "pmbus-fan";
1735 reg = <1>;
1736 tach-pulses = <2>;
1737 };
1738
1739 fan2: fan@2 {
1740 compatible = "pmbus-fan";
1741 reg = <2>;
1742 tach-pulses = <2>;
1743 };
1744
1745 fan3: fan@3 {
1746 compatible = "pmbus-fan";
1747 reg = <3>;
1748 tach-pulses = <2>;
1749 };
1750
1751 fan4: fan@4 {
1752 compatible = "pmbus-fan";
1753 reg = <4>;
1754 tach-pulses = <2>;
1755 };
1756
1757 fan5: fan@5 {
1758 compatible = "pmbus-fan";
1759 reg = <5>;
1760 tach-pulses = <2>;
1761 };
1762 };
1763
1764 pca9551@60 {
1765 compatible = "nxp,pca9551";
1766 reg = <0x60>;
1767 #address-cells = <1>;
1768 #size-cells = <0>;
1769
1770 gpio-controller;
1771 #gpio-cells = <2>;
1772
1773 led@0 {
1774 label = "front-sys-id0";
1775 reg = <0>;
1776 retain-state-shutdown;
1777 default-state = "keep";
1778 type = <PCA955X_TYPE_LED>;
1779 };
1780
1781 led@1 {
1782 label = "front-check-log0";
1783 reg = <1>;
1784 retain-state-shutdown;
1785 default-state = "keep";
1786 type = <PCA955X_TYPE_LED>;
1787 };
1788
1789 led@2 {
1790 label = "front-enc-fault1";
1791 reg = <2>;
1792 retain-state-shutdown;
1793 default-state = "keep";
1794 type = <PCA955X_TYPE_LED>;
1795 };
1796
1797 led@3 {
1798 label = "front-sys-pwron0";
1799 reg = <3>;
1800 retain-state-shutdown;
1801 default-state = "keep";
1802 type = <PCA955X_TYPE_LED>;
1803 };
1804 };
1805
1806 pca0: pca9552@61 {
1807 compatible = "nxp,pca9552";
1808 reg = <0x61>;
1809 #address-cells = <1>;
1810 #size-cells = <0>;
1811
1812 gpio-controller;
1813 #gpio-cells = <2>;
1814
1815 led@0 {
1816 label = "fan0";
1817 reg = <0>;
1818 retain-state-shutdown;
1819 default-state = "keep";
1820 type = <PCA955X_TYPE_LED>;
1821 };
1822
1823 led@1 {
1824 label = "fan1";
1825 reg = <1>;
1826 retain-state-shutdown;
1827 default-state = "keep";
1828 type = <PCA955X_TYPE_LED>;
1829 };
1830
1831 led@2 {
1832 label = "fan2";
1833 reg = <2>;
1834 retain-state-shutdown;
1835 default-state = "keep";
1836 type = <PCA955X_TYPE_LED>;
1837 };
1838
1839 led@3 {
1840 label = "fan3";
1841 reg = <3>;
1842 retain-state-shutdown;
1843 default-state = "keep";
1844 type = <PCA955X_TYPE_LED>;
1845 };
1846
1847 led@4 {
1848 label = "fan4";
1849 reg = <4>;
1850 retain-state-shutdown;
1851 default-state = "keep";
1852 type = <PCA955X_TYPE_LED>;
1853 };
1854
1855 led@5 {
1856 label = "fan5";
1857 reg = <5>;
1858 retain-state-shutdown;
1859 default-state = "keep";
1860 type = <PCA955X_TYPE_LED>;
1861 };
1862 };
1863
1864 ibm-panel@62 {
1865 compatible = "ibm,op-panel";
1866 reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
1867 };
1868
1869 dps: dps310@76 {
1870 compatible = "infineon,dps310";
1871 reg = <0x76>;
1872 #io-channel-cells = <0>;
1873 };
1874
1875 eeprom@50 {
1876 compatible = "atmel,24c64";
1877 reg = <0x50>;
1878 };
1879
1880 eeprom@51 {
1881 compatible = "atmel,24c64";
1882 reg = <0x51>;
1883 };
1884};
1885
1886&i2c8 {
1887 status = "okay";
1888
1889 ucd90320@11 {
1890 compatible = "ti,ucd90320";
1891 reg = <0x11>;
1892 };
1893
1894 rtc@32 {
1895 compatible = "epson,rx8900";
1896 reg = <0x32>;
1897 };
1898
1899 tmp275@48 {
1900 compatible = "ti,tmp275";
1901 reg = <0x48>;
1902 };
1903
1904 tmp275@4a {
1905 compatible = "ti,tmp275";
1906 reg = <0x4a>;
1907 };
1908
1909 eeprom@50 {
1910 compatible = "atmel,24c64";
1911 reg = <0x50>;
1912 };
1913
1914 eeprom@51 {
1915 compatible = "atmel,24c64";
1916 reg = <0x51>;
1917 };
1918
1919 pca_pres3: pca9552@60 {
1920 compatible = "nxp,pca9552";
1921 reg = <0x60>;
1922 #address-cells = <1>;
1923 #size-cells = <0>;
1924 gpio-controller;
1925 #gpio-cells = <2>;
1926
1927 gpio-line-names =
1928 "", "", "", "", "", "", "", "",
1929 "", "", "", "", "", "", "power-config-full-load", "";
1930 };
1931
1932 pca_pres2: pca9552@61 {
1933 compatible = "nxp,pca9552";
1934 reg = <0x61>;
1935 #address-cells = <1>;
1936 #size-cells = <0>;
1937 gpio-controller;
1938 #gpio-cells = <2>;
1939
1940 gpio-line-names =
1941 "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
1942 "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
1943 "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
1944 "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
1945 "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
1946 "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
1947 "", "", "", "";
1948 };
1949
1950};
1951
1952&i2c9 {
1953 status = "okay";
1954
1955 tmp423a@4c {
1956 compatible = "ti,tmp423";
1957 reg = <0x4c>;
1958 };
1959
1960 tmp423b@4d {
1600 compatible = "ti,tmp423";1961 compatible = "ti,tmp423";
1601 reg = <0x4d>;1962 reg = <0x4d>;
1602 };1963 };
@@ -1639,6 +2000,32 @@ · 36 unmodified lines
1639 reg = <0x49>;2000 reg = <0x49>;
1640 };2001 };
1641 2002
2003 pca9551@60 {
2004 compatible = "nxp,pca9551";
2005 reg = <0x60>;
2006 #address-cells = <1>;
2007 #size-cells = <0>;
2008
2009 gpio-controller;
2010 #gpio-cells = <2>;
2011
2012 led@0 {
2013 label = "cablecard10-cxp-top";
2014 reg = <0>;
2015 retain-state-shutdown;
2016 default-state = "keep";
2017 type = <PCA955X_TYPE_LED>;
2018 };
2019
2020 led@1 {
2021 label = "cablecard10-cxp-bot";
2022 reg = <1>;
2023 retain-state-shutdown;
2024 default-state = "keep";
2025 type = <PCA955X_TYPE_LED>;
2026 };
2027 };
2028
1642 pca9546@70 {2029 pca9546@70 {
1643 compatible = "nxp,pca9546";2030 compatible = "nxp,pca9546";
1644 reg = <0x70>;2031 reg = <0x70>;
@@ -1673,6 +2060,11 @@ · 28 unmodified lines
1673 2060
1674&i2c12 {2061&i2c12 {
1675 status = "okay";2062 status = "okay";
2063
2064 eeprom@50 {
2065 compatible = "atmel,24c64";
2066 reg = <0x50>;
2067 };
1676};2068};
1677 2069
1678&i2c13 {2070&i2c13 {
@@ -1682,6 +2074,80 @@ · 3 unmodified lines
1682 compatible = "atmel,24c64";2074 compatible = "atmel,24c64";
1683 reg = <0x50>;2075 reg = <0x50>;
1684 };2076 };
2077
2078 pca9552@60 {
2079 compatible = "nxp,pca9552";
2080 reg = <0x60>;
2081 #address-cells = <1>;
2082 #size-cells = <0>;
2083
2084 gpio-controller;
2085 #gpio-cells = <2>;
2086
2087 led@0 {
2088 label = "nvme0";
2089 reg = <0>;
2090 retain-state-shutdown;
2091 default-state = "keep";
2092 type = <PCA955X_TYPE_LED>;
2093 };
2094
2095 led@1 {
2096 label = "nvme1";
2097 reg = <1>;
2098 retain-state-shutdown;
2099 default-state = "keep";
2100 type = <PCA955X_TYPE_LED>;
2101 };
2102
2103 led@2 {
2104 label = "nvme2";
2105 reg = <2>;
2106 retain-state-shutdown;
2107 default-state = "keep";
2108 type = <PCA955X_TYPE_LED>;
2109 };
2110
2111 led@3 {
2112 label = "nvme3";
2113 reg = <3>;
2114 retain-state-shutdown;
2115 default-state = "keep";
2116 type = <PCA955X_TYPE_LED>;
2117 };
2118
2119 led@4 {
2120 label = "nvme4";
2121 reg = <4>;
2122 retain-state-shutdown;
2123 default-state = "keep";
2124 type = <PCA955X_TYPE_LED>;
2125 };
2126
2127 led@5 {
2128 label = "nvme5";
2129 reg = <5>;
2130 retain-state-shutdown;
2131 default-state = "keep";
2132 type = <PCA955X_TYPE_LED>;
2133 };
2134
2135 led@6 {
2136 label = "nvme6";
2137 reg = <6>;
2138 retain-state-shutdown;
2139 default-state = "keep";
2140 type = <PCA955X_TYPE_LED>;
2141 };
2142
2143 led@7 {
2144 label = "nvme7";
2145 reg = <7>;
2146 retain-state-shutdown;
2147 default-state = "keep";
2148 type = <PCA955X_TYPE_LED>;
2149 };
2150 };
1685};2151};
1686 2152
1687&i2c14 {2153&i2c14 {
@@ -1691,6 +2157,80 @@ · 3 unmodified lines
1691 compatible = "atmel,24c64";2157 compatible = "atmel,24c64";
1692 reg = <0x50>;2158 reg = <0x50>;
1693 };2159 };
2160
2161 pca9552@60 {
2162 compatible = "nxp,pca9552";
2163 reg = <0x60>;
2164 #address-cells = <1>;
2165 #size-cells = <0>;
2166
2167 gpio-controller;
2168 #gpio-cells = <2>;
2169
2170 led@0 {
2171 label = "nvme8";
2172 reg = <0>;
2173 retain-state-shutdown;
2174 default-state = "keep";
2175 type = <PCA955X_TYPE_LED>;
2176 };
2177
2178 led@1 {
2179 label = "nvme9";
2180 reg = <1>;
2181 retain-state-shutdown;
2182 default-state = "keep";
2183 type = <PCA955X_TYPE_LED>;
2184 };
2185
2186 led@2 {
2187 label = "nvme10";
2188 reg = <2>;
2189 retain-state-shutdown;
2190 default-state = "keep";
2191 type = <PCA955X_TYPE_LED>;
2192 };
2193
2194 led@3 {
2195 label = "nvme11";
2196 reg = <3>;
2197 retain-state-shutdown;
2198 default-state = "keep";
2199 type = <PCA955X_TYPE_LED>;
2200 };
2201
2202 led@4 {
2203 label = "nvme12";
2204 reg = <4>;
2205 retain-state-shutdown;
2206 default-state = "keep";
2207 type = <PCA955X_TYPE_LED>;
2208 };
2209
2210 led@5 {
2211 label = "nvme13";
2212 reg = <5>;
2213 retain-state-shutdown;
2214 default-state = "keep";
2215 type = <PCA955X_TYPE_LED>;
2216 };
2217
2218 led@6 {
2219 label = "nvme14";
2220 reg = <6>;
2221 retain-state-shutdown;
2222 default-state = "keep";
2223 type = <PCA955X_TYPE_LED>;
2224 };
2225
2226 led@7 {
2227 label = "nvme15";
2228 reg = <7>;
2229 retain-state-shutdown;
2230 default-state = "keep";
2231 type = <PCA955X_TYPE_LED>;
2232 };
2233 };
1694};2234};
1695 2235
1696&i2c15 {2236&i2c15 {
@@ -1700,6 +2240,80 @@ · 3 unmodified lines
1700 compatible = "atmel,24c64";2240 compatible = "atmel,24c64";
1701 reg = <0x50>;2241 reg = <0x50>;
1702 };2242 };
2243
2244 pca9552@60 {
2245 compatible = "nxp,pca9552";
2246 reg = <0x60>;
2247 #address-cells = <1>;
2248 #size-cells = <0>;
2249
2250 gpio-controller;
2251 #gpio-cells = <2>;
2252
2253 led@0 {
2254 label = "nvme16";
2255 reg = <0>;
2256 retain-state-shutdown;
2257 default-state = "keep";
2258 type = <PCA955X_TYPE_LED>;
2259 };
2260
2261 led@1 {
2262 label = "nvme17";
2263 reg = <1>;
2264 retain-state-shutdown;
2265 default-state = "keep";
2266 type = <PCA955X_TYPE_LED>;
2267 };
2268
2269 led@2 {
2270 label = "nvme18";
2271 reg = <2>;
2272 retain-state-shutdown;
2273 default-state = "keep";
2274 type = <PCA955X_TYPE_LED>;
2275 };
2276
2277 led@3 {
2278 label = "nvme19";
2279 reg = <3>;
2280 retain-state-shutdown;
2281 default-state = "keep";
2282 type = <PCA955X_TYPE_LED>;
2283 };
2284
2285 led@4 {
2286 label = "nvme20";
2287 reg = <4>;
2288 retain-state-shutdown;
2289 default-state = "keep";
2290 type = <PCA955X_TYPE_LED>;
2291 };
2292
2293 led@5 {
2294 label = "nvme21";
2295 reg = <5>;
2296 retain-state-shutdown;
2297 default-state = "keep";
2298 type = <PCA955X_TYPE_LED>;
2299 };
2300
2301 led@6 {
2302 label = "nvme22";
2303 reg = <6>;
2304 retain-state-shutdown;
2305 default-state = "keep";
2306 type = <PCA955X_TYPE_LED>;
2307 };
2308
2309 led@7 {
2310 label = "nvme23";
2311 reg = <7>;
2312 retain-state-shutdown;
2313 default-state = "keep";
2314 type = <PCA955X_TYPE_LED>;
2315 };
2316 };
1703};2317};
1704 2318
1705&vuart1 {2319&vuart1 {
@@ -1777,3 +2391,14 @@ · 71 unmodified lines
1777 status = "okay";2391 status = "okay";
1778 memory-region = <&vga_memory>;2392 memory-region = <&vga_memory>;
1779};2393};
2394
2395&kcs2 {
2396 status = "okay";
2397 aspeed,lpc-io-reg = <0xca8 0xcac>;
2398};
2399
2400&kcs3 {
2401 status = "okay";
2402 aspeed,lpc-io-reg = <0xca2>;
2403 aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
2404};
arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts+8−1
@@ -3,6 +3,7 @@ · 2 unmodified lines
3#include "aspeed-g5.dtsi"3#include "aspeed-g5.dtsi"
4#include <dt-bindings/gpio/aspeed-gpio.h>4#include <dt-bindings/gpio/aspeed-gpio.h>
5#include <dt-bindings/leds/leds-pca955x.h>5#include <dt-bindings/leds/leds-pca955x.h>
6#include <dt-bindings/interrupt-controller/irq.h>
6 7
7/ {8/ {
8 model = "FP5280G2 BMC";9 model = "FP5280G2 BMC";
@@ -245,7 +246,7 @@ · 236 unmodified lines
245 label = "bmc";246 label = "bmc";
246 m25p,fast-read;247 m25p,fast-read;
247 spi-max-frequency = <50000000>;248 spi-max-frequency = <50000000>;
248#include "openbmc-flash-layout.dtsi"249#include "openbmc-flash-layout-64.dtsi"
249 };250 };
250};251};
251 252
@@ -902,4 +903,10 @@ · 650 unmodified lines
902 903
903};904};
904 905
906&kcs3 {
907 status = "okay";
908 aspeed,lpc-io-reg = <0xca2>;
909 aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
910};
911
905#include "ibm-power9-dual.dtsi"912#include "ibm-power9-dual.dtsi"
arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts+328−0
@@ -0,0 +1,328 @@
1// SPDX-License-Identifier: GPL-2.0-or-later
2// Copyright 2021 Inventec Corp.
3
4/dts-v1/;
5
6#include "aspeed-g6.dtsi"
7#include "aspeed-g6-pinctrl.dtsi"
8#include <dt-bindings/i2c/i2c.h>
9#include <dt-bindings/gpio/aspeed-gpio.h>
10
11/ {
12 model = "TRANSFORMERS BMC";
13 compatible = "inventec,transformer-bmc", "aspeed,ast2600";
14
15 aliases {
16 serial4 = &uart5;
17 };
18
19 chosen {
20 stdout-path = &uart5;
21 bootargs = "console=ttyS4,115200n8";
22 };
23
24 memory@80000000 {
25 device_type = "memory";
26 reg = <0x80000000 0x80000000>;
27 };
28
29 leds {
30 compatible = "gpio-leds";
31
32 // UID led
33 uid {
34 label = "UID_LED";
35 gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
36 };
37
38 // Heart beat led
39 heartbeat {
40 label = "HB_LED";
41 gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
42 };
43 };
44};
45
46&mdio0 {
47 status = "okay";
48
49 ethphy0: ethernet-phy@0 {
50 compatible = "ethernet-phy-ieee802.3-c22";
51 reg = <1>;
52 };
53};
54
55&mac3 {
56 status = "okay";
57 phy-mode = "rgmii";
58 phy-handle = <&ethphy0>;
59 pinctrl-names = "default";
60 pinctrl-0 = <&pinctrl_rgmii4_default>;
61};
62
63&fmc {
64 status = "okay";
65
66 flash@0 {
67 status = "okay";
68 m25p,fast-read;
69 label = "bmc";
70 spi-max-frequency = <33000000>;
71 spi-tx-bus-width = <2>;
72 spi-rx-bus-width = <2>;
73#include "openbmc-flash-layout.dtsi"
74 };
75
76 flash@1 {
77 status = "okay";
78 m25p,fast-read;
79 label = "bmc2";
80 spi-max-frequency = <33000000>;
81 spi-tx-bus-width = <2>;
82 spi-rx-bus-width = <2>;
83 };
84};
85
86&spi1 {
87 status = "okay";
88 pinctrl-names = "default";
89 pinctrl-0 = <&pinctrl_spi1_default>;
90
91 flash@0 {
92 status = "okay";
93 m25p,fast-read;
94 label = "bios";
95 spi-max-frequency = <33000000>;
96 spi-tx-bus-width = <1>;
97 spi-rx-bus-width = <1>;
98 };
99};
100
101&wdt1 {
102 status = "okay";
103};
104
105&uart1 {
106 status = "okay";
107};
108
109&uart5 {
110 status = "okay";
111};
112
113&i2c0 {
114 status = "okay";
115
116 //Set bmc' slave address;
117 bmc_slave@10 {
118 compatible = "ipmb-dev";
119 reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
120 i2c-protocol;
121 };
122};
123
124&i2c2 {
125 status = "okay";
126};
127
128&i2c3 {
129 // FRU AT24C512C-SSHM-T
130 status = "okay";
131 eeprom@50 {
132 compatible = "atmel,24c512";
133 reg = <0x50>;
134 pagesize = <128>;
135 };
136};
137
138&i2c5 {
139 status = "okay";
140};
141
142&i2c6 {
143 status = "okay";
144
145 tmp75@49 {
146 compatible = "ti,tmp75";
147 reg = <0x49>;
148 };
149
150 tmp75@4f {
151 compatible = "ti,tmp75";
152 reg = <0x4f>;
153 };
154
155 tmp468@48 {
156 compatible = "ti,tmp468";
157 reg = <0x48>;
158 };
159};
160
161&i2c7 {
162 status = "okay";
163 adm1278@40 {
164 compatible = "adi,adm1278";
165 reg = <0x40>;
166 };
167};
168
169
170&i2c8 {
171 // FRU AT24C512C-SSHM-T
172 status = "okay";
173
174 eeprom@51 {
175 compatible = "atmel,24c512";
176 reg = <0x51>;
177 pagesize = <128>;
178 };
179
180 eeprom@53 {
181 compatible = "atmel,24c512";
182 reg = <0x53>;
183 pagesize = <128>;
184 };
185};
186
187&i2c9 {
188 // M.2
189 status = "okay";
190};
191
192&i2c10 {
193 // I2C EXPANDER
194 status = "okay";
195
196 i2c-switch@71 {
197 compatible = "nxp,pca9544";
198 #address-cells = <1>;
199 #size-cells = <0>;
200 reg = <0x71>;
201 };
202
203 i2c-switch@73 {
204 compatible = "nxp,pca9544";
205 #address-cells = <1>;
206 #size-cells = <0>;
207 reg = <0x73>;
208 };
209};
210
211&i2c11 {
212 // I2C EXPANDER
213 status = "okay";
214
215 i2c-switch@70 {
216 compatible = "nxp,pca9544";
217 #address-cells = <1>;
218 #size-cells = <0>;
219 reg = <0x70>;
220
221 pcie_eeprom_riser1: i2c@0 {
222 #address-cells = <1>;
223 #size-cells = <0>;
224 reg = <0>;
225
226 eeprom@55 {
227 compatible = "atmel,24c512";
228 reg = <0x55>;
229 pagesize = <128>;
230 };
231 };
232
233 pcie_eeprom_riser2: i2c@1 {
234 #address-cells = <1>;
235 #size-cells = <0>;
236 reg = <1>;
237
238 eeprom@55 {
239 compatible = "atmel,24c512";
240 reg = <0x55>;
241 pagesize = <128>;
242 };
243 };
244
245 pcie_eeprom_riser3: i2c@2 {
246 #address-cells = <1>;
247 #size-cells = <0>;
248 reg = <2>;
249
250 eeprom@55 {
251 compatible = "atmel,24c512";
252 reg = <0x55>;
253 pagesize = <128>;
254 };
255 };
256 };
257};
258
259&i2c12 {
260 status = "okay";
261
262 psu0:psu0@58 {
263 compatible = "pmbus";
264 reg = <0x58>;
265 };
266};
267
268&gpio0 {
269 status = "okay";
270 gpio-line-names =
271 /*A0-A7*/ "","","","","","","","",
272 /*B0-B7*/ "presence-ps0","power-chassis-good","","","","","presence-ps1","",
273 /*C0-C7*/ "","","","","","","","",
274 /*D0-D7*/ "","","","","","","","",
275 /*E0-E7*/ "","","","","","","","",
276 /*F0-F7*/ "","","","","power-chassis-control","","","",
277 /*G0-G7*/ "","","jtag-mux","","","","","",
278 /*H0-H7*/ "","","","","reset-button","power-button","","",
279 /*I0-I7*/ "","","","","","","","",
280 /*J0-J7*/ "","","","","","","","",
281 /*K0-K7*/ "","","","","","","","",
282 /*L0-L7*/ "","","","","","","","",
283 /*M0-M7*/ "","","","","","","","",
284 /*N0-N7*/ "","","","","","","","",
285 /*O0-O7*/ "","","","","","","","",
286 /*P0-P7*/ "","","","tck-mux","","","","",
287 /*Q0-Q7*/ "","","","","","","","",
288 /*R0-R7*/ "","","","","","","","",
289 /*S0-S7*/ "","","","","","","","",
290 /*T0-T7*/ "","","","","","","","",
291 /*U0-U7*/ "","nmi-button","","","","","","",
292 /*V0-V7*/ "","","","","power-config-full-load","","","",
293 /*W0-W7*/ "","","","","","","","",
294 /*X0-X7*/ "","","","","","","","",
295 /*Y0-Y7*/ "","","","","","","","",
296 /*Z0-Z7*/ "","","","","","","","",
297 /*AA0-AA7*/ "","","","","","","","",
298 /*AB0-AB7*/ "","","","","","","","",
299 /*AC0-AC7*/ "","","","","","","","";
300};
301
302&lpc_snoop {
303 status = "okay";
304 snoop-ports = <0x80>;
305};
306
307&emmc_controller {
308 status = "okay";
309};
310
311&emmc {
312 status = "okay";
313 non-removable;
314 max-frequency = <52000000>;
315 bus-width = <8>;
316};
317
318&vhub {
319 status = "okay";
320 aspeed,vhub-downstream-ports = <7>;
321 aspeed,vhub-generic-endpoints = <21>;
322 pinctrl-names = "default";
323 pinctrl-0 = <&pinctrl_usb2ad_default>;
324};
325
326&rtc {
327 status = "okay";
328};
arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts+488−0
@@ -0,0 +1,488 @@
1// SPDX-License-Identifier: GPL-2.0+
2/dts-v1/;
3
4#include "aspeed-g5.dtsi"
5#include <dt-bindings/gpio/aspeed-gpio.h>
6
7/ {
8 model = "Tyan S7106 BMC";
9 compatible = "tyan,s7106-bmc", "aspeed,ast2500";
10
11 chosen {
12 stdout-path = &uart5;
13 bootargs = "console=ttyS4,115200 earlycon";
14 };
15
16 memory@80000000 {
17 device_type = "memory";
18 reg = <0x80000000 0x20000000>;
19 };
20
21 reserved-memory {
22 #address-cells = <1>;
23 #size-cells = <1>;
24 ranges;
25
26 p2a_memory: region@987f0000 {
27 no-map;
28 reg = <0x987f0000 0x00010000>; /* 64KB */
29 };
30
31 vga_memory: framebuffer@9f000000 {
32 no-map;
33 reg = <0x9f000000 0x01000000>; /* 16M */
34 };
35
36 gfx_memory: framebuffer {
37 size = <0x01000000>; /* 16M */
38 alignment = <0x01000000>;
39 compatible = "shared-dma-pool";
40 reusable;
41 };
42 };
43
44 leds {
45 compatible = "gpio-leds";
46
47 identify {
48 gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
49 };
50
51 heartbeat {
52 gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
53 };
54 };
55
56 iio-hwmon {
57 compatible = "iio-hwmon";
58 io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
59 <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
60 <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
61 <&adc 12>, <&adc 13>, <&adc 14>;
62 };
63
64 iio-hwmon-battery {
65 compatible = "iio-hwmon";
66 io-channels = <&adc 15>;
67 };
68};
69
70&fmc {
71 status = "okay";
72 flash@0 {
73 label = "bmc";
74 status = "okay";
75 m25p,fast-read;
76#include "openbmc-flash-layout.dtsi"
77 };
78};
79
80&spi1 {
81 status = "okay";
82 pinctrl-names = "default";
83 pinctrl-0 = <&pinctrl_spi1_default>;
84
85 flash@0 {
86 status = "okay";
87 label = "pnor";
88 m25p,fast-read;
89 };
90};
91
92&uart1 {
93 /* Rear RS-232 connector */
94 status = "okay";
95 pinctrl-names = "default";
96 pinctrl-0 = <&pinctrl_txd1_default
97 &pinctrl_rxd1_default>;
98};
99
100&uart2 {
101 /* RS-232 connector on header */
102 status = "okay";
103 pinctrl-names = "default";
104 pinctrl-0 = <&pinctrl_txd2_default
105 &pinctrl_rxd2_default>;
106};
107
108&uart3 {
109 /* Alternative to vuart to internally connect (route) to uart1
110 * when vuart cannot be used due to BIOS limitations.
111 */
112 status = "okay";
113};
114
115&uart4 {
116 /* Alternative to vuart to internally connect (route) to the
117 * external port usually used by uart1 when vuart cannot be
118 * used due to BIOS limitations.
119 */
120 status = "okay";
121};
122
123&uart5 {
124 /* BMC "debug" (console) UART; connected to RS-232 connector
125 * on header; selectable via jumpers as alternative to uart2
126 */
127 status = "okay";
128};
129
130&vuart {
131 status = "okay";
132};
133
134&lpc_ctrl {
135 status = "okay";
136};
137
138&p2a {
139 status = "okay";
140 memory-region = <&p2a_memory>;
141};
142
143&lpc_snoop {
144 status = "okay";
145 snoop-ports = <0x80>;
146};
147
148&adc {
149 status = "okay";
150};
151
152&vhub {
153 status = "okay";
154};
155
156&pwm_tacho {
157 status = "okay";
158 pinctrl-names = "default";
159 pinctrl-0 = <&pinctrl_pwm0_default
160 &pinctrl_pwm1_default
161 &pinctrl_pwm3_default
162 &pinctrl_pwm4_default>;
163
164 /* CPU fan #0 */
165 fan@0 {
166 reg = <0x00>;
167 aspeed,fan-tach-ch = /bits/ 8 <0x00>;
168 };
169
170 /* CPU fan #1 */
171 fan@1 {
172 reg = <0x01>;
173 aspeed,fan-tach-ch = /bits/ 8 <0x01>;
174 };
175
176 /* PWM group for chassis fans #1, #2, #3 and #4 */
177 fan@2 {
178 reg = <0x03>;
179 aspeed,fan-tach-ch = /bits/ 8 <0x02>;
180 };
181
182 fan@3 {
183 reg = <0x03>;
184 aspeed,fan-tach-ch = /bits/ 8 <0x03>;
185 };
186
187 fan@4 {
188 reg = <0x03>;
189 aspeed,fan-tach-ch = /bits/ 8 <0x04>;
190 };
191
192 fan@5 {
193 reg = <0x03>;
194 aspeed,fan-tach-ch = /bits/ 8 <0x05>;
195 };
196
197 /* PWM group for chassis fans #5 and #6 */
198 fan@6 {
199 reg = <0x04>;
200 aspeed,fan-tach-ch = /bits/ 8 <0x06>;
201 };
202
203 fan@7 {
204 reg = <0x04>;
205 aspeed,fan-tach-ch = /bits/ 8 <0x07>;
206 };
207};
208
209&i2c0 {
210 status = "okay";
211
212 /* Hardware monitor with temperature sensors */
213 nct7802@28 {
214 compatible = "nuvoton,nct7802";
215 reg = <0x28>;
216 };
217
218 /* Also connected to:
219 * - IPMB pin header
220 * - CPU #0 memory error LED @ 0x3A
221 * - CPU #1 memory error LED @ 0x3C
222 */
223};
224
225&i2c1 {
226 /* Directly connected to PCH SMBUS #0 */
227 status = "okay";
228};
229
230&i2c2 {
231 status = "okay";
232
233 /* BMC EEPROM, incl. mainboard FRU */
234 eeprom@50 {
235 compatible = "atmel,24c256";
236 reg = <0x50>;
237 };
238
239 /* Also connected to:
240 * - fan header
241 * - mini-SAS HD connector
242 * - SSATA SGPIO
243 * - via switch (BMC_SMB3_PCH_IE_SML3_EN, active low)
244 * to PCH SMBUS #3
245 */
246};
247
248&i2c3 {
249 status = "okay";
250
251 /* PSU1 FRU @ 0xA0 */
252 eeprom@50 {
253 compatible = "atmel,24c02";
254 reg = <0x50>;
255 };
256
257 /* PSU2 FRU @ 0xA2 */
258 eeprom@51 {
259 compatible = "atmel,24c02";
260 reg = <0x51>;
261 };
262
263 /* PSU1 @ 0xB0 */
264 power-supply@58 {
265 compatible = "pmbus";
266 reg = <0x58>;
267 };
268
269 /* PSU2 @ 0xB2 */
270 power-supply@59 {
271 compatible = "pmbus";
272 reg = <0x59>;
273 };
274
275 /* Also connected to:
276 * - PCH SMBUS #1
277 */
278};
279
280&i2c4 {
281 status = "okay";
282
283 /* Connected to:
284 * - PCH SMBUS #2
285 */
286
287 /* Connected via switch to:
288 * - CPU #0 channels ABC VDDQ @ 0x80
289 * - CPU #0 channels DEF VDDQ @ 0x81
290 * - CPU #1 channels ABC VDDQ @ 0x82
291 * - CPU #1 channels DEF VDDQ @ 0x83
292 * - CPU #0 VCCIO & VMCP @ 0x52
293 * - CPU #1 VCCIO & VMCP @ 0x53
294 * - CPU #0 VCCIN @ 0xC0
295 * - CPU #0 VSA @ 0xC2
296 * - CPU #1 VCCIN @ 0xC4
297 * - CPU #1 VSA @ 0xC6
298 * - J110
299 */
300};
301
302&i2c5 {
303 status = "okay";
304
305 /* Connected via switch (PCH_BMC_SMB_SW_P) to:
306 * - mainboard FRU @ 0xAE
307 * - XDP connector
308 * - ME debug header
309 * - clock buffer @ 0xD8
310 * - i2c4 via switch (PCH_VR_SMBUS_SW_P; controlled by PCH)
311 * - PCH SMBUS
312 */
313};
314
315&i2c6 {
316 status = "okay";
317
318 /* Connected via switch (BMC_PE_SMB_EN_1_N) to
319 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
320 * - 0,0: PCIE slot 1, SMB #1
321 * - 0,1: PCIE slot 1, SMB #2
322 * - 1,0: PCIE slot 2, SMB #1
323 * - 1,1: PCIE slot 2, SMB #2
324 */
325
326 /* Connected via switch (BMC_PE_SMB_EN_2_N) to
327 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
328 * - 0,0: OCP0 (A) SMB
329 * - 0,1: OCP0 (C) SMB
330 * - 1,0: OCP1 (A) SMB
331 * - 1,1: NC
332 */
333};
334
335&i2c7 {
336 status = "okay";
337
338 /* Connected to:
339 * - PCH SMBUS #4
340 */
341};
342
343&i2c8 {
344 status = "okay";
345
346 /* Not connected */
347};
348
349&mac0 {
350 status = "okay";
351 use-ncsi;
352 pinctrl-names = "default";
353 pinctrl-0 = <&pinctrl_rmii1_default>;
354};
355
356&mac1 {
357 status = "okay";
358 pinctrl-names = "default";
359 pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
360};
361
362&ibt {
363 status = "okay";
364};
365
366&kcs1 {
367 status = "okay";
368 aspeed,lpc-io-reg = <0xca8>;
369};
370
371&kcs3 {
372 status = "okay";
373 aspeed,lpc-io-reg = <0xca2>;
374};
375
376/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
377&gfx {
378 status = "okay";
379 memory-region = <&gfx_memory>;
380};
381
382/* We're following the GPIO naming as defined at
383 * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
384 *
385 * Notes on led-identify and id-button:
386 * - A physical button is connected to id-button which
387 * triggers the clock on a D flip-flop. The /Q output of the
388 * flip-flop drives its D input.
389 * - The flip-flop's Q output drives led-identify which is
390 * connected to LEDs.
391 * - With that, every button press toggles the LED between on and off.
392 *
393 * Notes on power-, reset- and nmi- button and control:
394 * - The -button signals can be used to monitor physical buttons.
395 * - The -control signals can be used to actuate the specific
396 * operation.
397 * - In hardware, the -button signals are connected to the -control
398 * signals through drivers with the -control signals being
399 * protected through diodes.
400 */
401&gpio {
402 status = "okay";
403 gpio-line-names =
404 /*A0*/ "",
405 /*A1*/ "",
406 /*A2*/ "led-identify", /* in/out: BMC_IDLED_ON_N */
407 /*A3*/ "",
408 /*A4*/ "",
409 /*A5*/ "",
410 /*A6*/ "",
411 /*A7*/ "",
412 /*B0-B7*/ "","","","","","","","",
413 /*C0*/ "",
414 /*C1*/ "",
415 /*C2*/ "",
416 /*C3*/ "",
417 /*C4*/ "id-button", /* in/out: BMC_IDBTN_IN_OUT_N */
418 /*C5*/ "post-complete", /* in: FM_BIOS_POST_CMPLT_N */
419 /*C6*/ "",
420 /*C7*/ "",
421 /*D0*/ "",
422 /*D1*/ "",
423 /*D2*/ "power-chassis-good", /* in: SYS_PWROK_BUF */
424 /*D3*/ "platform-reset", /* in: SYS_PLTRST_N */
425 /*D4*/ "",
426 /*D5*/ "",
427 /*D6*/ "",
428 /*D7*/ "",
429 /*E0*/ "power-button", /* in: BMC_PWBTN_IN_N */
430 /*E1*/ "power-chassis-control", /* out: BMC_PWRBTN_OUT_N */
431 /*E2*/ "reset-button", /* in: BMC_RSTBTN_IN_N */
432 /*E3*/ "reset-control", /* out: BMC_RSTBTN_OUT_N */
433 /*E4*/ "nmi-button", /* in: BMC_NMIBTN_IN_N */
434 /*E5*/ "nmi-control", /* out: BMC_NMIBTN_OUT_N */
435 /*E6*/ "",
436 /*E7*/ "led-heartbeat", /* out: BMC_HEARTBRAT_LED_N */
437 /*F0*/ "",
438 /*F1*/ "clear-cmos-control", /* out: BMC_CLR_CMOS_N */
439 /*F2*/ "",
440 /*F3*/ "",
441 /*F4*/ "led-fault", /* out: AST_HW_FAULT_N */
442 /*F5*/ "",
443 /*F6*/ "",
444 /*F7*/ "",
445 /*G0*/ "BMC_PE_SMB_EN_1_N", /* out */
446 /*G1*/ "BMC_PE_SMB_EN_2_N", /* out */
447 /*G2*/ "",
448 /*G3*/ "",
449 /*G4*/ "",
450 /*G5*/ "",
451 /*G6*/ "",
452 /*G7*/ "",
453 /*H0-H7*/ "","","","","","","","",
454 /*I0-I7*/ "","","","","","","","",
455 /*J0-J7*/ "","","","","","","","",
456 /*K0-K7*/ "","","","","","","","",
457 /*L0-L7*/ "","","","","","","","",
458 /*M0-M7*/ "","","","","","","","",
459 /*N0-N7*/ "","","","","","","","",
460 /*O0-O7*/ "","","","","","","","",
461 /*P0-P7*/ "","","","","","","","",
462 /*Q0*/ "",
463 /*Q1*/ "",
464 /*Q2*/ "",
465 /*Q3*/ "",
466 /*Q4*/ "BMC_PE_SMB_SW_BIT0", /* out */
467 /*Q5*/ "BMC_PE_SMB_SW_BIT1", /* out */
468 /*Q6*/ "",
469 /*Q7*/ "",
470 /*R0-R7*/ "","","","","","","","",
471 /*S0-S7*/ "","","","","","","","",
472 /*T0-T7*/ "","","","","","","","",
473 /*U0-U7*/ "","","","","","","","",
474 /*V0-V7*/ "","","","","","","","",
475 /*W0-W7*/ "","","","","","","","",
476 /*X0-X7*/ "","","","","","","","",
477 /*Y0-Y7*/ "","","","","","","","",
478 /*Z0-Z7*/ "","","","","","","","",
479 /*AA0*/ "",
480 /*AA1*/ "",
481 /*AA2*/ "",
482 /*AA3*/ "BMC_SMB3_PCH_IE_SML3_EN", /* out */
483 /*AA4*/ "",
484 /*AA5*/ "",
485 /*AA6*/ "",
486 /*AA7*/ "",
487 /*AB0-AB7*/ "","","","","","","","";
488};
arch/arm/boot/dts/aspeed-g4.dtsi+6−0
@@ -383,6 +383,12 @@ · 382 unmodified lines
383 interrupts = <8>;383 interrupts = <8>;
384 status = "disabled";384 status = "disabled";
385 };385 };
386
387 uart_routing: uart-routing@9c {
388 compatible = "aspeed,ast2400-uart-routing";
389 reg = <0x9c 0x4>;
390 status = "disabled";
391 };
386 };392 };
387 393
388 uart2: serial@1e78d000 {394 uart2: serial@1e78d000 {
arch/arm/boot/dts/aspeed-g5.dtsi+6−0
@@ -491,6 +491,12 @@ · 490 unmodified lines
491 #reset-cells = <1>;491 #reset-cells = <1>;
492 };492 };
493 493
494 uart_routing: uart-routing@9c {
495 compatible = "aspeed,ast2500-uart-routing";
496 reg = <0x9c 0x4>;
497 status = "disabled";
498 };
499
494 lhc: lhc@a0 {500 lhc: lhc@a0 {
495 compatible = "aspeed,ast2500-lhc";501 compatible = "aspeed,ast2500-lhc";
496 reg = <0xa0 0x24 0xc8 0x8>;502 reg = <0xa0 0x24 0xc8 0x8>;
arch/arm/boot/dts/aspeed-g6.dtsi+26−0
@@ -364,6 +364,26 @@ · 363 unmodified lines
364 status = "disabled";364 status = "disabled";
365 };365 };
366 366
367 adc0: adc@1e6e9000 {
368 compatible = "aspeed,ast2600-adc0";
369 reg = <0x1e6e9000 0x100>;
370 clocks = <&syscon ASPEED_CLK_APB2>;
371 resets = <&syscon ASPEED_RESET_ADC>;
372 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
373 #io-channel-cells = <1>;
374 status = "disabled";
375 };
376
377 adc1: adc@1e6e9100 {
378 compatible = "aspeed,ast2600-adc1";
379 reg = <0x1e6e9100 0x100>;
380 clocks = <&syscon ASPEED_CLK_APB2>;
381 resets = <&syscon ASPEED_RESET_ADC>;
382 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
383 #io-channel-cells = <1>;
384 status = "disabled";
385 };
386
367 gpio0: gpio@1e780000 {387 gpio0: gpio@1e780000 {
368 #gpio-cells = <2>;388 #gpio-cells = <2>;
369 gpio-controller;389 gpio-controller;
@@ -551,6 +571,12 @@ · 181 unmodified lines
551 #reset-cells = <1>;571 #reset-cells = <1>;
552 };572 };
553 573
574 uart_routing: uart-routing@98 {
575 compatible = "aspeed,ast2600-uart-routing";
576 reg = <0x98 0x8>;
577 status = "disabled";
578 };
579
554 ibt: ibt@140 {580 ibt: ibt@140 {
555 compatible = "aspeed,ast2600-ibt-bmc";581 compatible = "aspeed,ast2600-ibt-bmc";
556 reg = <0x140 0x18>;582 reg = <0x140 0x18>;
arch/arm/boot/dts/at91-lmu5000.dts+147−0
@@ -0,0 +1,147 @@
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Device Tree file for CalAmp LMU5000 board
4 *
5 * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
6 */
7
8/dts-v1/;
9#include "at91sam9g20.dtsi"
10
11/ {
12 model = "CalAmp LMU5000";
13 compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
14
15 chosen {
16 bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
17 };
18
19 memory {
20 reg = <0x20000000 0x4000000>;
21 };
22
23 clocks {
24 #address-cells = <1>;
25 #size-cells = <1>;
26 ranges;
27
28 main_clock: clock@0 {
29 compatible = "atmel,osc", "fixed-clock";
30 clock-frequency = <18432000>;
31 };
32 };
33};
34
35&dbgu {
36 status = "okay";
37};
38
39&ebi {
40 status = "okay";
41
42 nand_controller: nand-controller {
43 pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
44 pinctrl-names = "default";
45 status = "okay";
46
47 nand@3 {
48 reg = <0x3 0x0 0x800000>;
49 rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
50 cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
51 nand-bus-width = <8>;
52 nand-ecc-mode = "soft";
53 nand-on-flash-bbt;
54 label = "atmel_nand";
55 status = "okay";
56
57 partitions {
58 compatible = "fixed-partitions";
59 #address-cells = <1>;
60 #size-cells = <1>;
61
62 kernel@0 {
63 label = "kernel";
64 reg = <0x0 0x400000>;
65 };
66
67 rootfs@400000 {
68 label = "rootfs";
69 reg = <0x400000 0x3C00000>;
70 };
71
72 user1@4000000 {
73 label = "user1";
74 reg = <0x4000000 0x2000000>;
75 };
76
77 user2@6000000 {
78 label = "user2";
79 reg = <0x6000000 0x2000000>;
80 };
81 };
82 };
83 };
84};
85
86&macb0 {
87 phy-mode = "mii";
88 status = "okay";
89};
90
91&pinctrl {
92 board {
93 pinctrl_pck0_as_mck: pck0_as_mck {
94 atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
95 };
96 };
97
98 usb0 {
99 pinctrl_usb1_vbus_gpio: usb0_vbus_gpio {
100 atmel,pins = <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
101 };
102 };
103};
104
105&ssc0 {
106 status = "okay";
107 pinctrl-0 = <&pinctrl_ssc0_tx>;
108};
109
110&uart0 {
111 status = "okay";
112};
113
114&uart1 {
115 status = "okay";
116};
117
118&usart0 {
119 pinctrl-0 =
120 <&pinctrl_usart0
121 &pinctrl_usart0_rts
122 &pinctrl_usart0_cts
123 &pinctrl_usart0_dtr_dsr
124 &pinctrl_usart0_dcd
125 &pinctrl_usart0_ri>;
126 status = "okay";
127};
128
129&usart2 {
130 status = "okay";
131};
132
133&usb0 {
134 num-ports = <2>;
135 status = "okay";
136};
137
138&usb1 {
139 pinctrl-names = "default";
140 pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
141 atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
142 status = "okay";
143};
144
145&watchdog {
146 status = "okay";
147};
arch/arm/boot/dts/at91-q5xr5.dts+199−0
@@ -0,0 +1,199 @@
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Device Tree file for Exegin Q5xR5 board
4 *
5 * Copyright (C) 2014 Owen Kirby <osk@exegin.com>
6 */
7
8/dts-v1/;
9#include "at91sam9g20.dtsi"
10
11/ {
12 model = "Exegin Q5x (rev5)";
13 compatible = "exegin,q5xr5", "atmel,at91sam9g20", "atmel,at91sam9";
14
15 chosen {
16 bootargs = "console=ttyS0,115200 rootfstype=squashfs,jffs2";
17 };
18
19 memory {
20 reg = <0x20000000 0x0>;
21 };
22
23 clocks {
24 #address-cells = <1>;
25 #size-cells = <1>;
26 ranges;
27
28 main_clock: clock@0 {
29 compatible = "atmel,osc", "fixed-clock";
30 clock-frequency = <18432000>;
31 };
32
33 slow_xtal {
34 clock-frequency = <32768>;
35 };
36
37 main_xtal {
38 clock-frequency = <18432000>;
39 };
40 };
41};
42
43&dbgu {
44 status = "okay";
45};
46
47&ebi {
48 status = "okay";
49
50 flash: flash@0 {
51 compatible = "cfi-flash";
52 #address-cells = <1>;
53 #size-cells = <1>;
54 reg = <0x0 0x1000000 0x800000>;
55 bank-width = <2>;
56
57 partitions {
58 compatible = "fixed-partitions";
59 #address-cells = <1>;
60 #size-cells = <1>;
61
62 kernel@0 {
63 label = "kernel";
64 reg = <0x0 0x200000>;
65 };
66
67 rootfs@200000 {
68 label = "rootfs";
69 reg = <0x200000 0x600000>;
70 };
71 };
72 };
73};
74
75&macb0 {
76 phy-mode = "mii";
77 status = "okay";
78};
79
80&pinctrl {
81 board {
82 pinctrl_pck0_as_mck: pck0_as_mck {
83 atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
84 };
85 };
86
87 spi0 {
88 pinctrl_spi0: spi0-0 {
89 atmel,pins =
90 <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
91 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
92 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
93 };
94
95 pinctrl_spi0_npcs0: spi0_npcs0 {
96 atmel,pins = <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
97 };
98
99 pinctrl_spi0_npcs1: spi0_npcs1 {
100 atmel,pins = <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
101 };
102 };
103
104 spi1 {
105 pinctrl_spi1: spi1-0 {
106 atmel,pins =
107 <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE
108 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE
109 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
110 };
111
112 pinctrl_spi1_npcs0: spi1_npcs0 {
113 atmel,pins = <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
114 };
115
116 pinctrl_spi1_npcs1: spi1_npcs1 {
117 atmel,pins = <AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
118 };
119 };
120};
121
122&spi0 {
123 pinctrl-names = "default";
124 pinctrl-0 = <&pinctrl_spi0 &pinctrl_spi0_npcs0 &pinctrl_spi0_npcs1>;
125 cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
126 status = "okay";
127
128 m25p80@0 {
129 compatible = "jedec,spi-nor";
130 spi-max-frequency = <20000000>;
131 reg = <0>;
132 #address-cells = <1>;
133 #size-cells = <1>;
134
135 at91boot@0 {
136 label = "at91boot";
137 reg = <0x0 0x4000>;
138 };
139
140 uenv@4000 {
141 label = "uboot-env";
142 reg = <0x4000 0x4000>;
143 };
144
145 uboot@8000 {
146 label = "uboot";
147 reg = <0x8000 0x3E000>;
148 };
149 };
150
151 spidev@1 {
152 compatible = "spidev";
153 spi-max-frequency = <2000000>;
154 reg = <1>;
155 };
156};
157
158&spi1 {
159 pinctrl-names = "default";
160 pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>;
161 cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>;
162 status = "okay";
163
164 spidev@0 {
165 compatible = "spidev";
166 spi-max-frequency = <2000000>;
167 reg = <0>;
168 };
169
170 spidev@1 {
171 compatible = "spidev";
172 spi-max-frequency = <2000000>;
173 reg = <1>;
174 };
175};
176
177&usart0 {
178 pinctrl-0 =
179 <&pinctrl_usart0
180 &pinctrl_usart0_rts
181 &pinctrl_usart0_cts
182 &pinctrl_usart0_dtr_dsr
183 &pinctrl_usart0_dcd
184 &pinctrl_usart0_ri>;
185 status = "okay";
186};
187
188&usb0 {
189 num-ports = <2>;
190 status = "okay";
191};
192
193&usb1 {
194 status = "okay";
195};
196
197&watchdog {
198 status = "okay";
199};
arch/arm/boot/dts/at91-sama5d27_som1.dtsi+11−1
@@ -8,6 +8,7 @@ · 7 unmodified lines
8 */8 */
9#include "sama5d2.dtsi"9#include "sama5d2.dtsi"
10#include "sama5d2-pinfunc.h"10#include "sama5d2-pinfunc.h"
11#include <dt-bindings/gpio/gpio.h>
11 12
12/ {13/ {
13 model = "Atmel SAMA5D27 SoM1";14 model = "Atmel SAMA5D27 SoM1";
@@ -95,8 +96,11 @@ · 81 unmodified lines
95 96
96 i2c0: i2c@f8028000 {97 i2c0: i2c@f8028000 {
97 dmas = <0>, <0>;98 dmas = <0>, <0>;
98 pinctrl-names = "default";99 pinctrl-names = "default", "gpio";
99 pinctrl-0 = <&pinctrl_i2c0_default>;100 pinctrl-0 = <&pinctrl_i2c0_default>;
101 pinctrl-1 = <&pinctrl_i2c0_gpio>;
102 sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
103 scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
100 status = "okay";104 status = "okay";
101 105
102 at24@50 {106 at24@50 {
@@ -113,6 +117,12 @@ · 10 unmodified lines
113 bias-disable;117 bias-disable;
114 };118 };
115 119
120 pinctrl_i2c0_gpio: i2c0_gpio {
121 pinmux = <PIN_PD21__GPIO>,
122 <PIN_PD22__GPIO>;
123 bias-disable;
124 };
125
116 pinctrl_qspi1_default: qspi1_default {126 pinctrl_qspi1_default: qspi1_default {
117 sck_cs {127 sck_cs {
118 pinmux = <PIN_PB5__QSPI1_SCK>,128 pinmux = <PIN_PB5__QSPI1_SCK>,
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts+21−2
@@ -130,8 +130,11 @@ · 129 unmodified lines
130 i2c-analog-filter;130 i2c-analog-filter;
131 i2c-digital-filter;131 i2c-digital-filter;
132 i2c-digital-filter-width-ns = <35>;132 i2c-digital-filter-width-ns = <35>;
133 pinctrl-names = "default";133 pinctrl-names = "default", "gpio";
134 pinctrl-0 = <&pinctrl_mikrobus_i2c>;134 pinctrl-0 = <&pinctrl_mikrobus_i2c>;
135 pinctrl-1 = <&pinctrl_i2c3_gpio>;
136 sda-gpios = <&pioA PIN_PA24 GPIO_ACTIVE_HIGH>;
137 scl-gpios = <&pioA PIN_PA23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
135 status = "okay";138 status = "okay";
136 };139 };
137 };140 };
@@ -215,8 +218,11 @@ · 77 unmodified lines
215 i2c-analog-filter;218 i2c-analog-filter;
216 i2c-digital-filter;219 i2c-digital-filter;
217 i2c-digital-filter-width-ns = <35>;220 i2c-digital-filter-width-ns = <35>;
218 pinctrl-names = "default";221 pinctrl-names = "default", "gpio";
219 pinctrl-0 = <&pinctrl_i2c1_default>;222 pinctrl-0 = <&pinctrl_i2c1_default>;
223 pinctrl-1 = <&pinctrl_i2c1_gpio>;
224 sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
225 scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
220 status = "okay";226 status = "okay";
221 };227 };
222 228
@@ -252,6 +258,13 @@ · 29 unmodified lines
252 bias-disable;258 bias-disable;
253 };259 };
254 260
261 pinctrl_i2c1_gpio: i2c1_gpio {
262 pinmux = <PIN_PD4__GPIO>,
263 <PIN_PD5__GPIO>;
264 bias-disable;
265 };
266
267
255 pinctrl_isc_base: isc_base {268 pinctrl_isc_base: isc_base {
256 pinmux = <PIN_PC21__ISC_PCK>,269 pinmux = <PIN_PC21__ISC_PCK>,
257 <PIN_PC22__ISC_VSYNC>,270 <PIN_PC22__ISC_VSYNC>,
@@ -441,6 +454,12 @@ · 183 unmodified lines
441 bias-disable;454 bias-disable;
442 };455 };
443 456
457 pinctrl_i2c3_gpio: i2c3_gpio {
458 pinmux = <PIN_PA24__GPIO>,
459 <PIN_PA23__GPIO>;
460 bias-disable;
461 };
462
444 pinctrl_flx4_default: flx4_uart_default {463 pinctrl_flx4_default: flx4_uart_default {
445 pinmux = <PIN_PC28__FLEXCOM4_IO0>,464 pinmux = <PIN_PC28__FLEXCOM4_IO0>,
446 <PIN_PC29__FLEXCOM4_IO1>,465 <PIN_PC29__FLEXCOM4_IO1>,
arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi+70−0
@@ -30,6 +30,14 @@ · 29 unmodified lines
30 clock-frequency = <24000000>;30 clock-frequency = <24000000>;
31 };31 };
32 };32 };
33
34 wifi_pwrseq: wifi_pwrseq {
35 compatible = "mmc-pwrseq-wilc1000";
36 reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
37 powerdown-gpios = <&pioA PIN_PA29 GPIO_ACTIVE_HIGH>;
38 pinctrl-0 = <&pinctrl_wilc_pwrseq>;
39 pinctrl-names = "default";
40 };
33};41};
34 42
35&flx1 {43&flx1 {
@@ -310,5 +318,67 @@ · 274 unmodified lines
310 <PIN_PB10__QSPI1_IO3>;318 <PIN_PB10__QSPI1_IO3>;
311 bias-pull-up;319 bias-pull-up;
312 };320 };
321
322 pinctrl_sdmmc1_default: sdmmc1_default {
323 cmd-data {
324 pinmux = <PIN_PA28__SDMMC1_CMD>,
325 <PIN_PA18__SDMMC1_DAT0>,
326 <PIN_PA19__SDMMC1_DAT1>,
327 <PIN_PA20__SDMMC1_DAT2>,
328 <PIN_PA21__SDMMC1_DAT3>;
329 bias-disable;
330 };
331
332 conf-ck {
333 pinmux = <PIN_PA22__SDMMC1_CK>;
334 bias-disable;
335 };
336 };
337
338 pinctrl_wilc_default: wilc_default {
339 conf-irq {
340 pinmux = <PIN_PB25__GPIO>;
341 bias-disable;
342 };
343 };
344
345 pinctrl_wilc_pwrseq: wilc_pwrseq {
346 conf-ce-nrst {
347 pinmux = <PIN_PA27__GPIO>,
348 <PIN_PA29__GPIO>;
349 bias-disable;
350 };
351
352 conf-rtcclk {
353 pinmux = <PIN_PB13__PCK1>;
354 bias-disable;
355 };
356 };
357};
358
359&sdmmc1 {
360 #address-cells = <1>;
361 #size-cells = <0>;
362 bus-width = <4>;
363 pinctrl-names = "default";
364 pinctrl-0 = <&pinctrl_sdmmc1_default>;
365 mmc-pwrseq = <&wifi_pwrseq>;
366 no-1-8-v;
367 non-removable;
368 bus-width = <4>;
369 status = "okay";
370
371 wilc: wifi@0 {
372 reg = <0>;
373 compatible = "microchip,wilc1000";
374 pinctrl-names = "default";
375 pinctrl-0 = <&pinctrl_wilc_default>;
376 clocks = <&pmc PMC_TYPE_SYSTEM 9>;
377 clock-names = "rtc";
378 interrupts = <PIN_PB25 IRQ_TYPE_NONE>;
379 interrupt-parent = <&pioA>;
380 assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
381 assigned-clock-rates = <32768>;
382 };
313};383};
314 384
arch/arm/boot/dts/at91-sama5d2_icp.dts+20−2
@@ -307,8 +307,11 @@ · 306 unmodified lines
307};307};
308 308
309&i2c0 { /* mikrobus i2c */309&i2c0 { /* mikrobus i2c */
310 pinctrl-names = "default";310 pinctrl-names = "default", "gpio";
311 pinctrl-0 = <&pinctrl_mikrobus_i2c>;311 pinctrl-0 = <&pinctrl_mikrobus_i2c>;
312 pinctrl-1 = <&pinctrl_i2c0_gpio>;
313 sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
314 scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
312 i2c-digital-filter;315 i2c-digital-filter;
313 i2c-digital-filter-width-ns = <35>;316 i2c-digital-filter-width-ns = <35>;
314 status = "okay";317 status = "okay";
@@ -316,8 +319,11 @@ · 1 unmodified line
316 319
317&i2c1 {320&i2c1 {
318 dmas = <0>, <0>;321 dmas = <0>, <0>;
319 pinctrl-names = "default";322 pinctrl-names = "default", "gpio";
320 pinctrl-0 = <&pinctrl_i2c1_default>;323 pinctrl-0 = <&pinctrl_i2c1_default>;
324 pinctrl-1 = <&pinctrl_i2c1_gpio>;
325 sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
326 scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
321 i2c-digital-filter;327 i2c-digital-filter;
322 i2c-digital-filter-width-ns = <35>;328 i2c-digital-filter-width-ns = <35>;
323 status = "okay";329 status = "okay";
@@ -402,6 +408,12 @@ · 78 unmodified lines
402 bias-disable;408 bias-disable;
403 };409 };
404 410
411 pinctrl_i2c1_gpio: i2c1_gpio {
412 pinmux = <PIN_PD19__GPIO>,
413 <PIN_PD20__GPIO>;
414 bias-disable;
415 };
416
405 pinctrl_key_gpio_default: key_gpio_default {417 pinctrl_key_gpio_default: key_gpio_default {
406 pinmux = <PIN_PD0__GPIO>;418 pinmux = <PIN_PD0__GPIO>;
407 bias-pull-up;419 bias-pull-up;
@@ -463,6 +475,12 @@ · 55 unmodified lines
463 bias-disable;475 bias-disable;
464 };476 };
465 477
478 pinctrl_i2c0_gpio: i2c0_gpio {
479 pinmux = <PIN_PD21__GPIO>,
480 <PIN_PD22__GPIO>;
481 bias-disable;
482 };
483
466 pinctrl_mikrobus1_an: mikrobus1_an {484 pinctrl_mikrobus1_an: mikrobus1_an {
467 pinmux = <PIN_PD26__GPIO>;485 pinmux = <PIN_PD26__GPIO>;
468 bias-disable;486 bias-disable;
arch/arm/boot/dts/at91-sama7g5ek.dts+20−0
@@ -122,6 +122,14 @@ · 121 unmodified lines
122 };122 };
123};123};
124 124
125&adc {
126 vddana-supply = <&vddout25>;
127 vref-supply = <&vddout25>;
128 pinctrl-names = "default";
129 pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
130 status = "okay";
131};
132
125&cpu0 {133&cpu0 {
126 cpu-supply = <&vddcpu>;134 cpu-supply = <&vddcpu>;
127};135};
@@ -679,6 +687,18 @@ · 551 unmodified lines
679 status = "okay";687 status = "okay";
680};688};
681 689
690&tcb0 {
691 timer0: timer@0 {
692 compatible = "atmel,tcb-timer";
693 reg = <0>;
694 };
695
696 timer1: timer@1 {
697 compatible = "atmel,tcb-timer";
698 reg = <1>;
699 };
700};
701
682&trng {702&trng {
683 status = "okay";703 status = "okay";
684};704};
arch/arm/boot/dts/at91-tse850-3.dts+1−1
@@ -262,7 +262,7 @@ · 261 unmodified lines
262&macb1 {262&macb1 {
263 status = "okay";263 status = "okay";
264 264
265 phy-mode = "rgmii";265 phy-mode = "rmii";
266 266
267 #address-cells = <1>;267 #address-cells = <1>;
268 #size-cells = <0>;268 #size-cells = <0>;
arch/arm/boot/dts/at91sam9260.dtsi+1−1
@@ -166,7 +166,7 @@ · 165 unmodified lines
166 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";166 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
167 };167 };
168 168
169 pinctrl@fffff400 {169 pinctrl: pinctrl@fffff400 {
170 #address-cells = <1>;170 #address-cells = <1>;
171 #size-cells = <1>;171 #size-cells = <1>;
172 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";172 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
arch/arm/boot/dts/axp209.dtsi+3−3
@@ -53,7 +53,7 @@ · 52 unmodified lines
53 interrupt-controller;53 interrupt-controller;
54 #interrupt-cells = <1>;54 #interrupt-cells = <1>;
55 55
56 ac_power_supply: ac-power-supply {56 ac_power_supply: ac-power {
57 compatible = "x-powers,axp202-ac-power-supply";57 compatible = "x-powers,axp202-ac-power-supply";
58 status = "disabled";58 status = "disabled";
59 };59 };
@@ -69,7 +69,7 @@ · 9 unmodified lines
69 #gpio-cells = <2>;69 #gpio-cells = <2>;
70 };70 };
71 71
72 battery_power_supply: battery-power-supply {72 battery_power_supply: battery-power {
73 compatible = "x-powers,axp209-battery-power-supply";73 compatible = "x-powers,axp209-battery-power-supply";
74 status = "disabled";74 status = "disabled";
75 };75 };
@@ -112,7 +112,7 @@ · 36 unmodified lines
112 };112 };
113 };113 };
114 114
115 usb_power_supply: usb-power-supply {115 usb_power_supply: usb-power {
116 compatible = "x-powers,axp202-usb-power-supply";116 compatible = "x-powers,axp202-usb-power-supply";
117 status = "disabled";117 status = "disabled";
118 };118 };
arch/arm/boot/dts/axp22x.dtsi+3−3
@@ -52,7 +52,7 @@ · 51 unmodified lines
52 interrupt-controller;52 interrupt-controller;
53 #interrupt-cells = <1>;53 #interrupt-cells = <1>;
54 54
55 ac_power_supply: ac-power-supply {55 ac_power_supply: ac-power {
56 compatible = "x-powers,axp221-ac-power-supply";56 compatible = "x-powers,axp221-ac-power-supply";
57 status = "disabled";57 status = "disabled";
58 };58 };
@@ -62,7 +62,7 @@ · 3 unmodified lines
62 #io-channel-cells = <1>;62 #io-channel-cells = <1>;
63 };63 };
64 64
65 battery_power_supply: battery-power-supply {65 battery_power_supply: battery-power {
66 compatible = "x-powers,axp221-battery-power-supply";66 compatible = "x-powers,axp221-battery-power-supply";
67 status = "disabled";67 status = "disabled";
68 };68 };
@@ -163,7 +163,7 @@ · 94 unmodified lines
163 };163 };
164 };164 };
165 165
166 usb_power_supply: usb_power_supply {166 usb_power_supply: usb-power {
167 compatible = "x-powers,axp221-usb-power-supply";167 compatible = "x-powers,axp221-usb-power-supply";
168 status = "disabled";168 status = "disabled";
169 };169 };
arch/arm/boot/dts/axp81x.dtsi+5−5
@@ -48,7 +48,7 @@ · 47 unmodified lines
48 interrupt-controller;48 interrupt-controller;
49 #interrupt-cells = <1>;49 #interrupt-cells = <1>;
50 50
51 ac_power_supply: ac-power-supply {51 ac_power_supply: ac-power {
52 compatible = "x-powers,axp813-ac-power-supply";52 compatible = "x-powers,axp813-ac-power-supply";
53 status = "disabled";53 status = "disabled";
54 };54 };
@@ -63,18 +63,18 @@ · 8 unmodified lines
63 gpio-controller;63 gpio-controller;
64 #gpio-cells = <2>;64 #gpio-cells = <2>;
65 65
66 gpio0_ldo: gpio0-ldo {66 gpio0_ldo: gpio0-ldo-pin {
67 pins = "GPIO0";67 pins = "GPIO0";
68 function = "ldo";68 function = "ldo";
69 };69 };
70 70
71 gpio1_ldo: gpio1-ldo {71 gpio1_ldo: gpio1-ldo-pin {
72 pins = "GPIO1";72 pins = "GPIO1";
73 function = "ldo";73 function = "ldo";
74 };74 };
75 };75 };
76 76
77 battery_power_supply: battery-power-supply {77 battery_power_supply: battery-power {
78 compatible = "x-powers,axp813-battery-power-supply";78 compatible = "x-powers,axp813-battery-power-supply";
79 status = "disabled";79 status = "disabled";
80 };80 };
@@ -172,7 +172,7 @@ · 91 unmodified lines
172 };172 };
173 };173 };
174 174
175 usb_power_supply: usb-power-supply {175 usb_power_supply: usb-power {
176 compatible = "x-powers,axp813-usb-power-supply";176 compatible = "x-powers,axp813-usb-power-supply";
177 };177 };
178};178};
arch/arm/boot/dts/bcm-nsp-ax.dtsi+70−0
@@ -0,0 +1,70 @@
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Broadcom Northstar Plus Ax stepping-specific bindings.
4 * Notable differences from B0+ are the secondary-boot-reg and
5 * lack of DMA coherency.
6 */
7
8&cpu1 {
9 secondary-boot-reg = <0xffff042c>;
10};
11
12&dma {
13 /delete-property/ dma-coherent;
14};
15
16&sdio {
17 /delete-property/ dma-coherent;
18};
19
20&amac0 {
21 /delete-property/ dma-coherent;
22};
23
24&amac1 {
25 /delete-property/ dma-coherent;
26};
27
28&amac2 {
29 /delete-property/ dma-coherent;
30};
31
32&ehci0 {
33 /delete-property/ dma-coherent;
34};
35
36&mailbox {
37 /delete-property/ dma-coherent;
38};
39
40&xhci {
41 /delete-property/ dma-coherent;
42};
43
44&ehci0 {
45 /delete-property/ dma-coherent;
46};
47
48&ohci0 {
49 /delete-property/ dma-coherent;
50};
51
52&i2c0 {
53 /delete-property/ dma-coherent;
54};
55
56&sata {
57 /delete-property/ dma-coherent;
58};
59
60&pcie0 {
61 /delete-property/ dma-coherent;
62};
63
64&pcie1 {
65 /delete-property/ dma-coherent;
66};
67
68&pcie2 {
69 /delete-property/ dma-coherent;
70};
arch/arm/boot/dts/bcm-nsp.dtsi+42−10
@@ -77,7 +77,7 @@ · 76 unmodified lines
77 interrupt-affinity = <&cpu0>, <&cpu1>;77 interrupt-affinity = <&cpu0>, <&cpu1>;
78 };78 };
79 79
80 mpcore@19000000 {80 mpcore-bus@19000000 {
81 compatible = "simple-bus";81 compatible = "simple-bus";
82 ranges = <0x00000000 0x19000000 0x00023000>;82 ranges = <0x00000000 0x19000000 0x00023000>;
83 #address-cells = <1>;83 #address-cells = <1>;
@@ -166,7 +166,7 @@ · 82 unmodified lines
166 };166 };
167 };167 };
168 168
169 axi@18000000 {169 axi: axi@18000000 {
170 compatible = "simple-bus";170 compatible = "simple-bus";
171 ranges = <0x00000000 0x18000000 0x0011c40c>;171 ranges = <0x00000000 0x18000000 0x0011c40c>;
172 #address-cells = <1>;172 #address-cells = <1>;
@@ -219,7 +219,7 @@ · 46 unmodified lines
219 status = "disabled";219 status = "disabled";
220 };220 };
221 221
222 sdio: sdhci@21000 {222 sdio: mmc@21000 {
223 compatible = "brcm,sdhci-iproc-cygnus";223 compatible = "brcm,sdhci-iproc-cygnus";
224 reg = <0x21000 0x100>;224 reg = <0x21000 0x100>;
225 interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;225 interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
@@ -310,6 +310,7 @@ · 84 unmodified lines
310 num-cs = <2>;310 num-cs = <2>;
311 #address-cells = <1>;311 #address-cells = <1>;
312 #size-cells = <0>;312 #size-cells = <0>;
313 status = "disabled";
313 };314 };
314 315
315 xhci: usb@29000 {316 xhci: usb@29000 {
@@ -362,6 +363,42 @@ · 46 unmodified lines
362 status = "disabled";363 status = "disabled";
363 };364 };
364 365
366 mdio: mdio@32000 {
367 compatible = "brcm,iproc-mdio";
368 reg = <0x32000 0x8>;
369 #size-cells = <0>;
370 #address-cells = <1>;
371 };
372
373 mdio-mux@32000 {
374 compatible = "mdio-mux-mmioreg", "mdio-mux";
375 reg = <0x32000 0x4>;
376 mux-mask = <0x200>;
377 #address-cells = <1>;
378 #size-cells = <0>;
379 mdio-parent-bus = <&mdio>;
380
381 mdio_int: mdio@0 {
382 reg = <0x0>;
383 #address-cells = <1>;
384 #size-cells = <0>;
385
386 usb3_phy: usb3-phy@10 {
387 compatible = "brcm,ns-bx-usb3-phy";
388 reg = <0x10>;
389 usb3-dmp-syscon = <&usb3_dmp>;
390 #phy-cells = <0>;
391 status = "disabled";
392 };
393 };
394
395 mdio_ext: mdio@200 {
396 reg = <0x200>;
397 #address-cells = <1>;
398 #size-cells = <0>;
399 };
400 };
401
365 rng: rng@33000 {402 rng: rng@33000 {
366 compatible = "brcm,bcm-nsp-rng";403 compatible = "brcm,bcm-nsp-rng";
367 reg = <0x33000 0x14>;404 reg = <0x33000 0x14>;
@@ -520,13 +557,8 @@ · 152 unmodified lines
520 };557 };
521 };558 };
522 559
523 usb3_phy: usb3-phy@104000 {560 usb3_dmp: syscon@104000 {
524 compatible = "brcm,ns-bx-usb3-phy";561 reg = <0x104000 0x1000>;
525 reg = <0x104000 0x1000>,
526 <0x032000 0x1000>;
527 reg-names = "dmp", "ccb-mii";
528 #phy-cells = <0>;
529 status = "disabled";
530 };562 };
531 };563 };
532 564
arch/arm/boot/dts/bcm2711-rpi-4-b.dts+9−29
@@ -3,6 +3,7 @@ · 2 unmodified lines
3#include "bcm2711.dtsi"3#include "bcm2711.dtsi"
4#include "bcm2711-rpi.dtsi"4#include "bcm2711-rpi.dtsi"
5#include "bcm283x-rpi-usb-peripheral.dtsi"5#include "bcm283x-rpi-usb-peripheral.dtsi"
6#include "bcm283x-rpi-wifi-bt.dtsi"
6 7
7/ {8/ {
8 compatible = "raspberrypi,4-model-b", "brcm,bcm2711";9 compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
@@ -26,11 +27,6 @@ · 17 unmodified lines
26 };27 };
27 };28 };
28 29
29 wifi_pwrseq: wifi-pwrseq {
30 compatible = "mmc-pwrseq-simple";
31 reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
32 };
33
34 sd_io_1v8_reg: sd_io_1v8_reg {30 sd_io_1v8_reg: sd_io_1v8_reg {
35 compatible = "regulator-gpio";31 compatible = "regulator-gpio";
36 regulator-name = "vdd-sd-io";32 regulator-name = "vdd-sd-io";
@@ -56,6 +52,10 @@ · 19 unmodified lines
56 };52 };
57};53};
58 54
55&bt {
56 shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
57};
58
59&ddc0 {59&ddc0 {
60 status = "okay";60 status = "okay";
61};61};
@@ -178,23 +178,6 @@ · 116 unmodified lines
178 status = "okay";178 status = "okay";
179};179};
180 180
181/* SDHCI is used to control the SDIO for wireless */
182&sdhci {
183 #address-cells = <1>;
184 #size-cells = <0>;
185 pinctrl-names = "default";
186 pinctrl-0 = <&emmc_gpio34>;
187 bus-width = <4>;
188 non-removable;
189 mmc-pwrseq = <&wifi_pwrseq>;
190 status = "okay";
191
192 brcmf: wifi@1 {
193 reg = <1>;
194 compatible = "brcm,bcm4329-fmac";
195 };
196};
197
198/* EMMC2 is used to drive the SD card */181/* EMMC2 is used to drive the SD card */
199&emmc2 {182&emmc2 {
200 vqmmc-supply = <&sd_io_1v8_reg>;183 vqmmc-supply = <&sd_io_1v8_reg>;
@@ -237,13 +220,6 @@ · 36 unmodified lines
237 pinctrl-names = "default";220 pinctrl-names = "default";
238 pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;221 pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
239 uart-has-rtscts;222 uart-has-rtscts;
240 status = "okay";
241
242 bluetooth {
243 compatible = "brcm,bcm43438-bt";
244 max-speed = <2000000>;
245 shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
246 };
247};223};
248 224
249/* uart1 is mapped to the pin header */225/* uart1 is mapped to the pin header */
@@ -260,3 +236,7 @@ · 10 unmodified lines
260&vec {236&vec {
261 status = "disabled";237 status = "disabled";
262};238};
239
240&wifi_pwrseq {
241 reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
242};
arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts+138−0
@@ -0,0 +1,138 @@
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3#include "bcm2711-rpi-cm4.dtsi"
4#include "bcm283x-rpi-usb-host.dtsi"
5
6/ {
7 model = "Raspberry Pi Compute Module 4 IO Board";
8
9 leds {
10 led-act {
11 gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
12 };
13
14 led-pwr {
15 label = "PWR";
16 gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
17 default-state = "keep";
18 linux,default-trigger = "default-on";
19 };
20 };
21};
22
23&ddc0 {
24 status = "okay";
25};
26
27&ddc1 {
28 status = "okay";
29};
30
31&gpio {
32 /*
33 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
34 * the official GPU firmware DT blob.
35 *
36 * Legend:
37 * "FOO" = GPIO line named "FOO" on the schematic
38 * "FOO_N" = GPIO line named "FOO" on schematic, active low
39 */
40 gpio-line-names = "ID_SDA",
41 "ID_SCL",
42 "SDA1",
43 "SCL1",
44 "GPIO_GCLK",
45 "GPIO5",
46 "GPIO6",
47 "SPI_CE1_N",
48 "SPI_CE0_N",
49 "SPI_MISO",
50 "SPI_MOSI",
51 "SPI_SCLK",
52 "GPIO12",
53 "GPIO13",
54 /* Serial port */
55 "TXD1",
56 "RXD1",
57 "GPIO16",
58 "GPIO17",
59 "GPIO18",
60 "GPIO19",
61 "GPIO20",
62 "GPIO21",
63 "GPIO22",
64 "GPIO23",
65 "GPIO24",
66 "GPIO25",
67 "GPIO26",
68 "GPIO27",
69 "RGMII_MDIO",
70 "RGMIO_MDC",
71 /* Used by BT module */
72 "CTS0",
73 "RTS0",
74 "TXD0",
75 "RXD0",
76 /* Used by Wifi */
77 "SD1_CLK",
78 "SD1_CMD",
79 "SD1_DATA0",
80 "SD1_DATA1",
81 "SD1_DATA2",
82 "SD1_DATA3",
83 /* Shared with SPI flash */
84 "PWM0_MISO",
85 "PWM1_MOSI",
86 "STATUS_LED_G_CLK",
87 "SPIFLASH_CE_N",
88 "SDA0",
89 "SCL0",
90 "RGMII_RXCLK",
91 "RGMII_RXCTL",
92 "RGMII_RXD0",
93 "RGMII_RXD1",
94 "RGMII_RXD2",
95 "RGMII_RXD3",
96 "RGMII_TXCLK",
97 "RGMII_TXCTL",
98 "RGMII_TXD0",
99 "RGMII_TXD1",
100 "RGMII_TXD2",
101 "RGMII_TXD3";
102};
103
104&hdmi0 {
105 status = "okay";
106};
107
108&hdmi1 {
109 status = "okay";
110};
111
112&genet {
113 status = "okay";
114};
115
116&pixelvalve0 {
117 status = "okay";
118};
119
120&pixelvalve1 {
121 status = "okay";
122};
123
124&pixelvalve2 {
125 status = "okay";
126};
127
128&pixelvalve4 {
129 status = "okay";
130};
131
132&vc4 {
133 status = "okay";
134};
135
136&vec {
137 status = "disabled";
138};
arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi+113−0
@@ -0,0 +1,113 @@
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3#include "bcm2711.dtsi"
4#include "bcm2711-rpi.dtsi"
5#include "bcm283x-rpi-wifi-bt.dtsi"
6
7/ {
8 compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
9
10 chosen {
11 /* 8250 auxiliary UART instead of pl011 */
12 stdout-path = "serial1:115200n8";
13 };
14
15 sd_io_1v8_reg: sd_io_1v8_reg {
16 compatible = "regulator-gpio";
17 regulator-name = "vdd-sd-io";
18 regulator-min-microvolt = <1800000>;
19 regulator-max-microvolt = <3300000>;
20 regulator-boot-on;
21 regulator-always-on;
22 regulator-settling-time-us = <5000>;
23 gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
24 states = <1800000 0x1>,
25 <3300000 0x0>;
26 status = "okay";
27 };
28
29 sd_vcc_reg: sd_vcc_reg {
30 compatible = "regulator-fixed";
31 regulator-name = "vcc-sd";
32 regulator-min-microvolt = <3300000>;
33 regulator-max-microvolt = <3300000>;
34 regulator-boot-on;
35 enable-active-high;
36 gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
37 };
38};
39
40&bt {
41 shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
42};
43
44/* EMMC2 is used to drive the eMMC */
45&emmc2 {
46 bus-width = <8>;
47 vqmmc-supply = <&sd_io_1v8_reg>;
48 vmmc-supply = <&sd_vcc_reg>;
49 broken-cd;
50 /* Even the IP block is limited to 100 MHz
51 * this provides a throughput gain
52 */
53 mmc-hs200-1_8v;
54 status = "okay";
55};
56
57&expgpio {
58 gpio-line-names = "BT_ON",
59 "WL_ON",
60 "PWR_LED_OFF",
61 "ANT1",
62 "VDD_SD_IO_SEL",
63 "CAM_GPIO",
64 "SD_PWR_ON",
65 "ANT2";
66
67 ant1: ant1-hog {
68 gpio-hog;
69 gpios = <3 GPIO_ACTIVE_HIGH>;
70 /* internal antenna enabled */
71 output-high;
72 line-name = "ant1";
73 };
74
75 ant2: ant2-hog {
76 gpio-hog;
77 gpios = <7 GPIO_ACTIVE_HIGH>;
78 /* external antenna disabled */
79 output-low;
80 line-name = "ant2";
81 };
82};
83
84&genet {
85 phy-handle = <&phy1>;
86 phy-mode = "rgmii-rxid";
87 status = "okay";
88};
89
90&genet_mdio {
91 phy1: ethernet-phy@0 {
92 /* No PHY interrupt */
93 reg = <0x0>;
94 };
95};
96
97/* uart0 communicates with the BT module */
98&uart0 {
99 pinctrl-names = "default";
100 pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
101 uart-has-rtscts;
102};
103
104/* uart1 is mapped to the pin header */
105&uart1 {
106 pinctrl-names = "default";
107 pinctrl-0 = <&uart1_gpio14>;
108 status = "okay";
109};
110
111&wifi_pwrseq {
112 reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
113};
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts+8−23
@@ -7,6 +7,7 @@ · 6 unmodified lines
7#include "bcm2835.dtsi"7#include "bcm2835.dtsi"
8#include "bcm2835-rpi.dtsi"8#include "bcm2835-rpi.dtsi"
9#include "bcm283x-rpi-usb-otg.dtsi"9#include "bcm283x-rpi-usb-otg.dtsi"
10#include "bcm283x-rpi-wifi-bt.dtsi"
10 11
11/ {12/ {
12 compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";13 compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
@@ -27,11 +28,10 @@ · 14 unmodified lines
27 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;28 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
28 };29 };
29 };30 };
31};
30 32
31 wifi_pwrseq: wifi-pwrseq {33&bt {
32 compatible = "mmc-pwrseq-simple";34 shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
33 reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
34 };
35};35};
36 36
37&gpio {37&gpio {
@@ -110,19 +110,7 @@ · 72 unmodified lines
110};110};
111 111
112&sdhci {112&sdhci {
113 #address-cells = <1>;
114 #size-cells = <0>;
115 pinctrl-names = "default";
116 pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;113 pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
117 bus-width = <4>;
118 mmc-pwrseq = <&wifi_pwrseq>;
119 non-removable;
120 status = "okay";
121
122 brcmf: wifi@1 {
123 reg = <1>;
124 compatible = "brcm,bcm4329-fmac";
125 };
126};114};
127 115
128&sdhost {116&sdhost {
@@ -135,13 +123,6 @@ · 6 unmodified lines
135&uart0 {123&uart0 {
136 pinctrl-names = "default";124 pinctrl-names = "default";
137 pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;125 pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
138 status = "okay";
139
140 bluetooth {
141 compatible = "brcm,bcm43438-bt";
142 max-speed = <2000000>;
143 shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
144 };
145};126};
146 127
