lael-labs/linux

include/uapi/asm-generic/unistd.h+14−1

@@ -829,8 +829,21 @@ __SYSCALL(__NR_futex_wait, sys_futex_wait) · 828 unmodified lines
829	#define __NR_futex_requeue 456	829	#define __NR_futex_requeue 456
830	__SYSCALL(__NR_futex_requeue, sys_futex_requeue)	830	__SYSCALL(__NR_futex_requeue, sys_futex_requeue)
831		831
		832	#define __NR_statmount 457
		833	__SYSCALL(__NR_statmount, sys_statmount)
		834
		835	#define __NR_listmount 458
		836	__SYSCALL(__NR_listmount, sys_listmount)
		837
		838	#define __NR_lsm_get_self_attr 459
		839	__SYSCALL(__NR_lsm_get_self_attr, sys_lsm_get_self_attr)
		840	#define __NR_lsm_set_self_attr 460
		841	__SYSCALL(__NR_lsm_set_self_attr, sys_lsm_set_self_attr)
		842	#define __NR_lsm_list_modules 461
		843	__SYSCALL(__NR_lsm_list_modules, sys_lsm_list_modules)
		844
832	#undef __NR_syscalls	845	#undef __NR_syscalls
833	#define __NR_syscalls 457	846	#define __NR_syscalls 462
834		847
835	/*	848	/*
836	* 32 bit systems traditionally used different	849	* 32 bit systems traditionally used different

include/uapi/drm/drm_fourcc.h+5−5

include/uapi/drm/drm_mode.h+17−9

 /**
  * DOC: overview
  *
- * DRM exposes many UAPI and structure definition to have a consistent
+ * DRM exposes many UAPI and structure definitions to have a consistent
- * and standardized interface with user.
+ * and standardized interface with users.
  * Userspace can refer to these structure definitions and UAPI formats
- * to communicate to driver
+ * to communicate to drivers.
  */
 #define DRM_CONNECTOR_NAME_LEN	32
 /* the PROP_ATOMIC flag is used to hide properties from userspace that
  * is not aware of atomic properties.  This is mostly to work around
  * older userspace (DDX drivers) that read/write each prop they find,
- * witout being aware that this could be triggering a lengthy modeset.
+ * without being aware that this could be triggering a lengthy modeset.
  */
 #define DRM_MODE_PROP_ATOMIC        0x80000000
 };
 #define DRM_MODE_FB_INTERLACED	(1<<0) /* for interlaced framebuffers */
-#define DRM_MODE_FB_MODIFIERS	(1<<1) /* enables ->modifer[] */
+#define DRM_MODE_FB_MODIFIERS	(1<<1) /* enables ->modifier[] */
 /**
  * struct drm_mode_fb_cmd2 - Frame-buffer metadata.
 	__u64 matrix[9];
 };
+struct drm_color_ctm_3x4 {
+	/*
+	 * Conversion matrix with 3x4 dimensions in S31.32 sign-magnitude
+	 * (not two's complement!) format.
+	 */
+	__u64 matrix[12];
+};
 struct drm_color_lut {
 	/*
 	 * Values are mapped linearly to 0.0 - 1.0 range, with 0x0 == 0.0 and
 	 * These are coded as unsigned 16-bit values in units of
 	 * 0.00002, where 0x0000 represents zero and 0xC350
 	 * represents 1.0000.
-	 * @display_primaries.x: X cordinate of color primary.
+	 * @display_primaries.x: X coordinate of color primary.
-	 * @display_primaries.y: Y cordinate of color primary.
+	 * @display_primaries.y: Y coordinate of color primary.
 	 */
 	struct {
 		__u16 x, y;
 	 * These are coded as unsigned 16-bit values in units of
 	 * 0.00002, where 0x0000 represents zero and 0xC350
 	 * represents 1.0000.
-	 * @white_point.x: X cordinate of whitepoint of color primary.
+	 * @white_point.x: X coordinate of whitepoint of color primary.
-	 * @white_point.y: Y cordinate of whitepoint of color primary.
+	 * @white_point.y: Y coordinate of whitepoint of color primary.
 	 */
 	struct {
 		__u16 x, y;

include/uapi/drm/habanalabs_accel.h+28−0

@@ -846,6 +846,7 @@ enum hl_server_type { · 845 unmodified lines
846	#define HL_INFO_HW_ERR_EVENT 36	846	#define HL_INFO_HW_ERR_EVENT 36
847	#define HL_INFO_FW_ERR_EVENT 37	847	#define HL_INFO_FW_ERR_EVENT 37
848	#define HL_INFO_USER_ENGINE_ERR_EVENT 38	848	#define HL_INFO_USER_ENGINE_ERR_EVENT 38
		849	#define HL_INFO_DEV_SIGNED 40
849		850
850	#define HL_INFO_VERSION_MAX_LEN 128	851	#define HL_INFO_VERSION_MAX_LEN 128
851	#define HL_INFO_CARD_NAME_MAX_LEN 16	852	#define HL_INFO_CARD_NAME_MAX_LEN 16
@@ -1256,6 +1257,7 @@ struct hl_info_dev_memalloc_page_sizes { · 404 unmodified lines
1256	#define SEC_SIGNATURE_BUF_SZ 255 /* (256 - 1) 1 byte used for size */	1257	#define SEC_SIGNATURE_BUF_SZ 255 /* (256 - 1) 1 byte used for size */
1257	#define SEC_PUB_DATA_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */	1258	#define SEC_PUB_DATA_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */
1258	#define SEC_CERTIFICATE_BUF_SZ 2046 /* (2048 - 2) 2 bytes used for size */	1259	#define SEC_CERTIFICATE_BUF_SZ 2046 /* (2048 - 2) 2 bytes used for size */
		1260	#define SEC_DEV_INFO_BUF_SZ 5120
1259		1261
1260	/*	1262	/*
1261	* struct hl_info_sec_attest - attestation report of the boot	1263	* struct hl_info_sec_attest - attestation report of the boot
@@ -1290,6 +1292,32 @@ struct hl_info_sec_attest { · 28 unmodified lines
1290	__u8 pad0[2];	1292	__u8 pad0[2];
1291	};	1293	};
1292		1294
		1295	/*
		1296	* struct hl_info_signed - device information signed by a secured device.
		1297	* @nonce: number only used once. random number provided by host. this also passed to the quote
		1298	* command as a qualifying data.
		1299	* @pub_data_len: length of the public data (bytes)
		1300	* @certificate_len: length of the certificate (bytes)
		1301	* @info_sig_len: length of the attestation signature (bytes)
		1302	* @public_data: public key info signed info data (outPublic + name + qualifiedName)
		1303	* @certificate: certificate for the signing key
		1304	* @info_sig: signature of the info + nonce data.
		1305	* @dev_info_len: length of device info (bytes)
		1306	* @dev_info: device info as byte array.
		1307	*/
		1308	struct hl_info_signed {
		1309	__u32 nonce;
		1310	__u16 pub_data_len;
		1311	__u16 certificate_len;
		1312	__u8 info_sig_len;
		1313	__u8 public_data[SEC_PUB_DATA_BUF_SZ];
		1314	__u8 certificate[SEC_CERTIFICATE_BUF_SZ];
		1315	__u8 info_sig[SEC_SIGNATURE_BUF_SZ];
		1316	__u16 dev_info_len;
		1317	__u8 dev_info[SEC_DEV_INFO_BUF_SZ];
		1318	__u8 pad[2];
		1319	};
		1320
1293	/**	1321	/**
1294	* struct hl_page_fault_info - page fault information.	1322	* struct hl_page_fault_info - page fault information.
1295	* @timestamp: timestamp of page fault.	1323	* @timestamp: timestamp of page fault.

include/uapi/drm/i915_drm.h+6−6

@@ -693,7 +693,7 @@ typedef struct drm_i915_irq_wait { · 692 unmodified lines
693	#define I915_PARAM_HAS_EXEC_FENCE 44	693	#define I915_PARAM_HAS_EXEC_FENCE 44
694		694
695	/* Query whether DRM_I915_GEM_EXECBUFFER2 supports the ability to capture	695	/* Query whether DRM_I915_GEM_EXECBUFFER2 supports the ability to capture
696	* user specified bufffers for post-mortem debugging of GPU hangs. See	696	* user-specified buffers for post-mortem debugging of GPU hangs. See
697	* EXEC_OBJECT_CAPTURE.	697	* EXEC_OBJECT_CAPTURE.
698	*/	698	*/
699	#define I915_PARAM_HAS_EXEC_CAPTURE 45	699	#define I915_PARAM_HAS_EXEC_CAPTURE 45
@@ -1606,7 +1606,7 @@ struct drm_i915_gem_busy { · 906 unmodified lines
1606	* is accurate.	1606	* is accurate.
1607	*	1607	*
1608	* The returned dword is split into two fields to indicate both	1608	* The returned dword is split into two fields to indicate both
1609	* the engine classess on which the object is being read, and the	1609	* the engine classes on which the object is being read, and the
1610	* engine class on which it is currently being written (if any).	1610	* engine class on which it is currently being written (if any).
1611	*	1611	*
1612	* The low word (bits 0:15) indicate if the object is being written	1612	* The low word (bits 0:15) indicate if the object is being written
@@ -1815,7 +1815,7 @@ struct drm_i915_gem_madvise { · 202 unmodified lines
1815	__u32 handle;	1815	__u32 handle;
1816		1816
1817	/* Advice: either the buffer will be needed again in the near future,	1817	/* Advice: either the buffer will be needed again in the near future,
1818	* or wont be and could be discarded under memory pressure.	1818	* or won't be and could be discarded under memory pressure.
1819	*/	1819	*/
1820	__u32 madv;	1820	__u32 madv;
1821		1821
@@ -3246,7 +3246,7 @@ struct drm_i915_query_topology_info { · 1424 unmodified lines
3246	* // enough to hold our array of engines. The kernel will fill out the	3246	* // enough to hold our array of engines. The kernel will fill out the
3247	* // item.length for us, which is the number of bytes we need.	3247	* // item.length for us, which is the number of bytes we need.
3248	* //	3248	* //
3249	* // Alternatively a large buffer can be allocated straight away enabling	3249	* // Alternatively a large buffer can be allocated straightaway enabling
3250	* // querying in one pass, in which case item.length should contain the	3250	* // querying in one pass, in which case item.length should contain the
3251	* // length of the provided buffer.	3251	* // length of the provided buffer.
3252	* err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);	3252	* err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
@@ -3256,7 +3256,7 @@ struct drm_i915_query_topology_info { · 3 unmodified lines
3256	* // Now that we allocated the required number of bytes, we call the ioctl	3256	* // Now that we allocated the required number of bytes, we call the ioctl
3257	* // again, this time with the data_ptr pointing to our newly allocated	3257	* // again, this time with the data_ptr pointing to our newly allocated
3258	* // blob, which the kernel can then populate with info on all engines.	3258	* // blob, which the kernel can then populate with info on all engines.
3259	* item.data_ptr = (uintptr_t)&info,	3259	* item.data_ptr = (uintptr_t)&info;
3260	*	3260	*
3261	* err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);	3261	* err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
3262	* if (err) ...	3262	* if (err) ...
@@ -3286,7 +3286,7 @@ struct drm_i915_query_topology_info { · 23 unmodified lines
3286	/**	3286	/**
3287	* struct drm_i915_engine_info	3287	* struct drm_i915_engine_info
3288	*	3288	*
3289	* Describes one engine and it's capabilities as known to the driver.	3289	* Describes one engine and its capabilities as known to the driver.
3290	*/	3290	*/
3291	struct drm_i915_engine_info {	3291	struct drm_i915_engine_info {
3292	/** @engine: Engine class and instance. */	3292	/** @engine: Engine class and instance. */

include/uapi/drm/msm_drm.h+3−0

 #define MSM_PARAM_CMDLINE    0x0d  /* WO: override for task cmdline */
 #define MSM_PARAM_VA_START   0x0e  /* RO: start of valid GPU iova range */
 #define MSM_PARAM_VA_SIZE    0x0f  /* RO: size of valid GPU iova range (bytes) */
+#define MSM_PARAM_HIGHEST_BANK_BIT 0x10 /* RO */
 /* For backwards compat.  The original support for preemption was based on
  * a single ring per priority level so # of priority levels equals the #
 #define MSM_INFO_GET_NAME	0x03   /* get debug name, returned by pointer */
 #define MSM_INFO_SET_IOVA	0x04   /* set the iova, passed by value */
 #define MSM_INFO_GET_FLAGS	0x05   /* get the MSM_BO_x flags */
+#define MSM_INFO_SET_METADATA	0x06   /* set userspace metadata */
+#define MSM_INFO_GET_METADATA	0x07   /* get userspace metadata */
 struct drm_msm_gem_info {
 	__u32 handle;         /* in */

include/uapi/linux/android/binder.h+16−14

@@ -251,20 +251,22 @@ struct binder_extended_error { · 250 unmodified lines
251	__s32 param;	251	__s32 param;
252	};	252	};
253		253
254	#define BINDER_WRITE_READ _IOWR('b', 1, struct binder_write_read)	254	enum {
255	#define BINDER_SET_IDLE_TIMEOUT _IOW('b', 3, __s64)	255	BINDER_WRITE_READ = _IOWR('b', 1, struct binder_write_read),
256	#define BINDER_SET_MAX_THREADS _IOW('b', 5, __u32)	256	BINDER_SET_IDLE_TIMEOUT = _IOW('b', 3, __s64),
257	#define BINDER_SET_IDLE_PRIORITY _IOW('b', 6, __s32)	257	BINDER_SET_MAX_THREADS = _IOW('b', 5, __u32),
258	#define BINDER_SET_CONTEXT_MGR _IOW('b', 7, __s32)	258	BINDER_SET_IDLE_PRIORITY = _IOW('b', 6, __s32),
259	#define BINDER_THREAD_EXIT _IOW('b', 8, __s32)	259	BINDER_SET_CONTEXT_MGR = _IOW('b', 7, __s32),
260	#define BINDER_VERSION _IOWR('b', 9, struct binder_version)	260	BINDER_THREAD_EXIT = _IOW('b', 8, __s32),
261	#define BINDER_GET_NODE_DEBUG_INFO _IOWR('b', 11, struct binder_node_debug_info)	261	BINDER_VERSION = _IOWR('b', 9, struct binder_version),
262	#define BINDER_GET_NODE_INFO_FOR_REF _IOWR('b', 12, struct binder_node_info_for_ref)	262	BINDER_GET_NODE_DEBUG_INFO = _IOWR('b', 11, struct binder_node_debug_info),
263	#define BINDER_SET_CONTEXT_MGR_EXT _IOW('b', 13, struct flat_binder_object)	263	BINDER_GET_NODE_INFO_FOR_REF = _IOWR('b', 12, struct binder_node_info_for_ref),
264	#define BINDER_FREEZE _IOW('b', 14, struct binder_freeze_info)	264	BINDER_SET_CONTEXT_MGR_EXT = _IOW('b', 13, struct flat_binder_object),
265	#define BINDER_GET_FROZEN_INFO _IOWR('b', 15, struct binder_frozen_status_info)	265	BINDER_FREEZE = _IOW('b', 14, struct binder_freeze_info),
266	#define BINDER_ENABLE_ONEWAY_SPAM_DETECTION _IOW('b', 16, __u32)	266	BINDER_GET_FROZEN_INFO = _IOWR('b', 15, struct binder_frozen_status_info),
267	#define BINDER_GET_EXTENDED_ERROR _IOWR('b', 17, struct binder_extended_error)	267	BINDER_ENABLE_ONEWAY_SPAM_DETECTION = _IOW('b', 16, __u32),
		268	BINDER_GET_EXTENDED_ERROR = _IOWR('b', 17, struct binder_extended_error),
		269	};
268		270
269	/*	271	/*
270	* NOTE: Two special error codes you should check for when calling	272	* NOTE: Two special error codes you should check for when calling

include/uapi/linux/batadv_packet.h+39−6

  * only need routable IPv4 multicast packets we signed up for explicitly
  * @BATADV_MCAST_WANT_NO_RTR6: we have no IPv6 multicast router and therefore
  * only need routable IPv6 multicast packets we signed up for explicitly
+ * @BATADV_MCAST_HAVE_MC_PTYPE_CAPA: we can parse, receive and forward
+ * batman-adv multicast packets with a multicast tracker TVLV. And all our
+ * hard interfaces have an MTU of at least 1280 bytes.
  */
 enum batadv_mcast_flags {
 	BATADV_MCAST_WANT_ALL_UNSNOOPABLES	= 1UL << 0,
 	BATADV_MCAST_WANT_ALL_IPV6		= 1UL << 2,
 	BATADV_MCAST_WANT_NO_RTR4		= 1UL << 3,
 	BATADV_MCAST_WANT_NO_RTR6		= 1UL << 4,
+	BATADV_MCAST_HAVE_MC_PTYPE_CAPA		= 1UL << 5,
 };
 /* tt data subtypes */
  * @BATADV_TVLV_TT: translation table tvlv
  * @BATADV_TVLV_ROAM: roaming advertisement tvlv
  * @BATADV_TVLV_MCAST: multicast capability tvlv
+ * @BATADV_TVLV_MCAST_TRACKER: multicast tracker tvlv
  */
 enum batadv_tvlv_type {
-	BATADV_TVLV_GW		= 0x01,
+	BATADV_TVLV_GW			= 0x01,
-	BATADV_TVLV_DAT		= 0x02,
+	BATADV_TVLV_DAT			= 0x02,
-	BATADV_TVLV_NC		= 0x03,
+	BATADV_TVLV_NC			= 0x03,
-	BATADV_TVLV_TT		= 0x04,
+	BATADV_TVLV_TT			= 0x04,
-	BATADV_TVLV_ROAM	= 0x05,
+	BATADV_TVLV_ROAM		= 0x05,
-	BATADV_TVLV_MCAST	= 0x06,
+	BATADV_TVLV_MCAST		= 0x06,
+	BATADV_TVLV_MCAST_TRACKER	= 0x07,
 };
 #pragma pack(2)
 	 */
 };
+/**
+ * struct batadv_mcast_packet - multicast packet for network payload
+ * @packet_type: batman-adv packet type, part of the general header
+ * @version: batman-adv protocol version, part of the general header
+ * @ttl: time to live for this packet, part of the general header
+ * @reserved: reserved byte for alignment
+ * @tvlv_len: length of the appended tvlv buffer (in bytes)
+ */
+struct batadv_mcast_packet {
+	__u8 packet_type;
+	__u8 version;
+	__u8 ttl;
+	__u8 reserved;
+	__be16 tvlv_len;
+	/* "4 bytes boundary + 2 bytes" long to make the payload after the
+	 * following ethernet header again 4 bytes boundary aligned
+	 */
+};
 /**
  * struct batadv_coded_packet - network coded packet
  * @packet_type: batman-adv packet type, part of the general header
 	__u8 reserved[3];
 };
+/**
+ * struct batadv_tvlv_mcast_tracker - payload of a multicast tracker tvlv
+ * @num_dests: number of subsequent destination originator MAC addresses
+ */
+struct batadv_tvlv_mcast_tracker {
+	__be16	num_dests;
+};
 #pragma pack()
 #endif /* _UAPI_LINUX_BATADV_PACKET_H_ */

include/uapi/linux/bpf.h+27−17

 	BPF_LINK_TYPE_TCX = 11,
 	BPF_LINK_TYPE_UPROBE_MULTI = 12,
 	BPF_LINK_TYPE_NETKIT = 13,
-	MAX_BPF_LINK_TYPE,
+	__MAX_BPF_LINK_TYPE,
 };
+#define MAX_BPF_LINK_TYPE __MAX_BPF_LINK_TYPE
 enum bpf_perf_event_type {
 	BPF_PERF_EVENT_UNSPEC = 0,
 	BPF_PERF_EVENT_UPROBE = 1,
  */
 #define BPF_F_XDP_DEV_BOUND_ONLY	(1U << 6)
+/* The verifier internal test flag. Behavior is undefined */
+#define BPF_F_TEST_REG_INVARIANTS	(1U << 7)
 /* link_create.kprobe_multi.flags used in LINK_CREATE command for
  * BPF_TRACE_KPROBE_MULTI attach type to create return probe.
  */
  * long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags)
  *	Description
  *		Return a user or a kernel stack in bpf program provided buffer.
+ *		Note: the user stack will only be populated if the *task* is
+ *		the current task; all other tasks will return -EOPNOTSUPP.
  *		To achieve this, the helper needs *task*, which is a valid
  *		pointer to **struct task_struct**. To store the stacktrace, the
  *		bpf program provides *buf* with a nonnegative *size*.
  *
  *		**BPF_F_USER_STACK**
  *			Collect a user space stack instead of a kernel stack.
+ *			The *task* must be the current task.
  *		**BPF_F_USER_BUILD_ID**
  *			Collect buildid+offset instead of ips for user stack,
  *			only valid if **BPF_F_USER_STACK** is also specified.
 			__u32 flags;
 			__u64 missed;
 		} kprobe_multi;
+		struct {
+			__aligned_u64 path;
+			__aligned_u64 offsets;
+			__aligned_u64 ref_ctr_offsets;
+			__aligned_u64 cookies;
+			__u32 path_size; /* in/out: real path size on success, including zero byte */
+			__u32 count; /* in/out: uprobe_multi offsets/ref_ctr_offsets/cookies count */
+			__u32 flags;
+			__u32 pid;
+		} uprobe_multi;
 		struct {
 			__u32 type; /* enum bpf_perf_event_type */
 			__u32 :32;
 	BPF_TCP_LISTEN,
 	BPF_TCP_CLOSING,	/* Now a valid state */
 	BPF_TCP_NEW_SYN_RECV,
+	BPF_TCP_BOUND_INACTIVE,
 	BPF_TCP_MAX_STATES	/* Leave at the end! */
 };
 };
 struct bpf_timer {
-	__u64 :64;
+	__u64 __opaque[2];
-	__u64 :64;
 } __attribute__((aligned(8)));
 struct bpf_dynptr {
-	__u64 :64;
+	__u64 __opaque[2];
-	__u64 :64;
 } __attribute__((aligned(8)));
 struct bpf_list_head {
-	__u64 :64;
+	__u64 __opaque[2];
-	__u64 :64;
 } __attribute__((aligned(8)));
 struct bpf_list_node {
-	__u64 :64;
+	__u64 __opaque[3];
-	__u64 :64;
-	__u64 :64;
 } __attribute__((aligned(8)));
 struct bpf_rb_root {
-	__u64 :64;
+	__u64 __opaque[2];
-	__u64 :64;
 } __attribute__((aligned(8)));
 struct bpf_rb_node {
-	__u64 :64;
+	__u64 __opaque[4];
-	__u64 :64;
-	__u64 :64;
-	__u64 :64;
 } __attribute__((aligned(8)));
 struct bpf_refcount {
-	__u32 :32;
+	__u32 __opaque[1];
 } __attribute__((aligned(4)));
 struct bpf_sysctl {

