History

target: Fix error checking for UNMAP commands

SBC-3 (revision 35) says: The PARAMETER LIST LENGTH field specifies the length in bytes of the UNMAP parameter list that is available to be transferred from the Data-Out Buffer. If the parameter list length is greater than zero and less than 0008h (i.e., eight), then the device server shall terminate the command with CHECK CONDITION status with the sense key set to ILLEGAL REQUEST and the additional sense code set to PARAMETER LIST LENGTH ERROR. A PARAMETER LIST LENGTH set to zero specifies that no data shall be sent. so our sense code for too-short descriptors was wrong, and we were incorrectly failing commands that didn't transfer any descriptors. While we're at it, also handle the UNMAP check: If the ANCHOR bit is set to one, and the ANC_SUP bit in the Logical Block Provisioning VPD page (see 6.6.4) is set to zero, then the device server shall terminate the command with CHECK CONDITION status with the sense key set to ILLEGAL REQUEST and the additional sense code set to INVALID FIELD IN CDB. (chris boot: Fix wrong cut+paste comment in transport_send_check_condition_and_sense)

Roland Dreier committed 13 years ago

Commit bb992e71 parent 33633673 files · +21 −1Browse files

Unified · Split

3 files
  1. drivers/target/target_core_iblock.c +10 −1
  2. drivers/target/target_core_transport.c +10 −0
  3. include/target/target_core_base.h +1 −0
drivers/target/target_core_iblock.c+10−1
@@ -391,10 +391,19 @@ iblock_execute_unmap(struct se_cmd *cmd) · 390 unmodified lines
391 sense_reason_t ret = 0;391 sense_reason_t ret = 0;
392 int dl, bd_dl, err;392 int dl, bd_dl, err;
393 393
394 /* We never set ANC_SUP */
395 if (cmd->t_task_cdb[1])
396 return TCM_INVALID_CDB_FIELD;
397
398 if (cmd->data_length == 0) {
399 target_complete_cmd(cmd, SAM_STAT_GOOD);
400 return 0;
401 }
402
394 if (cmd->data_length < 8) {403 if (cmd->data_length < 8) {
395 pr_warn("UNMAP parameter list length %u too small\n",404 pr_warn("UNMAP parameter list length %u too small\n",
396 cmd->data_length);405 cmd->data_length);
397 return TCM_INVALID_PARAMETER_LIST;406 return TCM_PARAMETER_LIST_LENGTH_ERROR;
398 }407 }
399 408
400 buf = transport_kmap_data_sg(cmd);409 buf = transport_kmap_data_sg(cmd);
drivers/target/target_core_transport.c+10−0
@@ -1517,6 +1517,7 @@ void transport_generic_request_failure(struct se_cmd *cmd, · 1516 unmodified lines
1517 case TCM_UNSUPPORTED_SCSI_OPCODE:1517 case TCM_UNSUPPORTED_SCSI_OPCODE:
1518 case TCM_INVALID_CDB_FIELD:1518 case TCM_INVALID_CDB_FIELD:
1519 case TCM_INVALID_PARAMETER_LIST:1519 case TCM_INVALID_PARAMETER_LIST:
1520 case TCM_PARAMETER_LIST_LENGTH_ERROR:
1520 case TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE:1521 case TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE:
1521 case TCM_UNKNOWN_MODE_PAGE:1522 case TCM_UNKNOWN_MODE_PAGE:
1522 case TCM_WRITE_PROTECTED:1523 case TCM_WRITE_PROTECTED:
@@ -2677,6 +2678,15 @@ transport_send_check_condition_and_sense(struct se_cmd *cmd, · 1154 unmodified lines
2677 /* INVALID FIELD IN PARAMETER LIST */2678 /* INVALID FIELD IN PARAMETER LIST */
2678 buffer[SPC_ASC_KEY_OFFSET] = 0x26;2679 buffer[SPC_ASC_KEY_OFFSET] = 0x26;
2679 break;2680 break;
2681 case TCM_PARAMETER_LIST_LENGTH_ERROR:
2682 /* CURRENT ERROR */
2683 buffer[0] = 0x70;
2684 buffer[SPC_ADD_SENSE_LEN_OFFSET] = 10;
2685 /* ILLEGAL REQUEST */
2686 buffer[SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST;
2687 /* PARAMETER LIST LENGTH ERROR */
2688 buffer[SPC_ASC_KEY_OFFSET] = 0x1a;
2689 break;
2680 case TCM_UNEXPECTED_UNSOLICITED_DATA:2690 case TCM_UNEXPECTED_UNSOLICITED_DATA:
2681 /* CURRENT ERROR */2691 /* CURRENT ERROR */
2682 buffer[0] = 0x70;2692 buffer[0] = 0x70;
include/target/target_core_base.h+1−0
@@ -195,6 +195,7 @@ enum tcm_sense_reason_table { · 194 unmodified lines
195 TCM_RESERVATION_CONFLICT = R(0x10),195 TCM_RESERVATION_CONFLICT = R(0x10),
196 TCM_ADDRESS_OUT_OF_RANGE = R(0x11),196 TCM_ADDRESS_OUT_OF_RANGE = R(0x11),
197 TCM_OUT_OF_RESOURCES = R(0x12),197 TCM_OUT_OF_RESOURCES = R(0x12),
198 TCM_PARAMETER_LIST_LENGTH_ERROR = R(0x13),
198#undef R199#undef R
199};200};
200 201

Keyboard shortcuts

General

Show keyboard shortcuts
?
Focus the current search
/

Issues and pull requests

Open filters
f

Issues, pull requests and Inbox

Select next item
j↓
Select previous item
k↑
Open selected item
Enter
Dismiss filters or clear selection
Esc

Repository code

Go to file
t