147&uart1 {128&uart1 {
@@ -149,3 +130,7 @@ · 1 unmodified line
149 pinctrl-0 = <&uart1_gpio14>;130 pinctrl-0 = <&uart1_gpio14>;
150 status = "okay";131 status = "okay";
151};132};
133
134&wifi_pwrseq {
135 reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
136};
arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts+7−29
@@ -3,6 +3,7 @@ · 2 unmodified lines
3#include "bcm2837.dtsi"3#include "bcm2837.dtsi"
4#include "bcm2836-rpi.dtsi"4#include "bcm2836-rpi.dtsi"
5#include "bcm283x-rpi-usb-host.dtsi"5#include "bcm283x-rpi-usb-host.dtsi"
6#include "bcm283x-rpi-wifi-bt.dtsi"
6 7
7/ {8/ {
8 compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";9 compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
@@ -130,28 +131,6 @@ · 121 unmodified lines
130 status = "okay";131 status = "okay";
131};132};
132 133
133/*
134 * SDHCI is used to control the SDIO for wireless
135 *
136 * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
137 * by a single GPIO. We can't give GPIO control to one of the drivers,
138 * otherwise the other part would get unexpectedly disturbed.
139 */
140&sdhci {
141 #address-cells = <1>;
142 #size-cells = <0>;
143 pinctrl-names = "default";
144 pinctrl-0 = <&emmc_gpio34>;
145 status = "okay";
146 bus-width = <4>;
147 non-removable;
148
149 brcmf: wifi@1 {
150 reg = <1>;
151 compatible = "brcm,bcm4329-fmac";
152 };
153};
154
155/* SDHOST is used to drive the SD card */134/* SDHOST is used to drive the SD card */
156&sdhost {135&sdhost {
157 pinctrl-names = "default";136 pinctrl-names = "default";
@@ -160,16 +139,15 @@ · 2 unmodified lines
160 bus-width = <4>;139 bus-width = <4>;
161};140};
162 141
163/* uart0 communicates with the BT module */142/* uart0 communicates with the BT module
143 *
144 * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
145 * by a single GPIO. We can't give GPIO control to one of the drivers,
146 * otherwise the other part would get unexpectedly disturbed.
147 */
164&uart0 {148&uart0 {
165 pinctrl-names = "default";149 pinctrl-names = "default";
166 pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;150 pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
167 status = "okay";
168
169 bluetooth {
170 compatible = "brcm,bcm43438-bt";
171 max-speed = <2000000>;
172 };
173};151};
174 152
175/* uart1 is mapped to the pin header */153/* uart1 is mapped to the pin header */
arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts+8−28
@@ -4,6 +4,7 @@ · 3 unmodified lines
4#include "bcm2836-rpi.dtsi"4#include "bcm2836-rpi.dtsi"
5#include "bcm283x-rpi-lan7515.dtsi"5#include "bcm283x-rpi-lan7515.dtsi"
6#include "bcm283x-rpi-usb-host.dtsi"6#include "bcm283x-rpi-usb-host.dtsi"
7#include "bcm283x-rpi-wifi-bt.dtsi"
7 8
8/ {9/ {
9 compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";10 compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
@@ -31,11 +32,10 @@ · 21 unmodified lines
31 linux,default-trigger = "default-on";32 linux,default-trigger = "default-on";
32 };33 };
33 };34 };
35};
34 36
35 wifi_pwrseq: wifi-pwrseq {37&bt {
36 compatible = "mmc-pwrseq-simple";38 shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
37 reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
38 };
39};39};
40 40
41&firmware {41&firmware {
@@ -137,23 +137,6 @@ · 95 unmodified lines
137 status = "okay";137 status = "okay";
138};138};
139 139
140/* SDHCI is used to control the SDIO for wireless */
141&sdhci {
142 #address-cells = <1>;
143 #size-cells = <0>;
144 pinctrl-names = "default";
145 pinctrl-0 = <&emmc_gpio34>;
146 status = "okay";
147 bus-width = <4>;
148 non-removable;
149 mmc-pwrseq = <&wifi_pwrseq>;
150
151 brcmf: wifi@1 {
152 reg = <1>;
153 compatible = "brcm,bcm4329-fmac";
154 };
155};
156
157/* SDHOST is used to drive the SD card */140/* SDHOST is used to drive the SD card */
158&sdhost {141&sdhost {
159 pinctrl-names = "default";142 pinctrl-names = "default";
@@ -166,13 +149,6 @@ · 6 unmodified lines
166&uart0 {149&uart0 {
167 pinctrl-names = "default";150 pinctrl-names = "default";
168 pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;151 pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
169 status = "okay";
170
171 bluetooth {
172 compatible = "brcm,bcm43438-bt";
173 max-speed = <2000000>;
174 shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
175 };
176};152};
177 153
178/* uart1 is mapped to the pin header */154/* uart1 is mapped to the pin header */
@@ -181,3 +157,7 @@ · 2 unmodified lines
181 pinctrl-0 = <&uart1_gpio14>;157 pinctrl-0 = <&uart1_gpio14>;
182 status = "okay";158 status = "okay";
183};159};
160
161&wifi_pwrseq {
162 reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
163};
arch/arm/boot/dts/bcm2837-rpi-3-b.dts+8−28
@@ -4,6 +4,7 @@ · 3 unmodified lines
4#include "bcm2836-rpi.dtsi"4#include "bcm2836-rpi.dtsi"
5#include "bcm283x-rpi-smsc9514.dtsi"5#include "bcm283x-rpi-smsc9514.dtsi"
6#include "bcm283x-rpi-usb-host.dtsi"6#include "bcm283x-rpi-usb-host.dtsi"
7#include "bcm283x-rpi-wifi-bt.dtsi"
7 8
8/ {9/ {
9 compatible = "raspberrypi,3-model-b", "brcm,bcm2837";10 compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
@@ -24,11 +25,10 @@ · 14 unmodified lines
24 gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;25 gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
25 };26 };
26 };27 };
28};
27 29
28 wifi_pwrseq: wifi-pwrseq {30&bt {
29 compatible = "mmc-pwrseq-simple";31 shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
30 reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
31 };
32};32};
33 33
34&firmware {34&firmware {
@@ -134,13 +134,6 @@ · 99 unmodified lines
134&uart0 {134&uart0 {
135 pinctrl-names = "default";135 pinctrl-names = "default";
136 pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;136 pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
137 status = "okay";
138
139 bluetooth {
140 compatible = "brcm,bcm43438-bt";
141 max-speed = <2000000>;
142 shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
143 };
144};137};
145 138
146/* uart1 is mapped to the pin header */139/* uart1 is mapped to the pin header */
@@ -150,23 +143,6 @@ · 3 unmodified lines
150 status = "okay";143 status = "okay";
151};144};
152 145
153/* SDHCI is used to control the SDIO for wireless */
154&sdhci {
155 #address-cells = <1>;
156 #size-cells = <0>;
157 pinctrl-names = "default";
158 pinctrl-0 = <&emmc_gpio34>;
159 status = "okay";
160 bus-width = <4>;
161 non-removable;
162 mmc-pwrseq = <&wifi_pwrseq>;
163
164 brcmf: wifi@1 {
165 reg = <1>;
166 compatible = "brcm,bcm4329-fmac";
167 };
168};
169
170/* SDHOST is used to drive the SD card */146/* SDHOST is used to drive the SD card */
171&sdhost {147&sdhost {
172 pinctrl-names = "default";148 pinctrl-names = "default";
@@ -174,3 +150,7 @@ · 1 unmodified line
174 status = "okay";150 status = "okay";
175 bus-width = <4>;151 bus-width = <4>;
176};152};
153
154&wifi_pwrseq {
155 reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
156};
arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi+34−0
@@ -0,0 +1,34 @@
1// SPDX-License-Identifier: GPL-2.0
2
3/ {
4 wifi_pwrseq: wifi-pwrseq {
5 compatible = "mmc-pwrseq-simple";
6 };
7};
8
9/* SDHCI is used to control the SDIO for wireless */
10&sdhci {
11 #address-cells = <1>;
12 #size-cells = <0>;
13 pinctrl-names = "default";
14 pinctrl-0 = <&emmc_gpio34>;
15 bus-width = <4>;
16 non-removable;
17 mmc-pwrseq = <&wifi_pwrseq>;
18 status = "okay";
19
20 brcmf: wifi@1 {
21 reg = <1>;
22 compatible = "brcm,bcm4329-fmac";
23 };
24};
25
26/* uart0 communicates with the BT module */
27&uart0 {
28 status = "okay";
29
30 bt: bluetooth {
31 compatible = "brcm,bcm43438-bt";
32 max-speed = <2000000>;
33 };
34};
arch/arm/boot/dts/bcm4708-netgear-r6250.dts+38−1
@@ -20,7 +20,7 @@ · 19 unmodified lines
20 bootargs = "console=ttyS0,115200 earlycon";20 bootargs = "console=ttyS0,115200 earlycon";
21 };21 };
22 22
23 memory {23 memory@0 {
24 device_type = "memory";24 device_type = "memory";
25 reg = <0x00000000 0x08000000>,25 reg = <0x00000000 0x08000000>,
26 <0x88000000 0x08000000>;26 <0x88000000 0x08000000>;
@@ -94,3 +94,40 @@ · 67 unmodified lines
94&usb3_phy {94&usb3_phy {
95 status = "okay";95 status = "okay";
96};96};
97
98&srab {
99 status = "okay";
100
101 ports {
102 port@0 {
103 reg = <0>;
104 label = "lan4";
105 };
106
107 port@1 {
108 reg = <1>;
109 label = "lan3";
110 };
111
112 port@2 {
113 reg = <2>;
114 label = "lan2";
115 };
116
117 port@3 {
118 reg = <3>;
119 label = "lan1";
120 };
121
122 port@4 {
123 reg = <4>;
124 label = "wan";
125 };
126
127 port@5 {
128 reg = <5>;
129 label = "cpu";
130 ethernet = <&gmac0>;
131 };
132 };
133};
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts+37−0
@@ -117,3 +117,40 @@ · 116 unmodified lines
117 };117 };
118 };118 };
119};119};
120
121&srab {
122 status = "okay";
123
124 ports {
125 port@0 {
126 reg = <0>;
127 label = "lan1";
128 };
129
130 port@1 {
131 reg = <1>;
132 label = "lan2";
133 };
134
135 port@2 {
136 reg = <2>;
137 label = "lan3";
138 };
139
140 port@3 {
141 reg = <3>;
142 label = "lan4";
143 };
144
145 port@4 {
146 reg = <4>;
147 label = "wan";
148 };
149
150 port@5 {
151 reg = <5>;
152 label = "cpu";
153 ethernet = <&gmac0>;
154 };
155 };
156};
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts+1−1
@@ -19,7 +19,7 @@ · 18 unmodified lines
19 bootargs = "console=ttyS0,115200";19 bootargs = "console=ttyS0,115200";
20 };20 };
21 21
22 memory {22 memory@0 {
23 device_type = "memory";23 device_type = "memory";
24 reg = <0x00000000 0x08000000>,24 reg = <0x00000000 0x08000000>,
25 <0x88000000 0x08000000>;25 <0x88000000 0x08000000>;
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts+1−1
@@ -19,7 +19,7 @@ · 18 unmodified lines
19 bootargs = "console=ttyS0,115200";19 bootargs = "console=ttyS0,115200";
20 };20 };
21 21
22 memory {22 memory@0 {
23 device_type = "memory";23 device_type = "memory";
24 reg = <0x00000000 0x08000000>,24 reg = <0x00000000 0x08000000>,
25 <0x88000000 0x18000000>;25 <0x88000000 0x18000000>;
arch/arm/boot/dts/bcm4709-linksys-ea9200.dts+1−1
@@ -16,7 +16,7 @@ · 15 unmodified lines
16 bootargs = "console=ttyS0,115200";16 bootargs = "console=ttyS0,115200";
17 };17 };
18 18
19 memory {19 memory@0 {
20 device_type = "memory";20 device_type = "memory";
21 reg = <0x00000000 0x08000000>,21 reg = <0x00000000 0x08000000>,
22 <0x88000000 0x08000000>;22 <0x88000000 0x08000000>;
arch/arm/boot/dts/bcm4709-netgear-r7000.dts+1−1
@@ -19,7 +19,7 @@ · 18 unmodified lines
19 bootargs = "console=ttyS0,115200";19 bootargs = "console=ttyS0,115200";
20 };20 };
21 21
22 memory {22 memory@0 {
23 device_type = "memory";23 device_type = "memory";
24 reg = <0x00000000 0x08000000>,24 reg = <0x00000000 0x08000000>,
25 <0x88000000 0x08000000>;25 <0x88000000 0x08000000>;
arch/arm/boot/dts/bcm4709-netgear-r8000.dts+43−1
@@ -30,7 +30,7 @@ · 29 unmodified lines
30 bootargs = "console=ttyS0,115200";30 bootargs = "console=ttyS0,115200";
31 };31 };
32 32
33 memory {33 memory@0 {
34 device_type = "memory";34 device_type = "memory";
35 reg = <0x00000000 0x08000000>,35 reg = <0x00000000 0x08000000>,
36 <0x88000000 0x08000000>;36 <0x88000000 0x08000000>;
@@ -187,3 +187,45 @@ · 150 unmodified lines
187&usb3_phy {187&usb3_phy {
188 status = "okay";188 status = "okay";
189};189};
190
191&srab {
192 status = "okay";
193
194 ports {
195 port@0 {
196 reg = <0>;
197 label = "lan1";
198 };
199
200 port@1 {
201 reg = <1>;
202 label = "lan2";
203 };
204
205 port@2 {
206 reg = <2>;
207 label = "lan3";
208 };
209
210 port@3 {
211 reg = <3>;
212 label = "lan4";
213 };
214
215 port@4 {
216 reg = <4>;
217 label = "wan";
218 };
219
220 port@8 {
221 reg = <8>;
222 label = "cpu";
223 ethernet = <&gmac2>;
224
225 fixed-link {
226 speed = <1000>;
227 full-duplex;
228 };
229 };
230 };
231};
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts+1−1
@@ -15,7 +15,7 @@ · 14 unmodified lines
15 bootargs = "console=ttyS0,115200 earlycon";15 bootargs = "console=ttyS0,115200 earlycon";
16 };16 };
17 17
18 memory {18 memory@0 {
19 device_type = "memory";19 device_type = "memory";
20 reg = <0x00000000 0x08000000>;20 reg = <0x00000000 0x08000000>;
21 };21 };
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts+200−0
@@ -0,0 +1,200 @@
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright (C) 2021 Arınç ÜNAL <arinc.unal@arinc9.com>
4 */
5
6/dts-v1/;
7
8#include "bcm47094.dtsi"
9#include "bcm5301x-nand-cs0-bch8.dtsi"
10
11/ {
12 compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
13 model = "Asus RT-AC88U";
14
15 chosen {
16 bootargs = "earlycon";
17 };
18
19 memory@0 {
20 device_type = "memory";
21 reg = <0x00000000 0x08000000>,
22 <0x88000000 0x18000000>;
23 };
24
25 nvram@1c080000 {
26 compatible = "brcm,nvram";
27 reg = <0x1c080000 0x00180000>;
28 };
29
30 leds {
31 compatible = "gpio-leds";
32
33 power {
34 label = "white:power";
35 gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
36 linux,default-trigger = "default-on";
37 };
38
39 wan-red {
40 label = "red:wan";
41 gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
42 };
43
44 lan {
45 label = "white:lan";
46 gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
47 };
48
49 usb2 {
50 label = "white:usb2";
51 gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
52 trigger-sources = <&ehci_port2>;
53 linux,default-trigger = "usbport";
54 };
55
56 usb3 {
57 label = "white:usb3";
58 gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
59 trigger-sources = <&ehci_port1>, <&xhci_port1>;
60 linux,default-trigger = "usbport";
61 };
62
63 wps {
64 label = "white:wps";
65 gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
66 };
67 };
68
69 gpio-keys {
70 compatible = "gpio-keys";
71 #address-cells = <1>;
72 #size-cells = <0>;
73
74 wps {
75 label = "WPS";
76 linux,code = <KEY_WPS_BUTTON>;
77 gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
78 };
79
80 reset {
81 label = "Reset";
82 linux,code = <KEY_RESTART>;
83 gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
84 };
85
86 wifi {
87 label = "Wi-Fi";
88 linux,code = <KEY_RFKILL>;
89 gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
90 };
91
92 led {
93 label = "Backlight";
94 linux,code = <KEY_BRIGHTNESS_ZERO>;
95 gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
96 };
97 };
98};
99
100&srab {
101 compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
102 status = "okay";
103 dsa,member = <0 0>;
104
105 ports {
106 #address-cells = <1>;
107 #size-cells = <0>;
108
109 port@0 {
110 reg = <0>;
111 label = "lan4";
112 };
113
114 port@1 {
115 reg = <1>;
116 label = "lan3";
117 };
118
119 port@2 {
120 reg = <2>;
121 label = "lan2";
122 };
123
124 port@3 {
125 reg = <3>;
126 label = "lan1";
127 };
128
129 port@4 {
130 reg = <4>;
131 label = "wan";
132 };
133
134 sw0_p5: port@5 {
135 reg = <5>;
136 label = "extsw";
137
138 fixed-link {
139 speed = <1000>;
140 full-duplex;
141 };
142 };
143
144 port@7 {
145 reg = <7>;
146 ethernet = <&gmac1>;
147 label = "cpu";
148
149 fixed-link {
150 speed = <1000>;
151 full-duplex;
152 };
153 };
154
155 port@8 {
156 reg = <8>;
157 ethernet = <&gmac2>;
158 label = "cpu";
159 status = "disabled";
160
161 fixed-link {
162 speed = <1000>;
163 full-duplex;
164 };
165 };
166 };
167};
168
169&usb2 {
170 vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
171};
172
173&usb3_phy {
174 status = "okay";
175};
176
177&nandcs {
178 partitions {
179 compatible = "fixed-partitions";
180 #address-cells = <1>;
181 #size-cells = <1>;
182
183 partition@0 {
184 label = "boot";
185 reg = <0x00000000 0x00080000>;
186 read-only;
187 };
188
189 partition@80000 {
190 label = "nvram";
191 reg = <0x00080000 0x00180000>;
192 };
193
194 partition@200000 {
195 label = "firmware";
196 reg = <0x00200000 0x07e00000>;
197 compatible = "brcm,trx";
198 };
199 };
200};
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts+42−0
@@ -118,3 +118,45 @@ · 117 unmodified lines
118&usb3_phy {118&usb3_phy {
119 status = "okay";119 status = "okay";
120};120};
121
122&srab {
123 status = "okay";
124
125 ports {
126 port@0 {
127 reg = <0>;
128 label = "lan4";
129 };
130
131 port@1 {
132 reg = <1>;
133 label = "lan3";
134 };
135
136 port@2 {
137 reg = <2>;
138 label = "lan2";
139 };
140
141 port@3 {
142 reg = <3>;
143 label = "lan1";
144 };
145
146 port@4 {
147 reg = <4>;
148 label = "wan";
149 };
150
151 port@8 {
152 reg = <8>;
153 label = "cpu";
154 ethernet = <&gmac2>;
155
156 fixed-link {
157 speed = <1000>;
158 full-duplex;
159 };
160 };
161 };
162};
arch/arm/boot/dts/bcm47094-linksys-panamera.dts+1−1
@@ -129,7 +129,7 @@ · 128 unmodified lines
129 };129 };
130 };130 };
131 131
132 mdio-bus-mux@18003000 {132 mdio-mux@18003000 {
133 133
134 /* BIT(9) = 1 => external mdio */134 /* BIT(9) = 1 => external mdio */
135 mdio@200 {135 mdio@200 {
arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts+37−0
@@ -68,3 +68,40 @@ · 67 unmodified lines
68&usb3_phy {68&usb3_phy {
69 status = "okay";69 status = "okay";
70};70};
71
72&srab {
73 status = "okay";
74
75 ports {
76 port@0 {
77 reg = <0>;
78 label = "wan";
79 };
80
81 port@1 {
82 reg = <1>;
83 label = "lan4";
84 };
85
86 port@2 {
87 reg = <2>;
88 label = "lan3";
89 };
90
91 port@3 {
92 reg = <3>;
93 label = "lan2";
94 };
95
96 port@4 {
97 reg = <4>;
98 label = "lan1";
99 };
100
101 port@5 {
102 reg = <5>;
103 label = "cpu";
104 ethernet = <&gmac0>;
105 };
106 };
107};
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts+37−0
@@ -68,3 +68,40 @@ · 67 unmodified lines
68&usb3_phy {68&usb3_phy {
69 status = "okay";69 status = "okay";
70};70};
71
72&srab {
73 status = "okay";
74
75 ports {
76 port@0 {
77 reg = <0>;
78 label = "wan";
79 };
80
81 port@1 {
82 reg = <1>;
83 label = "lan4";
84 };
85
86 port@2 {
87 reg = <2>;
88 label = "lan3";
89 };
90
91 port@3 {
92 reg = <3>;
93 label = "lan2";
94 };
95
96 port@4 {
97 reg = <4>;
98 label = "lan1";
99 };
100
101 port@5 {
102 reg = <5>;
103 label = "cpu";
104 ethernet = <&gmac0>;
105 };
106 };
107};
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts+1−1
@@ -16,7 +16,7 @@ · 15 unmodified lines
16 bootargs = "earlycon";16 bootargs = "earlycon";
17 };17 };
18 18
19 memory {19 memory@0 {
20 device_type = "memory";20 device_type = "memory";
21 reg = <0x00000000 0x08000000>,21 reg = <0x00000000 0x08000000>,
22 <0x88000000 0x18000000>;22 <0x88000000 0x18000000>;
arch/arm/boot/dts/bcm47189-tenda-ac9.dts+37−0
@@ -105,3 +105,40 @@ · 104 unmodified lines
105 };105 };
106 };106 };
107};107};
108
109&switch {
110 status = "okay";
111
112 ports {
113 port@0 {
114 reg = <0>;
115 label = "wan";
116 };
117
118 port@1 {
119 reg = <1>;
120 label = "lan1";
121 };
122
123 port@2 {
124 reg = <2>;
125 label = "lan2";
126 };
127
128 port@3 {
129 reg = <3>;
130 label = "lan3";
131 };
132
133 port@4 {
134 reg = <4>;
135 label = "lan4";
136 };
137
138 port@5 {
139 reg = <5>;
140 label = "cpu";
141 ethernet = <&gmac0>;
142 };
143 };
144};
arch/arm/boot/dts/bcm53016-meraki-mr32.dts+34−1
@@ -20,7 +20,7 @@ · 19 unmodified lines
20 bootargs = " console=ttyS0,115200n8 earlycon";20 bootargs = " console=ttyS0,115200n8 earlycon";
21 };21 };
22 22
23 memory {23 memory@0 {
24 reg = <0x00000000 0x08000000>;24 reg = <0x00000000 0x08000000>;
25 device_type = "memory";25 device_type = "memory";
26 };26 };
@@ -110,6 +110,12 @@ · 83 unmodified lines
110 reg = <0x50>;110 reg = <0x50>;
111 pagesize = <32>;111 pagesize = <32>;
112 read-only;112 read-only;
113 #address-cells = <1>;
114 #size-cells = <1>;
115
116 mac_address: mac-address@66 {
117 reg = <0x66 0x6>;
118 };
113 };119 };
114 };120 };
115};121};
@@ -133,6 +139,11 @@ · 17 unmodified lines
133 */139 */
134};140};
135 141
142&gmac0 {
143 nvmem-cell-names = "mac-address";
144 nvmem-cells = <&mac_address>;
145};
146
136&gmac1 {147&gmac1 {
137 status = "disabled";148 status = "disabled";
138};149};
@@ -195,3 +206,25 @@ · 56 unmodified lines
195 };206 };
196 };207 };
197};208};
209
210&srab {
211 status = "okay";
212
213 ports {
214 port@0 {
215 reg = <0>;
216 label = "poe";
217 };
218
219 port@5 {
220 reg = <5>;
221 label = "cpu";
222 ethernet = <&gmac0>;
223
224 fixed-link {
225 speed = <1000>;
226 duplex-full;
227 };
228 };
229 };
230};
arch/arm/boot/dts/bcm5301x.dtsi+5−5
@@ -19,7 +19,7 @@ · 18 unmodified lines
19 #size-cells = <1>;19 #size-cells = <1>;
20 interrupt-parent = <&gic>;20 interrupt-parent = <&gic>;
21 21
22 chipcommonA@18000000 {22 chipcommon-a-bus@18000000 {
23 compatible = "simple-bus";23 compatible = "simple-bus";
24 ranges = <0x00000000 0x18000000 0x00001000>;24 ranges = <0x00000000 0x18000000 0x00001000>;
25 #address-cells = <1>;25 #address-cells = <1>;
@@ -44,7 +44,7 @@ · 18 unmodified lines
44 };44 };
45 };45 };
46 46
47 mpcore@19000000 {47 mpcore-bus@19000000 {
48 compatible = "simple-bus";48 compatible = "simple-bus";
49 ranges = <0x00000000 0x19000000 0x00023000>;49 ranges = <0x00000000 0x19000000 0x00023000>;
50 #address-cells = <1>;50 #address-cells = <1>;
@@ -369,8 +369,8 @@ · 318 unmodified lines
369 #address-cells = <1>;369 #address-cells = <1>;
370 };370 };
371 371
372 mdio-bus-mux@18003000 {372 mdio-mux@18003000 {
373 compatible = "mdio-mux-mmioreg";373 compatible = "mdio-mux-mmioreg", "mdio-mux";
374 mdio-parent-bus = <&mdio>;374 mdio-parent-bus = <&mdio>;
375 #address-cells = <1>;375 #address-cells = <1>;
376 #size-cells = <0>;376 #size-cells = <0>;
@@ -415,7 +415,7 @@ · 38 unmodified lines
415 status = "disabled";415 status = "disabled";
416 };416 };
417 417
418 dmu@1800c000 {418 dmu-bus@1800c000 {
419 compatible = "simple-bus";419 compatible = "simple-bus";
420 ranges = <0 0x1800c000 0x1000>;420 ranges = <0 0x1800c000 0x1000>;
421 #address-cells = <1>;421 #address-cells = <1>;
arch/arm/boot/dts/bcm53573.dtsi+18−0
@@ -180,6 +180,24 @@ · 179 unmodified lines
180 180
181 gmac0: ethernet@5000 {181 gmac0: ethernet@5000 {
182 reg = <0x5000 0x1000>;182 reg = <0x5000 0x1000>;
183
184 mdio {
185 #address-cells = <1>;
186 #size-cells = <0>;
187
188 switch: switch@1e {
189 compatible = "brcm,bcm53125";
190 reg = <0x1e>;
191
192 status = "disabled";
193
194 /* ports are defined in board DTS */
195 ports {
196 #address-cells = <1>;
197 #size-cells = <0>;
198 };
199 };
200 };
183 };201 };
184 202
185 gmac1: ethernet@b000 {203 gmac1: ethernet@b000 {
arch/arm/boot/dts/bcm94708.dts+1−1
@@ -38,7 +38,7 @@ · 37 unmodified lines
38 model = "NorthStar SVK (BCM94708)";38 model = "NorthStar SVK (BCM94708)";
39 compatible = "brcm,bcm94708", "brcm,bcm4708";39 compatible = "brcm,bcm94708", "brcm,bcm4708";
40 40
41 memory {41 memory@0 {
42 device_type = "memory";42 device_type = "memory";
43 reg = <0x00000000 0x08000000>;43 reg = <0x00000000 0x08000000>;
44 };44 };
arch/arm/boot/dts/bcm94709.dts+1−1
@@ -38,7 +38,7 @@ · 37 unmodified lines
38 model = "NorthStar SVK (BCM94709)";38 model = "NorthStar SVK (BCM94709)";
39 compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";39 compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
40 40
41 memory {41 memory@0 {
42 device_type = "memory";42 device_type = "memory";
43 reg = <0x00000000 0x08000000>;43 reg = <0x00000000 0x08000000>;
44 };44 };
arch/arm/boot/dts/bcm958522er.dts+2−1
@@ -37,7 +37,7 @@ · 36 unmodified lines
37 37
38/ {38/ {
39 model = "NorthStar Plus SVK (BCM958522ER)";39 model = "NorthStar Plus SVK (BCM958522ER)";
40 compatible = "brcm,bcm58522", "brcm,nsp";40 compatible = "brcm,bcm958522er", "brcm,bcm58522", "brcm,nsp";
41 41
42 chosen {42 chosen {
43 stdout-path = "serial0:115200n8";43 stdout-path = "serial0:115200n8";
@@ -134,6 +134,7 @@ · 90 unmodified lines
134};134};
135 135
136&qspi {136&qspi {
137 status = "okay";
137 bspi-sel = <0>;138 bspi-sel = <0>;
138 flash: m25p80@0 {139 flash: m25p80@0 {
139 #address-cells = <1>;140 #address-cells = <1>;
arch/arm/boot/dts/bcm958525er.dts+2−1
@@ -37,7 +37,7 @@ · 36 unmodified lines
37 37
38/ {38/ {
39 model = "NorthStar Plus SVK (BCM958525ER)";39 model = "NorthStar Plus SVK (BCM958525ER)";
40 compatible = "brcm,bcm58525", "brcm,nsp";40 compatible = "brcm,bcm958525er", "brcm,bcm58525", "brcm,nsp";
41 41
42 chosen {42 chosen {
43 stdout-path = "serial0:115200n8";43 stdout-path = "serial0:115200n8";
@@ -134,6 +134,7 @@ · 90 unmodified lines
134};134};
135 135
136&qspi {136&qspi {
137 status = "okay";
137 bspi-sel = <0>;138 bspi-sel = <0>;
138 flash: m25p80@0 {139 flash: m25p80@0 {
139 #address-cells = <1>;140 #address-cells = <1>;
arch/arm/boot/dts/bcm958525xmc.dts+2−1
@@ -37,7 +37,7 @@ · 36 unmodified lines
37 37
38/ {38/ {
39 model = "NorthStar Plus XMC (BCM958525xmc)";39 model = "NorthStar Plus XMC (BCM958525xmc)";
40 compatible = "brcm,bcm58525", "brcm,nsp";40 compatible = "brcm,bcm958525xmc", "brcm,bcm58525", "brcm,nsp";
41 41
42 chosen {42 chosen {
43 stdout-path = "serial0:115200n8";43 stdout-path = "serial0:115200n8";
@@ -150,6 +150,7 @@ · 106 unmodified lines
150};150};
151 151
152&qspi {152&qspi {
153 status = "okay";
153 bspi-sel = <0>;154 bspi-sel = <0>;
154 flash: m25p80@0 {155 flash: m25p80@0 {
155 #address-cells = <1>;156 #address-cells = <1>;
arch/arm/boot/dts/bcm958622hr.dts+2−1
@@ -37,7 +37,7 @@ · 36 unmodified lines
37 37
38/ {38/ {
39 model = "NorthStar Plus SVK (BCM958622HR)";39 model = "NorthStar Plus SVK (BCM958622HR)";
40 compatible = "brcm,bcm58622", "brcm,nsp";40 compatible = "brcm,bcm958622hr", "brcm,bcm58622", "brcm,nsp";
41 41
42 chosen {42 chosen {
43 stdout-path = "serial0:115200n8";43 stdout-path = "serial0:115200n8";
@@ -138,6 +138,7 @@ · 94 unmodified lines
138};138};
139 139
140&qspi {140&qspi {
141 status = "okay";
141 bspi-sel = <0>;142 bspi-sel = <0>;
142 flash: m25p80@0 {143 flash: m25p80@0 {
143 #address-cells = <1>;144 #address-cells = <1>;
arch/arm/boot/dts/bcm958623hr.dts+2−1
@@ -37,7 +37,7 @@ · 36 unmodified lines
37 37
38/ {38/ {
39 model = "NorthStar Plus SVK (BCM958623HR)";39 model = "NorthStar Plus SVK (BCM958623HR)";
40 compatible = "brcm,bcm58623", "brcm,nsp";40 compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp";
41 41
42 chosen {42 chosen {
43 stdout-path = "serial0:115200n8";43 stdout-path = "serial0:115200n8";
@@ -142,6 +142,7 @@ · 98 unmodified lines
142};142};
143 143
144&qspi {144&qspi {
145 status = "okay";
145 bspi-sel = <0>;146 bspi-sel = <0>;
146 flash: m25p80@0 {147 flash: m25p80@0 {
147 #address-cells = <1>;148 #address-cells = <1>;
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi+281−0
@@ -0,0 +1,281 @@
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
4 *
5 * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6 */
7
8#include "bcm958625-meraki-mx6x-common.dtsi"
9
10/ {
11 keys {
12 compatible = "gpio-keys-polled";
13 autorepeat;
14 poll-interval = <20>;
15
16 reset {
17 label = "reset";
18 linux,code = <KEY_RESTART>;
19 gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
20 };
21 };
22
23 leds {
24 compatible = "gpio-leds";
25
26 led-0 {
27 /* green:wan1-left */
28 function = LED_FUNCTION_ACTIVITY;
29 function-enumerator = <0>;
30 color = <LED_COLOR_ID_GREEN>;
31 gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
32 };
33
34 led-1 {
35 /* green:wan1-right */
36 function = LED_FUNCTION_ACTIVITY;
37 function-enumerator = <1>;
38 color = <LED_COLOR_ID_GREEN>;
39 gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
40 };
41
42 led-2 {
43 /* green:wan2-left */
44 function = LED_FUNCTION_ACTIVITY;
45 function-enumerator = <2>;
46 color = <LED_COLOR_ID_GREEN>;
47 gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
48 };
49
50 led-3 {
51 /* green:wan2-right */
52 function = LED_FUNCTION_ACTIVITY;
53 function-enumerator = <3>;
54 color = <LED_COLOR_ID_GREEN>;
55 gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
56 };
57
58 led-4 {
59 /* amber:power */
60 function = LED_FUNCTION_POWER;
61 color = <LED_COLOR_ID_AMBER>;
62 gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
63 default-state = "on";
64 };
65
66 led-5 {
67 /* white:status */
68 function = LED_FUNCTION_STATUS;
69 color = <LED_COLOR_ID_WHITE>;
70 gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
71 };
72 };
73};
74
75&axi {
76 mdio-mux@3f1c0 {
77 compatible = "mdio-mux-mmioreg", "mdio-mux";
78 reg = <0x3f1c0 0x4>;
79 mux-mask = <0x2000>;
80 mdio-parent-bus = <&mdio_ext>;
81 #address-cells = <1>;
82 #size-cells = <0>;
83
84 mdio@0 {
85 reg = <0x0>;
86 #address-cells = <1>;
87 #size-cells = <0>;
88
89 phy_port6: phy@0 {
90 reg = <0>;
91 };
92
93 phy_port7: phy@1 {
94 reg = <1>;
95 };
96
97 phy_port8: phy@2 {
98 reg = <2>;
99 };
100
101 phy_port9: phy@3 {
102 reg = <3>;
103 };
104
105 phy_port10: phy@4 {
106 reg = <4>;
107 };
108
109 switch@10 {
110 compatible = "qca,qca8337";
111 reg = <0x10>;
112 dsa,member = <1 0>;
113
114 ports {
115 #address-cells = <1>;
116 #size-cells = <0>;
117 port@0 {
118 reg = <0>;
119 ethernet = <&sgmii1>;
120 phy-mode = "sgmii";
121 fixed-link {
122 speed = <1000>;
123 full-duplex;
124 };
125 };
126
127 port@1 {
128 reg = <1>;
129 label = "lan8";
130 phy-handle = <&phy_port6>;
131 };
132
133 port@2 {
134 reg = <2>;
135 label = "lan9";
136 phy-handle = <&phy_port7>;
137 };
138
139 port@3 {
140 reg = <3>;
141 label = "lan10";
142 phy-handle = <&phy_port8>;
143 };
144
145 port@4 {
146 reg = <4>;
147 label = "lan11";
148 phy-handle = <&phy_port9>;
149 };
150
151 port@5 {
152 reg = <5>;
153 label = "lan12";
154 phy-handle = <&phy_port10>;
155 };
156 };
157 };
158 };
159
160 mdio-mii@2000 {
161 reg = <0x2000>;
162 #address-cells = <1>;
163 #size-cells = <0>;
164
165 phy_port1: phy@0 {
166 reg = <0>;
167 };
168
169 phy_port2: phy@1 {
170 reg = <1>;
171 };
172
173 phy_port3: phy@2 {
174 reg = <2>;
175 };
176
177 phy_port4: phy@3 {
178 reg = <3>;
179 };
180
181 phy_port5: phy@4 {
182 reg = <4>;
183 };
184
185 switch@10 {
186 compatible = "qca,qca8337";
187 reg = <0x10>;
188 dsa,member = <2 0>;
189
190 ports {
191 #address-cells = <1>;
192 #size-cells = <0>;
193 port@0 {
194 reg = <0>;
195 ethernet = <&sgmii0>;
196 phy-mode = "sgmii";
197 fixed-link {
198 speed = <1000>;
199 full-duplex;
200 };
201 };
202
203 port@1 {
204 reg = <1>;
205 label = "lan3";
206 phy-handle = <&phy_port1>;
207 };
208
209 port@2 {
210 reg = <2>;
211 label = "lan4";
212 phy-handle = <&phy_port2>;
213 };
214
215 port@3 {
216 reg = <3>;
217 label = "lan5";
218 phy-handle = <&phy_port3>;
219 };
220
221 port@4 {
222 reg = <4>;
223 label = "lan6";
224 phy-handle = <&phy_port4>;
225 };
226
227 port@5 {
228 reg = <5>;
229 label = "lan7";
230 phy-handle = <&phy_port5>;
231 };
232 };
233 };
234 };
235 };
236};
237
238&srab {
239 compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
240 status = "okay";
241 dsa,member = <0 0>;
242
243 ports {
244 port@0 {
245 label = "wan1";
246 reg = <0>;
247 };
248
249 port@1 {
250 label = "wan2";
251 reg = <1>;
252 };
253
254 sgmii0: port@4 {
255 label = "sw0";
256 reg = <4>;
257 fixed-link {
258 speed = <1000>;
259 full-duplex;
260 };
261 };
262
263 sgmii1: port@5 {
264 label = "sw1";
265 reg = <5>;
266 fixed-link {
267 speed = <1000>;
268 full-duplex;
269 };
270 };
271
272 port@8 {
273 ethernet = <&amac2>;
274 reg = <8>;
275 fixed-link {
276 speed = <1000>;
277 full-duplex;
278 };
279 };
280 };
281};
arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi+163−0
@@ -0,0 +1,163 @@
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin).
4 *
5 * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6 */
7
8#include "bcm958625-meraki-mx6x-common.dtsi"
9
10/ {
11
12 keys {
13 compatible = "gpio-keys-polled";
14 autorepeat;
15 poll-interval = <20>;
16
17 reset {
18 label = "reset";
19 linux,code = <KEY_RESTART>;
20 gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
21 };
22 };
23
24 leds {
25 compatible = "gpio-leds";
26
27 led-0 {
28 /* green:lan1-left */
29 function = LED_FUNCTION_ACTIVITY;
30 function-enumerator = <0>;
31 color = <LED_COLOR_ID_GREEN>;
32 gpios = <&gpioa 19 GPIO_ACTIVE_LOW>;
33 };
34
35 led-1 {
36 /* green:lan1-right */
37 function = LED_FUNCTION_ACTIVITY;
38 function-enumerator = <1>;
39 color = <LED_COLOR_ID_GREEN>;
40 gpios = <&gpioa 18 GPIO_ACTIVE_LOW>;
41 };
42
43 led-2 {
44 /* green:lan2-left */
45 function = LED_FUNCTION_ACTIVITY;
46 function-enumerator = <2>;
47 color = <LED_COLOR_ID_GREEN>;
48 gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
49 };
50
51 led-3 {
52 /* green:lan2-right */
53 function = LED_FUNCTION_ACTIVITY;
54 function-enumerator = <3>;
55 color = <LED_COLOR_ID_GREEN>;
56 gpios = <&gpioa 20 GPIO_ACTIVE_LOW>;
57 };
58
59 led-4 {
60 /* green:lan3-left */
61 function = LED_FUNCTION_ACTIVITY;
62 function-enumerator = <4>;
63 color = <LED_COLOR_ID_GREEN>;
64 gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
65 };
66
67 led-5 {
68 /* green:lan3-right */
69 function = LED_FUNCTION_ACTIVITY;
70 function-enumerator = <5>;
71 color = <LED_COLOR_ID_GREEN>;
72 gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
73 };
74
75 led-6 {
76 /* green:lan4-left */
77 function = LED_FUNCTION_ACTIVITY;
78 function-enumerator = <6>;
79 color = <LED_COLOR_ID_GREEN>;
80 gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
81 };
82
83 led-7 {
84 /* green:lan4-right */
85 function = LED_FUNCTION_ACTIVITY;
86 function-enumerator = <7>;
87 color = <LED_COLOR_ID_GREEN>;
88 gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
89 };
90
91 led-8 {
92 /* green:wan-left */
93 function = LED_FUNCTION_ACTIVITY;
94 function-enumerator = <8>;
95 color = <LED_COLOR_ID_GREEN>;
96 gpios = <&gpioa 30 GPIO_ACTIVE_LOW>;
97 };
98
99 led-9 {
100 /* green:wan-right */
101 function = LED_FUNCTION_ACTIVITY;
102 function-enumerator = <9>;
103 color = <LED_COLOR_ID_GREEN>;
104 gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
105 };
106
107 led-a {
108 /* amber:power */
109 function = LED_FUNCTION_POWER;
110 color = <LED_COLOR_ID_AMBER>;
111 gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
112 default-state = "on";
113 };
114
115 led-b {
116 /* white:status */
117 function = LED_FUNCTION_STATUS;
118 color = <LED_COLOR_ID_WHITE>;
119 gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
120 };
121 };
122};
123
124&srab {
125 compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
126 status = "okay";
127
128 ports {
129 port@0 {
130 label = "lan1";
131 reg = <0>;
132 };
133
134 port@1 {
135 label = "lan2";
136 reg = <1>;
137 };
138
139 port@2 {
140 label = "lan3";
141 reg = <2>;
142 };
143
144 port@3 {
145 label = "lan4";
146 reg = <3>;
147 };
148
149 port@4 {
150 label = "wan";
151 reg = <4>;
152 };
153
154 port@8 {
155 ethernet = <&amac2>;
156 reg = <8>;
157 fixed-link {
158 speed = <1000>;
159 full-duplex;
160 };
161 };
162 };
163};
arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts+25−0
@@ -0,0 +1,25 @@
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC.
4 *
5 * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6 */
7
8/dts-v1/;
9
10#include "bcm958625-meraki-kingpin.dtsi"
11#include "bcm-nsp-ax.dtsi"
12
13/ {
14 model = "Cisco Meraki MX64(A0)";
15 compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp";
16
17 chosen {
18 stdout-path = "serial0:115200n8";
19 };
20
21 memory@60000000 {
22 device_type = "memory";
23 reg = <0x60000000 0x80000000>;
24 };
25};
arch/arm/boot/dts/bcm958625-meraki-mx64.dts+24−0
@@ -0,0 +1,24 @@
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC.
4 *
5 * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6 */
7
8/dts-v1/;
9
10#include "bcm958625-meraki-kingpin.dtsi"
11
12/ {
13 model = "Cisco Meraki MX64";
14 compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp";
15
16 chosen {
17 stdout-path = "serial0:115200n8";
18 };
19
20 memory@60000000 {
21 device_type = "memory";
22 reg = <0x60000000 0x80000000>;
23 };
24};
arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts+33−0
@@ -0,0 +1,33 @@
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC.
4 *
5 * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6 */
7
8/dts-v1/;
9
10#include "bcm958625-meraki-kingpin.dtsi"
11#include "bcm-nsp-ax.dtsi"
12
13/ {
14 model = "Cisco Meraki MX64W(A0)";
15 compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp";
16
17 chosen {
18 stdout-path = "serial0:115200n8";
19 };
20
21 memory@60000000 {
22 device_type = "memory";
23 reg = <0x60000000 0x80000000>;
24 };
25};
26
27&pcie0 {
28 status = "okay";
29};
30
31&pcie1 {
32 status = "okay";
33};
arch/arm/boot/dts/bcm958625-meraki-mx64w.dts+32−0
@@ -0,0 +1,32 @@
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC.
4 *
5 * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6 */
7
8/dts-v1/;
9
10#include "bcm958625-meraki-kingpin.dtsi"
11
12/ {
13 model = "Cisco Meraki MX64W";
14 compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp";
15
16 chosen {
17 stdout-path = "serial0:115200n8";
18 };
19
20 memory@60000000 {
21 device_type = "memory";
22 reg = <0x60000000 0x80000000>;
23 };
24};
25
26&pcie0 {
27 status = "okay";
28};
29
30&pcie1 {
31 status = "okay";
32};
arch/arm/boot/dts/bcm958625-meraki-mx65.dts+24−0
@@ -0,0 +1,24 @@
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Device Tree Bindings for Cisco Meraki MX65.
4 *
5 * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6 */
7
8/dts-v1/;
9
10#include "bcm958625-meraki-alamo.dtsi"
11
12/ {
13 model = "Cisco Meraki MX65";
14 compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
15
16 chosen {
17 stdout-path = "serial0:115200n8";
18 };
19
20 memory@60000000 {
21 device_type = "memory";
22 reg = <0x60000000 0x80000000>;
23 };
24};
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts+32−0
@@ -0,0 +1,32 @@
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Device Tree Bindings for Cisco Meraki MX65W.
4 *
5 * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6 */
7
8/dts-v1/;
9
10#include "bcm958625-meraki-alamo.dtsi"
11
12/ {
13 model = "Cisco Meraki MX65W";
14 compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
15
16 chosen {
17 stdout-path = "serial0:115200n8";
18 };
19
20 memory@60000000 {
21 device_type = "memory";
22 reg = <0x60000000 0x80000000>;
23 };
24};
25
26&pcie0 {
27 status = "okay";
28};
29
30&pcie1 {
31 status = "okay";
32};
arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi+129−0
@@ -0,0 +1,129 @@
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
4 *
5 * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6 */
7
8#include "bcm-nsp.dtsi"
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/leds/common.h>
12
13/ {
14 pwm-leds {
15 compatible = "pwm-leds";
16
17 led-1 {
18 function = LED_FUNCTION_INDICATOR;
19 color = <LED_COLOR_ID_RED>;
20 pwms = <&pwm 1 50000>;
21 max-brightness = <255>;
22 };
23
24 led-2 {
25 function = LED_FUNCTION_INDICATOR;
26 color = <LED_COLOR_ID_GREEN>;
27 pwms = <&pwm 2 50000>;
28 max-brightness = <255>;
29 };
30
31 led-3 {
32 function = LED_FUNCTION_INDICATOR;
33 color = <LED_COLOR_ID_BLUE>;
34 pwms = <&pwm 3 50000>;
35 max-brightness = <255>;
36 };
37 };
38};
39
40&amac2 {
41 status = "okay";
42};
43
44&ehci0 {
45 status = "okay";
46};
47
48&i2c0 {
49 status = "okay";
50
51 eeprom@50 {
52 compatible = "atmel,24c64";
53 reg = <0x50>;
54 pagesize = <32>;
55 read-only;
56 };
57};
58
59&nand_controller {
60 nand@0 {
61 compatible = "brcm,nandcs";
62 reg = <0>;
63 nand-on-flash-bbt;
64
65 #address-cells = <1>;
66 #size-cells = <1>;
67
68 nand-ecc-strength = <24>;
69 nand-ecc-step-size = <1024>;
70
71 brcm,nand-oob-sector-size = <27>;
72
73 partition@0 {
74 label = "u-boot";
75 reg = <0x0 0x80000>;
76 read-only;
77 };
78
79 partition@80000 {
80 label = "shmoo";
81 reg = <0x80000 0x80000>;
82 read-only;
83 };
84
85 partition@100000 {
86 label = "bootkernel1";
87 reg = <0x100000 0x300000>;
88 };
89
90 partition@400000 {
91 label = "nvram";
92 reg = <0x400000 0x100000>;
93 };
94
95 partition@500000 {
96 label = "bootkernel2";
97 reg = <0x500000 0x300000>;
98 };
99
100 partition@800000 {
101 label = "ubi";
102 reg = <0x800000 0x3f700000>;
103 };
104 };
105};
106
107&ohci0 {
108 status = "okay";
109};
110
111&pinctrl {
112 pinctrl-names = "default";
113 pinctrl-0 = <&pwm_leds>;
114
115 pwm_leds: pwm_leds {
116 function = "pwm";
117 groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
118 };
119};
120
121&pwm {
122 status = "okay";
123 #pwm-cells = <2>;
124};
125
126&uart0 {
127 clock-frequency = <62500000>;
128 status = "okay";
129};
arch/arm/boot/dts/bcm958625hr.dts+2−1
@@ -37,7 +37,7 @@ · 36 unmodified lines
37 37
38/ {38/ {
39 model = "NorthStar Plus SVK (BCM958625HR)";39 model = "NorthStar Plus SVK (BCM958625HR)";
40 compatible = "brcm,bcm58625", "brcm,nsp";40 compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp";
41 41
42 chosen {42 chosen {
43 stdout-path = "serial0:115200n8";43 stdout-path = "serial0:115200n8";
@@ -149,6 +149,7 @@ · 105 unmodified lines
149};149};
150 150
151&qspi {151&qspi {
152 status = "okay";
152 bspi-sel = <0>;153 bspi-sel = <0>;
153 flash: m25p80@0 {154 flash: m25p80@0 {
154 #address-cells = <1>;155 #address-cells = <1>;
arch/arm/boot/dts/bcm958625k.dts+2−1
@@ -36,7 +36,7 @@ · 35 unmodified lines
36 36
37/ {37/ {
38 model = "NorthStar Plus SVK (BCM958625K)";38 model = "NorthStar Plus SVK (BCM958625K)";
39 compatible = "brcm,bcm58625", "brcm,nsp";39 compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp";
40 40
41 chosen {41 chosen {
42 stdout-path = "serial0:115200n8";42 stdout-path = "serial0:115200n8";
@@ -153,6 +153,7 @@ · 110 unmodified lines
153};153};
154 154
155&qspi {155&qspi {
156 status = "okay";
156 bspi-sel = <0>;157 bspi-sel = <0>;
157 flash: m25p80@0 {158 flash: m25p80@0 {
158 #address-cells = <1>;159 #address-cells = <1>;
arch/arm/boot/dts/bcm988312hr.dts+6−1
@@ -37,7 +37,7 @@ · 36 unmodified lines
37 37
38/ {38/ {
39 model = "NorthStar Plus SVK (BCM988312HR)";39 model = "NorthStar Plus SVK (BCM988312HR)";
40 compatible = "brcm,bcm88312", "brcm,nsp";40 compatible = "brcm,bcm988312hr", "brcm,bcm88312", "brcm,nsp";
41 41
42 chosen {42 chosen {
43 stdout-path = "serial0:115200n8";43 stdout-path = "serial0:115200n8";
@@ -58,6 +58,10 @@ · 14 unmodified lines
58 58
59/* USB 3 support needed to be complete */59/* USB 3 support needed to be complete */
60 60
61&dma {
62 status = "okay";
63};
64
61&amac0 {65&amac0 {
62 status = "okay";66 status = "okay";
63};67};
@@ -134,6 +138,7 @@ · 70 unmodified lines
134};138};
135 139
136&qspi {140&qspi {
141 status = "okay";
137 bspi-sel = <0>;142 bspi-sel = <0>;
138 flash: m25p80@0 {143 flash: m25p80@0 {
139 #address-cells = <1>;144 #address-cells = <1>;
arch/arm/boot/dts/dra7.dtsi+19−0
@@ -965,6 +965,25 @@ · 964 unmodified lines
965 };965 };
966 };966 };
967 967
968 target-module@59000000 {
969 compatible = "ti,sysc-omap4", "ti,sysc";
970 reg = <0x59000020 0x4>;
971 reg-names = "rev";
972 clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
973 clock-names = "fck";
974 #address-cells = <1>;
975 #size-cells = <1>;
976 ranges = <0x0 0x59000000 0x1000>;
977
978 bb2d: gpu@0 {
979 compatible = "vivante,gc";
980 reg = <0x0 0x700>;
981 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
982 clocks = <&dss_clkctrl DRA7_BB2D_CLKCTRL 0>;
983 clock-names = "core";
984 };
985 };
986
968 aes1_target: target-module@4b500000 {987 aes1_target: target-module@4b500000 {
969 compatible = "ti,sysc-omap2", "ti,sysc";988 compatible = "ti,sysc-omap2", "ti,sysc";
970 reg = <0x4b500080 0x4>,989 reg = <0x4b500080 0x4>,
arch/arm/boot/dts/e60k02.dtsi+1−1
@@ -41,7 +41,7 @@ · 40 unmodified lines
41 leds: leds {41 leds: leds {
42 compatible = "gpio-leds";42 compatible = "gpio-leds";
43 43
44 on {44 led {
45 label = "e60k02:white:on";45 label = "e60k02:white:on";
46 gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;46 gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
47 linux,default-trigger = "timer";47 linux,default-trigger = "timer";
arch/arm/boot/dts/e70k02.dtsi+320−0
@@ -0,0 +1,320 @@
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright 2021 Andreas Kemnade
4 * based on works
5 * Copyright 2016 Freescale Semiconductor, Inc.
6 * and
7 * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd
8 *
9 * Netronix E70K02 board common.
10 * This board is equipped with different SoCs and
11 * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and
12 * the Tolino Shine 3 (with i.MX6SL)
13 */
14#include <dt-bindings/input/input.h>
15
16/ {
17 aliases {
18 mmc0 = &usdhc1;
19 mmc1 = &usdhc3;
20 };
21
22 chosen {
23 stdout-path = &uart1;
24 };
25
26 gpio_keys: gpio-keys {
27 compatible = "gpio-keys";
28
29 power {
30 label = "Power";
31 gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
32 linux,code = <KEY_POWER>;
33 wakeup-source;
34 };
35
36 cover {
37 label = "Cover";
38 gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
39 linux,code = <SW_LID>;
40 linux,input-type = <EV_SW>;
41 wakeup-source;
42 };
43
44 pageup {
45 label = "PageUp";
46 gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
47 linux,code = <KEY_PAGEUP>;
48 };
49
50 pagedown {
51 label = "PageDown";
52 gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
53 linux,code = <KEY_PAGEDOWN>;
54 };
55 };
56
57 leds: leds {
58 compatible = "gpio-leds";
59
60 led {
61 label = "e70k02:white:on";
62 gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
63 linux,default-trigger = "timer";
64 };
65 };
66
67 memory@80000000 {
68 device_type = "memory";
69 reg = <0x80000000 0x20000000>;
70 };
71
72 reg_wifi: regulator-wifi {
73 compatible = "regulator-fixed";
74 regulator-name = "SD3_SPWR";
75 regulator-min-microvolt = <3000000>;
76 regulator-max-microvolt = <3000000>;
77 gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
78 enable-active-high;
79 };
80
81 wifi_pwrseq: wifi-pwrseq {
82 compatible = "mmc-pwrseq-simple";
83 post-power-on-delay-ms = <20>;
84 reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
85 };
86};
87
88&i2c1 {
89 clock-frequency = <100000>;
90 status = "okay";
91
92 lm3630a: backlight@36 {
93 reg = <0x36>;
94 compatible = "ti,lm3630a";
95 enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
96
97 #address-cells = <1>;
98 #size-cells = <0>;
99
100 led@0 {
101 reg = <0>;
102 led-sources = <0>;
103 label = "backlight_warm";
104 default-brightness = <0>;
105 max-brightness = <255>;
106 };
107
108 led@1 {
109 reg = <1>;
110 led-sources = <1>;
111 label = "backlight_cold";
112 default-brightness = <0>;
113 max-brightness = <255>;
114 };
115 };
116
117 /* TODO: KX122 acceleration sensor a 0x1e */
118
119};
120
121&i2c2 {
122 clock-frequency = <100000>;
123 status = "okay";
124
125 /* TODO: CYTTSP5 touch controller at 0x24 */
126
127 /* TODO: SY7636 PMIC for E Ink at 0x62 */
128
129};
130
131&i2c3 {
132 clock-frequency = <100000>;
133 status = "okay";
134
135 ricoh619: pmic@32 {
136 compatible = "ricoh,rc5t619";
137 reg = <0x32>;
138 interrupt-parent = <&gpio4>;
139 interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
140 system-power-controller;
141
142 regulators {
143 dcdc1_reg: DCDC1 {
144 regulator-name = "DCDC1";
145 regulator-min-microvolt = <300000>;
146 regulator-max-microvolt = <1875000>;
147 regulator-always-on;
148 regulator-boot-on;
149
150 regulator-state-mem {
151 regulator-on-in-suspend;
152 regulator-suspend-max-microvolt = <900000>;
153 regulator-suspend-min-microvolt = <900000>;
154 };
155 };
156
157 /* Core3_3V3 */
158 dcdc2_reg: DCDC2 {
159 regulator-name = "DCDC2";
160 regulator-always-on;
161 regulator-boot-on;
162
163 regulator-state-mem {
164 regulator-on-in-suspend;
165 regulator-suspend-max-microvolt = <3300000>;
166 regulator-suspend-min-microvolt = <3300000>;
167 };
168 };
169
170 dcdc3_reg: DCDC3 {
171 regulator-name = "DCDC3";
172 regulator-min-microvolt = <300000>;
173 regulator-max-microvolt = <1875000>;
174 regulator-always-on;
175 regulator-boot-on;
176
177 regulator-state-mem {
178 regulator-on-in-suspend;
179 regulator-suspend-max-microvolt = <1140000>;
180 regulator-suspend-min-microvolt = <1140000>;
181 };
182 };
183
184 /* Core4_1V2 */
185 dcdc4_reg: DCDC4 {
186 regulator-name = "DCDC4";
187 regulator-min-microvolt = <1200000>;
188 regulator-max-microvolt = <1200000>;
189 regulator-always-on;
190 regulator-boot-on;
191
192 regulator-state-mem {
193 regulator-on-in-suspend;
194 regulator-suspend-max-microvolt = <1140000>;
195 regulator-suspend-min-microvolt = <1140000>;
196 };
197 };
198
199 /* Core4_1V8 */
200 dcdc5_reg: DCDC5 {
201 regulator-name = "DCDC5";
202 regulator-min-microvolt = <1800000>;
203 regulator-max-microvolt = <1800000>;
204 regulator-always-on;
205 regulator-boot-on;
206
207 regulator-state-mem {
208 regulator-on-in-suspend;
209 regulator-suspend-max-microvolt = <1700000>;
210 regulator-suspend-min-microvolt = <1700000>;
211 };
212 };
213
214 ldo1_reg: LDO1 {
215 regulator-name = "LDO1";
216 regulator-boot-on;
217 };
218
219 /* Core1_3V3 */
220 ldo2_reg: LDO2 {
221 regulator-name = "LDO2";
222 regulator-always-on;
223 regulator-boot-on;
224
225 regulator-state-mem {
226 regulator-on-in-suspend;
227 regulator-suspend-max-microvolt = <3000000>;
228 regulator-suspend-min-microvolt = <3000000>;
229 };
230 };
231
232 /* Core5_1V2 */
233 ldo3_reg: LDO3 {
234 regulator-name = "LDO3";
235 regulator-always-on;
236 regulator-boot-on;
237 };
238
239 ldo4_reg: LDO4 {
240 regulator-name = "LDO4";
241 regulator-boot-on;
242 };
243
244 /* SPD_3V3 */
245 ldo5_reg: LDO5 {
246 regulator-name = "LDO5";
247 regulator-always-on;
248 regulator-boot-on;
249 };
250
251 /* DDR_0V6 */
252 ldo6_reg: LDO6 {
253 regulator-name = "LDO6";
254 regulator-always-on;
255 regulator-boot-on;
256 };
257
258 /* VDD_PWM */
259 ldo7_reg: LDO7 {
260 regulator-name = "LDO7";
261 regulator-boot-on;
262 };
263
264 /* ldo_1v8 */
265 ldo8_reg: LDO8 {
266 regulator-name = "LDO8";
267 regulator-min-microvolt = <1800000>;
268 regulator-max-microvolt = <1800000>;
269 regulator-boot-on;
270 };
271
272 ldo9_reg: LDO9 {
273 regulator-name = "LDO9";
274 regulator-boot-on;
275 };
276
277 ldo10_reg: LDO10 {
278 regulator-name = "LDO10";
279 regulator-boot-on;
280 };
281
282 ldortc1_reg: LDORTC1 {
283 regulator-name = "LDORTC1";
284 regulator-boot-on;
285 };
286 };
287 };
288};
289
290&snvs_rtc {
291 /* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
292 status = "disabled";
293};
294
295&uart1 {
296 status = "okay";
297};
298
299&usdhc1 {
300 non-removable;
301 no-1-8-v;
302 status = "okay";
303};
304
305&usdhc3 {
306 vmmc-supply = <&reg_wifi>;
307 mmc-pwrseq = <&wifi_pwrseq>;
308 cap-power-off-card;
309 non-removable;
310 status = "okay";
311};
312
313&usbotg1 {
314 pinctrl-names = "default";
315 disable-over-current;
316 srp-disable;
317 hnp-disable;
318 adp-disable;
319 status = "okay";
320};
arch/arm/boot/dts/emev2-kzm9d.dts+1−1
@@ -80,7 +80,7 @@ · 79 unmodified lines
80 };80 };
81 81
82 ethernet@20000000 {82 ethernet@20000000 {
83 compatible = "smsc,lan9220", "smsc,lan9115";83 compatible = "smsc,lan9221", "smsc,lan9115";
84 reg = <0x20000000 0x10000>;84 reg = <0x20000000 0x10000>;
85 phy-mode = "mii";85 phy-mode = "mii";
86 interrupt-parent = <&gpio0>;86 interrupt-parent = <&gpio0>;
arch/arm/boot/dts/exynos3250-rinato.dts+1−0
@@ -19,6 +19,7 @@ · 18 unmodified lines
19/ {19/ {
20 model = "Samsung Rinato board";20 model = "Samsung Rinato board";
21 compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";21 compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
22 chassis-type = "watch";
22 23
23 aliases {24 aliases {
24 i2c7 = &i2c_max77836;25 i2c7 = &i2c_max77836;
arch/arm/boot/dts/exynos4210-i9100.dts+1−0
@@ -18,6 +18,7 @@ · 17 unmodified lines
18/ {18/ {
19 model = "Samsung Galaxy S2 (GT-I9100)";19 model = "Samsung Galaxy S2 (GT-I9100)";
20 compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4";20 compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4";
21 chassis-type = "handset";
21 22
22 memory@40000000 {23 memory@40000000 {
23 device_type = "memory";24 device_type = "memory";
arch/arm/boot/dts/exynos4210-origen.dts+12−12
@@ -206,74 +206,74 @@ · 205 unmodified lines
206 ldo4_reg: LDO4 {206 ldo4_reg: LDO4 {
207 regulator-name = "VDD_RTC_1.8V";207 regulator-name = "VDD_RTC_1.8V";
208 regulator-min-microvolt = <1800000>;208 regulator-min-microvolt = <1800000>;
209 regulator-max-microvolt = <1800000>;209 regulator-max-microvolt = <1800000>;
210 regulator-always-on;210 regulator-always-on;
211 };211 };
212 212
213 ldo6_reg: LDO6 {213 ldo6_reg: LDO6 {
214 regulator-name = "VMIPI_1.8V";214 regulator-name = "VMIPI_1.8V";
215 regulator-min-microvolt = <1800000>;215 regulator-min-microvolt = <1800000>;
216 regulator-max-microvolt = <1800000>;216 regulator-max-microvolt = <1800000>;
217 regulator-always-on;217 regulator-always-on;
218 };218 };
219 219
220 ldo7_reg: LDO7 {220 ldo7_reg: LDO7 {
221 regulator-name = "VDD_AUD_1.8V";221 regulator-name = "VDD_AUD_1.8V";
222 regulator-min-microvolt = <1800000>;222 regulator-min-microvolt = <1800000>;
223 regulator-max-microvolt = <1800000>;223 regulator-max-microvolt = <1800000>;
224 };224 };
225 225
226 ldo8_reg: LDO8 {226 ldo8_reg: LDO8 {
227 regulator-name = "VADC_3.3V";227 regulator-name = "VADC_3.3V";
228 regulator-min-microvolt = <3300000>;228 regulator-min-microvolt = <3300000>;
229 regulator-max-microvolt = <3300000>;229 regulator-max-microvolt = <3300000>;
230 };230 };
231 231
232 ldo9_reg: LDO9 {232 ldo9_reg: LDO9 {
233 regulator-name = "DVDD_SWB_2.8V";233 regulator-name = "DVDD_SWB_2.8V";
234 regulator-min-microvolt = <2800000>;234 regulator-min-microvolt = <2800000>;
235 regulator-max-microvolt = <2800000>;235 regulator-max-microvolt = <2800000>;
236 regulator-always-on;236 regulator-always-on;
237 };237 };
238 238
239 ldo10_reg: LDO10 {239 ldo10_reg: LDO10 {
240 regulator-name = "VDD_PLL_1.1V";240 regulator-name = "VDD_PLL_1.1V";
241 regulator-min-microvolt = <1100000>;241 regulator-min-microvolt = <1100000>;
242 regulator-max-microvolt = <1100000>;242 regulator-max-microvolt = <1100000>;
243 regulator-always-on;243 regulator-always-on;
244 };244 };
245 245
246 ldo11_reg: LDO11 {246 ldo11_reg: LDO11 {
247 regulator-name = "VDD_AUD_3V";247 regulator-name = "VDD_AUD_3V";
248 regulator-min-microvolt = <3000000>;248 regulator-min-microvolt = <3000000>;
249 regulator-max-microvolt = <3000000>;249 regulator-max-microvolt = <3000000>;
250 };250 };
251 251
252 ldo14_reg: LDO14 {252 ldo14_reg: LDO14 {
253 regulator-name = "AVDD18_SWB_1.8V";253 regulator-name = "AVDD18_SWB_1.8V";
254 regulator-min-microvolt = <1800000>;254 regulator-min-microvolt = <1800000>;
255 regulator-max-microvolt = <1800000>;255 regulator-max-microvolt = <1800000>;
256 regulator-always-on;256 regulator-always-on;
257 };257 };
258 258
259 ldo17_reg: LDO17 {259 ldo17_reg: LDO17 {
260 regulator-name = "VDD_SWB_3.3V";260 regulator-name = "VDD_SWB_3.3V";
261 regulator-min-microvolt = <3300000>;261 regulator-min-microvolt = <3300000>;
262 regulator-max-microvolt = <3300000>;262 regulator-max-microvolt = <3300000>;
263 regulator-always-on;263 regulator-always-on;
264 };264 };
265 265
266 ldo21_reg: LDO21 {266 ldo21_reg: LDO21 {
267 regulator-name = "VDD_MIF_1.2V";267 regulator-name = "VDD_MIF_1.2V";
268 regulator-min-microvolt = <1200000>;268 regulator-min-microvolt = <1200000>;
269 regulator-max-microvolt = <1200000>;269 regulator-max-microvolt = <1200000>;
270 regulator-always-on;270 regulator-always-on;
271 };271 };
272 272
273 buck1_reg: BUCK1 {273 buck1_reg: BUCK1 {
274 regulator-name = "VDD_ARM_1.2V";274 regulator-name = "VDD_ARM_1.2V";
275 regulator-min-microvolt = <950000>;275 regulator-min-microvolt = <950000>;
276 regulator-max-microvolt = <1350000>;276 regulator-max-microvolt = <1350000>;
277 regulator-always-on;277 regulator-always-on;
278 regulator-boot-on;278 regulator-boot-on;
279 };279 };
@@ -281,7 +281,7 @@ · 1 unmodified line
281 buck2_reg: BUCK2 {281 buck2_reg: BUCK2 {
282 regulator-name = "VDD_INT_1.1V";282 regulator-name = "VDD_INT_1.1V";
283 regulator-min-microvolt = <900000>;283 regulator-min-microvolt = <900000>;
284 regulator-max-microvolt = <1100000>;284 regulator-max-microvolt = <1100000>;
285 regulator-always-on;285 regulator-always-on;
286 regulator-boot-on;286 regulator-boot-on;
287 };287 };
arch/arm/boot/dts/exynos4210-trats.dts+1−0
@@ -16,6 +16,7 @@ · 15 unmodified lines
16/ {16/ {
17 model = "Samsung Trats based on Exynos4210";17 model = "Samsung Trats based on Exynos4210";
18 compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";18 compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
19 chassis-type = "handset";
19 20
20 memory@40000000 {21 memory@40000000 {
21 device_type = "memory";22 device_type = "memory";
arch/arm/boot/dts/exynos4210-universal_c210.dts+1−0
@@ -16,6 +16,7 @@ · 15 unmodified lines
16/ {16/ {
17 model = "Samsung Universal C210 based on Exynos4210 rev0";17 model = "Samsung Universal C210 based on Exynos4210 rev0";
18 compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";18 compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
19 chassis-type = "handset";
19 20
20 memory@40000000 {21 memory@40000000 {
21 device_type = "memory";22 device_type = "memory";
arch/arm/boot/dts/exynos4412-i9300.dts+1−0
@@ -12,6 +12,7 @@ · 11 unmodified lines
12/ {12/ {
13 model = "Samsung Galaxy S3 (GT-I9300) based on Exynos4412";13 model = "Samsung Galaxy S3 (GT-I9300) based on Exynos4412";
14 compatible = "samsung,i9300", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";14 compatible = "samsung,i9300", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
15 chassis-type = "handset";
15 16
16 /* bootargs are passed in by bootloader */17 /* bootargs are passed in by bootloader */
17 18
arch/arm/boot/dts/exynos4412-i9305.dts+1−0
@@ -5,6 +5,7 @@ · 4 unmodified lines
5/ {5/ {
6 model = "Samsung Galaxy S3 (GT-I9305) based on Exynos4412";6 model = "Samsung Galaxy S3 (GT-I9305) based on Exynos4412";
7 compatible = "samsung,i9305", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";7 compatible = "samsung,i9305", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
8 chassis-type = "handset";
8 9
9 /* bootargs are passed in by bootloader */10 /* bootargs are passed in by bootloader */
10 11
arch/arm/boot/dts/exynos4412-n710x.dts+1−0
@@ -5,6 +5,7 @@ · 4 unmodified lines
5/ {5/ {
6 compatible = "samsung,n710x", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";6 compatible = "samsung,n710x", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
7 model = "Samsung Galaxy Note 2 (GT-N7100, GT-N7105) based on Exynos4412";7 model = "Samsung Galaxy Note 2 (GT-N7100, GT-N7105) based on Exynos4412";
8 chassis-type = "handset";
8 9
9 memory@40000000 {10 memory@40000000 {
10 device_type = "memory";11 device_type = "memory";
arch/arm/boot/dts/exynos4412-origen.dts+7−7
@@ -382,7 +382,7 @@ · 381 unmodified lines
382 buck1_reg: BUCK1 {382 buck1_reg: BUCK1 {
383 regulator-name = "VDD_MIF";383 regulator-name = "VDD_MIF";
384 regulator-min-microvolt = <950000>;384 regulator-min-microvolt = <950000>;
385 regulator-max-microvolt = <1100000>;385 regulator-max-microvolt = <1100000>;
386 regulator-always-on;386 regulator-always-on;
387 regulator-boot-on;387 regulator-boot-on;
388 op_mode = <1>; /* Normal Mode */388 op_mode = <1>; /* Normal Mode */
@@ -391,7 +391,7 @@ · 2 unmodified lines
391 buck2_reg: BUCK2 {391 buck2_reg: BUCK2 {
392 regulator-name = "VDD_ARM";392 regulator-name = "VDD_ARM";
393 regulator-min-microvolt = <900000>;393 regulator-min-microvolt = <900000>;
394 regulator-max-microvolt = <1350000>;394 regulator-max-microvolt = <1350000>;
395 regulator-always-on;395 regulator-always-on;
396 regulator-boot-on;396 regulator-boot-on;
397 op_mode = <1>; /* Normal Mode */397 op_mode = <1>; /* Normal Mode */
@@ -400,7 +400,7 @@ · 2 unmodified lines
400 buck3_reg: BUCK3 {400 buck3_reg: BUCK3 {
401 regulator-name = "VDD_INT";401 regulator-name = "VDD_INT";
402 regulator-min-microvolt = <900000>;402 regulator-min-microvolt = <900000>;
403 regulator-max-microvolt = <1200000>;403 regulator-max-microvolt = <1200000>;
404 regulator-always-on;404 regulator-always-on;
405 regulator-boot-on;405 regulator-boot-on;
406 op_mode = <1>; /* Normal Mode */406 op_mode = <1>; /* Normal Mode */
@@ -409,7 +409,7 @@ · 2 unmodified lines
409 buck4_reg: BUCK4 {409 buck4_reg: BUCK4 {
410 regulator-name = "VDD_G3D";410 regulator-name = "VDD_G3D";
411 regulator-min-microvolt = <750000>;411 regulator-min-microvolt = <750000>;
412 regulator-max-microvolt = <1500000>;412 regulator-max-microvolt = <1500000>;
413 regulator-always-on;413 regulator-always-on;
414 regulator-boot-on;414 regulator-boot-on;
415 op_mode = <1>; /* Normal Mode */415 op_mode = <1>; /* Normal Mode */
@@ -418,7 +418,7 @@ · 2 unmodified lines
418 buck5_reg: BUCK5 {418 buck5_reg: BUCK5 {
419 regulator-name = "VDD_M12";419 regulator-name = "VDD_M12";
420 regulator-min-microvolt = <750000>;420 regulator-min-microvolt = <750000>;
421 regulator-max-microvolt = <1500000>;421 regulator-max-microvolt = <1500000>;
422 regulator-always-on;422 regulator-always-on;
423 regulator-boot-on;423 regulator-boot-on;
424 op_mode = <1>; /* Normal Mode */424 op_mode = <1>; /* Normal Mode */
@@ -427,7 +427,7 @@ · 2 unmodified lines
427 buck6_reg: BUCK6 {427 buck6_reg: BUCK6 {
428 regulator-name = "VDD12_5M";428 regulator-name = "VDD12_5M";
429 regulator-min-microvolt = <750000>;429 regulator-min-microvolt = <750000>;
430 regulator-max-microvolt = <1500000>;430 regulator-max-microvolt = <1500000>;
431 regulator-always-on;431 regulator-always-on;
432 regulator-boot-on;432 regulator-boot-on;
433 op_mode = <1>; /* Normal Mode */433 op_mode = <1>; /* Normal Mode */
@@ -436,7 +436,7 @@ · 2 unmodified lines
436 buck9_reg: BUCK9 {436 buck9_reg: BUCK9 {
437 regulator-name = "VDDF28_EMMC";437 regulator-name = "VDDF28_EMMC";
438 regulator-min-microvolt = <750000>;438 regulator-min-microvolt = <750000>;
439 regulator-max-microvolt = <3000000>;439 regulator-max-microvolt = <3000000>;
440 regulator-always-on;440 regulator-always-on;
441 regulator-boot-on;441 regulator-boot-on;
442 op_mode = <1>; /* Normal Mode */442 op_mode = <1>; /* Normal Mode */
arch/arm/boot/dts/exynos4412-p4note-n8010.dts+1−0
@@ -12,6 +12,7 @@ · 11 unmodified lines
12/ {12/ {
13 model = "Samsung Galaxy Note 10.1 (GT-N8010/N8013) based on Exynos4412";13 model = "Samsung Galaxy Note 10.1 (GT-N8010/N8013) based on Exynos4412";
14 compatible = "samsung,n8010", "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";14 compatible = "samsung,n8010", "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
15 chassis-type = "tablet";
15 16
16 /* this is the base variant without any kind of modem */17 /* this is the base variant without any kind of modem */
17};18};
arch/arm/boot/dts/exynos4412-trats2.dts+1−0
@@ -15,6 +15,7 @@ · 14 unmodified lines
15/ {15/ {
16 model = "Samsung Trats 2 based on Exynos4412";16 model = "Samsung Trats 2 based on Exynos4412";
17 compatible = "samsung,trats2", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";17 compatible = "samsung,trats2", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
18 chassis-type = "handset";
18 19
19 memory@40000000 {20 memory@40000000 {
20 device_type = "memory";21 device_type = "memory";
arch/arm/boot/dts/exynos5250-arndale.dts+0−3
@@ -240,9 +240,6 @@ · 239 unmodified lines
240 vinl8-supply = <&buck8_reg>;240 vinl8-supply = <&buck8_reg>;
241 vinl9-supply = <&buck8_reg>;241 vinl9-supply = <&buck8_reg>;
242 242
243 s5m8767,pmic-buck2-dvs-voltage = <1300000>;
244 s5m8767,pmic-buck3-dvs-voltage = <1100000>;
245 s5m8767,pmic-buck4-dvs-voltage = <1200000>;
246 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,243 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