include/uapi/linux/bpfilter.h+0−21

@@ -1,21 +0,0 @@
1	/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2	#ifndef _UAPI_LINUX_BPFILTER_H
3	#define _UAPI_LINUX_BPFILTER_H
4
5	#include <linux/if.h>
6
7	enum {
8	BPFILTER_IPT_SO_SET_REPLACE = 64,
9	BPFILTER_IPT_SO_SET_ADD_COUNTERS = 65,
10	BPFILTER_IPT_SET_MAX,
11	};
12
13	enum {
14	BPFILTER_IPT_SO_GET_INFO = 64,
15	BPFILTER_IPT_SO_GET_ENTRIES = 65,
16	BPFILTER_IPT_SO_GET_REVISION_MATCH = 66,
17	BPFILTER_IPT_SO_GET_REVISION_TARGET = 67,
18	BPFILTER_IPT_GET_MAX,
19	};
20
21	#endif /* _UAPI_LINUX_BPFILTER_H */

include/uapi/linux/cxl_mem.h+1−0

@@ -46,6 +46,7 @@ · 45 unmodified lines
46	___C(GET_SCAN_MEDIA_CAPS, "Get Scan Media Capabilities"), \	46	___C(GET_SCAN_MEDIA_CAPS, "Get Scan Media Capabilities"), \
47	___DEPRECATED(SCAN_MEDIA, "Scan Media"), \	47	___DEPRECATED(SCAN_MEDIA, "Scan Media"), \
48	___DEPRECATED(GET_SCAN_MEDIA, "Get Scan Media Results"), \	48	___DEPRECATED(GET_SCAN_MEDIA, "Get Scan Media Results"), \
		49	___C(GET_TIMESTAMP, "Get Timestamp"), \
49	___C(MAX, "invalid / last command")	50	___C(MAX, "invalid / last command")
50		51
51	#define ___C(a, b) CXL_MEM_COMMAND_ID_##a	52	#define ___C(a, b) CXL_MEM_COMMAND_ID_##a

include/uapi/linux/devlink.h+2−0

@@ -139,6 +139,8 @@ enum devlink_command { · 138 unmodified lines
139	DEVLINK_CMD_SELFTESTS_GET, /* can dump */	139	DEVLINK_CMD_SELFTESTS_GET, /* can dump */
140	DEVLINK_CMD_SELFTESTS_RUN,	140	DEVLINK_CMD_SELFTESTS_RUN,
141		141
		142	DEVLINK_CMD_NOTIFY_FILTER_SET,
		143
142	/* add new commands above here */	144	/* add new commands above here */
143	__DEVLINK_CMD_MAX,	145	__DEVLINK_CMD_MAX,
144	DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1	146	DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1

include/uapi/linux/dpll.h+1−0

@@ -179,6 +179,7 @@ enum dpll_a_pin { · 178 unmodified lines
179	DPLL_A_PIN_PHASE_ADJUST_MAX,	179	DPLL_A_PIN_PHASE_ADJUST_MAX,
180	DPLL_A_PIN_PHASE_ADJUST,	180	DPLL_A_PIN_PHASE_ADJUST,
181	DPLL_A_PIN_PHASE_OFFSET,	181	DPLL_A_PIN_PHASE_OFFSET,
		182	DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET,
182		183
183	__DPLL_A_PIN_MAX,	184	__DPLL_A_PIN_MAX,
184	DPLL_A_PIN_MAX = (__DPLL_A_PIN_MAX - 1)	185	DPLL_A_PIN_MAX = (__DPLL_A_PIN_MAX - 1)

include/uapi/linux/ethtool.h+28−13

  *	hardware hash key.
  * @hfunc: Defines the current RSS hash function used by HW (or to be set to).
  *	Valid values are one of the %ETH_RSS_HASH_*.
+ * @input_xfrm: Defines how the input data is transformed. Valid values are one
+ *	of %RXH_XFRM_*.
  * @rsvd8: Reserved for future use; see the note on reserved space.
  * @rsvd32: Reserved for future use; see the note on reserved space.
  * @rss_config: RX ring/queue index for each hash value i.e., indirection table
 	__u32   indir_size;
 	__u32   key_size;
 	__u8	hfunc;
-	__u8	rsvd8[3];
+	__u8	input_xfrm;
+	__u8	rsvd8[2];
 	__u32	rsvd32;
 	__u32   rss_config[];
 };
 #define WOL_MODE_COUNT		8
+/* RSS hash function data
+ * XOR the corresponding source and destination fields of each specified
+ * protocol. Both copies of the XOR'ed fields are fed into the RSS and RXHASH
+ * calculation. Note that this XORing reduces the input set entropy and could
+ * be exploited to reduce the RSS queue spread.
+ */
+#define	RXH_XFRM_SYM_XOR	(1 << 0)
+#define	RXH_XFRM_NO_CHANGE	0xff
 /* L2-L4 network traffic flow types */
 #define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
 #define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
  *	refused. For drivers: ignore this field (use kernel's
  *	__ETHTOOL_LINK_MODE_MASK_NBITS instead), any change to it will
  *	be overwritten by kernel.
- * @supported: Bitmap with each bit meaning given by
- *	%ethtool_link_mode_bit_indices for the link modes, physical
- *	connectors and other link features for which the interface
- *	supports autonegotiation or auto-detection.  Read-only.
- * @advertising: Bitmap with each bit meaning given by
- *	%ethtool_link_mode_bit_indices for the link modes, physical
- *	connectors and other link features that are advertised through
- *	autonegotiation or enabled for auto-detection.
- * @lp_advertising: Bitmap with each bit meaning given by
- *	%ethtool_link_mode_bit_indices for the link modes, and other
- *	link features that the link partner advertised through
- *	autonegotiation; 0 if unknown or not applicable.  Read-only.
  * @transceiver: Used to distinguish different possible PHY types,
  *	reported consistently by PHYLIB.  Read-only.
  * @master_slave_cfg: Master/slave port mode.
  * %set_link_ksettings() should validate all fields other than @cmd
  * and @link_mode_masks_nwords that are not described as read-only or
  * deprecated, and must ignore all fields described as read-only.
+ *
+ * @link_mode_masks is divided into three bitfields, each of length
+ * @link_mode_masks_nwords:
+ * - supported: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, physical
+ *	connectors and other link features for which the interface
+ *	supports autonegotiation or auto-detection.  Read-only.
+ * - advertising: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, physical
+ *	connectors and other link features that are advertised through
+ *	autonegotiation or enabled for auto-detection.
+ * - lp_advertising: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, and other
+ *	link features that the link partner advertised through
+ *	autonegotiation; 0 if unknown or not applicable.  Read-only.
  */
 struct ethtool_link_settings {
 	__u32	cmd;

include/uapi/linux/ethtool_netlink.h+1−0

@@ -908,6 +908,7 @@ enum { · 907 unmodified lines
908	ETHTOOL_A_RSS_HFUNC, /* u32 */	908	ETHTOOL_A_RSS_HFUNC, /* u32 */
909	ETHTOOL_A_RSS_INDIR, /* binary */	909	ETHTOOL_A_RSS_INDIR, /* binary */
910	ETHTOOL_A_RSS_HKEY, /* binary */	910	ETHTOOL_A_RSS_HKEY, /* binary */
		911	ETHTOOL_A_RSS_INPUT_XFRM, /* u32 */
911		912
912	__ETHTOOL_A_RSS_CNT,	913	__ETHTOOL_A_RSS_CNT,
913	ETHTOOL_A_RSS_MAX = (__ETHTOOL_A_RSS_CNT - 1),	914	ETHTOOL_A_RSS_MAX = (__ETHTOOL_A_RSS_CNT - 1),

include/uapi/linux/fs.h+1−0

@@ -316,6 +316,7 @@ typedef int __bitwise __kernel_rwf_t; · 315 unmodified lines
316	#define PAGE_IS_SWAPPED (1 << 4)	316	#define PAGE_IS_SWAPPED (1 << 4)
317	#define PAGE_IS_PFNZERO (1 << 5)	317	#define PAGE_IS_PFNZERO (1 << 5)
318	#define PAGE_IS_HUGE (1 << 6)	318	#define PAGE_IS_HUGE (1 << 6)
		319	#define PAGE_IS_SOFT_DIRTY (1 << 7)
319		320
320	/*	321	/*
321	* struct page_region - Page region with flags	322	* struct page_region - Page region with flags

include/uapi/linux/fuse.h+6−4

  *  - add FUSE_HAS_EXPIRE_ONLY
  *
  *  7.39
- *  - add FUSE_DIRECT_IO_RELAX
+ *  - add FUSE_DIRECT_IO_ALLOW_MMAP
  *  - add FUSE_STATX and related structures
  */
  * FUSE_CREATE_SUPP_GROUP: add supplementary group info to create, mkdir,
  *			symlink and mknod (single group that matches parent)
  * FUSE_HAS_EXPIRE_ONLY: kernel supports expiry-only entry invalidation
- * FUSE_DIRECT_IO_RELAX: relax restrictions in FOPEN_DIRECT_IO mode, for now
+ * FUSE_DIRECT_IO_ALLOW_MMAP: allow shared mmap in FOPEN_DIRECT_IO mode.
- *                       allow shared mmap
  */
 #define FUSE_ASYNC_READ		(1 << 0)
 #define FUSE_POSIX_LOCKS	(1 << 1)
 #define FUSE_HAS_INODE_DAX	(1ULL << 33)
 #define FUSE_CREATE_SUPP_GROUP	(1ULL << 34)
 #define FUSE_HAS_EXPIRE_ONLY	(1ULL << 35)
-#define FUSE_DIRECT_IO_RELAX	(1ULL << 36)
+#define FUSE_DIRECT_IO_ALLOW_MMAP (1ULL << 36)
+/* Obsolete alias for FUSE_DIRECT_IO_ALLOW_MMAP */
+#define FUSE_DIRECT_IO_RELAX	FUSE_DIRECT_IO_ALLOW_MMAP
 /**
  * CUSE INIT request/reply flags

include/uapi/linux/if_bridge.h+1−0

@@ -757,6 +757,7 @@ enum { · 756 unmodified lines
757	MDBE_ATTR_VNI,	757	MDBE_ATTR_VNI,
758	MDBE_ATTR_IFINDEX,	758	MDBE_ATTR_IFINDEX,
759	MDBE_ATTR_SRC_VNI,	759	MDBE_ATTR_SRC_VNI,
		760	MDBE_ATTR_STATE_MASK,
760	__MDBE_ATTR_MAX,	761	__MDBE_ATTR_MAX,
761	};	762	};
762	#define MDBE_ATTR_MAX (__MDBE_ATTR_MAX - 1)	763	#define MDBE_ATTR_MAX (__MDBE_ATTR_MAX - 1)

include/uapi/linux/if_link.h+529−0

@@ -461,6 +461,286 @@ enum in6_addr_gen_mode { · 460 unmodified lines
461		461
462	/* Bridge section */	462	/* Bridge section */
463		463
		464	/**
		465	* DOC: Bridge enum definition
		466	*
		467	* Please note that the timer values in the following section are expected
		468	* in clock_t format, which is seconds multiplied by USER_HZ (generally
		469	* defined as 100).
		470	*
		471	* @IFLA_BR_FORWARD_DELAY
		472	* The bridge forwarding delay is the time spent in LISTENING state
		473	* (before moving to LEARNING) and in LEARNING state (before moving
		474	* to FORWARDING). Only relevant if STP is enabled.
		475	*
		476	* The valid values are between (2 * USER_HZ) and (30 * USER_HZ).
		477	* The default value is (15 * USER_HZ).
		478	*
		479	* @IFLA_BR_HELLO_TIME
		480	* The time between hello packets sent by the bridge, when it is a root
		481	* bridge or a designated bridge. Only relevant if STP is enabled.
		482	*
		483	* The valid values are between (1 * USER_HZ) and (10 * USER_HZ).
		484	* The default value is (2 * USER_HZ).
		485	*
		486	* @IFLA_BR_MAX_AGE
		487	* The hello packet timeout is the time until another bridge in the
		488	* spanning tree is assumed to be dead, after reception of its last hello
		489	* message. Only relevant if STP is enabled.
		490	*
		491	* The valid values are between (6 * USER_HZ) and (40 * USER_HZ).
		492	* The default value is (20 * USER_HZ).
		493	*
		494	* @IFLA_BR_AGEING_TIME
		495	* Configure the bridge's FDB entries aging time. It is the time a MAC
		496	* address will be kept in the FDB after a packet has been received from
		497	* that address. After this time has passed, entries are cleaned up.
		498	* Allow values outside the 802.1 standard specification for special cases:
		499	*
		500	* * 0 - entry never ages (all permanent)
		501	* * 1 - entry disappears (no persistence)
		502	*
		503	* The default value is (300 * USER_HZ).
		504	*
		505	* @IFLA_BR_STP_STATE
		506	* Turn spanning tree protocol on (IFLA_BR_STP_STATE > 0) or off
		507	* (IFLA_BR_STP_STATE == 0) for this bridge.
		508	*
		509	* The default value is 0 (disabled).
		510	*
		511	* @IFLA_BR_PRIORITY
		512	* Set this bridge's spanning tree priority, used during STP root bridge
		513	* election.
		514	*
		515	* The valid values are between 0 and 65535.
		516	*
		517	* @IFLA_BR_VLAN_FILTERING
		518	* Turn VLAN filtering on (IFLA_BR_VLAN_FILTERING > 0) or off
		519	* (IFLA_BR_VLAN_FILTERING == 0). When disabled, the bridge will not
		520	* consider the VLAN tag when handling packets.
		521	*
		522	* The default value is 0 (disabled).
		523	*
		524	* @IFLA_BR_VLAN_PROTOCOL
		525	* Set the protocol used for VLAN filtering.
		526	*
		527	* The valid values are 0x8100(802.1Q) or 0x88A8(802.1AD). The default value
		528	* is 0x8100(802.1Q).
		529	*
		530	* @IFLA_BR_GROUP_FWD_MASK
		531	* The group forwarding mask. This is the bitmask that is applied to
		532	* decide whether to forward incoming frames destined to link-local
		533	* addresses (of the form 01:80:C2:00:00:0X).
		534	*
		535	* The default value is 0, which means the bridge does not forward any
		536	* link-local frames coming on this port.
		537	*
		538	* @IFLA_BR_ROOT_ID
		539	* The bridge root id, read only.
		540	*
		541	* @IFLA_BR_BRIDGE_ID
		542	* The bridge id, read only.
		543	*
		544	* @IFLA_BR_ROOT_PORT
		545	* The bridge root port, read only.
		546	*
		547	* @IFLA_BR_ROOT_PATH_COST
		548	* The bridge root path cost, read only.
		549	*
		550	* @IFLA_BR_TOPOLOGY_CHANGE
		551	* The bridge topology change, read only.
		552	*
		553	* @IFLA_BR_TOPOLOGY_CHANGE_DETECTED
		554	* The bridge topology change detected, read only.
		555	*
		556	* @IFLA_BR_HELLO_TIMER
		557	* The bridge hello timer, read only.
		558	*
		559	* @IFLA_BR_TCN_TIMER
		560	* The bridge tcn timer, read only.
		561	*
		562	* @IFLA_BR_TOPOLOGY_CHANGE_TIMER
		563	* The bridge topology change timer, read only.
		564	*
		565	* @IFLA_BR_GC_TIMER
		566	* The bridge gc timer, read only.
		567	*
		568	* @IFLA_BR_GROUP_ADDR
		569	* Set the MAC address of the multicast group this bridge uses for STP.
		570	* The address must be a link-local address in standard Ethernet MAC address
		571	* format. It is an address of the form 01:80:C2:00:00:0X, with X in [0, 4..f].
		572	*
		573	* The default value is 0.
		574	*
		575	* @IFLA_BR_FDB_FLUSH
		576	* Flush bridge's fdb dynamic entries.
		577	*
		578	* @IFLA_BR_MCAST_ROUTER
		579	* Set bridge's multicast router if IGMP snooping is enabled.
		580	* The valid values are:
		581	*
		582	* * 0 - disabled.
		583	* * 1 - automatic (queried).
		584	* * 2 - permanently enabled.
		585	*
		586	* The default value is 1.
		587	*
		588	* @IFLA_BR_MCAST_SNOOPING
		589	* Turn multicast snooping on (IFLA_BR_MCAST_SNOOPING > 0) or off
		590	* (IFLA_BR_MCAST_SNOOPING == 0).
		591	*
		592	* The default value is 1.
		593	*
		594	* @IFLA_BR_MCAST_QUERY_USE_IFADDR
		595	* If enabled use the bridge's own IP address as source address for IGMP
		596	* queries (IFLA_BR_MCAST_QUERY_USE_IFADDR > 0) or the default of 0.0.0.0
		597	* (IFLA_BR_MCAST_QUERY_USE_IFADDR == 0).
		598	*
		599	* The default value is 0 (disabled).
		600	*
		601	* @IFLA_BR_MCAST_QUERIER
		602	* Enable (IFLA_BR_MULTICAST_QUERIER > 0) or disable
		603	* (IFLA_BR_MULTICAST_QUERIER == 0) IGMP querier, ie sending of multicast
		604	* queries by the bridge.
		605	*
		606	* The default value is 0 (disabled).
		607	*
		608	* @IFLA_BR_MCAST_HASH_ELASTICITY
		609	* Set multicast database hash elasticity, It is the maximum chain length in
		610	* the multicast hash table. This attribute is deprecated and the value
		611	* is always 16.
		612	*
		613	* @IFLA_BR_MCAST_HASH_MAX
		614	* Set maximum size of the multicast hash table
		615	*
		616	* The default value is 4096, the value must be a power of 2.
		617	*
		618	* @IFLA_BR_MCAST_LAST_MEMBER_CNT
		619	* The Last Member Query Count is the number of Group-Specific Queries
		620	* sent before the router assumes there are no local members. The Last
		621	* Member Query Count is also the number of Group-and-Source-Specific
		622	* Queries sent before the router assumes there are no listeners for a
		623	* particular source.
		624	*
		625	* The default value is 2.
		626	*
		627	* @IFLA_BR_MCAST_STARTUP_QUERY_CNT
		628	* The Startup Query Count is the number of Queries sent out on startup,
		629	* separated by the Startup Query Interval.
		630	*
		631	* The default value is 2.
		632	*
		633	* @IFLA_BR_MCAST_LAST_MEMBER_INTVL
		634	* The Last Member Query Interval is the Max Response Time inserted into
		635	* Group-Specific Queries sent in response to Leave Group messages, and
		636	* is also the amount of time between Group-Specific Query messages.
		637	*
		638	* The default value is (1 * USER_HZ).
		639	*
		640	* @IFLA_BR_MCAST_MEMBERSHIP_INTVL
		641	* The interval after which the bridge will leave a group, if no membership
		642	* reports for this group are received.
		643	*
		644	* The default value is (260 * USER_HZ).
		645	*
		646	* @IFLA_BR_MCAST_QUERIER_INTVL
		647	* The interval between queries sent by other routers. if no queries are
		648	* seen after this delay has passed, the bridge will start to send its own
		649	* queries (as if IFLA_BR_MCAST_QUERIER_INTVL was enabled).
		650	*
		651	* The default value is (255 * USER_HZ).
		652	*
		653	* @IFLA_BR_MCAST_QUERY_INTVL
		654	* The Query Interval is the interval between General Queries sent by
		655	* the Querier.
		656	*
		657	* The default value is (125 * USER_HZ). The minimum value is (1 * USER_HZ).
		658	*
		659	* @IFLA_BR_MCAST_QUERY_RESPONSE_INTVL
		660	* The Max Response Time used to calculate the Max Resp Code inserted
		661	* into the periodic General Queries.
		662	*
		663	* The default value is (10 * USER_HZ).
		664	*
		665	* @IFLA_BR_MCAST_STARTUP_QUERY_INTVL
		666	* The interval between queries in the startup phase.
		667	*
		668	* The default value is (125 * USER_HZ) / 4. The minimum value is (1 * USER_HZ).
		669	*
		670	* @IFLA_BR_NF_CALL_IPTABLES
		671	* Enable (NF_CALL_IPTABLES > 0) or disable (NF_CALL_IPTABLES == 0)
		672	* iptables hooks on the bridge.
		673	*
		674	* The default value is 0 (disabled).
		675	*
		676	* @IFLA_BR_NF_CALL_IP6TABLES
		677	* Enable (NF_CALL_IP6TABLES > 0) or disable (NF_CALL_IP6TABLES == 0)
		678	* ip6tables hooks on the bridge.
		679	*
		680	* The default value is 0 (disabled).
		681	*
		682	* @IFLA_BR_NF_CALL_ARPTABLES
		683	* Enable (NF_CALL_ARPTABLES > 0) or disable (NF_CALL_ARPTABLES == 0)
		684	* arptables hooks on the bridge.
		685	*
		686	* The default value is 0 (disabled).
		687	*
		688	* @IFLA_BR_VLAN_DEFAULT_PVID
		689	* VLAN ID applied to untagged and priority-tagged incoming packets.
		690	*
		691	* The default value is 1. Setting to the special value 0 makes all ports of
		692	* this bridge not have a PVID by default, which means that they will
		693	* not accept VLAN-untagged traffic.
		694	*
		695	* @IFLA_BR_PAD
		696	* Bridge attribute padding type for netlink message.
		697	*
		698	* @IFLA_BR_VLAN_STATS_ENABLED
		699	* Enable (IFLA_BR_VLAN_STATS_ENABLED == 1) or disable
		700	* (IFLA_BR_VLAN_STATS_ENABLED == 0) per-VLAN stats accounting.
		701	*
		702	* The default value is 0 (disabled).
		703	*
		704	* @IFLA_BR_MCAST_STATS_ENABLED
		705	* Enable (IFLA_BR_MCAST_STATS_ENABLED > 0) or disable
		706	* (IFLA_BR_MCAST_STATS_ENABLED == 0) multicast (IGMP/MLD) stats
		707	* accounting.
		708	*
		709	* The default value is 0 (disabled).
		710	*
		711	* @IFLA_BR_MCAST_IGMP_VERSION
		712	* Set the IGMP version.
		713	*
		714	* The valid values are 2 and 3. The default value is 2.
		715	*
		716	* @IFLA_BR_MCAST_MLD_VERSION
		717	* Set the MLD version.
		718	*
		719	* The valid values are 1 and 2. The default value is 1.
		720	*
		721	* @IFLA_BR_VLAN_STATS_PER_PORT
		722	* Enable (IFLA_BR_VLAN_STATS_PER_PORT == 1) or disable
		723	* (IFLA_BR_VLAN_STATS_PER_PORT == 0) per-VLAN per-port stats accounting.
		724	* Can be changed only when there are no port VLANs configured.
		725	*
		726	* The default value is 0 (disabled).
		727	*
		728	* @IFLA_BR_MULTI_BOOLOPT
		729	* The multi_boolopt is used to control new boolean options to avoid adding
		730	* new netlink attributes. You can look at ``enum br_boolopt_id`` for those
		731	* options.
		732	*
		733	* @IFLA_BR_MCAST_QUERIER_STATE
		734	* Bridge mcast querier states, read only.
		735	*
		736	* @IFLA_BR_FDB_N_LEARNED
		737	* The number of dynamically learned FDB entries for the current bridge,
		738	* read only.
		739	*
		740	* @IFLA_BR_FDB_MAX_LEARNED
		741	* Set the number of max dynamically learned FDB entries for the current
		742	* bridge.
		743	*/
464	enum {	744	enum {
465	IFLA_BR_UNSPEC,	745	IFLA_BR_UNSPEC,
466	IFLA_BR_FORWARD_DELAY,	746	IFLA_BR_FORWARD_DELAY,
@@ -522,11 +802,252 @@ struct ifla_bridge_id { · 55 unmodified lines
522	__u8 addr[6]; /* ETH_ALEN */	802	__u8 addr[6]; /* ETH_ALEN */
523	};	803	};
524		804
		805	/**
		806	* DOC: Bridge mode enum definition
		807	*
		808	* @BRIDGE_MODE_HAIRPIN
		809	* Controls whether traffic may be sent back out of the port on which it
		810	* was received. This option is also called reflective relay mode, and is
		811	* used to support basic VEPA (Virtual Ethernet Port Aggregator)
		812	* capabilities. By default, this flag is turned off and the bridge will
		813	* not forward traffic back out of the receiving port.
		814	*/
525	enum {	815	enum {
526	BRIDGE_MODE_UNSPEC,	816	BRIDGE_MODE_UNSPEC,
527	BRIDGE_MODE_HAIRPIN,	817	BRIDGE_MODE_HAIRPIN,
528	};	818	};
529		819
		820	/**
		821	* DOC: Bridge port enum definition
		822	*
		823	* @IFLA_BRPORT_STATE
		824	* The operation state of the port. Here are the valid values.
		825	*
		826	* * 0 - port is in STP DISABLED state. Make this port completely
		827	* inactive for STP. This is also called BPDU filter and could be used
		828	* to disable STP on an untrusted port, like a leaf virtual device.
		829	* The traffic forwarding is also stopped on this port.
		830	* * 1 - port is in STP LISTENING state. Only valid if STP is enabled
		831	* on the bridge. In this state the port listens for STP BPDUs and
		832	* drops all other traffic frames.
		833	* * 2 - port is in STP LEARNING state. Only valid if STP is enabled on
		834	* the bridge. In this state the port will accept traffic only for the
		835	* purpose of updating MAC address tables.
		836	* * 3 - port is in STP FORWARDING state. Port is fully active.
		837	* * 4 - port is in STP BLOCKING state. Only valid if STP is enabled on
		838	* the bridge. This state is used during the STP election process.
		839	* In this state, port will only process STP BPDUs.
		840	*
		841	* @IFLA_BRPORT_PRIORITY
		842	* The STP port priority. The valid values are between 0 and 255.
		843	*
		844	* @IFLA_BRPORT_COST
		845	* The STP path cost of the port. The valid values are between 1 and 65535.
		846	*
		847	* @IFLA_BRPORT_MODE
		848	* Set the bridge port mode. See BRIDGE_MODE_HAIRPIN for more details.
		849	*
		850	* @IFLA_BRPORT_GUARD
		851	* Controls whether STP BPDUs will be processed by the bridge port. By
		852	* default, the flag is turned off to allow BPDU processing. Turning this
		853	* flag on will disable the bridge port if a STP BPDU packet is received.
		854	*
		855	* If the bridge has Spanning Tree enabled, hostile devices on the network
		856	* may send BPDU on a port and cause network failure. Setting guard on
		857	* will detect and stop this by disabling the port. The port will be
		858	* restarted if the link is brought down, or removed and reattached.
		859	*
		860	* @IFLA_BRPORT_PROTECT
		861	* Controls whether a given port is allowed to become a root port or not.
		862	* Only used when STP is enabled on the bridge. By default the flag is off.
		863	*
		864	* This feature is also called root port guard. If BPDU is received from a
		865	* leaf (edge) port, it should not be elected as root port. This could
		866	* be used if using STP on a bridge and the downstream bridges are not fully
		867	* trusted; this prevents a hostile guest from rerouting traffic.
		868	*
		869	* @IFLA_BRPORT_FAST_LEAVE
		870	* This flag allows the bridge to immediately stop multicast traffic
		871	* forwarding on a port that receives an IGMP Leave message. It is only used
		872	* when IGMP snooping is enabled on the bridge. By default the flag is off.
		873	*
		874	* @IFLA_BRPORT_LEARNING
		875	* Controls whether a given port will learn source MAC addresses from
		876	* received traffic or not. Also controls whether dynamic FDB entries
		877	* (which can also be added by software) will be refreshed by incoming
		878	* traffic. By default this flag is on.
		879	*
		880	* @IFLA_BRPORT_UNICAST_FLOOD
		881	* Controls whether unicast traffic for which there is no FDB entry will
		882	* be flooded towards this port. By default this flag is on.
		883	*
		884	* @IFLA_BRPORT_PROXYARP
		885	* Enable proxy ARP on this port.
		886	*
		887	* @IFLA_BRPORT_LEARNING_SYNC
		888	* Controls whether a given port will sync MAC addresses learned on device
		889	* port to bridge FDB.
		890	*
		891	* @IFLA_BRPORT_PROXYARP_WIFI
		892	* Enable proxy ARP on this port which meets extended requirements by
		893	* IEEE 802.11 and Hotspot 2.0 specifications.
		894	*
		895	* @IFLA_BRPORT_ROOT_ID
		896	*
		897	* @IFLA_BRPORT_BRIDGE_ID
		898	*
		899	* @IFLA_BRPORT_DESIGNATED_PORT
		900	*
		901	* @IFLA_BRPORT_DESIGNATED_COST
		902	*
		903	* @IFLA_BRPORT_ID
		904	*
		905	* @IFLA_BRPORT_NO
		906	*
		907	* @IFLA_BRPORT_TOPOLOGY_CHANGE_ACK
		908	*
		909	* @IFLA_BRPORT_CONFIG_PENDING
		910	*
		911	* @IFLA_BRPORT_MESSAGE_AGE_TIMER
		912	*
		913	* @IFLA_BRPORT_FORWARD_DELAY_TIMER
		914	*
		915	* @IFLA_BRPORT_HOLD_TIMER
		916	*
		917	* @IFLA_BRPORT_FLUSH
		918	* Flush bridge ports' fdb dynamic entries.
		919	*
		920	* @IFLA_BRPORT_MULTICAST_ROUTER
		921	* Configure the port's multicast router presence. A port with
		922	* a multicast router will receive all multicast traffic.
		923	* The valid values are:
		924	*
		925	* * 0 disable multicast routers on this port
		926	* * 1 let the system detect the presence of routers (default)
		927	* * 2 permanently enable multicast traffic forwarding on this port
		928	* * 3 enable multicast routers temporarily on this port, not depending
		929	* on incoming queries.
		930	*
		931	* @IFLA_BRPORT_PAD
		932	*
		933	* @IFLA_BRPORT_MCAST_FLOOD
		934	* Controls whether a given port will flood multicast traffic for which
		935	* there is no MDB entry. By default this flag is on.
		936	*
		937	* @IFLA_BRPORT_MCAST_TO_UCAST
		938	* Controls whether a given port will replicate packets using unicast
		939	* instead of multicast. By default this flag is off.
		940	*
		941	* This is done by copying the packet per host and changing the multicast
		942	* destination MAC to a unicast one accordingly.
		943	*
		944	* mcast_to_unicast works on top of the multicast snooping feature of the
		945	* bridge. Which means unicast copies are only delivered to hosts which
		946	* are interested in unicast and signaled this via IGMP/MLD reports previously.
		947	*
		948	* This feature is intended for interface types which have a more reliable
		949	* and/or efficient way to deliver unicast packets than broadcast ones
		950	* (e.g. WiFi).
		951	*
		952	* However, it should only be enabled on interfaces where no IGMPv2/MLDv1
		953	* report suppression takes place. IGMP/MLD report suppression issue is
		954	* usually overcome by the network daemon (supplicant) enabling AP isolation
		955	* and by that separating all STAs.
		956	*
		957	* Delivery of STA-to-STA IP multicast is made possible again by enabling
		958	* and utilizing the bridge hairpin mode, which considers the incoming port
		959	* as a potential outgoing port, too (see BRIDGE_MODE_HAIRPIN option).
		960	* Hairpin mode is performed after multicast snooping, therefore leading
		961	* to only deliver reports to STAs running a multicast router.
		962	*
		963	* @IFLA_BRPORT_VLAN_TUNNEL
		964	* Controls whether vlan to tunnel mapping is enabled on the port.
		965	* By default this flag is off.
		966	*
		967	* @IFLA_BRPORT_BCAST_FLOOD
		968	* Controls flooding of broadcast traffic on the given port. By default
		969	* this flag is on.
		970	*
		971	* @IFLA_BRPORT_GROUP_FWD_MASK
		972	* Set the group forward mask. This is a bitmask that is applied to
		973	* decide whether to forward incoming frames destined to link-local
		974	* addresses. The addresses of the form are 01:80:C2:00:00:0X (defaults
		975	* to 0, which means the bridge does not forward any link-local frames
		976	* coming on this port).
		977	*
		978	* @IFLA_BRPORT_NEIGH_SUPPRESS
		979	* Controls whether neighbor discovery (arp and nd) proxy and suppression
		980	* is enabled on the port. By default this flag is off.
		981	*
		982	* @IFLA_BRPORT_ISOLATED
		983	* Controls whether a given port will be isolated, which means it will be
		984	* able to communicate with non-isolated ports only. By default this
		985	* flag is off.
		986	*
		987	* @IFLA_BRPORT_BACKUP_PORT
		988	* Set a backup port. If the port loses carrier all traffic will be
		989	* redirected to the configured backup port. Set the value to 0 to disable
		990	* it.
		991	*
		992	* @IFLA_BRPORT_MRP_RING_OPEN
		993	*
		994	* @IFLA_BRPORT_MRP_IN_OPEN
		995	*
		996	* @IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT
		997	* The number of per-port EHT hosts limit. The default value is 512.
		998	* Setting to 0 is not allowed.
		999	*
		1000	* @IFLA_BRPORT_MCAST_EHT_HOSTS_CNT
		1001	* The current number of tracked hosts, read only.
		1002	*
		1003	* @IFLA_BRPORT_LOCKED
		1004	* Controls whether a port will be locked, meaning that hosts behind the
		1005	* port will not be able to communicate through the port unless an FDB
		1006	* entry with the unit's MAC address is in the FDB. The common use case is
		1007	* that hosts are allowed access through authentication with the IEEE 802.1X
		1008	* protocol or based on whitelists. By default this flag is off.
		1009	*
		1010	* Please note that secure 802.1X deployments should always use the
		1011	* BR_BOOLOPT_NO_LL_LEARN flag, to not permit the bridge to populate its
		1012	* FDB based on link-local (EAPOL) traffic received on the port.
		1013	*
		1014	* @IFLA_BRPORT_MAB
		1015	* Controls whether a port will use MAC Authentication Bypass (MAB), a
		1016	* technique through which select MAC addresses may be allowed on a locked
		1017	* port, without using 802.1X authentication. Packets with an unknown source
		1018	* MAC address generates a "locked" FDB entry on the incoming bridge port.
		1019	* The common use case is for user space to react to these bridge FDB
		1020	* notifications and optionally replace the locked FDB entry with a normal
		1021	* one, allowing traffic to pass for whitelisted MAC addresses.
		1022	*
		1023	* Setting this flag also requires IFLA_BRPORT_LOCKED and
		1024	* IFLA_BRPORT_LEARNING. IFLA_BRPORT_LOCKED ensures that unauthorized
		1025	* data packets are dropped, and IFLA_BRPORT_LEARNING allows the dynamic
		1026	* FDB entries installed by user space (as replacements for the locked FDB
		1027	* entries) to be refreshed and/or aged out.
		1028	*
		1029	* @IFLA_BRPORT_MCAST_N_GROUPS
		1030	*
		1031	* @IFLA_BRPORT_MCAST_MAX_GROUPS
		1032	* Sets the maximum number of MDB entries that can be registered for a
		1033	* given port. Attempts to register more MDB entries at the port than this
		1034	* limit allows will be rejected, whether they are done through netlink
		1035	* (e.g. the bridge tool), or IGMP or MLD membership reports. Setting a
		1036	* limit of 0 disables the limit. The default value is 0.
		1037	*
		1038	* @IFLA_BRPORT_NEIGH_VLAN_SUPPRESS
		1039	* Controls whether neighbor discovery (arp and nd) proxy and suppression is
		1040	* enabled for a given port. By default this flag is off.
		1041	*
		1042	* Note that this option only takes effect when IFLA_BRPORT_NEIGH_SUPPRESS
		1043	* is enabled for a given port.
		1044	*
		1045	* @IFLA_BRPORT_BACKUP_NHID
		1046	* The FDB nexthop object ID to attach to packets being redirected to a
		1047	* backup port that has VLAN tunnel mapping enabled (via the
		1048	* IFLA_BRPORT_VLAN_TUNNEL option). Setting a value of 0 (default) has
		1049	* the effect of not attaching any ID.
		1050	*/
530	enum {	1051	enum {
531	IFLA_BRPORT_UNSPEC,	1052	IFLA_BRPORT_UNSPEC,
532	IFLA_BRPORT_STATE, /* Spanning tree state */	1053	IFLA_BRPORT_STATE, /* Spanning tree state */
@@ -856,6 +1377,7 @@ enum { · 323 unmodified lines
856	IFLA_VXLAN_DF,	1377	IFLA_VXLAN_DF,
857	IFLA_VXLAN_VNIFILTER, /* only applicable with COLLECT_METADATA mode */	1378	IFLA_VXLAN_VNIFILTER, /* only applicable with COLLECT_METADATA mode */
858	IFLA_VXLAN_LOCALBYPASS,	1379	IFLA_VXLAN_LOCALBYPASS,
		1380	IFLA_VXLAN_LABEL_POLICY, /* IPv6 flow label policy; ifla_vxlan_label_policy */
859	__IFLA_VXLAN_MAX	1381	__IFLA_VXLAN_MAX
860	};	1382	};
861	#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1)	1383	#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1)
@@ -873,6 +1395,13 @@ enum ifla_vxlan_df { · 11 unmodified lines
873	VXLAN_DF_MAX = __VXLAN_DF_END - 1,	1395	VXLAN_DF_MAX = __VXLAN_DF_END - 1,
874	};	1396	};
875		1397
		1398	enum ifla_vxlan_label_policy {
		1399	VXLAN_LABEL_FIXED = 0,
		1400	VXLAN_LABEL_INHERIT = 1,
		1401	__VXLAN_LABEL_END,
		1402	VXLAN_LABEL_MAX = __VXLAN_LABEL_END - 1,
		1403	};
		1404
876	/* GENEVE section */	1405	/* GENEVE section */
877	enum {	1406	enum {
878	IFLA_GENEVE_UNSPEC,	1407	IFLA_GENEVE_UNSPEC,

include/uapi/linux/if_xdp.h+46−1

@@ -33,7 +33,13 @@ · 32 unmodified lines
33	#define XDP_USE_SG (1 << 4)	33	#define XDP_USE_SG (1 << 4)
34		34
35	/* Flags for xsk_umem_config flags */	35	/* Flags for xsk_umem_config flags */
36	#define XDP_UMEM_UNALIGNED_CHUNK_FLAG (1 << 0)	36	#define XDP_UMEM_UNALIGNED_CHUNK_FLAG (1 << 0)
		37
		38	/* Force checksum calculation in software. Can be used for testing or
		39	* working around potential HW issues. This option causes performance
		40	* degradation and only works in XDP_COPY mode.
		41	*/
		42	#define XDP_UMEM_TX_SW_CSUM (1 << 1)
37		43
38	struct sockaddr_xdp {	44	struct sockaddr_xdp {
39	__u16 sxdp_family;	45	__u16 sxdp_family;
@@ -76,6 +82,7 @@ struct xdp_umem_reg { · 36 unmodified lines
76	__u32 chunk_size;	82	__u32 chunk_size;
77	__u32 headroom;	83	__u32 headroom;
78	__u32 flags;	84	__u32 flags;
		85	__u32 tx_metadata_len;
79	};	86	};
80		87
81	struct xdp_statistics {	88	struct xdp_statistics {
@@ -105,6 +112,41 @@ struct xdp_options { · 23 unmodified lines
105	#define XSK_UNALIGNED_BUF_ADDR_MASK \	112	#define XSK_UNALIGNED_BUF_ADDR_MASK \
106	((1ULL << XSK_UNALIGNED_BUF_OFFSET_SHIFT) - 1)	113	((1ULL << XSK_UNALIGNED_BUF_OFFSET_SHIFT) - 1)
107		114
		115	/* Request transmit timestamp. Upon completion, put it into tx_timestamp
		116	* field of struct xsk_tx_metadata.
		117	*/
		118	#define XDP_TXMD_FLAGS_TIMESTAMP (1 << 0)
		119
		120	/* Request transmit checksum offload. Checksum start position and offset
		121	* are communicated via csum_start and csum_offset fields of struct
		122	* xsk_tx_metadata.
		123	*/
		124	#define XDP_TXMD_FLAGS_CHECKSUM (1 << 1)
		125
		126	/* AF_XDP offloads request. 'request' union member is consumed by the driver
		127	* when the packet is being transmitted. 'completion' union member is
		128	* filled by the driver when the transmit completion arrives.
		129	*/
		130	struct xsk_tx_metadata {
		131	__u64 flags;
		132
		133	union {
		134	struct {
		135	/* XDP_TXMD_FLAGS_CHECKSUM */
		136
		137	/* Offset from desc->addr where checksumming should start. */
		138	__u16 csum_start;
		139	/* Offset from csum_start where checksum should be stored. */
		140	__u16 csum_offset;
		141	} request;
		142
		143	struct {
		144	/* XDP_TXMD_FLAGS_TIMESTAMP */
		145	__u64 tx_timestamp;
		146	} completion;
		147	};
		148	};
		149
108	/* Rx/Tx descriptor */	150	/* Rx/Tx descriptor */
109	struct xdp_desc {	151	struct xdp_desc {
110	__u64 addr;	152	__u64 addr;
@@ -121,4 +163,7 @@ struct xdp_desc { · 10 unmodified lines
121	*/	163	*/
122	#define XDP_PKT_CONTD (1 << 0)	164	#define XDP_PKT_CONTD (1 << 0)
123		165
		166	/* TX packet carries valid metadata. */
		167	#define XDP_TX_METADATA (1 << 1)
		168
124	#endif /* _LINUX_IF_XDP_H */	169	#endif /* _LINUX_IF_XDP_H */

include/uapi/linux/iio/types.h+2−0

 	IIO_MOD_CO2,
 	IIO_MOD_VOC,
 	IIO_MOD_LIGHT_UV,
+	IIO_MOD_LIGHT_UVA,
+	IIO_MOD_LIGHT_UVB,
 	IIO_MOD_LIGHT_DUV,
 	IIO_MOD_PM1,
 	IIO_MOD_PM2P5,

include/uapi/linux/io_uring.h+19−0

 		__u32		uring_cmd_flags;
 		__u32		waitid_flags;
 		__u32		futex_flags;
+		__u32		install_fd_flags;
 	};
 	__u64	user_data;	/* data to be passed back at completion time */
 	/* pack this to avoid bogus arm OABI complaints */
 	IORING_OP_FUTEX_WAIT,
 	IORING_OP_FUTEX_WAKE,
 	IORING_OP_FUTEX_WAITV,
+	IORING_OP_FIXED_FD_INSTALL,
 	/* this goes last, obviously */
 	IORING_OP_LAST,
 /* Pass through the flags from sqe->file_index to cqe->flags */
 #define IORING_MSG_RING_FLAGS_PASS	(1U << 1)
+/*
+ * IORING_OP_FIXED_FD_INSTALL flags (sqe->install_fd_flags)
+ *
+ * IORING_FIXED_FD_NO_CLOEXEC	Don't mark the fd as O_CLOEXEC
+ */
+#define IORING_FIXED_FD_NO_CLOEXEC	(1U << 0)
 /*
  * IO completion data structure (Completion Queue Entry)
  */
 	/* register a range of fixed file slots for automatic slot allocation */
 	IORING_REGISTER_FILE_ALLOC_RANGE	= 25,
+	/* return status information for a buffer group */
+	IORING_REGISTER_PBUF_STATUS		= 26,
 	/* this goes last */
 	IORING_REGISTER_LAST,
 	__u64	resv[3];
 };
+/* argument for IORING_REGISTER_PBUF_STATUS */
+struct io_uring_buf_status {
+	__u32	buf_group;	/* input */
+	__u32	head;		/* output */
+	__u32	resv[8];
+};
 /*
  * io_uring_restriction->opcode values
  */