247 <&gpd1 1 GPIO_ACTIVE_HIGH>,244 <&gpd1 1 GPIO_ACTIVE_HIGH>,
248 <&gpd1 2 GPIO_ACTIVE_HIGH>;245 <&gpd1 2 GPIO_ACTIVE_HIGH>;
arch/arm/boot/dts/exynos5250-snow-rev5.dts+1−0
@@ -14,6 +14,7 @@ · 13 unmodified lines
14 model = "Google Snow Rev 5+";14 model = "Google Snow Rev 5+";
15 compatible = "google,snow-rev5", "samsung,exynos5250",15 compatible = "google,snow-rev5", "samsung,exynos5250",
16 "samsung,exynos5";16 "samsung,exynos5";
17 chassis-type = "laptop";
17 18
18 sound {19 sound {
19 compatible = "google,snow-audio-max98090";20 compatible = "google,snow-audio-max98090";
arch/arm/boot/dts/exynos5250-snow.dts+1−0
@@ -12,6 +12,7 @@ · 11 unmodified lines
12 model = "Google Snow";12 model = "Google Snow";
13 compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250",13 compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250",
14 "samsung,exynos5";14 "samsung,exynos5";
15 chassis-type = "laptop";
15 16
16 sound {17 sound {
17 compatible = "google,snow-audio-max98095";18 compatible = "google,snow-audio-max98095";
arch/arm/boot/dts/exynos5250-spring.dts+1−0
@@ -16,6 +16,7 @@ · 15 unmodified lines
16/ {16/ {
17 model = "Google Spring";17 model = "Google Spring";
18 compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";18 compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
19 chassis-type = "laptop";
19 20
20 memory@40000000 {21 memory@40000000 {
21 device_type = "memory";22 device_type = "memory";
arch/arm/boot/dts/exynos5250.dtsi+0−1
@@ -386,7 +386,6 @@ · 385 unmodified lines
386 386
387 sata: sata@122f0000 {387 sata: sata@122f0000 {
388 compatible = "snps,dwc-ahci";388 compatible = "snps,dwc-ahci";
389 samsung,sata-freq = <66>;
390 reg = <0x122F0000 0x1ff>;389 reg = <0x122F0000 0x1ff>;
391 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;390 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
392 clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;391 clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
arch/arm/boot/dts/exynos5420-peach-pit.dts+1−0
@@ -26,6 +26,7 @@ · 25 unmodified lines
26 "google,pit-rev7", "google,pit-rev6",26 "google,pit-rev7", "google,pit-rev6",
27 "google,pit", "google,peach","samsung,exynos5420",27 "google,pit", "google,peach","samsung,exynos5420",
28 "samsung,exynos5";28 "samsung,exynos5";
29 chassis-type = "laptop";
29 30
30 aliases {31 aliases {
31 /* Assign 20 so we don't get confused w/ builtin ones */32 /* Assign 20 so we don't get confused w/ builtin ones */
arch/arm/boot/dts/exynos5800-peach-pi.dts+1−0
@@ -24,6 +24,7 @@ · 23 unmodified lines
24 "google,pi-rev11", "google,pi-rev10",24 "google,pi-rev11", "google,pi-rev10",
25 "google,pi", "google,peach", "samsung,exynos5800",25 "google,pi", "google,peach", "samsung,exynos5800",
26 "samsung,exynos5";26 "samsung,exynos5";
27 chassis-type = "laptop";
27 28
28 aliases {29 aliases {
29 /* Assign 20 so we don't get confused w/ builtin ones */30 /* Assign 20 so we don't get confused w/ builtin ones */
arch/arm/boot/dts/gemini-dlink-dir-685.dts+0−18
@@ -439,24 +439,6 @@ · 438 unmodified lines
439 439
440 pci@50000000 {440 pci@50000000 {
441 status = "okay";441 status = "okay";
442 interrupt-map-mask = <0xf800 0 0 7>;
443 interrupt-map =
444 <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
445 <0x4800 0 0 2 &pci_intc 1>,
446 <0x4800 0 0 3 &pci_intc 2>,
447 <0x4800 0 0 4 &pci_intc 3>,
448 <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
449 <0x5000 0 0 2 &pci_intc 2>,
450 <0x5000 0 0 3 &pci_intc 3>,
451 <0x5000 0 0 4 &pci_intc 0>,
452 <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
453 <0x5800 0 0 2 &pci_intc 3>,
454 <0x5800 0 0 3 &pci_intc 0>,
455 <0x5800 0 0 4 &pci_intc 1>,
456 <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
457 <0x6000 0 0 2 &pci_intc 0>,
458 <0x6000 0 0 3 &pci_intc 1>,
459 <0x6000 0 0 4 &pci_intc 2>;
460 };442 };
461 443
462 ethernet@60000000 {444 ethernet@60000000 {
arch/arm/boot/dts/gemini-ns2502.dts+148−0
@@ -0,0 +1,148 @@
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
4 * Device Tree file for Edimax NS 2502
5 */
6
7/dts-v1/;
8
9#include "gemini.dtsi"
10
11/ {
12 model = "Edimax NS-2502";
13 compatible = "edimax,ns-2502", "cortina,gemini";
14 #address-cells = <1>;
15 #size-cells = <1>;
16
17 memory@0 {
18 /* 128 MB */
19 device_type = "memory";
20 reg = <0x00000000 0x8000000>;
21 };
22
23 aliases {
24 mdio-gpio0 = &mdio0;
25 };
26
27 chosen {
28 bootargs = "console=ttyS0,19200n8";
29 stdout-path = &uart0;
30 };
31
32 mdio0: mdio {
33 compatible = "virtual,mdio-gpio";
34 gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
35 <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
36 #address-cells = <1>;
37 #size-cells = <0>;
38
39 phy0: ethernet-phy@1 {
40 reg = <1>;
41 device_type = "ethernet-phy";
42 /* We lack the knowledge of necessary GPIO to achieve
43 * Gigabit
44 */
45 max-speed = <100>;
46 };
47 };
48};
49
50&ethernet {
51 status = "okay";
52 ethernet-port@0 {
53 phy-mode = "rgmii";
54 phy-handle = <&phy0>;
55 };
56};
57
58&flash {
59 status = "okay";
60 /* 8MB of flash */
61 reg = <0x30000000 0x00800000>;
62
63 pinctrl-names = "enabled", "disabled";
64 pinctrl-0 = <&pflash_default_pins>;
65 pinctrl-1 = <&pflash_disabled_pins>;
66
67 partitions {
68 compatible = "fixed-partitions";
69 #address-cells = <1>;
70 #size-cells = <1>;
71
72 partition@0 {
73 label = "RedBoot";
74 reg = <0x00000000 0x00020000>;
75 };
76 partition@20000 {
77 label = "kernel";
78 reg = <0x00020000 0x00700000>;
79 };
80 partition@720000 {
81 label = "VCTL";
82 reg = <0x00720000 0x00020000>;
83 };
84 partition@740000 {
85 label = "CurConf";
86 reg = <0x00740000 0x000a0000>;
87 };
88 partition@7e0000 {
89 label = "FIS";
90 reg = <0x007e0000 0x00010000>;
91 };
92 };
93};
94
95&gpio0 {
96 pinctrl-names = "default";
97 pinctrl-0 = <&gpio0_default_pins>;
98};
99
100&ide0 {
101 status = "okay";
102};
103
104&ide1 {
105 status = "okay";
106};
107
108&sata {
109 cortina,gemini-ata-muxmode = <3>;
110 cortina,gemini-enable-sata-bridge;
111 status = "okay";
112};
113
114&syscon {
115 pinctrl {
116 /*
117 * gpio0agrp cover line 0-4
118 * gpio0bgrp cover line 5
119 */
120 gpio0_default_pins: pinctrl-gpio0 {
121 mux {
122 function = "gpio0";
123 groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp";
124 };
125 };
126 pflash_disabled_pins: pinctrl-pflash-disabled {
127 mux {
128 function = "gpio0";
129 groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
130 "gpio0kgrp";
131 };
132 };
133 pinctrl-gmii {
134 mux {
135 function = "gmii";
136 groups = "gmii_gmac0_grp";
137 };
138 };
139 };
140};
141
142&usb0 {
143 status = "okay";
144};
145
146&usb1 {
147 status = "okay";
148};
arch/arm/boot/dts/gemini-sl93512r.dts+0−18
@@ -256,24 +256,6 @@ · 255 unmodified lines
256 256
257 pci@50000000 {257 pci@50000000 {
258 status = "okay";258 status = "okay";
259 interrupt-map-mask = <0xf800 0 0 7>;
260 interrupt-map =
261 <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
262 <0x4800 0 0 2 &pci_intc 1>,
263 <0x4800 0 0 3 &pci_intc 2>,
264 <0x4800 0 0 4 &pci_intc 3>,
265 <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
266 <0x5000 0 0 2 &pci_intc 2>,
267 <0x5000 0 0 3 &pci_intc 3>,
268 <0x5000 0 0 4 &pci_intc 0>,
269 <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
270 <0x5800 0 0 2 &pci_intc 3>,
271 <0x5800 0 0 3 &pci_intc 0>,
272 <0x5800 0 0 4 &pci_intc 1>,
273 <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
274 <0x6000 0 0 2 &pci_intc 0>,
275 <0x6000 0 0 3 &pci_intc 1>,
276 <0x6000 0 0 4 &pci_intc 2>;
277 };259 };
278 260
279 ethernet@60000000 {261 ethernet@60000000 {
arch/arm/boot/dts/gemini-sq201.dts+0−18
@@ -252,24 +252,6 @@ · 251 unmodified lines
252 252
253 pci@50000000 {253 pci@50000000 {
254 status = "okay";254 status = "okay";
255 interrupt-map-mask = <0xf800 0 0 7>;
256 interrupt-map =
257 <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
258 <0x4800 0 0 2 &pci_intc 1>,
259 <0x4800 0 0 3 &pci_intc 2>,
260 <0x4800 0 0 4 &pci_intc 3>,
261 <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
262 <0x5000 0 0 2 &pci_intc 2>,
263 <0x5000 0 0 3 &pci_intc 3>,
264 <0x5000 0 0 4 &pci_intc 0>,
265 <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
266 <0x5800 0 0 2 &pci_intc 3>,
267 <0x5800 0 0 3 &pci_intc 0>,
268 <0x5800 0 0 4 &pci_intc 1>,
269 <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
270 <0x6000 0 0 2 &pci_intc 0>,
271 <0x6000 0 0 3 &pci_intc 1>,
272 <0x6000 0 0 4 &pci_intc 2>;
273 };255 };
274 256
275 ethernet@60000000 {257 ethernet@60000000 {
arch/arm/boot/dts/gemini-ssi1328.dts+138−0
@@ -0,0 +1,138 @@
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
4 * Device Tree file for SSI 1328
5 */
6
7/dts-v1/;
8
9#include "gemini.dtsi"
10
11/ {
12 model = "SSI 1328";
13 compatible = "ssi,1328", "cortina,gemini";
14 #address-cells = <1>;
15 #size-cells = <1>;
16
17 memory@0 {
18 /* 128 MB */
19 device_type = "memory";
20 reg = <0x00000000 0x8000000>;
21 };
22
23 aliases {
24 mdio-gpio0 = &mdio0;
25 };
26
27 chosen {
28 bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
29 stdout-path = &uart0;
30 };
31
32 mdio0: mdio {
33 compatible = "virtual,mdio-gpio";
34 gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
35 <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
36 #address-cells = <1>;
37 #size-cells = <0>;
38
39 /* LAN Marvell 88E1118 */
40 phy0: ethernet-phy@1 {
41 reg = <1>;
42 device_type = "ethernet-phy";
43 /* We lack the knowledge of necessary GPIO to achieve
44 * Gigabit
45 */
46 max-speed = <100>;
47 };
48 /* WAN ICPlus IP101A */
49 phy1: ethernet-phy@2 {
50 reg = <2>;
51 device_type = "ethernet-phy";
52 };
53 };
54};
55
56&ethernet {
57 status = "okay";
58 ethernet-port@0 {
59 phy-mode = "rgmii";
60 phy-handle = <&phy0>;
61 };
62 ethernet-port@1 {
63 phy-mode = "rgmii";
64 phy-handle = <&phy1>;
65 };
66};
67
68&flash {
69 status = "okay";
70 /* 32MB of flash */
71 reg = <0x30000000 0x03200000>;
72
73 pinctrl-names = "enabled", "disabled";
74 pinctrl-0 = <&pflash_default_pins>;
75 pinctrl-1 = <&pflash_disabled_pins>;
76
77 partitions {
78 compatible = "redboot-fis";
79 /* Eraseblock at 0xfe0000 */
80 fis-index-block = <0x7F>;
81 };
82};
83
84&gpio0 {
85 pinctrl-names = "default";
86 pinctrl-0 = <&gpio0_default_pins>;
87};
88
89&ide0 {
90 status = "okay";
91};
92
93&ide1 {
94 status = "okay";
95};
96
97&sata {
98 cortina,gemini-ata-muxmode = <0>;
99 cortina,gemini-enable-sata-bridge;
100 status = "okay";
101};
102
103&syscon {
104 pinctrl {
105 /*
106 * gpio0agrp cover line 0-4
107 * gpio0bgrp cover line 5
108 */
109 gpio0_default_pins: pinctrl-gpio0 {
110 mux {
111 function = "gpio0";
112 groups = "gpio0agrp", "gpio0bgrp";
113 };
114 };
115 pflash_disabled_pins: pinctrl-pflash-disabled {
116 mux {
117 function = "gpio0";
118 groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
119 "gpio0kgrp";
120 };
121 };
122 pinctrl-gmii {
123 /* This platform use both the ethernet ports */
124 mux {
125 function = "gmii";
126 groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
127 };
128 };
129 };
130};
131
132&usb0 {
133 status = "okay";
134};
135
136&usb1 {
137 status = "okay";
138};
arch/arm/boot/dts/gemini-wbd111.dts+0−18
@@ -140,24 +140,6 @@ · 139 unmodified lines
140 140
141 pci@50000000 {141 pci@50000000 {
142 status = "okay";142 status = "okay";
143 interrupt-map-mask = <0xf800 0 0 7>;
144 interrupt-map =
145 <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
146 <0x4800 0 0 2 &pci_intc 1>,
147 <0x4800 0 0 3 &pci_intc 2>,
148 <0x4800 0 0 4 &pci_intc 3>,
149 <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
150 <0x5000 0 0 2 &pci_intc 2>,
151 <0x5000 0 0 3 &pci_intc 3>,
152 <0x5000 0 0 4 &pci_intc 0>,
153 <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
154 <0x5800 0 0 2 &pci_intc 3>,
155 <0x5800 0 0 3 &pci_intc 0>,
156 <0x5800 0 0 4 &pci_intc 1>,
157 <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
158 <0x6000 0 0 2 &pci_intc 0>,
159 <0x6000 0 0 3 &pci_intc 1>,
160 <0x6000 0 0 4 &pci_intc 2>;
161 };143 };
162 144
163 ethernet@60000000 {145 ethernet@60000000 {
arch/arm/boot/dts/gemini-wbd222.dts+0−18
@@ -151,24 +151,6 @@ · 150 unmodified lines
151 151
152 pci@50000000 {152 pci@50000000 {
153 status = "okay";153 status = "okay";
154 interrupt-map-mask = <0xf800 0 0 7>;
155 interrupt-map =
156 <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
157 <0x4800 0 0 2 &pci_intc 1>,
158 <0x4800 0 0 3 &pci_intc 2>,
159 <0x4800 0 0 4 &pci_intc 3>,
160 <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
161 <0x5000 0 0 2 &pci_intc 2>,
162 <0x5000 0 0 3 &pci_intc 3>,
163 <0x5000 0 0 4 &pci_intc 0>,
164 <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
165 <0x5800 0 0 2 &pci_intc 3>,
166 <0x5800 0 0 3 &pci_intc 0>,
167 <0x5800 0 0 4 &pci_intc 1>,
168 <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
169 <0x6000 0 0 2 &pci_intc 0>,
170 <0x6000 0 0 3 &pci_intc 1>,
171 <0x6000 0 0 4 &pci_intc 2>;
172 };154 };
173 155
174 ethernet@60000000 {156 ethernet@60000000 {
arch/arm/boot/dts/gemini.dtsi+26−7
@@ -16,7 +16,7 @@ · 15 unmodified lines
16 compatible = "simple-bus";16 compatible = "simple-bus";
17 interrupt-parent = <&intcon>;17 interrupt-parent = <&intcon>;
18 18
19 flash@30000000 {19 flash: flash@30000000 {
20 compatible = "cortina,gemini-flash", "cfi-flash";20 compatible = "cortina,gemini-flash", "cfi-flash";
21 syscon = <&syscon>;21 syscon = <&syscon>;
22 pinctrl-names = "default";22 pinctrl-names = "default";
@@ -289,9 +289,28 @@ · 266 unmodified lines
289 device_type = "pci";289 device_type = "pci";
290 #address-cells = <3>;290 #address-cells = <3>;
291 #size-cells = <2>;291 #size-cells = <2>;
292 #interrupt-cells = <1>;
293 status = "disabled";292 status = "disabled";
294 293
294 #interrupt-cells = <1>;
295 interrupt-map-mask = <0xf800 0 0 7>;
296 interrupt-map =
297 <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
298 <0x4800 0 0 2 &pci_intc 1>,
299 <0x4800 0 0 3 &pci_intc 2>,
300 <0x4800 0 0 4 &pci_intc 3>,
301 <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
302 <0x5000 0 0 2 &pci_intc 2>,
303 <0x5000 0 0 3 &pci_intc 3>,
304 <0x5000 0 0 4 &pci_intc 0>,
305 <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
306 <0x5800 0 0 2 &pci_intc 3>,
307 <0x5800 0 0 3 &pci_intc 0>,
308 <0x5800 0 0 4 &pci_intc 1>,
309 <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
310 <0x6000 0 0 2 &pci_intc 0>,
311 <0x6000 0 0 3 &pci_intc 1>,
312 <0x6000 0 0 4 &pci_intc 2>;
313
295 bus-range = <0x00 0xff>;314 bus-range = <0x00 0xff>;
296 /* PCI ranges mappings */315 /* PCI ranges mappings */
297 ranges =316 ranges =
@@ -322,7 +341,7 @@ · 24 unmodified lines
322 };341 };
323 };342 };
324 343
325 ethernet@60000000 {344 ethernet: ethernet@60000000 {
326 compatible = "cortina,gemini-ethernet";345 compatible = "cortina,gemini-ethernet";
327 reg = <0x60000000 0x4000>, /* Global registers, queue */346 reg = <0x60000000 0x4000>, /* Global registers, queue */
328 <0x60004000 0x2000>, /* V-bit */347 <0x60004000 0x2000>, /* V-bit */
@@ -365,7 +384,7 @@ · 36 unmodified lines
365 clocks = <&syscon GEMINI_CLK_GATE_SECURITY>;384 clocks = <&syscon GEMINI_CLK_GATE_SECURITY>;
366 };385 };
367 386
368 ide@63000000 {387 ide0: ide@63000000 {
369 compatible = "cortina,gemini-pata", "faraday,ftide010";388 compatible = "cortina,gemini-pata", "faraday,ftide010";
370 reg = <0x63000000 0x1000>;389 reg = <0x63000000 0x1000>;
371 interrupts = <4 IRQ_TYPE_EDGE_RISING>;390 interrupts = <4 IRQ_TYPE_EDGE_RISING>;
@@ -378,7 +397,7 @@ · 6 unmodified lines
378 #size-cells = <0>;397 #size-cells = <0>;
379 };398 };
380 399
381 ide@63400000 {400 ide1: ide@63400000 {
382 compatible = "cortina,gemini-pata", "faraday,ftide010";401 compatible = "cortina,gemini-pata", "faraday,ftide010";
383 reg = <0x63400000 0x1000>;402 reg = <0x63400000 0x1000>;
384 interrupts = <5 IRQ_TYPE_EDGE_RISING>;403 interrupts = <5 IRQ_TYPE_EDGE_RISING>;
@@ -421,7 +440,7 @@ · 36 unmodified lines
421 status = "disabled";440 status = "disabled";
422 };441 };
423 442
424 usb@68000000 {443 usb0: usb@68000000 {
425 compatible = "cortina,gemini-usb", "faraday,fotg210";444 compatible = "cortina,gemini-usb", "faraday,fotg210";
426 reg = <0x68000000 0x1000>;445 reg = <0x68000000 0x1000>;
427 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;446 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
@@ -442,7 +461,7 @@ · 14 unmodified lines
442 status = "disabled";461 status = "disabled";
443 };462 };
444 463
445 usb@69000000 {464 usb1: usb@69000000 {
446 compatible = "cortina,gemini-usb", "faraday,fotg210";465 compatible = "cortina,gemini-usb", "faraday,fotg210";
447 reg = <0x69000000 0x1000>;466 reg = <0x69000000 0x1000>;
448 interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;467 interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
arch/arm/boot/dts/imx6dl-alti6p.dts+1−1
@@ -192,7 +192,7 @@ · 191 unmodified lines
192};192};
193 193
194&ecspi1 {194&ecspi1 {
195 cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;195 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
196 pinctrl-names = "default";196 pinctrl-names = "default";
197 pinctrl-0 = <&pinctrl_ecspi1>;197 pinctrl-0 = <&pinctrl_ecspi1>;
198 status = "okay";198 status = "okay";
arch/arm/boot/dts/imx6dl-b1x5v2.dtsi+0−1
@@ -47,7 +47,6 @@ · 46 unmodified lines
47 mpl3115a2: pressure-sensor@60 {47 mpl3115a2: pressure-sensor@60 {
48 compatible = "fsl,mpl3115";48 compatible = "fsl,mpl3115";
49 reg = <0x60>;49 reg = <0x60>;
50 vcc-supply = <&reg_3v3_acm>;
51 50
52 /*51 /*
53 * The MPL3115 interrupts are connected to pin 22 and 2352 * The MPL3115 interrupts are connected to pin 22 and 23
arch/arm/boot/dts/imx6dl-prtrvt.dts+0−2
@@ -67,11 +67,9 @@ · 66 unmodified lines
67 ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,67 ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
68 <&gpio5 11 GPIO_ACTIVE_LOW>;68 <&gpio5 11 GPIO_ACTIVE_LOW>;
69 vin-supply = <&reg_3v3>;69 vin-supply = <&reg_3v3>;
70 vin-voltage-override = <3100000>;
71 autosuspend-delay = <30000>;70 autosuspend-delay = <30000>;
72 irq-status-read-quirk;71 irq-status-read-quirk;
73 en2-rf-quirk;72 en2-rf-quirk;
74 t5t-rmb-extra-byte-quirk;
75 status = "okay";73 status = "okay";
76 };74 };
77};75};
arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts+1−0
@@ -6,6 +6,7 @@ · 5 unmodified lines
6#include "imx6dl.dtsi"6#include "imx6dl.dtsi"
7#include "imx6qdl-skov-cpu.dtsi"7#include "imx6qdl-skov-cpu.dtsi"
8#include "imx6qdl-skov-cpu-revc.dtsi"8#include "imx6qdl-skov-cpu-revc.dtsi"
9#include "imx6qdl-skov-revc-lt2.dtsi"
9 10
10/ {11/ {
11 model = "SKOV IMX6 CPU SoloCore";12 model = "SKOV IMX6 CPU SoloCore";
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi+0−8
@@ -296,14 +296,6 @@ · 295 unmodified lines
296 reg = <2>;296 reg = <2>;
297 color = <LED_COLOR_ID_BLUE>;297 color = <LED_COLOR_ID_BLUE>;
298 };298 };
299
300 chan@3 {
301 chan-name = "W";
302 led-cur = /bits/ 8 <0x0>;
303 max-cur = /bits/ 8 <0x0>;
304 reg = <3>;
305 color = <LED_COLOR_ID_WHITE>;
306 };
307 };299 };
308 300
309 eeprom@57 {301 eeprom@57 {
arch/arm/boot/dts/imx6q-skov-revc-lt2.dts+1−0
@@ -6,6 +6,7 @@ · 5 unmodified lines
6#include "imx6q.dtsi"6#include "imx6q.dtsi"
7#include "imx6qdl-skov-cpu.dtsi"7#include "imx6qdl-skov-cpu.dtsi"
8#include "imx6qdl-skov-cpu-revc.dtsi"8#include "imx6qdl-skov-cpu-revc.dtsi"
9#include "imx6qdl-skov-revc-lt2.dtsi"
9 10
10/ {11/ {
11 model = "SKOV IMX6 CPU QuadCore";12 model = "SKOV IMX6 CPU QuadCore";
arch/arm/boot/dts/imx6qdl-apalis.dtsi+4−3
@@ -310,10 +310,10 @@ · 309 unmodified lines
310 st,mod-12b = <1>;310 st,mod-12b = <1>;
311 /* internal ADC reference */311 /* internal ADC reference */
312 st,ref-sel = <0>;312 st,ref-sel = <0>;
313 /* ADC converstion time: 80 clocks */313 /* ADC conversion time: 80 clocks */
314 st,sample-time = <4>;314 st,sample-time = <4>;
315 315
316 stmpe_touchscreen {316 stmpe_touchscreen: stmpe-touchscreen {
317 compatible = "st,stmpe-ts";317 compatible = "st,stmpe-ts";
318 /* 8 sample average control */318 /* 8 sample average control */
319 st,ave-ctrl = <3>;319 st,ave-ctrl = <3>;
@@ -330,10 +330,11 @@ · 10 unmodified lines
330 st,touch-det-delay = <5>;330 st,touch-det-delay = <5>;
331 };331 };
332 332
333 stmpe_adc {333 stmpe_adc: stmpe-adc {
334 compatible = "st,stmpe-adc";334 compatible = "st,stmpe-adc";
335 /* forbid to use ADC channels 3-0 (touch) */335 /* forbid to use ADC channels 3-0 (touch) */
336 st,norequest-mask = <0x0F>;336 st,norequest-mask = <0x0F>;
337 #io-channel-cells = <1>;
337 };338 };
338 };339 };
339};340};
arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi+26−5
@@ -145,8 +145,11 @@ · 144 unmodified lines
145};145};
146 146
147&i2c1 {147&i2c1 {
148 pinctrl-names = "default";148 pinctrl-names = "default", "gpio";
149 pinctrl-0 = <&pinctrl_i2c1>;149 pinctrl-0 = <&pinctrl_i2c1>;
150 pinctrl-1 = <&pinctrl_i2c1_gpio>;
151 scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
152 sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
150 clock-frequency = <400000>;153 clock-frequency = <400000>;
151 status = "disabled";154 status = "disabled";
152 155
@@ -185,8 +188,11 @@ · 32 unmodified lines
185};188};
186 189
187&i2c2 {190&i2c2 {
188 pinctrl-names = "default";191 pinctrl-names = "default", "gpio";
189 pinctrl-0 = <&pinctrl_i2c2>;192 pinctrl-0 = <&pinctrl_i2c2>;
193 pinctrl-1 = <&pinctrl_i2c2_gpio>;
194 scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
195 sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
190 clock-frequency = <100000>;196 clock-frequency = <100000>;
191 status = "disabled";197 status = "disabled";
192};198};
@@ -256,6 +262,7 @@ · 63 unmodified lines
256 pinctrl-0 = <&pinctrl_usdhc1>;262 pinctrl-0 = <&pinctrl_usdhc1>;
257 cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;263 cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
258 no-1-8-v;264 no-1-8-v;
265 disable-wp;
259 status = "disabled";266 status = "disabled";
260};267};
261 268
@@ -299,6 +306,20 @@ · 37 unmodified lines
299 >;306 >;
300 };307 };
301 308
309 pinctrl_i2c1: i2c1grp {
310 fsl,pins = <
311 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
312 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
313 >;
314 };
315
316 pinctrl_i2c1_gpio: i2c1gpiogrp {
317 fsl,pins = <
318 MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1
319 MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1
320 >;
321 };
322
302 pinctrl_i2c2: i2c2grp {323 pinctrl_i2c2: i2c2grp {
303 fsl,pins = <324 fsl,pins = <
304 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1325 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
@@ -306,10 +327,10 @@ · 1 unmodified line
306 >;327 >;
307 };328 };
308 329
309 pinctrl_i2c1: i2c1grp {330 pinctrl_i2c2_gpio: i2c2gpiogrp {
310 fsl,pins = <331 fsl,pins = <
311 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1332 MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
312 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1333 MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
313 >;334 >;
314 };335 };
315 336
arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi+11−1
@@ -78,8 +78,11 @@ · 77 unmodified lines
78};78};
79 79
80&i2c3 {80&i2c3 {
81 pinctrl-names = "default";81 pinctrl-names = "default", "gpio";
82 pinctrl-0 = <&pinctrl_i2c3>;82 pinctrl-0 = <&pinctrl_i2c3>;
83 pinctrl-1 = <&pinctrl_i2c3_gpio>;
84 scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
85 sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
83 clock-frequency = <400000>;86 clock-frequency = <400000>;
84 status = "okay";87 status = "okay";
85 88
@@ -259,6 +262,13 @@ · 173 unmodified lines
259 >;262 >;
260 };263 };
261 264
265 pinctrl_i2c3_gpio: i2c3gpiogrp {
266 fsl,pins = <
267 MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
268 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1
269 >;
270 };
271
262 pinctrl_ecspi1: ecspi1grp {272 pinctrl_ecspi1: ecspi1grp {
263 fsl,pins = <273 fsl,pins = <
264 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1274 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi+99−0
@@ -0,0 +1,99 @@
1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2//
3// Copyright (C) 2021 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
4
5/ {
6 backlight: backlight {
7 compatible = "pwm-backlight";
8 pinctrl-names = "default";
9 pinctrl-0 = <&pinctrl_backlight>;
10 enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
11 pwms = <&pwm2 0 20000 0>;
12 brightness-levels = <0 255>;
13 num-interpolated-steps = <17>;
14 default-brightness-level = <8>;
15 power-supply = <&reg_24v0>;
16 };
17
18 display {
19 #address-cells = <1>;
20 #size-cells = <0>;
21
22 compatible = "fsl,imx-parallel-display";
23 pinctrl-names = "default";
24 pinctrl-0 = <&pinctrl_ipu1>;
25
26 port@0 {
27 reg = <0>;
28
29 display0_in: endpoint {
30 remote-endpoint = <&ipu1_di0_disp0>;
31 };
32 };
33
34 port@1 {
35 reg = <1>;
36
37 display0_out: endpoint {
38 remote-endpoint = <&panel_in>;
39 };
40 };
41 };
42
43 panel {
44 compatible = "logictechno,lttd800480070-l2rt";
45 backlight = <&backlight>;
46 power-supply = <&reg_3v3>;
47
48 port {
49 panel_in: endpoint {
50 remote-endpoint = <&display0_out>;
51 };
52 };
53 };
54};
55
56&ipu1_di0_disp0 {
57 remote-endpoint = <&display0_in>;
58};
59
60&iomuxc {
61 pinctrl_backlight: backlightgrp {
62 fsl,pins = <
63 MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x58
64 >;
65 };
66
67 pinctrl_ipu1: ipu1grp {
68 fsl,pins = <
69 MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
70 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
71 MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
72 MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
73 MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
74 MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
75 MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
76 MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
77 MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
78 MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
79 MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
80 MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
81 MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
82 MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
83 MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
84 MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
85 MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
86 MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
87 MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
88 MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
89 MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
90 MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
91 MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
92 MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
93 MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
94 MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
95 MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
96 MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
97 >;
98 };
99};
arch/arm/boot/dts/imx6qdl-tqma6.dtsi+1−1
@@ -20,7 +20,7 @@ · 19 unmodified lines
20&ecspi1 {20&ecspi1 {
21 pinctrl-names = "default";21 pinctrl-names = "default";
22 pinctrl-0 = <&pinctrl_ecspi1>;22 pinctrl-0 = <&pinctrl_ecspi1>;
23 cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;23 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
24 status = "okay";24 status = "okay";
25 25
26 m25p80: flash@0 {26 m25p80: flash@0 {
arch/arm/boot/dts/imx6qdl.dtsi+3−4
@@ -264,7 +264,7 @@ · 263 unmodified lines
264 };264 };
265 265
266 pcie: pcie@1ffc000 {266 pcie: pcie@1ffc000 {
267 compatible = "fsl,imx6q-pcie", "snps,dw-pcie";267 compatible = "fsl,imx6q-pcie";
268 reg = <0x01ffc000 0x04000>,268 reg = <0x01ffc000 0x04000>,
269 <0x01f00000 0x80000>;269 <0x01f00000 0x80000>;
270 reg-names = "dbi", "config";270 reg-names = "dbi", "config";
@@ -272,10 +272,9 @@ · 1 unmodified line
272 #size-cells = <2>;272 #size-cells = <2>;
273 device_type = "pci";273 device_type = "pci";
274 bus-range = <0x00 0xff>;274 bus-range = <0x00 0xff>;
275 ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */275 ranges = <0x81000000 0 0 0x01f80000 0 0x00010000>, /* downstream I/O */
276 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */276 <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
277 num-lanes = <1>;277 num-lanes = <1>;
278 num-viewport = <4>;
279 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;278 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
280 interrupt-names = "msi";279 interrupt-names = "msi";
281 #interrupt-cells = <1>;280 #interrupt-cells = <1>;
arch/arm/boot/dts/imx6qp-prtwd3.dts+2−2
@@ -123,7 +123,7 @@ · 122 unmodified lines
123};123};
124 124
125&ecspi2 {125&ecspi2 {
126 cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;126 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
127 pinctrl-names = "default";127 pinctrl-names = "default";
128 pinctrl-0 = <&pinctrl_ecspi2>;128 pinctrl-0 = <&pinctrl_ecspi2>;
129 status = "okay";129 status = "okay";
@@ -189,7 +189,7 @@ · 59 unmodified lines
189};189};
190 190
191&ecspi3 {191&ecspi3 {
192 cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;192 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
193 pinctrl-names = "default";193 pinctrl-names = "default";
194 pinctrl-0 = <&pinctrl_ecspi3>;194 pinctrl-0 = <&pinctrl_ecspi3>;
195 status = "okay";195 status = "okay";
arch/arm/boot/dts/imx6qp.dtsi+1−1
@@ -110,5 +110,5 @@ · 109 unmodified lines
110};110};
111 111
112&pcie {112&pcie {
113 compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";113 compatible = "fsl,imx6qp-pcie";
114};114};
arch/arm/boot/dts/imx6sl-tolino-vision5.dts+349−0
@@ -0,0 +1,349 @@
1// SPDX-License-Identifier: (GPL-2.0)
2/*
3 * Device tree for the Tolino Vision 5 ebook reader
4 *
5 * Name on mainboard is: 37NB-E70K0M+6A3
6 * Serials start with: E70K02 (a number also seen in
7 * vendor kernel sources)
8 *
9 * This mainboard seems to be equipped with different SoCs.
10 * In the Tolino Vision 5 ebook reader it is a i.MX6SL
11 *
12 * Copyright 2021 Andreas Kemnade
13 * based on works
14 * Copyright 2016 Freescale Semiconductor, Inc.
15 */
16
17/dts-v1/;
18
19#include <dt-bindings/input/input.h>
20#include <dt-bindings/gpio/gpio.h>
21#include "imx6sl.dtsi"
22#include "e70k02.dtsi"
23
24/ {
25 model = "Tolino Vision 5";
26 compatible = "kobo,tolino-vision5", "fsl,imx6sl";
27};
28
29&gpio_keys {
30 pinctrl-names = "default";
31 pinctrl-0 = <&pinctrl_gpio_keys>;
32};
33
34&i2c1 {
35 pinctrl-names = "default","sleep";
36 pinctrl-0 = <&pinctrl_i2c1>;
37 pinctrl-1 = <&pinctrl_i2c1_sleep>;
38};
39
40&i2c2 {
41 pinctrl-names = "default","sleep";
42 pinctrl-0 = <&pinctrl_i2c2>;
43 pinctrl-1 = <&pinctrl_i2c2_sleep>;
44};
45
46&i2c3 {
47 pinctrl-names = "default";
48 pinctrl-0 = <&pinctrl_i2c3>;
49};
50
51&iomuxc {
52 pinctrl-names = "default";
53 pinctrl-0 = <&pinctrl_hog>;
54
55 pinctrl_gpio_keys: gpio-keysgrp {
56 fsl,pins = <
57 MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x17059 /* PWR_SW */
58 MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x17059 /* HALL_EN */
59 MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x17059 /* PAGE_UP */
60 MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x17059 /* PAGE_DOWN */
61 >;
62 };
63
64 pinctrl_hog: hoggrp {
65 fsl,pins = <
66 MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x79
67 MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x79
68 MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x79
69 MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x79
70 MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x79
71 MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x79
72 MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x79
73 MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x79
74 MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x79
75 MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x79
76 MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x79
77 MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x79
78 MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x79
79 MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x79
80 MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x79
81 MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x79
82 MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x79
83 MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x79
84 MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x79
85 MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x79
86 MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x79
87 MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x79
88 MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x79
89 MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x79
90 MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x79
91 MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x79
92 MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x79
93 MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x79
94 MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x79
95 MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79
96 MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79
97 >;
98 };
99
100 pinctrl_i2c1: i2c1grp {
101 fsl,pins = <
102 MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1
103 MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1
104 >;
105 };
106
107 pinctrl_i2c1_sleep: i2c1grp-sleep {
108 fsl,pins = <
109 MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1
110 MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1
111 >;
112 };
113
114 pinctrl_i2c2: i2c2grp {
115 fsl,pins = <
116 MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1
117 MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1
118 >;
119 };
120
121 pinctrl_i2c2_sleep: i2c2grp-sleep {
122 fsl,pins = <
123 MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1
124 MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1
125 >;
126 };
127
128 pinctrl_i2c3: i2c3grp {
129 fsl,pins = <
130 MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
131 MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
132 >;
133 };
134
135 pinctrl_led: ledgrp {
136 fsl,pins = <
137 MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x10059
138 >;
139 };
140
141 pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
142 fsl,pins = <
143 MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */
144 >;
145 };
146
147 pinctrl_ricoh_gpio: ricoh-gpiogrp {
148 fsl,pins = <
149 MX6SL_PAD_FEC_MDIO__GPIO4_IO20 0x1b8b1 /* ricoh619 chg */
150 MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b8b1 /* ricoh619 irq */
151 MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */
152 >;
153 };
154
155 pinctrl_uart1: uart1grp {
156 fsl,pins = <
157 MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
158 MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
159 >;
160 };
161
162 pinctrl_usbotg1: usbotg1grp {
163 fsl,pins = <
164 MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
165 >;
166 };
167
168 pinctrl_usdhc1: usdhc1grp {
169 fsl,pins = <
170 MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059
171 MX6SL_PAD_SD1_CLK__SD1_CLK 0x17059
172 MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059
173 MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059
174 MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059
175 MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059
176 MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059
177 MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059
178 MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059
179 MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059
180 >;
181 };
182
183 pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
184 fsl,pins = <
185 MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9
186 MX6SL_PAD_SD1_CLK__SD1_CLK 0x170b9
187 MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9
188 MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9
189 MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9
190 MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9
191 MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
192 MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
193 MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
194 MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
195 >;
196 };
197
198 pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
199 fsl,pins = <
200 MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9
201 MX6SL_PAD_SD1_CLK__SD1_CLK 0x170f9
202 MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
203 MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
204 MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
205 MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
206 MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
207 MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
208 MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
209 MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
210 >;
211 };
212
213 pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
214 fsl,pins = <
215 MX6SL_PAD_SD1_CMD__SD1_CMD 0x10059
216 MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059
217 MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x10059
218 MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x10059
219 MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x10059
220 MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x10059
221 MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x10059
222 MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x10059
223 MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x10059
224 MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x10059
225 >;
226 };
227
228 pinctrl_usdhc3: usdhc3grp {
229 fsl,pins = <
230 MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059
231 MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059
232 MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059
233 MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059
234 MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059
235 MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059
236 >;
237 };
238
239 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
240 fsl,pins = <
241 MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9
242 MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9
243 MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
244 MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
245 MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
246 MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
247 >;
248 };
249
250 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
251 fsl,pins = <
252 MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9
253 MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9
254 MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
255 MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
256 MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
257 MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
258 >;
259 };
260
261 pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
262 fsl,pins = <
263 MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1
264 MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1
265 MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1
266 MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1
267 MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1
268 MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1
269 >;
270 };
271
272 pinctrl_wifi_power: wifi-powergrp {
273 fsl,pins = <
274 MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */
275 >;
276 };
277
278 pinctrl_wifi_reset: wifi-resetgrp {
279 fsl,pins = <
280 MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */
281 >;
282 };
283};
284
285&leds {
286 pinctrl-names = "default";
287 pinctrl-0 = <&pinctrl_led>;
288};
289
290&lm3630a {
291 pinctrl-names = "default";
292 pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
293};
294
295&reg_wifi {
296 pinctrl-names = "default";
297 pinctrl-0 = <&pinctrl_wifi_power>;
298};
299
300&reg_vdd1p1 {
301 vin-supply = <&dcdc2_reg>;
302};
303
304&reg_vdd2p5 {
305 vin-supply = <&dcdc2_reg>;
306};
307
308&reg_arm {
309 vin-supply = <&dcdc3_reg>;
310};
311
312&reg_soc {
313 vin-supply = <&dcdc1_reg>;
314};
315
316&reg_pu {
317 vin-supply = <&dcdc1_reg>;
318};
319
320&ricoh619 {
321 pinctrl-names = "default";
322 pinctrl-0 = <&pinctrl_ricoh_gpio>;
323};
324
325&uart1 {
326 pinctrl-names = "default";
327 pinctrl-0 = <&pinctrl_uart1>;
328};
329
330&usdhc1 {
331 pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
332 pinctrl-0 = <&pinctrl_usdhc1>;
333 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
334 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
335 pinctrl-3 = <&pinctrl_usdhc1_sleep>;
336};
337
338&usdhc3 {
339 pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
340 pinctrl-0 = <&pinctrl_usdhc3>;
341 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
342 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
343 pinctrl-3 = <&pinctrl_usdhc3_sleep>;
344};
345
346&wifi_pwrseq {
347 pinctrl-names = "default";
348 pinctrl-0 = <&pinctrl_wifi_reset>;
349};
arch/arm/boot/dts/imx6sl.dtsi+8−10
@@ -55,18 +55,16 @@ · 54 unmodified lines
55 device_type = "cpu";55 device_type = "cpu";
56 reg = <0x0>;56 reg = <0x0>;
57 next-level-cache = <&L2>;57 next-level-cache = <&L2>;
58 operating-points = <58 operating-points =
59 /* kHz uV */59 /* kHz uV */
60 996000 127500060 <996000 1275000>,
61 792000 117500061 <792000 1175000>,
62 396000 97500062 <396000 975000>;
63 >;63 fsl,soc-operating-points =
64 fsl,soc-operating-points = <
65 /* ARM kHz SOC-PU uV */64 /* ARM kHz SOC-PU uV */
66 996000 122500065 <996000 1225000>,
67 792000 117500066 <792000 1175000>,
68 396000 117500067 <396000 1175000>;
69 >;
70 clock-latency = <61036>; /* two CLK32 periods */68 clock-latency = <61036>; /* two CLK32 periods */
71 #cooling-cells = <2>;69 #cooling-cells = <2>;
72 clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,70 clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
arch/arm/boot/dts/imx6sll-kobo-librah2o.dts+339−0
@@ -0,0 +1,339 @@
1// SPDX-License-Identifier: (GPL-2.0)
2/*
3 * Device tree for the Kobo Libra H2O ebook reader
4 *
5 * Name on mainboard is: 37NB-E70K0M+6A3
6 * Serials start with: E70K02 (a number also seen in
7 * vendor kernel sources)
8 *
9 * This mainboard seems to be equipped with different SoCs.
10 * In the Kobo Libra H2O ebook reader it is an i.MX6SLL
11 *
12 * Copyright 2021 Andreas Kemnade
13 * based on works
14 * Copyright 2016 Freescale Semiconductor, Inc.
15 */
16
17/dts-v1/;
18
19#include <dt-bindings/input/input.h>
20#include <dt-bindings/gpio/gpio.h>
21#include "imx6sll.dtsi"
22#include "e70k02.dtsi"
23
24/ {
25 model = "Kobo Libra H2O";
26 compatible = "kobo,librah2o", "fsl,imx6sll";
27};
28
29&clks {
30 assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
31 assigned-clock-rates = <393216000>;
32};
33
34&cpu0 {
35 arm-supply = <&dcdc3_reg>;
36 soc-supply = <&dcdc1_reg>;
37};
38
39&gpio_keys {
40 pinctrl-names = "default";
41 pinctrl-0 = <&pinctrl_gpio_keys>;
42};
43
44&i2c1 {
45 pinctrl-names = "default","sleep";
46 pinctrl-0 = <&pinctrl_i2c1>;
47 pinctrl-1 = <&pinctrl_i2c1_sleep>;
48};
49
50&i2c2 {
51 pinctrl-names = "default","sleep";
52 pinctrl-0 = <&pinctrl_i2c2>;
53 pinctrl-1 = <&pinctrl_i2c2_sleep>;
54};
55
56&i2c3 {
57 pinctrl-names = "default";
58 pinctrl-0 = <&pinctrl_i2c3>;
59};
60
61&iomuxc {
62 pinctrl-names = "default";
63 pinctrl-0 = <&pinctrl_hog>;
64
65 pinctrl_gpio_keys: gpio-keysgrp {
66 fsl,pins = <
67 MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x17059 /* PWR_SW */
68 MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23 0x17059 /* HALL_EN */
69 MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 /* PAGE_UP */
70 MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 /* PAGE_DOWN */
71 >;
72 };
73
74 pinctrl_hog: hoggrp {
75 fsl,pins = <
76 MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x79
77 MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x79
78 MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x79
79 MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x79
80 MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x79
81 MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x79
82 MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x79
83 MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x79
84 MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x79
85 MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x79
86 MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x79
87 MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x79
88 MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x79
89 MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x79
90 MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x79
91 MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x79
92 MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x79
93 MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x79
94 MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x79
95 MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x79
96 MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x79
97 MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x79
98 MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x79
99 MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x79
100 MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x79
101 MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x79
102 MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21 0x79
103 MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26 0x79
104 MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x79
105 MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x79
106 MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79
107 >;
108 };
109
110 pinctrl_i2c1: i2c1grp {
111 fsl,pins = <
112 MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1
113 MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1
114 >;
115 };
116
117 pinctrl_i2c1_sleep: i2c1grp-sleep {
118 fsl,pins = <
119 MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1
120 MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1
121 >;
122 };
123
124 pinctrl_i2c2: i2c2grp {
125 fsl,pins = <
126 MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1
127 MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1
128 >;
129 };
130
131 pinctrl_i2c2_sleep: i2c2grp-sleep {
132 fsl,pins = <
133 MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1
134 MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1
135 >;
136 };
137
138 pinctrl_i2c3: i2c3grp {
139 fsl,pins = <
140 MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
141 MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
142 >;
143 };
144
145 pinctrl_led: ledgrp {
146 fsl,pins = <
147 MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17 0x10059
148 >;
149 };
150
151 pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
152 fsl,pins = <
153 MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x10059 /* HWEN */
154 >;
155 };
156
157 pinctrl_ricoh_gpio: ricoh-gpiogrp {
158 fsl,pins = <
159 MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20 0x1b8b1 /* ricoh619 chg */
160 MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19 0x1b8b1 /* ricoh619 irq */
161 MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */
162 >;
163 };
164
165 pinctrl_uart1: uart1grp {
166 fsl,pins = <
167 MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
168 MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
169 >;
170 };
171
172 pinctrl_usbotg1: usbotg1grp {
173 fsl,pins = <
174 MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
175 >;
176 };
177
178 pinctrl_usdhc1: usdhc1grp {
179 fsl,pins = <
180 MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059
181 MX6SLL_PAD_SD1_CLK__SD1_CLK 0x17059
182 MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059
183 MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059
184 MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059
185 MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059
186 MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x17059
187 MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x17059
188 MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x17059
189 MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x17059
190 >;
191 };
192
193 pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
194 fsl,pins = <
195 MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9
196 MX6SLL_PAD_SD1_CLK__SD1_CLK 0x170b9
197 MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9
198 MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9
199 MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9
200 MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9
201 MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x170b9
202 MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x170b9
203 MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x170b9
204 MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x170b9
205 >;
206 };
207
208 pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
209 fsl,pins = <
210 MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9
211 MX6SLL_PAD_SD1_CLK__SD1_CLK 0x170f9
212 MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9
213 MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9
214 MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9
215 MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9
216 MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x170b9
217 MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x170b9
218 MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x170b9
219 MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x170b9
220 >;
221 };
222
223 pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
224 fsl,pins = <
225 MX6SLL_PAD_SD1_CMD__SD1_CMD 0x10059
226 MX6SLL_PAD_SD1_CLK__SD1_CLK 0x10059
227 MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x10059
228 MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x10059
229 MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x10059
230 MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x10059
231 MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x10059
232 MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x10059
233 MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x10059
234 MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x10059
235 >;
236 };
237
238 pinctrl_usdhc3: usdhc3grp {
239 fsl,pins = <
240 MX6SLL_PAD_SD3_CMD__SD3_CMD 0x11059
241 MX6SLL_PAD_SD3_CLK__SD3_CLK 0x11059
242 MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x11059
243 MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x11059
244 MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x11059
245 MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x11059
246 >;
247 };
248
249 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
250 fsl,pins = <
251 MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9
252 MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170b9
253 MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9
254 MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9
255 MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9
256 MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9
257 >;
258 };
259
260 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
261 fsl,pins = <
262 MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9
263 MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170f9
264 MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170f9
265 MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170f9
266 MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170f9
267 MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170f9
268 >;
269 };
270
271 pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
272 fsl,pins = <
273 MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x100c1
274 MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x100c1
275 MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x100c1
276 MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x100c1
277 MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x100c1
278 MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x100c1
279 >;
280 };
281
282 pinctrl_wifi_power: wifi-powergrp {
283 fsl,pins = <
284 MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */
285 >;
286 };
287
288 pinctrl_wifi_reset: wifi-resetgrp {
289 fsl,pins = <
290 MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x10059 /* WIFI_RST */
291 >;
292 };
293};
294
295&leds {
296 pinctrl-names = "default";
297 pinctrl-0 = <&pinctrl_led>;
298};
299
300&lm3630a {
301 pinctrl-names = "default";
302 pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
303};
304
305&reg_wifi {
306 pinctrl-names = "default";
307 pinctrl-0 = <&pinctrl_wifi_power>;
308};
309
310&ricoh619 {
311 pinctrl-names = "default";
312 pinctrl-0 = <&pinctrl_ricoh_gpio>;
313};
314
315&uart1 {
316 pinctrl-names = "default";
317 pinctrl-0 = <&pinctrl_uart1>;
318};
319
320&usdhc1 {
321 pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
322 pinctrl-0 = <&pinctrl_usdhc1>;
323 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
324 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
325 pinctrl-3 = <&pinctrl_usdhc1_sleep>;
326};
327
328&usdhc3 {
329 pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
330 pinctrl-0 = <&pinctrl_usdhc3>;
331 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
332 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
333 pinctrl-3 = <&pinctrl_usdhc3_sleep>;
334};
335
336&wifi_pwrseq {
337 pinctrl-names = "default";
338 pinctrl-0 = <&pinctrl_wifi_reset>;
339};
arch/arm/boot/dts/imx6sll.dtsi+10−12
@@ -51,20 +51,18 @@ · 50 unmodified lines
51 device_type = "cpu";51 device_type = "cpu";
52 reg = <0>;52 reg = <0>;
53 next-level-cache = <&L2>;53 next-level-cache = <&L2>;
54 operating-points = <54 operating-points =
55 /* kHz uV */55 /* kHz uV */
56 996000 127500056 <996000 1275000>,
57 792000 117500057 <792000 1175000>,
58 396000 107500058 <396000 1075000>,
59 198000 97500059 <198000 975000>;
60 >;60 fsl,soc-operating-points =
61 fsl,soc-operating-points = <
62 /* ARM kHz SOC-PU uV */61 /* ARM kHz SOC-PU uV */
63 996000 117500062 <996000 1175000>,
64 792000 117500063 <792000 1175000>,
65 396000 117500064 <396000 1175000>,
66 198000 117500065 <198000 1175000>;
67 >;
68 clock-latency = <61036>; /* two CLK32 periods */66 clock-latency = <61036>; /* two CLK32 periods */
69 #cooling-cells = <2>;67 #cooling-cells = <2>;
70 clocks = <&clks IMX6SLL_CLK_ARM>,68 clocks = <&clks IMX6SLL_CLK_ARM>,
arch/arm/boot/dts/imx6sx.dtsi+3−3
@@ -1395,15 +1395,15 @@ · 1394 unmodified lines
1395 };1395 };
1396 1396
1397 pcie: pcie@8ffc000 {1397 pcie: pcie@8ffc000 {
1398 compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";1398 compatible = "fsl,imx6sx-pcie";
1399 reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;1399 reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;
1400 reg-names = "dbi", "config";1400 reg-names = "dbi", "config";
1401 #address-cells = <3>;1401 #address-cells = <3>;
1402 #size-cells = <2>;1402 #size-cells = <2>;
1403 device_type = "pci";1403 device_type = "pci";
1404 bus-range = <0x00 0xff>;1404 bus-range = <0x00 0xff>;
1405 ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */1405 ranges = <0x81000000 0 0 0x08f80000 0 0x00010000>, /* downstream I/O */
1406 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */1406 <0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
1407 num-lanes = <1>;1407 num-lanes = <1>;
1408 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;1408 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
1409 interrupt-names = "msi";1409 interrupt-names = "msi";
arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi+11−1
@@ -68,8 +68,11 @@ · 67 unmodified lines
68};68};
69 69
70&i2c1 {70&i2c1 {
71 pinctrl-names = "default";71 pinctrl-names = "default", "gpio";
72 pinctrl-0 = <&pinctrl_i2c1>;72 pinctrl-0 = <&pinctrl_i2c1>;
73 pinctrl-1 = <&pinctrl_i2c1_gpio>;
74 scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
75 sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
73 clock-frequency = <100000>;76 clock-frequency = <100000>;
74 status = "okay";77 status = "okay";
75 78
@@ -147,6 +150,13 @@ · 71 unmodified lines
147 >;150 >;
148 };151 };
149 152
153 pinctrl_i2c1_gpio: i2cgpiogrp {
154 fsl,pins = <
155 MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0
156 MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0
157 >;
158 };
159
150 pinctrl_uart1: uart1grp {160 pinctrl_uart1: uart1grp {
151 fsl,pins = <161 fsl,pins = <
152 MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1162 MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
arch/arm/boot/dts/imx6ul-phytec-segin.dtsi+1−0
@@ -191,6 +191,7 @@ · 190 unmodified lines
191 no-1-8-v;191 no-1-8-v;
192 keep-power-in-suspend;192 keep-power-in-suspend;
193 wakeup-source;193 wakeup-source;
194 disable-wp;
194 status = "disabled";195 status = "disabled";
195};196};
196 197
arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts+17−0
@@ -0,0 +1,17 @@
1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2/*
3 * Copyright 2021 Toradex
4 */
5
6/dts-v1/;
7
8#include "imx6ull-colibri-emmc-nonwifi.dtsi"
9#include "imx6ull-colibri-eval-v3.dtsi"
10
11/ {
12 model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Evaluation Board V3";
13 compatible = "toradex,colibri-imx6ull-emmc-eval",
14 "toradex,colibri-imx6ull-emmc",
15 "toradex,colibri-imx6ull",
16 "fsl,imx6ull";
17};
arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi+185−0
@@ -0,0 +1,185 @@
1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2/*
3 * Copyright 2021 Toradex
4 */
5
6#include "imx6ull-colibri.dtsi"
7
8/ {
9 aliases {
10 mmc0 = &usdhc2; /* eMMC */
11 mmc1 = &usdhc1; /* MMC 4bit slot */
12 };
13
14 memory@80000000 {
15 device_type = "memory";
16 reg = <0x80000000 0x10000000>;
17 };
18};
19
20&gpio1 {
21 gpio-line-names = "SODIMM_8",
22 "SODIMM_6",
23 "SODIMM_129",
24 "SODIMM_89",
25 "SODIMM_19",
26 "SODIMM_21",
27 "UNUSABLE_SODIMM_180",
28 "UNUSABLE_SODIMM_184",
29 "SODIMM_4",
30 "SODIMM_2",
31 "SODIMM_106",
32 "SODIMM_71",
33 "SODIMM_23",
34 "SODIMM_31",
35 "SODIMM_99",
36 "SODIMM_102",
37 "SODIMM_33",
38 "SODIMM_35",
39 "SODIMM_25",
40 "SODIMM_27",
41 "SODIMM_36",
42 "SODIMM_38",
43 "SODIMM_32",
44 "SODIMM_34",
45 "SODIMM_135",
46 "SODIMM_77",
47 "SODIMM_100",
48 "SODIMM_186",
49 "SODIMM_196",
50 "SODIMM_194";
51};
52
53&gpio2 {
54 gpio-line-names = "SODIMM_55",
55 "SODIMM_63",
56 "SODIMM_178",
57 "SODIMM_188",
58 "SODIMM_73",
59 "SODIMM_30",
60 "SODIMM_67",
61 "SODIMM_104",
62 "",
63 "",
64 "",
65 "",
66 "",
67 "",
68 "",
69 "",
70 "SODIMM_190",
71 "SODIMM_47",
72 "SODIMM_192",
73 "SODIMM_49",
74 "SODIMM_51",
75 "SODIMM_53";
76};
77
78&gpio3 {
79 gpio-line-names = "SODIMM_56",
80 "SODIMM_44",
81 "SODIMM_68",
82 "SODIMM_82",
83 "",
84 "SODIMM_76",
85 "SODIMM_70",
86 "SODIMM_60",
87 "SODIMM_58",
88 "SODIMM_78",
89 "SODIMM_72",
90 "SODIMM_80",
91 "SODIMM_46",
92 "SODIMM_62",
93 "SODIMM_48",
94 "SODIMM_74",
95 "SODIMM_50",
96 "SODIMM_52",
97 "SODIMM_54",
98 "SODIMM_66",
99 "SODIMM_64",
100 "SODIMM_57",
101 "SODIMM_61",
102 "SODIMM_29",
103 "SODIMM_37",
104 "SODIMM_88",
105 "SODIMM_86",
106 "SODIMM_92",
107 "SODIMM_90";
108};
109
110&gpio4 {
111 gpio-line-names = "",
112 "",
113 "",
114 "",
115 "",
116 "",
117 "",
118 "",
119 "",
120 "",
121 "SODIMM_140",
122 "SODIMM_59",
123 "SODIMM_142",
124 "SODIMM_144",
125 "SODIMM_133",
126 "SODIMM_146",
127 "SODIMM_28",
128 "SODIMM_75",
129 "SODIMM_96",
130 "SODIMM_81",
131 "SODIMM_94",
132 "SODIMM_101",
133 "SODIMM_103",
134 "SODIMM_79",
135 "SODIMM_97",
136 "SODIMM_69",
137 "SODIMM_98",
138 "SODIMM_85",
139 "SODIMM_65";
140};
141
142&gpio5 {
143 gpio-line-names = "SODIMM_43",
144 "SODIMM_45",
145 "SODIMM_137",
146 "SODIMM_95",
147 "SODIMM_107",
148 "SODIMM_131",
149 "SODIMM_93",
150 "",
151 "SODIMM_138",
152 "",
153 "SODIMM_105",
154 "SODIMM_127";
155};
156
157&gpmi {
158 status = "disabled";
159};
160
161&iomuxc {
162 pinctrl-names = "default";
163 pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
164 &pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7
165 &pinctrl_gpmi_gpio>;
166};
167
168&iomuxc_snvs {
169 pinctrl-names = "default";
170 pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
171};
172
173&usdhc2 {
174 pinctrl-names = "default";
175 pinctrl-0 = <&pinctrl_usdhc2emmc>;
176 assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
177 assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
178 assigned-clock-rates = <0>, <198000000>;
179 bus-width = <8>;
180 keep-power-in-suspend;
181 no-1-8-v;
182 non-removable;
183 vmmc-supply = <&reg_module_3v3>;
184 status = "okay";
185};
arch/arm/boot/dts/imx6ull-colibri.dtsi+30−2
@@ -1,6 +1,6 @@
1// SPDX-License-Identifier: (GPL-2.0 OR MIT)1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2/*2/*
3 * Copyright 2018 Toradex AG3 * Copyright 2018-2021 Toradex
4 */4 */
5 5
6#include "imx6ull.dtsi"6#include "imx6ull.dtsi"
@@ -345,6 +345,19 @@ · 338 unmodified lines
345 >;345 >;
346 };346 };
347 347
348 /*
349 * With an eMMC instead of a raw NAND device the following pins
350 * are available at SODIMM pins
351 */
352 pinctrl_gpmi_gpio: gpmi-gpio-grp {
353 fsl,pins = <
354 MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x10b0 /* SODIMM 140 */
355 MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x10b0 /* SODIMM 144 */
356 MX6UL_PAD_NAND_CLE__GPIO4_IO15 0x10b0 /* SODIMM 146 */
357 MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x10b0 /* SODIMM 142 */
358 >;
359 };
360
348 pinctrl_gpmi_nand: gpmi-nand-grp {361 pinctrl_gpmi_nand: gpmi-nand-grp {
349 fsl,pins = <362 fsl,pins = <
350 MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9363 MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9
@@ -533,6 +546,21 @@ · 182 unmodified lines
533 >;546 >;
534 };547 };
535 548
549 pinctrl_usdhc2emmc: usdhc2emmcgrp {
550 fsl,pins = <
551 MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059
552 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
553 MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
554 MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
555 MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
556 MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
557 MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
558 MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
559 MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
560 MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
561 >;
562 };
563
536 pinctrl_wdog: wdog-grp {564 pinctrl_wdog: wdog-grp {
537 fsl,pins = <565 fsl,pins = <
538 MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0566 MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
arch/arm/boot/dts/imx7-mba7.dtsi+40−2
@@ -1,8 +1,8 @@
1// SPDX-License-Identifier: GPL-2.0 OR X111// SPDX-License-Identifier: GPL-2.0 OR X11
2/*2/*
3 * Device Tree Include file for TQ Systems MBa7 carrier board.3 * Device Tree Include file for TQ-Systems MBa7 carrier board.