include/uapi/linux/iommufd.h+79−0

@@ -49,6 +49,7 @@ enum { · 48 unmodified lines
49	IOMMUFD_CMD_GET_HW_INFO,	49	IOMMUFD_CMD_GET_HW_INFO,
50	IOMMUFD_CMD_HWPT_SET_DIRTY_TRACKING,	50	IOMMUFD_CMD_HWPT_SET_DIRTY_TRACKING,
51	IOMMUFD_CMD_HWPT_GET_DIRTY_BITMAP,	51	IOMMUFD_CMD_HWPT_GET_DIRTY_BITMAP,
		52	IOMMUFD_CMD_HWPT_INVALIDATE,
52	};	53	};
53		54
54	/**	55	/**
@@ -613,4 +614,82 @@ struct iommu_hwpt_get_dirty_bitmap { · 558 unmodified lines
613	#define IOMMU_HWPT_GET_DIRTY_BITMAP _IO(IOMMUFD_TYPE, \	614	#define IOMMU_HWPT_GET_DIRTY_BITMAP _IO(IOMMUFD_TYPE, \
614	IOMMUFD_CMD_HWPT_GET_DIRTY_BITMAP)	615	IOMMUFD_CMD_HWPT_GET_DIRTY_BITMAP)
615		616
		617	/**
		618	* enum iommu_hwpt_invalidate_data_type - IOMMU HWPT Cache Invalidation
		619	* Data Type
		620	* @IOMMU_HWPT_INVALIDATE_DATA_VTD_S1: Invalidation data for VTD_S1
		621	*/
		622	enum iommu_hwpt_invalidate_data_type {
		623	IOMMU_HWPT_INVALIDATE_DATA_VTD_S1,
		624	};
		625
		626	/**
		627	* enum iommu_hwpt_vtd_s1_invalidate_flags - Flags for Intel VT-d
		628	* stage-1 cache invalidation
		629	* @IOMMU_VTD_INV_FLAGS_LEAF: Indicates whether the invalidation applies
		630	* to all-levels page structure cache or just
		631	* the leaf PTE cache.
		632	*/
		633	enum iommu_hwpt_vtd_s1_invalidate_flags {
		634	IOMMU_VTD_INV_FLAGS_LEAF = 1 << 0,
		635	};
		636
		637	/**
		638	* struct iommu_hwpt_vtd_s1_invalidate - Intel VT-d cache invalidation
		639	* (IOMMU_HWPT_INVALIDATE_DATA_VTD_S1)
		640	* @addr: The start address of the range to be invalidated. It needs to
		641	* be 4KB aligned.
		642	* @npages: Number of contiguous 4K pages to be invalidated.
		643	* @flags: Combination of enum iommu_hwpt_vtd_s1_invalidate_flags
		644	* @__reserved: Must be 0
		645	*
		646	* The Intel VT-d specific invalidation data for user-managed stage-1 cache
		647	* invalidation in nested translation. Userspace uses this structure to
		648	* tell the impacted cache scope after modifying the stage-1 page table.
		649	*
		650	* Invalidating all the caches related to the page table by setting @addr
		651	* to be 0 and @npages to be U64_MAX.
		652	*
		653	* The device TLB will be invalidated automatically if ATS is enabled.
		654	*/
		655	struct iommu_hwpt_vtd_s1_invalidate {
		656	__aligned_u64 addr;
		657	__aligned_u64 npages;
		658	__u32 flags;
		659	__u32 __reserved;
		660	};
		661
		662	/**
		663	* struct iommu_hwpt_invalidate - ioctl(IOMMU_HWPT_INVALIDATE)
		664	* @size: sizeof(struct iommu_hwpt_invalidate)
		665	* @hwpt_id: ID of a nested HWPT for cache invalidation
		666	* @data_uptr: User pointer to an array of driver-specific cache invalidation
		667	* data.
		668	* @data_type: One of enum iommu_hwpt_invalidate_data_type, defining the data
		669	* type of all the entries in the invalidation request array. It
		670	* should be a type supported by the hwpt pointed by @hwpt_id.
		671	* @entry_len: Length (in bytes) of a request entry in the request array
		672	* @entry_num: Input the number of cache invalidation requests in the array.
		673	* Output the number of requests successfully handled by kernel.
		674	* @__reserved: Must be 0.
		675	*
		676	* Invalidate the iommu cache for user-managed page table. Modifications on a
		677	* user-managed page table should be followed by this operation to sync cache.
		678	* Each ioctl can support one or more cache invalidation requests in the array
		679	* that has a total size of @entry_len * @entry_num.
		680	*
		681	* An empty invalidation request array by setting @entry_num==0 is allowed, and
		682	* @entry_len and @data_uptr would be ignored in this case. This can be used to
		683	* check if the given @data_type is supported or not by kernel.
		684	*/
		685	struct iommu_hwpt_invalidate {
		686	__u32 size;
		687	__u32 hwpt_id;
		688	__aligned_u64 data_uptr;
		689	__u32 data_type;
		690	__u32 entry_len;
		691	__u32 entry_num;
		692	__u32 __reserved;
		693	};
		694	#define IOMMU_HWPT_INVALIDATE _IO(IOMMUFD_TYPE, IOMMUFD_CMD_HWPT_INVALIDATE)
616	#endif	695	#endif

include/uapi/linux/kexec.h+1−0

@@ -25,6 +25,7 @@ · 24 unmodified lines
25	#define KEXEC_FILE_UNLOAD 0x00000001	25	#define KEXEC_FILE_UNLOAD 0x00000001
26	#define KEXEC_FILE_ON_CRASH 0x00000002	26	#define KEXEC_FILE_ON_CRASH 0x00000002
27	#define KEXEC_FILE_NO_INITRAMFS 0x00000004	27	#define KEXEC_FILE_NO_INITRAMFS 0x00000004
		28	#define KEXEC_FILE_DEBUG 0x00000008
28		29
29	/* These values match the ELF architecture values.	30	/* These values match the ELF architecture values.
30	* Unless there is a good reason that should continue to be the case.	31	* Unless there is a good reason that should continue to be the case.

include/uapi/linux/kvm.h+50−90

 #define KVM_API_VERSION 12
-/* *** Deprecated interfaces *** */
-#define KVM_TRC_SHIFT           16
-#define KVM_TRC_ENTRYEXIT       (1 << KVM_TRC_SHIFT)
-#define KVM_TRC_HANDLER         (1 << (KVM_TRC_SHIFT + 1))
-#define KVM_TRC_VMENTRY         (KVM_TRC_ENTRYEXIT + 0x01)
-#define KVM_TRC_VMEXIT          (KVM_TRC_ENTRYEXIT + 0x02)
-#define KVM_TRC_PAGE_FAULT      (KVM_TRC_HANDLER + 0x01)
-#define KVM_TRC_HEAD_SIZE       12
-#define KVM_TRC_CYCLE_SIZE      8
-#define KVM_TRC_EXTRA_MAX       7
-#define KVM_TRC_INJ_VIRQ         (KVM_TRC_HANDLER + 0x02)
-#define KVM_TRC_REDELIVER_EVT    (KVM_TRC_HANDLER + 0x03)
-#define KVM_TRC_PEND_INTR        (KVM_TRC_HANDLER + 0x04)
-#define KVM_TRC_IO_READ          (KVM_TRC_HANDLER + 0x05)
-#define KVM_TRC_IO_WRITE         (KVM_TRC_HANDLER + 0x06)
-#define KVM_TRC_CR_READ          (KVM_TRC_HANDLER + 0x07)
-#define KVM_TRC_CR_WRITE         (KVM_TRC_HANDLER + 0x08)
-#define KVM_TRC_DR_READ          (KVM_TRC_HANDLER + 0x09)
-#define KVM_TRC_DR_WRITE         (KVM_TRC_HANDLER + 0x0A)
-#define KVM_TRC_MSR_READ         (KVM_TRC_HANDLER + 0x0B)
-#define KVM_TRC_MSR_WRITE        (KVM_TRC_HANDLER + 0x0C)
-#define KVM_TRC_CPUID            (KVM_TRC_HANDLER + 0x0D)
-#define KVM_TRC_INTR             (KVM_TRC_HANDLER + 0x0E)
-#define KVM_TRC_NMI              (KVM_TRC_HANDLER + 0x0F)
-#define KVM_TRC_VMMCALL          (KVM_TRC_HANDLER + 0x10)
-#define KVM_TRC_HLT              (KVM_TRC_HANDLER + 0x11)
-#define KVM_TRC_CLTS             (KVM_TRC_HANDLER + 0x12)
-#define KVM_TRC_LMSW             (KVM_TRC_HANDLER + 0x13)
-#define KVM_TRC_APIC_ACCESS      (KVM_TRC_HANDLER + 0x14)
-#define KVM_TRC_TDP_FAULT        (KVM_TRC_HANDLER + 0x15)
-#define KVM_TRC_GTLB_WRITE       (KVM_TRC_HANDLER + 0x16)
-#define KVM_TRC_STLB_WRITE       (KVM_TRC_HANDLER + 0x17)
-#define KVM_TRC_STLB_INVAL       (KVM_TRC_HANDLER + 0x18)
-#define KVM_TRC_PPC_INSTR        (KVM_TRC_HANDLER + 0x19)
-struct kvm_user_trace_setup {
-	__u32 buf_size;
-	__u32 buf_nr;
-};
-#define __KVM_DEPRECATED_MAIN_W_0x06 \
-	_IOW(KVMIO, 0x06, struct kvm_user_trace_setup)
-#define __KVM_DEPRECATED_MAIN_0x07 _IO(KVMIO, 0x07)
-#define __KVM_DEPRECATED_MAIN_0x08 _IO(KVMIO, 0x08)
-#define __KVM_DEPRECATED_VM_R_0x70 _IOR(KVMIO, 0x70, struct kvm_assigned_irq)
-struct kvm_breakpoint {
-	__u32 enabled;
-	__u32 padding;
-	__u64 address;
-};
-struct kvm_debug_guest {
-	__u32 enabled;
-	__u32 pad;
-	struct kvm_breakpoint breakpoints[4];
-	__u32 singlestep;
-};
-#define __KVM_DEPRECATED_VCPU_W_0x87 _IOW(KVMIO, 0x87, struct kvm_debug_guest)
-/* *** End of deprecated interfaces *** */
 /* for KVM_SET_USER_MEMORY_REGION */
 struct kvm_userspace_memory_region {
 	__u32 slot;
 	__u64 userspace_addr; /* start of the userspace allocated memory */
 };
+/* for KVM_SET_USER_MEMORY_REGION2 */
+struct kvm_userspace_memory_region2 {
+	__u32 slot;
+	__u32 flags;
+	__u64 guest_phys_addr;
+	__u64 memory_size;
+	__u64 userspace_addr;
+	__u64 guest_memfd_offset;
+	__u32 guest_memfd;
+	__u32 pad1;
+	__u64 pad2[14];
+};
 /*
  * The bit 0 ~ bit 15 of kvm_userspace_memory_region::flags are visible for
  * userspace, other bits are reserved for kvm internal use which are defined
  */
 #define KVM_MEM_LOG_DIRTY_PAGES	(1UL << 0)
 #define KVM_MEM_READONLY	(1UL << 1)
+#define KVM_MEM_GUEST_MEMFD	(1UL << 2)
 /* for KVM_IRQ_LINE */
 struct kvm_irq_level {
 #define KVM_EXIT_RISCV_CSR        36
 #define KVM_EXIT_NOTIFY           37
 #define KVM_EXIT_LOONGARCH_IOCSR  38
+#define KVM_EXIT_MEMORY_FAULT     39
 /* For KVM_EXIT_INTERNAL_ERROR */
 /* Emulate instruction failed. */
 #define KVM_NOTIFY_CONTEXT_INVALID	(1 << 0)
 			__u32 flags;
 		} notify;
+		/* KVM_EXIT_MEMORY_FAULT */
+		struct {
+#define KVM_MEMORY_EXIT_FLAG_PRIVATE	(1ULL << 3)
+			__u64 flags;
+			__u64 gpa;
+			__u64 size;
+		} memory_fault;
 		/* Fix the size of the union. */
 		char padding[256];
 	};
  */
 #define KVM_GET_VCPU_MMAP_SIZE    _IO(KVMIO,   0x04) /* in bytes */
 #define KVM_GET_SUPPORTED_CPUID   _IOWR(KVMIO, 0x05, struct kvm_cpuid2)
-#define KVM_TRACE_ENABLE          __KVM_DEPRECATED_MAIN_W_0x06
-#define KVM_TRACE_PAUSE           __KVM_DEPRECATED_MAIN_0x07
-#define KVM_TRACE_DISABLE         __KVM_DEPRECATED_MAIN_0x08
 #define KVM_GET_EMULATED_CPUID	  _IOWR(KVMIO, 0x09, struct kvm_cpuid2)
 #define KVM_GET_MSR_FEATURE_INDEX_LIST    _IOWR(KVMIO, 0x0a, struct kvm_msr_list)
 #define KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE 228
 #define KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES 229
 #define KVM_CAP_ARM_SUPPORTED_REG_MASK_RANGES 230
+#define KVM_CAP_USER_MEMORY2 231
+#define KVM_CAP_MEMORY_FAULT_INFO 232
+#define KVM_CAP_MEMORY_ATTRIBUTES 233
+#define KVM_CAP_GUEST_MEMFD 234
+#define KVM_CAP_VM_TYPES 235
 #ifdef KVM_CAP_IRQ_ROUTING
 #define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL	(1 << 4)
 #define KVM_XEN_HVM_CONFIG_EVTCHN_SEND		(1 << 5)
 #define KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG	(1 << 6)
+#define KVM_XEN_HVM_CONFIG_PVCLOCK_TSC_UNSTABLE	(1 << 7)
 struct kvm_xen_hvm_config {
 	__u32 flags;
 					struct kvm_userspace_memory_region)
 #define KVM_SET_TSS_ADDR          _IO(KVMIO,   0x47)
 #define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO,  0x48, __u64)
+#define KVM_SET_USER_MEMORY_REGION2 _IOW(KVMIO, 0x49, \
+					 struct kvm_userspace_memory_region2)
 /* enable ucontrol for s390 */
 struct kvm_s390_ucas_mapping {
 			_IOW(KVMIO,  0x67, struct kvm_coalesced_mmio_zone)
 #define KVM_UNREGISTER_COALESCED_MMIO \
 			_IOW(KVMIO,  0x68, struct kvm_coalesced_mmio_zone)
-#define KVM_ASSIGN_PCI_DEVICE     _IOR(KVMIO,  0x69, \
-				       struct kvm_assigned_pci_dev)
 #define KVM_SET_GSI_ROUTING       _IOW(KVMIO,  0x6a, struct kvm_irq_routing)
-/* deprecated, replaced by KVM_ASSIGN_DEV_IRQ */
-#define KVM_ASSIGN_IRQ            __KVM_DEPRECATED_VM_R_0x70
-#define KVM_ASSIGN_DEV_IRQ        _IOW(KVMIO,  0x70, struct kvm_assigned_irq)
 #define KVM_REINJECT_CONTROL      _IO(KVMIO,   0x71)
-#define KVM_DEASSIGN_PCI_DEVICE   _IOW(KVMIO,  0x72, \
-				       struct kvm_assigned_pci_dev)
-#define KVM_ASSIGN_SET_MSIX_NR    _IOW(KVMIO,  0x73, \
-				       struct kvm_assigned_msix_nr)
-#define KVM_ASSIGN_SET_MSIX_ENTRY _IOW(KVMIO,  0x74, \
-				       struct kvm_assigned_msix_entry)
-#define KVM_DEASSIGN_DEV_IRQ      _IOW(KVMIO,  0x75, struct kvm_assigned_irq)
 #define KVM_IRQFD                 _IOW(KVMIO,  0x76, struct kvm_irqfd)
 #define KVM_CREATE_PIT2		  _IOW(KVMIO,  0x77, struct kvm_pit_config)
 #define KVM_SET_BOOT_CPU_ID       _IO(KVMIO,   0x78)
 *  KVM_CAP_VM_TSC_CONTROL to set defaults for a VM */
 #define KVM_SET_TSC_KHZ           _IO(KVMIO,  0xa2)
 #define KVM_GET_TSC_KHZ           _IO(KVMIO,  0xa3)
-/* Available with KVM_CAP_PCI_2_3 */
-#define KVM_ASSIGN_SET_INTX_MASK  _IOW(KVMIO,  0xa4, \
-				       struct kvm_assigned_pci_dev)
 /* Available with KVM_CAP_SIGNAL_MSI */
 #define KVM_SIGNAL_MSI            _IOW(KVMIO,  0xa5, struct kvm_msi)
 /* Available with KVM_CAP_PPC_GET_SMMU_INFO */
 #define KVM_SET_SREGS             _IOW(KVMIO,  0x84, struct kvm_sregs)
 #define KVM_TRANSLATE             _IOWR(KVMIO, 0x85, struct kvm_translation)
 #define KVM_INTERRUPT             _IOW(KVMIO,  0x86, struct kvm_interrupt)
-/* KVM_DEBUG_GUEST is no longer supported, use KVM_SET_GUEST_DEBUG instead */
-#define KVM_DEBUG_GUEST           __KVM_DEPRECATED_VCPU_W_0x87
 #define KVM_GET_MSRS              _IOWR(KVMIO, 0x88, struct kvm_msrs)
 #define KVM_SET_MSRS              _IOW(KVMIO,  0x89, struct kvm_msrs)
 #define KVM_SET_CPUID             _IOW(KVMIO,  0x8a, struct kvm_cpuid)
 /* flags for kvm_s390_zpci_op->u.reg_aen.flags */
 #define KVM_S390_ZPCIOP_REGAEN_HOST    (1 << 0)
+/* Available with KVM_CAP_MEMORY_ATTRIBUTES */
+#define KVM_SET_MEMORY_ATTRIBUTES              _IOW(KVMIO,  0xd2, struct kvm_memory_attributes)
+struct kvm_memory_attributes {
+	__u64 address;
+	__u64 size;
+	__u64 attributes;
+	__u64 flags;
+};
+#define KVM_MEMORY_ATTRIBUTE_PRIVATE           (1ULL << 3)
+#define KVM_CREATE_GUEST_MEMFD	_IOWR(KVMIO,  0xd4, struct kvm_create_guest_memfd)
+struct kvm_create_guest_memfd {
+	__u64 size;
+	__u64 flags;
+	__u64 reserved[6];
+};
 #endif /* __LINUX_KVM_H */

include/uapi/linux/lsm.h+90−0

@@ -0,0 +1,90 @@
	1	/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
	2	/*
	3	* Linux Security Modules (LSM) - User space API
	4	*
	5	* Copyright (C) 2022 Casey Schaufler <casey@schaufler-ca.com>
	6	* Copyright (C) 2022 Intel Corporation
	7	*/
	8
	9	#ifndef _UAPI_LINUX_LSM_H
	10	#define _UAPI_LINUX_LSM_H
	11
	12	#include <linux/stddef.h>
	13	#include <linux/types.h>
	14	#include <linux/unistd.h>
	15
	16	/**
	17	* struct lsm_ctx - LSM context information
	18	* @id: the LSM id number, see LSM_ID_XXX
	19	* @flags: LSM specific flags
	20	* @len: length of the lsm_ctx struct, @ctx and any other data or padding
	21	* @ctx_len: the size of @ctx
	22	* @ctx: the LSM context value
	23	*
	24	* The @len field MUST be equal to the size of the lsm_ctx struct
	25	* plus any additional padding and/or data placed after @ctx.
	26	*
	27	* In all cases @ctx_len MUST be equal to the length of @ctx.
	28	* If @ctx is a string value it should be nul terminated with
	29	* @ctx_len equal to `strlen(@ctx) + 1`. Binary values are
	30	* supported.
	31	*
	32	* The @flags and @ctx fields SHOULD only be interpreted by the
	33	* LSM specified by @id; they MUST be set to zero/0 when not used.
	34	*/
	35	struct lsm_ctx {
	36	__u64 id;
	37	__u64 flags;
	38	__u64 len;
	39	__u64 ctx_len;
	40	__u8 ctx[] __counted_by(ctx_len);
	41	};
	42
	43	/*
	44	* ID tokens to identify Linux Security Modules (LSMs)
	45	*
	46	* These token values are used to uniquely identify specific LSMs
	47	* in the kernel as well as in the kernel's LSM userspace API.
	48	*
	49	* A value of zero/0 is considered undefined and should not be used
	50	* outside the kernel. Values 1-99 are reserved for potential
	51	* future use.
	52	*/
	53	#define LSM_ID_UNDEF 0
	54	#define LSM_ID_CAPABILITY 100
	55	#define LSM_ID_SELINUX 101
	56	#define LSM_ID_SMACK 102
	57	#define LSM_ID_TOMOYO 103
	58	#define LSM_ID_APPARMOR 104
	59	#define LSM_ID_YAMA 105
	60	#define LSM_ID_LOADPIN 106
	61	#define LSM_ID_SAFESETID 107
	62	#define LSM_ID_LOCKDOWN 108
	63	#define LSM_ID_BPF 109
	64	#define LSM_ID_LANDLOCK 110
	65
	66	/*
	67	* LSM_ATTR_XXX definitions identify different LSM attributes
	68	* which are used in the kernel's LSM userspace API. Support
	69	* for these attributes vary across the different LSMs. None
	70	* are required.
	71	*
	72	* A value of zero/0 is considered undefined and should not be used
	73	* outside the kernel. Values 1-99 are reserved for potential
	74	* future use.
	75	*/
	76	#define LSM_ATTR_UNDEF 0
	77	#define LSM_ATTR_CURRENT 100
	78	#define LSM_ATTR_EXEC 101
	79	#define LSM_ATTR_FSCREATE 102
	80	#define LSM_ATTR_KEYCREATE 103
	81	#define LSM_ATTR_PREV 104
	82	#define LSM_ATTR_SOCKCREATE 105
	83
	84	/*
	85	* LSM_FLAG_XXX definitions identify special handling instructions
	86	* for the API.
	87	*/
	88	#define LSM_FLAG_SINGLE 0x0001
	89
	90	#endif /* _UAPI_LINUX_LSM_H */

include/uapi/linux/mei.h+2−2

@@ -100,14 +100,14 @@ struct mei_connect_client_data_vtag { · 99 unmodified lines
100	* a FW client on a tagged channel. From this point on, every read	100	* a FW client on a tagged channel. From this point on, every read
101	* and write will communicate with the associated FW client	101	* and write will communicate with the associated FW client
102	* on the tagged channel.	102	* on the tagged channel.
103	* Upone close() the communication is terminated.	103	* Upon close() the communication is terminated.
104	*	104	*
105	* The IOCTL argument is a struct with a union that contains	105	* The IOCTL argument is a struct with a union that contains
106	* the input parameter and the output parameter for this IOCTL.	106	* the input parameter and the output parameter for this IOCTL.
107	*	107	*
108	* The input parameter is UUID of the FW Client, a vtag [0,255].	108	* The input parameter is UUID of the FW Client, a vtag [0,255].
109	* The output parameter is the properties of the FW client	109	* The output parameter is the properties of the FW client
110	* (FW protocool version and max message size).	110	* (FW protocol version and max message size).
111	*	111	*
112	* Clients that do not support tagged connection	112	* Clients that do not support tagged connection
113	* will respond with -EOPNOTSUPP.	113	* will respond with -EOPNOTSUPP.