4 *4 *
5 * Copyright (C) 2016 TQ Systems GmbH5 * Copyright (C) 2016 TQ-Systems GmbH
6 * Author: Markus Niebel <Markus.Niebel@tq-group.com>6 * Author: Markus Niebel <Markus.Niebel@tq-group.com>
7 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>7 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
8 *8 *
@@ -236,6 +236,44 @@ · 227 unmodified lines
236 };236 };
237};237};
238 238
239&flash0 {
240 partitions {
241 compatible = "fixed-partitions";
242 #address-cells = <1>;
243 #size-cells = <1>;
244
245 uboot@0 {
246 label = "U-Boot";
247 reg = <0x0 0xd0000>;
248 };
249
250 env1@d0000 {
251 label = "ENV1";
252 reg = <0xd0000 0x10000>;
253 };
254
255 env2@e0000 {
256 label = "ENV2";
257 reg = <0xe0000 0x10000>;
258 };
259
260 dtb@f0000 {
261 label = "DTB";
262 reg = <0xf0000 0x10000>;
263 };
264
265 linux@100000 {
266 label = "Linux";
267 reg = <0x100000 0x700000>;
268 };
269
270 rootfs@800000 {
271 label = "RootFS";
272 reg = <0x800000 0x3800000>;
273 };
274 };
275};
276
239&flexcan1 {277&flexcan1 {
240 pinctrl-names = "default";278 pinctrl-names = "default";
241 pinctrl-0 = <&pinctrl_flexcan1>;279 pinctrl-0 = <&pinctrl_flexcan1>;
arch/arm/boot/dts/imx7-tqma7.dtsi+45−2
@@ -1,8 +1,8 @@
1// SPDX-License-Identifier: GPL-2.0 OR X111// SPDX-License-Identifier: GPL-2.0 OR X11
2/*2/*
3 * Device Tree Include file for TQ Systems TQMa7x boards with full mounted PCB.3 * Device Tree Include file for TQ-Systems TQMa7x boards with full mounted PCB.
4 *4 *
5 * Copyright (C) 2016 TQ Systems GmbH5 * Copyright (C) 2016 TQ-Systems GmbH
6 * Author: Markus Niebel <Markus.Niebel@tq-group.com>6 * Author: Markus Niebel <Markus.Niebel@tq-group.com>
7 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>7 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
8 */8 */
@@ -19,6 +19,16 @@ · 10 unmodified lines
19 cpu-supply = <&sw1a_reg>;19 cpu-supply = <&sw1a_reg>;
20};20};
21 21
22&gpio2 {
23 /* Configured as pullup by QSPI pin group */
24 qspi-reset-hog {
25 gpio-hog;
26 gpios = <4 GPIO_ACTIVE_LOW>;
27 input;
28 line-name = "qspi-reset";
29 };
30};
31
22&i2c1 {32&i2c1 {
23 pinctrl-names = "default";33 pinctrl-names = "default";
24 pinctrl-0 = <&pinctrl_i2c1>;34 pinctrl-0 = <&pinctrl_i2c1>;
@@ -160,6 +170,25 @@ · 135 unmodified lines
160 >;170 >;
161 };171 };
162 172
173 pinctrl_qspi: qspigrp {
174 fsl,pins = <
175 MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x5A
176 MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x5A
177 MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x5A
178 MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x5A
179 MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x11
180 MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x54
181 MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B 0x54
182 >;
183 };
184
185 pinctrl_qspi_reset: qspi_resetgrp {
186 fsl,pins = <
187 /* #QSPI_RESET */
188 MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x52
189 >;
190 };
191
163 pinctrl_usdhc3: usdhc3grp {192 pinctrl_usdhc3: usdhc3grp {
164 fsl,pins = <193 fsl,pins = <
165 MX7D_PAD_SD3_CMD__SD3_CMD 0x59194 MX7D_PAD_SD3_CMD__SD3_CMD 0x59
@@ -217,6 +246,20 @@ · 51 unmodified lines
217 };246 };
218};247};
219 248
249&qspi {
250 pinctrl-names = "default";
251 pinctrl-0 = <&pinctrl_qspi &pinctrl_qspi_reset>;
252 status = "okay";
253
254 flash0: flash@0 {
255 compatible = "jedec,spi-nor";
256 reg = <0>;
257 spi-max-frequency = <29000000>;
258 spi-rx-bus-width = <4>;
259 spi-tx-bus-width = <4>;
260 };
261};
262
220&sdma {263&sdma {
221 status = "okay";264 status = "okay";
222};265};
arch/arm/boot/dts/imx7d-mba7.dts+3−3
@@ -1,8 +1,8 @@
1// SPDX-License-Identifier: GPL-2.0 OR X111// SPDX-License-Identifier: GPL-2.0 OR X11
2/*2/*
3 * Device Tree Source for TQ Systems TQMa7D board on MBa7 carrier board.3 * Device Tree Source for TQ-Systems TQMa7D board on MBa7 carrier board.
4 *4 *
5 * Copyright (C) 2016 TQ Systems GmbH5 * Copyright (C) 2016 TQ-Systems GmbH
6 * Author: Markus Niebel <Markus.Niebel@tq-group.com>6 * Author: Markus Niebel <Markus.Niebel@tq-group.com>
7 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>7 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
8 */8 */
@@ -13,7 +13,7 @@ · 4 unmodified lines
13#include "imx7-mba7.dtsi"13#include "imx7-mba7.dtsi"
14 14
15/ {15/ {
16 model = "TQ Systems TQMa7D board on MBa7 carrier board";16 model = "TQ-Systems TQMa7D board on MBa7 carrier board";
17 compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d";17 compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d";
18};18};
19 19
arch/arm/boot/dts/imx7d-sdb.dts+1−1
@@ -45,7 +45,7 @@ · 44 unmodified lines
45 pinctrl-0 = <&pinctrl_spi4>;45 pinctrl-0 = <&pinctrl_spi4>;
46 gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;46 gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
47 gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;47 gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
48 cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;48 cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
49 num-chipselects = <1>;49 num-chipselects = <1>;
50 #address-cells = <1>;50 #address-cells = <1>;
51 #size-cells = <0>;51 #size-cells = <0>;
arch/arm/boot/dts/imx7d-tqma7.dtsi+2−2
@@ -1,8 +1,8 @@
1// SPDX-License-Identifier: GPL-2.0 OR X111// SPDX-License-Identifier: GPL-2.0 OR X11
2/*2/*
3 * Device Tree Include file for TQ Systems TQMa7D board with NXP i.MX7Dual SoC.3 * Device Tree Include file for TQ-Systems TQMa7D board with NXP i.MX7Dual SoC.
4 *4 *
5 * Copyright (C) 2016 TQ Systems GmbH5 * Copyright (C) 2016 TQ-Systems GmbH
6 * Author: Markus Niebel <Markus.Niebel@tq-group.com>6 * Author: Markus Niebel <Markus.Niebel@tq-group.com>
7 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>7 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
8 */8 */
arch/arm/boot/dts/imx7d.dtsi+3−4
@@ -164,7 +164,7 @@ · 163 unmodified lines
164 };164 };
165 165
166 pcie: pcie@33800000 {166 pcie: pcie@33800000 {
167 compatible = "fsl,imx7d-pcie", "snps,dw-pcie";167 compatible = "fsl,imx7d-pcie";
168 reg = <0x33800000 0x4000>,168 reg = <0x33800000 0x4000>,
169 <0x4ff00000 0x80000>;169 <0x4ff00000 0x80000>;
170 reg-names = "dbi", "config";170 reg-names = "dbi", "config";
@@ -172,10 +172,9 @@ · 1 unmodified line
172 #size-cells = <2>;172 #size-cells = <2>;
173 device_type = "pci";173 device_type = "pci";
174 bus-range = <0x00 0xff>;174 bus-range = <0x00 0xff>;
175 ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O */175 ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000>, /* downstream I/O */
176 0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */176 <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
177 num-lanes = <1>;177 num-lanes = <1>;
178 num-viewport = <4>;
179 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;178 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
180 interrupt-names = "msi";179 interrupt-names = "msi";
181 #interrupt-cells = <1>;180 #interrupt-cells = <1>;
arch/arm/boot/dts/imx7s-mba7.dts+3−3
@@ -1,8 +1,8 @@
1// SPDX-License-Identifier: GPL-2.0 OR X111// SPDX-License-Identifier: GPL-2.0 OR X11
2/*2/*
3 * Device Tree Source for TQ Systems TQMa7S board on MBa7 carrier board.3 * Device Tree Source for TQ-Systems TQMa7S board on MBa7 carrier board.
4 *4 *
5 * Copyright (C) 2016 TQ Systems GmbH5 * Copyright (C) 2016 TQ-Systems GmbH
6 * Author: Markus Niebel <Markus.Niebel@tq-group.com>6 * Author: Markus Niebel <Markus.Niebel@tq-group.com>
7 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>7 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
8 */8 */
@@ -13,6 +13,6 @@ · 4 unmodified lines
13#include "imx7-mba7.dtsi"13#include "imx7-mba7.dtsi"
14 14
15/ {15/ {
16 model = "TQ Systems TQMa7S board on MBa7 carrier board";16 model = "TQ-Systems TQMa7S board on MBa7 carrier board";
17 compatible = "tq,imx7s-mba7", "tq,imx7s-tqma7", "fsl,imx7s";17 compatible = "tq,imx7s-mba7", "tq,imx7s-tqma7", "fsl,imx7s";
18};18};
arch/arm/boot/dts/imx7s-tqma7.dtsi+2−2
@@ -1,8 +1,8 @@
1// SPDX-License-Identifier: GPL-2.0 OR X111// SPDX-License-Identifier: GPL-2.0 OR X11
2/*2/*
3 * Device Tree Include file for TQ Systems TQMa7S board with NXP i.MX7Solo SoC.3 * Device Tree Include file for TQ-Systems TQMa7S board with NXP i.MX7Solo SoC.
4 *4 *
5 * Copyright (C) 2016 TQ Systems GmbH5 * Copyright (C) 2016 TQ-Systems GmbH
6 * Author: Markus Niebel <Markus.Niebel@tq-group.com>6 * Author: Markus Niebel <Markus.Niebel@tq-group.com>
7 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>7 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
8 */8 */
arch/arm/boot/dts/integrator.dtsi+17−6
@@ -15,10 +15,14 @@ · 14 unmodified lines
15 core-module@10000000 {15 core-module@10000000 {
16 compatible = "arm,core-module-integrator", "syscon", "simple-mfd";16 compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
17 reg = <0x10000000 0x200>;17 reg = <0x10000000 0x200>;
18 ranges = <0x0 0x10000000 0x200>;
19 #address-cells = <1>;
20 #size-cells = <1>;
18 21
19 /* Use core module LED to indicate CPU load */22 /* Use core module LED to indicate CPU load */
20 led@c.0 {23 led@c,0 {
21 compatible = "register-bit-led";24 compatible = "register-bit-led";
25 reg = <0x0c 0x04>;
22 offset = <0x0c>;26 offset = <0x0c>;
23 mask = <0x01>;27 mask = <0x01>;
24 label = "integrator:core_module";28 label = "integrator:core_module";
@@ -104,35 +108,42 @@ · 79 unmodified lines
104 interrupts = <4>;108 interrupts = <4>;
105 };109 };
106 110
107 syscon {111 syscon@1a000000 {
108 /* Debug registers mapped as syscon */112 /* Debug registers mapped as syscon */
109 compatible = "syscon", "simple-mfd";113 compatible = "syscon", "simple-mfd";
110 reg = <0x1a000000 0x10>;114 reg = <0x1a000000 0x10>;
115 ranges = <0x0 0x1a000000 0x10>;
116 #address-cells = <1>;
117 #size-cells = <1>;
111 118
112 led@4.0 {119 led@4,0 {
113 compatible = "register-bit-led";120 compatible = "register-bit-led";
121 reg = <0x04 0x04>;
114 offset = <0x04>;122 offset = <0x04>;
115 mask = <0x01>;123 mask = <0x01>;
116 label = "integrator:green0";124 label = "integrator:green0";
117 linux,default-trigger = "heartbeat";125 linux,default-trigger = "heartbeat";
118 default-state = "on";126 default-state = "on";
119 };127 };
120 led@4.1 {128 led@4,1 {
121 compatible = "register-bit-led";129 compatible = "register-bit-led";
130 reg = <0x04 0x04>;
122 offset = <0x04>;131 offset = <0x04>;
123 mask = <0x02>;132 mask = <0x02>;
124 label = "integrator:yellow";133 label = "integrator:yellow";
125 default-state = "off";134 default-state = "off";
126 };135 };
127 led@4.2 {136 led@4,2 {
128 compatible = "register-bit-led";137 compatible = "register-bit-led";
138 reg = <0x04 0x04>;
129 offset = <0x04>;139 offset = <0x04>;
130 mask = <0x04>;140 mask = <0x04>;
131 label = "integrator:red";141 label = "integrator:red";
132 default-state = "off";142 default-state = "off";
133 };143 };
134 led@4.3 {144 led@4,3 {
135 compatible = "register-bit-led";145 compatible = "register-bit-led";
146 reg = <0x04 0x04>;
136 offset = <0x04>;147 offset = <0x04>;
137 mask = <0x08>;148 mask = <0x08>;
138 label = "integrator:green1";149 label = "integrator:green1";
arch/arm/boot/dts/integratorap-im-pd1.dts+7−2
@@ -28,9 +28,13 @@ · 27 unmodified lines
28 syscon@0 {28 syscon@0 {
29 compatible = "arm,im-pd1-syscon", "syscon";29 compatible = "arm,im-pd1-syscon", "syscon";
30 reg = <0x00000000 0x1000>;30 reg = <0x00000000 0x1000>;
31 ranges;
32 #address-cells = <1>;
33 #size-cells = <1>;
31 34
32 vco1: vco1-clock {35 vco1: clock-controller@0 {
33 compatible = "arm,impd1-vco1";36 compatible = "arm,impd1-vco1";
37 reg = <0x00 0x04>;
34 #clock-cells = <0>;38 #clock-cells = <0>;
35 lock-offset = <0x08>;39 lock-offset = <0x08>;
36 vco-offset = <0x00>;40 vco-offset = <0x00>;
@@ -38,8 +42,9 @@ · 1 unmodified line
38 clock-output-names = "IM-PD1-VCO1";42 clock-output-names = "IM-PD1-VCO1";
39 };43 };
40 44
41 vco2: vco2-clock {45 vco2: clock-controller@4 {
42 compatible = "arm,impd1-vco2";46 compatible = "arm,impd1-vco2";
47 reg = <0x04 0x04>;
43 #clock-cells = <0>;48 #clock-cells = <0>;
44 lock-offset = <0x08>;49 lock-offset = <0x08>;
45 vco-offset = <0x04>;50 vco-offset = <0x04>;
arch/arm/boot/dts/integratorap.dts+11−4
@@ -88,8 +88,9 @@ · 87 unmodified lines
88 };88 };
89 89
90 /* Oscillator on the core module, clocks the CPU core */90 /* Oscillator on the core module, clocks the CPU core */
91 cmosc: cmosc@24M {91 cmosc: clock-controller@8 {
92 compatible = "arm,syscon-icst525-integratorap-cm";92 compatible = "arm,syscon-icst525-integratorap-cm";
93 reg = <0x08 0x04>;
93 #clock-cells = <0>;94 #clock-cells = <0>;
94 lock-offset = <0x14>;95 lock-offset = <0x14>;
95 vco-offset = <0x08>;96 vco-offset = <0x08>;
@@ -97,8 +98,9 @@ · 1 unmodified line
97 };98 };
98 99
99 /* Auxilary oscillator on the core module, 32.369MHz at boot */100 /* Auxilary oscillator on the core module, 32.369MHz at boot */
100 auxosc: auxosc@24M {101 auxosc: clock-controller@1c {
101 compatible = "arm,syscon-icst525";102 compatible = "arm,syscon-icst525";
103 reg = <0x1c 0x04>;
102 #clock-cells = <0>;104 #clock-cells = <0>;
103 lock-offset = <0x14>;105 lock-offset = <0x14>;
104 vco-offset = <0x1c>;106 vco-offset = <0x1c>;
@@ -109,13 +111,17 @@ · 4 unmodified lines
109 syscon {111 syscon {
110 compatible = "arm,integrator-ap-syscon", "syscon";112 compatible = "arm,integrator-ap-syscon", "syscon";
111 reg = <0x11000000 0x100>;113 reg = <0x11000000 0x100>;
114 ranges = <0x0 0x11000000 0x100>;
115 #size-cells = <1>;
116 #address-cells = <1>;
112 117
113 /*118 /*
114 * SYSCLK clocks PCIv3 bridge, system controller and the119 * SYSCLK clocks PCIv3 bridge, system controller and the
115 * logic modules.120 * logic modules.
116 */121 */
117 sysclk: apsys@24M {122 sysclk: clock-controller@4 {
118 compatible = "arm,syscon-icst525-integratorap-sys";123 compatible = "arm,syscon-icst525-integratorap-sys";
124 reg = <0x04 0x04>;
119 #clock-cells = <0>;125 #clock-cells = <0>;
120 lock-offset = <0x1c>;126 lock-offset = <0x1c>;
121 vco-offset = <0x04>;127 vco-offset = <0x04>;
@@ -123,8 +129,9 @@ · 1 unmodified line
123 };129 };
124 130
125 /* One-bit control for the PCI bus clock (33 or 25 MHz) */131 /* One-bit control for the PCI bus clock (33 or 25 MHz) */
126 pciclk: pciclk@24M {132 pciclk: clock-controller@4,8 {
127 compatible = "arm,syscon-icst525-integratorap-pci";133 compatible = "arm,syscon-icst525-integratorap-pci";
134 reg = <0x04 0x04>;
128 #clock-cells = <0>;135 #clock-cells = <0>;
129 lock-offset = <0x1c>;136 lock-offset = <0x1c>;
130 vco-offset = <0x04>;137 vco-offset = <0x04>;
arch/arm/boot/dts/integratorcp.dts+6−3
@@ -92,8 +92,9 @@ · 91 unmodified lines
92 };92 };
93 93
94 /* Oscillator on the core module, clocks the CPU core */94 /* Oscillator on the core module, clocks the CPU core */
95 cmcore: cmosc@24M {95 cmcore: clock-controller@8 {
96 compatible = "arm,syscon-icst525-integratorcp-cm-core";96 compatible = "arm,syscon-icst525-integratorcp-cm-core";
97 reg = <0x08 0x04>;
97 #clock-cells = <0>;98 #clock-cells = <0>;
98 lock-offset = <0x14>;99 lock-offset = <0x14>;
99 vco-offset = <0x08>;100 vco-offset = <0x08>;
@@ -101,8 +102,9 @@ · 1 unmodified line
101 };102 };
102 103
103 /* Oscillator on the core module, clocks the memory bus */104 /* Oscillator on the core module, clocks the memory bus */
104 cmmem: cmosc@24M {105 cmmem: clock-controller@8,12 {
105 compatible = "arm,syscon-icst525-integratorcp-cm-mem";106 compatible = "arm,syscon-icst525-integratorcp-cm-mem";
107 reg = <0x08 0x04>;
106 #clock-cells = <0>;108 #clock-cells = <0>;
107 lock-offset = <0x14>;109 lock-offset = <0x14>;
108 vco-offset = <0x08>;110 vco-offset = <0x08>;
@@ -110,8 +112,9 @@ · 1 unmodified line
110 };112 };
111 113
112 /* Auxilary oscillator on the core module, clocks the CLCD */114 /* Auxilary oscillator on the core module, clocks the CLCD */
113 auxosc: auxosc@24M {115 auxosc: clock-controller@1c {
114 compatible = "arm,syscon-icst525";116 compatible = "arm,syscon-icst525";
117 reg = <0x1c 0x04>;
115 #clock-cells = <0>;118 #clock-cells = <0>;
116 lock-offset = <0x14>;119 lock-offset = <0x14>;
117 vco-offset = <0x1c>;120 vco-offset = <0x1c>;
arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts+2−0
@@ -63,6 +63,8 @@ · 62 unmodified lines
63 * We have slots (IDSEL) 1 and 2 with one assigned IRQ63 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
64 * each handling all IRQs.64 * each handling all IRQs.
65 */65 */
66 #interrupt-cells = <1>;
67 interrupt-map-mask = <0xf800 0 0 7>;
66 interrupt-map =68 interrupt-map =
67 /* IDSEL 1 */69 /* IDSEL 1 */
68 <0x0800 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 6 */70 <0x0800 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 6 */
arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts+2−0
@@ -120,6 +120,8 @@ · 119 unmodified lines
120 * We have 2 slots (IDSEL) 1 and 2 with one dedicated interrupt120 * We have 2 slots (IDSEL) 1 and 2 with one dedicated interrupt
121 * per slot. This interrupt is shared (OR:ed) by all four pins.121 * per slot. This interrupt is shared (OR:ed) by all four pins.
122 */122 */
123 #interrupt-cells = <1>;
124 interrupt-map-mask = <0xf800 0 0 7>;
123 interrupt-map =125 interrupt-map =
124 /* IDSEL 1 */126 /* IDSEL 1 */
125 <0x0800 0 0 1 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 2 */127 <0x0800 0 0 1 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 2 */
arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts+2−0
@@ -129,6 +129,8 @@ · 128 unmodified lines
129 * We have slots (IDSEL) 1, 2, 3, 4 and pins 1, 2 and 3.129 * We have slots (IDSEL) 1, 2, 3, 4 and pins 1, 2 and 3.
130 * Only slot 3 have three IRQs.130 * Only slot 3 have three IRQs.
131 */131 */
132 #interrupt-cells = <1>;
133 interrupt-map-mask = <0xf800 0 0 7>;
132 interrupt-map =134 interrupt-map =
133 /* IDSEL 1 */135 /* IDSEL 1 */
134 <0x0800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT E on slot 1 is irq 7 */136 <0x0800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT E on slot 1 is irq 7 */
arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts+2−0
@@ -106,6 +106,8 @@ · 105 unmodified lines
106 * Written based on the FSG-3 PCI boardfile.106 * Written based on the FSG-3 PCI boardfile.
107 * We have slots 12, 13 & 14 (IDSEL) with one IRQ each.107 * We have slots 12, 13 & 14 (IDSEL) with one IRQ each.
108 */108 */
109 #interrupt-cells = <1>;
110 interrupt-map-mask = <0xf800 0 0 7>;
109 interrupt-map =111 interrupt-map =
110 /* IDSEL 12 */112 /* IDSEL 12 */
111 <0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */113 <0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts+2−0
@@ -115,6 +115,8 @@ · 114 unmodified lines
115 *115 *
116 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.116 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
117 */117 */
118 #interrupt-cells = <1>;
119 interrupt-map-mask = <0xf800 0 0 7>;
118 interrupt-map =120 interrupt-map =
119 /* IDSEL 1 */121 /* IDSEL 1 */
120 <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */122 <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts+2−0
@@ -115,6 +115,8 @@ · 114 unmodified lines
115 * Taken from NAS 100D PCI boardfile (nas100d-pci.c)115 * Taken from NAS 100D PCI boardfile (nas100d-pci.c)
116 * We have slots (IDSEL) 1, 2 and 3 and pins 1, 2 and 3.116 * We have slots (IDSEL) 1, 2 and 3 and pins 1, 2 and 3.
117 */117 */
118 #interrupt-cells = <1>;
119 interrupt-map-mask = <0xf800 0 0 7>;
118 interrupt-map =120 interrupt-map =
119 /* IDSEL 1 */121 /* IDSEL 1 */
120 <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */122 <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts+2−0
@@ -68,6 +68,8 @@ · 67 unmodified lines
68 * We have slots (IDSEL) 12, 13 and 14 with one assigned IRQ68 * We have slots (IDSEL) 12, 13 and 14 with one assigned IRQ
69 * for 12 & 13 and one for 14.69 * for 12 & 13 and one for 14.
70 */70 */
71 #interrupt-cells = <1>;
72 interrupt-map-mask = <0xf800 0 0 7>;
71 interrupt-map =73 interrupt-map =
72 /* IDSEL 12 */74 /* IDSEL 12 */
73 <0x6000 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 7 */75 <0x6000 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 7 */
arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts+2−0
@@ -122,6 +122,8 @@ · 121 unmodified lines
122 * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant122 * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant
123 * We have slots (IDSEL) 1, 2 and 3.123 * We have slots (IDSEL) 1, 2 and 3.
124 */124 */
125 #interrupt-cells = <1>;
126 interrupt-map-mask = <0xf800 0 0 7>;
125 interrupt-map =127 interrupt-map =
126 /* IDSEL 1 */128 /* IDSEL 1 */
127 <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */129 <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts+2−0
@@ -123,6 +123,8 @@ · 122 unmodified lines
123 * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.123 * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
124 * Derived from the GTWX5715 PCI boardfile.124 * Derived from the GTWX5715 PCI boardfile.
125 */125 */
126 #interrupt-cells = <1>;
127 interrupt-map-mask = <0xf800 0 0 7>;
126 interrupt-map =128 interrupt-map =
127 /* IDSEL 0 */129 /* IDSEL 0 */
128 <0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */130 <0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */
arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts+2−0
@@ -62,6 +62,8 @@ · 61 unmodified lines
62 * We have slots (IDSEL) 1 and 2 with one assigned IRQ62 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
63 * each handling all IRQs.63 * each handling all IRQs.
64 */64 */
65 #interrupt-cells = <1>;
66 interrupt-map-mask = <0xf800 0 0 7>;
65 interrupt-map =67 interrupt-map =
66 /* IDSEL 1 */68 /* IDSEL 1 */
67 <0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */69 <0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */
arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts+2−0
@@ -131,6 +131,8 @@ · 130 unmodified lines
131 * have instead assumed that they are rotated (swizzled) like131 * have instead assumed that they are rotated (swizzled) like
132 * this with 11, 10, 9, 8 for the 4 pins on IDSEL 1 etc.132 * this with 11, 10, 9, 8 for the 4 pins on IDSEL 1 etc.
133 */133 */
134 #interrupt-cells = <1>;
135 interrupt-map-mask = <0xf800 0 0 7>;
134 interrupt-map =136 interrupt-map =
135 /* IDSEL 1 */137 /* IDSEL 1 */
136 <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */138 <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi+8−0
@@ -74,5 +74,13 @@ · 73 unmodified lines
74 queue-rx = <&qmgr 0>;74 queue-rx = <&qmgr 0>;
75 queue-txready = <&qmgr 0>;75 queue-txready = <&qmgr 0>;
76 };76 };
77
78 ptp-timer@c8010000 {
79 compatible = "intel,ixp46x-ptp-timer";
80 reg = <0xc8010000 0x1000>;
81 interrupt-parent = <&gpio0>;
82 interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>;
83 interrupt-names = "master", "slave";
84 };
77 };85 };
78};86};
arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi+2−0
@@ -106,6 +106,8 @@ · 105 unmodified lines
106 * PCI slots on the BIXMB425BD base card.106 * PCI slots on the BIXMB425BD base card.
107 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.107 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
108 */108 */
109 #interrupt-cells = <1>;
110 interrupt-map-mask = <0xf800 0 0 7>;
109 interrupt-map =111 interrupt-map =
110 /* IDSEL 1 */112 /* IDSEL 1 */
111 <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */113 <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
arch/arm/boot/dts/intel-ixp4xx.dtsi+0−2
@@ -78,8 +78,6 @@ · 77 unmodified lines
78 dma-ranges =78 dma-ranges =
79 <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;79 <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
80 80
81 #interrupt-cells = <1>;
82 interrupt-map-mask = <0xf800 0 0 7>;
83 /* Each unique DTS using PCI must specify the swizzling */81 /* Each unique DTS using PCI must specify the swizzling */
84 };82 };
85 83
arch/arm/boot/dts/iwg20d-q7-common.dtsi+2−0
@@ -158,6 +158,8 @@ · 157 unmodified lines
158 status = "okay";158 status = "okay";
159 159
160 phy3: ethernet-phy@3 {160 phy3: ethernet-phy@3 {
161 compatible = "ethernet-phy-id0022.1622",
162 "ethernet-phy-ieee802.3-c22";
161 reg = <3>;163 reg = <3>;
162 micrel,led-mode = <1>;164 micrel,led-mode = <1>;
163 };165 };
arch/arm/boot/dts/ls1021a-qds.dts+25−60
@@ -1,49 +1,7 @@
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
1/*2/*
2 * Copyright 2013-2014 Freescale Semiconductor, Inc.3 * Copyright 2013-2014 Freescale Semiconductor, Inc.
3 * Copyright 2018 NXP4 * Copyright 2018 NXP
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 * a) This file is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This file is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public
21 * License along with this file; if not, write to the Free
22 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
23 * MA 02110-1301 USA
24 *
25 * Or, alternatively,
26 *
27 * b) Permission is hereby granted, free of charge, to any person
28 * obtaining a copy of this software and associated documentation
29 * files (the "Software"), to deal in the Software without
30 * restriction, including without limitation the rights to use,
31 * copy, modify, merge, publish, distribute, sublicense, and/or
32 * sell copies of the Software, and to permit persons to whom the
33 * Software is furnished to do so, subject to the following
34 * conditions:
35 *
36 * The above copyright notice and this permission notice shall be
37 * included in all copies or substantial portions of the Software.
38 *
39 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
40 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
41 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
42 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
43 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
44 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
45 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
46 * OTHER DEALINGS IN THE SOFTWARE.
47 */5 */
48 6
49/dts-v1/;7/dts-v1/;
@@ -67,19 +25,12 @@ · 17 unmodified lines
67 clock-frequency = <24576000>;25 clock-frequency = <24576000>;
68 };26 };
69 27
70 regulators {28 reg_3p3v: regulator {
71 compatible = "simple-bus";29 compatible = "regulator-fixed";
72 #address-cells = <1>;30 regulator-name = "3P3V";
73 #size-cells = <0>;31 regulator-min-microvolt = <3300000>;
74 32 regulator-max-microvolt = <3300000>;
75 reg_3p3v: regulator@0 {33 regulator-always-on;
76 compatible = "regulator-fixed";
77 reg = <0>;
78 regulator-name = "3P3V";
79 regulator-min-microvolt = <3300000>;
80 regulator-max-microvolt = <3300000>;
81 regulator-always-on;
82 };
83 };34 };
84 35
85 sound {36 sound {
@@ -231,9 +182,9 @@ · 145 unmodified lines
231 #address-cells = <2>;182 #address-cells = <2>;
232 #size-cells = <1>;183 #size-cells = <1>;
233 /* NOR, NAND Flashes and FPGA on board */184 /* NOR, NAND Flashes and FPGA on board */
234 ranges = <0x0 0x0 0x0 0x60000000 0x08000000185 ranges = <0x0 0x0 0x0 0x60000000 0x08000000>,
235 0x2 0x0 0x0 0x7e800000 0x00010000186 <0x2 0x0 0x0 0x7e800000 0x00010000>,
236 0x3 0x0 0x0 0x7fb00000 0x00000100>;187 <0x3 0x0 0x0 0x7fb00000 0x00000100>;
237 status = "okay";188 status = "okay";
238 189
239 nor@0,0 {190 nor@0,0 {
@@ -254,7 +205,7 @@ · 14 unmodified lines
254 fpga: board-control@3,0 {205 fpga: board-control@3,0 {
255 #address-cells = <1>;206 #address-cells = <1>;
256 #size-cells = <1>;207 #size-cells = <1>;
257 compatible = "simple-bus";208 compatible = "simple-mfd";
258 reg = <0x3 0x0 0x0000100>;209 reg = <0x3 0x0 0x0000100>;
259 bank-width = <1>;210 bank-width = <1>;
260 device-width = <1>;211 device-width = <1>;
@@ -328,6 +279,20 @@ · 67 unmodified lines
328 };279 };
329};280};
330 281
282&qspi {
283 status = "okay";
284
285 flash@0 {
286 compatible = "jedec,spi-nor";
287 #address-cells = <1>;
288 #size-cells = <1>;
289 spi-max-frequency = <20000000>;
290 reg = <0>;
291 spi-rx-bus-width = <4>;
292 spi-tx-bus-width = <4>;
293 };
294};
295
331&sai2 {296&sai2 {
332 status = "okay";297 status = "okay";
333};298};
arch/arm/boot/dts/ls1021a-tsn.dts+2−2
@@ -8,6 +8,7 @@ · 7 unmodified lines
8 8
9/ {9/ {
10 model = "NXP LS1021A-TSN Board";10 model = "NXP LS1021A-TSN Board";
11 compatible = "fsl,ls1021a-tsn", "fsl,ls1021a";
11 12
12 sys_mclk: clock-mclk {13 sys_mclk: clock-mclk {
13 compatible = "fixed-clock";14 compatible = "fixed-clock";
@@ -136,7 +137,6 @@ · 122 unmodified lines
136 /* 3 axis accelerometer */137 /* 3 axis accelerometer */
137 accelerometer@1e {138 accelerometer@1e {
138 compatible = "fsl,fxls8471";139 compatible = "fsl,fxls8471";
139 position = <0>;
140 reg = <0x1e>;140 reg = <0x1e>;
141 };141 };
142 142
@@ -251,7 +251,7 @@ · 108 unmodified lines
251 251
252 flash@0 {252 flash@0 {
253 /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */253 /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
254 compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";254 compatible = "jedec,spi-nor";
255 spi-max-frequency = <20000000>;255 spi-max-frequency = <20000000>;
256 #address-cells = <1>;256 #address-cells = <1>;
257 #size-cells = <1>;257 #size-cells = <1>;
arch/arm/boot/dts/ls1021a-twr.dts+7−56
@@ -1,49 +1,7 @@
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
1/*2/*
2 * Copyright 2013-2014 Freescale Semiconductor, Inc.3 * Copyright 2013-2014 Freescale Semiconductor, Inc.
3 * Copyright 2018 NXP4 * Copyright 2018 NXP
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 * a) This file is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This file is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public
21 * License along with this file; if not, write to the Free
22 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
23 * MA 02110-1301 USA
24 *
25 * Or, alternatively,
26 *
27 * b) Permission is hereby granted, free of charge, to any person
28 * obtaining a copy of this software and associated documentation
29 * files (the "Software"), to deal in the Software without
30 * restriction, including without limitation the rights to use,
31 * copy, modify, merge, publish, distribute, sublicense, and/or
32 * sell copies of the Software, and to permit persons to whom the
33 * Software is furnished to do so, subject to the following
34 * conditions:
35 *
36 * The above copyright notice and this permission notice shall be
37 * included in all copies or substantial portions of the Software.
38 *
39 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
40 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
41 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
42 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
43 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
44 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
45 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
46 * OTHER DEALINGS IN THE SOFTWARE.
47 */5 */
48 6
49/dts-v1/;7/dts-v1/;
@@ -65,19 +23,12 @@ · 15 unmodified lines
65 clock-frequency = <24576000>;23 clock-frequency = <24576000>;
66 };24 };
67 25
68 regulators {26 reg_3p3v: regulator {
69 compatible = "simple-bus";27 compatible = "regulator-fixed";
70 #address-cells = <1>;28 regulator-name = "3P3V";
71 #size-cells = <0>;29 regulator-min-microvolt = <3300000>;
72 30 regulator-max-microvolt = <3300000>;
73 reg_3p3v: regulator@0 {31 regulator-always-on;
74 compatible = "regulator-fixed";
75 reg = <0>;
76 regulator-name = "3P3V";
77 regulator-min-microvolt = <3300000>;
78 regulator-max-microvolt = <3300000>;
79 regulator-always-on;
80 };
81 };32 };
82 33
83 sound {34 sound {
arch/arm/boot/dts/ls1021a.dtsi+88−131
@@ -1,48 +1,6 @@
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
1/*2/*
2 * Copyright 2013-2014 Freescale Semiconductor, Inc.3 * Copyright 2013-2014 Freescale Semiconductor, Inc.
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public
20 * License along with this file; if not, write to the Free
21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 * MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 * b) Permission is hereby granted, free of charge, to any person
27 * obtaining a copy of this software and associated documentation
28 * files (the "Software"), to deal in the Software without
29 * restriction, including without limitation the rights to use,
30 * copy, modify, merge, publish, distribute, sublicense, and/or
31 * sell copies of the Software, and to permit persons to whom the
32 * Software is furnished to do so, subject to the following
33 * conditions:
34 *
35 * The above copyright notice and this permission notice shall be
36 * included in all copies or substantial portions of the Software.
37 *
38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 * OTHER DEALINGS IN THE SOFTWARE.
46 */4 */
47 5
48#include <dt-bindings/interrupt-controller/arm-gic.h>6#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -51,7 +9,6 @@ · 2 unmodified lines
51/ {9/ {
52 #address-cells = <2>;10 #address-cells = <2>;
53 #size-cells = <2>;11 #size-cells = <2>;
54 compatible = "fsl,ls1021a";
55 interrupt-parent = <&gic>;12 interrupt-parent = <&gic>;
56 13
57 aliases {14 aliases {
@@ -90,7 +47,7 @@ · 32 unmodified lines
90 };47 };
91 };48 };
92 49
93 memory {50 memory@0 {
94 device_type = "memory";51 device_type = "memory";
95 reg = <0x0 0x0 0x0 0x0>;52 reg = <0x0 0x0 0x0 0x0>;
96 };53 };
@@ -169,6 +126,7 @@ · 72 unmodified lines
169 compatible = "fsl,ifc", "simple-bus";126 compatible = "fsl,ifc", "simple-bus";
170 reg = <0x0 0x1530000 0x0 0x10000>;127 reg = <0x0 0x1530000 0x0 0x10000>;
171 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;128 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
129 status = "disabled";
172 };130 };
173 131
174 dcfg: dcfg@1ee0000 {132 dcfg: dcfg@1ee0000 {
@@ -290,78 +248,45 @@ · 115 unmodified lines
290 reg = <0x0 0x1f00000 0x0 0x10000>;248 reg = <0x0 0x1f00000 0x0 0x10000>;
291 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;249 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
292 fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>;250 fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>;
293 fsl,tmu-calibration = <0x00000000 0x00000020251 fsl,tmu-calibration = <0x00000000 0x00000020>,
294 0x00000001 0x00000024252 <0x00000001 0x00000024>,
295 0x00000002 0x0000002a253 <0x00000002 0x0000002a>,
296 0x00000003 0x00000032254 <0x00000003 0x00000032>,
297 0x00000004 0x00000038255 <0x00000004 0x00000038>,
298 0x00000005 0x0000003e256 <0x00000005 0x0000003e>,
299 0x00000006 0x00000043257 <0x00000006 0x00000043>,
300 0x00000007 0x0000004a258 <0x00000007 0x0000004a>,
301 0x00000008 0x00000050259 <0x00000008 0x00000050>,
302 0x00000009 0x00000059260 <0x00000009 0x00000059>,
303 0x0000000a 0x0000005f261 <0x0000000a 0x0000005f>,
304 0x0000000b 0x00000066262 <0x0000000b 0x00000066>,
305 263
306 0x00010000 0x00000023264 <0x00010000 0x00000023>,
307 0x00010001 0x0000002b265 <0x00010001 0x0000002b>,
308 0x00010002 0x00000033266 <0x00010002 0x00000033>,
309 0x00010003 0x0000003a267 <0x00010003 0x0000003a>,
310 0x00010004 0x00000042268 <0x00010004 0x00000042>,
311 0x00010005 0x0000004a269 <0x00010005 0x0000004a>,
312 0x00010006 0x00000054270 <0x00010006 0x00000054>,
313 0x00010007 0x0000005c271 <0x00010007 0x0000005c>,
314 0x00010008 0x00000065272 <0x00010008 0x00000065>,
315 0x00010009 0x0000006f273 <0x00010009 0x0000006f>,
316 274
317 0x00020000 0x00000029275 <0x00020000 0x00000029>,
318 0x00020001 0x00000033276 <0x00020001 0x00000033>,
319 0x00020002 0x0000003d277 <0x00020002 0x0000003d>,
320 0x00020003 0x00000048278 <0x00020003 0x00000048>,
321 0x00020004 0x00000054279 <0x00020004 0x00000054>,
322 0x00020005 0x00000060280 <0x00020005 0x00000060>,
323 0x00020006 0x0000006c281 <0x00020006 0x0000006c>,
324 282
325 0x00030000 0x00000025283 <0x00030000 0x00000025>,
326 0x00030001 0x00000033284 <0x00030001 0x00000033>,
327 0x00030002 0x00000043285 <0x00030002 0x00000043>,
328 0x00030003 0x00000055>;286 <0x00030003 0x00000055>;
329 #thermal-sensor-cells = <1>;287 #thermal-sensor-cells = <1>;
330 };288 };
331 289
332 thermal-zones {
333 cpu_thermal: cpu-thermal {
334 polling-delay-passive = <1000>;
335 polling-delay = <5000>;
336
337 thermal-sensors = <&tmu 0>;
338
339 trips {
340 cpu_alert: cpu-alert {
341 temperature = <85000>;
342 hysteresis = <2000>;
343 type = "passive";
344 };
345 cpu_crit: cpu-crit {
346 temperature = <95000>;
347 hysteresis = <2000>;
348 type = "critical";
349 };
350 };
351
352 cooling-maps {
353 map0 {
354 trip = <&cpu_alert>;
355 cooling-device =
356 <&cpu0 THERMAL_NO_LIMIT
357 THERMAL_NO_LIMIT>,
358 <&cpu1 THERMAL_NO_LIMIT
359 THERMAL_NO_LIMIT>;
360 };
361 };
362 };
363 };
364
365 dspi0: spi@2100000 {290 dspi0: spi@2100000 {
366 compatible = "fsl,ls1021a-v1.0-dspi";291 compatible = "fsl,ls1021a-v1.0-dspi";
367 #address-cells = <1>;292 #address-cells = <1>;
@@ -394,10 +319,9 @@ · 26 unmodified lines
394 #size-cells = <0>;319 #size-cells = <0>;
395 reg = <0x0 0x2180000 0x0 0x10000>;320 reg = <0x0 0x2180000 0x0 0x10000>;
396 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;321 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
397 clock-names = "i2c";
398 clocks = <&clockgen 4 1>;322 clocks = <&clockgen 4 1>;
399 dma-names = "tx", "rx";323 dma-names = "rx", "tx";
400 dmas = <&edma0 1 39>, <&edma0 1 38>;324 dmas = <&edma0 1 38>, <&edma0 1 39>;
401 status = "disabled";325 status = "disabled";
402 };326 };
403 327
@@ -407,10 +331,9 @@ · 3 unmodified lines
407 #size-cells = <0>;331 #size-cells = <0>;
408 reg = <0x0 0x2190000 0x0 0x10000>;332 reg = <0x0 0x2190000 0x0 0x10000>;
409 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;333 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
410 clock-names = "i2c";
411 clocks = <&clockgen 4 1>;334 clocks = <&clockgen 4 1>;
412 dma-names = "tx", "rx";335 dma-names = "rx", "tx";
413 dmas = <&edma0 1 37>, <&edma0 1 36>;336 dmas = <&edma0 1 36>, <&edma0 1 37>;
414 status = "disabled";337 status = "disabled";
415 };338 };
416 339
@@ -420,10 +343,9 @@ · 3 unmodified lines
420 #size-cells = <0>;343 #size-cells = <0>;
421 reg = <0x0 0x21a0000 0x0 0x10000>;344 reg = <0x0 0x21a0000 0x0 0x10000>;
422 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;345 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
423 clock-names = "i2c";
424 clocks = <&clockgen 4 1>;346 clocks = <&clockgen 4 1>;
425 dma-names = "tx", "rx";347 dma-names = "rx", "tx";
426 dmas = <&edma0 1 35>, <&edma0 1 34>;348 dmas = <&edma0 1 34>, <&edma0 1 35>;
427 status = "disabled";349 status = "disabled";
428 };350 };
429 351
@@ -884,8 +806,8 @@ · 454 unmodified lines
884 806
885 pcie@3400000 {807 pcie@3400000 {
886 compatible = "fsl,ls1021a-pcie";808 compatible = "fsl,ls1021a-pcie";
887 reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */809 reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */
888 0x40 0x00000000 0x0 0x00002000>; /* configuration space */810 <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
889 reg-names = "regs", "config";811 reg-names = "regs", "config";
890 interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */812 interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
891 fsl,pcie-scfg = <&scfg 0>;813 fsl,pcie-scfg = <&scfg 0>;
@@ -894,8 +816,8 @@ · 2 unmodified lines
894 device_type = "pci";816 device_type = "pci";
895 num-viewport = <6>;817 num-viewport = <6>;
896 bus-range = <0x0 0xff>;818 bus-range = <0x0 0xff>;
897 ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */819 ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */
898 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */820 <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
899 msi-parent = <&msi1>, <&msi2>;821 msi-parent = <&msi1>, <&msi2>;
900 #interrupt-cells = <1>;822 #interrupt-cells = <1>;
901 interrupt-map-mask = <0 0 0 7>;823 interrupt-map-mask = <0 0 0 7>;
@@ -908,8 +830,8 @@ · 6 unmodified lines
908 830
909 pcie@3500000 {831 pcie@3500000 {
910 compatible = "fsl,ls1021a-pcie";832 compatible = "fsl,ls1021a-pcie";
911 reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */833 reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */
912 0x48 0x00000000 0x0 0x00002000>; /* configuration space */834 <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
913 reg-names = "regs", "config";835 reg-names = "regs", "config";
914 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;836 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
915 fsl,pcie-scfg = <&scfg 1>;837 fsl,pcie-scfg = <&scfg 1>;
@@ -918,8 +840,8 @@ · 2 unmodified lines
918 device_type = "pci";840 device_type = "pci";
919 num-viewport = <6>;841 num-viewport = <6>;
920 bus-range = <0x0 0xff>;842 bus-range = <0x0 0xff>;
921 ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */843 ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */
922 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */844 <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
923 msi-parent = <&msi1>, <&msi2>;845 msi-parent = <&msi1>, <&msi2>;
924 #interrupt-cells = <1>;846 #interrupt-cells = <1>;
925 interrupt-map-mask = <0 0 0 7>;847 interrupt-map-mask = <0 0 0 7>;
@@ -992,6 +914,7 @@ · 66 unmodified lines
992 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;914 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
993 interrupt-names = "qdma-error",915 interrupt-names = "qdma-error",
994 "qdma-queue0", "qdma-queue1";916 "qdma-queue0", "qdma-queue1";
917 #dma-cells = <2>;
995 dma-channels = <8>;918 dma-channels = <8>;
996 block-number = <1>;919 block-number = <1>;
997 block-offset = <0x1000>;920 block-offset = <0x1000>;
@@ -1005,6 +928,7 @@ · 7 unmodified lines
1005 compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";928 compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
1006 reg = <0x0 0x1ee2140 0x0 0x8>;929 reg = <0x0 0x1ee2140 0x0 0x8>;
1007 #fsl,rcpm-wakeup-cells = <2>;930 #fsl,rcpm-wakeup-cells = <2>;
931 #power-domain-cells = <0>;
1008 };932 };
1009 933
1010 ftm_alarm0: timer0@29d0000 {934 ftm_alarm0: timer0@29d0000 {
@@ -1016,4 +940,37 @@ · 5 unmodified lines
1016 big-endian;940 big-endian;
1017 };941 };
1018 };942 };
943
944 thermal-zones {
945 cpu_thermal: cpu-thermal {
946 polling-delay-passive = <1000>;
947 polling-delay = <5000>;
948
949 thermal-sensors = <&tmu 0>;
950
951 trips {
952 cpu_alert: cpu-alert {
953 temperature = <85000>;
954 hysteresis = <2000>;
955 type = "passive";
956 };
957 cpu_crit: cpu-crit {
958 temperature = <95000>;
959 hysteresis = <2000>;
960 type = "critical";
961 };
962 };
963
964 cooling-maps {
965 map0 {
966 trip = <&cpu_alert>;
967 cooling-device =
968 <&cpu0 THERMAL_NO_LIMIT
969 THERMAL_NO_LIMIT>,
970 <&cpu1 THERMAL_NO_LIMIT
971 THERMAL_NO_LIMIT>;
972 };
973 };
974 };
975 };
1019};976};
arch/arm/boot/dts/mps2.dtsi+8−2
@@ -216,8 +216,13 @@ · 215 unmodified lines
216 compatible = "syscon", "simple-mfd";216 compatible = "syscon", "simple-mfd";
217 reg = <0x8000 0x10>;217 reg = <0x8000 0x10>;
218 218
219 led0 {219 ranges = <0x0 0x8000 0x10>;
220 #address-cells = <1>;
221 #size-cells = <1>;
222
223 led@0,0 {
220 compatible = "register-bit-led";224 compatible = "register-bit-led";
225 reg = <0x00 0x04>;
221 offset = <0x0>;226 offset = <0x0>;
222 mask = <0x01>;227 mask = <0x01>;
223 label = "userled:0";228 label = "userled:0";
@@ -225,8 +230,9 @@ · 1 unmodified line
225 default-state = "on";230 default-state = "on";
226 };231 };
227 232
228 led1 {233 led@0,1 {
229 compatible = "register-bit-led";234 compatible = "register-bit-led";
235 reg = <0x00 0x04>;
230 offset = <0x0>;236 offset = <0x0>;
231 mask = <0x02>;237 mask = <0x02>;
232 label = "userled:1";238 label = "userled:1";
arch/arm/boot/dts/mstar-v7.dtsi+9−0
@@ -39,6 +39,7 @@ · 38 unmodified lines
39 * u-boot is broken39 * u-boot is broken
40 */40 */
41 clock-frequency = <6000000>;41 clock-frequency = <6000000>;
42 arm,cpu-registers-not-fw-configured;
42 };43 };
43 44
44 pmu: pmu {45 pmu: pmu {
@@ -109,12 +110,20 @@ · 64 unmodified lines
109 mask = <0x79>;110 mask = <0x79>;
110 };111 };
111 112
113 rtc@2400 {
114 compatible = "mstar,msc313-rtc";
115 reg = <0x2400 0x40>;
116 clocks = <&xtal_div2>;
117 interrupts-extended = <&intc_irq GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
118 };
119
112 watchdog@6000 {120 watchdog@6000 {
113 compatible = "mstar,msc313e-wdt";121 compatible = "mstar,msc313e-wdt";
114 reg = <0x6000 0x1f>;122 reg = <0x6000 0x1f>;
115 clocks = <&xtal_div2>;123 clocks = <&xtal_div2>;
116 };124 };
117 125
126
118 intc_fiq: interrupt-controller@201310 {127 intc_fiq: interrupt-controller@201310 {
119 compatible = "mstar,mst-intc";128 compatible = "mstar,mst-intc";
120 reg = <0x201310 0x40>;129 reg = <0x201310 0x40>;
arch/arm/boot/dts/mt7623.dtsi+33−0
@@ -585,6 +585,39 @@ · 584 unmodified lines
585 status = "disabled";585 status = "disabled";
586 };586 };
587 587
588 usb0: usb@11200000 {
589 compatible = "mediatek,mt7623-musb",
590 "mediatek,mtk-musb";
591 reg = <0 0x11200000 0 0x1000>;
592 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
593 interrupt-names = "mc";
594 phys = <&u2port2 PHY_TYPE_USB2>;
595 dr_mode = "otg";
596 clocks = <&pericfg CLK_PERI_USB0>,
597 <&pericfg CLK_PERI_USB0_MCU>,
598 <&pericfg CLK_PERI_USB_SLV>;
599 clock-names = "main","mcu","univpll";
600 power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
601 status = "disabled";
602 };
603
604 u2phy1: t-phy@11210000 {
605 compatible = "mediatek,mt7623-tphy",
606 "mediatek,generic-tphy-v1";
607 reg = <0 0x11210000 0 0x0800>;
608 #address-cells = <2>;
609 #size-cells = <2>;
610 ranges;
611 status = "disabled";
612
613 u2port2: usb-phy@11210800 {
614 reg = <0 0x11210800 0 0x0100>;
615 clocks = <&topckgen CLK_TOP_USB_PHY48M>;
616 clock-names = "ref";
617 #phy-cells = <1>;
618 };
619 };
620
588 audsys: clock-controller@11220000 {621 audsys: clock-controller@11220000 {
589 compatible = "mediatek,mt7623-audsys",622 compatible = "mediatek,mt7623-audsys",
590 "mediatek,mt2701-audsys",623 "mediatek,mt2701-audsys",
arch/arm/boot/dts/mt7623a.dtsi+4−0
@@ -35,6 +35,10 @@ · 34 unmodified lines
35 clock-names = "ethif";35 clock-names = "ethif";
36};36};
37 37
38&usb0 {
39 power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
40};
41
38&usb1 {42&usb1 {
39 power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;43 power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
40};44};
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts+25−0
@@ -366,6 +366,14 @@ · 365 unmodified lines
366 status = "okay";366 status = "okay";
367};367};
368 368
369&pio {
370 musb_pins: musb {
371 pins-musb {
372 pinmux = <MT7623_PIN_237_EXT_SDIO2_FUNC_DRV_VBUS>;
373 };
374 };
375};
376
369&pwm {377&pwm {
370 pinctrl-names = "default";378 pinctrl-names = "default";
371 pinctrl-0 = <&pwm_pins_a>;379 pinctrl-0 = <&pwm_pins_a>;
@@ -396,6 +404,19 @@ · 24 unmodified lines
396 status = "okay";404 status = "okay";
397};405};
398 406
407&usb0 {
408 pinctrl-names = "default";
409 pinctrl-0 = <&musb_pins>;
410 status = "okay";
411 usb-role-switch;
412
413 connector {
414 compatible = "gpio-usb-b-connector", "usb-b-connector";
415 type = "micro";
416 id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
417 };
418};
419
399&usb1 {420&usb1 {
400 vusb33-supply = <&reg_3p3v>;421 vusb33-supply = <&reg_3p3v>;
401 vbus-supply = <&reg_5v>;422 vbus-supply = <&reg_5v>;
@@ -408,6 +429,10 @@ · 6 unmodified lines
408 status = "okay";429 status = "okay";
409};430};
410 431
432&u2phy1 {
433 status = "okay";
434};
435
411&u3phy1 {436&u3phy1 {
412 status = "okay";437 status = "okay";
413};438};
arch/arm/boot/dts/mt7629-rfb.dts+2−1
@@ -140,9 +140,10 @@ · 139 unmodified lines
140 };140 };
141};141};
142 142
143&pcie {143&pcie1 {
144 pinctrl-names = "default";144 pinctrl-names = "default";
145 pinctrl-0 = <&pcie_pins>;145 pinctrl-0 = <&pcie_pins>;
146 status = "okay";
146};147};
147 148
148&pciephy1 {149&pciephy1 {
arch/arm/boot/dts/mt7629.dtsi+21−24
@@ -361,16 +361,21 @@ · 360 unmodified lines
361 #reset-cells = <1>;361 #reset-cells = <1>;
362 };362 };
363 363
364 pcie: pcie@1a140000 {364 pciecfg: pciecfg@1a140000 {
365 compatible = "mediatek,generic-pciecfg", "syscon";
366 reg = <0x1a140000 0x1000>;
367 };
368
369 pcie1: pcie@1a145000 {
365 compatible = "mediatek,mt7629-pcie";370 compatible = "mediatek,mt7629-pcie";
366 device_type = "pci";371 device_type = "pci";
367 reg = <0x1a140000 0x1000>,372 reg = <0x1a145000 0x1000>;
368 <0x1a145000 0x1000>;373 reg-names = "port1";
369 reg-names = "subsys","port1";374 linux,pci-domain = <1>;
370 #address-cells = <3>;375 #address-cells = <3>;
371 #size-cells = <2>;376 #size-cells = <2>;
372 interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,377 interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
373 <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;378 interrupt-names = "pcie_irq";
374 clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,379 clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
375 <&pciesys CLK_PCIE_P0_AHB_EN>,380 <&pciesys CLK_PCIE_P0_AHB_EN>,
376 <&pciesys CLK_PCIE_P1_AUX_EN>,381 <&pciesys CLK_PCIE_P1_AUX_EN>,
@@ -391,26 +396,18 @@ · 14 unmodified lines
391 power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;396 power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
392 bus-range = <0x00 0xff>;397 bus-range = <0x00 0xff>;
393 ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;398 ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
399 status = "disabled";
394 400
395 pcie1: pcie@1,0 {401 #interrupt-cells = <1>;
396 device_type = "pci";402 interrupt-map-mask = <0 0 0 7>;
397 reg = <0x0800 0 0 0 0>;403 interrupt-map = <0 0 0 1 &pcie_intc1 0>,
398 #address-cells = <3>;404 <0 0 0 2 &pcie_intc1 1>,
399 #size-cells = <2>;405 <0 0 0 3 &pcie_intc1 2>,
406 <0 0 0 4 &pcie_intc1 3>;
407 pcie_intc1: interrupt-controller {
408 interrupt-controller;
409 #address-cells = <0>;
400 #interrupt-cells = <1>;410 #interrupt-cells = <1>;
401 ranges;
402 num-lanes = <1>;
403 interrupt-map-mask = <0 0 0 7>;
404 interrupt-map = <0 0 0 1 &pcie_intc1 0>,
405 <0 0 0 2 &pcie_intc1 1>,
406 <0 0 0 3 &pcie_intc1 2>,
407 <0 0 0 4 &pcie_intc1 3>;
408
409 pcie_intc1: interrupt-controller {
410 interrupt-controller;
411 #address-cells = <0>;
412 #interrupt-cells = <1>;
413 };
414 };411 };
415 };412 };
416 413
arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi+2−2
@@ -25,8 +25,8 @@ · 24 unmodified lines
25 compatible = "smsc,lan9221", "smsc,lan9115";25 compatible = "smsc,lan9221", "smsc,lan9115";
26 bank-width = <2>;26 bank-width = <2>;
27 gpmc,device-width = <1>;27 gpmc,device-width = <1>;
28 gpmc,cycle2cycle-samecsen = <1>;28 gpmc,cycle2cycle-samecsen;
29 gpmc,cycle2cycle-diffcsen = <1>;29 gpmc,cycle2cycle-diffcsen;
30 gpmc,cs-on-ns = <5>;30 gpmc,cs-on-ns = <5>;
31 gpmc,cs-rd-off-ns = <150>;31 gpmc,cs-rd-off-ns = <150>;
32 gpmc,cs-wr-off-ns = <150>;32 gpmc,cs-wr-off-ns = <150>;
arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi+1−1
@@ -29,7 +29,7 @@ · 28 unmodified lines
29 compatible = "smsc,lan9221","smsc,lan9115";29 compatible = "smsc,lan9221","smsc,lan9115";
30 bank-width = <2>;30 bank-width = <2>;
31 31
32 gpmc,mux-add-data;32 gpmc,mux-add-data = <0>;
33 gpmc,cs-on-ns = <0>;33 gpmc,cs-on-ns = <0>;
34 gpmc,cs-rd-off-ns = <42>;34 gpmc,cs-rd-off-ns = <42>;
35 gpmc,cs-wr-off-ns = <36>;35 gpmc,cs-wr-off-ns = <36>;
arch/arm/boot/dts/omap-zoom-common.dtsi+2−2
@@ -27,8 +27,8 @@ · 26 unmodified lines
27 gpmc,mux-add-data = <0>;27 gpmc,mux-add-data = <0>;
28 gpmc,device-width = <1>;28 gpmc,device-width = <1>;
29 gpmc,wait-pin = <1>;29 gpmc,wait-pin = <1>;
30 gpmc,cycle2cycle-samecsen = <1>;30 gpmc,cycle2cycle-samecsen;
31 gpmc,cycle2cycle-diffcsen = <1>;31 gpmc,cycle2cycle-diffcsen;
32 gpmc,cs-on-ns = <5>;32 gpmc,cs-on-ns = <5>;
33 gpmc,cs-rd-off-ns = <155>;33 gpmc,cs-rd-off-ns = <155>;
34 gpmc,cs-wr-off-ns = <155>;34 gpmc,cs-wr-off-ns = <155>;
arch/arm/boot/dts/omap2430-sdp.dts+2−2
@@ -43,8 +43,8 @@ · 42 unmodified lines
43 gpmc,sync-clk-ps = <0>;43 gpmc,sync-clk-ps = <0>;
44 gpmc,mux-add-data = <2>;44 gpmc,mux-add-data = <2>;
45 gpmc,device-width = <1>;45 gpmc,device-width = <1>;
46 gpmc,cycle2cycle-samecsen = <1>;46 gpmc,cycle2cycle-samecsen;
47 gpmc,cycle2cycle-diffcsen = <1>;47 gpmc,cycle2cycle-diffcsen;
48 gpmc,cs-on-ns = <6>;48 gpmc,cs-on-ns = <6>;
49 gpmc,cs-rd-off-ns = <187>;49 gpmc,cs-rd-off-ns = <187>;
50 gpmc,cs-wr-off-ns = <187>;50 gpmc,cs-wr-off-ns = <187>;
arch/arm/boot/dts/omap3-cpu-thermal.dtsi+1−1
@@ -10,7 +10,7 @@ · 9 unmodified lines
10 10
11#include <dt-bindings/thermal/thermal.h>11#include <dt-bindings/thermal/thermal.h>
12 12
13cpu_thermal: cpu_thermal {13cpu_thermal: cpu-thermal {
14 polling-delay-passive = <250>; /* milliseconds */14 polling-delay-passive = <250>; /* milliseconds */
15 polling-delay = <1000>; /* milliseconds */15 polling-delay = <1000>; /* milliseconds */
16 coefficients = <0 20000>;16 coefficients = <0 20000>;
arch/arm/boot/dts/omap3-devkit8000-common.dtsi+2−2
@@ -267,8 +267,8 @@ · 266 unmodified lines
267 gpmc,mux-add-data = <0>;267 gpmc,mux-add-data = <0>;
268 gpmc,device-width = <1>;268 gpmc,device-width = <1>;
269 gpmc,wait-pin = <0>;269 gpmc,wait-pin = <0>;
270 gpmc,cycle2cycle-samecsen = <1>;270 gpmc,cycle2cycle-samecsen;
271 gpmc,cycle2cycle-diffcsen = <1>;271 gpmc,cycle2cycle-diffcsen;
272 272
273 gpmc,cs-on-ns = <6>;273 gpmc,cs-on-ns = <6>;
274 gpmc,cs-rd-off-ns = <180>;274 gpmc,cs-rd-off-ns = <180>;
arch/arm/boot/dts/omap3-gta04.dtsi+13−10
@@ -104,16 +104,16 @@ · 103 unmodified lines
104 #sound-dai-cells = <0>;104 #sound-dai-cells = <0>;
105 };105 };
106 106
107 spi_lcd: spi_lcd {107 spi_lcd: spi {
108 compatible = "spi-gpio";108 compatible = "spi-gpio";
109 #address-cells = <0x1>;109 #address-cells = <0x1>;
110 #size-cells = <0x0>;110 #size-cells = <0x0>;
111 pinctrl-names = "default";111 pinctrl-names = "default";
112 pinctrl-0 = <&spi_gpio_pins>;112 pinctrl-0 = <&spi_gpio_pins>;
113 113
114 gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;114 sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
115 gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;115 miso-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
116 gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;116 mosi-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
117 cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;117 cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
118 num-chipselects = <1>;118 num-chipselects = <1>;
119 119
@@ -508,6 +508,8 @@ · 388 unmodified lines
508 pinctrl-0 = <&bmp085_pins>;508 pinctrl-0 = <&bmp085_pins>;
509 interrupt-parent = <&gpio4>;509 interrupt-parent = <&gpio4>;
510 interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */510 interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
511 vdda-supply = <&vio>;
512 vddd-supply = <&vio>;
511 };513 };
512 514
513 /* accelerometer */515 /* accelerometer */
@@ -515,7 +517,7 @@ · 1 unmodified line
515 compatible = "bosch,bma180";517 compatible = "bosch,bma180";
516 reg = <0x41>;518 reg = <0x41>;
517 pinctrl-names = "default";519 pinctrl-names = "default";
518 pintcrl-0 = <&bma180_pins>;520 pinctrl-0 = <&bma180_pins>;
519 interrupt-parent = <&gpio4>;521 interrupt-parent = <&gpio4>;
520 interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */522 interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
521 };523 };
@@ -540,28 +542,29 @@ · 18 unmodified lines
540 gpio-controller;542 gpio-controller;
541 #gpio-cells = <2>;543 #gpio-cells = <2>;
542 544
543 gta04_led0: red_aux@0 {545 gta04_led0: led@0 {
544 label = "gta04:red:aux";546 label = "gta04:red:aux";
545 reg = <0x0>;547 reg = <0x0>;
546 };548 };
547 549
548 gta04_led1: green_aux@1 {550 gta04_led1: led@1 {
549 label = "gta04:green:aux";551 label = "gta04:green:aux";
550 reg = <0x1>;552 reg = <0x1>;
551 };553 };
552 554
553 gta04_led3: red_power@3 {555 gta04_led3: led@3 {
554 label = "gta04:red:power";556 label = "gta04:red:power";
555 reg = <0x3>;557 reg = <0x3>;
556 linux,default-trigger = "default-on";558 linux,default-trigger = "default-on";
557 };559 };
558 560
559 gta04_led4: green_power@4 {561 gta04_led4: led@4 {
560 label = "gta04:green:power";562 label = "gta04:green:power";
561 reg = <0x4>;563 reg = <0x4>;
562 };564 };
563 565
564 wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */566 wifi_reset: led@6 {
567 /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
565 reg = <0x6>;568 reg = <0x6>;
566 compatible = "gpio";569 compatible = "gpio";
567 };570 };
arch/arm/boot/dts/omap3-gta04a5.dts+2−0
@@ -133,5 +133,7 @@ · 132 unmodified lines
133 bme280@76 {133 bme280@76 {
134 compatible = "bosch,bme280";134 compatible = "bosch,bme280";
135 reg = <0x76>;135 reg = <0x76>;
136 vdda-supply = <&vio>;
137 vddd-supply = <&vio>;
136 };138 };
137};139};
arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi+1−1
@@ -22,7 +22,7 @@ · 21 unmodified lines
22 compatible = "smsc,lan9221","smsc,lan9115";22 compatible = "smsc,lan9221","smsc,lan9115";
23 bank-width = <2>;23 bank-width = <2>;
24 24
25 gpmc,mux-add-data;25 gpmc,mux-add-data = <0>;
26 gpmc,cs-on-ns = <0>;26 gpmc,cs-on-ns = <0>;
27 gpmc,cs-rd-off-ns = <42>;27 gpmc,cs-rd-off-ns = <42>;
28 gpmc,cs-wr-off-ns = <36>;28 gpmc,cs-wr-off-ns = <36>;
arch/arm/boot/dts/omap3-sb-t35.dtsi+2−2
@@ -108,8 +108,8 @@ · 107 unmodified lines
108 reg = <4 0 0xff>;108 reg = <4 0 0xff>;
109 bank-width = <2>;109 bank-width = <2>;
110 gpmc,device-width = <1>;110 gpmc,device-width = <1>;
111 gpmc,cycle2cycle-samecsen = <1>;111 gpmc,cycle2cycle-samecsen;
112 gpmc,cycle2cycle-diffcsen = <1>;112 gpmc,cycle2cycle-diffcsen;
113 gpmc,cs-on-ns = <5>;113 gpmc,cs-on-ns = <5>;
114 gpmc,cs-rd-off-ns = <150>;114 gpmc,cs-rd-off-ns = <150>;
115 gpmc,cs-wr-off-ns = <150>;115 gpmc,cs-wr-off-ns = <150>;
arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts+237−0
@@ -0,0 +1,237 @@
1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
4 */
5
6/dts-v1/;
7
8#include "qcom-msm8226.dtsi"
9#include "qcom-pm8226.dtsi"
10
11/ {
12 model = "LG G Watch R";
13 compatible = "lg,lenok", "qcom,apq8026";
14 qcom,board-id = <132 0x0a>;
15 qcom,msm-id = <199 0x20000>;
16
17 aliases {
18 serial0 = &blsp1_uart3;
19 };
20
21 chosen {
22 stdout-path = "serial0:115200n8";
23 };
24};
25
26&blsp1_i2c5 {
27 status = "okay";
28 clock-frequency = <384000>;
29
30 touchscreen@20 {
31 compatible = "syna,rmi4-i2c";
32 reg = <0x20>;
33
34 interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
35 vdd-supply = <&pm8226_l15>;
36 vio-supply = <&pm8226_l22>;
37
38 pinctrl-names = "default";
39 pinctrl-0 = <&touch_pins>;
40
41 #address-cells = <1>;
42 #size-cells = <0>;
43
44 rmi4-f01@1 {
45 reg = <0x1>;
46 syna,nosleep-mode = <1>;
47 };
48
49 rmi4-f12@12 {
50 reg = <0x12>;
51 syna,sensor-type = <1>;
52 };
53 };
54};
55
56&blsp1_uart3 {
57 status = "okay";
58};
59
60&rpm_requests {
61 pm8226-regulators {
62 compatible = "qcom,rpm-pm8226-regulators";
63
64 pm8226_s1: s1 {
65 regulator-min-microvolt = <500000>;
66 regulator-max-microvolt = <1275000>;
67 };
68 pm8226_s3: s3 {
69 regulator-min-microvolt = <1200000>;
70 regulator-max-microvolt = <1350000>;
71 };
72 pm8226_s4: s4 {
73 regulator-min-microvolt = <1800000>;
74 regulator-max-microvolt = <2200000>;
75 };
76 pm8226_s5: s5 {
77 regulator-min-microvolt = <1150000>;
78 regulator-max-microvolt = <1150000>;
79 };
80
81 pm8226_l1: l1 {
82 regulator-min-microvolt = <1225000>;
83 regulator-max-microvolt = <1225000>;
84 };
85 pm8226_l2: l2 {
86 regulator-min-microvolt = <1200000>;
87 regulator-max-microvolt = <1200000>;
88 };
89 pm8226_l3: l3 {
90 regulator-min-microvolt = <750000>;
91 regulator-max-microvolt = <1337500>;
92 };
93 pm8226_l4: l4 {
94 regulator-min-microvolt = <1200000>;
95 regulator-max-microvolt = <1200000>;
96 };
97 pm8226_l5: l5 {
98 regulator-min-microvolt = <1200000>;
99 regulator-max-microvolt = <1200000>;
100 };
101 pm8226_l6: l6 {
102 regulator-min-microvolt = <1800000>;
103 regulator-max-microvolt = <1800000>;
104 };
105 pm8226_l7: l7 {
106 regulator-min-microvolt = <1850000>;
107 regulator-max-microvolt = <1850000>;
108 };
109 pm8226_l8: l8 {
110 regulator-min-microvolt = <1800000>;
111 regulator-max-microvolt = <1800000>;
112 };
113 pm8226_l9: l9 {
114 regulator-min-microvolt = <2050000>;
115 regulator-max-microvolt = <2050000>;
116 };
117 pm8226_l10: l10 {
118 regulator-min-microvolt = <1800000>;
119 regulator-max-microvolt = <1800000>;
120 };
121 pm8226_l12: l12 {
122 regulator-min-microvolt = <1800000>;
123 regulator-max-microvolt = <1800000>;
124 };
125 pm8226_l14: l14 {
126 regulator-min-microvolt = <2750000>;
127 regulator-max-microvolt = <2750000>;
128 };
129 pm8226_l15: l15 {
130 regulator-min-microvolt = <3300000>;
131 regulator-max-microvolt = <3300000>;
132 };
133 pm8226_l16: l16 {
134 regulator-min-microvolt = <3000000>;
135 regulator-max-microvolt = <3350000>;
136 };
137 pm8226_l17: l17 {
138 regulator-min-microvolt = <2950000>;
139 regulator-max-microvolt = <2950000>;
140 };
141 pm8226_l18: l18 {
142 regulator-min-microvolt = <3000000>;
143 regulator-max-microvolt = <3300000>;
144 };
145 pm8226_l19: l19 {
146 regulator-min-microvolt = <3000000>;
147 regulator-max-microvolt = <3000000>;
148 };
149 pm8226_l20: l20 {
150 regulator-min-microvolt = <3075000>;
151 regulator-max-microvolt = <3075000>;
152 };
153 pm8226_l21: l21 {
154 regulator-min-microvolt = <1800000>;
155 regulator-max-microvolt = <2950000>;
156 };
157 pm8226_l22: l22 {
158 regulator-min-microvolt = <1800000>;
159 regulator-max-microvolt = <1800000>;
160 };
161 pm8226_l23: l23 {
162 regulator-min-microvolt = <1800000>;
163 regulator-max-microvolt = <2950000>;
164 };
165 pm8226_l24: l24 {
166 regulator-min-microvolt = <1300000>;
167 regulator-max-microvolt = <1350000>;
168 };
169 pm8226_l25: l25 {
170 regulator-min-microvolt = <1775000>;
171 regulator-max-microvolt = <2125000>;
172 };
173 pm8226_l26: l26 {
174 regulator-min-microvolt = <1225000>;
175 regulator-max-microvolt = <1225000>;
176 };
177 pm8226_l27: l27 {
178 regulator-min-microvolt = <2050000>;
179 regulator-max-microvolt = <2050000>;
180 };
181 pm8226_l28: l28 {
182 regulator-min-microvolt = <2700000>;
183 regulator-max-microvolt = <3000000>;
184 };
185
186 pm8226_lvs1: lvs1 {};
187 };
188};
189
190&sdhc_1 {
191 status = "okay";
192
193 vmmc-supply = <&pm8226_l17>;
194 vqmmc-supply = <&pm8226_l6>;
195
196 bus-width = <8>;
197 non-removable;
198
199 pinctrl-names = "default";
200 pinctrl-0 = <&sdhc1_pin_a>;
201};
202
203&tlmm {
204 sdhc1_pin_a: sdhc1-pin-active {
205 clk {
206 pins = "sdc1_clk";
207 drive-strength = <10>;
208 bias-disable;
209 };
210
211 cmd-data {
212 pins = "sdc1_cmd", "sdc1_data";
213 drive-strength = <10>;
214 bias-pull-up;
215 };
216 };
217
218 touch_pins: touch {
219 irq {
220 pins = "gpio17";
221 function = "gpio";
222
223 drive-strength = <8>;
224 bias-pull-down;
225 input-enable;
226 };
227
228 reset {
229 pins = "gpio16";
230 function = "gpio";
231
232 drive-strength = <8>;
233 bias-disable;
234 output-high;
235 };
236 };
237};
arch/arm/boot/dts/qcom-apq8060-dragonboard.dts+5−5
@@ -357,8 +357,8 @@ · 356 unmodified lines
357 };357 };
358 358
359 mpps@50 {359 mpps@50 {
360 dragon_cm3605_mpps: cm3605-mpps {360 dragon_cm3605_mpps: cm3605-mpps-state {