include/uapi/linux/mount.h+70−0

@@ -138,4 +138,74 @@ struct mount_attr { · 137 unmodified lines
138	/* List of all mount_attr versions. */	138	/* List of all mount_attr versions. */
139	#define MOUNT_ATTR_SIZE_VER0 32 /* sizeof first published struct */	139	#define MOUNT_ATTR_SIZE_VER0 32 /* sizeof first published struct */
140		140
		141
		142	/*
		143	* Structure for getting mount/superblock/filesystem info with statmount(2).
		144	*
		145	* The interface is similar to statx(2): individual fields or groups can be
		146	* selected with the @mask argument of statmount(). Kernel will set the @mask
		147	* field according to the supported fields.
		148	*
		149	* If string fields are selected, then the caller needs to pass a buffer that
		150	* has space after the fixed part of the structure. Nul terminated strings are
		151	* copied there and offsets relative to @str are stored in the relevant fields.
		152	* If the buffer is too small, then EOVERFLOW is returned. The actually used
		153	* size is returned in @size.
		154	*/
		155	struct statmount {
		156	__u32 size; /* Total size, including strings */
		157	__u32 __spare1;
		158	__u64 mask; /* What results were written */
		159	__u32 sb_dev_major; /* Device ID */
		160	__u32 sb_dev_minor;
		161	__u64 sb_magic; /* ..._SUPER_MAGIC */
		162	__u32 sb_flags; /* SB_{RDONLY,SYNCHRONOUS,DIRSYNC,LAZYTIME} */
		163	__u32 fs_type; /* [str] Filesystem type */
		164	__u64 mnt_id; /* Unique ID of mount */
		165	__u64 mnt_parent_id; /* Unique ID of parent (for root == mnt_id) */
		166	__u32 mnt_id_old; /* Reused IDs used in proc/.../mountinfo */
		167	__u32 mnt_parent_id_old;
		168	__u64 mnt_attr; /* MOUNT_ATTR_... */
		169	__u64 mnt_propagation; /* MS_{SHARED,SLAVE,PRIVATE,UNBINDABLE} */
		170	__u64 mnt_peer_group; /* ID of shared peer group */
		171	__u64 mnt_master; /* Mount receives propagation from this ID */
		172	__u64 propagate_from; /* Propagation from in current namespace */
		173	__u32 mnt_root; /* [str] Root of mount relative to root of fs */
		174	__u32 mnt_point; /* [str] Mountpoint relative to current root */
		175	__u64 __spare2[50];
		176	char str[]; /* Variable size part containing strings */
		177	};
		178
		179	/*
		180	* Structure for passing mount ID and miscellaneous parameters to statmount(2)
		181	* and listmount(2).
		182	*
		183	* For statmount(2) @param represents the request mask.
		184	* For listmount(2) @param represents the last listed mount id (or zero).
		185	*/
		186	struct mnt_id_req {
		187	__u32 size;
		188	__u32 spare;
		189	__u64 mnt_id;
		190	__u64 param;
		191	};
		192
		193	/* List of all mnt_id_req versions. */
		194	#define MNT_ID_REQ_SIZE_VER0 24 /* sizeof first published struct */
		195
		196	/*
		197	* @mask bits for statmount(2)
		198	*/
		199	#define STATMOUNT_SB_BASIC 0x00000001U /* Want/got sb_... */
		200	#define STATMOUNT_MNT_BASIC 0x00000002U /* Want/got mnt_... */
		201	#define STATMOUNT_PROPAGATE_FROM 0x00000004U /* Want/got propagate_from */
		202	#define STATMOUNT_MNT_ROOT 0x00000008U /* Want/got mnt_root */
		203	#define STATMOUNT_MNT_POINT 0x00000010U /* Want/got mnt_point */
		204	#define STATMOUNT_FS_TYPE 0x00000020U /* Want/got fs_type */
		205
		206	/*
		207	* Special @mnt_id values that can be passed to listmount
		208	*/
		209	#define LSMT_ROOT 0xffffffffffffffff /* root mount */
		210
141	#endif /* _UAPI_LINUX_MOUNT_H */	211	#endif /* _UAPI_LINUX_MOUNT_H */

include/uapi/linux/mptcp.h+1−0

@@ -57,6 +57,7 @@ struct mptcp_info { · 56 unmodified lines
57	__u64 mptcpi_bytes_sent;	57	__u64 mptcpi_bytes_sent;
58	__u64 mptcpi_bytes_received;	58	__u64 mptcpi_bytes_received;
59	__u64 mptcpi_bytes_acked;	59	__u64 mptcpi_bytes_acked;
		60	__u8 mptcpi_subflows_total;
60	};	61	};
61		62
62	/* MPTCP Reset reason codes, rfc8684 */	63	/* MPTCP Reset reason codes, rfc8684 */

include/uapi/linux/mptcp_pm.h+1−1

@@ -1,6 +1,6 @@
1	/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */	1	/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
2	/* Do not edit directly, auto-generated from: */	2	/* Do not edit directly, auto-generated from: */
3	/* Documentation/netlink/specs/mptcp.yaml */	3	/* Documentation/netlink/specs/mptcp_pm.yaml */
4	/* YNL-GEN uapi header */	4	/* YNL-GEN uapi header */
5		5
6	#ifndef _UAPI_LINUX_MPTCP_PM_H	6	#ifndef _UAPI_LINUX_MPTCP_PM_H

include/uapi/linux/netdev.h+78−2

@@ -44,13 +44,30 @@ enum netdev_xdp_act { · 43 unmodified lines
44	* timestamp via bpf_xdp_metadata_rx_timestamp().	44	* timestamp via bpf_xdp_metadata_rx_timestamp().
45	* @NETDEV_XDP_RX_METADATA_HASH: Device is capable of exposing receive packet	45	* @NETDEV_XDP_RX_METADATA_HASH: Device is capable of exposing receive packet
46	* hash via bpf_xdp_metadata_rx_hash().	46	* hash via bpf_xdp_metadata_rx_hash().
		47	* @NETDEV_XDP_RX_METADATA_VLAN_TAG: Device is capable of exposing receive
		48	* packet VLAN tag via bpf_xdp_metadata_rx_vlan_tag().
47	*/	49	*/
48	enum netdev_xdp_rx_metadata {	50	enum netdev_xdp_rx_metadata {
49	NETDEV_XDP_RX_METADATA_TIMESTAMP = 1,	51	NETDEV_XDP_RX_METADATA_TIMESTAMP = 1,
50	NETDEV_XDP_RX_METADATA_HASH = 2,	52	NETDEV_XDP_RX_METADATA_HASH = 2,
		53	NETDEV_XDP_RX_METADATA_VLAN_TAG = 4,
		54	};
51		55
52	/* private: */	56	/**
53	NETDEV_XDP_RX_METADATA_MASK = 3,	57	* enum netdev_xsk_flags
		58	* @NETDEV_XSK_FLAGS_TX_TIMESTAMP: HW timestamping egress packets is supported
		59	* by the driver.
		60	* @NETDEV_XSK_FLAGS_TX_CHECKSUM: L3 checksum HW offload is supported by the
		61	* driver.
		62	*/
		63	enum netdev_xsk_flags {
		64	NETDEV_XSK_FLAGS_TX_TIMESTAMP = 1,
		65	NETDEV_XSK_FLAGS_TX_CHECKSUM = 2,
		66	};
		67
		68	enum netdev_queue_type {
		69	NETDEV_QUEUE_TYPE_RX,
		70	NETDEV_QUEUE_TYPE_TX,
54	};	71	};
55		72
56	enum {	73	enum {
@@ -59,21 +76,80 @@ enum { · 2 unmodified lines
59	NETDEV_A_DEV_XDP_FEATURES,	76	NETDEV_A_DEV_XDP_FEATURES,
60	NETDEV_A_DEV_XDP_ZC_MAX_SEGS,	77	NETDEV_A_DEV_XDP_ZC_MAX_SEGS,
61	NETDEV_A_DEV_XDP_RX_METADATA_FEATURES,	78	NETDEV_A_DEV_XDP_RX_METADATA_FEATURES,
		79	NETDEV_A_DEV_XSK_FEATURES,
62		80
63	__NETDEV_A_DEV_MAX,	81	__NETDEV_A_DEV_MAX,
64	NETDEV_A_DEV_MAX = (__NETDEV_A_DEV_MAX - 1)	82	NETDEV_A_DEV_MAX = (__NETDEV_A_DEV_MAX - 1)
65	};	83	};
66		84
		85	enum {
		86	NETDEV_A_PAGE_POOL_ID = 1,
		87	NETDEV_A_PAGE_POOL_IFINDEX,
		88	NETDEV_A_PAGE_POOL_NAPI_ID,
		89	NETDEV_A_PAGE_POOL_INFLIGHT,
		90	NETDEV_A_PAGE_POOL_INFLIGHT_MEM,
		91	NETDEV_A_PAGE_POOL_DETACH_TIME,
		92
		93	__NETDEV_A_PAGE_POOL_MAX,
		94	NETDEV_A_PAGE_POOL_MAX = (__NETDEV_A_PAGE_POOL_MAX - 1)
		95	};
		96
		97	enum {
		98	NETDEV_A_PAGE_POOL_STATS_INFO = 1,
		99	NETDEV_A_PAGE_POOL_STATS_ALLOC_FAST = 8,
		100	NETDEV_A_PAGE_POOL_STATS_ALLOC_SLOW,
		101	NETDEV_A_PAGE_POOL_STATS_ALLOC_SLOW_HIGH_ORDER,
		102	NETDEV_A_PAGE_POOL_STATS_ALLOC_EMPTY,
		103	NETDEV_A_PAGE_POOL_STATS_ALLOC_REFILL,
		104	NETDEV_A_PAGE_POOL_STATS_ALLOC_WAIVE,
		105	NETDEV_A_PAGE_POOL_STATS_RECYCLE_CACHED,
		106	NETDEV_A_PAGE_POOL_STATS_RECYCLE_CACHE_FULL,
		107	NETDEV_A_PAGE_POOL_STATS_RECYCLE_RING,
		108	NETDEV_A_PAGE_POOL_STATS_RECYCLE_RING_FULL,
		109	NETDEV_A_PAGE_POOL_STATS_RECYCLE_RELEASED_REFCNT,
		110
		111	__NETDEV_A_PAGE_POOL_STATS_MAX,
		112	NETDEV_A_PAGE_POOL_STATS_MAX = (__NETDEV_A_PAGE_POOL_STATS_MAX - 1)
		113	};
		114
		115	enum {
		116	NETDEV_A_NAPI_IFINDEX = 1,
		117	NETDEV_A_NAPI_ID,
		118	NETDEV_A_NAPI_IRQ,
		119	NETDEV_A_NAPI_PID,
		120
		121	__NETDEV_A_NAPI_MAX,
		122	NETDEV_A_NAPI_MAX = (__NETDEV_A_NAPI_MAX - 1)
		123	};
		124
		125	enum {
		126	NETDEV_A_QUEUE_ID = 1,
		127	NETDEV_A_QUEUE_IFINDEX,
		128	NETDEV_A_QUEUE_TYPE,
		129	NETDEV_A_QUEUE_NAPI_ID,
		130
		131	__NETDEV_A_QUEUE_MAX,
		132	NETDEV_A_QUEUE_MAX = (__NETDEV_A_QUEUE_MAX - 1)
		133	};
		134
67	enum {	135	enum {
68	NETDEV_CMD_DEV_GET = 1,	136	NETDEV_CMD_DEV_GET = 1,
69	NETDEV_CMD_DEV_ADD_NTF,	137	NETDEV_CMD_DEV_ADD_NTF,
70	NETDEV_CMD_DEV_DEL_NTF,	138	NETDEV_CMD_DEV_DEL_NTF,
71	NETDEV_CMD_DEV_CHANGE_NTF,	139	NETDEV_CMD_DEV_CHANGE_NTF,
		140	NETDEV_CMD_PAGE_POOL_GET,
		141	NETDEV_CMD_PAGE_POOL_ADD_NTF,
		142	NETDEV_CMD_PAGE_POOL_DEL_NTF,
		143	NETDEV_CMD_PAGE_POOL_CHANGE_NTF,
		144	NETDEV_CMD_PAGE_POOL_STATS_GET,
		145	NETDEV_CMD_QUEUE_GET,
		146	NETDEV_CMD_NAPI_GET,
72		147
73	__NETDEV_CMD_MAX,	148	__NETDEV_CMD_MAX,
74	NETDEV_CMD_MAX = (__NETDEV_CMD_MAX - 1)	149	NETDEV_CMD_MAX = (__NETDEV_CMD_MAX - 1)
75	};	150	};
76		151
77	#define NETDEV_MCGRP_MGMT "mgmt"	152	#define NETDEV_MCGRP_MGMT "mgmt"
		153	#define NETDEV_MCGRP_PAGE_POOL "page-pool"
78		154
79	#endif /* _UAPI_LINUX_NETDEV_H */	155	#endif /* _UAPI_LINUX_NETDEV_H */

include/uapi/linux/nl80211.h+140−45

  * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS
  * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:
  *  - a setup station entry is added, not yet authorized, without any rate
- *    or capability information, this just exists to avoid race conditions
+ *    or capability information; this just exists to avoid race conditions
  *  - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid
  *    to add rate and capability information to the station and at the same
  *    time mark it authorized.
  * DOC: Frame transmission/registration support
  *
  * Frame transmission and registration support exists to allow userspace
- * management entities such as wpa_supplicant react to management frames
+ * management entities such as wpa_supplicant to react to management frames
  * that are not being handled by the kernel. This includes, for example,
  * certain classes of action frames that cannot be handled in the kernel
  * for various reasons.
  *
  * Frame transmission allows userspace to send for example the required
  * responses to action frames. It is subject to some sanity checking,
- * but many frames can be transmitted. When a frame was transmitted, its
+ * but many frames can be transmitted. When a frame is transmitted, its
  * status is indicated to the sending socket.
  *
  * For more technical details, see the corresponding command descriptions
 /**
  * DOC: Virtual interface / concurrency capabilities
  *
- * Some devices are able to operate with virtual MACs, they can have
+ * Some devices are able to operate with virtual MACs; they can have
  * more than one virtual interface. The capability handling for this
  * is a bit complex though, as there may be a number of restrictions
  * on the types of concurrency that are supported.
  * Once concurrency is desired, more attributes must be observed:
  * To start with, since some interface types are purely managed in
  * software, like the AP-VLAN type in mac80211 for example, there's
- * an additional list of these, they can be added at any time and
+ * an additional list of these; they can be added at any time and
  * are only restricted by some semantic restrictions (e.g. AP-VLAN
  * cannot be added without a corresponding AP interface). This list
  * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
  * Packet coalesce feature helps to reduce number of received interrupts
  * to host by buffering these packets in firmware/hardware for some
  * predefined time. Received interrupt will be generated when one of the
- * following events occur.
+ * following events occurs.
  * a) Expiration of hardware timer whose expiration time is set to maximum
  * coalescing delay of matching coalesce rule.
  * b) Coalescing buffer in hardware reaches its limit.
  * rule.
  * a) Maximum coalescing delay
  * b) List of packet patterns which needs to be matched
- * c) Condition for coalescence. pattern 'match' or 'no match'
+ * c) Condition for coalescence: pattern 'match' or 'no match'
  * Multiple such rules can be created.
  */
 /**
  * DOC: FILS shared key authentication offload
  *
- * FILS shared key authentication offload can be advertized by drivers by
+ * FILS shared key authentication offload can be advertised by drivers by
  * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
  * FILS shared key authentication offload should be able to construct the
  * authentication and association frames for FILS shared key authentication and
  * The PMKSA can be maintained in userspace persistently so that it can be used
  * later after reboots or wifi turn off/on also.
  *
- * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
+ * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertised by a FILS
  * capable AP supporting PMK caching. It specifies the scope within which the
  * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
  * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
  * If the configuration needs to be applied for specific peer then the MAC
  * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
  * configuration will be applied for all the connected peers in the vif except
- * any peers that have peer specific configuration for the TID by default; if
+ * any peers that have peer-specific configuration for the TID by default; if
- * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values
+ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer-specific values
  * will be overwritten.
  *
- * All this configuration is valid only for STA's current connection
+ * All this configuration is valid only for STA's current connection,
- * i.e. the configuration will be reset to default when the STA connects back
+ * i.e., the configuration will be reset to default when the STA connects back
  * after disconnection/roaming, and this configuration will be cleared when
  * the interface goes down.
  */
  *	%NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
  *	not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
  *	scheduled scan will run in an infinite loop with the specified interval.
- *	These attributes are mutually exculsive,
+ *	These attributes are mutually exclusive,
  *	i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
  *	NL80211_ATTR_SCHED_SCAN_PLANS is defined.
  *	If for some reason scheduled scan is aborted by the driver, all scan
  *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
  *	is brought down while a scheduled scan was running.
  *
- * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
+ * @NL80211_CMD_GET_SURVEY: get survey results, e.g. channel occupation
  *      or noise level
  * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
  *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
  *	using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
  *	%NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
  *	authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
- *	advertized by a FILS capable AP identifying the scope of PMKSA in an
+ *	advertised by a FILS capable AP identifying the scope of PMKSA in an
  *	ESS.
  * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
  *	(for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
  *	%NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
- *	authentication.
+ *	authentication. Additionally in case of SAE offload and OWE offloads
+ *	PMKSA entry can be deleted using %NL80211_ATTR_SSID.
  * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
  *
  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
  *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
  *	the SSID (mainly for association, but is included in authentication
  *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
- *	%NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the
+ *	%NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequency of the
  *	channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
  *	authentication type. %NL80211_ATTR_IE is used to define IEs
  *	(VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
  *	reached.
  * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
  *	and the attributes determining channel width) the given interface
- *	(identifed by %NL80211_ATTR_IFINDEX) shall operate on.
+ *	(identified by %NL80211_ATTR_IFINDEX) shall operate on.
  *	In case multiple channels are supported by the device, the mechanism
  *	with which it switches channels is implementation-defined.
  *	When a monitor interface is given, it can only switch channel while
  *	inform userspace of the new replay counter.
  *
  * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
- *	of PMKSA caching dandidates.
+ *	of PMKSA caching candidates.
  *
  * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
  *	In addition, this can be used as an event to request userspace to take
  *
  * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
  *	by sending a null data frame to it and reporting when the frame is
- *	acknowleged. This is used to allow timing out inactive clients. Uses
+ *	acknowledged. This is used to allow timing out inactive clients. Uses
  *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
  *	direct reply with an %NL80211_ATTR_COOKIE that is later used to match
  *	up the event with the request. The event includes the same data and
  * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
  *	configured PMK for the authenticator address identified by
  *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates port is authorized and
- *	completed successfully. Drivers that support 4 way handshake offload
+ *	open for regular data traffic. For STA/P2P-client, this event is sent
- *	should send this event after indicating 802.1X FT assocation with
+ *	with AP MAC address and for AP/P2P-GO, the event carries the STA/P2P-
- *	%NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT
+ *	client MAC address.
- *	should be indicated instead.
+ *	Drivers that support 4 way handshake offload should send this event for
+ *	STA/P2P-client after successful 4-way HS or after 802.1X FT following
+ *	NL80211_CMD_CONNECT or NL80211_CMD_ROAM. Drivers using AP/P2P-GO 4-way
+ *	handshake offload should send this event on successful completion of
+ *	4-way handshake with the peer (STA/P2P-client).
  * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
  *	and RX notification.  This command is used both as a request to transmit
  *	a control port frame and as a notification that a control port frame
  *	Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide
  *	information about the removed STA MLD setup links.
  *
+ * @NL80211_CMD_SET_TID_TO_LINK_MAPPING: Set the TID to Link Mapping for a
+ *      non-AP MLD station. The %NL80211_ATTR_MLO_TTLM_DLINK and
+ *      %NL80211_ATTR_MLO_TTLM_ULINK attributes are used to specify the
+ *      TID to Link mapping for downlink/uplink traffic.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
 	NL80211_CMD_LINKS_REMOVED,
+	NL80211_CMD_SET_TID_TO_LINK_MAPPING,
 	/* add new commands above here */
 	/* used to define NL80211_CMD_MAX below */
  *	using %CMD_CONTROL_PORT_FRAME.  If control port routing over NL80211 is
  *	to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
  *	flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
- *	frames are not forwared over the control port.
+ *	frames are not forwarded over the control port.
  *
  * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
  *	We recommend using nested, driver-specific attributes within this.
  *	bit. Depending on which antennas are selected in the bitmap, 802.11n
  *	drivers can derive which chainmasks to use (if all antennas belonging to
  *	a particular chain are disabled this chain should be disabled) and if
- *	a chain has diversity antennas wether diversity should be used or not.
+ *	a chain has diversity antennas whether diversity should be used or not.
  *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
  *	derived from the available chains after applying the antenna mask.
- *	Non-802.11n drivers can derive wether to use diversity or not.
+ *	Non-802.11n drivers can derive whether to use diversity or not.
  *	Drivers may reject configurations or RX/TX mask combinations they cannot
  *	support by returning -EINVAL.
  *
  *	from successful FILS authentication and is used with
  *	%NL80211_CMD_CONNECT.
  *
- * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
+ * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertised by a FILS AP
  *	identifying the scope of PMKSAs. This is used with
  *	@NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
  *
  * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is
  *	disabled.
  *
+ * @NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA: Include BSS usage data, i.e.
+ *	include BSSes that can only be used in restricted scenarios and/or
+ *	cannot be used at all.
+ *
+ * @NL80211_ATTR_MLO_TTLM_DLINK: Binary attribute specifying the downlink TID to
+ *      link mapping. The length is 8 * sizeof(u16). For each TID the link
+ *      mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
+ *      in Draft P802.11be_D4.0.
+ * @NL80211_ATTR_MLO_TTLM_ULINK: Binary attribute specifying the uplink TID to
+ *      link mapping. The length is 8 * sizeof(u16). For each TID the link
+ *      mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
+ *      in Draft P802.11be_D4.0.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
 	NL80211_ATTR_MLO_LINK_DISABLED,
+	NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA,
+	NL80211_ATTR_MLO_TTLM_DLINK,
+	NL80211_ATTR_MLO_TTLM_ULINK,
 	/* add attributes here, update the policy in nl80211.c */
 	__NL80211_ATTR_AFTER_LAST,
  *	(100 * dBm).
  * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
  *	(enum nl80211_dfs_state)
- * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long
+ * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in milliseconds for how long
  *	this channel is in this DFS state.
  * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
  *	channel as the control channel
  *	in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that
  *	is allowed on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_DFS_CONCURRENT: Operation on this channel is
+ *	allowed for peer-to-peer or adhoc communication under the control
+ *	of a DFS master which operates on the same channel (FCC-594280 D01
+ *	Section B.3). Should be used together with %NL80211_RRF_DFS only.
+ * @NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT: Client connection to VLP AP
+ *	not allowed using this channel
+ * @NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT: Client connection to AFC AP
+ *	not allowed using this channel
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
 	NL80211_FREQUENCY_ATTR_NO_320MHZ,
 	NL80211_FREQUENCY_ATTR_NO_EHT,
 	NL80211_FREQUENCY_ATTR_PSD,
+	NL80211_FREQUENCY_ATTR_DFS_CONCURRENT,
+	NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT,
+	NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT,
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
  * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
  * @NL80211_RRF_NO_EHT: EHT operation not allowed
  * @NL80211_RRF_PSD: Ruleset has power spectral density value
+ * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for
+	peer-to-peer or adhoc communication under the control of a DFS master
+	which operates on the same channel (FCC-594280 D01 Section B.3).
+	Should be used together with %NL80211_RRF_DFS only.
+ * @NL80211_RRF_NO_UHB_VLP_CLIENT: Client connection to VLP AP not allowed
+ * @NL80211_RRF_NO_UHB_AFC_CLIENT: Client connection to AFC AP not allowed
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
 	NL80211_RRF_NO_320MHZ		= 1<<18,
 	NL80211_RRF_NO_EHT		= 1<<19,
 	NL80211_RRF_PSD			= 1<<20,
+	NL80211_RRF_DFS_CONCURRENT	= 1<<21,
+	NL80211_RRF_NO_UHB_VLP_CLIENT	= 1<<22,
+	NL80211_RRF_NO_UHB_AFC_CLIENT	= 1<<23,
 };
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
 	NL80211_BSS_CHAN_WIDTH_2,
 };
+/**
+ * enum nl80211_bss_use_for - bitmap indicating possible BSS use
+ * @NL80211_BSS_USE_FOR_NORMAL: Use this BSS for normal "connection",
+ *	including IBSS/MBSS depending on the type.
+ * @NL80211_BSS_USE_FOR_MLD_LINK: This BSS can be used as a link in an
+ *	MLO connection. Note that for an MLO connection, all links including
+ *	the assoc link must have this flag set, and the assoc link must
+ *	additionally have %NL80211_BSS_USE_FOR_NORMAL set.
+ */
+enum nl80211_bss_use_for {
+	NL80211_BSS_USE_FOR_NORMAL = 1 << 0,
+	NL80211_BSS_USE_FOR_MLD_LINK = 1 << 1,
+};
+/**
+ * enum nl80211_bss_cannot_use_reasons - reason(s) connection to a
+ *	BSS isn't possible
+ * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't
+ *	supported by the device, and this BSS entry represents one.
+ * @NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH: STA is not supporting
+ *	the AP power type (SP, VLP, AP) that the AP uses.
+ */
+enum nl80211_bss_cannot_use_reasons {
+	NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY	= 1 << 0,
+	NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH	= 1 << 1,
+};
 /**
  * enum nl80211_bss - netlink attributes for a BSS
  *
  * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
  * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8).
  * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it.
+ * @NL80211_BSS_USE_FOR: u32 bitmap attribute indicating what the BSS can be
+ *	used for, see &enum nl80211_bss_use_for.
+ * @NL80211_BSS_CANNOT_USE_REASONS: Indicates the reason that this BSS cannot
+ *	be used for all or some of the possible uses by the device reporting it,
+ *	even though its presence was detected.
+ *	This is a u64 attribute containing a bitmap of values from
+ *	&enum nl80211_cannot_use_reasons, note that the attribute may be missing
+ *	if no reasons are specified.
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
 	NL80211_BSS_FREQUENCY_OFFSET,
 	NL80211_BSS_MLO_LINK_ID,
 	NL80211_BSS_MLD_ADDR,
+	NL80211_BSS_USE_FOR,
+	NL80211_BSS_CANNOT_USE_REASONS,
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
  *	(%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
  * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
  *	per peer instead.
- * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates
+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribute, if set indicates
  *	that the new configuration overrides all previous peer
  *	configurations, otherwise previous peer specific configurations
  *	should be left untouched.
 /**
  * enum nl80211_coalesce_condition - coalesce rule conditions
- * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns
+ * @NL80211_COALESCE_CONDITION_MATCH: coalesce Rx packets when patterns
  *	in a rule are matched.
  * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns
  *	in a rule are not matched.
  * enum nl80211_plink_state - state of a mesh peer link finite state machine
  *
  * @NL80211_PLINK_LISTEN: initial state, considered the implicit
- *	state of non existent mesh peer links
+ *	state of non-existent mesh peer links
  * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
  *	this mesh peer
  * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
  *	request to use RRM (see %NL80211_ATTR_USE_RRM) with
  *	%NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
  *	the ASSOC_REQ_USE_RRM flag in the association request even if
- *	NL80211_FEATURE_QUIET is not advertized.
+ *	NL80211_FEATURE_QUIET is not advertised.
  * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air
  *	sniffer which means that it can be configured to hear packets from
  *	certain groups which can be configured by the
  *	the BSS that the interface that requested the scan is connected to
  *	(if available).
  * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the
- *	time the last beacon/probe was received. The time is the TSF of the
+ *	time the last beacon/probe was received. For a non-MLO connection, the
- *	BSS that the interface that requested the scan is connected to
+ *	time is the TSF of the BSS that the interface that requested the scan is
- *	(if available).
+ *	connected to (if available). For an MLO connection, the time is the TSF
+ *	of the BSS corresponding with link ID specified in the scan request (if
+ *	specified).
  * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
  *	channel dwell time.
  * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
- *	configuration (AP/mesh), supporting a legacy (non HT/VHT) rate.
+ *	configuration (AP/mesh), supporting a legacy (non-HT/VHT) rate.
  * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
  *	configuration (AP/mesh) with HT rates.
  * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
  * @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE
  *	handling in AP mode.
  *
+ * @NL80211_EXT_FEATURE_DFS_CONCURRENT: The device supports peer-to-peer or
+ *	ad hoc operation on DFS channels under the control of a concurrent
+ *	DFS master on the same channel as described in FCC-594280 D01
+ *	(Section B.3). This, for example, allows P2P GO and P2P clients to
+ *	operate on DFS channels as long as there's a concurrent BSS connection.
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
 	NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA,
 	NL80211_EXT_FEATURE_OWE_OFFLOAD,
 	NL80211_EXT_FEATURE_OWE_OFFLOAD_AP,
+	NL80211_EXT_FEATURE_DFS_CONCURRENT,
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
  *	request parameters IE in the probe request
  * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
  * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
- *	rate of at least 5.5M. In case non OCE AP is discovered in the channel,
+ *	rate of at least 5.5M. In case non-OCE AP is discovered in the channel,
  *	only the first probe req in the channel will be sent in high rate.
  * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
  *	tx deferral (dot11FILSProbeDelay shall be set to 15ms)
  *	received on the 2.4/5 GHz channels to actively scan only the 6GHz
  *	channels on which APs are expected to be found. Note that when not set,
  *	the scan logic would scan all 6GHz channels, but since transmission of
- *	probe requests on non PSC channels is limited, it is highly likely that
+ *	probe requests on non-PSC channels is limited, it is highly likely that
  *	these channels would passively be scanned. Also note that when the flag
  *	is set, in addition to the colocated APs, PSC channels would also be
  *	scanned if the user space has asked for it.
  *	The instance ID for the follow up Service Discovery Frame. This is u8.
  * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
  *	is follow up. This is a u8.
- *	The requestor instance ID for the follow up Service Discovery Frame.
+ *	The requester instance ID for the follow up Service Discovery Frame.
  * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
  *	follow up Service Discovery Frame. This is a binary attribute.
  * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
  * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
  *	trigger based ranging measurement is supported
  * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
- *	if non trigger based ranging measurement is supported
+ *	if non-trigger-based ranging measurement is supported
  *
  * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
  * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
  *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
  *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
  *	ranging will be used.
- * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based
+ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non-trigger-based
  *	ranging measurement (flag)
  *	This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
  *	mutually exclusive.
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames
  *	transmitted (u32, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames
- *	that were acknowleged (u32, optional)
+ *	that were acknowledged (u32, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the
  *	busy peer (u32, seconds)
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent

include/uapi/linux/nsm.h+31−0

@@ -0,0 +1,31 @@
	1	/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
	2	/*
	3	* Copyright Amazon.com, Inc. or its affiliates. All Rights Reserved.
	4	*/
	5
	6	#ifndef __UAPI_LINUX_NSM_H
	7	#define __UAPI_LINUX_NSM_H
	8
	9	#include <linux/ioctl.h>
	10	#include <linux/types.h>
	11
	12	#define NSM_MAGIC 0x0A
	13
	14	#define NSM_REQUEST_MAX_SIZE 0x1000
	15	#define NSM_RESPONSE_MAX_SIZE 0x3000
	16
	17	struct nsm_iovec {
	18	__u64 addr; /* Virtual address of target buffer */
	19	__u64 len; /* Length of target buffer */
	20	};
	21
	22	/* Raw NSM message. Only available with CAP_SYS_ADMIN. */
	23	struct nsm_raw {
	24	/* Request from user */
	25	struct nsm_iovec request;
	26	/* Response to user */
	27	struct nsm_iovec response;
	28	};
	29	#define NSM_IOCTL_RAW _IOWR(NSM_MAGIC, 0x0, struct nsm_raw)
	30
	31	#endif /* __UAPI_LINUX_NSM_H */

include/uapi/linux/pcitest.h+2−1

@@ -11,7 +11,8 @@ · 10 unmodified lines
11	#define __UAPI_LINUX_PCITEST_H	11	#define __UAPI_LINUX_PCITEST_H
12		12
13	#define PCITEST_BAR _IO('P', 0x1)	13	#define PCITEST_BAR _IO('P', 0x1)
14	#define PCITEST_LEGACY_IRQ _IO('P', 0x2)	14	#define PCITEST_INTX_IRQ _IO('P', 0x2)
		15	#define PCITEST_LEGACY_IRQ PCITEST_INTX_IRQ
15	#define PCITEST_MSI _IOW('P', 0x3, int)	16	#define PCITEST_MSI _IOW('P', 0x3, int)
16	#define PCITEST_WRITE _IOW('P', 0x4, unsigned long)	17	#define PCITEST_WRITE _IOW('P', 0x4, unsigned long)
17	#define PCITEST_READ _IOW('P', 0x5, unsigned long)	18	#define PCITEST_READ _IOW('P', 0x5, unsigned long)

include/uapi/linux/perf_event.h+13−0

 	PERF_SAMPLE_BRANCH_PRIV_SAVE_SHIFT	= 18, /* save privilege mode */
+	PERF_SAMPLE_BRANCH_COUNTERS_SHIFT	= 19, /* save occurrences of events on a branch */
 	PERF_SAMPLE_BRANCH_MAX_SHIFT		/* non-ABI */
 };
 	PERF_SAMPLE_BRANCH_PRIV_SAVE	= 1U << PERF_SAMPLE_BRANCH_PRIV_SAVE_SHIFT,
+	PERF_SAMPLE_BRANCH_COUNTERS	= 1U << PERF_SAMPLE_BRANCH_COUNTERS_SHIFT,
 	PERF_SAMPLE_BRANCH_MAX		= 1U << PERF_SAMPLE_BRANCH_MAX_SHIFT,
 };
 	 *	{ u64                   nr;
 	 *	  { u64	hw_idx; } && PERF_SAMPLE_BRANCH_HW_INDEX
 	 *        { u64 from, to, flags } lbr[nr];
+	 *        #
+	 *        # The format of the counters is decided by the
+	 *        # "branch_counter_nr" and "branch_counter_width",
+	 *        # which are defined in the ABI.
+	 *        #
+	 *        { u64 counters; } cntr[nr] && PERF_SAMPLE_BRANCH_COUNTERS
 	 *      } && PERF_SAMPLE_BRANCH_STACK
 	 *
 	 * 	{ u64			abi; # enum perf_sample_regs_abi
 		reserved:31;
 };
+/* Size of used info bits in struct perf_branch_entry */
+#define PERF_BRANCH_ENTRY_INFO_BITS_MAX		33
 union perf_sample_weight {
 	__u64		full;
 #if defined(__LITTLE_ENDIAN_BITFIELD)

include/uapi/linux/pkt_cls.h+2−49

@@ -99,7 +99,7 @@ enum { · 98 unmodified lines
99	* versions.	99	* versions.
100	*/	100	*/
101	#define TCA_ACT_GACT 5	101	#define TCA_ACT_GACT 5
102	#define TCA_ACT_IPT 6	102	#define TCA_ACT_IPT 6 /* obsoleted, can be reused */
103	#define TCA_ACT_PEDIT 7	103	#define TCA_ACT_PEDIT 7
104	#define TCA_ACT_MIRRED 8	104	#define TCA_ACT_MIRRED 8
105	#define TCA_ACT_NAT 9	105	#define TCA_ACT_NAT 9
@@ -120,7 +120,7 @@ enum tca_id { · 14 unmodified lines
120	TCA_ID_UNSPEC = 0,	120	TCA_ID_UNSPEC = 0,
121	TCA_ID_POLICE = 1,	121	TCA_ID_POLICE = 1,
122	TCA_ID_GACT = TCA_ACT_GACT,	122	TCA_ID_GACT = TCA_ACT_GACT,
123	TCA_ID_IPT = TCA_ACT_IPT,	123	TCA_ID_IPT = TCA_ACT_IPT, /* Obsoleted, can be reused */
124	TCA_ID_PEDIT = TCA_ACT_PEDIT,	124	TCA_ID_PEDIT = TCA_ACT_PEDIT,
125	TCA_ID_MIRRED = TCA_ACT_MIRRED,	125	TCA_ID_MIRRED = TCA_ACT_MIRRED,
126	TCA_ID_NAT = TCA_ACT_NAT,	126	TCA_ID_NAT = TCA_ACT_NAT,
@@ -280,37 +280,6 @@ struct tc_u32_pcnt { · 153 unmodified lines
280		280
281	#define TC_U32_MAXDEPTH 8	281	#define TC_U32_MAXDEPTH 8
282		282
283
284	/* RSVP filter */
285
286	enum {
287	TCA_RSVP_UNSPEC,
288	TCA_RSVP_CLASSID,
289	TCA_RSVP_DST,
290	TCA_RSVP_SRC,
291	TCA_RSVP_PINFO,
292	TCA_RSVP_POLICE,
293	TCA_RSVP_ACT,
294	__TCA_RSVP_MAX
295	};
296
297	#define TCA_RSVP_MAX (__TCA_RSVP_MAX - 1 )
298
299	struct tc_rsvp_gpi {
300	__u32 key;
301	__u32 mask;
302	int offset;
303	};
304
305	struct tc_rsvp_pinfo {
306	struct tc_rsvp_gpi dpi;
307	struct tc_rsvp_gpi spi;
308	__u8 protocol;
309	__u8 tunnelid;
310	__u8 tunnelhdr;
311	__u8 pad;
312	};
313
314	/* ROUTE filter */	283	/* ROUTE filter */
315		284
316	enum {	285	enum {
@@ -341,22 +310,6 @@ enum { · 24 unmodified lines
341		310
342	#define TCA_FW_MAX (__TCA_FW_MAX - 1)	311	#define TCA_FW_MAX (__TCA_FW_MAX - 1)
343		312
344	/* TC index filter */
345
346	enum {
347	TCA_TCINDEX_UNSPEC,
348	TCA_TCINDEX_HASH,
349	TCA_TCINDEX_MASK,
350	TCA_TCINDEX_SHIFT,
351	TCA_TCINDEX_FALL_THROUGH,
352	TCA_TCINDEX_CLASSID,
353	TCA_TCINDEX_POLICE,
354	TCA_TCINDEX_ACT,
355	__TCA_TCINDEX_MAX
356	};
357
358	#define TCA_TCINDEX_MAX (__TCA_TCINDEX_MAX - 1)
359
360	/* Flow filter */	313	/* Flow filter */
361		314
362	enum {	315	enum {

include/uapi/linux/pkt_sched.h+0−109

@@ -477,115 +477,6 @@ enum { · 476 unmodified lines
477		477
478	#define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1)	478	#define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1)
479		479
480
481	/* CBQ section */
482
483	#define TC_CBQ_MAXPRIO 8
484	#define TC_CBQ_MAXLEVEL 8
485	#define TC_CBQ_DEF_EWMA 5
486
487	struct tc_cbq_lssopt {
488	unsigned char change;
489	unsigned char flags;
490	#define TCF_CBQ_LSS_BOUNDED 1
491	#define TCF_CBQ_LSS_ISOLATED 2
492	unsigned char ewma_log;
493	unsigned char level;
494	#define TCF_CBQ_LSS_FLAGS 1
495	#define TCF_CBQ_LSS_EWMA 2
496	#define TCF_CBQ_LSS_MAXIDLE 4
497	#define TCF_CBQ_LSS_MINIDLE 8
498	#define TCF_CBQ_LSS_OFFTIME 0x10
499	#define TCF_CBQ_LSS_AVPKT 0x20
500	__u32 maxidle;
501	__u32 minidle;
502	__u32 offtime;
503	__u32 avpkt;
504	};
505
506	struct tc_cbq_wrropt {
507	unsigned char flags;
508	unsigned char priority;
509	unsigned char cpriority;
510	unsigned char __reserved;
511	__u32 allot;
512	__u32 weight;
513	};
514
515	struct tc_cbq_ovl {
516	unsigned char strategy;
517	#define TC_CBQ_OVL_CLASSIC 0
518	#define TC_CBQ_OVL_DELAY 1
519	#define TC_CBQ_OVL_LOWPRIO 2
520	#define TC_CBQ_OVL_DROP 3
521	#define TC_CBQ_OVL_RCLASSIC 4
522	unsigned char priority2;
523	__u16 pad;
524	__u32 penalty;
525	};
526
527	struct tc_cbq_police {
528	unsigned char police;
529	unsigned char __res1;
530	unsigned short __res2;
531	};
532
533	struct tc_cbq_fopt {
534	__u32 split;
535	__u32 defmap;
536	__u32 defchange;
537	};
538
539	struct tc_cbq_xstats {
540	__u32 borrows;
541	__u32 overactions;
542	__s32 avgidle;
543	__s32 undertime;
544	};
545
546	enum {
547	TCA_CBQ_UNSPEC,
548	TCA_CBQ_LSSOPT,
549	TCA_CBQ_WRROPT,
550	TCA_CBQ_FOPT,
551	TCA_CBQ_OVL_STRATEGY,
552	TCA_CBQ_RATE,
553	TCA_CBQ_RTAB,
554	TCA_CBQ_POLICE,
555	__TCA_CBQ_MAX,
556	};
557
558	#define TCA_CBQ_MAX (__TCA_CBQ_MAX - 1)
559
560	/* dsmark section */
561
562	enum {
563	TCA_DSMARK_UNSPEC,
564	TCA_DSMARK_INDICES,
565	TCA_DSMARK_DEFAULT_INDEX,
566	TCA_DSMARK_SET_TC_INDEX,
567	TCA_DSMARK_MASK,
568	TCA_DSMARK_VALUE,
569	__TCA_DSMARK_MAX,
570	};
571
572	#define TCA_DSMARK_MAX (__TCA_DSMARK_MAX - 1)
573
574	/* ATM section */
575
576	enum {
577	TCA_ATM_UNSPEC,
578	TCA_ATM_FD, /* file/socket descriptor */
579	TCA_ATM_PTR, /* pointer to descriptor - later */
580	TCA_ATM_HDR, /* LL header */
581	TCA_ATM_EXCESS, /* excess traffic class (0 for CLP) */
582	TCA_ATM_ADDR, /* PVC address (for output only) */
583	TCA_ATM_STATE, /* VC state (ATM_VS_; for output only) /
584	__TCA_ATM_MAX,
585	};
586
587	#define TCA_ATM_MAX (__TCA_ATM_MAX - 1)
588
589	/* Network emulator */	480	/* Network emulator */
590		481
591	enum {	482	enum {

include/uapi/linux/raid/md_p.h+2−6

 /*
    md_p.h : physical layout of Linux RAID devices
           Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2, or (at your option)
    any later version.
-   You should have received a copy of the GNU General Public License
-   (for example /usr/src/linux/COPYING); if not, write to the Free
-   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 #ifndef _MD_P_H
 	char	set_name[32];	/* set and interpreted by user-space */
 	__le64	ctime;		/* lo 40 bits are seconds, top 24 are microseconds or 0*/
-	__le32	level;		/* -4 (multipath), -1 (linear), 0,1,4,5 */
+	__le32	level;		/* 0,1,4,5 */
 	__le32	layout;		/* only for raid5 and raid10 currently */
 	__le64	size;		/* used size of component devices, in 512byte sectors */

include/uapi/linux/raid/md_u.h+1−10

 /*
    md_u.h : user <=> kernel API between Linux raidtools and RAID drivers
           Copyright (C) 1998 Ingo Molnar
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2, or (at your option)
    any later version.
-   You should have received a copy of the GNU General Public License
-   (for example /usr/src/linux/COPYING); if not, write to the Free
-   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 #ifndef _UAPI_MD_U_H
 } mdu_array_info_t;
-/* non-obvious values for 'level' */
-#define	LEVEL_MULTIPATH		(-4)
-#define	LEVEL_LINEAR		(-1)
-#define	LEVEL_FAULTY		(-5)
 /* we need a value for 'no level specified' and 0
  * means 'raid0', so we need something else.  This is
  * for internal use only

include/uapi/linux/resource.h+1−1

@@ -2,7 +2,7 @@ · 1 unmodified line
2	#ifndef _UAPI_LINUX_RESOURCE_H	2	#ifndef _UAPI_LINUX_RESOURCE_H
3	#define _UAPI_LINUX_RESOURCE_H	3	#define _UAPI_LINUX_RESOURCE_H
4		4
5	#include <linux/time.h>	5	#include <linux/time_types.h>
6	#include <linux/types.h>	6	#include <linux/types.h>
7		7
8	/*	8	/*