361 pinconf {361 mpp5 {
362 pins = "mpp5";362 pins = "mpp5";
363 function = "analog";363 function = "analog";
364 input-enable;364 input-enable;
@@ -899,7 +899,7 @@ · 534 unmodified lines
899 };899 };
900 amba {900 amba {
901 /* Internal 3.69 GiB eMMC */901 /* Internal 3.69 GiB eMMC */
902 sdcc@12400000 {902 mmc@12400000 {
903 status = "okay";903 status = "okay";
904 pinctrl-names = "default";904 pinctrl-names = "default";
905 pinctrl-0 = <&dragon_sdcc1_pins>;905 pinctrl-0 = <&dragon_sdcc1_pins>;
@@ -908,7 +908,7 @@ · 2 unmodified lines
908 };908 };
909 909
910 /* External micro SD card, directly connected, pulled up to 2.85 V */910 /* External micro SD card, directly connected, pulled up to 2.85 V */
911 sdcc@12180000 {911 mmc@12180000 {
912 status = "okay";912 status = "okay";
913 /* Enable SSBI GPIO 22 as input, use for card detect */913 /* Enable SSBI GPIO 22 as input, use for card detect */
914 pinctrl-names = "default";914 pinctrl-names = "default";
@@ -922,7 +922,7 @@ · 7 unmodified lines
922 * Second external micro SD card, using two TXB104RGYR levelshifters922 * Second external micro SD card, using two TXB104RGYR levelshifters
923 * to lift from 1.8 V to 2.85 V923 * to lift from 1.8 V to 2.85 V
924 */924 */
925 sdcc@12200000 {925 mmc@12200000 {
926 status = "okay";926 status = "okay";
927 /* Enable SSBI GPIO 26 as input, use for card detect */927 /* Enable SSBI GPIO 26 as input, use for card detect */
928 pinctrl-names = "default";928 pinctrl-names = "default";
arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts+1−1
@@ -335,7 +335,7 @@ · 334 unmodified lines
335 335
336 amba {336 amba {
337 /* eMMC */337 /* eMMC */
338 sdcc@12400000 {338 mmc@12400000 {
339 status = "okay";339 status = "okay";
340 vmmc-supply = <&pm8921_l5>;340 vmmc-supply = <&pm8921_l5>;
341 vqmmc-supply = <&pm8921_s4>;341 vqmmc-supply = <&pm8921_s4>;
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts+3−3
@@ -220,14 +220,14 @@ · 219 unmodified lines
220 220
221 amba {221 amba {
222 /* eMMC */222 /* eMMC */
223 sdcc1: sdcc@12400000 {223 sdcc1: mmc@12400000 {
224 status = "okay";224 status = "okay";
225 vmmc-supply = <&pm8921_l5>;225 vmmc-supply = <&pm8921_l5>;
226 vqmmc-supply = <&pm8921_s4>;226 vqmmc-supply = <&pm8921_s4>;
227 };227 };
228 228
229 /* External micro SD card */229 /* External micro SD card */
230 sdcc3: sdcc@12180000 {230 sdcc3: mmc@12180000 {
231 status = "okay";231 status = "okay";
232 vmmc-supply = <&v3p3_fixed>;232 vmmc-supply = <&v3p3_fixed>;
233 pinctrl-names = "default";233 pinctrl-names = "default";
@@ -235,7 +235,7 @@ · 1 unmodified line
235 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;235 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
236 };236 };
237 /* WLAN */237 /* WLAN */
238 sdcc4: sdcc@121c0000 {238 sdcc4: mmc@121c0000 {
239 status = "okay";239 status = "okay";
240 vmmc-supply = <&v3p3_fixed>;240 vmmc-supply = <&v3p3_fixed>;
241 vqmmc-supply = <&v3p3_fixed>;241 vqmmc-supply = <&v3p3_fixed>;
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts+3−3
@@ -314,14 +314,14 @@ · 313 unmodified lines
314 314
315 amba {315 amba {
316 /* eMMC */316 /* eMMC */
317 sdcc1: sdcc@12400000 {317 sdcc1: mmc@12400000 {
318 status = "okay";318 status = "okay";
319 vmmc-supply = <&pm8921_l5>;319 vmmc-supply = <&pm8921_l5>;
320 vqmmc-supply = <&pm8921_s4>;320 vqmmc-supply = <&pm8921_s4>;
321 };321 };
322 322
323 /* External micro SD card */323 /* External micro SD card */
324 sdcc3: sdcc@12180000 {324 sdcc3: mmc@12180000 {
325 status = "okay";325 status = "okay";
326 vmmc-supply = <&pm8921_l6>;326 vmmc-supply = <&pm8921_l6>;
327 pinctrl-names = "default";327 pinctrl-names = "default";
@@ -329,7 +329,7 @@ · 1 unmodified line
329 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;329 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
330 };330 };
331 /* WLAN */331 /* WLAN */
332 sdcc4: sdcc@121c0000 {332 sdcc4: mmc@121c0000 {
333 status = "okay";333 status = "okay";
334 vmmc-supply = <&ext_3p3v>;334 vmmc-supply = <&ext_3p3v>;
335 vqmmc-supply = <&pm8921_lvs1>;335 vqmmc-supply = <&pm8921_lvs1>;
arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts+2−2
@@ -374,14 +374,14 @@ · 373 unmodified lines
374 };374 };
375 375
376 amba {376 amba {
377 sdcc1: sdcc@12400000 {377 sdcc1: mmc@12400000 {
378 status = "okay";378 status = "okay";
379 379
380 vmmc-supply = <&pm8921_l5>;380 vmmc-supply = <&pm8921_l5>;
381 vqmmc-supply = <&pm8921_s4>;381 vqmmc-supply = <&pm8921_s4>;
382 };382 };
383 383
384 sdcc3: sdcc@12180000 {384 sdcc3: mmc@12180000 {
385 status = "okay";385 status = "okay";
386 386
387 vmmc-supply = <&pm8921_l6>;387 vmmc-supply = <&pm8921_l6>;
arch/arm/boot/dts/qcom-apq8064.dtsi+28−35
@@ -95,13 +95,13 @@ · 94 unmodified lines
95 };95 };
96 };96 };
97 97
98 memory {98 memory@0 {
99 device_type = "memory";99 device_type = "memory";
100 reg = <0x0 0x0>;100 reg = <0x0 0x0>;
101 };101 };
102 102
103 thermal-zones {103 thermal-zones {
104 cpu-thermal0 {104 cpu0-thermal {
105 polling-delay-passive = <250>;105 polling-delay-passive = <250>;
106 polling-delay = <1000>;106 polling-delay = <1000>;
107 107
@@ -122,7 +122,7 @@ · 14 unmodified lines
122 };122 };
123 };123 };
124 124
125 cpu-thermal1 {125 cpu1-thermal {
126 polling-delay-passive = <250>;126 polling-delay-passive = <250>;
127 polling-delay = <1000>;127 polling-delay = <1000>;
128 128
@@ -143,7 +143,7 @@ · 14 unmodified lines
143 };143 };
144 };144 };
145 145
146 cpu-thermal2 {146 cpu2-thermal {
147 polling-delay-passive = <250>;147 polling-delay-passive = <250>;
148 polling-delay = <1000>;148 polling-delay = <1000>;
149 149
@@ -164,7 +164,7 @@ · 14 unmodified lines
164 };164 };
165 };165 };
166 166
167 cpu-thermal3 {167 cpu3-thermal {
168 polling-delay-passive = <250>;168 polling-delay-passive = <250>;
169 polling-delay = <1000>;169 polling-delay = <1000>;
170 170
@@ -683,12 +683,11 @@ · 512 unmodified lines
683 pm8821_mpps: mpps@50 {683 pm8821_mpps: mpps@50 {
684 compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";684 compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
685 reg = <0x50>;685 reg = <0x50>;
686 interrupts = <24 IRQ_TYPE_NONE>,686 interrupt-controller;
687 <25 IRQ_TYPE_NONE>,687 #interrupt-cells = <2>;
688 <26 IRQ_TYPE_NONE>,
689 <27 IRQ_TYPE_NONE>;
690 gpio-controller;688 gpio-controller;
691 #gpio-cells = <2>;689 #gpio-cells = <2>;
690 gpio-ranges = <&pm8821_mpps 0 0 4>;
692 };691 };
693 };692 };
694 };693 };
@@ -726,19 +725,9 @@ · 31 unmodified lines
726 reg = <0x50>;725 reg = <0x50>;
727 gpio-controller;726 gpio-controller;
728 #gpio-cells = <2>;727 #gpio-cells = <2>;
729 interrupts =728 gpio-ranges = <&pm8921_mpps 0 0 12>;
730 <128 IRQ_TYPE_NONE>,729 interrupt-controller;
731 <129 IRQ_TYPE_NONE>,730 #interrupt-cells = <2>;
732 <130 IRQ_TYPE_NONE>,
733 <131 IRQ_TYPE_NONE>,
734 <132 IRQ_TYPE_NONE>,
735 <133 IRQ_TYPE_NONE>,
736 <134 IRQ_TYPE_NONE>,
737 <135 IRQ_TYPE_NONE>,
738 <136 IRQ_TYPE_NONE>,
739 <137 IRQ_TYPE_NONE>,
740 <138 IRQ_TYPE_NONE>,
741 <139 IRQ_TYPE_NONE>;
742 };731 };
743 732
744 rtc@11d {733 rtc@11d {
@@ -1084,7 +1073,7 @@ · 339 unmodified lines
1084 #address-cells = <1>;1073 #address-cells = <1>;
1085 #size-cells = <1>;1074 #size-cells = <1>;
1086 ranges;1075 ranges;
1087 sdcc1: sdcc@12400000 {1076 sdcc1: mmc@12400000 {
1088 status = "disabled";1077 status = "disabled";
1089 compatible = "arm,pl18x", "arm,primecell";1078 compatible = "arm,pl18x", "arm,primecell";
1090 pinctrl-names = "default";1079 pinctrl-names = "default";
@@ -1104,7 +1093,7 @@ · 13 unmodified lines
1104 dma-names = "tx", "rx";1093 dma-names = "tx", "rx";
1105 };1094 };
1106 1095
1107 sdcc3: sdcc@12180000 {1096 sdcc3: mmc@12180000 {
1108 compatible = "arm,pl18x", "arm,primecell";1097 compatible = "arm,pl18x", "arm,primecell";
1109 arm,primecell-periphid = <0x00051180>;1098 arm,primecell-periphid = <0x00051180>;
1110 status = "disabled";1099 status = "disabled";
@@ -1122,7 +1111,7 @@ · 11 unmodified lines
1122 dma-names = "tx", "rx";1111 dma-names = "tx", "rx";
1123 };1112 };
1124 1113
1125 sdcc4: sdcc@121c0000 {1114 sdcc4: mmc@121c0000 {
1126 compatible = "arm,pl18x", "arm,primecell";1115 compatible = "arm,pl18x", "arm,primecell";
1127 arm,primecell-periphid = <0x00051180>;1116 arm,primecell-periphid = <0x00051180>;
1128 status = "disabled";1117 status = "disabled";
@@ -1229,13 +1218,17 @@ · 100 unmodified lines
1229 &gfx3d1 301218 &gfx3d1 30
1230 &gfx3d1 31>;1219 &gfx3d1 31>;
1231 1220
1232 qcom,gpu-pwrlevels {1221 operating-points-v2 = <&gpu_opp_table>;
1233 compatible = "qcom,gpu-pwrlevels";1222
1234 qcom,gpu-pwrlevel@0 {1223 gpu_opp_table: opp-table {
1235 qcom,gpu-freq = <450000000>;1224 compatible = "operating-points-v2";
1225
1226 opp-320000000 {
1227 opp-hz = /bits/ 64 <450000000>;
1236 };1228 };
1237 qcom,gpu-pwrlevel@1 {1229
1238 qcom,gpu-freq = <27000000>;1230 opp-27000000 {
1231 opp-hz = /bits/ 64 <27000000>;
1239 };1232 };
1240 };1233 };
1241 };1234 };
@@ -1419,9 +1412,9 @@ · 177 unmodified lines
1419 clocks = <&mmcc HDMI_APP_CLK>,1412 clocks = <&mmcc HDMI_APP_CLK>,
1420 <&mmcc HDMI_M_AHB_CLK>,1413 <&mmcc HDMI_M_AHB_CLK>,
1421 <&mmcc HDMI_S_AHB_CLK>;1414 <&mmcc HDMI_S_AHB_CLK>;
1422 clock-names = "core_clk",1415 clock-names = "core",
1423 "master_iface_clk",1416 "master_iface",
1424 "slave_iface_clk";1417 "slave_iface";
1425 1418
1426 phys = <&hdmi_phy>;1419 phys = <&hdmi_phy>;
1427 phy-names = "hdmi-phy";1420 phy-names = "hdmi-phy";
@@ -1452,7 +1445,7 @@ · 24 unmodified lines
1452 "hdmi_pll";1445 "hdmi_pll";
1453 1446
1454 clocks = <&mmcc HDMI_S_AHB_CLK>;1447 clocks = <&mmcc HDMI_S_AHB_CLK>;
1455 clock-names = "slave_iface_clk";1448 clock-names = "slave_iface";
1456 #phy-cells = <0>;1449 #phy-cells = <0>;
1457 };1450 };
1458 1451
arch/arm/boot/dts/qcom-apq8084.dtsi+4−4
@@ -102,7 +102,7 @@ · 101 unmodified lines
102 };102 };
103 103
104 thermal-zones {104 thermal-zones {
105 cpu-thermal0 {105 cpu0-thermal {
106 polling-delay-passive = <250>;106 polling-delay-passive = <250>;
107 polling-delay = <1000>;107 polling-delay = <1000>;
108 108
@@ -122,7 +122,7 @@ · 13 unmodified lines
122 };122 };
123 };123 };
124 124
125 cpu-thermal1 {125 cpu1-thermal {
126 polling-delay-passive = <250>;126 polling-delay-passive = <250>;
127 polling-delay = <1000>;127 polling-delay = <1000>;
128 128
@@ -142,7 +142,7 @@ · 13 unmodified lines
142 };142 };
143 };143 };
144 144
145 cpu-thermal2 {145 cpu2-thermal {
146 polling-delay-passive = <250>;146 polling-delay-passive = <250>;
147 polling-delay = <1000>;147 polling-delay = <1000>;
148 148
@@ -162,7 +162,7 @@ · 13 unmodified lines
162 };162 };
163 };163 };
164 164
165 cpu-thermal3 {165 cpu3-thermal {
166 polling-delay-passive = <250>;166 polling-delay-passive = <250>;
167 polling-delay = <1000>;167 polling-delay = <1000>;
168 168
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts+1−1
@@ -18,5 +18,5 @@ · 17 unmodified lines
18 18
19/ {19/ {
20 model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";20 model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
21 21 compatible = "qcom,ipq4019-ap-dk01.1-c1", "qcom,ipq4019";
22};22};
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi+0−1
@@ -18,7 +18,6 @@ · 17 unmodified lines
18 18
19/ {19/ {
20 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";20 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
21 compatible = "qcom,ipq4019";
22 21
23 aliases {22 aliases {
24 serial0 = &blsp1_uart1;23 serial0 = &blsp1_uart1;
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts+1−1
@@ -5,7 +5,7 @@ · 4 unmodified lines
5 5
6/ {6/ {
7 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1";7 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1";
8 compatible = "qcom,ipq4019-dk04.1-c1";8 compatible = "qcom,ipq4019-dk04.1-c1", "qcom,ipq4019";
9 9
10 soc {10 soc {
11 dma@7984000 {11 dma@7984000 {
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts+1−1
@@ -5,5 +5,5 @@ · 4 unmodified lines
5 5
6/ {6/ {
7 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3";7 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3";
8 compatible = "qcom,ipq4019-ap-dk04.1-c3";8 compatible = "qcom,ipq4019-ap-dk04.1-c3", "qcom,ipq4019";
9};9};
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts+1−1
@@ -5,7 +5,7 @@ · 4 unmodified lines
5 5
6/ {6/ {
7 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";7 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
8 compatible = "qcom,ipq4019-ap-dk07.1-c1";8 compatible = "qcom,ipq4019-ap-dk07.1-c1", "qcom,ipq4019";
9 9
10 soc {10 soc {
11 pci@40000000 {11 pci@40000000 {
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts+1−1
@@ -5,7 +5,7 @@ · 4 unmodified lines
5 5
6/ {6/ {
7 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C2";7 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C2";
8 compatible = "qcom,ipq4019-ap-dk07.1-c2";8 compatible = "qcom,ipq4019-ap-dk07.1-c2", "qcom,ipq4019";
9 9
10 soc {10 soc {
11 pinctrl@1000000 {11 pinctrl@1000000 {
arch/arm/boot/dts/qcom-ipq8064-ap148.dts+1−1
@@ -3,7 +3,7 @@ · 2 unmodified lines
3 3
4/ {4/ {
5 model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";5 model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
6 compatible = "qcom,ipq8064-ap148";6 compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
7 7
8 soc {8 soc {
9 pinmux@800000 {9 pinmux@800000 {
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts+4−4
@@ -19,12 +19,12 @@ · 18 unmodified lines
19 stdout-path = "serial0:115200n8";19 stdout-path = "serial0:115200n8";
20 };20 };
21 21
22 memory@0 {22 memory@42000000 {
23 reg = <0x42000000 0x3e000000>;23 reg = <0x42000000 0x3e000000>;
24 device_type = "memory";24 device_type = "memory";
25 };25 };
26 26
27 mdio0: mdio@0 {27 mdio0: mdio-0 {
28 status = "okay";28 status = "okay";
29 compatible = "virtual,mdio-gpio";29 compatible = "virtual,mdio-gpio";
30 gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,30 gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
@@ -91,7 +91,7 @@ · 60 unmodified lines
91 };91 };
92 };92 };
93 93
94 mdio1: mdio@1 {94 mdio1: mdio-1 {
95 status = "okay";95 status = "okay";
96 compatible = "virtual,mdio-gpio";96 compatible = "virtual,mdio-gpio";
97 gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,97 gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
@@ -172,7 +172,7 @@ · 74 unmodified lines
172 172
173 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;173 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
174 174
175 norflash: s25fl016k@0 {175 norflash: flash@0 {
176 compatible = "jedec,spi-nor";176 compatible = "jedec,spi-nor";
177 #address-cells = <1>;177 #address-cells = <1>;
178 #size-cells = <1>;178 #size-cells = <1>;
arch/arm/boot/dts/qcom-ipq8064.dtsi+13−13
@@ -49,7 +49,7 @@ · 48 unmodified lines
49 };49 };
50 50
51 thermal-zones {51 thermal-zones {
52 tsens_tz_sensor0 {52 sensor0-thermal {
53 polling-delay-passive = <0>;53 polling-delay-passive = <0>;
54 polling-delay = <0>;54 polling-delay = <0>;
55 thermal-sensors = <&tsens 0>;55 thermal-sensors = <&tsens 0>;
@@ -69,7 +69,7 @@ · 13 unmodified lines
69 };69 };
70 };70 };
71 71
72 tsens_tz_sensor1 {72 sensor1-thermal {
73 polling-delay-passive = <0>;73 polling-delay-passive = <0>;
74 polling-delay = <0>;74 polling-delay = <0>;
75 thermal-sensors = <&tsens 1>;75 thermal-sensors = <&tsens 1>;
@@ -89,7 +89,7 @@ · 13 unmodified lines
89 };89 };
90 };90 };
91 91
92 tsens_tz_sensor2 {92 sensor2-thermal {
93 polling-delay-passive = <0>;93 polling-delay-passive = <0>;
94 polling-delay = <0>;94 polling-delay = <0>;
95 thermal-sensors = <&tsens 2>;95 thermal-sensors = <&tsens 2>;
@@ -109,7 +109,7 @@ · 13 unmodified lines
109 };109 };
110 };110 };
111 111
112 tsens_tz_sensor3 {112 sensor3-thermal {
113 polling-delay-passive = <0>;113 polling-delay-passive = <0>;
114 polling-delay = <0>;114 polling-delay = <0>;
115 thermal-sensors = <&tsens 3>;115 thermal-sensors = <&tsens 3>;
@@ -129,7 +129,7 @@ · 13 unmodified lines
129 };129 };
130 };130 };
131 131
132 tsens_tz_sensor4 {132 sensor4-thermal {
133 polling-delay-passive = <0>;133 polling-delay-passive = <0>;
134 polling-delay = <0>;134 polling-delay = <0>;
135 thermal-sensors = <&tsens 4>;135 thermal-sensors = <&tsens 4>;
@@ -149,7 +149,7 @@ · 13 unmodified lines
149 };149 };
150 };150 };
151 151
152 tsens_tz_sensor5 {152 sensor5-thermal {
153 polling-delay-passive = <0>;153 polling-delay-passive = <0>;
154 polling-delay = <0>;154 polling-delay = <0>;
155 thermal-sensors = <&tsens 5>;155 thermal-sensors = <&tsens 5>;
@@ -169,7 +169,7 @@ · 13 unmodified lines
169 };169 };
170 };170 };
171 171
172 tsens_tz_sensor6 {172 sensor6-thermal {
173 polling-delay-passive = <0>;173 polling-delay-passive = <0>;
174 polling-delay = <0>;174 polling-delay = <0>;
175 thermal-sensors = <&tsens 6>;175 thermal-sensors = <&tsens 6>;
@@ -189,7 +189,7 @@ · 13 unmodified lines
189 };189 };
190 };190 };
191 191
192 tsens_tz_sensor7 {192 sensor7-thermal {
193 polling-delay-passive = <0>;193 polling-delay-passive = <0>;
194 polling-delay = <0>;194 polling-delay = <0>;
195 thermal-sensors = <&tsens 7>;195 thermal-sensors = <&tsens 7>;
@@ -209,7 +209,7 @@ · 13 unmodified lines
209 };209 };
210 };210 };
211 211
212 tsens_tz_sensor8 {212 sensor8-thermal {
213 polling-delay-passive = <0>;213 polling-delay-passive = <0>;
214 polling-delay = <0>;214 polling-delay = <0>;
215 thermal-sensors = <&tsens 8>;215 thermal-sensors = <&tsens 8>;
@@ -229,7 +229,7 @@ · 13 unmodified lines
229 };229 };
230 };230 };
231 231
232 tsens_tz_sensor9 {232 sensor9-thermal {
233 polling-delay-passive = <0>;233 polling-delay-passive = <0>;
234 polling-delay = <0>;234 polling-delay = <0>;
235 thermal-sensors = <&tsens 9>;235 thermal-sensors = <&tsens 9>;
@@ -249,7 +249,7 @@ · 13 unmodified lines
249 };249 };
250 };250 };
251 251
252 tsens_tz_sensor10 {252 sensor10-thermal {
253 polling-delay-passive = <0>;253 polling-delay-passive = <0>;
254 polling-delay = <0>;254 polling-delay = <0>;
255 thermal-sensors = <&tsens 10>;255 thermal-sensors = <&tsens 10>;
@@ -1181,7 +1181,7 @@ · 925 unmodified lines
1181 #size-cells = <1>;1181 #size-cells = <1>;
1182 ranges;1182 ranges;
1183 1183
1184 sdcc1: sdcc@12400000 {1184 sdcc1: mmc@12400000 {
1185 status = "disabled";1185 status = "disabled";
1186 compatible = "arm,pl18x", "arm,primecell";1186 compatible = "arm,pl18x", "arm,primecell";
1187 arm,primecell-periphid = <0x00051180>;1187 arm,primecell-periphid = <0x00051180>;
@@ -1201,7 +1201,7 @@ · 13 unmodified lines
1201 dma-names = "tx", "rx";1201 dma-names = "tx", "rx";
1202 };1202 };
1203 1203
1204 sdcc3: sdcc@12180000 {1204 sdcc3: mmc@12180000 {
1205 compatible = "arm,pl18x", "arm,primecell";1205 compatible = "arm,pl18x", "arm,primecell";
1206 arm,primecell-periphid = <0x00051180>;1206 arm,primecell-periphid = <0x00051180>;
1207 status = "disabled";1207 status = "disabled";
arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi+1−1
@@ -49,7 +49,7 @@ · 48 unmodified lines
49 model = "Sierra Wireless WP8548 Module";49 model = "Sierra Wireless WP8548 Module";
50 compatible = "swir,wp8548", "qcom,mdm9615";50 compatible = "swir,wp8548", "qcom,mdm9615";
51 51
52 memory {52 memory@48000000 {
53 device_type = "memory";53 device_type = "memory";
54 reg = <0x48000000 0x7F00000>;54 reg = <0x48000000 0x7F00000>;
55 };55 };
arch/arm/boot/dts/qcom-mdm9615.dtsi+6−10
@@ -300,18 +300,14 @@ · 299 unmodified lines
300 pull-up;300 pull-up;
301 };301 };
302 302
303 pmicmpp: mpp@50 {303 pmicmpp: mpps@50 {
304 compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";304 compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
305 interrupt-parent = <&pmicintc>;305 interrupt-controller;
306 interrupts = <24 IRQ_TYPE_NONE>,306 #interrupt-cells = <2>;
307 <25 IRQ_TYPE_NONE>,
308 <26 IRQ_TYPE_NONE>,
309 <27 IRQ_TYPE_NONE>,
310 <28 IRQ_TYPE_NONE>,
311 <29 IRQ_TYPE_NONE>;
312 reg = <0x50>;307 reg = <0x50>;
313 gpio-controller;308 gpio-controller;
314 #gpio-cells = <2>;309 #gpio-cells = <2>;
310 gpio-ranges = <&pmicmpp 0 0 6>;
315 };311 };
316 312
317 rtc@11d {313 rtc@11d {
@@ -358,7 +354,7 @@ · 40 unmodified lines
358 #address-cells = <1>;354 #address-cells = <1>;
359 #size-cells = <1>;355 #size-cells = <1>;
360 ranges;356 ranges;
361 sdcc1: sdcc@12180000 {357 sdcc1: mmc@12180000 {
362 status = "disabled";358 status = "disabled";
363 compatible = "arm,pl18x", "arm,primecell";359 compatible = "arm,pl18x", "arm,primecell";
364 arm,primecell-periphid = <0x00051180>;360 arm,primecell-periphid = <0x00051180>;
@@ -378,7 +374,7 @@ · 13 unmodified lines
378 assigned-clock-rates = <400000>;374 assigned-clock-rates = <400000>;
379 };375 };
380 376
381 sdcc2: sdcc@12140000 {377 sdcc2: mmc@12140000 {
382 compatible = "arm,pl18x", "arm,primecell";378 compatible = "arm,pl18x", "arm,primecell";
383 arm,primecell-periphid = <0x00051180>;379 arm,primecell-periphid = <0x00051180>;
384 status = "disabled";380 status = "disabled";
arch/arm/boot/dts/qcom-msm8226.dtsi+255−8
@@ -7,6 +7,7 @@ · 6 unmodified lines
7 7
8#include <dt-bindings/interrupt-controller/arm-gic.h>8#include <dt-bindings/interrupt-controller/arm-gic.h>
9#include <dt-bindings/clock/qcom,gcc-msm8974.h>9#include <dt-bindings/clock/qcom,gcc-msm8974.h>
10#include <dt-bindings/gpio/gpio.h>
10 11
11/ {12/ {
12 #address-cells = <1>;13 #address-cells = <1>;
@@ -20,6 +21,70 @@ · 7 unmodified lines
20 reg = <0x0 0x0>;21 reg = <0x0 0x0>;
21 };22 };
22 23
24 clocks {
25 xo_board: xo_board {
26 compatible = "fixed-clock";
27 #clock-cells = <0>;
28 clock-frequency = <19200000>;
29 };
30
31 sleep_clk: sleep_clk {
32 compatible = "fixed-clock";
33 #clock-cells = <0>;
34 clock-frequency = <32768>;
35 };
36 };
37
38 firmware {
39 scm {
40 compatible = "qcom,scm-msm8226", "qcom,scm";
41 clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
42 clock-names = "core", "bus", "iface";
43 };
44 };
45
46 tcsr_mutex: hwlock {
47 compatible = "qcom,tcsr-mutex";
48 syscon = <&tcsr_mutex_block 0 0x80>;
49
50 #hwlock-cells = <1>;
51 };
52
53 reserved-memory {
54 #address-cells = <1>;
55 #size-cells = <1>;
56 ranges;
57
58 smem_region: smem@3000000 {
59 reg = <0x3000000 0x100000>;
60 no-map;
61 };
62 };
63
64 smd {
65 compatible = "qcom,smd";
66
67 rpm {
68 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
69 qcom,ipc = <&apcs 8 0>;
70 qcom,smd-edge = <15>;
71
72 rpm_requests: rpm-requests {
73 compatible = "qcom,rpm-msm8226";
74 qcom,smd-channels = "rpm_requests";
75 };
76 };
77 };
78
79 smem {
80 compatible = "qcom,smem";
81
82 memory-region = <&smem_region>;
83 qcom,rpm-msg-ram = <&rpm_msg_ram>;
84
85 hwlocks = <&tcsr_mutex 3>;
86 };
87
23 soc: soc {88 soc: soc {
24 compatible = "simple-bus";89 compatible = "simple-bus";
25 #address-cells = <1>;90 #address-cells = <1>;
@@ -34,6 +99,136 @@ · 8 unmodified lines
34 #interrupt-cells = <3>;99 #interrupt-cells = <3>;
35 };100 };
36 101
102 apcs: syscon@f9011000 {
103 compatible = "syscon";
104 reg = <0xf9011000 0x1000>;
105 };
106
107 sdhc_1: sdhci@f9824900 {
108 compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
109 reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
110 reg-names = "hc_mem", "core_mem";
111 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
112 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
113 interrupt-names = "hc_irq", "pwr_irq";
114 clocks = <&gcc GCC_SDCC1_APPS_CLK>,
115 <&gcc GCC_SDCC1_AHB_CLK>,
116 <&xo_board>;
117 clock-names = "core", "iface", "xo";
118 status = "disabled";
119 };
120
121 sdhc_2: sdhci@f98a4900 {
122 compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
123 reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
124 reg-names = "hc_mem", "core_mem";
125 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
126 <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
127 interrupt-names = "hc_irq", "pwr_irq";
128 clocks = <&gcc GCC_SDCC2_APPS_CLK>,
129 <&gcc GCC_SDCC2_AHB_CLK>,
130 <&xo_board>;
131 clock-names = "core", "iface", "xo";
132 status = "disabled";
133 };
134
135 sdhc_3: sdhci@f9864900 {
136 compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
137 reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
138 reg-names = "hc_mem", "core_mem";
139 interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
140 <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
141 interrupt-names = "hc_irq", "pwr_irq";
142 clocks = <&gcc GCC_SDCC3_APPS_CLK>,
143 <&gcc GCC_SDCC3_AHB_CLK>,
144 <&xo_board>;
145 clock-names = "core", "iface", "xo";
146 status = "disabled";
147 };
148
149 blsp1_uart3: serial@f991f000 {
150 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
151 reg = <0xf991f000 0x1000>;
152 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
153 clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
154 clock-names = "core", "iface";
155 status = "disabled";
156 };
157
158 blsp1_uart4: serial@f9920000 {
159 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
160 reg = <0xf9920000 0x1000>;
161 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
162 clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
163 clock-names = "core", "iface";
164 status = "disabled";
165 };
166
167 blsp1_i2c1: i2c@f9923000 {
168 status = "disabled";
169 compatible = "qcom,i2c-qup-v2.1.1";
170 reg = <0xf9923000 0x1000>;
171 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
172 clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
173 clock-names = "core", "iface";
174 pinctrl-names = "default";
175 pinctrl-0 = <&blsp1_i2c1_pins>;
176 #address-cells = <1>;
177 #size-cells = <0>;
178 };
179
180 blsp1_i2c2: i2c@f9924000 {
181 status = "disabled";
182 compatible = "qcom,i2c-qup-v2.1.1";
183 reg = <0xf9924000 0x1000>;
184 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
185 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
186 clock-names = "core", "iface";
187 pinctrl-names = "default";
188 pinctrl-0 = <&blsp1_i2c2_pins>;
189 #address-cells = <1>;
190 #size-cells = <0>;
191 };
192
193 blsp1_i2c3: i2c@f9925000 {
194 status = "disabled";
195 compatible = "qcom,i2c-qup-v2.1.1";
196 reg = <0xf9925000 0x1000>;
197 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
198 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
199 clock-names = "core", "iface";
200 pinctrl-names = "default";
201 pinctrl-0 = <&blsp1_i2c3_pins>;
202 #address-cells = <1>;
203 #size-cells = <0>;
204 };
205
206 blsp1_i2c4: i2c@f9926000 {
207 status = "disabled";
208 compatible = "qcom,i2c-qup-v2.1.1";
209 reg = <0xf9926000 0x1000>;
210 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
211 clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
212 clock-names = "core", "iface";
213 pinctrl-names = "default";
214 pinctrl-0 = <&blsp1_i2c4_pins>;
215 #address-cells = <1>;
216 #size-cells = <0>;
217 };
218
219 blsp1_i2c5: i2c@f9927000 {
220 status = "disabled";
221 compatible = "qcom,i2c-qup-v2.1.1";
222 reg = <0xf9927000 0x1000>;
223 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
224 clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
225 clock-names = "core", "iface";
226 pinctrl-names = "default";
227 pinctrl-0 = <&blsp1_i2c5_pins>;
228 #address-cells = <1>;
229 #size-cells = <0>;
230 };
231
37 gcc: clock-controller@fc400000 {232 gcc: clock-controller@fc400000 {
38 compatible = "qcom,gcc-msm8226";233 compatible = "qcom,gcc-msm8226";
39 reg = <0xfc400000 0x4000>;234 reg = <0xfc400000 0x4000>;
@@ -51,15 +246,41 @@ · 11 unmodified lines
51 interrupt-controller;246 interrupt-controller;
52 #interrupt-cells = <2>;247 #interrupt-cells = <2>;
53 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;248 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
54 };
55 249
56 blsp1_uart3: serial@f991f000 {250 blsp1_i2c1_pins: blsp1-i2c1 {
57 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";251 pins = "gpio2", "gpio3";
58 reg = <0xf991f000 0x1000>;252 function = "blsp_i2c1";
59 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;253 drive-strength = <2>;
60 clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;254 bias-disable;
61 clock-names = "core", "iface";255 };
62 status = "disabled";256
257 blsp1_i2c2_pins: blsp1-i2c2 {
258 pins = "gpio6", "gpio7";
259 function = "blsp_i2c2";
260 drive-strength = <2>;
261 bias-disable;
262 };
263
264 blsp1_i2c3_pins: blsp1-i2c3 {
265 pins = "gpio10", "gpio11";
266 function = "blsp_i2c3";
267 drive-strength = <2>;
268 bias-disable;
269 };
270
271 blsp1_i2c4_pins: blsp1-i2c4 {
272 pins = "gpio14", "gpio15";
273 function = "blsp_i2c4";
274 drive-strength = <2>;
275 bias-disable;
276 };
277
278 blsp1_i2c5_pins: blsp1-i2c5 {
279 pins = "gpio18", "gpio19";
280 function = "blsp_i2c5";
281 drive-strength = <2>;
282 bias-disable;
283 };
63 };284 };
64 285
65 restart@fc4ab000 {286 restart@fc4ab000 {
@@ -67,6 +288,22 @@ · 1 unmodified line
67 reg = <0xfc4ab000 0x4>;288 reg = <0xfc4ab000 0x4>;
68 };289 };
69 290
291 spmi_bus: spmi@fc4cf000 {
292 compatible = "qcom,spmi-pmic-arb";
293 reg-names = "core", "intr", "cnfg";
294 reg = <0xfc4cf000 0x1000>,
295 <0xfc4cb000 0x1000>,
296 <0xfc4ca000 0x1000>;
297 interrupt-names = "periph_irq";
298 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
299 qcom,ee = <0>;
300 qcom,channel = <0>;
301 #address-cells = <2>;
302 #size-cells = <0>;
303 interrupt-controller;
304 #interrupt-cells = <4>;
305 };
306
70 rng@f9bff000 {307 rng@f9bff000 {
71 compatible = "qcom,prng";308 compatible = "qcom,prng";
72 reg = <0xf9bff000 0x200>;309 reg = <0xf9bff000 0x200>;
@@ -131,6 +368,16 @@ · 58 unmodified lines
131 status = "disabled";368 status = "disabled";
132 };369 };
133 };370 };
371
372 rpm_msg_ram: memory@fc428000 {
373 compatible = "qcom,rpm-msg-ram";
374 reg = <0xfc428000 0x4000>;
375 };
376
377 tcsr_mutex_block: syscon@fd484000 {
378 compatible = "syscon";
379 reg = <0xfd484000 0x2000>;
380 };
134 };381 };
135 382
136 timer {383 timer {
arch/arm/boot/dts/qcom-msm8660-surf.dts+2−2
@@ -35,13 +35,13 @@ · 34 unmodified lines
35 35
36 amba {36 amba {
37 /* eMMC */37 /* eMMC */
38 sdcc1: sdcc@12400000 {38 sdcc1: mmc@12400000 {
39 status = "okay";39 status = "okay";
40 vmmc-supply = <&vsdcc_fixed>;40 vmmc-supply = <&vsdcc_fixed>;
41 };41 };
42 42
43 /* External micro SD card */43 /* External micro SD card */
44 sdcc3: sdcc@12180000 {44 sdcc3: mmc@12180000 {
45 status = "okay";45 status = "okay";
46 vmmc-supply = <&vsdcc_fixed>;46 vmmc-supply = <&vsdcc_fixed>;
47 };47 };
arch/arm/boot/dts/qcom-msm8660.dtsi+8−19
@@ -307,20 +307,9 @@ · 306 unmodified lines
307 reg = <0x50>;307 reg = <0x50>;
308 gpio-controller;308 gpio-controller;
309 #gpio-cells = <2>;309 #gpio-cells = <2>;
310 interrupt-parent = <&pm8058>;310 gpio-ranges = <&pm8058_mpps 0 0 12>;
311 interrupts =311 interrupt-controller;
312 <128 IRQ_TYPE_NONE>,312 #interrupt-cells = <2>;
313 <129 IRQ_TYPE_NONE>,
314 <130 IRQ_TYPE_NONE>,
315 <131 IRQ_TYPE_NONE>,
316 <132 IRQ_TYPE_NONE>,
317 <133 IRQ_TYPE_NONE>,
318 <134 IRQ_TYPE_NONE>,
319 <135 IRQ_TYPE_NONE>,
320 <136 IRQ_TYPE_NONE>,
321 <137 IRQ_TYPE_NONE>,
322 <138 IRQ_TYPE_NONE>,
323 <139 IRQ_TYPE_NONE>;
324 };313 };
325 314
326 pwrkey@1c {315 pwrkey@1c {
@@ -494,7 +483,7 @@ · 167 unmodified lines
494 #address-cells = <1>;483 #address-cells = <1>;
495 #size-cells = <1>;484 #size-cells = <1>;
496 ranges;485 ranges;
497 sdcc1: sdcc@12400000 {486 sdcc1: mmc@12400000 {
498 status = "disabled";487 status = "disabled";
499 compatible = "arm,pl18x", "arm,primecell";488 compatible = "arm,pl18x", "arm,primecell";
500 arm,primecell-periphid = <0x00051180>;489 arm,primecell-periphid = <0x00051180>;
@@ -510,7 +499,7 @@ · 9 unmodified lines
510 cap-mmc-highspeed;499 cap-mmc-highspeed;
511 };500 };
512 501
513 sdcc2: sdcc@12140000 {502 sdcc2: mmc@12140000 {
514 status = "disabled";503 status = "disabled";
515 compatible = "arm,pl18x", "arm,primecell";504 compatible = "arm,pl18x", "arm,primecell";
516 arm,primecell-periphid = <0x00051180>;505 arm,primecell-periphid = <0x00051180>;
@@ -525,7 +514,7 @@ · 8 unmodified lines
525 cap-mmc-highspeed;514 cap-mmc-highspeed;
526 };515 };
527 516
528 sdcc3: sdcc@12180000 {517 sdcc3: mmc@12180000 {
529 compatible = "arm,pl18x", "arm,primecell";518 compatible = "arm,pl18x", "arm,primecell";
530 arm,primecell-periphid = <0x00051180>;519 arm,primecell-periphid = <0x00051180>;
531 status = "disabled";520 status = "disabled";
@@ -541,7 +530,7 @@ · 9 unmodified lines
541 no-1-8-v;530 no-1-8-v;
542 };531 };
543 532
544 sdcc4: sdcc@121c0000 {533 sdcc4: mmc@121c0000 {
545 compatible = "arm,pl18x", "arm,primecell";534 compatible = "arm,pl18x", "arm,primecell";
546 arm,primecell-periphid = <0x00051180>;535 arm,primecell-periphid = <0x00051180>;
547 status = "disabled";536 status = "disabled";
@@ -556,7 +545,7 @@ · 8 unmodified lines
556 cap-mmc-highspeed;545 cap-mmc-highspeed;
557 };546 };
558 547
559 sdcc5: sdcc@12200000 {548 sdcc5: mmc@12200000 {
560 compatible = "arm,pl18x", "arm,primecell";549 compatible = "arm,pl18x", "arm,primecell";
561 arm,primecell-periphid = <0x00051180>;550 arm,primecell-periphid = <0x00051180>;
562 status = "disabled";551 status = "disabled";
arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts+3−0
@@ -0,0 +1,3 @@
1// SPDX-License-Identifier: GPL-2.0-only
2#include "arm64/qcom/msm8916-samsung-serranove.dts"
3#include "qcom-msm8916-smp.dtsi"
arch/arm/boot/dts/qcom-msm8916-smp.dtsi+62−0
@@ -0,0 +1,62 @@
1// SPDX-License-Identifier: GPL-2.0-only
2
3/ {
4 cpus {
5 cpu@0 {
6 enable-method = "qcom,msm8916-smp";
7 };
8 cpu@1 {
9 enable-method = "qcom,msm8916-smp";
10 };
11 cpu@2 {
12 enable-method = "qcom,msm8916-smp";
13 };
14 cpu@3 {
15 enable-method = "qcom,msm8916-smp";
16 };
17
18 idle-states {
19 /delete-property/ entry-method;
20 };
21 };
22
23 psci {
24 status = "disabled";
25 };
26};
27
28&CPU_SLEEP_0 {
29 compatible = "qcom,idle-state-spc";
30};
31
32&cpu0_acc {
33 status = "okay";
34};
35
36&cpu0_saw {
37 status = "okay";
38};
39
40&cpu1_acc {
41 status = "okay";
42};
43
44&cpu1_saw {
45 status = "okay";
46};
47
48&cpu2_acc {
49 status = "okay";
50};
51
52&cpu2_saw {
53 status = "okay";
54};
55
56&cpu3_acc {
57 status = "okay";
58};
59
60&cpu3_saw {
61 status = "okay";
62};
arch/arm/boot/dts/qcom-msm8960-cdp.dts+2−2
@@ -26,12 +26,12 @@ · 25 unmodified lines
26 26
27 amba {27 amba {
28 /* eMMC */28 /* eMMC */
29 sdcc1: sdcc@12400000 {29 sdcc1: mmc@12400000 {
30 status = "okay";30 status = "okay";
31 };31 };
32 32
33 /* External micro SD card */33 /* External micro SD card */
34 sdcc3: sdcc@12180000 {34 sdcc3: mmc@12180000 {
35 status = "okay";35 status = "okay";
36 };36 };
37 };37 };
arch/arm/boot/dts/qcom-msm8960.dtsi+2−2
@@ -263,7 +263,7 @@ · 262 unmodified lines
263 #address-cells = <1>;263 #address-cells = <1>;
264 #size-cells = <1>;264 #size-cells = <1>;
265 ranges;265 ranges;
266 sdcc1: sdcc@12400000 {266 sdcc1: mmc@12400000 {
267 status = "disabled";267 status = "disabled";
268 compatible = "arm,pl18x", "arm,primecell";268 compatible = "arm,pl18x", "arm,primecell";
269 arm,primecell-periphid = <0x00051180>;269 arm,primecell-periphid = <0x00051180>;
@@ -280,7 +280,7 @@ · 10 unmodified lines
280 vmmc-supply = <&vsdcc_fixed>;280 vmmc-supply = <&vsdcc_fixed>;
281 };281 };
282 282
283 sdcc3: sdcc@12180000 {283 sdcc3: mmc@12180000 {
284 compatible = "arm,pl18x", "arm,primecell";284 compatible = "arm,pl18x", "arm,primecell";
285 arm,primecell-periphid = <0x00051180>;285 arm,primecell-periphid = <0x00051180>;
286 status = "disabled";286 status = "disabled";
arch/arm/boot/dts/qcom-msm8974.dtsi+8−8
@@ -142,7 +142,7 @@ · 141 unmodified lines
142 };142 };
143 143
144 thermal-zones {144 thermal-zones {
145 cpu-thermal0 {145 cpu0-thermal {
146 polling-delay-passive = <250>;146 polling-delay-passive = <250>;
147 polling-delay = <1000>;147 polling-delay = <1000>;
148 148
@@ -162,7 +162,7 @@ · 13 unmodified lines
162 };162 };
163 };163 };
164 164
165 cpu-thermal1 {165 cpu1-thermal {
166 polling-delay-passive = <250>;166 polling-delay-passive = <250>;
167 polling-delay = <1000>;167 polling-delay = <1000>;
168 168
@@ -182,7 +182,7 @@ · 13 unmodified lines
182 };182 };
183 };183 };
184 184
185 cpu-thermal2 {185 cpu2-thermal {
186 polling-delay-passive = <250>;186 polling-delay-passive = <250>;
187 polling-delay = <1000>;187 polling-delay = <1000>;
188 188
@@ -202,7 +202,7 @@ · 13 unmodified lines
202 };202 };
203 };203 };
204 204
205 cpu-thermal3 {205 cpu3-thermal {
206 polling-delay-passive = <250>;206 polling-delay-passive = <250>;
207 polling-delay = <1000>;207 polling-delay = <1000>;
208 208
@@ -282,7 +282,7 @@ · 73 unmodified lines
282 };282 };
283 };283 };
284 284
285 gpu-thermal-top {285 gpu-top-thermal {
286 polling-delay-passive = <250>;286 polling-delay-passive = <250>;
287 polling-delay = <1000>;287 polling-delay = <1000>;
288 288
@@ -297,7 +297,7 @@ · 8 unmodified lines
297 };297 };
298 };298 };
299 299
300 gpu-thermal-bottom {300 gpu-bottom-thermal {
301 polling-delay-passive = <250>;301 polling-delay-passive = <250>;
302 polling-delay = <1000>;302 polling-delay = <1000>;
303 303
@@ -1589,8 +1589,8 @@ · 1285 unmodified lines
1589 #phy-cells = <0>;1589 #phy-cells = <0>;
1590 qcom,dsi-phy-index = <0>;1590 qcom,dsi-phy-index = <0>;
1591 1591
1592 clocks = <&mmcc MDSS_AHB_CLK>;1592 clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
1593 clock-names = "iface";1593 clock-names = "iface", "ref";
1594 };1594 };
1595 };1595 };
1596 1596
arch/arm/boot/dts/qcom-pm8226.dtsi+27−0
@@ -0,0 +1,27 @@
1// SPDX-License-Identifier: BSD-3-Clause
2#include <dt-bindings/interrupt-controller/irq.h>
3#include <dt-bindings/spmi/spmi.h>
4
5&spmi_bus {
6 pm8226_0: pm8226@0 {
7 compatible = "qcom,pm8226", "qcom,spmi-pmic";
8 reg = <0x0 SPMI_USID>;
9 #address-cells = <1>;
10 #size-cells = <0>;
11
12 pwrkey@800 {
13 compatible = "qcom,pm8941-pwrkey";
14 reg = <0x800>;
15 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
16 debounce = <15625>;
17 bias-pull-up;
18 };
19 };
20
21 pm8226_1: pm8226@1 {
22 compatible = "qcom,pm8226", "qcom,spmi-pmic";
23 reg = <0x1 SPMI_USID>;
24 #address-cells = <1>;
25 #size-cells = <0>;
26 };
27};
arch/arm/boot/dts/qcom-pm8841.dtsi+3−4
@@ -15,10 +15,9 @@ · 14 unmodified lines
15 reg = <0xa000>;15 reg = <0xa000>;
16 gpio-controller;16 gpio-controller;
17 #gpio-cells = <2>;17 #gpio-cells = <2>;
18 interrupts = <4 0xa0 0 IRQ_TYPE_NONE>,18 gpio-ranges = <&pm8841_mpps 0 0 4>;
19 <4 0xa1 0 IRQ_TYPE_NONE>,19 interrupt-controller;
20 <4 0xa2 0 IRQ_TYPE_NONE>,20 #interrupt-cells = <2>;
21 <4 0xa3 0 IRQ_TYPE_NONE>;
22 };21 };
23 22
24 temp-alarm@2400 {23 temp-alarm@2400 {
arch/arm/boot/dts/qcom-pm8941.dtsi+3−8
@@ -79,14 +79,9 @@ · 78 unmodified lines
79 reg = <0xa000>;79 reg = <0xa000>;
80 gpio-controller;80 gpio-controller;
81 #gpio-cells = <2>;81 #gpio-cells = <2>;
82 interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,82 gpio-ranges = <&pm8941_mpps 0 0 8>;
83 <0 0xa1 0 IRQ_TYPE_NONE>,83 interrupt-controller;
84 <0 0xa2 0 IRQ_TYPE_NONE>,84 #interrupt-cells = <2>;
85 <0 0xa3 0 IRQ_TYPE_NONE>,
86 <0 0xa4 0 IRQ_TYPE_NONE>,
87 <0 0xa5 0 IRQ_TYPE_NONE>,
88 <0 0xa6 0 IRQ_TYPE_NONE>,
89 <0 0xa7 0 IRQ_TYPE_NONE>;
90 };85 };
91 86
92 pm8941_temp: temp-alarm@2400 {87 pm8941_temp: temp-alarm@2400 {
arch/arm/boot/dts/qcom-pma8084.dtsi+3−8
@@ -42,14 +42,9 @@ · 41 unmodified lines
42 reg = <0xa000>;42 reg = <0xa000>;
43 gpio-controller;43 gpio-controller;
44 #gpio-cells = <2>;44 #gpio-cells = <2>;
45 interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,45 gpio-ranges = <&pma8084_mpps 0 0 8>;
46 <0 0xa1 0 IRQ_TYPE_NONE>,46 interrupt-controller;
47 <0 0xa2 0 IRQ_TYPE_NONE>,47 #interrupt-cells = <2>;
48 <0 0xa3 0 IRQ_TYPE_NONE>,
49 <0 0xa4 0 IRQ_TYPE_NONE>,
50 <0 0xa5 0 IRQ_TYPE_NONE>,
51 <0 0xa6 0 IRQ_TYPE_NONE>,
52 <0 0xa7 0 IRQ_TYPE_NONE>;
53 };48 };
54 49
55 pma8084_temp: temp-alarm@2400 {50 pma8084_temp: temp-alarm@2400 {
arch/arm/boot/dts/qcom-sdx55.dtsi+0−1
@@ -228,7 +228,6 @@ · 227 unmodified lines
228 compatible = "qcom,sdx55-qmp-usb3-uni-phy";228 compatible = "qcom,sdx55-qmp-usb3-uni-phy";
229 reg = <0x00ff6000 0x1c0>;229 reg = <0x00ff6000 0x1c0>;
230 status = "disabled";230 status = "disabled";
231 #clock-cells = <1>;
232 #address-cells = <1>;231 #address-cells = <1>;
233 #size-cells = <1>;232 #size-cells = <1>;
234 ranges;233 ranges;
arch/arm/boot/dts/r7s72100-genmai.dts+2−0
@@ -108,6 +108,8 @@ · 107 unmodified lines
108 renesas,no-ether-link;108 renesas,no-ether-link;
109 phy-handle = <&phy0>;109 phy-handle = <&phy0>;
110 phy0: ethernet-phy@0 {110 phy0: ethernet-phy@0 {
111 compatible = "ethernet-phy-idb824.2814",
112 "ethernet-phy-ieee802.3-c22";
111 reg = <0>;113 reg = <0>;
112 };114 };
113};115};
arch/arm/boot/dts/r7s72100-gr-peach.dts+2−0
@@ -129,6 +129,8 @@ · 128 unmodified lines
129 phy-handle = <&phy0>;129 phy-handle = <&phy0>;
130 130
131 phy0: ethernet-phy@0 {131 phy0: ethernet-phy@0 {
132 compatible = "ethernet-phy-id0007.c0f0",
133 "ethernet-phy-ieee802.3-c22";
132 reg = <0>;134 reg = <0>;
133 135
134 reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;136 reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;
arch/arm/boot/dts/r7s72100-rskrza1.dts+2−0
@@ -192,6 +192,8 @@ · 191 unmodified lines
192 renesas,no-ether-link;192 renesas,no-ether-link;
193 phy-handle = <&phy0>;193 phy-handle = <&phy0>;
194 phy0: ethernet-phy@0 {194 phy0: ethernet-phy@0 {
195 compatible = "ethernet-phy-idb824.2814",
196 "ethernet-phy-ieee802.3-c22";
195 reg = <0>;197 reg = <0>;
196 };198 };
197};199};
arch/arm/boot/dts/r7s9210-rza2mevb.dts+21−0
@@ -100,6 +100,8 @@ · 99 unmodified lines
100 renesas,no-ether-link;100 renesas,no-ether-link;
101 phy-handle = <&phy1>;101 phy-handle = <&phy1>;
102 phy1: ethernet-phy@1 {102 phy1: ethernet-phy@1 {
103 compatible = "ethernet-phy-id001c.c816",
104 "ethernet-phy-ieee802.3-c22";
103 reg = <0>;105 reg = <0>;
104 };106 };
105};107};
@@ -109,6 +111,20 @@ · 3 unmodified lines
109 clock-frequency = <24000000>; /* 24MHz */111 clock-frequency = <24000000>; /* 24MHz */
110};112};
111 113
114&i2c3 {
115 status = "okay";
116 clock-frequency = <400000>;
117
118 pinctrl-names = "default";
119 pinctrl-0 = <&i2c3_pins>;
120
121 eeprom@50 {
122 compatible = "renesas,r1ex24128", "atmel,24c128";
123 reg = <0x50>;
124 pagesize = <64>;
125 };
126};
127
112/* High resolution System tick timers */128/* High resolution System tick timers */
113&ostm0 {129&ostm0 {
114 status = "okay";130 status = "okay";
@@ -147,6 +163,11 @@ · 32 unmodified lines
147 <RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */163 <RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */
148 };164 };
149 165
166 i2c3_pins: i2c3 {
167 pinmux = <RZA2_PINMUX(PORTD, 6, 1)>, /* RIIC3SCL */
168 <RZA2_PINMUX(PORTD, 7, 1)>; /* RIIC3SDA */
169 };
170
150 keyboard_pins: keyboard {171 keyboard_pins: keyboard {
151 pinmux = <RZA2_PINMUX(PORTJ, 1, 6)>; /* IRQ0 */172 pinmux = <RZA2_PINMUX(PORTJ, 1, 6)>; /* IRQ0 */
152 };173 };
arch/arm/boot/dts/r8a73a4-ape6evm.dts+1−0
@@ -199,6 +199,7 @@ · 198 unmodified lines
199 reg-io-width = <4>;199 reg-io-width = <4>;
200 smsc,irq-active-high;200 smsc,irq-active-high;
201 smsc,irq-push-pull;201 smsc,irq-push-pull;
202 reset-gpios = <&pfc 270 GPIO_ACTIVE_LOW>;
202 vdd33a-supply = <&ape6evm_fixed_3v3>;203 vdd33a-supply = <&ape6evm_fixed_3v3>;
203 vddvario-supply = <&ape6evm_fixed_1v8>;204 vddvario-supply = <&ape6evm_fixed_1v8>;
204 };205 };
arch/arm/boot/dts/r8a7740-armadillo800eva.dts+3−0
@@ -170,7 +170,10 @@ · 169 unmodified lines
170 status = "okay";170 status = "okay";
171 171
172 phy0: ethernet-phy@0 {172 phy0: ethernet-phy@0 {
173 compatible = "ethernet-phy-id0007.c0f1",
174 "ethernet-phy-ieee802.3-c22";
173 reg = <0>;175 reg = <0>;
176 reset-gpios = <&pfc 18 GPIO_ACTIVE_LOW>;
174 };177 };
175};178};
176 179
arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts+2−0
@@ -66,6 +66,8 @@ · 65 unmodified lines
66 status = "okay";66 status = "okay";
67 67
68 phy1: ethernet-phy@1 {68 phy1: ethernet-phy@1 {
69 compatible = "ethernet-phy-id0022.1560",
70 "ethernet-phy-ieee802.3-c22";
69 reg = <1>;71 reg = <1>;
70 micrel,led-mode = <1>;72 micrel,led-mode = <1>;
71 };73 };
arch/arm/boot/dts/r8a7742-iwg21d-q7.dts+2−0
@@ -175,6 +175,8 @@ · 174 unmodified lines
175 status = "okay";175 status = "okay";
176 176
177 phy3: ethernet-phy@3 {177 phy3: ethernet-phy@3 {
178 compatible = "ethernet-phy-id0022.1622",
179 "ethernet-phy-ieee802.3-c22";
178 reg = <3>;180 reg = <3>;
179 micrel,led-mode = <1>;181 micrel,led-mode = <1>;
180 };182 };
arch/arm/boot/dts/r8a7743-sk-rzg1m.dts+4−0
@@ -7,6 +7,7 @@ · 6 unmodified lines
7 7
8/dts-v1/;8/dts-v1/;
9#include "r8a7743.dtsi"9#include "r8a7743.dtsi"
10#include <dt-bindings/gpio/gpio.h>
10 11
11/ {12/ {
12 model = "SK-RZG1M";13 model = "SK-RZG1M";
@@ -69,9 +70,12 @@ · 56 unmodified lines
69 status = "okay";70 status = "okay";
70 71
71 phy1: ethernet-phy@1 {72 phy1: ethernet-phy@1 {
73 compatible = "ethernet-phy-id0022.1537",
74 "ethernet-phy-ieee802.3-c22";
72 reg = <1>;75 reg = <1>;
73 interrupt-parent = <&irqc>;76 interrupt-parent = <&irqc>;
74 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;77 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
75 micrel,led-mode = <1>;78 micrel,led-mode = <1>;
79 reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
76 };80 };
77};81};
arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts+2−0
@@ -123,6 +123,8 @@ · 122 unmodified lines
123 * On some older versions of the platform (before R4.0) the phy address123 * On some older versions of the platform (before R4.0) the phy address
124 * may be 1 or 3. The address is fixed to 3 for R4.0 onwards.124 * may be 1 or 3. The address is fixed to 3 for R4.0 onwards.
125 */125 */
126 compatible = "ethernet-phy-id0022.1622",
127 "ethernet-phy-ieee802.3-c22";
126 reg = <3>;128 reg = <3>;
127 micrel,led-mode = <1>;129 micrel,led-mode = <1>;
128 };130 };
arch/arm/boot/dts/r8a7745-sk-rzg1e.dts+4−0
@@ -7,6 +7,7 @@ · 6 unmodified lines
7 7
8/dts-v1/;8/dts-v1/;
9#include "r8a7745.dtsi"9#include "r8a7745.dtsi"
10#include <dt-bindings/gpio/gpio.h>
10 11
11/ {12/ {
12 model = "SK-RZG1E";13 model = "SK-RZG1E";
@@ -64,9 +65,12 @@ · 51 unmodified lines
64 status = "okay";65 status = "okay";
65 66
66 phy1: ethernet-phy@1 {67 phy1: ethernet-phy@1 {
68 compatible = "ethernet-phy-id0022.1537",
69 "ethernet-phy-ieee802.3-c22";
67 reg = <1>;70 reg = <1>;
68 interrupt-parent = <&irqc>;71 interrupt-parent = <&irqc>;
69 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;72 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
70 micrel,led-mode = <1>;73 micrel,led-mode = <1>;
74 reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
71 };75 };
72};76};
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts+2−0
@@ -79,6 +79,8 @@ · 78 unmodified lines
79 status = "okay";79 status = "okay";
80 80
81 phy3: ethernet-phy@3 {81 phy3: ethernet-phy@3 {
82 compatible = "ethernet-phy-id0022.1622",
83 "ethernet-phy-ieee802.3-c22";
82 reg = <3>;84 reg = <3>;
83 interrupt-parent = <&gpio5>;85 interrupt-parent = <&gpio5>;
84 interrupts = <16 IRQ_TYPE_LEVEL_LOW>;86 interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/r8a7778-bockw.dts+1−1
@@ -63,7 +63,7 @@ · 62 unmodified lines
63 63
64&bsc {64&bsc {
65 ethernet@18300000 {65 ethernet@18300000 {
66 compatible = "smsc,lan9220", "smsc,lan9115";66 compatible = "smsc,lan89218", "smsc,lan9115";
67 reg = <0x18300000 0x1000>;67 reg = <0x18300000 0x1000>;
68 68
69 phy-mode = "mii";69 phy-mode = "mii";
arch/arm/boot/dts/r8a7779-marzen.dts+1−1
@@ -52,7 +52,7 @@ · 51 unmodified lines
52 };52 };
53 53
54 ethernet@18000000 {54 ethernet@18000000 {
55 compatible = "smsc,lan9220", "smsc,lan9115";55 compatible = "smsc,lan89218", "smsc,lan9115";
56 reg = <0x18000000 0x100>;56 reg = <0x18000000 0x100>;
57 pinctrl-0 = <&ethernet_pins>;57 pinctrl-0 = <&ethernet_pins>;
58 pinctrl-names = "default";58 pinctrl-names = "default";
arch/arm/boot/dts/r8a7790-lager.dts+2−0
@@ -678,6 +678,8 @@ · 677 unmodified lines
678 status = "okay";678 status = "okay";
679 679
680 phy1: ethernet-phy@1 {680 phy1: ethernet-phy@1 {
681 compatible = "ethernet-phy-id0022.1537",
682 "ethernet-phy-ieee802.3-c22";
681 reg = <1>;683 reg = <1>;
682 interrupt-parent = <&irqc0>;684 interrupt-parent = <&irqc0>;
683 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;685 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/r8a7790-stout.dts+2−0
@@ -199,6 +199,8 @@ · 198 unmodified lines
199 status = "okay";199 status = "okay";
200 200
201 phy1: ethernet-phy@1 {201 phy1: ethernet-phy@1 {
202 compatible = "ethernet-phy-id0022.1537",
203 "ethernet-phy-ieee802.3-c22";
202 reg = <1>;204 reg = <1>;
203 interrupt-parent = <&irqc0>;205 interrupt-parent = <&irqc0>;
204 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;206 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/r8a7791-koelsch.dts+2−0
@@ -637,6 +637,8 @@ · 636 unmodified lines
637 status = "okay";637 status = "okay";
638 638
639 phy1: ethernet-phy@1 {639 phy1: ethernet-phy@1 {
640 compatible = "ethernet-phy-id0022.1537",
641 "ethernet-phy-ieee802.3-c22";
640 reg = <1>;642 reg = <1>;
641 interrupt-parent = <&irqc0>;643 interrupt-parent = <&irqc0>;
642 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;644 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/r8a7791-porter.dts+2−0
@@ -302,6 +302,8 @@ · 301 unmodified lines
302 status = "okay";302 status = "okay";
303 303
304 phy1: ethernet-phy@1 {304 phy1: ethernet-phy@1 {
305 compatible = "ethernet-phy-id0022.1537",
306 "ethernet-phy-ieee802.3-c22";
305 reg = <1>;307 reg = <1>;
306 interrupt-parent = <&irqc0>;308 interrupt-parent = <&irqc0>;
307 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;309 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/r8a7793-gose.dts+2−0
@@ -595,6 +595,8 @@ · 594 unmodified lines
595 status = "okay";595 status = "okay";
596 596
597 phy1: ethernet-phy@1 {597 phy1: ethernet-phy@1 {
598 compatible = "ethernet-phy-id0022.1537",
599 "ethernet-phy-ieee802.3-c22";
598 reg = <1>;600 reg = <1>;
599 interrupt-parent = <&irqc0>;601 interrupt-parent = <&irqc0>;
600 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;602 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/r8a7794-alt.dts+2−0
@@ -383,6 +383,8 @@ · 382 unmodified lines
383 status = "okay";383 status = "okay";
384 384
385 phy1: ethernet-phy@1 {385 phy1: ethernet-phy@1 {
386 compatible = "ethernet-phy-id0022.1537",
387 "ethernet-phy-ieee802.3-c22";
386 reg = <1>;388 reg = <1>;
387 interrupt-parent = <&irqc0>;389 interrupt-parent = <&irqc0>;
388 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;390 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/r8a7794-silk.dts+2−0
@@ -397,6 +397,8 @@ · 396 unmodified lines
397 status = "okay";397 status = "okay";
398 398
399 phy1: ethernet-phy@1 {399 phy1: ethernet-phy@1 {
400 compatible = "ethernet-phy-id0022.1537",
401 "ethernet-phy-ieee802.3-c22";
400 reg = <1>;402 reg = <1>;
401 interrupt-parent = <&irqc0>;403 interrupt-parent = <&irqc0>;
402 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;404 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/rk3036.dtsi+5−5
@@ -416,8 +416,8 @@ · 415 unmodified lines
416 compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";416 compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
417 reg = <0x20044000 0x20>;417 reg = <0x20044000 0x20>;
418 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;418 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
419 clocks = <&xin24m>, <&cru PCLK_TIMER>;419 clocks = <&cru PCLK_TIMER>, <&xin24m>;
420 clock-names = "timer", "pclk";420 clock-names = "pclk", "timer";
421 };421 };
422 422
423 pwm0: pwm@20050000 {423 pwm0: pwm@20050000 {
@@ -575,7 +575,7 @@ · 151 unmodified lines
575 #size-cells = <1>;575 #size-cells = <1>;
576 ranges;576 ranges;
577 577
578 gpio0: gpio0@2007c000 {578 gpio0: gpio@2007c000 {
579 compatible = "rockchip,gpio-bank";579 compatible = "rockchip,gpio-bank";
580 reg = <0x2007c000 0x100>;580 reg = <0x2007c000 0x100>;
581 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;581 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
@@ -588,7 +588,7 @@ · 6 unmodified lines
588 #interrupt-cells = <2>;588 #interrupt-cells = <2>;
589 };589 };
590 590
591 gpio1: gpio1@20080000 {591 gpio1: gpio@20080000 {
592 compatible = "rockchip,gpio-bank";592 compatible = "rockchip,gpio-bank";
593 reg = <0x20080000 0x100>;593 reg = <0x20080000 0x100>;
594 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;594 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -601,7 +601,7 @@ · 6 unmodified lines
601 #interrupt-cells = <2>;601 #interrupt-cells = <2>;
602 };602 };
603 603
604 gpio2: gpio2@20084000 {604 gpio2: gpio@20084000 {
605 compatible = "rockchip,gpio-bank";605 compatible = "rockchip,gpio-bank";
606 reg = <0x20084000 0x100>;606 reg = <0x20084000 0x100>;
607 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;607 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
arch/arm/boot/dts/rk3066a-mk808.dts+27−0
@@ -4,6 +4,7 @@ · 3 unmodified lines
4 */4 */
5 5
6/dts-v1/;6/dts-v1/;
7#include <dt-bindings/input/input.h>
7#include "rk3066a.dtsi"8#include "rk3066a.dtsi"
8 9
9/ {10/ {
@@ -24,6 +25,20 @@ · 14 unmodified lines
24 device_type = "memory";25 device_type = "memory";
25 };26 };
26 27
28 adc-keys {
29 compatible = "adc-keys";
30 io-channels = <&saradc 1>;
31 io-channel-names = "buttons";
32 keyup-threshold-microvolt = <2500000>;
33 poll-interval = <100>;
34
35 recovery {
36 label = "recovery";
37 linux,code = <KEY_VENDOR>;
38 press-threshold-microvolt = <0>;
39 };
40 };
41
27 gpio-leds {42 gpio-leds {
28 compatible = "gpio-leds";43 compatible = "gpio-leds";
29 44
@@ -46,6 +61,13 @@ · 16 unmodified lines
46 };61 };
47 };62 };
48 63
64 vcc_2v5: vcc-2v5 {
65 compatible = "regulator-fixed";
66 regulator-name = "vcc_2v5";
67 regulator-min-microvolt = <2500000>;
68 regulator-max-microvolt = <2500000>;
69 };
70
49 vcc_io: vcc-io {71 vcc_io: vcc-io {
50 compatible = "regulator-fixed";72 compatible = "regulator-fixed";
51 regulator-name = "vcc_io";73 regulator-name = "vcc_io";
@@ -164,6 +186,11 @@ · 112 unmodified lines
164 };186 };
165};187};
166 188
189&saradc {
190 vref-supply = <&vcc_2v5>;
191 status = "okay";
192};
193
167&uart2 {194&uart2 {
168 status = "okay";195 status = "okay";
169};196};
arch/arm/boot/dts/rk3066a.dtsi+15−17
@@ -23,16 +23,15 @@ · 22 unmodified lines
23 compatible = "arm,cortex-a9";23 compatible = "arm,cortex-a9";
24 next-level-cache = <&L2>;24 next-level-cache = <&L2>;
25 reg = <0x0>;25 reg = <0x0>;
26 operating-points = <26 operating-points =
27 /* kHz uV */27 /* kHz uV */
28 1416000 130000028 <1416000 1300000>,
29 1200000 117500029 <1200000 1175000>,
30 1008000 112500030 <1008000 1125000>,
31 816000 112500031 <816000 1125000>,
32 600000 110000032 <600000 1100000>,
33 504000 110000033 <504000 1100000>,
34 312000 107500034 <312000 1075000>;
35 >;
36 clock-latency = <40000>;35 clock-latency = <40000>;
37 clocks = <&cru ARMCLK>;36 clocks = <&cru ARMCLK>;
38 };37 };
@@ -273,7 +272,7 @@ · 234 unmodified lines
273 #size-cells = <1>;272 #size-cells = <1>;
274 ranges;273 ranges;
275 274
276 gpio0: gpio0@20034000 {275 gpio0: gpio@20034000 {
277 compatible = "rockchip,gpio-bank";276 compatible = "rockchip,gpio-bank";
278 reg = <0x20034000 0x100>;277 reg = <0x20034000 0x100>;
279 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;278 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -286,7 +285,7 @@ · 6 unmodified lines
286 #interrupt-cells = <2>;285 #interrupt-cells = <2>;
287 };286 };
288 287
289 gpio1: gpio1@2003c000 {288 gpio1: gpio@2003c000 {
290 compatible = "rockchip,gpio-bank";289 compatible = "rockchip,gpio-bank";
291 reg = <0x2003c000 0x100>;290 reg = <0x2003c000 0x100>;
292 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;291 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -299,7 +298,7 @@ · 6 unmodified lines
299 #interrupt-cells = <2>;298 #interrupt-cells = <2>;
300 };299 };
301 300
302 gpio2: gpio2@2003e000 {301 gpio2: gpio@2003e000 {
303 compatible = "rockchip,gpio-bank";302 compatible = "rockchip,gpio-bank";
304 reg = <0x2003e000 0x100>;303 reg = <0x2003e000 0x100>;
305 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;304 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -312,7 +311,7 @@ · 6 unmodified lines
312 #interrupt-cells = <2>;311 #interrupt-cells = <2>;
313 };312 };
314 313
315 gpio3: gpio3@20080000 {314 gpio3: gpio@20080000 {
316 compatible = "rockchip,gpio-bank";315 compatible = "rockchip,gpio-bank";
317 reg = <0x20080000 0x100>;316 reg = <0x20080000 0x100>;
318 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;317 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -325,7 +324,7 @@ · 6 unmodified lines
325 #interrupt-cells = <2>;324 #interrupt-cells = <2>;
326 };325 };
327 326
328 gpio4: gpio4@20084000 {327 gpio4: gpio@20084000 {
329 compatible = "rockchip,gpio-bank";328 compatible = "rockchip,gpio-bank";
330 reg = <0x20084000 0x100>;329 reg = <0x20084000 0x100>;
331 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;330 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -338,7 +337,7 @@ · 6 unmodified lines
338 #interrupt-cells = <2>;337 #interrupt-cells = <2>;
339 };338 };
340 339
341 gpio6: gpio6@2000a000 {340 gpio6: gpio@2000a000 {
342 compatible = "rockchip,gpio-bank";341 compatible = "rockchip,gpio-bank";
343 reg = <0x2000a000 0x100>;342 reg = <0x2000a000 0x100>;
344 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;343 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
@@ -682,8 +681,7 @@ · 337 unmodified lines
682 compatible = "rockchip,rk3066-grf", "syscon", "simple-mfd";681 compatible = "rockchip,rk3066-grf", "syscon", "simple-mfd";
683 682
684 usbphy: usbphy {683 usbphy: usbphy {
685 compatible = "rockchip,rk3066a-usb-phy",684 compatible = "rockchip,rk3066a-usb-phy";
686 "rockchip,rk3288-usb-phy";
687 #address-cells = <1>;685 #address-cells = <1>;
688 #size-cells = <0>;686 #size-cells = <0>;
689 status = "disabled";687 status = "disabled";
arch/arm/boot/dts/rk3188.dtsi+6−7
@@ -54,7 +54,7 @@ · 53 unmodified lines
54 };54 };
55 };55 };
56 56
57 cpu0_opp_table: opp_table0 {57 cpu0_opp_table: opp-table-0 {
58 compatible = "operating-points-v2";58 compatible = "operating-points-v2";
59 opp-shared;59 opp-shared;
60 60
@@ -223,7 +223,7 @@ · 162 unmodified lines
223 #size-cells = <1>;223 #size-cells = <1>;
224 ranges;224 ranges;
225 225
226 gpio0: gpio0@2000a000 {226 gpio0: gpio@2000a000 {
227 compatible = "rockchip,rk3188-gpio-bank0";227 compatible = "rockchip,rk3188-gpio-bank0";
228 reg = <0x2000a000 0x100>;228 reg = <0x2000a000 0x100>;
229 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;229 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -236,7 +236,7 @@ · 6 unmodified lines
236 #interrupt-cells = <2>;236 #interrupt-cells = <2>;
237 };237 };
238 238
239 gpio1: gpio1@2003c000 {239 gpio1: gpio@2003c000 {
240 compatible = "rockchip,gpio-bank";240 compatible = "rockchip,gpio-bank";
241 reg = <0x2003c000 0x100>;241 reg = <0x2003c000 0x100>;
242 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;242 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -249,7 +249,7 @@ · 6 unmodified lines
249 #interrupt-cells = <2>;249 #interrupt-cells = <2>;
250 };250 };
251 251
252 gpio2: gpio2@2003e000 {252 gpio2: gpio@2003e000 {
253 compatible = "rockchip,gpio-bank";253 compatible = "rockchip,gpio-bank";
254 reg = <0x2003e000 0x100>;254 reg = <0x2003e000 0x100>;
255 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;255 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -262,7 +262,7 @@ · 6 unmodified lines
262 #interrupt-cells = <2>;262 #interrupt-cells = <2>;
263 };263 };
264 264
265 gpio3: gpio3@20080000 {265 gpio3: gpio@20080000 {
266 compatible = "rockchip,gpio-bank";266 compatible = "rockchip,gpio-bank";
267 reg = <0x20080000 0x100>;267 reg = <0x20080000 0x100>;
268 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;268 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -647,8 +647,7 @@ · 378 unmodified lines
647 };647 };
648 648
649 usbphy: usbphy {649 usbphy: usbphy {
650 compatible = "rockchip,rk3188-usb-phy",650 compatible = "rockchip,rk3188-usb-phy";
651 "rockchip,rk3288-usb-phy";
652 #address-cells = <1>;651 #address-cells = <1>;
653 #size-cells = <0>;652 #size-cells = <0>;
654 status = "disabled";653 status = "disabled";
arch/arm/boot/dts/rk3229.dtsi+1−1
@@ -10,7 +10,7 @@ · 9 unmodified lines
10 10
11 /delete-node/ opp-table0;11 /delete-node/ opp-table0;
12 12
13 cpu0_opp_table: opp_table0 {13 cpu0_opp_table: opp-table-0 {
14 compatible = "operating-points-v2";14 compatible = "operating-points-v2";
15 opp-shared;15 opp-shared;
16 16
arch/arm/boot/dts/rk322x.dtsi+7−7
@@ -68,7 +68,7 @@ · 67 unmodified lines
68 };68 };
69 };69 };
70 70
71 cpu0_opp_table: opp_table0 {71 cpu0_opp_table: opp-table-0 {
72 compatible = "operating-points-v2";72 compatible = "operating-points-v2";
73 opp-shared;73 opp-shared;
74 74
@@ -477,8 +477,8 @@ · 402 unmodified lines
477 compatible = "rockchip,rk3228-timer", "rockchip,rk3288-timer";477 compatible = "rockchip,rk3228-timer", "rockchip,rk3288-timer";
478 reg = <0x110c0000 0x20>;478 reg = <0x110c0000 0x20>;
479 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;479 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
480 clocks = <&xin24m>, <&cru PCLK_TIMER>;480 clocks = <&cru PCLK_TIMER>, <&xin24m>;
481 clock-names = "timer", "pclk";481 clock-names = "pclk", "timer";
482 };482 };
483 483
484 cru: clock-controller@110e0000 {484 cru: clock-controller@110e0000 {
@@ -946,7 +946,7 @@ · 461 unmodified lines
946 #size-cells = <1>;946 #size-cells = <1>;
947 ranges;947 ranges;
948 948
949 gpio0: gpio0@11110000 {949 gpio0: gpio@11110000 {
950 compatible = "rockchip,gpio-bank";950 compatible = "rockchip,gpio-bank";
951 reg = <0x11110000 0x100>;951 reg = <0x11110000 0x100>;
952 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;952 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
@@ -959,7 +959,7 @@ · 6 unmodified lines
959 #interrupt-cells = <2>;959 #interrupt-cells = <2>;
960 };960 };
961 961
962 gpio1: gpio1@11120000 {962 gpio1: gpio@11120000 {
963 compatible = "rockchip,gpio-bank";963 compatible = "rockchip,gpio-bank";
964 reg = <0x11120000 0x100>;964 reg = <0x11120000 0x100>;
965 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;965 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -972,7 +972,7 @@ · 6 unmodified lines
972 #interrupt-cells = <2>;972 #interrupt-cells = <2>;
973 };973 };
974 974
975 gpio2: gpio2@11130000 {975 gpio2: gpio@11130000 {
976 compatible = "rockchip,gpio-bank";976 compatible = "rockchip,gpio-bank";
977 reg = <0x11130000 0x100>;977 reg = <0x11130000 0x100>;
978 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;978 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -985,7 +985,7 @@ · 6 unmodified lines
985 #interrupt-cells = <2>;985 #interrupt-cells = <2>;
986 };986 };
987 987
988 gpio3: gpio3@11140000 {988 gpio3: gpio@11140000 {
989 compatible = "rockchip,gpio-bank";989 compatible = "rockchip,gpio-bank";
990 reg = <0x11140000 0x100>;990 reg = <0x11140000 0x100>;
991 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;991 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
arch/arm/boot/dts/rk3288.dtsi+11−11
@@ -100,7 +100,7 @@ · 99 unmodified lines
100 };100 };
101 };101 };
102 102
103 cpu_opp_table: cpu-opp-table {103 cpu_opp_table: opp-table-0 {
104 compatible = "operating-points-v2";104 compatible = "operating-points-v2";
105 opp-shared;105 opp-shared;
106 106
@@ -1278,7 +1278,7 @@ · 1171 unmodified lines
1278 status = "disabled";1278 status = "disabled";
1279 };1279 };
1280 1280
1281 gpu_opp_table: gpu-opp-table {1281 gpu_opp_table: opp-table-1 {
1282 compatible = "operating-points-v2";1282 compatible = "operating-points-v2";
1283 1283
1284 opp-100000000 {1284 opp-100000000 {
@@ -1422,7 +1422,7 @@ · 137 unmodified lines
1422 #size-cells = <2>;1422 #size-cells = <2>;
1423 ranges;1423 ranges;
1424 1424
1425 gpio0: gpio0@ff750000 {1425 gpio0: gpio@ff750000 {
1426 compatible = "rockchip,gpio-bank";1426 compatible = "rockchip,gpio-bank";
1427 reg = <0x0 0xff750000 0x0 0x100>;1427 reg = <0x0 0xff750000 0x0 0x100>;
1428 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;1428 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -1435,7 +1435,7 @@ · 6 unmodified lines
1435 #interrupt-cells = <2>;1435 #interrupt-cells = <2>;
1436 };1436 };
1437 1437
1438 gpio1: gpio1@ff780000 {1438 gpio1: gpio@ff780000 {
1439 compatible = "rockchip,gpio-bank";1439 compatible = "rockchip,gpio-bank";
1440 reg = <0x0 0xff780000 0x0 0x100>;1440 reg = <0x0 0xff780000 0x0 0x100>;
1441 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;1441 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -1448,7 +1448,7 @@ · 6 unmodified lines
1448 #interrupt-cells = <2>;1448 #interrupt-cells = <2>;
1449 };1449 };
1450 1450
1451 gpio2: gpio2@ff790000 {1451 gpio2: gpio@ff790000 {
1452 compatible = "rockchip,gpio-bank";1452 compatible = "rockchip,gpio-bank";
1453 reg = <0x0 0xff790000 0x0 0x100>;1453 reg = <0x0 0xff790000 0x0 0x100>;
1454 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;1454 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -1461,7 +1461,7 @@ · 6 unmodified lines
1461 #interrupt-cells = <2>;1461 #interrupt-cells = <2>;
1462 };1462 };
1463 1463
1464 gpio3: gpio3@ff7a0000 {1464 gpio3: gpio@ff7a0000 {
1465 compatible = "rockchip,gpio-bank";1465 compatible = "rockchip,gpio-bank";
1466 reg = <0x0 0xff7a0000 0x0 0x100>;1466 reg = <0x0 0xff7a0000 0x0 0x100>;
1467 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;1467 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -1474,7 +1474,7 @@ · 6 unmodified lines
1474 #interrupt-cells = <2>;1474 #interrupt-cells = <2>;
1475 };1475 };
1476 1476
1477 gpio4: gpio4@ff7b0000 {1477 gpio4: gpio@ff7b0000 {
1478 compatible = "rockchip,gpio-bank";1478 compatible = "rockchip,gpio-bank";
1479 reg = <0x0 0xff7b0000 0x0 0x100>;1479 reg = <0x0 0xff7b0000 0x0 0x100>;
1480 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;1480 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -1487,7 +1487,7 @@ · 6 unmodified lines
1487 #interrupt-cells = <2>;1487 #interrupt-cells = <2>;
1488 };1488 };
1489 1489
1490 gpio5: gpio5@ff7c0000 {1490 gpio5: gpio@ff7c0000 {
1491 compatible = "rockchip,gpio-bank";1491 compatible = "rockchip,gpio-bank";
1492 reg = <0x0 0xff7c0000 0x0 0x100>;1492 reg = <0x0 0xff7c0000 0x0 0x100>;
1493 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;1493 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -1500,7 +1500,7 @@ · 6 unmodified lines
1500 #interrupt-cells = <2>;1500 #interrupt-cells = <2>;
1501 };1501 };
1502 1502
1503 gpio6: gpio6@ff7d0000 {1503 gpio6: gpio@ff7d0000 {
1504 compatible = "rockchip,gpio-bank";1504 compatible = "rockchip,gpio-bank";
1505 reg = <0x0 0xff7d0000 0x0 0x100>;1505 reg = <0x0 0xff7d0000 0x0 0x100>;
1506 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;1506 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
@@ -1513,7 +1513,7 @@ · 6 unmodified lines
1513 #interrupt-cells = <2>;1513 #interrupt-cells = <2>;
1514 };1514 };
1515 1515
1516 gpio7: gpio7@ff7e0000 {1516 gpio7: gpio@ff7e0000 {
1517 compatible = "rockchip,gpio-bank";1517 compatible = "rockchip,gpio-bank";
1518 reg = <0x0 0xff7e0000 0x0 0x100>;1518 reg = <0x0 0xff7e0000 0x0 0x100>;
1519 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;1519 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
@@ -1526,7 +1526,7 @@ · 6 unmodified lines
1526 #interrupt-cells = <2>;1526 #interrupt-cells = <2>;
1527 };1527 };
1528 1528
1529 gpio8: gpio8@ff7f0000 {1529 gpio8: gpio@ff7f0000 {
1530 compatible = "rockchip,gpio-bank";1530 compatible = "rockchip,gpio-bank";
1531 reg = <0x0 0xff7f0000 0x0 0x100>;1531 reg = <0x0 0xff7f0000 0x0 0x100>;
1532 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;1532 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
arch/arm/boot/dts/rv1108.dtsi+8−8
@@ -40,7 +40,7 @@ · 39 unmodified lines
40 };40 };
41 };41 };
42 42
43 cpu_opp_table: opp_table {43 cpu_opp_table: opp-table-0 {
44 compatible = "operating-points-v2";44 compatible = "operating-points-v2";
45 45
46 opp-408000000 {46 opp-408000000 {
@@ -300,8 +300,8 @@ · 253 unmodified lines
300 compatible = "rockchip,rv1108-timer", "rockchip,rk3288-timer";300 compatible = "rockchip,rv1108-timer", "rockchip,rk3288-timer";
301 reg = <0x10350000 0x20>;301 reg = <0x10350000 0x20>;
302 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;302 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
303 clocks = <&xin24m>, <&cru PCLK_TIMER>;303 clocks = <&cru PCLK_TIMER>, <&xin24m>;
304 clock-names = "timer", "pclk";304 clock-names = "pclk", "timer";
305 };305 };
306 306
307 watchdog: watchdog@10360000 {307 watchdog: watchdog@10360000 {
@@ -557,7 +557,7 @@ · 249 unmodified lines
557 status = "disabled";557 status = "disabled";
558 };558 };
559 559
560 gmac: eth@30200000 {560 gmac: ethernet@30200000 {
561 compatible = "rockchip,rv1108-gmac";561 compatible = "rockchip,rv1108-gmac";
562 reg = <0x30200000 0x10000>;562 reg = <0x30200000 0x10000>;
563 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,563 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
@@ -600,7 +600,7 @@ · 36 unmodified lines
600 #size-cells = <1>;600 #size-cells = <1>;
601 ranges;601 ranges;
602 602
603 gpio0: gpio0@20030000 {603 gpio0: gpio@20030000 {
604 compatible = "rockchip,gpio-bank";604 compatible = "rockchip,gpio-bank";
605 reg = <0x20030000 0x100>;605 reg = <0x20030000 0x100>;
606 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;606 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
@@ -613,7 +613,7 @@ · 6 unmodified lines
613 #interrupt-cells = <2>;613 #interrupt-cells = <2>;
614 };614 };
615 615
616 gpio1: gpio1@10310000 {616 gpio1: gpio@10310000 {
617 compatible = "rockchip,gpio-bank";617 compatible = "rockchip,gpio-bank";
618 reg = <0x10310000 0x100>;618 reg = <0x10310000 0x100>;
619 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;619 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
@@ -626,7 +626,7 @@ · 6 unmodified lines
626 #interrupt-cells = <2>;626 #interrupt-cells = <2>;
627 };627 };
628 628
629 gpio2: gpio2@10320000 {629 gpio2: gpio@10320000 {
630 compatible = "rockchip,gpio-bank";630 compatible = "rockchip,gpio-bank";
631 reg = <0x10320000 0x100>;631 reg = <0x10320000 0x100>;
632 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;632 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
@@ -639,7 +639,7 @@ · 6 unmodified lines
639 #interrupt-cells = <2>;639 #interrupt-cells = <2>;
640 };640 };
641 641
642 gpio3: gpio3@10330000 {642 gpio3: gpio@10330000 {
643 compatible = "rockchip,gpio-bank";643 compatible = "rockchip,gpio-bank";
644 reg = <0x10330000 0x100>;644 reg = <0x10330000 0x100>;
645 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;645 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
arch/arm/boot/dts/s5pv210-fascinate4g.dts+1−0
@@ -8,6 +8,7 @@ · 7 unmodified lines
8/ {8/ {
9 model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210";9 model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210";
10 compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210";10 compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210";
11 chassis-type = "handset";
11 12
12 chosen {13 chosen {
13 stdout-path = &uart2;14 stdout-path = &uart2;
arch/arm/boot/dts/s5pv210-galaxys.dts+1−0
@@ -8,6 +8,7 @@ · 7 unmodified lines
8/ {8/ {
9 model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210";9 model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210";
10 compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210";10 compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210";
11 chassis-type = "handset";
11 12
12 chosen {13 chosen {
13 stdout-path = &uart2;14 stdout-path = &uart2;
arch/arm/boot/dts/sama5d29.dtsi+16−0
@@ -0,0 +1,16 @@
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * sama5d29.dtsi - Device Tree Include file for SAMA5D29 SoC of the SAMA5D2
4 * family.
5 *
6 * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
7 *
8 * Author: Hari Prasath <Hari.PrasathGE@microchip.com>
9 *
10 */
11
12#include "sama5d2.dtsi"
13
14&macb0 {
15 compatible = "atmel,sama5d29-gem";
16};
arch/arm/boot/dts/sama7g5.dtsi+43−0
@@ -152,6 +152,13 @@ · 151 unmodified lines
152 reg = <0xe001d060 0x48>;152 reg = <0xe001d060 0x48>;
153 };153 };
154 154
155 rtc: rtc@e001d0a8 {
156 compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc";
157 reg = <0xe001d0a8 0x30>;
158 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
159 clocks = <&clk32k 1>;
160 };
161
155 ps_wdt: watchdog@e001d180 {162 ps_wdt: watchdog@e001d180 {
156 compatible = "microchip,sama7g5-wdt";163 compatible = "microchip,sama7g5-wdt";
157 reg = <0xe001d180 0x24>;164 reg = <0xe001d180 0x24>;
@@ -164,6 +171,32 @@ · 6 unmodified lines
164 reg = <0xe0020000 0x8>;171 reg = <0xe0020000 0x8>;
165 };172 };
166 173
174 tcb1: timer@e0800000 {
175 compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
176 #address-cells = <1>;
177 #size-cells = <0>;
178 reg = <0xe0800000 0x100>;
179 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
180 clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>;
181 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
182 };
183
184 adc: adc@e1000000 {
185 compatible = "microchip,sama7g5-adc";
186 reg = <0xe1000000 0x200>;
187 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
188 clocks = <&pmc PMC_TYPE_GCK 26>;
189 assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
190 assigned-clock-rates = <100000000>;
191 clock-names = "adc_clk";
192 dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>;
193 dma-names = "rx";
194 atmel,min-sample-rate-hz = <200000>;
195 atmel,max-sample-rate-hz = <20000000>;
196 atmel,startup-time-ms = <4>;
197 status = "disabled";
198 };
199
167 sdmmc0: mmc@e1204000 {200 sdmmc0: mmc@e1204000 {
168 compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";201 compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
169 reg = <0xe1204000 0x4000>;202 reg = <0xe1204000 0x4000>;
@@ -465,6 +498,16 @@ · 295 unmodified lines
465 status = "disabled";498 status = "disabled";
466 };499 };
467 500
501 tcb0: timer@e2814000 {
502 compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
503 #address-cells = <1>;
504 #size-cells = <0>;
505 reg = <0xe2814000 0x100>;
506 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
507 clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>;
508 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
509 };
510
468 flx8: flexcom@e2818000 {511 flx8: flexcom@e2818000 {
469 compatible = "atmel,sama5d2-flexcom";512 compatible = "atmel,sama5d2-flexcom";
470 reg = <0xe2818000 0x200>;513 reg = <0xe2818000 0x200>;
arch/arm/boot/dts/sh73a0-kzm9g.dts+1−1
@@ -169,7 +169,7 @@ · 168 unmodified lines
169 169
170&bsc {170&bsc {
171 ethernet@10000000 {171 ethernet@10000000 {
172 compatible = "smsc,lan9220", "smsc,lan9115";172 compatible = "smsc,lan9221", "smsc,lan9115";
173 reg = <0x10000000 0x100>;173 reg = <0x10000000 0x100>;
174 phy-mode = "mii";174 phy-mode = "mii";
175 interrupt-parent = <&irqpin0>;175 interrupt-parent = <&irqpin0>;
arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts+112−0
@@ -0,0 +1,112 @@
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "socfpga_arria10.dtsi"
5
6/ {
7
8 model = "Enclustra Mercury AA1";
9 compatible = "altr,socfpga-arria10", "altr,socfpga";
10
11 aliases {
12 ethernet0 = &gmac0;
13 serial1 = &uart1;
14 i2c0 = &i2c0;
15 i2c1 = &i2c1;
16 };
17
18 memory@0 {
19 name = "memory";
20 device_type = "memory";
21 reg = <0x0 0x80000000>; /* 2GB */
22 };
23
24 chosen {
25 stdout-path = "serial1:115200n8";
26 };
27};
28
29&eccmgr {
30 sdmmca-ecc@ff8c2c00 {
31 compatible = "altr,socfpga-sdmmc-ecc";
32 reg = <0xff8c2c00 0x400>;
33 altr,ecc-parent = <&mmc>;
34 interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
35 <47 IRQ_TYPE_LEVEL_HIGH>,
36 <16 IRQ_TYPE_LEVEL_HIGH>,
37 <48 IRQ_TYPE_LEVEL_HIGH>;
38 };
39};
40
41&gmac0 {
42 phy-mode = "rgmii";
43 phy-addr = <0xffffffff>; /* probe for phy addr */
44
45 max-frame-size = <3800>;
46 status = "okay";
47
48 phy-handle = <&phy3>;
49
50 mdio {
51 #address-cells = <1>;
52 #size-cells = <0>;
53 compatible = "snps,dwmac-mdio";
54 phy3: ethernet-phy@3 {
55 txd0-skew-ps = <0>; /* -420ps */
56 txd1-skew-ps = <0>; /* -420ps */
57 txd2-skew-ps = <0>; /* -420ps */
58 txd3-skew-ps = <0>; /* -420ps */
59 rxd0-skew-ps = <420>; /* 0ps */
60 rxd1-skew-ps = <420>; /* 0ps */
61 rxd2-skew-ps = <420>; /* 0ps */
62 rxd3-skew-ps = <420>; /* 0ps */
63 txen-skew-ps = <0>; /* -420ps */
64 txc-skew-ps = <1860>; /* 960ps */
65 rxdv-skew-ps = <420>; /* 0ps */
66 rxc-skew-ps = <1680>; /* 780ps */
67 reg = <3>;
68 };
69 };
70};
71
72&gpio0 {
73 status = "okay";
74};
75
76&gpio1 {
77 status = "okay";
78};
79
80&gpio2 {
81 status = "okay";
82};
83
84&i2c1 {
85 status = "okay";
86 isl12022: isl12022@6f {
87 status = "okay";
88 compatible = "isil,isl12022";
89 reg = <0x6f>;
90 };
91};
92
93/* Following mappings are taken from arria10 socdk dts */
94&mmc {
95 status = "okay";
96 cap-sd-highspeed;
97 broken-cd;
98 bus-width = <4>;
99};
100
101&osc1 {
102 clock-frequency = <33330000>;
103};
104
105&uart1 {
106 status = "okay";
107};
108
109&usb0 {
110 status = "okay";
111 dr_mode = "host";
112};
arch/arm/boot/dts/spear1310.dtsi+0−6
@@ -82,8 +82,6 @@ · 81 unmodified lines
82 reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;82 reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
83 reg-names = "dbi", "config";83 reg-names = "dbi", "config";
84 interrupts = <0 68 0x4>;84 interrupts = <0 68 0x4>;
85 interrupt-map-mask = <0 0 0 0>;
86 interrupt-map = <0x0 0 &gic 0 68 0x4>;
87 num-lanes = <1>;85 num-lanes = <1>;
88 phys = <&miphy0 1>;86 phys = <&miphy0 1>;
89 phy-names = "pcie-phy";87 phy-names = "pcie-phy";
@@ -101,8 +99,6 @@ · 11 unmodified lines
101 reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;99 reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;
102 reg-names = "dbi", "config";100 reg-names = "dbi", "config";
103 interrupts = <0 69 0x4>;101 interrupts = <0 69 0x4>;
104 interrupt-map-mask = <0 0 0 0>;
105 interrupt-map = <0x0 0 &gic 0 69 0x4>;
106 num-lanes = <1>;102 num-lanes = <1>;
107 phys = <&miphy1 1>;103 phys = <&miphy1 1>;
108 phy-names = "pcie-phy";104 phy-names = "pcie-phy";
@@ -120,8 +116,6 @@ · 11 unmodified lines
120 reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;116 reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;
121 reg-names = "dbi", "config";117 reg-names = "dbi", "config";
122 interrupts = <0 70 0x4>;118 interrupts = <0 70 0x4>;
123 interrupt-map-mask = <0 0 0 0>;
124 interrupt-map = <0x0 0 &gic 0 70 0x4>;
125 num-lanes = <1>;119 num-lanes = <1>;
126 phys = <&miphy2 1>;120 phys = <&miphy2 1>;
127 phy-names = "pcie-phy";121 phy-names = "pcie-phy";
arch/arm/boot/dts/spear1340.dtsi+0−2
@@ -47,8 +47,6 @@ · 46 unmodified lines
47 reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;47 reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
48 reg-names = "dbi", "config";48 reg-names = "dbi", "config";
49 interrupts = <0 68 0x4>;49 interrupts = <0 68 0x4>;
50 interrupt-map-mask = <0 0 0 0>;
51 interrupt-map = <0x0 0 &gic 0 68 0x4>;
52 num-lanes = <1>;50 num-lanes = <1>;
53 phys = <&miphy0 1>;51 phys = <&miphy0 1>;
54 phy-names = "pcie-phy";52 phy-names = "pcie-phy";
arch/arm/boot/dts/ste-ab8500.dtsi+4−9
@@ -129,11 +129,6 @@ · 128 unmodified lines
129 io-channel-names = "aux1", "aux2";129 io-channel-names = "aux1", "aux2";
130 };130 };
131 131
132 ab8500_battery: ab8500_battery {
133 stericsson,battery-type = "LIPO";
134 thermistor-on-batctrl;
135 };
136
137 ab8500_fg {132 ab8500_fg {
138 compatible = "stericsson,ab8500-fg";133 compatible = "stericsson,ab8500-fg";
139 interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,134 interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
@@ -146,7 +141,7 @@ · 6 unmodified lines
146 "LOW_BAT_F",141 "LOW_BAT_F",
147 "CC_INT_CALIB",142 "CC_INT_CALIB",
148 "CCEOC";143 "CCEOC";
149 battery = <&ab8500_battery>;144 monitored-battery = <&battery>;
150 io-channels = <&gpadc 0x08>;145 io-channels = <&gpadc 0x08>;
151 io-channel-names = "main_bat_v";146 io-channel-names = "main_bat_v";
152 };147 };
@@ -163,7 +158,7 @@ · 10 unmodified lines
163 "BTEMP_HIGH",158 "BTEMP_HIGH",
164 "BTEMP_LOW_MEDIUM",159 "BTEMP_LOW_MEDIUM",
165 "BTEMP_MEDIUM_HIGH";160 "BTEMP_MEDIUM_HIGH";
166 battery = <&ab8500_battery>;161 monitored-battery = <&battery>;
167 io-channels = <&gpadc 0x02>,162 io-channels = <&gpadc 0x02>,
168 <&gpadc 0x01>;163 <&gpadc 0x01>;
169 io-channel-names = "btemp_ball",164 io-channel-names = "btemp_ball",
@@ -200,7 +195,7 @@ · 30 unmodified lines
200 "VBUS_OVV",195 "VBUS_OVV",
201 "CH_WD_EXP",196 "CH_WD_EXP",
202 "VBUS_CH_DROP_END";197 "VBUS_CH_DROP_END";
203 battery = <&ab8500_battery>;198 monitored-battery = <&battery>;
204 vddadc-supply = <&ab8500_ldo_tvout_reg>;199 vddadc-supply = <&ab8500_ldo_tvout_reg>;
205 io-channels = <&gpadc 0x03>,200 io-channels = <&gpadc 0x03>,
206 <&gpadc 0x0a>,201 <&gpadc 0x0a>,
@@ -214,7 +209,7 @@ · 7 unmodified lines
214 209
215 ab8500_chargalg {210 ab8500_chargalg {
216 compatible = "stericsson,ab8500-chargalg";211 compatible = "stericsson,ab8500-chargalg";
217 battery = <&ab8500_battery>;212 monitored-battery = <&battery>;
218 };213 };
219 214
220 ab8500_usb: ab8500_usb {215 ab8500_usb: ab8500_usb {
arch/arm/boot/dts/ste-ab8505.dtsi+4−9
@@ -92,11 +92,6 @@ · 91 unmodified lines
92 };92 };
93 };93 };
94 94
95 ab8500_battery: ab8500_battery {
96 stericsson,battery-type = "LIPO";
97 thermistor-on-batctrl;
98 };
99
100 ab8500_fg {95 ab8500_fg {
101 status = "disabled";96 status = "disabled";
102 compatible = "stericsson,ab8500-fg";97 compatible = "stericsson,ab8500-fg";
@@ -110,7 +105,7 @@ · 7 unmodified lines
110 "LOW_BAT_F",105 "LOW_BAT_F",
111 "CC_INT_CALIB",106 "CC_INT_CALIB",
112 "CCEOC";107 "CCEOC";
113 battery = <&ab8500_battery>;108 monitored-battery = <&battery>;
114 io-channels = <&gpadc 0x08>;109 io-channels = <&gpadc 0x08>;
115 io-channel-names = "main_bat_v";110 io-channel-names = "main_bat_v";
116 };111 };
@@ -128,7 +123,7 @@ · 11 unmodified lines
128 "BTEMP_HIGH",123 "BTEMP_HIGH",
129 "BTEMP_LOW_MEDIUM",124 "BTEMP_LOW_MEDIUM",
130 "BTEMP_MEDIUM_HIGH";125 "BTEMP_MEDIUM_HIGH";
131 battery = <&ab8500_battery>;126 monitored-battery = <&battery>;
132 io-channels = <&gpadc 0x02>,127 io-channels = <&gpadc 0x02>,
133 <&gpadc 0x01>;128 <&gpadc 0x01>;
134 io-channel-names = "btemp_ball",129 io-channel-names = "btemp_ball",
@@ -166,7 +161,7 @@ · 31 unmodified lines
166 "VBUS_OVV",161 "VBUS_OVV",
167 "CH_WD_EXP",162 "CH_WD_EXP",
168 "VBUS_CH_DROP_END";163 "VBUS_CH_DROP_END";
169 battery = <&ab8500_battery>;164 monitored-battery = <&battery>;
170 vddadc-supply = <&ab8500_ldo_adc_reg>;165 vddadc-supply = <&ab8500_ldo_adc_reg>;
171 io-channels = <&gpadc 0x09>,166 io-channels = <&gpadc 0x09>,
172 <&gpadc 0x0b>;167 <&gpadc 0x0b>;
@@ -177,7 +172,7 @@ · 4 unmodified lines
177 ab8500_chargalg {172 ab8500_chargalg {
178 status = "disabled";173 status = "disabled";
179 compatible = "stericsson,ab8500-chargalg";174 compatible = "stericsson,ab8500-chargalg";
180 battery = <&ab8500_battery>;175 monitored-battery = <&battery>;
181 };176 };
182 177
183 ab8500_usb: ab8500_usb {178 ab8500_usb: ab8500_usb {
arch/arm/boot/dts/ste-href.dtsi+6−0
@@ -13,6 +13,12 @@ · 12 unmodified lines
13 reg = <0x00000000 0x20000000>;13 reg = <0x00000000 0x20000000>;
14 };14 };
15 15
16 battery: battery {
17 compatible = "simple-battery";
18 battery-type = "lithium-ion-polymer";
19 thermistor-on-batctrl;
20 };
21
16 soc {22 soc {
17 uart@80120000 {23 uart@80120000 {
18 pinctrl-names = "default", "sleep";24 pinctrl-names = "default", "sleep";
arch/arm/boot/dts/ste-snowball.dts+6−0
@@ -17,6 +17,12 @@ · 16 unmodified lines
17 reg = <0x00000000 0x20000000>;17 reg = <0x00000000 0x20000000>;
18 };18 };
19 19
20 battery: battery {
21 compatible = "simple-battery";
22 battery-type = "lithium-ion-polymer";
23 thermistor-on-batctrl;
24 };
25
20 en_3v3_reg: en_3v3 {26 en_3v3_reg: en_3v3 {
21 compatible = "regulator-fixed";27 compatible = "regulator-fixed";
22 regulator-name = "en-3v3-fixed-supply";28 regulator-name = "en-3v3-fixed-supply";
arch/arm/boot/dts/ste-ux500-samsung-codina.dts+4−0
@@ -43,6 +43,10 @@ · 42 unmodified lines
43 stdout-path = &serial2;43 stdout-path = &serial2;
44 };44 };
45 45
46 battery: battery {
47 compatible = "samsung,eb425161lu";
48 };
49
46 /* TI TXS0206 level translator for 2.9 V */50 /* TI TXS0206 level translator for 2.9 V */
47 sd_level_translator: regulator-gpio {51 sd_level_translator: regulator-gpio {
48 compatible = "regulator-fixed";52 compatible = "regulator-fixed";
arch/arm/boot/dts/ste-ux500-samsung-gavini.dts+4−0
@@ -20,6 +20,10 @@ · 19 unmodified lines
20 stdout-path = &serial2;20 stdout-path = &serial2;
21 };21 };
22 22
23 battery: battery {
24 compatible = "samsung,eb585157lu";
25 };
26
23 /* TI TXS0206 level translator for 2.9 V */27 /* TI TXS0206 level translator for 2.9 V */
24 sd_level_translator: regulator-gpio {28 sd_level_translator: regulator-gpio {
25 compatible = "regulator-fixed";29 compatible = "regulator-fixed";
arch/arm/boot/dts/ste-ux500-samsung-golden.dts+4−0
@@ -25,6 +25,10 @@ · 24 unmodified lines
25 stdout-path = &serial2;25 stdout-path = &serial2;
26 };26 };
27 27
28 battery: battery {
29 compatible = "samsung,eb-l1m7flu";
30 };
31
28 i2c-gpio-0 {32 i2c-gpio-0 {
29 compatible = "i2c-gpio";33 compatible = "i2c-gpio";
30 sda-gpios = <&gpio2 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;34 sda-gpios = <&gpio2 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
arch/arm/boot/dts/ste-ux500-samsung-janice.dts+7−0
@@ -20,6 +20,10 @@ · 19 unmodified lines
20 stdout-path = &serial2;20 stdout-path = &serial2;
21 };21 };
22 22
23 battery: battery {
24 compatible = "samsung,eb535151vu";
25 };
26
23 /* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */27 /* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */
24 ldo_3v3_reg: regulator-gpio-ldo-3v3 {28 ldo_3v3_reg: regulator-gpio-ldo-3v3 {
25 compatible = "regulator-fixed";29 compatible = "regulator-fixed";
@@ -266,6 +270,9 @@ · 240 unmodified lines
266 pinctrl-names = "default";270 pinctrl-names = "default";
267 pinctrl-0 = <&panel_default_mode>;271 pinctrl-0 = <&panel_default_mode>;
268 spi-3wire;272 spi-3wire;
273 /* TYPE 3: inverse clock polarity and phase */
274 spi-cpha;
275 spi-cpol;
269 276
270 port {277 port {
271 panel_in: endpoint {278 panel_in: endpoint {
arch/arm/boot/dts/ste-ux500-samsung-kyle.dts+4−0
@@ -24,6 +24,10 @@ · 23 unmodified lines
24 stdout-path = &serial2;24 stdout-path = &serial2;
25 };25 };
26 26
27 battery: battery {
28 compatible = "samsung,eb425161la";
29 };
30
27 /* TI TXS0206 level translator for 2.9 V */31 /* TI TXS0206 level translator for 2.9 V */
28 sd_level_translator: regulator-gpio {32 sd_level_translator: regulator-gpio {
29 compatible = "regulator-fixed";33 compatible = "regulator-fixed";
arch/arm/boot/dts/ste-ux500-samsung-skomer.dts+18−20
@@ -20,6 +20,10 @@ · 19 unmodified lines
20 stdout-path = &serial2;20 stdout-path = &serial2;
21 };21 };
22 22
23 battery: battery {
24 compatible = "samsung,eb485159lu";
25 };
26
23 /* TI TXS0206 level translator for 2.9 V */27 /* TI TXS0206 level translator for 2.9 V */
24 sd_level_translator: regulator-gpio {28 sd_level_translator: regulator-gpio {
25 compatible = "regulator-fixed";29 compatible = "regulator-fixed";
@@ -222,7 +226,9 @@ · 196 unmodified lines
222 };226 };
223 };227 };
224 228
225 // eMMC229 /*
230 * eMMC seems to be mostly Samsung KLM4G1YE4C "4YMD1R"
231 */
226 mmc@80005000 {232 mmc@80005000 {
227 arm,primecell-periphid = <0x10480180>;233 arm,primecell-periphid = <0x10480180>;
228 max-frequency = <100000000>;234 max-frequency = <100000000>;
@@ -232,6 +238,8 @@ · 3 unmodified lines
232 mmc-ddr-1_8v;238 mmc-ddr-1_8v;
233 no-sdio;239 no-sdio;
234 no-sd;240 no-sd;
241 /* From datasheet page 26 figure 9: 300 ms set-up time for 4GB */
242 post-power-on-delay-ms = <300>;
235 vmmc-supply = <&ldo_3v3_reg>;243 vmmc-supply = <&ldo_3v3_reg>;
236 pinctrl-names = "default", "sleep";244 pinctrl-names = "default", "sleep";
237 pinctrl-0 = <&mc2_a_1_default>;245 pinctrl-0 = <&mc2_a_1_default>;
@@ -292,10 +300,10 @@ · 54 unmodified lines
292 };300 };
293 301
294 ab8500_ldo_aux2 {302 ab8500_ldo_aux2 {
295 /* Supplies the Cypress TMA140 touchscreen only with 3.3V */303 /* Supplies the Cypress TMA140 touchscreen only with 3.0V */
296 regulator-name = "AUX2";304 regulator-name = "AUX2";
297 regulator-min-microvolt = <3300000>;305 regulator-min-microvolt = <3000000>;
298 regulator-max-microvolt = <3300000>;306 regulator-max-microvolt = <3000000>;
299 };307 };
300 308
301 ab8500_ldo_aux3 {309 ab8500_ldo_aux3 {
@@ -314,9 +322,9 @@ · 12 unmodified lines
314 322
315 ab8500_ldo_aux5 {323 ab8500_ldo_aux5 {
316 regulator-name = "AUX5";324 regulator-name = "AUX5";
325 /* Intended for 1V8 for touchscreen but actually left unused */
317 regulator-min-microvolt = <1050000>;326 regulator-min-microvolt = <1050000>;
318 regulator-max-microvolt = <2790000>;327 regulator-max-microvolt = <2790000>;
319 regulator-always-on;
320 };328 };
321 329
322 ab8500_ldo_aux6 {330 ab8500_ldo_aux6 {
@@ -444,31 +452,21 @@ · 121 unmodified lines
444};452};
445 453
446&pinctrl {454&pinctrl {
447 /*
448 * This extends the MC0 default config to include DAT32DIR
449 * which is used by this machine. If we don't do this the
450 * SD card does not work.
451 */
452 sdi0 {455 sdi0 {
453 mc0_a_1_default {456 mc0_a_1_default {
454 default_mux {457 default_cfg1 {
455 function = "mc0";458 /* GPIO18, 19 & 20 unused so pull down */
456 /* This machine uses the DAT31 pin */459 ste,config = <&gpio_in_pd>;
457 groups = "mc0_a_1", "mc0dat31dir_a_1";
458 };
459 default_cfg5 {
460 pins = "GPIO21_AB3"; /* DAT31DIR */
461 ste,config = <&out_hi>;
462 };460 };
463 };461 };
464 };462 };
465 463
466 /* The unused FBCLK needs to be pulled down on this machine */464 /* This is a reset line for the eMMC */
467 sdi2 {465 sdi2 {
468 mc2_a_1_default {466 mc2_a_1_default {
469 default_cfg2 {467 default_cfg2 {
470 pins = "GPIO130_C8"; /* FBCLK */468 pins = "GPIO130_C8"; /* FBCLK */
471 ste,config = <&in_pd>;469 ste,config = <&gpio_in_pd>;
472 };470 };
473 };471 };
474 };472 };
arch/arm/boot/dts/stm32mp13-pinctrl.dtsi+64−0
@@ -0,0 +1,64 @@
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4 * Author: Alexandre Torgue <alexandre.torgue@foss.st.com>
5 */
6#include <dt-bindings/pinctrl/stm32-pinfunc.h>
7
8&pinctrl {
9 sdmmc1_b4_pins_a: sdmmc1-b4-0 {
10 pins1 {
11 pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
12 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
13 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
14 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
15 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
16 slew-rate = <1>;
17 drive-push-pull;
18 bias-disable;
19 };
20 pins2 {
21 pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
22 slew-rate = <2>;
23 drive-push-pull;
24 bias-disable;
25 };
26 };
27
28 sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
29 pins1 {
30 pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
31 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
32 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
33 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
34 slew-rate = <1>;
35 drive-push-pull;
36 bias-disable;
37 };
38 pins2 {
39 pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
40 slew-rate = <2>;
41 drive-push-pull;
42 bias-disable;
43 };
44 pins3 {
45 pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
46 slew-rate = <1>;
47 drive-open-drain;
48 bias-disable;
49 };
50 };
51
52 uart4_pins_a: uart4-0 {
53 pins1 {
54 pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */
55 bias-disable;
56 drive-push-pull;
57 slew-rate = <0>;
58 };
59 pins2 {
60 pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
61 bias-disable;
62 };
63 };
64};
arch/arm/boot/dts/stm32mp131.dtsi+283−0
@@ -0,0 +1,283 @@
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4 * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
5 */
6#include <dt-bindings/interrupt-controller/arm-gic.h>
7
8/ {
9 #address-cells = <1>;
10 #size-cells = <1>;
11
12 cpus {
13 #address-cells = <1>;
14 #size-cells = <0>;
15
16 cpu0: cpu@0 {
17 compatible = "arm,cortex-a7";
18 device_type = "cpu";
19 reg = <0>;
20 };
21 };
22
23 arm-pmu {
24 compatible = "arm,cortex-a7-pmu";
25 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
26 interrupt-affinity = <&cpu0>;
27 interrupt-parent = <&intc>;
28 };
29
30 clocks {
31 clk_axi: clk-axi {
32 #clock-cells = <0>;
33 compatible = "fixed-clock";
34 clock-frequency = <266500000>;
35 };
36
37 clk_hse: clk-hse {
38 #clock-cells = <0>;
39 compatible = "fixed-clock";
40 clock-frequency = <24000000>;
41 };
42
43 clk_hsi: clk-hsi {
44 #clock-cells = <0>;
45 compatible = "fixed-clock";
46 clock-frequency = <64000000>;
47 };
48
49 clk_lsi: clk-lsi {
50 #clock-cells = <0>;
51 compatible = "fixed-clock";
52 clock-frequency = <32000>;
53 };
54
55 clk_pclk3: clk-pclk3 {
56 #clock-cells = <0>;
57 compatible = "fixed-clock";
58 clock-frequency = <104438965>;
59 };
60
61 clk_pclk4: clk-pclk4 {
62 #clock-cells = <0>;
63 compatible = "fixed-clock";
64 clock-frequency = <133250000>;
65 };
66
67 clk_pll4_p: clk-pll4_p {
68 #clock-cells = <0>;
69 compatible = "fixed-clock";
70 clock-frequency = <50000000>;
71 };
72
73 clk_pll4_r: clk-pll4_r {
74 #clock-cells = <0>;
75 compatible = "fixed-clock";
76 clock-frequency = <99000000>;
77 };
78 };
79
80 intc: interrupt-controller@a0021000 {
81 compatible = "arm,cortex-a7-gic";
82 #interrupt-cells = <3>;
83 interrupt-controller;
84 reg = <0xa0021000 0x1000>,
85 <0xa0022000 0x2000>;
86 };
87
88 psci {
89 compatible = "arm,psci-1.0";
90 method = "smc";
91 };
92
93 timer {
94 compatible = "arm,armv7-timer";
95 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
96 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
97 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
98 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
99 interrupt-parent = <&intc>;
100 always-on;
101 };
102
103 soc {
104 compatible = "simple-bus";
105 #address-cells = <1>;
106 #size-cells = <1>;
107 interrupt-parent = <&intc>;
108 ranges;
109
110 uart4: serial@40010000 {
111 compatible = "st,stm32h7-uart";
112 reg = <0x40010000 0x400>;
113 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
114 clocks = <&clk_hsi>;
115 status = "disabled";
116 };
117
118 syscfg: syscon@50020000 {
119 compatible = "st,stm32mp157-syscfg", "syscon";
120 reg = <0x50020000 0x400>;
121 clocks = <&clk_pclk3>;
122 };
123
124 sdmmc1: mmc@58005000 {
125 compatible = "arm,pl18x", "arm,primecell";
126 arm,primecell-periphid = <0x00253180>;
127 reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
128 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
129 interrupt-names = "cmd_irq";
130 clocks = <&clk_pll4_p>;
131 clock-names = "apb_pclk";
132 cap-sd-highspeed;
133 cap-mmc-highspeed;
134 max-frequency = <120000000>;
135 status = "disabled";
136 };
137
138 iwdg2: watchdog@5a002000 {
139 compatible = "st,stm32mp1-iwdg";
140 reg = <0x5a002000 0x400>;
141 clocks = <&clk_pclk4>, <&clk_lsi>;
142 clock-names = "pclk", "lsi";
143 status = "disabled";
144 };
145
146 bsec: efuse@5c005000 {
147 compatible = "st,stm32mp15-bsec";
148 reg = <0x5c005000 0x400>;
149 #address-cells = <1>;
150 #size-cells = <1>;
151
152 part_number_otp: part_number_otp@4 {
153 reg = <0x4 0x2>;
154 };
155 ts_cal1: calib@5c {
156 reg = <0x5c 0x2>;
157 };
158 ts_cal2: calib@5e {
159 reg = <0x5e 0x2>;
160 };
161 };
162
163 /*
164 * Break node order to solve dependency probe issue between
165 * pinctrl and exti.
166 */
167 pinctrl: pin-controller@50002000 {
168 #address-cells = <1>;
169 #size-cells = <1>;
170 compatible = "st,stm32mp135-pinctrl";
171 ranges = <0 0x50002000 0x8400>;
172 pins-are-numbered;
173
174 gpioa: gpio@50002000 {
175 gpio-controller;
176 #gpio-cells = <2>;
177 interrupt-controller;
178 #interrupt-cells = <2>;
179 reg = <0x0 0x400>;
180 clocks = <&clk_pclk4>;
181 st,bank-name = "GPIOA";
182 ngpios = <16>;
183 gpio-ranges = <&pinctrl 0 0 16>;
184 };
185
186 gpiob: gpio@50003000 {
187 gpio-controller;
188 #gpio-cells = <2>;
189 interrupt-controller;
190 #interrupt-cells = <2>;
191 reg = <0x1000 0x400>;
192 clocks = <&clk_pclk4>;
193 st,bank-name = "GPIOB";
194 ngpios = <16>;
195 gpio-ranges = <&pinctrl 0 16 16>;
196 };
197
198 gpioc: gpio@50004000 {
199 gpio-controller;
200 #gpio-cells = <2>;
201 interrupt-controller;
202 #interrupt-cells = <2>;
203 reg = <0x2000 0x400>;
204 clocks = <&clk_pclk4>;
205 st,bank-name = "GPIOC";
206 ngpios = <16>;
207 gpio-ranges = <&pinctrl 0 32 16>;
208 };
209
210 gpiod: gpio@50005000 {
211 gpio-controller;
212 #gpio-cells = <2>;
213 interrupt-controller;
214 #interrupt-cells = <2>;
215 reg = <0x3000 0x400>;
216 clocks = <&clk_pclk4>;
217 st,bank-name = "GPIOD";
218 ngpios = <16>;
219 gpio-ranges = <&pinctrl 0 48 16>;
220 };
221
222 gpioe: gpio@50006000 {
223 gpio-controller;
224 #gpio-cells = <2>;
225 interrupt-controller;
226 #interrupt-cells = <2>;
227 reg = <0x4000 0x400>;
228 clocks = <&clk_pclk4>;
229 st,bank-name = "GPIOE";
230 ngpios = <16>;
231 gpio-ranges = <&pinctrl 0 64 16>;
232 };
233
234 gpiof: gpio@50007000 {
235 gpio-controller;
236 #gpio-cells = <2>;
237 interrupt-controller;
238 #interrupt-cells = <2>;
239 reg = <0x5000 0x400>;
240 clocks = <&clk_pclk4>;
241 st,bank-name = "GPIOF";
242 ngpios = <16>;
243 gpio-ranges = <&pinctrl 0 80 16>;
244 };
245
246 gpiog: gpio@50008000 {
247 gpio-controller;
248 #gpio-cells = <2>;
249 interrupt-controller;
250 #interrupt-cells = <2>;
251 reg = <0x6000 0x400>;
252 clocks = <&clk_pclk4>;
253 st,bank-name = "GPIOG";
254 ngpios = <16>;
255 gpio-ranges = <&pinctrl 0 96 16>;
256 };
257
258 gpioh: gpio@50009000 {
259 gpio-controller;
260 #gpio-cells = <2>;
261 interrupt-controller;
262 #interrupt-cells = <2>;
263 reg = <0x7000 0x400>;
264 clocks = <&clk_pclk4>;
265 st,bank-name = "GPIOH";
266 ngpios = <15>;
267 gpio-ranges = <&pinctrl 0 112 15>;
268 };
269
270 gpioi: gpio@5000a000 {
271 gpio-controller;
272 #gpio-cells = <2>;
273 interrupt-controller;
274 #interrupt-cells = <2>;
275 reg = <0x8000 0x400>;
276 clocks = <&clk_pclk4>;
277 st,bank-name = "GPIOI";
278 ngpios = <8>;
279 gpio-ranges = <&pinctrl 0 128 8>;
280 };
281 };
282 };
283};
arch/arm/boot/dts/stm32mp133.dtsi+37−0
@@ -0,0 +1,37 @@
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4 * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
5 */
6
7#include "stm32mp131.dtsi"
8
9/ {
10 soc {
11 m_can1: can@4400e000 {
12 compatible = "bosch,m_can";
13 reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
14 reg-names = "m_can", "message_ram";
15 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
16 <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
17 interrupt-names = "int0", "int1";
18 clocks = <&clk_hse>, <&clk_pll4_r>;
19 clock-names = "hclk", "cclk";
20 bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
21 status = "disabled";
22 };
23
24 m_can2: can@4400f000 {
25 compatible = "bosch,m_can";
26 reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
27 reg-names = "m_can", "message_ram";
28 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
29 <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
30 interrupt-names = "int0", "int1";
31 clocks = <&clk_hse>, <&clk_pll4_r>;
32 clock-names = "hclk", "cclk";
33 bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
34 status = "disabled";
35 };
36 };
37};
arch/arm/boot/dts/stm32mp135.dtsi+12−0
@@ -0,0 +1,12 @@
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4 * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
5 */
6
7#include "stm32mp133.dtsi"
8
9/ {
10 soc {
11 };
12};
arch/arm/boot/dts/stm32mp135f-dk.dts+56−0
@@ -0,0 +1,56 @@
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4 * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
5 */
6
7/dts-v1/;
8
9#include "stm32mp135.dtsi"
10#include "stm32mp13xf.dtsi"
11#include "stm32mp13-pinctrl.dtsi"
12
13/ {
14 model = "STMicroelectronics STM32MP135F-DK Discovery Board";
15 compatible = "st,stm32mp135f-dk", "st,stm32mp135";
16
17 aliases {
18 serial0 = &uart4;
19 };
20
21 memory@c0000000 {
22 device_type = "memory";
23 reg = <0xc0000000 0x20000000>;
24 };
25
26 vdd_sd: vdd-sd {
27 compatible = "regulator-fixed";
28 regulator-name = "vdd_sd";
29 regulator-min-microvolt = <2900000>;
30 regulator-max-microvolt = <2900000>;
31 regulator-always-on;
32 };
33};
34
35&iwdg2 {
36 timeout-sec = <32>;
37 status = "okay";
38};
39
40&sdmmc1 {
41 pinctrl-names = "default", "opendrain";
42 pinctrl-0 = <&sdmmc1_b4_pins_a>;
43 pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
44 broken-cd;
45 disable-wp;
46 st,neg-edge;
47 bus-width = <4>;
48 vmmc-supply = <&vdd_sd>;
49 status = "okay";
50};
51
52&uart4 {
53 pinctrl-names = "default";
54 pinctrl-0 = <&uart4_pins_a>;
55 status = "okay";
56};
arch/arm/boot/dts/stm32mp13xc.dtsi+17−0
@@ -0,0 +1,17 @@
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4 * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
5 */
6
7/ {
8 soc {
9 cryp: crypto@54002000 {
10 compatible = "st,stm32mp1-cryp";
11 reg = <0x54002000 0x400>;
12 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
13 clocks = <&clk_axi>;
14 status = "disabled";
15 };
16 };
17};
arch/arm/boot/dts/stm32mp13xf.dtsi+17−0
@@ -0,0 +1,17 @@
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4 * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
5 */
6
7/ {
8 soc {
9 cryp: crypto@54002000 {
10 compatible = "st,stm32mp1-cryp";
11 reg = <0x54002000 0x400>;
12 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
13 clocks = <&clk_axi>;
14 status = "disabled";
15 };
16 };
17};
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi+4−4
@@ -1179,7 +1179,7 @@ · 1178 unmodified lines
1179 };1179 };
1180 };1180 };
1181 1181
1182 sai2a_pins_c: sai2a-4 {1182 sai2a_pins_c: sai2a-2 {
1183 pins {1183 pins {
1184 pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */1184 pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
1185 <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */1185 <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
@@ -1190,7 +1190,7 @@ · 4 unmodified lines
1190 };1190 };
1191 };1191 };
1192 1192
1193 sai2a_sleep_pins_c: sai2a-5 {1193 sai2a_sleep_pins_c: sai2a-2 {
1194 pins {1194 pins {
1195 pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */1195 pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
1196 <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */1196 <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
@@ -1235,14 +1235,14 @@ · 38 unmodified lines
1235 };1235 };
1236 };1236 };
1237 1237
1238 sai2b_pins_c: sai2a-4 {1238 sai2b_pins_c: sai2b-2 {
1239 pins1 {1239 pins1 {
1240 pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */1240 pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
1241 bias-disable;1241 bias-disable;
1242 };1242 };
1243 };1243 };
1244 1244
1245 sai2b_sleep_pins_c: sai2a-sleep-5 {1245 sai2b_sleep_pins_c: sai2b-sleep-2 {
1246 pins {1246 pins {
1247 pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */1247 pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
1248 };1248 };
arch/arm/boot/dts/stm32mp151.dtsi+9−9
@@ -824,7 +824,7 @@ · 823 unmodified lines
824 #sound-dai-cells = <0>;824 #sound-dai-cells = <0>;
825 825
826 compatible = "st,stm32-sai-sub-a";826 compatible = "st,stm32-sai-sub-a";
827 reg = <0x4 0x1c>;827 reg = <0x4 0x20>;
828 clocks = <&rcc SAI1_K>;828 clocks = <&rcc SAI1_K>;
829 clock-names = "sai_ck";829 clock-names = "sai_ck";
830 dmas = <&dmamux1 87 0x400 0x01>;830 dmas = <&dmamux1 87 0x400 0x01>;
@@ -834,7 +834,7 @@ · 3 unmodified lines
834 sai1b: audio-controller@4400a024 {834 sai1b: audio-controller@4400a024 {
835 #sound-dai-cells = <0>;835 #sound-dai-cells = <0>;
836 compatible = "st,stm32-sai-sub-b";836 compatible = "st,stm32-sai-sub-b";
837 reg = <0x24 0x1c>;837 reg = <0x24 0x20>;
838 clocks = <&rcc SAI1_K>;838 clocks = <&rcc SAI1_K>;
839 clock-names = "sai_ck";839 clock-names = "sai_ck";
840 dmas = <&dmamux1 88 0x400 0x01>;840 dmas = <&dmamux1 88 0x400 0x01>;
@@ -855,7 +855,7 @@ · 14 unmodified lines
855 sai2a: audio-controller@4400b004 {855 sai2a: audio-controller@4400b004 {
856 #sound-dai-cells = <0>;856 #sound-dai-cells = <0>;
857 compatible = "st,stm32-sai-sub-a";857 compatible = "st,stm32-sai-sub-a";
858 reg = <0x4 0x1c>;858 reg = <0x4 0x20>;
859 clocks = <&rcc SAI2_K>;859 clocks = <&rcc SAI2_K>;
860 clock-names = "sai_ck";860 clock-names = "sai_ck";
861 dmas = <&dmamux1 89 0x400 0x01>;861 dmas = <&dmamux1 89 0x400 0x01>;
@@ -865,7 +865,7 @@ · 3 unmodified lines
865 sai2b: audio-controller@4400b024 {865 sai2b: audio-controller@4400b024 {
866 #sound-dai-cells = <0>;866 #sound-dai-cells = <0>;
867 compatible = "st,stm32-sai-sub-b";867 compatible = "st,stm32-sai-sub-b";
868 reg = <0x24 0x1c>;868 reg = <0x24 0x20>;
869 clocks = <&rcc SAI2_K>;869 clocks = <&rcc SAI2_K>;
870 clock-names = "sai_ck";870 clock-names = "sai_ck";
871 dmas = <&dmamux1 90 0x400 0x01>;871 dmas = <&dmamux1 90 0x400 0x01>;
@@ -886,7 +886,7 @@ · 14 unmodified lines
886 sai3a: audio-controller@4400c004 {886 sai3a: audio-controller@4400c004 {
887 #sound-dai-cells = <0>;887 #sound-dai-cells = <0>;
888 compatible = "st,stm32-sai-sub-a";888 compatible = "st,stm32-sai-sub-a";
889 reg = <0x04 0x1c>;889 reg = <0x04 0x20>;
890 clocks = <&rcc SAI3_K>;890 clocks = <&rcc SAI3_K>;
891 clock-names = "sai_ck";891 clock-names = "sai_ck";
892 dmas = <&dmamux1 113 0x400 0x01>;892 dmas = <&dmamux1 113 0x400 0x01>;
@@ -896,7 +896,7 @@ · 3 unmodified lines
896 sai3b: audio-controller@4400c024 {896 sai3b: audio-controller@4400c024 {
897 #sound-dai-cells = <0>;897 #sound-dai-cells = <0>;
898 compatible = "st,stm32-sai-sub-b";898 compatible = "st,stm32-sai-sub-b";
899 reg = <0x24 0x1c>;899 reg = <0x24 0x20>;
900 clocks = <&rcc SAI3_K>;900 clocks = <&rcc SAI3_K>;
901 clock-names = "sai_ck";901 clock-names = "sai_ck";
902 dmas = <&dmamux1 114 0x400 0x01>;902 dmas = <&dmamux1 114 0x400 0x01>;
@@ -1271,7 +1271,7 @@ · 368 unmodified lines
1271 sai4a: audio-controller@50027004 {1271 sai4a: audio-controller@50027004 {
1272 #sound-dai-cells = <0>;1272 #sound-dai-cells = <0>;
1273 compatible = "st,stm32-sai-sub-a";1273 compatible = "st,stm32-sai-sub-a";
1274 reg = <0x04 0x1c>;1274 reg = <0x04 0x20>;
1275 clocks = <&rcc SAI4_K>;1275 clocks = <&rcc SAI4_K>;
1276 clock-names = "sai_ck";1276 clock-names = "sai_ck";
1277 dmas = <&dmamux1 99 0x400 0x01>;1277 dmas = <&dmamux1 99 0x400 0x01>;
@@ -1281,7 +1281,7 @@ · 3 unmodified lines
1281 sai4b: audio-controller@50027024 {1281 sai4b: audio-controller@50027024 {
1282 #sound-dai-cells = <0>;1282 #sound-dai-cells = <0>;
1283 compatible = "st,stm32-sai-sub-b";1283 compatible = "st,stm32-sai-sub-b";
1284 reg = <0x24 0x1c>;1284 reg = <0x24 0x20>;
1285 clocks = <&rcc SAI4_K>;1285 clocks = <&rcc SAI4_K>;
1286 clock-names = "sai_ck";1286 clock-names = "sai_ck";
1287 dmas = <&dmamux1 100 0x400 0x01>;1287 dmas = <&dmamux1 100 0x400 0x01>;
@@ -1452,7 +1452,7 @@ · 164 unmodified lines
1452 usbh_ohci: usb@5800c000 {1452 usbh_ohci: usb@5800c000 {
1453 compatible = "generic-ohci";1453 compatible = "generic-ohci";
1454 reg = <0x5800c000 0x1000>;1454 reg = <0x5800c000 0x1000>;
1455 clocks = <&rcc USBH>;1455 clocks = <&rcc USBH>, <&usbphyc>;
1456 resets = <&rcc USBH_R>;1456 resets = <&rcc USBH_R>;
1457 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;1457 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
1458 status = "disabled";1458 status = "disabled";
arch/arm/boot/dts/stm32mp157c-odyssey.dts+6−0
@@ -22,6 +22,12 @@ · 21 unmodified lines
22 };22 };
23};23};
24 24
25&dcmi {
26 pinctrl-names = "default", "sleep";
27 pinctrl-0 = <&dcmi_pins_b>;
28 pinctrl-1 = <&dcmi_sleep_pins_b>;
29};
30
25&ethernet0 {31&ethernet0 {
26 status = "okay";32 status = "okay";
27 pinctrl-0 = <&ethernet0_rgmii_pins_a>;33 pinctrl-0 = <&ethernet0_rgmii_pins_a>;
arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi+1−1
@@ -202,7 +202,7 @@ · 201 unmodified lines
202 compatible = "jedec,spi-nor";202 compatible = "jedec,spi-nor";
203 reg = <0>;203 reg = <0>;
204 spi-rx-bus-width = <4>;204 spi-rx-bus-width = <4>;
205 spi-max-frequency = <108000000>;205 spi-max-frequency = <50000000>;
206 #address-cells = <1>;206 #address-cells = <1>;
207 #size-cells = <1>;207 #size-cells = <1>;
208 };208 };
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi+1−1
@@ -249,7 +249,7 @@ · 248 unmodified lines
249 stusb1600@28 {249 stusb1600@28 {
250 compatible = "st,stusb1600";250 compatible = "st,stusb1600";
251 reg = <0x28>;251 reg = <0x28>;
252 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;252 interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
253 interrupt-parent = <&gpioi>;253 interrupt-parent = <&gpioi>;
254 pinctrl-names = "default";254 pinctrl-names = "default";
255 pinctrl-0 = <&stusb1600_pins_a>;255 pinctrl-0 = <&stusb1600_pins_a>;
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts+5−6
@@ -91,12 +91,11 @@ · 90 unmodified lines
91 /*91 /*
92 * The A10-Lime is known to be unstable when running at 1008 MHz92 * The A10-Lime is known to be unstable when running at 1008 MHz
93 */93 */
94 operating-points = <94 operating-points =
95 /* kHz uV */95 /* kHz uV */
96 912000 135000096 <912000 1350000>,
97 864000 130000097 <864000 1300000>,
98 624000 125000098 <624000 1250000>;
99 >;
100};99};
101 100
102&de {101&de {
arch/arm/boot/dts/sun4i-a10.dtsi+5−6
@@ -115,13 +115,12 @@ · 114 unmodified lines
115 reg = <0x0>;115 reg = <0x0>;
116 clocks = <&ccu CLK_CPU>;116 clocks = <&ccu CLK_CPU>;
117 clock-latency = <244144>; /* 8 32k periods */117 clock-latency = <244144>; /* 8 32k periods */
118 operating-points = <118 operating-points =
119 /* kHz uV */119 /* kHz uV */
120 1008000 1400000120 <1008000 1400000>,
121 912000 1350000121 <912000 1350000>,
122 864000 1300000122 <864000 1300000>,
123 624000 1250000123 <624000 1250000>;
124 >;
125 #cooling-cells = <2>;124 #cooling-cells = <2>;
126 };125 };
127 };126 };
arch/arm/boot/dts/sun5i-a13.dtsi+7−8
@@ -102,15 +102,14 @@ · 101 unmodified lines
102 102
103&cpu0 {103&cpu0 {
104 clock-latency = <244144>; /* 8 32k periods */104 clock-latency = <244144>; /* 8 32k periods */
105 operating-points = <105 operating-points =
106 /* kHz uV */106 /* kHz uV */
107 1008000 1400000107 <1008000 1400000>,
108 912000 1350000108 <912000 1350000>,
109 864000 1300000109 <864000 1300000>,
110 624000 1200000110 <624000 1200000>,
111 576000 1200000111 <576000 1200000>,
112 432000 1200000112 <432000 1200000>;
113 >;
114 #cooling-cells = <2>;113 #cooling-cells = <2>;
115};114};
116 115
arch/arm/boot/dts/sun6i-a31.dtsi+20−24
@@ -105,13 +105,12 @@ · 104 unmodified lines
105 reg = <0>;105 reg = <0>;
106 clocks = <&ccu CLK_CPU>;106 clocks = <&ccu CLK_CPU>;
107 clock-latency = <244144>; /* 8 32k periods */107 clock-latency = <244144>; /* 8 32k periods */
108 operating-points = <108 operating-points =
109 /* kHz uV */109 /* kHz uV */
110 1008000 1200000110 <1008000 1200000>,
111 864000 1200000111 <864000 1200000>,
112 720000 1100000112 <720000 1100000>,
113 480000 1000000113 <480000 1000000>;
114 >;
115 #cooling-cells = <2>;114 #cooling-cells = <2>;
116 };115 };
117 116
@@ -121,13 +120,12 @@ · 3 unmodified lines
121 reg = <1>;120 reg = <1>;
122 clocks = <&ccu CLK_CPU>;121 clocks = <&ccu CLK_CPU>;
123 clock-latency = <244144>; /* 8 32k periods */122 clock-latency = <244144>; /* 8 32k periods */
124 operating-points = <123 operating-points =
125 /* kHz uV */124 /* kHz uV */
126 1008000 1200000125 <1008000 1200000>,
127 864000 1200000126 <864000 1200000>,
128 720000 1100000127 <720000 1100000>,
129 480000 1000000128 <480000 1000000>;
130 >;
131 #cooling-cells = <2>;129 #cooling-cells = <2>;
132 };130 };
133 131
@@ -137,13 +135,12 @@ · 3 unmodified lines
137 reg = <2>;135 reg = <2>;
138 clocks = <&ccu CLK_CPU>;136 clocks = <&ccu CLK_CPU>;
139 clock-latency = <244144>; /* 8 32k periods */137 clock-latency = <244144>; /* 8 32k periods */
140 operating-points = <138 operating-points =
141 /* kHz uV */139 /* kHz uV */
142 1008000 1200000140 <1008000 1200000>,
143 864000 1200000141 <864000 1200000>,
144 720000 1100000142 <720000 1100000>,
145 480000 1000000143 <480000 1000000>;
146 >;
147 #cooling-cells = <2>;144 #cooling-cells = <2>;
148 };145 };
149 146
@@ -153,13 +150,12 @@ · 3 unmodified lines
153 reg = <3>;150 reg = <3>;
154 clocks = <&ccu CLK_CPU>;151 clocks = <&ccu CLK_CPU>;
155 clock-latency = <244144>; /* 8 32k periods */152 clock-latency = <244144>; /* 8 32k periods */
156 operating-points = <153 operating-points =
157 /* kHz uV */154 /* kHz uV */
158 1008000 1200000155 <1008000 1200000>,
159 864000 1200000156 <864000 1200000>,
160 720000 1100000157 <720000 1100000>,
161 480000 1000000158 <480000 1000000>;
162 >;
163 #cooling-cells = <2>;159 #cooling-cells = <2>;
164 };160 };
165 };161 };
arch/arm/boot/dts/sun7i-a20-bananapi.dts+8−9
@@ -104,16 +104,15 @@ · 103 unmodified lines
104 104
105&cpu0 {105&cpu0 {
106 cpu-supply = <&reg_dcdc2>;106 cpu-supply = <&reg_dcdc2>;
107 operating-points = <107 operating-points =
108 /* kHz uV */108 /* kHz uV */
109 960000 1400000109 <960000 1400000>,
110 912000 1400000110 <912000 1400000>,
111 864000 1350000111 <864000 1350000>,
112 720000 1250000112 <720000 1250000>,
113 528000 1150000113 <528000 1150000>,
114 312000 1100000114 <312000 1100000>,
115 144000 1050000115 <144000 1050000>;
116 >;
117};116};
118 117
119&de {118&de {
arch/arm/boot/dts/sun7i-a20.dtsi+16−18
@@ -106,16 +106,15 @@ · 105 unmodified lines
106 reg = <0>;106 reg = <0>;
107 clocks = <&ccu CLK_CPU>;107 clocks = <&ccu CLK_CPU>;
108 clock-latency = <244144>; /* 8 32k periods */108 clock-latency = <244144>; /* 8 32k periods */
109 operating-points = <109 operating-points =
110 /* kHz uV */110 /* kHz uV */
111 960000 1400000111 <960000 1400000>,
112 912000 1400000112 <912000 1400000>,
113 864000 1300000113 <864000 1300000>,
114 720000 1200000114 <720000 1200000>,
115 528000 1100000115 <528000 1100000>,
116 312000 1000000116 <312000 1000000>,
117 144000 1000000117 <144000 1000000>;
118 >;
119 #cooling-cells = <2>;118 #cooling-cells = <2>;
120 };119 };
121 120
@@ -125,16 +124,15 @@ · 3 unmodified lines
125 reg = <1>;124 reg = <1>;
126 clocks = <&ccu CLK_CPU>;125 clocks = <&ccu CLK_CPU>;
127 clock-latency = <244144>; /* 8 32k periods */126 clock-latency = <244144>; /* 8 32k periods */
128 operating-points = <127 operating-points =
129 /* kHz uV */128 /* kHz uV */
130 960000 1400000129 <960000 1400000>,
131 912000 1400000130 <912000 1400000>,
132 864000 1300000131 <864000 1300000>,
133 720000 1200000132 <720000 1200000>,
134 528000 1100000133 <528000 1100000>,
135 312000 1000000134 <312000 1000000>,
136 144000 1000000135 <144000 1000000>;
137 >;
138 #cooling-cells = <2>;136 #cooling-cells = <2>;
139 };137 };
140 };138 };
arch/arm/boot/dts/sun8i-a33.dtsi+2−2
@@ -46,7 +46,7 @@ · 45 unmodified lines
46#include <dt-bindings/thermal/thermal.h>46#include <dt-bindings/thermal/thermal.h>
47 47
48/ {48/ {
49 cpu0_opp_table: opp_table0 {49 cpu0_opp_table: opp-table-cpu {
50 compatible = "operating-points-v2";50 compatible = "operating-points-v2";
51 opp-shared;51 opp-shared;
52 52
@@ -164,7 +164,7 @@ · 111 unmodified lines
164 io-channels = <&ths>;164 io-channels = <&ths>;
165 };165 };
166 166
167 mali_opp_table: gpu-opp-table {167 mali_opp_table: opp-table-gpu {
168 compatible = "operating-points-v2";168 compatible = "operating-points-v2";
169 169
170 opp-144000000 {170 opp-144000000 {
arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts+1−1
@@ -169,7 +169,7 @@ · 168 unmodified lines
169 status = "okay";169 status = "okay";
170 170
171 touchscreen@38 {171 touchscreen@38 {
172 compatible = "edt,edt-ft5x06";172 compatible = "edt,edt-ft5206";
173 reg = <0x38>;173 reg = <0x38>;
174 interrupt-parent = <&r_pio>;174 interrupt-parent = <&r_pio>;
175 interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */175 interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */
arch/arm/boot/dts/sun8i-a83t.dtsi+2−2
@@ -200,7 +200,7 @@ · 199 unmodified lines
200 status = "disabled";200 status = "disabled";
201 };201 };
202 202
203 cpu0_opp_table: opp_table0 {203 cpu0_opp_table: opp-table-cluster0 {
204 compatible = "operating-points-v2";204 compatible = "operating-points-v2";
205 opp-shared;205 opp-shared;
206 206
@@ -253,7 +253,7 @@ · 46 unmodified lines
253 };253 };
254 };254 };
255 255
256 cpu1_opp_table: opp_table1 {256 cpu1_opp_table: opp-table-cluster1 {
257 compatible = "operating-points-v2";257 compatible = "operating-points-v2";
258 opp-shared;258 opp-shared;
259 259
arch/arm/boot/dts/sun8i-h3.dtsi+2−2
@@ -44,7 +44,7 @@ · 43 unmodified lines
44#include <dt-bindings/thermal/thermal.h>44#include <dt-bindings/thermal/thermal.h>
45 45
46/ {46/ {
47 cpu0_opp_table: opp_table0 {47 cpu0_opp_table: opp-table-cpu {
48 compatible = "operating-points-v2";48 compatible = "operating-points-v2";
49 opp-shared;49 opp-shared;
50 50
@@ -112,7 +112,7 @@ · 61 unmodified lines
112 };112 };
113 };113 };
114 114
115 gpu_opp_table: gpu-opp-table {115 gpu_opp_table: opp-table-gpu {
116 compatible = "operating-points-v2";116 compatible = "operating-points-v2";
117 117
118 opp-120000000 {118 opp-120000000 {
arch/arm/boot/dts/sun8i-r40.dtsi+39−0
@@ -736,6 +736,45 @@ · 735 unmodified lines
736 status = "disabled";736 status = "disabled";
737 };737 };
738 738
739 i2s0: i2s@1c22000 {
740 #sound-dai-cells = <0>;
741 compatible = "allwinner,sun8i-r40-i2s",
742 "allwinner,sun8i-h3-i2s";
743 reg = <0x01c22000 0x400>;
744 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
745 clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
746 clock-names = "apb", "mod";
747 resets = <&ccu RST_BUS_I2S0>;
748 dmas = <&dma 3>, <&dma 3>;
749 dma-names = "rx", "tx";
750 };
751
752 i2s1: i2s@1c22400 {
753 #sound-dai-cells = <0>;
754 compatible = "allwinner,sun8i-r40-i2s",
755 "allwinner,sun8i-h3-i2s";
756 reg = <0x01c22400 0x400>;
757 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
758 clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
759 clock-names = "apb", "mod";
760 resets = <&ccu RST_BUS_I2S1>;
761 dmas = <&dma 4>, <&dma 4>;
762 dma-names = "rx", "tx";
763 };
764
765 i2s2: i2s@1c22800 {
766 #sound-dai-cells = <0>;
767 compatible = "allwinner,sun8i-r40-i2s",
768 "allwinner,sun8i-h3-i2s";
769 reg = <0x01c22800 0x400>;
770 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
771 clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
772 clock-names = "apb", "mod";
773 resets = <&ccu RST_BUS_I2S2>;
774 dmas = <&dma 6>, <&dma 6>;
775 dma-names = "rx", "tx";
776 };
777
739 ths: thermal-sensor@1c24c00 {778 ths: thermal-sensor@1c24c00 {
740 compatible = "allwinner,sun8i-r40-ths";779 compatible = "allwinner,sun8i-r40-ths";
741 reg = <0x01c24c00 0x100>;780 reg = <0x01c24c00 0x100>;
arch/arm/boot/dts/sun8i-v3-sl631.dtsi+1−1
@@ -115,7 +115,7 @@ · 114 unmodified lines
115&spi0 {115&spi0 {
116 status = "okay";116 status = "okay";
117 117
118 spi-flash@0 {118 flash@0 {
119 reg = <0>;119 reg = <0>;
120 compatible = "jedec,spi-nor";120 compatible = "jedec,spi-nor";
121 spi-max-frequency = <50000000>;121 spi-max-frequency = <50000000>;
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts+1−1
@@ -87,7 +87,7 @@ · 86 unmodified lines
87 };87 };
88 88
89 vga-dac {89 vga-dac {
90 compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac";90 compatible = "corpro,gm7123", "adi,adv7123";
91 vdd-supply = <&reg_dcdc1>;91 vdd-supply = <&reg_dcdc1>;
92 92
93 ports {93 ports {
arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi+1−1
@@ -156,7 +156,7 @@ · 155 unmodified lines
156&spi0 {156&spi0 {
157 status = "okay";157 status = "okay";
158 158
159 spiflash@0 {159 flash@0 {
160 compatible = "jedec,spi-nor";160 compatible = "jedec,spi-nor";
161 reg = <0>;161 reg = <0>;
162 spi-max-frequency = <50000000>;162 spi-max-frequency = <50000000>;
arch/arm/boot/dts/tegra114.dtsi+6−2
@@ -691,7 +691,7 @@ · 690 unmodified lines
691 };691 };
692 692
693 usb@7d000000 {693 usb@7d000000 {
694 compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";694 compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci";
695 reg = <0x7d000000 0x4000>;695 reg = <0x7d000000 0x4000>;
696 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;696 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
697 phy_type = "utmi";697 phy_type = "utmi";
@@ -706,6 +706,7 @@ · 8 unmodified lines
706 compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";706 compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
707 reg = <0x7d000000 0x4000>,707 reg = <0x7d000000 0x4000>,
708 <0x7d000000 0x4000>;708 <0x7d000000 0x4000>;
709 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
709 phy_type = "utmi";710 phy_type = "utmi";
710 clocks = <&tegra_car TEGRA114_CLK_USBD>,711 clocks = <&tegra_car TEGRA114_CLK_USBD>,
711 <&tegra_car TEGRA114_CLK_PLL_U>,712 <&tegra_car TEGRA114_CLK_PLL_U>,
@@ -725,11 +726,12 @@ · 13 unmodified lines
725 nvidia,hsdiscon-level = <5>;726 nvidia,hsdiscon-level = <5>;
726 nvidia,xcvr-hsslew = <12>;727 nvidia,xcvr-hsslew = <12>;
727 nvidia,has-utmi-pad-registers;728 nvidia,has-utmi-pad-registers;
729 nvidia,pmc = <&tegra_pmc 0>;
728 status = "disabled";730 status = "disabled";
729 };731 };
730 732
731 usb@7d008000 {733 usb@7d008000 {
732 compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";734 compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci";
733 reg = <0x7d008000 0x4000>;735 reg = <0x7d008000 0x4000>;
734 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;736 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
735 phy_type = "utmi";737 phy_type = "utmi";
@@ -744,6 +746,7 @@ · 8 unmodified lines
744 compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";746 compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
745 reg = <0x7d008000 0x4000>,747 reg = <0x7d008000 0x4000>,
746 <0x7d000000 0x4000>;748 <0x7d000000 0x4000>;
749 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
747 phy_type = "utmi";750 phy_type = "utmi";
748 clocks = <&tegra_car TEGRA114_CLK_USB3>,751 clocks = <&tegra_car TEGRA114_CLK_USB3>,
749 <&tegra_car TEGRA114_CLK_PLL_U>,752 <&tegra_car TEGRA114_CLK_PLL_U>,
@@ -762,6 +765,7 @@ · 12 unmodified lines
762 nvidia,hssquelch-level = <2>;765 nvidia,hssquelch-level = <2>;
763 nvidia,hsdiscon-level = <5>;766 nvidia,hsdiscon-level = <5>;
764 nvidia,xcvr-hsslew = <12>;767 nvidia,xcvr-hsslew = <12>;
768 nvidia,pmc = <&tegra_pmc 2>;
765 status = "disabled";769 status = "disabled";
766 };770 };
767 771
arch/arm/boot/dts/tegra124.dtsi+9−3
@@ -1079,7 +1079,7 @@ · 1078 unmodified lines
1079 };1079 };
1080 1080
1081 usb@7d000000 {1081 usb@7d000000 {
1082 compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";1082 compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
1083 reg = <0x0 0x7d000000 0x0 0x4000>;1083 reg = <0x0 0x7d000000 0x0 0x4000>;
1084 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;1084 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
1085 phy_type = "utmi";1085 phy_type = "utmi";
@@ -1094,6 +1094,7 @@ · 8 unmodified lines
1094 compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";1094 compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
1095 reg = <0x0 0x7d000000 0x0 0x4000>,1095 reg = <0x0 0x7d000000 0x0 0x4000>,
1096 <0x0 0x7d000000 0x0 0x4000>;1096 <0x0 0x7d000000 0x0 0x4000>;
1097 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
1097 phy_type = "utmi";1098 phy_type = "utmi";
1098 clocks = <&tegra_car TEGRA124_CLK_USBD>,1099 clocks = <&tegra_car TEGRA124_CLK_USBD>,
1099 <&tegra_car TEGRA124_CLK_PLL_U>,1100 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1113,11 +1114,12 @@ · 13 unmodified lines
1113 nvidia,hsdiscon-level = <5>;1114 nvidia,hsdiscon-level = <5>;
1114 nvidia,xcvr-hsslew = <12>;1115 nvidia,xcvr-hsslew = <12>;
1115 nvidia,has-utmi-pad-registers;1116 nvidia,has-utmi-pad-registers;
1117 nvidia,pmc = <&tegra_pmc 0>;
1116 status = "disabled";1118 status = "disabled";
1117 };1119 };
1118 1120
1119 usb@7d004000 {1121 usb@7d004000 {
1120 compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";1122 compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
1121 reg = <0x0 0x7d004000 0x0 0x4000>;1123 reg = <0x0 0x7d004000 0x0 0x4000>;
1122 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;1124 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
1123 phy_type = "utmi";1125 phy_type = "utmi";
@@ -1132,6 +1134,7 @@ · 8 unmodified lines
1132 compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";1134 compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
1133 reg = <0x0 0x7d004000 0x0 0x4000>,1135 reg = <0x0 0x7d004000 0x0 0x4000>,
1134 <0x0 0x7d000000 0x0 0x4000>;1136 <0x0 0x7d000000 0x0 0x4000>;
1137 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
1135 phy_type = "utmi";1138 phy_type = "utmi";
1136 clocks = <&tegra_car TEGRA124_CLK_USB2>,1139 clocks = <&tegra_car TEGRA124_CLK_USB2>,
1137 <&tegra_car TEGRA124_CLK_PLL_U>,1140 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1150,11 +1153,12 @@ · 12 unmodified lines
1150 nvidia,hssquelch-level = <2>;1153 nvidia,hssquelch-level = <2>;
1151 nvidia,hsdiscon-level = <5>;1154 nvidia,hsdiscon-level = <5>;
1152 nvidia,xcvr-hsslew = <12>;1155 nvidia,xcvr-hsslew = <12>;
1156 nvidia,pmc = <&tegra_pmc 1>;
1153 status = "disabled";1157 status = "disabled";
1154 };1158 };
1155 1159
1156 usb@7d008000 {1160 usb@7d008000 {
1157 compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";1161 compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
1158 reg = <0x0 0x7d008000 0x0 0x4000>;1162 reg = <0x0 0x7d008000 0x0 0x4000>;
1159 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;1163 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
1160 phy_type = "utmi";1164 phy_type = "utmi";
@@ -1169,6 +1173,7 @@ · 8 unmodified lines
1169 compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";1173 compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
1170 reg = <0x0 0x7d008000 0x0 0x4000>,1174 reg = <0x0 0x7d008000 0x0 0x4000>,
1171 <0x0 0x7d000000 0x0 0x4000>;1175 <0x0 0x7d000000 0x0 0x4000>;
1176 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
1172 phy_type = "utmi";1177 phy_type = "utmi";