include/uapi/linux/serial.h+11−8

 #ifndef _UAPI_LINUX_SERIAL_H
 #define _UAPI_LINUX_SERIAL_H
+#include <linux/const.h>
 #include <linux/types.h>
 #include <linux/tty_flags.h>
  * * %SER_RS485_ADDRB		- Enable RS485 addressing mode.
  * * %SER_RS485_ADDR_RECV - Receive address filter (enables @addr_recv). Requires %SER_RS485_ADDRB.
  * * %SER_RS485_ADDR_DEST - Destination address (enables @addr_dest). Requires %SER_RS485_ADDRB.
+ * * %SER_RS485_MODE_RS422	- Enable RS422. Requires %SER_RS485_ENABLED.
  */
 struct serial_rs485 {
 	__u32	flags;
-#define SER_RS485_ENABLED		(1 << 0)
+#define SER_RS485_ENABLED		_BITUL(0)
-#define SER_RS485_RTS_ON_SEND		(1 << 1)
+#define SER_RS485_RTS_ON_SEND		_BITUL(1)
-#define SER_RS485_RTS_AFTER_SEND	(1 << 2)
+#define SER_RS485_RTS_AFTER_SEND	_BITUL(2)
-#define SER_RS485_RX_DURING_TX		(1 << 4)
+#define SER_RS485_RX_DURING_TX		_BITUL(3)
-#define SER_RS485_TERMINATE_BUS		(1 << 5)
+#define SER_RS485_TERMINATE_BUS		_BITUL(4)
-#define SER_RS485_ADDRB			(1 << 6)
+#define SER_RS485_ADDRB			_BITUL(5)
-#define SER_RS485_ADDR_RECV		(1 << 7)
+#define SER_RS485_ADDR_RECV		_BITUL(6)
-#define SER_RS485_ADDR_DEST		(1 << 8)
+#define SER_RS485_ADDR_DEST		_BITUL(7)
+#define SER_RS485_MODE_RS422		_BITUL(8)
 	__u32	delay_rts_before_send;
 	__u32	delay_rts_after_send;

include/uapi/linux/smc.h+2−0

 	SMC_NLA_LGR_D_CHID,		/* u16 */
 	SMC_NLA_LGR_D_PAD,		/* flag */
 	SMC_NLA_LGR_D_V2_COMMON,	/* nest */
+	SMC_NLA_LGR_D_EXT_GID,		/* u64 */
+	SMC_NLA_LGR_D_PEER_EXT_GID,	/* u64 */
 	__SMC_NLA_LGR_D_MAX,
 	SMC_NLA_LGR_D_MAX = __SMC_NLA_LGR_D_MAX - 1
 };

include/uapi/linux/smc_diag.h+2−0

@@ -107,6 +107,8 @@ struct smcd_diag_dmbinfo { /* SMC-D Socket internals */ · 106 unmodified lines
107	__aligned_u64 my_gid; /* My GID */	107	__aligned_u64 my_gid; /* My GID */
108	__aligned_u64 token; /* Token of DMB */	108	__aligned_u64 token; /* Token of DMB */
109	__aligned_u64 peer_token; /* Token of remote DMBE */	109	__aligned_u64 peer_token; /* Token of remote DMBE */
		110	__aligned_u64 peer_gid_ext; /* Peer GID (extended part) */
		111	__aligned_u64 my_gid_ext; /* My GID (extended part) */
110	};	112	};
111		113
112	#endif /* _UAPI_SMC_DIAG_H_ */	114	#endif /* _UAPI_SMC_DIAG_H_ */

include/uapi/linux/stat.h+1−0

@@ -154,6 +154,7 @@ struct statx { · 153 unmodified lines
154	#define STATX_BTIME 0x00000800U /* Want/got stx_btime */	154	#define STATX_BTIME 0x00000800U /* Want/got stx_btime */
155	#define STATX_MNT_ID 0x00001000U /* Got stx_mnt_id */	155	#define STATX_MNT_ID 0x00001000U /* Got stx_mnt_id */
156	#define STATX_DIOALIGN 0x00002000U /* Want/got direct I/O alignment info */	156	#define STATX_DIOALIGN 0x00002000U /* Want/got direct I/O alignment info */
		157	#define STATX_MNT_ID_UNIQUE 0x00004000U /* Want/got extended stx_mount_id */
157		158
158	#define STATX__RESERVED 0x80000000U /* Reserved for future struct statx expansion */	159	#define STATX__RESERVED 0x80000000U /* Reserved for future struct statx expansion */
159		160

include/uapi/linux/stddef.h+1−1

@@ -27,7 +27,7 @@ · 26 unmodified lines
27	union { \	27	union { \
28	struct { MEMBERS } ATTRS; \	28	struct { MEMBERS } ATTRS; \
29	struct TAG { MEMBERS } ATTRS NAME; \	29	struct TAG { MEMBERS } ATTRS NAME; \
30	}	30	} ATTRS
31		31
32	#ifdef __cplusplus	32	#ifdef __cplusplus
33	/* sizeof(struct{}) is 1 in C++, not 0, can't use C version of the macro. */	33	/* sizeof(struct{}) is 1 in C++, not 0, can't use C version of the macro. */

include/uapi/linux/tc_act/tc_ipt.h+0−20

@@ -1,20 +0,0 @@
1	/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2	#ifndef __LINUX_TC_IPT_H
3	#define __LINUX_TC_IPT_H
4
5	#include <linux/pkt_cls.h>
6
7	enum {
8	TCA_IPT_UNSPEC,
9	TCA_IPT_TABLE,
10	TCA_IPT_HOOK,
11	TCA_IPT_INDEX,
12	TCA_IPT_CNT,
13	TCA_IPT_TM,
14	TCA_IPT_TARG,
15	TCA_IPT_PAD,
16	__TCA_IPT_MAX
17	};
18	#define TCA_IPT_MAX (__TCA_IPT_MAX - 1)
19
20	#endif

include/uapi/linux/tc_act/tc_mirred.h+1−0

@@ -21,6 +21,7 @@ enum { · 20 unmodified lines
21	TCA_MIRRED_TM,	21	TCA_MIRRED_TM,
22	TCA_MIRRED_PARMS,	22	TCA_MIRRED_PARMS,
23	TCA_MIRRED_PAD,	23	TCA_MIRRED_PAD,
		24	TCA_MIRRED_BLOCKID,
24	__TCA_MIRRED_MAX	25	__TCA_MIRRED_MAX
25	};	26	};
26	#define TCA_MIRRED_MAX (__TCA_MIRRED_MAX - 1)	27	#define TCA_MIRRED_MAX (__TCA_MIRRED_MAX - 1)

include/uapi/linux/thp7312.h+19−0

@@ -0,0 +1,19 @@
	1	/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
	2	/*
	3	* THine THP7312 user space header file.
	4	*
	5	* Copyright (C) 2021 THine Electronics, Inc.
	6	* Copyright (C) 2023 Ideas on Board Oy
	7	*/
	8
	9	#ifndef __UAPI_THP7312_H_
	10	#define __UAPI_THP7312_H_
	11
	12	#include <linux/v4l2-controls.h>
	13
	14	#define V4L2_CID_THP7312_LOW_LIGHT_COMPENSATION (V4L2_CID_USER_THP7312_BASE + 0x01)
	15	#define V4L2_CID_THP7312_AUTO_FOCUS_METHOD (V4L2_CID_USER_THP7312_BASE + 0x02)
	16	#define V4L2_CID_THP7312_NOISE_REDUCTION_AUTO (V4L2_CID_USER_THP7312_BASE + 0x03)
	17	#define V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE (V4L2_CID_USER_THP7312_BASE + 0x04)
	18
	19	#endif /* __UAPI_THP7312_H_ */

include/uapi/linux/usb/functionfs.h+4−2

 struct usb_ext_compat_desc {
 	__u8	bFirstInterfaceNumber;
 	__u8	Reserved1;
-	__u8	CompatibleID[8];
+	__struct_group(/* no tag */, IDs, /* no attrs */,
-	__u8	SubCompatibleID[8];
+		__u8	CompatibleID[8];
+		__u8	SubCompatibleID[8];
+	);
 	__u8	Reserved2[6];
 };

include/uapi/linux/userfaultfd.h+28−1

 			   UFFD_FEATURE_WP_HUGETLBFS_SHMEM |	\
 			   UFFD_FEATURE_WP_UNPOPULATED |	\
 			   UFFD_FEATURE_POISON |		\
-			   UFFD_FEATURE_WP_ASYNC)
+			   UFFD_FEATURE_WP_ASYNC |		\
+			   UFFD_FEATURE_MOVE)
 #define UFFD_API_IOCTLS				\
 	((__u64)1 << _UFFDIO_REGISTER |		\
 	 (__u64)1 << _UFFDIO_UNREGISTER |	\
 	((__u64)1 << _UFFDIO_WAKE |		\
 	 (__u64)1 << _UFFDIO_COPY |		\
 	 (__u64)1 << _UFFDIO_ZEROPAGE |		\
+	 (__u64)1 << _UFFDIO_MOVE |		\
 	 (__u64)1 << _UFFDIO_WRITEPROTECT |	\
 	 (__u64)1 << _UFFDIO_CONTINUE |		\
 	 (__u64)1 << _UFFDIO_POISON)
 #define _UFFDIO_WAKE			(0x02)
 #define _UFFDIO_COPY			(0x03)
 #define _UFFDIO_ZEROPAGE		(0x04)
+#define _UFFDIO_MOVE			(0x05)
 #define _UFFDIO_WRITEPROTECT		(0x06)
 #define _UFFDIO_CONTINUE		(0x07)
 #define _UFFDIO_POISON			(0x08)
 				      struct uffdio_copy)
 #define UFFDIO_ZEROPAGE		_IOWR(UFFDIO, _UFFDIO_ZEROPAGE,	\
 				      struct uffdio_zeropage)
+#define UFFDIO_MOVE		_IOWR(UFFDIO, _UFFDIO_MOVE,	\
+				      struct uffdio_move)
 #define UFFDIO_WRITEPROTECT	_IOWR(UFFDIO, _UFFDIO_WRITEPROTECT, \
 				      struct uffdio_writeprotect)
 #define UFFDIO_CONTINUE		_IOWR(UFFDIO, _UFFDIO_CONTINUE,	\
 	 * asynchronous mode is supported in which the write fault is
 	 * automatically resolved and write-protection is un-set.
 	 * It implies UFFD_FEATURE_WP_UNPOPULATED.
+	 *
+	 * UFFD_FEATURE_MOVE indicates that the kernel supports moving an
+	 * existing page contents from userspace.
 	 */
 #define UFFD_FEATURE_PAGEFAULT_FLAG_WP		(1<<0)
 #define UFFD_FEATURE_EVENT_FORK			(1<<1)
 #define UFFD_FEATURE_WP_UNPOPULATED		(1<<13)
 #define UFFD_FEATURE_POISON			(1<<14)
 #define UFFD_FEATURE_WP_ASYNC			(1<<15)
+#define UFFD_FEATURE_MOVE			(1<<16)
 	__u64 features;
 	__u64 ioctls;
 	__s64 updated;
 };
+struct uffdio_move {
+	__u64 dst;
+	__u64 src;
+	__u64 len;
+	/*
+	 * Especially if used to atomically remove memory from the
+	 * address space the wake on the dst range is not needed.
+	 */
+#define UFFDIO_MOVE_MODE_DONTWAKE		((__u64)1<<0)
+#define UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES	((__u64)1<<1)
+	__u64 mode;
+	/*
+	 * "move" is written by the ioctl and must be at the end: the
+	 * copy_from_user will not read the last 8 bytes.
+	 */
+	__s64 move;
+};
 /*
  * Flags for the userfaultfd(2) system call itself.
  */

include/uapi/linux/v4l2-controls.h+6−0

  */
 #define V4L2_CID_USER_NPCM_BASE			(V4L2_CID_USER_BASE + 0x11b0)
+/*
+ * The base for THine THP7312 driver controls.
+ * We reserve 32 controls for this driver.
+ */
+#define V4L2_CID_USER_THP7312_BASE		(V4L2_CID_USER_BASE + 0x11c0)
 /* MPEG-class control IDs */
 /* The MPEG controls are applicable to all codec controls
  * and the 'MPEG' part of the define is historical */

include/uapi/linux/v4l2-subdev.h+12−3

  * @pad: pad number, as reported by the media API
  * @interval: frame interval in seconds
  * @stream: stream number, defined in subdev routing
+ * @which: interval type (from enum v4l2_subdev_format_whence)
  * @reserved: drivers and applications must zero this array
  */
 struct v4l2_subdev_frame_interval {
 	__u32 pad;
 	struct v4l2_fract interval;
 	__u32 stream;
-	__u32 reserved[8];
+	__u32 which;
+	__u32 reserved[7];
 };
 /**
  * @width: frame width in pixels
  * @height: frame height in pixels
  * @interval: frame interval in seconds
- * @which: format type (from enum v4l2_subdev_format_whence)
+ * @which: interval type (from enum v4l2_subdev_format_whence)
  * @stream: stream number, defined in subdev routing
  * @reserved: drivers and applications must zero this array
  */
  * set (which is the default), the 'stream' fields will be forced to 0 by the
  * kernel.
  */
- #define V4L2_SUBDEV_CLIENT_CAP_STREAMS		(1U << 0)
+#define V4L2_SUBDEV_CLIENT_CAP_STREAMS			(1ULL << 0)
+/*
+ * The client is aware of the struct v4l2_subdev_frame_interval which field. If
+ * this is not set (which is the default), the which field is forced to
+ * V4L2_SUBDEV_FORMAT_ACTIVE by the kernel.
+ */
+#define V4L2_SUBDEV_CLIENT_CAP_INTERVAL_USES_WHICH	(1ULL << 1)
 /**
  * struct v4l2_subdev_client_capability - Capabilities of the client accessing

include/uapi/linux/vfio.h+1−0

@@ -1219,6 +1219,7 @@ enum vfio_device_mig_state { · 1218 unmodified lines
1219	VFIO_DEVICE_STATE_RUNNING_P2P = 5,	1219	VFIO_DEVICE_STATE_RUNNING_P2P = 5,
1220	VFIO_DEVICE_STATE_PRE_COPY = 6,	1220	VFIO_DEVICE_STATE_PRE_COPY = 6,
1221	VFIO_DEVICE_STATE_PRE_COPY_P2P = 7,	1221	VFIO_DEVICE_STATE_PRE_COPY_P2P = 7,
		1222	VFIO_DEVICE_STATE_NR,
1222	};	1223	};
1223		1224
1224	/**	1225	/**

include/uapi/linux/videodev2.h+9−2

 #define V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS		(1 << 4)
 #define V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF	(1 << 5)
 #define V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS		(1 << 6)
+#define V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS		(1 << 7)
 /**
  * struct v4l2_plane - plane info for multi-planar buffers
 		__s64 __user *p_s64;
 		struct v4l2_area __user *p_area;
 		struct v4l2_ctrl_h264_sps __user *p_h264_sps;
-		struct v4l2_ctrl_h264_pps *p_h264_pps;
+		struct v4l2_ctrl_h264_pps __user *p_h264_pps;
 		struct v4l2_ctrl_h264_scaling_matrix __user *p_h264_scaling_matrix;
 		struct v4l2_ctrl_h264_pred_weights __user *p_h264_pred_weights;
 		struct v4l2_ctrl_h264_slice_params __user *p_h264_slice_params;
 		struct v4l2_ctrl_av1_tile_group_entry __user *p_av1_tile_group_entry;
 		struct v4l2_ctrl_av1_frame __user *p_av1_frame;
 		struct v4l2_ctrl_av1_film_grain __user *p_av1_film_grain;
+		struct v4l2_ctrl_hdr10_cll_info __user *p_hdr10_cll_info;
+		struct v4l2_ctrl_hdr10_mastering_display __user *p_hdr10_mastering_display;
 		void __user *ptr;
 	};
 } __attribute__ ((packed));
  * @flags:	additional buffer management attributes (ignored unless the
  *		queue has V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS capability
  *		and configured for MMAP streaming I/O).
+ * @max_num_buffers: if V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS capability flag is set
+ *		this field indicate the maximum possible number of buffers
+ *		for this queue.
  * @reserved:	future extensions
  */
 struct v4l2_create_buffers {
 	struct v4l2_format	format;
 	__u32			capabilities;
 	__u32			flags;
-	__u32			reserved[6];
+	__u32			max_num_buffers;
+	__u32			reserved[5];
 };
 /*

include/uapi/linux/virtio_config.h+7−1

  * rest are per-device feature bits.
  */
 #define VIRTIO_TRANSPORT_F_START	28
-#define VIRTIO_TRANSPORT_F_END		41
+#define VIRTIO_TRANSPORT_F_END		42
 #ifndef VIRTIO_CONFIG_NO_LEGACY
 /* Do we get callbacks when the ring is completely used, even if we've
  * This feature indicates that the driver can reset a queue individually.
  */
 #define VIRTIO_F_RING_RESET		40
+/*
+ * This feature indicates that the device support administration virtqueues.
+ */
+#define VIRTIO_F_ADMIN_VQ		41
 #endif /* _UAPI_LINUX_VIRTIO_CONFIG_H */

include/uapi/linux/virtio_pci.h+68−0

@@ -175,6 +175,9 @@ struct virtio_pci_modern_common_cfg { · 174 unmodified lines
175		175
176	__le16 queue_notify_data; /* read-write */	176	__le16 queue_notify_data; /* read-write */
177	__le16 queue_reset; /* read-write */	177	__le16 queue_reset; /* read-write */
		178
		179	__le16 admin_queue_index; /* read-only */
		180	__le16 admin_queue_num; /* read-only */
178	};	181	};
179		182
180	/* Fields in VIRTIO_PCI_CAP_PCI_CFG: */	183	/* Fields in VIRTIO_PCI_CAP_PCI_CFG: */
@@ -215,7 +218,72 @@ struct virtio_pci_cfg_cap { · 34 unmodified lines
215	#define VIRTIO_PCI_COMMON_Q_USEDHI 52	218	#define VIRTIO_PCI_COMMON_Q_USEDHI 52
216	#define VIRTIO_PCI_COMMON_Q_NDATA 56	219	#define VIRTIO_PCI_COMMON_Q_NDATA 56
217	#define VIRTIO_PCI_COMMON_Q_RESET 58	220	#define VIRTIO_PCI_COMMON_Q_RESET 58
		221	#define VIRTIO_PCI_COMMON_ADM_Q_IDX 60
		222	#define VIRTIO_PCI_COMMON_ADM_Q_NUM 62
218		223
219	#endif /* VIRTIO_PCI_NO_MODERN */	224	#endif /* VIRTIO_PCI_NO_MODERN */
220		225
		226	/* Admin command status. */
		227	#define VIRTIO_ADMIN_STATUS_OK 0
		228
		229	/* Admin command opcode. */
		230	#define VIRTIO_ADMIN_CMD_LIST_QUERY 0x0
		231	#define VIRTIO_ADMIN_CMD_LIST_USE 0x1
		232
		233	/* Admin command group type. */
		234	#define VIRTIO_ADMIN_GROUP_TYPE_SRIOV 0x1
		235
		236	/* Transitional device admin command. */
		237	#define VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE 0x2
		238	#define VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ 0x3
		239	#define VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE 0x4
		240	#define VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_READ 0x5
		241	#define VIRTIO_ADMIN_CMD_LEGACY_NOTIFY_INFO 0x6
		242
		243	struct __packed virtio_admin_cmd_hdr {
		244	__le16 opcode;
		245	/*
		246	* 1 - SR-IOV
		247	* 2-65535 - reserved
		248	*/
		249	__le16 group_type;
		250	/* Unused, reserved for future extensions. */
		251	__u8 reserved1[12];
		252	__le64 group_member_id;
		253	};
		254
		255	struct __packed virtio_admin_cmd_status {
		256	__le16 status;
		257	__le16 status_qualifier;
		258	/* Unused, reserved for future extensions. */
		259	__u8 reserved2[4];
		260	};
		261
		262	struct __packed virtio_admin_cmd_legacy_wr_data {
		263	__u8 offset; /* Starting offset of the register(s) to write. */
		264	__u8 reserved[7];
		265	__u8 registers[];
		266	};
		267
		268	struct __packed virtio_admin_cmd_legacy_rd_data {
		269	__u8 offset; /* Starting offset of the register(s) to read. */
		270	};
		271
		272	#define VIRTIO_ADMIN_CMD_NOTIFY_INFO_FLAGS_END 0
		273	#define VIRTIO_ADMIN_CMD_NOTIFY_INFO_FLAGS_OWNER_DEV 0x1
		274	#define VIRTIO_ADMIN_CMD_NOTIFY_INFO_FLAGS_OWNER_MEM 0x2
		275
		276	#define VIRTIO_ADMIN_CMD_MAX_NOTIFY_INFO 4
		277
		278	struct __packed virtio_admin_cmd_notify_info_data {
		279	__u8 flags; /* 0 = end of list, 1 = owner device, 2 = member device */
		280	__u8 bar; /* BAR of the member or the owner device */
		281	__u8 padding[6];
		282	__le64 offset; /* Offset within bar. */
		283	};
		284
		285	struct virtio_admin_cmd_notify_info_result {
		286	struct virtio_admin_cmd_notify_info_data entries[VIRTIO_ADMIN_CMD_MAX_NOTIFY_INFO];
		287	};
		288
221	#endif	289	#endif

include/uapi/linux/virtio_pmem.h+7−0

@@ -14,6 +14,13 @@ · 13 unmodified lines
14	#include <linux/virtio_ids.h>	14	#include <linux/virtio_ids.h>
15	#include <linux/virtio_config.h>	15	#include <linux/virtio_config.h>
16		16
		17	/* Feature bits */
		18	/* guest physical address range will be indicated as shared memory region 0 */
		19	#define VIRTIO_PMEM_F_SHMEM_REGION 0
		20
		21	/* shmid of the shared memory region corresponding to the pmem */
		22	#define VIRTIO_PMEM_SHMEM_REGION_ID 0
		23
17	struct virtio_pmem_config {	24	struct virtio_pmem_config {
18	__le64 start;	25	__le64 start;
19	__le64 size;	26	__le64 size;