1173 clocks = <&tegra_car TEGRA124_CLK_USB3>,1178 clocks = <&tegra_car TEGRA124_CLK_USB3>,
1174 <&tegra_car TEGRA124_CLK_PLL_U>,1179 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1187,6 +1192,7 @@ · 12 unmodified lines
1187 nvidia,hssquelch-level = <2>;1192 nvidia,hssquelch-level = <2>;
1188 nvidia,hsdiscon-level = <5>;1193 nvidia,hsdiscon-level = <5>;
1189 nvidia,xcvr-hsslew = <12>;1194 nvidia,xcvr-hsslew = <12>;
1195 nvidia,pmc = <&tegra_pmc 2>;
1190 status = "disabled";1196 status = "disabled";
1191 };1197 };
1192 1198
arch/arm/boot/dts/tegra20-acer-a500-picasso.dts+5−2
@@ -393,6 +393,10 @@ · 392 unmodified lines
393 bluetooth {393 bluetooth {
394 compatible = "brcm,bcm4329-bt";394 compatible = "brcm,bcm4329-bt";
395 395
396 interrupt-parent = <&gpio>;
397 interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
398 interrupt-names = "host-wakeup";
399
396 /* PLLP 216MHz / 16 / 4 */400 /* PLLP 216MHz / 16 / 4 */
397 max-speed = <3375000>;401 max-speed = <3375000>;
398 402
@@ -403,7 +407,6 @@ · 4 unmodified lines
403 vddio-supply = <&vdd_1v8_sys>;407 vddio-supply = <&vdd_1v8_sys>;
404 408
405 device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;409 device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
406 host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
407 shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;410 shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
408 };411 };
409 };412 };
@@ -543,7 +546,7 @@ · 133 unmodified lines
543 status = "okay";546 status = "okay";
544 547
545 magnetometer@c {548 magnetometer@c {
546 compatible = "ak,ak8975";549 compatible = "asahi-kasei,ak8975";
547 reg = <0x0c>;550 reg = <0x0c>;
548 551
549 interrupt-parent = <&gpio>;552 interrupt-parent = <&gpio>;
arch/arm/boot/dts/tegra20-paz00.dts+0−2
@@ -573,8 +573,6 @@ · 572 unmodified lines
573 573
574 brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;574 brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
575 default-brightness-level = <10>;575 default-brightness-level = <10>;
576
577 backlight-boot-off;
578 };576 };
579 577
580 clk32k_in: clock@0 {578 clk32k_in: clock@0 {
arch/arm/boot/dts/tegra20.dtsi+9−4
@@ -744,11 +744,10 @@ · 743 unmodified lines
744 };744 };
745 745
746 usb@c5000000 {746 usb@c5000000 {
747 compatible = "nvidia,tegra20-ehci", "usb-ehci";747 compatible = "nvidia,tegra20-ehci";
748 reg = <0xc5000000 0x4000>;748 reg = <0xc5000000 0x4000>;
749 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;749 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
750 phy_type = "utmi";750 phy_type = "utmi";
751 nvidia,has-legacy-mode;
752 clocks = <&tegra_car TEGRA20_CLK_USBD>;751 clocks = <&tegra_car TEGRA20_CLK_USBD>;
753 resets = <&tegra_car 22>;752 resets = <&tegra_car 22>;
754 reset-names = "usb";753 reset-names = "usb";
@@ -761,6 +760,7 @@ · 6 unmodified lines
761 compatible = "nvidia,tegra20-usb-phy";760 compatible = "nvidia,tegra20-usb-phy";
762 reg = <0xc5000000 0x4000>,761 reg = <0xc5000000 0x4000>,
763 <0xc5000000 0x4000>;762 <0xc5000000 0x4000>;
763 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
764 phy_type = "utmi";764 phy_type = "utmi";
765 clocks = <&tegra_car TEGRA20_CLK_USBD>,765 clocks = <&tegra_car TEGRA20_CLK_USBD>,
766 <&tegra_car TEGRA20_CLK_PLL_U>,766 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -779,11 +779,12 @@ · 12 unmodified lines
779 nvidia,xcvr-lsfslew = <1>;779 nvidia,xcvr-lsfslew = <1>;
780 nvidia,xcvr-lsrslew = <1>;780 nvidia,xcvr-lsrslew = <1>;
781 nvidia,has-utmi-pad-registers;781 nvidia,has-utmi-pad-registers;
782 nvidia,pmc = <&tegra_pmc 0>;
782 status = "disabled";783 status = "disabled";
783 };784 };
784 785
785 usb@c5004000 {786 usb@c5004000 {
786 compatible = "nvidia,tegra20-ehci", "usb-ehci";787 compatible = "nvidia,tegra20-ehci";
787 reg = <0xc5004000 0x4000>;788 reg = <0xc5004000 0x4000>;
788 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;789 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
789 phy_type = "ulpi";790 phy_type = "ulpi";
@@ -797,6 +798,7 @@ · 7 unmodified lines
797 phy2: usb-phy@c5004000 {798 phy2: usb-phy@c5004000 {
798 compatible = "nvidia,tegra20-usb-phy";799 compatible = "nvidia,tegra20-usb-phy";
799 reg = <0xc5004000 0x4000>;800 reg = <0xc5004000 0x4000>;
801 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
800 phy_type = "ulpi";802 phy_type = "ulpi";
801 clocks = <&tegra_car TEGRA20_CLK_USB2>,803 clocks = <&tegra_car TEGRA20_CLK_USB2>,
802 <&tegra_car TEGRA20_CLK_PLL_U>,804 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -805,11 +807,12 @@ · 2 unmodified lines
805 resets = <&tegra_car 58>, <&tegra_car 22>;807 resets = <&tegra_car 58>, <&tegra_car 22>;
806 reset-names = "usb", "utmi-pads";808 reset-names = "usb", "utmi-pads";
807 #phy-cells = <0>;809 #phy-cells = <0>;
810 nvidia,pmc = <&tegra_pmc 1>;
808 status = "disabled";811 status = "disabled";
809 };812 };
810 813
811 usb@c5008000 {814 usb@c5008000 {
812 compatible = "nvidia,tegra20-ehci", "usb-ehci";815 compatible = "nvidia,tegra20-ehci";
813 reg = <0xc5008000 0x4000>;816 reg = <0xc5008000 0x4000>;
814 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;817 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
815 phy_type = "utmi";818 phy_type = "utmi";
@@ -824,6 +827,7 @@ · 8 unmodified lines
824 compatible = "nvidia,tegra20-usb-phy";827 compatible = "nvidia,tegra20-usb-phy";
825 reg = <0xc5008000 0x4000>,828 reg = <0xc5008000 0x4000>,
826 <0xc5000000 0x4000>;829 <0xc5000000 0x4000>;
830 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
827 phy_type = "utmi";831 phy_type = "utmi";
828 clocks = <&tegra_car TEGRA20_CLK_USB3>,832 clocks = <&tegra_car TEGRA20_CLK_USB3>,
829 <&tegra_car TEGRA20_CLK_PLL_U>,833 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -840,6 +844,7 @@ · 10 unmodified lines
840 nvidia,xcvr-setup = <9>;844 nvidia,xcvr-setup = <9>;
841 nvidia,xcvr-lsfslew = <2>;845 nvidia,xcvr-lsfslew = <2>;
842 nvidia,xcvr-lsrslew = <2>;846 nvidia,xcvr-lsrslew = <2>;
847 nvidia,pmc = <&tegra_pmc 2>;
843 status = "disabled";848 status = "disabled";
844 };849 };
845 850
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi+27−3
@@ -819,6 +819,10 @@ · 818 unmodified lines
819 bluetooth {819 bluetooth {
820 compatible = "brcm,bcm4330-bt";820 compatible = "brcm,bcm4330-bt";
821 821
822 interrupt-parent = <&gpio>;
823 interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
824 interrupt-names = "host-wakeup";
825
822 max-speed = <4000000>;826 max-speed = <4000000>;
823 827
824 clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;828 clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
@@ -828,7 +832,6 @@ · 3 unmodified lines
828 vddio-supply = <&vdd_1v8>;832 vddio-supply = <&vdd_1v8>;
829 833
830 device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;834 device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
831 host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
832 shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;835 shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
833 };836 };
834 };837 };
@@ -941,9 +944,29 @@ · 106 unmodified lines
941 interrupts = <TEGRA_GPIO(V, 1) IRQ_TYPE_EDGE_BOTH>;944 interrupts = <TEGRA_GPIO(V, 1) IRQ_TYPE_EDGE_BOTH>;
942 945
943 summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW>;946 summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW>;
947 summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>;
944 summit,enable-usb-charging;948 summit,enable-usb-charging;
945 949
946 monitored-battery = <&battery_cell>;950 monitored-battery = <&battery_cell>;
951
952 usb_vbus: usb-vbus {
953 regulator-name = "usb_vbus";
954 regulator-min-microvolt = <5000000>;
955 regulator-max-microvolt = <5000000>;
956 regulator-min-microamp = <750000>;
957 regulator-max-microamp = <750000>;
958
959 /*
960 * SMB347 INOK input pin is connected to PMIC's
961 * ACOK output, which is fixed to ACTIVE_LOW as
962 * long as battery voltage is in a good range.
963 *
964 * Active INOK disables SMB347 output, so polarity
965 * needs to be toggled when we want to get the
966 * output.
967 */
968 summit,needs-inok-toggle;
969 };
947 };970 };
948 };971 };
949 972
@@ -1016,12 +1039,13 @@ · 66 unmodified lines
1016 usb@7d000000 {1039 usb@7d000000 {
1017 compatible = "nvidia,tegra30-udc";1040 compatible = "nvidia,tegra30-udc";
1018 status = "okay";1041 status = "okay";
1019 dr_mode = "peripheral";1042 dr_mode = "otg";
1043 vbus-supply = <&usb_vbus>;
1020 };1044 };
1021 1045
1022 usb-phy@7d000000 {1046 usb-phy@7d000000 {
1023 status = "okay";1047 status = "okay";
1024 dr_mode = "peripheral";1048 dr_mode = "otg";
1025 nvidia,hssync-start-delay = <0>;1049 nvidia,hssync-start-delay = <0>;
1026 nvidia,xcvr-lsfslew = <2>;1050 nvidia,xcvr-lsfslew = <2>;
1027 nvidia,xcvr-lsrslew = <2>;1051 nvidia,xcvr-lsrslew = <2>;
arch/arm/boot/dts/tegra30-ouya.dts+4−1
@@ -93,6 +93,10 @@ · 92 unmodified lines
93 bluetooth {93 bluetooth {
94 compatible = "brcm,bcm4330-bt";94 compatible = "brcm,bcm4330-bt";
95 95
96 interrupt-parent = <&gpio>;
97 interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
98 interrupt-names = "host-wakeup";
99
96 max-speed = <4000000>;100 max-speed = <4000000>;
97 101
98 clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;102 clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
@@ -103,7 +107,6 @@ · 4 unmodified lines
103 107
104 shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;108 shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
105 device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;109 device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
106 host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
107 };110 };
108 };111 };
109 112
arch/arm/boot/dts/tegra30.dtsi+9−3
@@ -958,7 +958,7 @@ · 957 unmodified lines
958 };958 };
959 959
960 usb@7d000000 {960 usb@7d000000 {
961 compatible = "nvidia,tegra30-ehci", "usb-ehci";961 compatible = "nvidia,tegra30-ehci";
962 reg = <0x7d000000 0x4000>;962 reg = <0x7d000000 0x4000>;
963 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;963 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
964 phy_type = "utmi";964 phy_type = "utmi";
@@ -974,6 +974,7 @@ · 9 unmodified lines
974 compatible = "nvidia,tegra30-usb-phy";974 compatible = "nvidia,tegra30-usb-phy";
975 reg = <0x7d000000 0x4000>,975 reg = <0x7d000000 0x4000>,
976 <0x7d000000 0x4000>;976 <0x7d000000 0x4000>;
977 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
977 phy_type = "utmi";978 phy_type = "utmi";
978 clocks = <&tegra_car TEGRA30_CLK_USBD>,979 clocks = <&tegra_car TEGRA30_CLK_USBD>,
979 <&tegra_car TEGRA30_CLK_PLL_U>,980 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -994,11 +995,12 @@ · 14 unmodified lines
994 nvidia,hssquelch-level = <2>;995 nvidia,hssquelch-level = <2>;
995 nvidia,hsdiscon-level = <5>;996 nvidia,hsdiscon-level = <5>;
996 nvidia,has-utmi-pad-registers;997 nvidia,has-utmi-pad-registers;
998 nvidia,pmc = <&tegra_pmc 0>;
997 status = "disabled";999 status = "disabled";
998 };1000 };
999 1001
1000 usb@7d004000 {1002 usb@7d004000 {
1001 compatible = "nvidia,tegra30-ehci", "usb-ehci";1003 compatible = "nvidia,tegra30-ehci";
1002 reg = <0x7d004000 0x4000>;1004 reg = <0x7d004000 0x4000>;
1003 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;1005 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
1004 phy_type = "utmi";1006 phy_type = "utmi";
@@ -1013,6 +1015,7 @@ · 8 unmodified lines
1013 compatible = "nvidia,tegra30-usb-phy";1015 compatible = "nvidia,tegra30-usb-phy";
1014 reg = <0x7d004000 0x4000>,1016 reg = <0x7d004000 0x4000>,
1015 <0x7d000000 0x4000>;1017 <0x7d000000 0x4000>;
1018 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
1016 phy_type = "utmi";1019 phy_type = "utmi";
1017 clocks = <&tegra_car TEGRA30_CLK_USB2>,1020 clocks = <&tegra_car TEGRA30_CLK_USB2>,
1018 <&tegra_car TEGRA30_CLK_PLL_U>,1021 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1032,11 +1035,12 @@ · 13 unmodified lines
1032 nvidia,xcvr-hsslew = <32>;1035 nvidia,xcvr-hsslew = <32>;
1033 nvidia,hssquelch-level = <2>;1036 nvidia,hssquelch-level = <2>;
1034 nvidia,hsdiscon-level = <5>;1037 nvidia,hsdiscon-level = <5>;
1038 nvidia,pmc = <&tegra_pmc 2>;
1035 status = "disabled";1039 status = "disabled";
1036 };1040 };
1037 1041
1038 usb@7d008000 {1042 usb@7d008000 {
1039 compatible = "nvidia,tegra30-ehci", "usb-ehci";1043 compatible = "nvidia,tegra30-ehci";
1040 reg = <0x7d008000 0x4000>;1044 reg = <0x7d008000 0x4000>;
1041 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;1045 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
1042 phy_type = "utmi";1046 phy_type = "utmi";
@@ -1051,6 +1055,7 @@ · 8 unmodified lines
1051 compatible = "nvidia,tegra30-usb-phy";1055 compatible = "nvidia,tegra30-usb-phy";
1052 reg = <0x7d008000 0x4000>,1056 reg = <0x7d008000 0x4000>,
1053 <0x7d000000 0x4000>;1057 <0x7d000000 0x4000>;
1058 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
1054 phy_type = "utmi";1059 phy_type = "utmi";
1055 clocks = <&tegra_car TEGRA30_CLK_USB3>,1060 clocks = <&tegra_car TEGRA30_CLK_USB3>,
1056 <&tegra_car TEGRA30_CLK_PLL_U>,1061 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1070,6 +1075,7 @@ · 13 unmodified lines
1070 nvidia,xcvr-hsslew = <32>;1075 nvidia,xcvr-hsslew = <32>;
1071 nvidia,hssquelch-level = <2>;1076 nvidia,hssquelch-level = <2>;
1072 nvidia,hsdiscon-level = <5>;1077 nvidia,hsdiscon-level = <5>;
1078 nvidia,pmc = <&tegra_pmc 1>;
1073 status = "disabled";1079 status = "disabled";
1074 };1080 };
1075 1081
arch/arm/boot/dts/versatile-ab-ib2.dts+5−1
@@ -13,9 +13,13 @@ · 12 unmodified lines
13 syscon@27000000 {13 syscon@27000000 {
14 compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd";14 compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd";
15 reg = <0x27000000 0x4>;15 reg = <0x27000000 0x4>;
16 ranges = <0x0 0x27000000 0x4>;
17 #address-cells = <1>;
18 #size-cells = <1>;
16 19
17 led@00.4 {20 led@0,4 {
18 compatible = "register-bit-led";21 compatible = "register-bit-led";
22 reg = <0x00 0x04>;
19 offset = <0x00>;23 offset = <0x00>;
20 mask = <0x10>;24 mask = <0x10>;
21 label = "versatile-ib2:0";25 label = "versatile-ib2:0";
arch/arm/boot/dts/versatile-ab.dts+19−8
@@ -70,61 +70,72 @@ · 69 unmodified lines
70 core-module@10000000 {70 core-module@10000000 {
71 compatible = "arm,core-module-versatile", "syscon", "simple-mfd";71 compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
72 reg = <0x10000000 0x200>;72 reg = <0x10000000 0x200>;
73 ranges = <0x0 0x10000000 0x200>;
74 #address-cells = <1>;
75 #size-cells = <1>;
73 76
74 led@08.0 {77 led@8,0 {
75 compatible = "register-bit-led";78 compatible = "register-bit-led";
79 reg = <0x08 0x04>;
76 offset = <0x08>;80 offset = <0x08>;
77 mask = <0x01>;81 mask = <0x01>;
78 label = "versatile:0";82 label = "versatile:0";
79 linux,default-trigger = "heartbeat";83 linux,default-trigger = "heartbeat";
80 default-state = "on";84 default-state = "on";
81 };85 };
82 led@08.1 {86 led@8,1 {
83 compatible = "register-bit-led";87 compatible = "register-bit-led";
88 reg = <0x08 0x04>;
84 offset = <0x08>;89 offset = <0x08>;
85 mask = <0x02>;90 mask = <0x02>;
86 label = "versatile:1";91 label = "versatile:1";
87 linux,default-trigger = "mmc0";92 linux,default-trigger = "mmc0";
88 default-state = "off";93 default-state = "off";
89 };94 };
90 led@08.2 {95 led@8,2 {
91 compatible = "register-bit-led";96 compatible = "register-bit-led";
97 reg = <0x08 0x04>;
92 offset = <0x08>;98 offset = <0x08>;
93 mask = <0x04>;99 mask = <0x04>;
94 label = "versatile:2";100 label = "versatile:2";
95 linux,default-trigger = "cpu0";101 linux,default-trigger = "cpu0";
96 default-state = "off";102 default-state = "off";
97 };103 };
98 led@08.3 {104 led@8,3 {
99 compatible = "register-bit-led";105 compatible = "register-bit-led";
106 reg = <0x08 0x04>;
100 offset = <0x08>;107 offset = <0x08>;
101 mask = <0x08>;108 mask = <0x08>;
102 label = "versatile:3";109 label = "versatile:3";
103 default-state = "off";110 default-state = "off";
104 };111 };
105 led@08.4 {112 led@8,4 {
106 compatible = "register-bit-led";113 compatible = "register-bit-led";
114 reg = <0x08 0x04>;
107 offset = <0x08>;115 offset = <0x08>;
108 mask = <0x10>;116 mask = <0x10>;
109 label = "versatile:4";117 label = "versatile:4";
110 default-state = "off";118 default-state = "off";
111 };119 };
112 led@08.5 {120 led@8,5 {
113 compatible = "register-bit-led";121 compatible = "register-bit-led";
122 reg = <0x08 0x04>;
114 offset = <0x08>;123 offset = <0x08>;
115 mask = <0x20>;124 mask = <0x20>;
116 label = "versatile:5";125 label = "versatile:5";
117 default-state = "off";126 default-state = "off";
118 };127 };
119 led@08.6 {128 led@8,6 {
120 compatible = "register-bit-led";129 compatible = "register-bit-led";
130 reg = <0x08 0x04>;
121 offset = <0x08>;131 offset = <0x08>;
122 mask = <0x40>;132 mask = <0x40>;
123 label = "versatile:6";133 label = "versatile:6";
124 default-state = "off";134 default-state = "off";
125 };135 };
126 led@08.7 {136 led@8,7 {
127 compatible = "register-bit-led";137 compatible = "register-bit-led";
138 reg = <0x08 0x04>;
128 offset = <0x08>;139 offset = <0x08>;
129 mask = <0x80>;140 mask = <0x80>;
130 label = "versatile:7";141 label = "versatile:7";
arch/arm/mach-qcom/Kconfig+10−0
@@ -21,6 +21,16 @@ config ARCH_MSM8X60 · 20 unmodified lines
21 bool "Enable support for MSM8X60"21 bool "Enable support for MSM8X60"
22 select CLKSRC_QCOM22 select CLKSRC_QCOM
23 23
24config ARCH_MSM8916
25 bool "Enable support for MSM8916"
26 select HAVE_ARM_ARCH_TIMER
27 help
28 Enable support for the Qualcomm Snapdragon 410 (MSM8916/APQ8016).
29
30 Note that ARM64 is the main supported architecture for MSM8916.
31 The ARM32 option is intended for a few devices with signed firmware
32 that does not allow booting ARM64 kernels.
33
24config ARCH_MSM896034config ARCH_MSM8960
25 bool "Enable support for MSM8960"35 bool "Enable support for MSM8960"
26 select CLKSRC_QCOM36 select CLKSRC_QCOM
arch/arm64/boot/dts/allwinner/axp803.dtsi+5−5
@@ -10,7 +10,7 @@ · 9 unmodified lines
10 interrupt-controller;10 interrupt-controller;
11 #interrupt-cells = <1>;11 #interrupt-cells = <1>;
12 12
13 ac_power_supply: ac-power-supply {13 ac_power_supply: ac-power {
14 compatible = "x-powers,axp803-ac-power-supply",14 compatible = "x-powers,axp803-ac-power-supply",
15 "x-powers,axp813-ac-power-supply";15 "x-powers,axp813-ac-power-supply";
16 status = "disabled";16 status = "disabled";
@@ -26,18 +26,18 @@ · 9 unmodified lines
26 gpio-controller;26 gpio-controller;
27 #gpio-cells = <2>;27 #gpio-cells = <2>;
28 28
29 gpio0_ldo: gpio0-ldo {29 gpio0_ldo: gpio0-ldo-pin {
30 pins = "GPIO0";30 pins = "GPIO0";
31 function = "ldo";31 function = "ldo";
32 };32 };
33 33
34 gpio1_ldo: gpio1-ldo {34 gpio1_ldo: gpio1-ldo-pin {
35 pins = "GPIO1";35 pins = "GPIO1";
36 function = "ldo";36 function = "ldo";
37 };37 };
38 };38 };
39 39
40 battery_power_supply: battery-power-supply {40 battery_power_supply: battery-power {
41 compatible = "x-powers,axp803-battery-power-supply",41 compatible = "x-powers,axp803-battery-power-supply",
42 "x-powers,axp813-battery-power-supply";42 "x-powers,axp813-battery-power-supply";
43 status = "disabled";43 status = "disabled";
@@ -147,7 +147,7 @@ · 103 unmodified lines
147 };147 };
148 };148 };
149 149
150 usb_power_supply: usb-power-supply {150 usb_power_supply: usb-power {
151 compatible = "x-powers,axp803-usb-power-supply",151 compatible = "x-powers,axp803-usb-power-supply",
152 "x-powers,axp813-usb-power-supply";152 "x-powers,axp813-usb-power-supply";
153 status = "disabled";153 status = "disabled";
arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi+3−3
@@ -343,19 +343,19 @@ · 342 unmodified lines
343 };343 };
344 344
345 thermal-zones {345 thermal-zones {
346 cpu-thermal-zone {346 cpu-thermal {
347 polling-delay-passive = <0>;347 polling-delay-passive = <0>;
348 polling-delay = <0>;348 polling-delay = <0>;
349 thermal-sensors = <&ths 0>;349 thermal-sensors = <&ths 0>;
350 };350 };
351 351
352 ddr-thermal-zone {352 ddr-thermal {
353 polling-delay-passive = <0>;353 polling-delay-passive = <0>;
354 polling-delay = <0>;354 polling-delay = <0>;
355 thermal-sensors = <&ths 2>;355 thermal-sensors = <&ths 2>;
356 };356 };
357 357
358 gpu-thermal-zone {358 gpu-thermal {
359 polling-delay-passive = <0>;359 polling-delay-passive = <0>;
360 polling-delay = <0>;360 polling-delay = <0>;
361 thermal-sensors = <&ths 1>;361 thermal-sensors = <&ths 1>;
arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi+1−1
@@ -4,7 +4,7 @@ · 3 unmodified lines
4 */4 */
5 5
6/ {6/ {
7 cpu0_opp_table: opp_table0 {7 cpu0_opp_table: opp-table-cpu {
8 compatible = "operating-points-v2";8 compatible = "operating-points-v2";
9 opp-shared;9 opp-shared;
10 10
arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts+1−1
@@ -343,7 +343,7 @@ · 342 unmodified lines
343&spi0 {343&spi0 {
344 status = "okay";344 status = "okay";
345 345
346 spi-flash@0 {346 flash@0 {
347 compatible = "mxicy,mx25l1606e", "jedec,spi-nor";347 compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
348 reg = <0>;348 reg = <0>;
349 spi-max-frequency = <80000000>;349 spi-max-frequency = <80000000>;
arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts+27−1
@@ -35,6 +35,17 @@ · 34 unmodified lines
35 stdout-path = "serial0:115200n8";35 stdout-path = "serial0:115200n8";
36 };36 };
37 37
38 hdmi-connector {
39 compatible = "hdmi-connector";
40 type = "c";
41
42 port {
43 hdmi_con_in: endpoint {
44 remote-endpoint = <&hdmi_out_con>;
45 };
46 };
47 };
48
38 i2c-csi {49 i2c-csi {
39 compatible = "i2c-gpio";50 compatible = "i2c-gpio";
40 sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */51 sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
@@ -77,7 +88,7 @@ · 36 unmodified lines
77 sound-name-prefix = "Speaker Amp";88 sound-name-prefix = "Speaker Amp";
78 };89 };
79 90
80 vdd_bl: regulator@0 {91 vdd_bl: regulator {
81 compatible = "regulator-fixed";92 compatible = "regulator-fixed";
82 regulator-name = "bl-3v3";93 regulator-name = "bl-3v3";
83 regulator-min-microvolt = <3300000>;94 regulator-min-microvolt = <3300000>;
@@ -410,6 +421,21 @@ · 326 unmodified lines
410 regulator-name = "vcc-rtc";421 regulator-name = "vcc-rtc";
411};422};
412 423
424&simplefb_hdmi {
425 vcc-hdmi-supply = <&reg_dldo1>;
426};
427
428&hdmi {
429 hvcc-supply = <&reg_dldo1>;
430 status = "okay";
431};
432
433&hdmi_out {
434 hdmi_out_con: endpoint {
435 remote-endpoint = <&hdmi_con_in>;
436 };
437};
438
413&sound {439&sound {
414 status = "okay";440 status = "okay";
415 simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;441 simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts+2−1
@@ -139,6 +139,8 @@ · 138 unmodified lines
139 #size-cells = <0>;139 #size-cells = <0>;
140 140
141 port@0 {141 port@0 {
142 reg = <0>;
143
142 anx6345_in: endpoint {144 anx6345_in: endpoint {
143 remote-endpoint = <&tcon0_out_anx6345>;145 remote-endpoint = <&tcon0_out_anx6345>;
144 };146 };
@@ -206,7 +208,6 @@ · 61 unmodified lines
206 reg = <0x3a3>;208 reg = <0x3a3>;
207 interrupt-parent = <&r_intc>;209 interrupt-parent = <&r_intc>;
208 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;210 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
209 wakeup-source;
210 };211 };
211};212};
212 213
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi+17−0
@@ -102,6 +102,22 @@ · 101 unmodified lines
102 status = "disabled";102 status = "disabled";
103 };103 };
104 104
105 gpu_opp_table: opp-table-gpu {
106 compatible = "operating-points-v2";
107
108 opp-120000000 {
109 opp-hz = /bits/ 64 <120000000>;
110 };
111
112 opp-312000000 {
113 opp-hz = /bits/ 64 <312000000>;
114 };
115
116 opp-432000000 {
117 opp-hz = /bits/ 64 <432000000>;
118 };
119 };
120
105 osc24M: osc24M_clk {121 osc24M: osc24M_clk {
106 #clock-cells = <0>;122 #clock-cells = <0>;
107 compatible = "fixed-clock";123 compatible = "fixed-clock";
@@ -1103,6 +1119,7 @@ · 995 unmodified lines
1103 clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;1119 clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
1104 clock-names = "bus", "core";1120 clock-names = "bus", "core";
1105 resets = <&ccu RST_BUS_GPU>;1121 resets = <&ccu RST_BUS_GPU>;
1122 operating-points-v2 = <&gpu_opp_table>;
1106 };1123 };
1107 1124
1108 gic: interrupt-controller@1c81000 {1125 gic: interrupt-controller@1c81000 {
arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi+1−1
@@ -2,7 +2,7 @@ · 1 unmodified line
2// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>2// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
3 3
4/ {4/ {
5 cpu_opp_table: cpu-opp-table {5 cpu_opp_table: opp-table-cpu {
6 compatible = "operating-points-v2";6 compatible = "operating-points-v2";
7 opp-shared;7 opp-shared;
8 8
arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts+8−1
@@ -142,9 +142,16 @@ · 141 unmodified lines
142 status = "okay";142 status = "okay";
143 143
144 eeprom@51 {144 eeprom@51 {
145 compatible = "microchip,24c02";145 compatible = "microchip,24c02", "atmel,24c02";
146 reg = <0x51>;146 reg = <0x51>;
147 pagesize = <16>;147 pagesize = <16>;
148 read-only;
149 #address-cells = <1>;
150 #size-cells = <1>;
151
152 eth_mac1: mac-address@fa {
153 reg = <0xfa 0x06>;
154 };
148 };155 };
149};156};
150 157
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi+1−1
@@ -217,7 +217,7 @@ · 216 unmodified lines
217 };217 };
218 };218 };
219 219
220 gpu_thermal {220 gpu-thermal {
221 polling-delay-passive = <0>;221 polling-delay-passive = <0>;
222 polling-delay = <0>;222 polling-delay = <0>;
223 thermal-sensors = <&ths 1>;223 thermal-sensors = <&ths 1>;
arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi+1−1
@@ -3,7 +3,7 @@ · 2 unmodified lines
3// Copyright (C) 2020 Clément Péron <peron.clem@gmail.com>3// Copyright (C) 2020 Clément Péron <peron.clem@gmail.com>
4 4
5/ {5/ {
6 cpu_opp_table: cpu-opp-table {6 cpu_opp_table: opp-table-cpu {
7 compatible = "allwinner,sun50i-h6-operating-points";7 compatible = "allwinner,sun50i-h6-operating-points";
8 nvmem-cells = <&cpu_speed_grade>;8 nvmem-cells = <&cpu_speed_grade>;
9 opp-shared;9 opp-shared;
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi+4−4
@@ -119,10 +119,10 @@ · 118 unmodified lines
119 display_clocks: clock@0 {119 display_clocks: clock@0 {
120 compatible = "allwinner,sun50i-h6-de3-clk";120 compatible = "allwinner,sun50i-h6-de3-clk";
121 reg = <0x0 0x10000>;121 reg = <0x0 0x10000>;
122 clocks = <&ccu CLK_DE>,122 clocks = <&ccu CLK_BUS_DE>,
123 <&ccu CLK_BUS_DE>;123 <&ccu CLK_DE>;
124 clock-names = "mod",124 clock-names = "bus",
125 "bus";125 "mod";
126 resets = <&ccu RST_BUS_DE>;126 resets = <&ccu RST_BUS_DE>;
127 #clock-cells = <1>;127 #clock-cells = <1>;
128 #reset-cells = <1>;128 #reset-cells = <1>;
arch/arm64/boot/dts/amlogic/Makefile+3−0
@@ -1,5 +1,7 @@
1# SPDX-License-Identifier: GPL-2.01# SPDX-License-Identifier: GPL-2.0
2dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb2dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
3dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
4dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
3dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb5dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
4dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb6dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
5dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb7dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
@@ -38,6 +40,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb · 32 unmodified lines
38dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb40dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
39dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb41dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
40dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb42dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
43dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb
41dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb44dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
42dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb45dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
43dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb46dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts+362−0
@@ -0,0 +1,362 @@
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in>
4 * Copyright (c) 2020 JetHome
5 * Author: Aleksandr Kazantsev <ak@tvip.ru>
6 * Author: Alexey Shevelkin <ash@tvip.ru>
7 * Author: Vyacheslav Bocharov <adeep@lexina.in>
8 */
9
10/dts-v1/;
11
12#include "meson-axg.dtsi"
13#include <dt-bindings/input/input.h>
14#include <dt-bindings/thermal/thermal.h>
15
16/ {
17 compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg";
18 model = "JetHome JetHub J100";
19 aliases {
20 serial0 = &uart_AO; /* Console */
21 serial1 = &uart_AO_B; /* External UART (Wireless Module) */
22 ethernet0 = &ethmac;
23 };
24
25 chosen {
26 stdout-path = "serial0:115200n8";
27 };
28
29 /* 1024MB RAM */
30 memory@0 {
31 device_type = "memory";
32 reg = <0x0 0x0 0x0 0x40000000>;
33 };
34
35 reserved-memory {
36 linux,cma {
37 size = <0x0 0x400000>;
38 };
39 };
40
41 emmc_pwrseq: emmc-pwrseq {
42 compatible = "mmc-pwrseq-emmc";
43 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
44 };
45
46 vcc_3v3: regulator-vcc_3v3 {
47 compatible = "regulator-fixed";
48 regulator-name = "VCC_3V3";
49 regulator-min-microvolt = <3300000>;
50 regulator-max-microvolt = <3300000>;
51 vin-supply = <&vddao_3v3>;
52 regulator-always-on;
53 };
54
55 vcc_5v: regulator-vcc_5v {
56 compatible = "regulator-fixed";
57 regulator-name = "VCC5V";
58 regulator-min-microvolt = <5000000>;
59 regulator-max-microvolt = <5000000>;
60 regulator-always-on;
61 };
62
63 vddao_3v3: regulator-vddao_3v3 {
64 compatible = "regulator-fixed";
65 regulator-name = "VDDAO_3V3";
66 regulator-min-microvolt = <3300000>;
67 regulator-max-microvolt = <3300000>;
68 vin-supply = <&vcc_5v>;
69 regulator-always-on;
70 };
71
72 vddio_ao18: regulator-vddio_ao18 {
73 compatible = "regulator-fixed";
74 regulator-name = "VDDIO_AO18";
75 regulator-min-microvolt = <1800000>;
76 regulator-max-microvolt = <1800000>;
77 vin-supply = <&vddao_3v3>;
78 regulator-always-on;
79 };
80
81 vddio_boot: regulator-vddio_boot {
82 compatible = "regulator-fixed";
83 regulator-name = "VDDIO_BOOT";
84 regulator-min-microvolt = <1800000>;
85 regulator-max-microvolt = <1800000>;
86 vin-supply = <&vddao_3v3>;
87 regulator-always-on;
88 };
89
90 usb_pwr: regulator-usb_pwr {
91 compatible = "regulator-fixed";
92 regulator-name = "USB_PWR";
93 regulator-min-microvolt = <5000000>;
94 regulator-max-microvolt = <5000000>;
95 vin-supply = <&vcc_5v>;
96 regulator-always-on;
97 };
98
99 sdio_pwrseq: sdio-pwrseq {
100 compatible = "mmc-pwrseq-simple";
101 reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
102 clocks = <&wifi32k>;
103 clock-names = "ext_clock";
104 };
105
106 wifi32k: wifi32k {
107 compatible = "pwm-clock";
108 #clock-cells = <0>;
109 clock-frequency = <32768>;
110 pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
111 };
112
113 thermal-zones {
114 cpu_thermal: cpu-thermal {
115 polling-delay-passive = <250>;
116 polling-delay = <1000>;
117 thermal-sensors = <&scpi_sensors 0>;
118 trips {
119 cpu_passive: cpu-passive {
120 temperature = <70000>; /* millicelsius */
121 hysteresis = <2000>; /* millicelsius */
122 type = "passive";
123 };
124
125 cpu_hot: cpu-hot {
126 temperature = <80000>; /* millicelsius */
127 hysteresis = <2000>; /* millicelsius */
128 type = "hot";
129 };
130
131 cpu_critical: cpu-critical {
132 temperature = <100000>; /* millicelsius */
133 hysteresis = <2000>; /* millicelsius */
134 type = "critical";
135 };
136 };
137 };
138
139 cpu_cooling_maps: cooling-maps {
140 map0 {
141 trip = <&cpu_passive>;
142 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
143 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
144 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
145 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
146 };
147
148 map1 {
149 trip = <&cpu_hot>;
150 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
151 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
152 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
153 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
154 };
155 };
156 };
157
158 onewire {
159 compatible = "w1-gpio";
160 gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>;
161 #gpio-cells = <1>;
162 };
163};
164
165&efuse {
166 sn: sn@32 {
167 reg = <0x32 0x20>;
168 };
169
170 eth_mac: eth_mac@0 {
171 reg = <0x0 0x6>;
172 };
173
174 bt_mac: bt_mac@6 {
175 reg = <0x6 0x6>;
176 };
177
178 wifi_mac: wifi_mac@c {
179 reg = <0xc 0x6>;
180 };
181
182 bid: bid@12 {
183 reg = <0x12 0x20>;
184 };
185};
186
187&ethmac {
188 status = "okay";
189 pinctrl-0 = <&eth_rmii_x_pins>;
190 pinctrl-names = "default";
191 phy-handle = <&eth_phy0>;
192 phy-mode = "rmii";
193
194 mdio {
195 compatible = "snps,dwmac-mdio";
196 #address-cells = <1>;
197 #size-cells = <0>;
198
199 /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */
200 eth_phy0: ethernet-phy@0 {
201 /* compatible = "ethernet-phy-id0243.0c54";*/
202 max-speed = <100>;
203 reg = <0>;
204
205 reset-assert-us = <10000>;
206 reset-deassert-us = <10000>;
207 reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>;
208 };
209 };
210};
211
212/* Internal I2C bus (on CPU module) */
213&i2c1 {
214 status = "okay";
215 pinctrl-0 = <&i2c1_z_pins>;
216 pinctrl-names = "default";
217
218 /* RTC */
219 pcf8563: pcf8563@51 {
220 compatible = "nxp,pcf8563";
221 reg = <0x51>;
222 status = "okay";
223 };
224};
225
226/* Peripheral I2C bus (on motherboard) */
227&i2c_AO {
228 status = "okay";
229 pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
230 pinctrl-names = "default";
231};
232
233&pwm_ab {
234 status = "okay";
235 pinctrl-0 = <&pwm_a_x20_pins>;
236 pinctrl-names = "default";
237};
238
239/* wifi module */
240&sd_emmc_b {
241 status = "okay";
242 #address-cells = <1>;
243 #size-cells = <0>;
244
245 pinctrl-0 = <&sdio_pins>;
246 pinctrl-1 = <&sdio_clk_gate_pins>;
247 pinctrl-names = "default", "clk-gate";
248
249 bus-width = <4>;
250 cap-sd-highspeed;
251 sd-uhs-sdr104;
252 max-frequency = <200000000>;
253 non-removable;
254 disable-wp;
255
256 mmc-pwrseq = <&sdio_pwrseq>;
257
258 vmmc-supply = <&vddao_3v3>;
259 vqmmc-supply = <&vddio_boot>;
260
261 brcmf: wifi@1 {
262 reg = <1>;
263 compatible = "brcm,bcm4329-fmac";
264 };
265};
266
267/* emmc storage */
268&sd_emmc_c {
269 status = "okay";
270 pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
271 pinctrl-1 = <&emmc_clk_gate_pins>;
272 pinctrl-names = "default", "clk-gate";
273
274 bus-width = <8>;
275 cap-mmc-highspeed;
276 max-frequency = <200000000>;
277 non-removable;
278 disable-wp;
279 mmc-ddr-1_8v;
280 mmc-hs200-1_8v;
281
282 mmc-pwrseq = <&emmc_pwrseq>;
283
284 vmmc-supply = <&vcc_3v3>;
285 vqmmc-supply = <&vddio_boot>;
286};
287
288/* UART Bluetooth */
289&uart_B {
290 status = "okay";
291 pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>;
292 pinctrl-names = "default";
293 uart-has-rtscts;
294
295 bluetooth {
296 compatible = "brcm,bcm43438-bt";
297 shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
298 };
299};
300
301/* UART Console */
302&uart_AO {
303 status = "okay";
304 pinctrl-0 = <&uart_ao_a_pins>;
305 pinctrl-names = "default";
306};
307
308/* UART Wireless module */
309&uart_AO_B {
310 status = "okay";
311 pinctrl-0 = <&uart_ao_b_pins>;
312 pinctrl-names = "default";
313};
314
315&usb {
316 status = "okay";
317 phy-supply = <&usb_pwr>;
318};
319
320&spicc1 {
321 status = "okay";
322 pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>;
323 pinctrl-names = "default";
324};
325
326&gpio {
327 gpio-line-names =
328 "", "", "", "", "", // 0 - 4
329 "", "", "", "", "", // 5 - 9
330 "UserButton", "", "", "", "", // 10 - 14
331 "", "", "", "", "", // 15 - 19
332 "", "", "", "", "", // 20 - 24
333 "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29
334 "Output1", "", "", "", "", // 30 - 34
335 "", "ZigBeeBOOT", "", "", "", // 35 - 39
336 "1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44
337 "Input2", "Input1", "", "", "", // 45 - 49
338 "", "", "", "", "", // 50 - 54
339 "", "", "", "", "", // 55 - 59
340 "", "", "", "", "", // 60 - 64
341 "", "", "", "", "", // 65 - 69
342 "", "", "", "", "", // 70 - 74
343 "", "", "", "", "", // 75 - 79
344 "", "", "", "", "", // 80 - 84
345 "", ""; // 85-86
346};
347
348&cpu0 {
349 #cooling-cells = <2>;
350};
351
352&cpu1 {
353 #cooling-cells = <2>;
354};
355
356&cpu2 {
357 #cooling-cells = <2>;
358};
359
360&cpu3 {
361 #cooling-cells = <2>;
362};
arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts+405−0
@@ -0,0 +1,405 @@
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2018 BayLibre SAS. All rights reserved.
4 */
5
6/dts-v1/;
7
8#include "meson-g12a.dtsi"
9#include <dt-bindings/gpio/meson-g12a-gpio.h>
10#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
11
12/ {
13 compatible = "radxa,zero", "amlogic,g12a";
14 model = "Radxa Zero";
15
16 aliases {
17 serial0 = &uart_AO;
18 };
19
20 chosen {
21 stdout-path = "serial0:115200n8";
22 };
23
24 memory@0 {
25 device_type = "memory";
26 reg = <0x0 0x0 0x0 0x40000000>;
27 };
28
29 cvbs-connector {
30 status = "disabled";
31 compatible = "composite-video-connector";
32
33 port {
34 cvbs_connector_in: endpoint {
35 remote-endpoint = <&cvbs_vdac_out>;
36 };
37 };
38 };
39
40 hdmi-connector {
41 compatible = "hdmi-connector";
42 type = "a";
43
44 port {
45 hdmi_connector_in: endpoint {
46 remote-endpoint = <&hdmi_tx_tmds_out>;
47 };
48 };
49 };
50
51 emmc_pwrseq: emmc-pwrseq {
52 compatible = "mmc-pwrseq-emmc";
53 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
54 };
55
56 sdio_pwrseq: sdio-pwrseq {
57 compatible = "mmc-pwrseq-simple";
58 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
59 clocks = <&wifi32k>;
60 clock-names = "ext_clock";
61 };
62
63 ao_5v: regulator-ao_5v {
64 compatible = "regulator-fixed";
65 regulator-name = "AO_5V";
66 regulator-min-microvolt = <5000000>;
67 regulator-max-microvolt = <5000000>;
68 regulator-always-on;
69 };
70
71 vcc_1v8: regulator-vcc_1v8 {
72 compatible = "regulator-fixed";
73 regulator-name = "VCC_1V8";
74 regulator-min-microvolt = <1800000>;
75 regulator-max-microvolt = <1800000>;
76 vin-supply = <&vcc_3v3>;
77 regulator-always-on;
78 };
79
80 vcc_3v3: regulator-vcc_3v3 {
81 compatible = "regulator-fixed";
82 regulator-name = "VCC_3V3";
83 regulator-min-microvolt = <3300000>;
84 regulator-max-microvolt = <3300000>;
85 vin-supply = <&vddao_3v3>;
86 regulator-always-on;
87 };
88
89 hdmi_pw: regulator-hdmi_pw {
90 compatible = "regulator-fixed";
91 regulator-name = "HDMI_PW";
92 regulator-min-microvolt = <5000000>;
93 regulator-max-microvolt = <5000000>;
94 vin-supply = <&ao_5v>;
95 regulator-always-on;
96 };
97
98 vddao_1v8: regulator-vddao_1v8 {
99 compatible = "regulator-fixed";
100 regulator-name = "VDDAO_1V8";
101 regulator-min-microvolt = <1800000>;
102 regulator-max-microvolt = <1800000>;
103 vin-supply = <&vddao_3v3>;
104 regulator-always-on;
105 };
106
107 vddao_3v3: regulator-vddao_3v3 {
108 compatible = "regulator-fixed";
109 regulator-name = "VDDAO_3V3";
110 regulator-min-microvolt = <3300000>;
111 regulator-max-microvolt = <3300000>;
112 vin-supply = <&ao_5v>;
113 regulator-always-on;
114 };
115
116 vddcpu: regulator-vddcpu {
117 compatible = "pwm-regulator";
118
119 regulator-name = "VDDCPU";
120 regulator-min-microvolt = <721000>;
121 regulator-max-microvolt = <1022000>;
122
123 vin-supply = <&ao_5v>;
124
125 pwms = <&pwm_AO_cd 1 1250 0>;
126 pwm-dutycycle-range = <100 0>;
127
128 regulator-boot-on;
129 regulator-always-on;
130 };
131
132 sound {
133 compatible = "amlogic,axg-sound-card";
134 model = "RADXA-ZERO";
135 audio-aux-devs = <&tdmout_b>;
136 audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
137 "TDMOUT_B IN 1", "FRDDR_B OUT 1",
138 "TDMOUT_B IN 2", "FRDDR_C OUT 1",
139 "TDM_B Playback", "TDMOUT_B OUT";
140
141 assigned-clocks = <&clkc CLKID_MPLL2>,
142 <&clkc CLKID_MPLL0>,
143 <&clkc CLKID_MPLL1>;
144 assigned-clock-parents = <0>, <0>, <0>;
145 assigned-clock-rates = <294912000>,
146 <270950400>,
147 <393216000>;
148 status = "okay";
149
150 dai-link-0 {
151 sound-dai = <&frddr_a>;
152 };
153
154 dai-link-1 {
155 sound-dai = <&frddr_b>;
156 };
157
158 dai-link-2 {
159 sound-dai = <&frddr_c>;
160 };
161
162 /* 8ch hdmi interface */
163 dai-link-3 {
164 sound-dai = <&tdmif_b>;
165 dai-format = "i2s";
166 dai-tdm-slot-tx-mask-0 = <1 1>;
167 dai-tdm-slot-tx-mask-1 = <1 1>;
168 dai-tdm-slot-tx-mask-2 = <1 1>;
169 dai-tdm-slot-tx-mask-3 = <1 1>;
170 mclk-fs = <256>;
171
172 codec {
173 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
174 };
175 };
176
177 dai-link-4 {
178 sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
179
180 codec {
181 sound-dai = <&hdmi_tx>;
182 };
183 };
184 };
185
186 wifi32k: wifi32k {
187 compatible = "pwm-clock";
188 #clock-cells = <0>;
189 clock-frequency = <32768>;
190 pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
191 };
192};
193
194&arb {
195 status = "okay";
196};
197
198&cec_AO {
199 pinctrl-0 = <&cec_ao_a_h_pins>;
200 pinctrl-names = "default";
201 status = "disabled";
202 hdmi-phandle = <&hdmi_tx>;
203};
204
205&cecb_AO {
206 pinctrl-0 = <&cec_ao_b_h_pins>;
207 pinctrl-names = "default";
208 status = "okay";
209 hdmi-phandle = <&hdmi_tx>;
210};
211
212&clkc_audio {
213 status = "okay";
214};
215
216&cpu0 {
217 cpu-supply = <&vddcpu>;
218 operating-points-v2 = <&cpu_opp_table>;
219 clocks = <&clkc CLKID_CPU_CLK>;
220 clock-latency = <50000>;
221};
222
223&cpu1 {
224 cpu-supply = <&vddcpu>;
225 operating-points-v2 = <&cpu_opp_table>;
226 clocks = <&clkc CLKID_CPU_CLK>;
227 clock-latency = <50000>;
228};
229
230&cpu2 {
231 cpu-supply = <&vddcpu>;
232 operating-points-v2 = <&cpu_opp_table>;
233 clocks = <&clkc CLKID_CPU_CLK>;
234 clock-latency = <50000>;
235};
236
237&cpu3 {
238 cpu-supply = <&vddcpu>;
239 operating-points-v2 = <&cpu_opp_table>;
240 clocks = <&clkc CLKID_CPU_CLK>;
241 clock-latency = <50000>;
242};
243
244&cvbs_vdac_port {
245 cvbs_vdac_out: endpoint {
246 remote-endpoint = <&cvbs_connector_in>;
247 };
248};
249
250&frddr_a {
251 status = "okay";
252};
253
254&frddr_b {
255 status = "okay";
256};
257
258&frddr_c {
259 status = "okay";
260};
261
262&hdmi_tx {
263 status = "okay";
264 pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
265 pinctrl-names = "default";
266 hdmi-supply = <&hdmi_pw>;
267};
268
269&hdmi_tx_tmds_port {
270 hdmi_tx_tmds_out: endpoint {
271 remote-endpoint = <&hdmi_connector_in>;
272 };
273};
274
275&ir {
276 status = "disabled";
277 pinctrl-0 = <&remote_input_ao_pins>;
278 pinctrl-names = "default";
279};
280
281&pwm_AO_cd {
282 pinctrl-0 = <&pwm_ao_d_e_pins>;
283 pinctrl-names = "default";
284 clocks = <&xtal>;
285 clock-names = "clkin1";
286 status = "okay";
287};
288
289&pwm_ef {
290 status = "okay";
291 pinctrl-0 = <&pwm_e_pins>;
292 pinctrl-names = "default";
293 clocks = <&xtal>;
294 clock-names = "clkin0";
295};
296
297&saradc {
298 status = "okay";
299 vref-supply = <&vddao_1v8>;
300};
301
302/* SDIO */
303&sd_emmc_a {
304 status = "okay";
305 pinctrl-0 = <&sdio_pins>;
306 pinctrl-1 = <&sdio_clk_gate_pins>;
307 pinctrl-names = "default", "clk-gate";
308 #address-cells = <1>;
309 #size-cells = <0>;
310
311 bus-width = <4>;
312 cap-sd-highspeed;
313 sd-uhs-sdr50;
314 max-frequency = <100000000>;
315
316 non-removable;
317 disable-wp;
318
319 /* WiFi firmware requires power to be kept while in suspend */
320 keep-power-in-suspend;
321
322 mmc-pwrseq = <&sdio_pwrseq>;
323
324 vmmc-supply = <&vddao_3v3>;
325 vqmmc-supply = <&vddao_1v8>;
326
327 brcmf: wifi@1 {
328 reg = <1>;
329 compatible = "brcm,bcm4329-fmac";
330 };
331};
332
333/* SD card */
334&sd_emmc_b {
335 status = "okay";
336 pinctrl-0 = <&sdcard_c_pins>;
337 pinctrl-1 = <&sdcard_clk_gate_c_pins>;
338 pinctrl-names = "default", "clk-gate";
339
340 bus-width = <4>;
341 cap-sd-highspeed;
342 max-frequency = <100000000>;
343 disable-wp;
344
345 cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
346 vmmc-supply = <&vddao_3v3>;
347 vqmmc-supply = <&vddao_3v3>;
348};
349
350/* eMMC */
351&sd_emmc_c {
352 status = "okay";
353 pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
354 pinctrl-1 = <&emmc_clk_gate_pins>;
355 pinctrl-names = "default", "clk-gate";
356
357 bus-width = <8>;
358 cap-mmc-highspeed;
359 mmc-ddr-1_8v;
360 mmc-hs200-1_8v;
361 max-frequency = <200000000>;
362 disable-wp;
363
364 mmc-pwrseq = <&emmc_pwrseq>;
365 vmmc-supply = <&vcc_3v3>;
366 vqmmc-supply = <&vcc_1v8>;
367};
368
369&tdmif_b {
370 status = "okay";
371};
372
373&tdmout_b {
374 status = "okay";
375};
376
377&tohdmitx {
378 status = "okay";
379};
380
381&uart_A {
382 status = "okay";
383 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
384 pinctrl-names = "default";
385 uart-has-rtscts;
386
387 bluetooth {
388 compatible = "brcm,bcm43438-bt";
389 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
390 max-speed = <2000000>;
391 clocks = <&wifi32k>;
392 clock-names = "lpo";
393 };
394};
395
396&uart_AO {
397 status = "okay";
398 pinctrl-0 = <&uart_ao_a_pins>;
399 pinctrl-names = "default";
400};
401
402&usb {
403 status = "okay";
404 dr_mode = "host";
405};
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts+1−1
@@ -139,7 +139,7 @@ · 138 unmodified lines
139 regulator-min-microvolt = <721000>;139 regulator-min-microvolt = <721000>;
140 regulator-max-microvolt = <1022000>;140 regulator-max-microvolt = <1022000>;
141 141
142 vin-supply = <&dc_in>;142 pwm-supply = <&dc_in>;
143 143
144 pwms = <&pwm_AO_cd 1 1250 0>;144 pwms = <&pwm_AO_cd 1 1250 0>;
145 pwm-dutycycle-range = <100 0>;145 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts+1−1
@@ -139,7 +139,7 @@ · 138 unmodified lines
139 regulator-min-microvolt = <721000>;139 regulator-min-microvolt = <721000>;
140 regulator-max-microvolt = <1022000>;140 regulator-max-microvolt = <1022000>;
141 141
142 vin-supply = <&main_12v>;142 pwm-supply = <&main_12v>;
143 143
144 pwms = <&pwm_AO_cd 1 1250 0>;144 pwms = <&pwm_AO_cd 1 1250 0>;
145 pwm-dutycycle-range = <100 0>;145 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts+1−1
@@ -139,7 +139,7 @@ · 138 unmodified lines
139 regulator-min-microvolt = <721000>;139 regulator-min-microvolt = <721000>;
140 regulator-max-microvolt = <1022000>;140 regulator-max-microvolt = <1022000>;
141 141
142 vin-supply = <&dc_in>;142 pwm-supply = <&dc_in>;
143 143
144 pwms = <&pwm_AO_cd 1 1250 0>;144 pwms = <&pwm_AO_cd 1 1250 0>;
145 pwm-dutycycle-range = <100 0>;145 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi+2−2
@@ -18,7 +18,7 @@ · 17 unmodified lines
18 regulator-min-microvolt = <690000>;18 regulator-min-microvolt = <690000>;
19 regulator-max-microvolt = <1050000>;19 regulator-max-microvolt = <1050000>;
20 20
21 vin-supply = <&dc_in>;21 pwm-supply = <&dc_in>;
22 22
23 pwms = <&pwm_ab 0 1250 0>;23 pwms = <&pwm_ab 0 1250 0>;
24 pwm-dutycycle-range = <100 0>;24 pwm-dutycycle-range = <100 0>;
@@ -37,7 +37,7 @@ · 12 unmodified lines
37 regulator-min-microvolt = <690000>;37 regulator-min-microvolt = <690000>;
38 regulator-max-microvolt = <1050000>;38 regulator-max-microvolt = <1050000>;
39 39
40 vin-supply = <&vsys_3v3>;40 pwm-supply = <&vsys_3v3>;
41 41
42 pwms = <&pwm_AO_cd 1 1250 0>;42 pwms = <&pwm_AO_cd 1 1250 0>;
43 pwm-dutycycle-range = <100 0>;43 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi+4−2
@@ -99,6 +99,8 @@ · 98 unmodified lines
99 regulator-max-microvolt = <5000000>;99 regulator-max-microvolt = <5000000>;
100 regulator-always-on;100 regulator-always-on;
101 vin-supply = <&main_12v>;101 vin-supply = <&main_12v>;
102 gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
103 enable-active-high;
102 };104 };
103 105
104 vcc_1v8: regulator-vcc_1v8 {106 vcc_1v8: regulator-vcc_1v8 {
@@ -130,7 +132,7 @@ · 25 unmodified lines
130 regulator-min-microvolt = <721000>;132 regulator-min-microvolt = <721000>;
131 regulator-max-microvolt = <1022000>;133 regulator-max-microvolt = <1022000>;
132 134
133 vin-supply = <&main_12v>;135 pwm-supply = <&main_12v>;
134 136
135 pwms = <&pwm_ab 0 1250 0>;137 pwms = <&pwm_ab 0 1250 0>;
136 pwm-dutycycle-range = <100 0>;138 pwm-dutycycle-range = <100 0>;
@@ -149,7 +151,7 @@ · 12 unmodified lines
149 regulator-min-microvolt = <721000>;151 regulator-min-microvolt = <721000>;
150 regulator-max-microvolt = <1022000>;152 regulator-max-microvolt = <1022000>;
151 153
152 vin-supply = <&main_12v>;154 pwm-supply = <&main_12v>;
153 155
154 pwms = <&pwm_AO_cd 1 1250 0>;156 pwms = <&pwm_AO_cd 1 1250 0>;
155 pwm-dutycycle-range = <100 0>;157 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi+2−2
@@ -96,7 +96,7 @@ · 95 unmodified lines
96 regulator-min-microvolt = <721000>;96 regulator-min-microvolt = <721000>;
97 regulator-max-microvolt = <1022000>;97 regulator-max-microvolt = <1022000>;
98 98
99 vin-supply = <&main_12v>;99 pwm-supply = <&main_12v>;
100 100
101 pwms = <&pwm_ab 0 1250 0>;101 pwms = <&pwm_ab 0 1250 0>;
102 pwm-dutycycle-range = <100 0>;102 pwm-dutycycle-range = <100 0>;
@@ -115,7 +115,7 @@ · 12 unmodified lines
115 regulator-min-microvolt = <721000>;115 regulator-min-microvolt = <721000>;
116 regulator-max-microvolt = <1022000>;116 regulator-max-microvolt = <1022000>;
117 117
118 vin-supply = <&main_12v>;118 pwm-supply = <&main_12v>;
119 119
120 pwms = <&pwm_AO_cd 1 1250 0>;120 pwms = <&pwm_AO_cd 1 1250 0>;
121 pwm-dutycycle-range = <100 0>;121 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts+241−0
@@ -0,0 +1,241 @@
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in>
4 * Copyright (c) 2020 JetHome
5 * Author: Aleksandr Kazantsev <ak@tvip.ru>
6 * Author: Alexey Shevelkin <ash@tvip.ru>
7 * Author: Vyacheslav Bocharov <adeep@lexina.in>
8 */
9
10/dts-v1/;
11
12#include "meson-gxl.dtsi"
13
14/ {
15 compatible = "jethome,jethub-j80", "amlogic,s905w", "amlogic,meson-gxl";
16 model = "JetHome JetHub J80";
17 memory@0 {
18 device_type = "memory";
19 reg = <0x0 0x0 0x0 0x40000000>;
20 };
21
22 reserved-memory {
23 linux,cma {
24 size = <0x0 0x1000000>;
25 };
26 };
27
28 aliases {
29 serial0 = &uart_AO; /* Console */
30 serial1 = &uart_A; /* Bluetooth */
31 serial2 = &uart_AO_B; /* Wireless module 1 */
32 serial3 = &uart_C; /* Wireless module 2 */
33 ethernet0 = &ethmac;
34 };
35
36 chosen {
37 stdout-path = "serial0:115200n8";
38 };
39
40 vddio_ao18: regulator-vddio_ao18 {
41 compatible = "regulator-fixed";
42 regulator-name = "VDDIO_AO18";
43 regulator-min-microvolt = <1800000>;
44 regulator-max-microvolt = <1800000>;
45 };
46
47 vddio_boot: regulator-vddio_boot {
48 compatible = "regulator-fixed";
49 regulator-name = "VDDIO_BOOT";
50 regulator-min-microvolt = <1800000>;
51 regulator-max-microvolt = <1800000>;
52 };
53
54 vddao_3v3: regulator-vddao_3v3 {
55 compatible = "regulator-fixed";
56 regulator-name = "VDDAO_3V3";
57 regulator-min-microvolt = <3300000>;
58 regulator-max-microvolt = <3300000>;
59 };
60
61 vcc_3v3: regulator-vcc_3v3 {
62 compatible = "regulator-fixed";
63 regulator-name = "VCC_3V3";
64 regulator-min-microvolt = <3300000>;
65 regulator-max-microvolt = <3300000>;
66 };
67
68 emmc_pwrseq: emmc-pwrseq {
69 compatible = "mmc-pwrseq-emmc";
70 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
71 };
72
73 wifi32k: wifi32k {
74 compatible = "pwm-clock";
75 #clock-cells = <0>;
76 clock-frequency = <32768>;
77 pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
78 };
79
80 sdio_pwrseq: sdio-pwrseq {
81 compatible = "mmc-pwrseq-simple";
82 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
83 clocks = <&wifi32k>;
84 clock-names = "ext_clock";
85 };
86};
87
88&efuse {
89 bt_mac: bt_mac@6 {
90 reg = <0x6 0x6>;
91 };
92
93 wifi_mac: wifi_mac@C {
94 reg = <0xc 0x6>;
95 };
96};
97
98&sn {
99 reg = <0x32 0x20>;
100};
101
102&eth_mac {
103 reg = <0x0 0x6>;
104};
105
106&bid {
107 reg = <0x12 0x20>;
108};
109
110&usb {
111 status = "okay";
112 dr_mode = "host";
113};
114
115&pwm_ef {
116 status = "okay";
117 pinctrl-0 = <&pwm_e_pins>;
118 pinctrl-names = "default";
119 clocks = <&clkc CLKID_FCLK_DIV4>;
120 clock-names = "clkin0";
121};
122
123&saradc {
124 status = "okay";
125 vref-supply = <&vddio_ao18>;
126};
127
128/* Wireless SDIO Module */
129&sd_emmc_a {
130 status = "okay";
131 pinctrl-0 = <&sdio_pins>;
132 pinctrl-1 = <&sdio_clk_gate_pins>;
133 pinctrl-names = "default", "clk-gate";
134 #address-cells = <1>;
135 #size-cells = <0>;
136
137 bus-width = <4>;
138 cap-sd-highspeed;
139 max-frequency = <50000000>;
140
141 non-removable;
142 disable-wp;
143
144 /* WiFi firmware requires power to be kept while in suspend */
145 keep-power-in-suspend;
146
147 mmc-pwrseq = <&sdio_pwrseq>;
148
149 vmmc-supply = <&vddao_3v3>;
150 vqmmc-supply = <&vddio_boot>;
151};
152
153/* SD card */
154&sd_emmc_b {
155 status = "okay";
156 pinctrl-0 = <&sdcard_pins>;
157 pinctrl-1 = <&sdcard_clk_gate_pins>;
158 pinctrl-names = "default", "clk-gate";
159
160 bus-width = <4>;
161 cap-sd-highspeed;
162 max-frequency = <50000000>;
163 disable-wp;
164
165 cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
166
167 vmmc-supply = <&vddao_3v3>;
168 vqmmc-supply = <&vddio_boot>;
169};
170
171/* eMMC */
172&sd_emmc_c {
173 status = "okay";
174 pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
175 pinctrl-1 = <&emmc_clk_gate_pins>;
176 pinctrl-names = "default", "clk-gate";
177
178 bus-width = <8>;
179 cap-mmc-highspeed;
180 max-frequency = <200000000>;
181 non-removable;
182 disable-wp;
183 mmc-ddr-1_8v;
184 mmc-hs200-1_8v;
185
186 mmc-pwrseq = <&emmc_pwrseq>;
187 vmmc-supply = <&vcc_3v3>;
188 vqmmc-supply = <&vddio_boot>;
189};
190
191/* Console UART */
192&uart_AO {
193 status = "okay";
194 pinctrl-0 = <&uart_ao_a_pins>;
195 pinctrl-names = "default";
196};
197
198/* S905W only has access to its internal PHY */
199&ethmac {
200 status = "okay";
201 phy-mode = "rmii";
202 phy-handle = <&internal_phy>;
203};
204
205&internal_phy {
206 status = "okay";
207 pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
208 pinctrl-names = "default";
209};
210
211&uart_A {
212 status = "okay";
213 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
214 pinctrl-names = "default";
215 uart-has-rtscts;
216};
217
218&uart_C {
219 status = "okay";
220 pinctrl-0 = <&uart_c_pins>;
221 pinctrl-names = "default";
222};
223
224&uart_AO_B {
225 status = "okay";
226 pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>;
227 pinctrl-names = "default";
228 uart-has-rtscts;
229};
230
231&i2c_B {
232 status = "okay";
233 pinctrl-names = "default";
234 pinctrl-0 = <&i2c_b_pins>;
235
236 pcf8563: pcf8563@51 {
237 compatible = "nxp,pcf8563";
238 reg = <0x51>;
239 status = "okay";
240 };
241};
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts+61−0
@@ -14,6 +14,7 @@ · 13 unmodified lines
14/dts-v1/;14/dts-v1/;
15 15
16#include "meson-gxm.dtsi"16#include "meson-gxm.dtsi"
17#include <dt-bindings/sound/meson-aiu.h>
17 18
18/ {19/ {
19 compatible = "kingnovel,r-box-pro", "amlogic,s912", "amlogic,meson-gxm";20 compatible = "kingnovel,r-box-pro", "amlogic,s912", "amlogic,meson-gxm";
@@ -33,6 +34,13 @@ · 13 unmodified lines
33 reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */34 reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
34 };35 };
35 36
37 spdif_dit: audio-codec-0 {
38 #sound-dai-cells = <0>;
39 compatible = "linux,spdif-dit";
40 status = "okay";
41 sound-name-prefix = "DIT";
42 };
43
36 leds {44 leds {
37 compatible = "gpio-leds";45 compatible = "gpio-leds";
38 46
@@ -90,6 +98,59 @@ · 51 unmodified lines
90 clocks = <&wifi32k>;98 clocks = <&wifi32k>;
91 clock-names = "ext_clock";99 clock-names = "ext_clock";
92 };100 };
101
102 sound {
103 compatible = "amlogic,gx-sound-card";
104 model = "RBOX-PRO";
105 assigned-clocks = <&clkc CLKID_MPLL0>,
106 <&clkc CLKID_MPLL1>,
107 <&clkc CLKID_MPLL2>;
108 assigned-clock-parents = <0>, <0>, <0>;
109 assigned-clock-rates = <294912000>,
110 <270950400>,
111 <393216000>;
112 status = "okay";
113
114 dai-link-0 {
115 sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
116 };
117
118 dai-link-1 {
119 sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
120 };
121
122 dai-link-2 {
123 sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
124 dai-format = "i2s";
125 mclk-fs = <256>;
126
127 codec-0 {
128 sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
129 };
130 };
131
132 dai-link-3 {
133 sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
134
135 codec-0 {
136 sound-dai = <&spdif_dit>;
137 };
138 };
139
140 dai-link-4 {
141 sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
142
143 codec-0 {
144 sound-dai = <&hdmi_tx>;
145 };
146 };
147 };
148};
149
150&aiu {
151 status = "okay";
152 pinctrl-0 = <&spdif_out_h_pins>;
153 pinctrl-names = "default";
93};154};
94 155
95&ethmac {156&ethmac {
arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts+1−1
@@ -173,7 +173,7 @@ · 172 unmodified lines
173 regulator-min-microvolt = <690000>;173 regulator-min-microvolt = <690000>;
174 regulator-max-microvolt = <1050000>;174 regulator-max-microvolt = <1050000>;
175 175
176 vin-supply = <&dc_in>;176 pwm-supply = <&dc_in>;
177 177
178 pwms = <&pwm_AO_cd 1 1250 0>;178 pwms = <&pwm_AO_cd 1 1250 0>;
179 pwm-dutycycle-range = <100 0>;179 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts+1−1
@@ -24,7 +24,7 @@ · 23 unmodified lines
24 regulator-min-microvolt = <690000>;24 regulator-min-microvolt = <690000>;
25 regulator-max-microvolt = <1050000>;25 regulator-max-microvolt = <1050000>;
26 26
27 vin-supply = <&vsys_3v3>;27 pwm-supply = <&vsys_3v3>;
28 28
29 pwms = <&pwm_AO_cd 1 1250 0>;29 pwms = <&pwm_AO_cd 1 1250 0>;
30 pwm-dutycycle-range = <100 0>;30 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi+5−1
@@ -116,7 +116,7 @@ · 115 unmodified lines
116 regulator-min-microvolt = <721000>;116 regulator-min-microvolt = <721000>;
117 regulator-max-microvolt = <1022000>;117 regulator-max-microvolt = <1022000>;
118 118
119 vin-supply = <&main_12v>;119 pwm-supply = <&main_12v>;
120 120
121 pwms = <&pwm_AO_cd 1 1250 0>;121 pwms = <&pwm_AO_cd 1 1250 0>;
122 pwm-dutycycle-range = <100 0>;122 pwm-dutycycle-range = <100 0>;
@@ -263,6 +263,10 @@ · 140 unmodified lines
263 reg = <0>;263 reg = <0>;
264 max-speed = <1000>;264 max-speed = <1000>;
265 265
266 reset-assert-us = <10000>;
267 reset-deassert-us = <80000>;
268 reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
269
266 interrupt-parent = <&gpio_intc>;270 interrupt-parent = <&gpio_intc>;
267 /* MAC_INTR on GPIOZ_14 */271 /* MAC_INTR on GPIOZ_14 */
268 interrupts = <26 IRQ_TYPE_LEVEL_LOW>;272 interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts+1−1
@@ -185,7 +185,7 @@ · 184 unmodified lines
185 regulator-min-microvolt = <690000>;185 regulator-min-microvolt = <690000>;
186 regulator-max-microvolt = <1050000>;186 regulator-max-microvolt = <1050000>;
187 187
188 vin-supply = <&dc_in>;188 pwm-supply = <&dc_in>;
189 189
190 pwms = <&pwm_AO_cd 1 1500 0>;190 pwms = <&pwm_AO_cd 1 1500 0>;
191 pwm-dutycycle-range = <100 0>;191 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/apple/t8103-j274.dts+23−0
@@ -17,6 +17,7 @@ · 16 unmodified lines
17 17
18 aliases {18 aliases {
19 serial0 = &serial0;19 serial0 = &serial0;
20 ethernet0 = &ethernet0;
20 };21 };
21 22
22 chosen {23 chosen {
@@ -43,3 +44,25 @@ · 20 unmodified lines
43&serial0 {44&serial0 {
44 status = "okay";45 status = "okay";
45};46};
47
48/*
49 * Force the bus number assignments so that we can declare some of the
50 * on-board devices and properties that are populated by the bootloader
51 * (such as MAC addresses).
52 */
53&port00 {
54 bus-range = <1 1>;
55};
56
57&port01 {
58 bus-range = <2 2>;
59};
60
61&port02 {
62 bus-range = <3 3>;
63 ethernet0: pci@0,0 {
64 reg = <0x30000 0x0 0x0 0x0 0x0>;
65 /* To be filled by the loader */
66 local-mac-address = [00 10 18 00 00 00];
67 };
68};
arch/arm64/boot/dts/apple/t8103.dtsi+207−0
@@ -9,6 +9,7 @@ · 8 unmodified lines
9 9
10#include <dt-bindings/interrupt-controller/apple-aic.h>10#include <dt-bindings/interrupt-controller/apple-aic.h>
11#include <dt-bindings/interrupt-controller/irq.h>11#include <dt-bindings/interrupt-controller/irq.h>
12#include <dt-bindings/pinctrl/apple.h>
12 13
13/ {14/ {
14 compatible = "apple,t8103", "apple,arm-platform";15 compatible = "apple,t8103", "apple,arm-platform";
@@ -131,5 +132,211 @@ · 116 unmodified lines
131 interrupt-controller;132 interrupt-controller;
132 reg = <0x2 0x3b100000 0x0 0x8000>;133 reg = <0x2 0x3b100000 0x0 0x8000>;
133 };134 };
135
136 pinctrl_ap: pinctrl@23c100000 {
137 compatible = "apple,t8103-pinctrl", "apple,pinctrl";
138 reg = <0x2 0x3c100000 0x0 0x100000>;
139
140 gpio-controller;
141 #gpio-cells = <2>;
142 gpio-ranges = <&pinctrl_ap 0 0 212>;
143 apple,npins = <212>;
144
145 interrupt-controller;
146 interrupt-parent = <&aic>;
147 interrupts = <AIC_IRQ 190 IRQ_TYPE_LEVEL_HIGH>,
148 <AIC_IRQ 191 IRQ_TYPE_LEVEL_HIGH>,
149 <AIC_IRQ 192 IRQ_TYPE_LEVEL_HIGH>,
150 <AIC_IRQ 193 IRQ_TYPE_LEVEL_HIGH>,
151 <AIC_IRQ 194 IRQ_TYPE_LEVEL_HIGH>,
152 <AIC_IRQ 195 IRQ_TYPE_LEVEL_HIGH>,
153 <AIC_IRQ 196 IRQ_TYPE_LEVEL_HIGH>;
154
155 pcie_pins: pcie-pins {
156 pinmux = <APPLE_PINMUX(150, 1)>,
157 <APPLE_PINMUX(151, 1)>,
158 <APPLE_PINMUX(32, 1)>;
159 };
160 };
161
162 pinctrl_aop: pinctrl@24a820000 {
163 compatible = "apple,t8103-pinctrl", "apple,pinctrl";
164 reg = <0x2 0x4a820000 0x0 0x4000>;
165
166 gpio-controller;
167 #gpio-cells = <2>;
168 gpio-ranges = <&pinctrl_aop 0 0 42>;
169 apple,npins = <42>;
170
171 interrupt-controller;
172 interrupt-parent = <&aic>;
173 interrupts = <AIC_IRQ 268 IRQ_TYPE_LEVEL_HIGH>,
174 <AIC_IRQ 269 IRQ_TYPE_LEVEL_HIGH>,
175 <AIC_IRQ 270 IRQ_TYPE_LEVEL_HIGH>,
176 <AIC_IRQ 271 IRQ_TYPE_LEVEL_HIGH>,
177 <AIC_IRQ 272 IRQ_TYPE_LEVEL_HIGH>,
178 <AIC_IRQ 273 IRQ_TYPE_LEVEL_HIGH>,
179 <AIC_IRQ 274 IRQ_TYPE_LEVEL_HIGH>;
180 };
181
182 pinctrl_nub: pinctrl@23d1f0000 {
183 compatible = "apple,t8103-pinctrl", "apple,pinctrl";
184 reg = <0x2 0x3d1f0000 0x0 0x4000>;
185
186 gpio-controller;
187 #gpio-cells = <2>;
188 gpio-ranges = <&pinctrl_nub 0 0 23>;
189 apple,npins = <23>;
190
191 interrupt-controller;
192 interrupt-parent = <&aic>;
193 interrupts = <AIC_IRQ 330 IRQ_TYPE_LEVEL_HIGH>,
194 <AIC_IRQ 331 IRQ_TYPE_LEVEL_HIGH>,
195 <AIC_IRQ 332 IRQ_TYPE_LEVEL_HIGH>,
196 <AIC_IRQ 333 IRQ_TYPE_LEVEL_HIGH>,
197 <AIC_IRQ 334 IRQ_TYPE_LEVEL_HIGH>,
198 <AIC_IRQ 335 IRQ_TYPE_LEVEL_HIGH>,
199 <AIC_IRQ 336 IRQ_TYPE_LEVEL_HIGH>;
200 };
201
202 pinctrl_smc: pinctrl@23e820000 {
203 compatible = "apple,t8103-pinctrl", "apple,pinctrl";
204 reg = <0x2 0x3e820000 0x0 0x4000>;
205
206 gpio-controller;
207 #gpio-cells = <2>;
208 gpio-ranges = <&pinctrl_smc 0 0 16>;
209 apple,npins = <16>;
210
211 interrupt-controller;
212 interrupt-parent = <&aic>;
213 interrupts = <AIC_IRQ 391 IRQ_TYPE_LEVEL_HIGH>,
214 <AIC_IRQ 392 IRQ_TYPE_LEVEL_HIGH>,
215 <AIC_IRQ 393 IRQ_TYPE_LEVEL_HIGH>,
216 <AIC_IRQ 394 IRQ_TYPE_LEVEL_HIGH>,
217 <AIC_IRQ 395 IRQ_TYPE_LEVEL_HIGH>,
218 <AIC_IRQ 396 IRQ_TYPE_LEVEL_HIGH>,
219 <AIC_IRQ 397 IRQ_TYPE_LEVEL_HIGH>;

123 more lines aren’t shown here.

arch/arm64/boot/dts/arm/juno-motherboard.dtsi+19−8

This diff is large: its 84 lines aren’t shown here.

arch/arm64/boot/dts/broadcom/Makefile+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts+2−0

This diff is large: its 3 lines aren’t shown here.

arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi+8−8

This diff is large: its 33 lines aren’t shown here.

arch/arm64/boot/dts/exynos/Makefile+2−1

This diff is large: its 7 lines aren’t shown here.

arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi+5−5

This diff is large: its 45 lines aren’t shown here.

arch/arm64/boot/dts/exynos/exynos5433-tm2.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/exynos/exynos5433.dtsi+3−3

This diff is large: its 27 lines aren’t shown here.

arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi+1189−0

This diff is large: its 1190 lines aren’t shown here.

arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts+56−0

This diff is large: its 57 lines aren’t shown here.

arch/arm64/boot/dts/exynos/exynosautov9.dtsi+306−0

This diff is large: its 307 lines aren’t shown here.

arch/arm64/boot/dts/freescale/Makefile+4−0

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts+28−32

This diff is large: its 80 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts+4−13

This diff is large: its 40 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts+23−26

This diff is large: its 65 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts+18−13

This diff is large: its 53 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts+9−1

This diff is large: its 21 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts+10−9

This diff is large: its 42 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi+45−27

This diff is large: its 140 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi+20−20

This diff is large: its 103 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi+20−20

This diff is large: its 103 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts+34−0

This diff is large: its 35 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts+658−0

This diff is large: its 659 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi+12−12

This diff is large: its 31 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts+29−3

This diff is large: its 52 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi+3−1

This diff is large: its 25 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi+1−1

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi+1−1

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi+1−1

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts+24−0

This diff is large: its 45 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mm.dtsi+180−0

This diff is large: its 222 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mp.dtsi+1−1

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi+43−3

This diff is large: its 124 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi+2−0

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mq.dtsi+4−6

This diff is large: its 26 lines aren’t shown here.

arch/arm64/boot/dts/freescale/s32g2.dtsi+124−0

This diff is large: its 125 lines aren’t shown here.

arch/arm64/boot/dts/freescale/s32g274a-evb.dts+34−0

This diff is large: its 35 lines aren’t shown here.

arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts+40−0

This diff is large: its 41 lines aren’t shown here.

arch/arm64/boot/dts/hisilicon/hi3660.dtsi+4−4

This diff is large: its 36 lines aren’t shown here.

arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts+3−19

This diff is large: its 43 lines aren’t shown here.

arch/arm64/boot/dts/hisilicon/hi3670.dtsi+1−1

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/hisilicon/hi6220.dtsi+2−2

This diff is large: its 18 lines aren’t shown here.

arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi+86−0

This diff is large: its 87 lines aren’t shown here.

arch/arm64/boot/dts/marvell/Makefile+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts+458−0

This diff is large: its 459 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt2712e.dtsi+50−47

This diff is large: its 115 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt6358.dtsi+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts+7−9

This diff is large: its 26 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts+1−5

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt7622.dtsi+60−52

This diff is large: its 136 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8173.dtsi+2−0

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi+13−0

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi+13−0

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi+54−0

This diff is large: its 55 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi+13−0

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi+13−0

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi+13−0

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi+13−0

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi+32−0

This diff is large: its 33 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi+5−0

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi+63−4

This diff is large: its 90 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183.dtsi+96−3

This diff is large: its 134 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8192.dtsi+163−0

This diff is large: its 239 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra132-norrin.dts+0−2

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra132.dtsi+9−3

This diff is large: its 69 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts+1399−155

This diff is large: its 1840 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts+505−1

This diff is large: its 518 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra186.dtsi+136−0

This diff is large: its 150 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts+1368−127

This diff is large: its 1679 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi+1383−139

This diff is large: its 1738 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra194.dtsi+204−5

This diff is large: its 269 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts+876−0

This diff is large: its 897 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts+876−0

This diff is large: its 897 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra210.dtsi+79−2

This diff is large: its 102 lines aren’t shown here.

arch/arm64/boot/dts/qcom/Makefile+12−0

This diff is large: its 53 lines aren’t shown here.

arch/arm64/boot/dts/qcom/apq8016-sbc.dts+831−1

This diff is large: its 841 lines aren’t shown here.

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi+0−826

This diff is large: its 827 lines aren’t shown here.

arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/apq8096-db820c.dts+1069−1

This diff is large: its 1079 lines aren’t shown here.

arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi+0−1105

This diff is large: its 1106 lines aren’t shown here.

arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts+0−3

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/qcom/ipq6018.dtsi+87−6

This diff is large: its 121 lines aren’t shown here.

arch/arm64/boot/dts/qcom/ipq8074-hk01.dts+6−0

This diff is large: its 24 lines aren’t shown here.

arch/arm64/boot/dts/qcom/ipq8074.dtsi+76−16

This diff is large: its 183 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts+126−0

This diff is large: its 165 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts+44−19

This diff is large: its 146 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-mtp.dts+14−1

This diff is large: its 24 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi+0−21

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts+534−0

This diff is large: its 535 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916.dtsi+73−16

This diff is large: its 186 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts+1−0

This diff is large: its 6 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts+1−0

This diff is large: its 6 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994.dtsi+1−1

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-mtp.dts+23−1

This diff is large: its 33 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi+0−30

This diff is large: its 31 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts+1−0

This diff is large: its 6 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi+673−0

This diff is large: its 674 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts+465−0

This diff is large: its 466 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts+432−0

This diff is large: its 433 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996.dtsi+86−10

This diff is large: its 218 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts+320−0

This diff is large: its 321 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi+0−4

This diff is large: its 11 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi+0−4

This diff is large: its 11 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts+31−0

This diff is large: its 32 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts+55−0

This diff is large: its 56 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts+36−0

This diff is large: its 37 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi+670−0

This diff is large: its 671 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998.dtsi+200−23

This diff is large: its 354 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pm6150l.dtsi+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pm6350.dtsi+54−0

This diff is large: its 55 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pm660.dtsi+3−2

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pm660l.dtsi+0−7

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pm8916.dtsi+12−6

This diff is large: its 39 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pm8994.dtsi+4−9

This diff is large: its 23 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pmi8994.dtsi+1−4

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pmi8998.dtsi+12−0

This diff is large: its 18 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pmk8350.dtsi+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/qcs404.dtsi+6−1

This diff is large: its 21 lines aren’t shown here.

arch/arm64/boot/dts/qcom/qrb5165-rb5.dts+2−2

This diff is large: its 19 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sa8155p-adp.dts+10−2

This diff is large: its 27 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts+14−0

This diff is large: its 21 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi+2−1

This diff is large: its 17 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts+20−0

This diff is large: its 21 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts+15−0

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi+336−0

This diff is large: its 337 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi+13−0

This diff is large: its 27 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi+11−0

This diff is large: its 15 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi+109−0

This diff is large: its 110 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts+8−0

This diff is large: its 15 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts+8−0

This diff is large: its 12 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi+5−4

This diff is large: its 44 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi+90−0

This diff is large: its 91 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi+2−99

This diff is large: its 141 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180.dtsi+52−33

This diff is large: its 255 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7280-herobrine.dts+14−0

This diff is large: its 15 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi+1412−0

This diff is large: its 1413 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7280-idp.dts+12−0

This diff is large: its 19 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7280-idp.dtsi+265−6

This diff is large: its 330 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7280-idp2.dts+8−0

This diff is large: its 12 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7280.dtsi+2769−793

This diff is large: its 3898 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts+1−0

This diff is large: its 6 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts+1−0

This diff is large: its 6 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi+4−4

This diff is large: its 35 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm630.dtsi+57−1

This diff is large: its 79 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi+12−5

This diff is large: its 52 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845-db845c.dts+11−5

This diff is large: its 52 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845-mtp.dts+10−8

This diff is large: its 54 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi+17−9

This diff is large: its 82 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts+11−8

This diff is large: its 62 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845.dtsi+73−170

This diff is large: its 498 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts+16−5

This diff is large: its 79 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm6125.dtsi+32−27

This diff is large: its 142 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts+58−0

This diff is large: its 59 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm6350.dtsi+965−0

This diff is large: its 966 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts+320−0

This diff is large: its 321 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm7225.dtsi+16−0

This diff is large: its 17 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8150-hdk.dts+0−2

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts+1−2

This diff is large: its 18 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8150-mtp.dts+0−2

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts+1−0

This diff is large: its 6 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8150.dtsi+142−19

This diff is large: its 270 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8250-hdk.dts+0−2

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8250-mtp.dts+0−2

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8250.dtsi+26−26

This diff is large: its 161 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8350-hdk.dts+0−2

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8350-mtp.dts+4−2

This diff is large: its 21 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8350.dtsi+282−20

This diff is large: its 488 lines aren’t shown here.

arch/arm64/boot/dts/renesas/Makefile+2−0

This diff is large: its 7 lines aren’t shown here.

arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi+3−0

This diff is large: its 17 lines aren’t shown here.

arch/arm64/boot/dts/renesas/cat875.dtsi+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/renesas/draak.dtsi+686−0

This diff is large: its 687 lines aren’t shown here.

arch/arm64/boot/dts/renesas/ebisu.dtsi+803−0

This diff is large: its 804 lines aren’t shown here.

arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a77961.dtsi+11−0

This diff is large: its 18 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a77970-eagle.dts+4−0

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts+4−0

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a77980-condor.dts+4−0

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts+4−0

This diff is large: its 21 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts+1−787

This diff is large: its 797 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a77995-draak.dts+1−670

This diff is large: its 680 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi+70−0

This diff is large: its 104 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779a0.dtsi+1458−0

This diff is large: its 1489 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m0.dtsi+12−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m1.dtsi+9−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m2.dtsi+12−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m3.dtsi+9−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m4.dtsi+12−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts+36−0

This diff is large: its 37 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m5.dtsi+21−0

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m6.dtsi+12−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m7.dtsi+12−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m8.dtsi+12−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r9a07g044.dtsi+337−0

This diff is large: its 372 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts+1−6

This diff is large: its 17 lines aren’t shown here.

arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi+275−0

This diff is large: its 276 lines aren’t shown here.

arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi+289−3

This diff is large: its 312 lines aren’t shown here.

arch/arm64/boot/dts/renesas/salvator-common.dtsi+30−26

This diff is large: its 85 lines aren’t shown here.

arch/arm64/boot/dts/renesas/ulcb.dtsi+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/Makefile+6−0

This diff is large: its 34 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/px30-evb.dts+52−0

This diff is large: its 73 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/px30.dtsi+120−6

This diff is large: its 203 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3308.dtsi+43−6

This diff is large: its 105 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts+0−3

This diff is large: its 17 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts+27−1

This diff is large: its 56 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts+110−0

This diff is large: its 111 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3328-rock64.dts+1−1

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3328.dtsi+6−11

This diff is large: its 94 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi+33−14

This diff is large: its 109 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3368.dtsi+182−9

This diff is large: its 281 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi+176−0

This diff is large: its 183 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts+41−0

This diff is large: its 42 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi+182−0

This diff is large: its 196 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi+2−2

This diff is large: its 18 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts+36−0

This diff is large: its 62 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi+3−3

This diff is large: its 27 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi+3−3

This diff is large: its 27 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts+2−5

This diff is large: its 28 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts+218−0

This diff is large: its 219 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi+54−0

This diff is large: its 82 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts+14−0

This diff is large: its 15 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts+47−0

This diff is large: its 48 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi+29−0

This diff is large: its 43 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399.dtsi+104−12

This diff is large: its 239 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts+548−0

This diff is large: its 549 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3566.dtsi+20−0

This diff is large: its 21 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts+313−0

This diff is large: its 331 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi+9−0

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3568.dtsi+74−570

This diff is large: its 666 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk356x.dtsi+1145−0

This diff is large: its 1146 lines aren’t shown here.

arch/arm64/boot/dts/ti/Makefile+3−1

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am64-main.dtsi+280−0

This diff is large: its 285 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi+8−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am64.dtsi+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am642-evm.dts+8−0

This diff is large: its 12 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am642-sk.dts+8−0

This diff is large: its 12 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi+46−0

This diff is large: its 47 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi+51−0

This diff is large: its 52 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi+28−11

This diff is large: its 86 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am65-main.dtsi+4−4

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi+0−4

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am65.dtsi+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi+60−0

This diff is large: its 61 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts+24−0

This diff is large: its 25 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts+7−49

This diff is large: its 71 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am654.dtsi+4−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi+56−0

This diff is large: its 57 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts+29−0

This diff is large: its 30 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts+7−43

This diff is large: its 65 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts+3−0

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-j7200-main.dtsi+4−3

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-j7200.dtsi+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts+3−0

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-j721e-main.dtsi+8−8

This diff is large: its 72 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-j721e-sk.dts+1002−0

This diff is large: its 1003 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-j721e.dtsi+3−0

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/toshiba/Makefile+1−0

This diff is large: its 4 lines aren’t shown here.

arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts+6−0

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts+61−0

This diff is large: its 62 lines aren’t shown here.

arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi+44−0

This diff is large: its 45 lines aren’t shown here.

arch/arm64/boot/dts/toshiba/tmpv7708.dtsi+59−0

This diff is large: its 87 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/Makefile+14−0

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi+12−1

This diff is large: its 27 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts+315−0

This diff is large: its 316 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts+298−0

This diff is large: its 299 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts+289−0

This diff is large: its 290 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts+21−0

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts+15−1

This diff is large: its 37 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts+15−1

This diff is large: its 37 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts+17−1

This diff is large: its 39 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts+297−1

This diff is large: its 380 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts+337−5

This diff is large: its 444 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts+48−1

This diff is large: its 104 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts+23−1

This diff is large: its 49 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts+329−1

This diff is large: its 393 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts+258−6

This diff is large: its 362 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts+15−0

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts+318−2

This diff is large: its 426 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts+2−1

This diff is large: its 17 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts+282−10

This diff is large: its 400 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts+239−11

This diff is large: its 347 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts+327−13

This diff is large: its 443 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts+264−10

This diff is large: its 378 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp.dtsi+61−32

This diff is large: its 176 lines aren’t shown here.

drivers/watchdog/mtk_wdt.c+3−3

This diff is large: its 13 lines aren’t shown here.

include/dt-bindings/power/imx8mm-power.h+9−0

This diff is large: its 14 lines aren’t shown here.

include/dt-bindings/reset/mt2712-resets.hrenamed from include/dt-bindings/reset-controller/mt2712-resets.h+0−0

File renamed without changes.

include/dt-bindings/reset/mt8173-resets.h+2−0

This diff is large: its 9 lines aren’t shown here.

include/dt-bindings/reset/mt8183-resets.hrenamed from include/dt-bindings/reset-controller/mt8183-resets.h+3−0

This diff is large: its 10 lines aren’t shown here.

include/dt-bindings/reset/mt8192-resets.hrenamed from include/dt-bindings/reset-controller/mt8192-resets.h+0−0

File renamed without changes.

Keyboard shortcuts

General

Show keyboard shortcuts
?
Focus the current search
/

Issues and pull requests

Open filters
f

Issues, pull requests and Inbox

Select next item
j↓
Select previous item
k↑
Open selected item
Enter
Dismiss filters or clear selection
Esc

Repository code

Go to file
t