include/uapi/rdma/bnxt_re-abi.h+41−0

@@ -54,6 +54,8 @@ enum { · 53 unmodified lines
54	BNXT_RE_UCNTX_CMASK_HAVE_MODE = 0x02ULL,	54	BNXT_RE_UCNTX_CMASK_HAVE_MODE = 0x02ULL,
55	BNXT_RE_UCNTX_CMASK_WC_DPI_ENABLED = 0x04ULL,	55	BNXT_RE_UCNTX_CMASK_WC_DPI_ENABLED = 0x04ULL,
56	BNXT_RE_UCNTX_CMASK_DBR_PACING_ENABLED = 0x08ULL,	56	BNXT_RE_UCNTX_CMASK_DBR_PACING_ENABLED = 0x08ULL,
		57	BNXT_RE_UCNTX_CMASK_POW2_DISABLED = 0x10ULL,
		58	BNXT_RE_COMP_MASK_UCNTX_HW_RETX_ENABLED = 0x40,
57	};	59	};
58		60
59	enum bnxt_re_wqe_mode {	61	enum bnxt_re_wqe_mode {
@@ -62,6 +64,14 @@ enum bnxt_re_wqe_mode { · 2 unmodified lines
62	BNXT_QPLIB_WQE_MODE_INVALID = 0x02,	64	BNXT_QPLIB_WQE_MODE_INVALID = 0x02,
63	};	65	};
64		66
		67	enum {
		68	BNXT_RE_COMP_MASK_REQ_UCNTX_POW2_SUPPORT = 0x01,
		69	};
		70
		71	struct bnxt_re_uctx_req {
		72	__aligned_u64 comp_mask;
		73	};
		74
65	struct bnxt_re_uctx_resp {	75	struct bnxt_re_uctx_resp {
66	__u32 dev_id;	76	__u32 dev_id;
67	__u32 max_qp;	77	__u32 max_qp;
@@ -92,11 +102,16 @@ struct bnxt_re_cq_req { · 24 unmodified lines
92	__aligned_u64 cq_handle;	102	__aligned_u64 cq_handle;
93	};	103	};
94		104
		105	enum bnxt_re_cq_mask {
		106	BNXT_RE_CQ_TOGGLE_PAGE_SUPPORT = 0x1,
		107	};
		108
95	struct bnxt_re_cq_resp {	109	struct bnxt_re_cq_resp {
96	__u32 cqid;	110	__u32 cqid;
97	__u32 tail;	111	__u32 tail;
98	__u32 phase;	112	__u32 phase;
99	__u32 rsvd;	113	__u32 rsvd;
		114	__aligned_u64 comp_mask;
100	};	115	};
101		116
102	struct bnxt_re_resize_cq_req {	117	struct bnxt_re_resize_cq_req {
@@ -133,6 +148,7 @@ enum bnxt_re_shpg_offt { · 30 unmodified lines
133	enum bnxt_re_objects {	148	enum bnxt_re_objects {
134	BNXT_RE_OBJECT_ALLOC_PAGE = (1U << UVERBS_ID_NS_SHIFT),	149	BNXT_RE_OBJECT_ALLOC_PAGE = (1U << UVERBS_ID_NS_SHIFT),
135	BNXT_RE_OBJECT_NOTIFY_DRV,	150	BNXT_RE_OBJECT_NOTIFY_DRV,
		151	BNXT_RE_OBJECT_GET_TOGGLE_MEM,
136	};	152	};
137		153
138	enum bnxt_re_alloc_page_type {	154	enum bnxt_re_alloc_page_type {
@@ -161,4 +177,29 @@ enum bnxt_re_alloc_page_methods { · 22 unmodified lines
161	enum bnxt_re_notify_drv_methods {	177	enum bnxt_re_notify_drv_methods {
162	BNXT_RE_METHOD_NOTIFY_DRV = (1U << UVERBS_ID_NS_SHIFT),	178	BNXT_RE_METHOD_NOTIFY_DRV = (1U << UVERBS_ID_NS_SHIFT),
163	};	179	};
		180
		181	/* Toggle mem */
		182
		183	enum bnxt_re_get_toggle_mem_type {
		184	BNXT_RE_CQ_TOGGLE_MEM = 0,
		185	BNXT_RE_SRQ_TOGGLE_MEM,
		186	};
		187
		188	enum bnxt_re_var_toggle_mem_attrs {
		189	BNXT_RE_TOGGLE_MEM_HANDLE = (1U << UVERBS_ID_NS_SHIFT),
		190	BNXT_RE_TOGGLE_MEM_TYPE,
		191	BNXT_RE_TOGGLE_MEM_RES_ID,
		192	BNXT_RE_TOGGLE_MEM_MMAP_PAGE,
		193	BNXT_RE_TOGGLE_MEM_MMAP_OFFSET,
		194	BNXT_RE_TOGGLE_MEM_MMAP_LENGTH,
		195	};
		196
		197	enum bnxt_re_toggle_mem_attrs {
		198	BNXT_RE_RELEASE_TOGGLE_MEM_HANDLE = (1U << UVERBS_ID_NS_SHIFT),
		199	};
		200
		201	enum bnxt_re_toggle_mem_methods {
		202	BNXT_RE_METHOD_GET_TOGGLE_MEM = (1U << UVERBS_ID_NS_SHIFT),
		203	BNXT_RE_METHOD_RELEASE_TOGGLE_MEM,
		204	};
164	#endif /* __BNXT_RE_UVERBS_ABI_H__*/	205	#endif /* __BNXT_RE_UVERBS_ABI_H__*/

include/uapi/rdma/efa-abi.h+20−1

@@ -1,12 +1,13 @@
1	/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) */	1	/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) */
2	/*	2	/*
3	* Copyright 2018-2023 Amazon.com, Inc. or its affiliates. All rights reserved.	3	* Copyright 2018-2024 Amazon.com, Inc. or its affiliates. All rights reserved.
4	*/	4	*/
5		5
6	#ifndef EFA_ABI_USER_H	6	#ifndef EFA_ABI_USER_H
7	#define EFA_ABI_USER_H	7	#define EFA_ABI_USER_H
8		8
9	#include <linux/types.h>	9	#include <linux/types.h>
		10	#include <rdma/ib_user_ioctl_cmds.h>
10		11
11	/*	12	/*
12	* Increment this value if any changes that break userspace ABI	13	* Increment this value if any changes that break userspace ABI
@@ -134,4 +135,22 @@ struct efa_ibv_ex_query_device_resp { · 121 unmodified lines
134	__u32 device_caps;	135	__u32 device_caps;
135	};	136	};
136		137
		138	enum {
		139	EFA_QUERY_MR_VALIDITY_RECV_IC_ID = 1 << 0,
		140	EFA_QUERY_MR_VALIDITY_RDMA_READ_IC_ID = 1 << 1,
		141	EFA_QUERY_MR_VALIDITY_RDMA_RECV_IC_ID = 1 << 2,
		142	};
		143
		144	enum efa_query_mr_attrs {
		145	EFA_IB_ATTR_QUERY_MR_HANDLE = (1U << UVERBS_ID_NS_SHIFT),
		146	EFA_IB_ATTR_QUERY_MR_RESP_IC_ID_VALIDITY,
		147	EFA_IB_ATTR_QUERY_MR_RESP_RECV_IC_ID,
		148	EFA_IB_ATTR_QUERY_MR_RESP_RDMA_READ_IC_ID,
		149	EFA_IB_ATTR_QUERY_MR_RESP_RDMA_RECV_IC_ID,
		150	};
		151
		152	enum efa_mr_methods {
		153	EFA_IB_METHOD_MR_QUERY = (1U << UVERBS_ID_NS_SHIFT),
		154	};
		155
137	#endif /* EFA_ABI_USER_H */	156	#endif /* EFA_ABI_USER_H */

include/uapi/rdma/hns-abi.h+5−0

@@ -125,4 +125,9 @@ struct hns_roce_ib_alloc_pd_resp { · 124 unmodified lines
125	__u32 pdn;	125	__u32 pdn;
126	};	126	};
127		127
		128	struct hns_roce_ib_create_ah_resp {
		129	__u8 dmac[6];
		130	__u8 reserved[2];
		131	};
		132
128	#endif /* HNS_ABI_USER_H */	133	#endif /* HNS_ABI_USER_H */

include/uapi/rdma/mlx5-abi.h+2−0

 #include <linux/types.h>
 #include <linux/if_ether.h>	/* For ETH_ALEN. */
 #include <rdma/ib_user_ioctl_verbs.h>
+#include <rdma/mlx5_user_ioctl_verbs.h>
 enum {
 	MLX5_QP_FLAG_SIGNATURE		= 1 << 0,
 	__u32	tunnel_offloads_caps; /* enum mlx5_ib_tunnel_offloads */
 	struct  mlx5_ib_dci_streams_caps dci_streams_caps;
 	__u16 reserved;
+	struct mlx5_ib_uapi_reg reg_c0;
 };
 enum mlx5_ib_create_cq_flags {

include/uapi/rdma/mlx5_user_ioctl_verbs.h+1−0

@@ -64,6 +64,7 @@ enum mlx5_ib_uapi_dm_type { · 63 unmodified lines
64	MLX5_IB_UAPI_DM_TYPE_STEERING_SW_ICM,	64	MLX5_IB_UAPI_DM_TYPE_STEERING_SW_ICM,
65	MLX5_IB_UAPI_DM_TYPE_HEADER_MODIFY_SW_ICM,	65	MLX5_IB_UAPI_DM_TYPE_HEADER_MODIFY_SW_ICM,
66	MLX5_IB_UAPI_DM_TYPE_HEADER_MODIFY_PATTERN_SW_ICM,	66	MLX5_IB_UAPI_DM_TYPE_HEADER_MODIFY_PATTERN_SW_ICM,
		67	MLX5_IB_UAPI_DM_TYPE_ENCAP_SW_ICM,
67	};	68	};
68		69
69	enum mlx5_ib_uapi_devx_create_event_channel_flags {	70	enum mlx5_ib_uapi_devx_create_event_channel_flags {

include/uapi/regulator/regulator.h+90−0

@@ -0,0 +1,90 @@
	1	/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
	2	/*
	3	* Regulator uapi header
	4	*
	5	* Author: Naresh Solanki <Naresh.Solanki@9elements.com>
	6	*/
	7
	8	#ifndef _UAPI_REGULATOR_H
	9	#define _UAPI_REGULATOR_H
	10
	11	#ifdef __KERNEL__
	12	#include <linux/types.h>
	13	#else
	14	#include <stdint.h>
	15	#endif
	16
	17	/*
	18	* Regulator notifier events.
	19	*
	20	* UNDER_VOLTAGE Regulator output is under voltage.
	21	* OVER_CURRENT Regulator output current is too high.
	22	* REGULATION_OUT Regulator output is out of regulation.
	23	* FAIL Regulator output has failed.
	24	* OVER_TEMP Regulator over temp.
	25	* FORCE_DISABLE Regulator forcibly shut down by software.
	26	* VOLTAGE_CHANGE Regulator voltage changed.
	27	* Data passed is old voltage cast to (void *).
	28	* DISABLE Regulator was disabled.
	29	* PRE_VOLTAGE_CHANGE Regulator is about to have voltage changed.
	30	* Data passed is "struct pre_voltage_change_data"
	31	* ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason.
	32	* Data passed is old voltage cast to (void *).
	33	* PRE_DISABLE Regulator is about to be disabled
	34	* ABORT_DISABLE Regulator disable failed for some reason
	35	*
	36	* NOTE: These events can be OR'ed together when passed into handler.
	37	*/
	38
	39	#define REGULATOR_EVENT_UNDER_VOLTAGE 0x01
	40	#define REGULATOR_EVENT_OVER_CURRENT 0x02
	41	#define REGULATOR_EVENT_REGULATION_OUT 0x04
	42	#define REGULATOR_EVENT_FAIL 0x08
	43	#define REGULATOR_EVENT_OVER_TEMP 0x10
	44	#define REGULATOR_EVENT_FORCE_DISABLE 0x20
	45	#define REGULATOR_EVENT_VOLTAGE_CHANGE 0x40
	46	#define REGULATOR_EVENT_DISABLE 0x80
	47	#define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE 0x100
	48	#define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE 0x200
	49	#define REGULATOR_EVENT_PRE_DISABLE 0x400
	50	#define REGULATOR_EVENT_ABORT_DISABLE 0x800
	51	#define REGULATOR_EVENT_ENABLE 0x1000
	52	/*
	53	* Following notifications should be emitted only if detected condition
	54	* is such that the HW is likely to still be working but consumers should
	55	* take a recovery action to prevent problems escalating into errors.
	56	*/
	57	#define REGULATOR_EVENT_UNDER_VOLTAGE_WARN 0x2000
	58	#define REGULATOR_EVENT_OVER_CURRENT_WARN 0x4000
	59	#define REGULATOR_EVENT_OVER_VOLTAGE_WARN 0x8000
	60	#define REGULATOR_EVENT_OVER_TEMP_WARN 0x10000
	61	#define REGULATOR_EVENT_WARN_MASK 0x1E000
	62
	63	struct reg_genl_event {
	64	char reg_name[32];
	65	uint64_t event;
	66	};
	67
	68	/* attributes of reg_genl_family */
	69	enum {
	70	REG_GENL_ATTR_UNSPEC,
	71	REG_GENL_ATTR_EVENT, /* reg event info needed by user space */
	72	__REG_GENL_ATTR_MAX,
	73	};
	74
	75	#define REG_GENL_ATTR_MAX (__REG_GENL_ATTR_MAX - 1)
	76
	77	/* commands supported by the reg_genl_family */
	78	enum {
	79	REG_GENL_CMD_UNSPEC,
	80	REG_GENL_CMD_EVENT, /* kernel->user notifications for reg events */
	81	__REG_GENL_CMD_MAX,
	82	};
	83
	84	#define REG_GENL_CMD_MAX (__REG_GENL_CMD_MAX - 1)
	85
	86	#define REG_GENL_FAMILY_NAME "reg_event"
	87	#define REG_GENL_VERSION 0x01
	88	#define REG_GENL_MCAST_GROUP_NAME "reg_mc_group"
	89
	90	#endif /* _UAPI_REGULATOR_H */

include/uapi/scsi/scsi_bsg_mpi3mr.h+2−0

@@ -491,6 +491,8 @@ struct mpi3_nvme_encapsulated_error_reply { · 490 unmodified lines
491	#define MPI3MR_NVME_DATA_FORMAT_PRP 0	491	#define MPI3MR_NVME_DATA_FORMAT_PRP 0
492	#define MPI3MR_NVME_DATA_FORMAT_SGL1 1	492	#define MPI3MR_NVME_DATA_FORMAT_SGL1 1
493	#define MPI3MR_NVME_DATA_FORMAT_SGL2 2	493	#define MPI3MR_NVME_DATA_FORMAT_SGL2 2
		494	#define MPI3MR_NVMESGL_DATA_SEGMENT 0x00
		495	#define MPI3MR_NVMESGL_LAST_SEGMENT 0x03
494		496
495	/* MPI3: task management related definitions */	497	/* MPI3: task management related definitions */
496	struct mpi3_scsi_task_mgmt_request {	498	struct mpi3_scsi_task_mgmt_request {

include/uapi/sound/asound.h+5−2

  *                                                                           *
  *****************************************************************************/
-#define SNDRV_PCM_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 15)
+#define SNDRV_PCM_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 16)
 typedef unsigned long snd_pcm_uframes_t;
 typedef signed long snd_pcm_sframes_t;
 typedef int __bitwise snd_pcm_subformat_t;
 #define	SNDRV_PCM_SUBFORMAT_STD		((__force snd_pcm_subformat_t) 0)
-#define	SNDRV_PCM_SUBFORMAT_LAST	SNDRV_PCM_SUBFORMAT_STD
+#define	SNDRV_PCM_SUBFORMAT_MSBITS_MAX	((__force snd_pcm_subformat_t) 1)
+#define	SNDRV_PCM_SUBFORMAT_MSBITS_20	((__force snd_pcm_subformat_t) 2)
+#define	SNDRV_PCM_SUBFORMAT_MSBITS_24	((__force snd_pcm_subformat_t) 3)
+#define	SNDRV_PCM_SUBFORMAT_LAST	SNDRV_PCM_SUBFORMAT_MSBITS_24
 #define SNDRV_PCM_INFO_MMAP		0x00000001	/* hardware supports mmap */
 #define SNDRV_PCM_INFO_MMAP_VALID	0x00000002	/* period data are valid during transfer */

include/uapi/sound/scarlett2.h+54−0

@@ -0,0 +1,54 @@
	1	/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
	2	/*
	3	* Focusrite Scarlett 2 Protocol Driver for ALSA
	4	* (including Scarlett 2nd Gen, 3rd Gen, 4th Gen, Clarett USB, and
	5	* Clarett+ series products)
	6	*
	7	* Copyright (c) 2023 by Geoffrey D. Bennett <g at b4.vu>
	8	*/
	9	#ifndef __UAPI_SOUND_SCARLETT2_H
	10	#define __UAPI_SOUND_SCARLETT2_H
	11
	12	#include <linux/types.h>
	13	#include <linux/ioctl.h>
	14
	15	#define SCARLETT2_HWDEP_MAJOR 1
	16	#define SCARLETT2_HWDEP_MINOR 0
	17	#define SCARLETT2_HWDEP_SUBMINOR 0
	18
	19	#define SCARLETT2_HWDEP_VERSION \
	20	((SCARLETT2_HWDEP_MAJOR << 16) \| \
	21	(SCARLETT2_HWDEP_MINOR << 8) \| \
	22	SCARLETT2_HWDEP_SUBMINOR)
	23
	24	#define SCARLETT2_HWDEP_VERSION_MAJOR(v) (((v) >> 16) & 0xFF)
	25	#define SCARLETT2_HWDEP_VERSION_MINOR(v) (((v) >> 8) & 0xFF)
	26	#define SCARLETT2_HWDEP_VERSION_SUBMINOR(v) ((v) & 0xFF)
	27
	28	/* Get protocol version */
	29	#define SCARLETT2_IOCTL_PVERSION _IOR('S', 0x60, int)
	30
	31	/* Reboot */
	32	#define SCARLETT2_IOCTL_REBOOT _IO('S', 0x61)
	33
	34	/* Select flash segment */
	35	#define SCARLETT2_SEGMENT_ID_SETTINGS 0
	36	#define SCARLETT2_SEGMENT_ID_FIRMWARE 1
	37	#define SCARLETT2_SEGMENT_ID_COUNT 2
	38
	39	#define SCARLETT2_IOCTL_SELECT_FLASH_SEGMENT _IOW('S', 0x62, int)
	40
	41	/* Erase selected flash segment */
	42	#define SCARLETT2_IOCTL_ERASE_FLASH_SEGMENT _IO('S', 0x63)
	43
	44	/* Get selected flash segment erase progress
	45	* 1 through to num_blocks, or 255 for complete
	46	*/
	47	struct scarlett2_flash_segment_erase_progress {
	48	unsigned char progress;
	49	unsigned char num_blocks;
	50	};
	51	#define SCARLETT2_IOCTL_GET_ERASE_PROGRESS \
	52	_IOR('S', 0x64, struct scarlett2_flash_segment_erase_progress)
	53
	54	#endif /* __UAPI_SOUND_SCARLETT2_H */

include/uapi/sound/sof/tokens.h+5−0

 /* buffers */
 #define SOF_TKN_BUF_SIZE			100
 #define SOF_TKN_BUF_CAPS			101
+#define SOF_TKN_BUF_FLAGS			102
 /* DAI */
 /* Token retired with ABI 3.2, do not use for new capabilities
 #define SOF_TKN_AMD_ACPI2S_CH			1701
 #define SOF_TKN_AMD_ACPI2S_TDM_MODE		1702
+/* MICFIL PDM */
+#define SOF_TKN_IMX_MICFIL_RATE			2000
+#define SOF_TKN_IMX_MICFIL_CH			2001
 #endif

Merge drm/drm-next into drm-xe-next

Keyboard shortcuts

General

Issues and pull requests

Issues, pull requests and Inbox

Repository code

@@ -54,7 +54,7 @@ extern "C" { · 53 unmodified lines
54	* Format modifiers may change any property of the buffer, including the number	54	* Format modifiers may change any property of the buffer, including the number
55	* of planes and/or the required allocation size. Format modifiers are	55	* of planes and/or the required allocation size. Format modifiers are
56	* vendor-namespaced, and as such the relationship between a fourcc code and a	56	* vendor-namespaced, and as such the relationship between a fourcc code and a
57	* modifier is specific to the modifer being used. For example, some modifiers	57	* modifier is specific to the modifier being used. For example, some modifiers
58	* may preserve meaning - such as number of planes - from the fourcc code,	58	* may preserve meaning - such as number of planes - from the fourcc code,
59	* whereas others may not.	59	* whereas others may not.
60	*	60	*
@@ -79,7 +79,7 @@ extern "C" { · 18 unmodified lines
79	* format.	79	* format.
80	* - Higher-level programs interfacing with KMS/GBM/EGL/Vulkan/etc: these users	80	* - Higher-level programs interfacing with KMS/GBM/EGL/Vulkan/etc: these users
81	* see modifiers as opaque tokens they can check for equality and intersect.	81	* see modifiers as opaque tokens they can check for equality and intersect.
82	* These users musn't need to know to reason about the modifier value	82	* These users mustn't need to know to reason about the modifier value
83	* (i.e. they are not expected to extract information out of the modifier).	83	* (i.e. they are not expected to extract information out of the modifier).
84	*	84	*
85	* Vendors should document their modifier usage in as much detail as	85	* Vendors should document their modifier usage in as much detail as
@@ -540,7 +540,7 @@ extern "C" { · 454 unmodified lines
540	* This is a tiled layout using 4Kb tiles in row-major layout.	540	* This is a tiled layout using 4Kb tiles in row-major layout.
541	* Within the tile pixels are laid out in 16 256 byte units / sub-tiles which	541	* Within the tile pixels are laid out in 16 256 byte units / sub-tiles which
542	* are arranged in four groups (two wide, two high) with column-major layout.	542	* are arranged in four groups (two wide, two high) with column-major layout.
543	* Each group therefore consits out of four 256 byte units, which are also laid	543	* Each group therefore consists out of four 256 byte units, which are also laid
544	* out as 2x2 column-major.	544	* out as 2x2 column-major.
545	* 256 byte units are made out of four 64 byte blocks of pixels, producing	545	* 256 byte units are made out of four 64 byte blocks of pixels, producing
546	* either a square block or a 2:1 unit.	546	* either a square block or a 2:1 unit.
@@ -1103,7 +1103,7 @@ drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier) · 556 unmodified lines
1103	*/	1103	*/
1104		1104
1105	/*	1105	/*
1106	* The top 4 bits (out of the 56 bits alloted for specifying vendor specific	1106	* The top 4 bits (out of the 56 bits allotted for specifying vendor specific
1107	* modifiers) denote the category for modifiers. Currently we have three	1107	* modifiers) denote the category for modifiers. Currently we have three
1108	* categories of modifiers ie AFBC, MISC and AFRC. We can have a maximum of	1108	* categories of modifiers ie AFBC, MISC and AFRC. We can have a maximum of
1109	* sixteen different categories.	1109	* sixteen different categories.
@@ -1419,7 +1419,7 @@ drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier) · 309 unmodified lines
1419	* Amlogic FBC Memory Saving mode	1419	* Amlogic FBC Memory Saving mode
1420	*	1420	*
1421	* Indicates the storage is packed when pixel size is multiple of word	1421	* Indicates the storage is packed when pixel size is multiple of word
1422	* boudaries, i.e. 8bit should be stored in this mode to save allocation	1422	* boundaries, i.e. 8bit should be stored in this mode to save allocation
1423	* memory.	1423	* memory.
1424	*	1424	*
1425	* This mode reduces body layout to 3072 bytes per 64x32 superblock with	1425	* This mode reduces body layout to 3072 bytes per 64x32 superblock with