| @@ -1,1695 +0,0 @@ |
| 1 | // SPDX-License-Identifier: GPL-2.0-only | | |
| 2 | /* | | |
| 3 | * Copyright (C) 2008 | | |
| 4 | * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> | | |
| 5 | * | | |
| 6 | * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. | | |
| 7 | */ | | |
| 8 | | | |
| 9 | #include <linux/module.h> | | |
| 10 | #include <linux/kernel.h> | | |
| 11 | #include <linux/platform_device.h> | | |
| 12 | #include <linux/sched.h> | | |
| 13 | #include <linux/errno.h> | | |
| 14 | #include <linux/string.h> | | |
| 15 | #include <linux/interrupt.h> | | |
| 16 | #include <linux/slab.h> | | |
| 17 | #include <linux/fb.h> | | |
| 18 | #include <linux/delay.h> | | |
| 19 | #include <linux/init.h> | | |
| 20 | #include <linux/ioport.h> | | |
| 21 | #include <linux/dma-mapping.h> | | |
| 22 | #include <linux/dmaengine.h> | | |
| 23 | #include <linux/console.h> | | |
| 24 | #include <linux/clk.h> | | |
| 25 | #include <linux/mutex.h> | | |
| 26 | #include <linux/dma/ipu-dma.h> | | |
| 27 | #include <linux/backlight.h> | | |
| 28 | | | |
| 29 | #include <linux/dma/imx-dma.h> | | |
| 30 | #include <linux/platform_data/video-mx3fb.h> | | |
| 31 | | | |
| 32 | #include <asm/io.h> | | |
| 33 | #include <linux/uaccess.h> | | |
| 34 | | | |
| 35 | #define MX3FB_NAME "mx3_sdc_fb" | | |
| 36 | | | |
| 37 | #define MX3FB_REG_OFFSET 0xB4 | | |
| 38 | | | |
| 39 | /* SDC Registers */ | | |
| 40 | #define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET) | | |
| 41 | #define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET) | | |
| 42 | #define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET) | | |
| 43 | #define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET) | | |
| 44 | #define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET) | | |
| 45 | #define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET) | | |
| 46 | #define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET) | | |
| 47 | #define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET) | | |
| 48 | #define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET) | | |
| 49 | #define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET) | | |
| 50 | #define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET) | | |
| 51 | | | |
| 52 | /* Register bits */ | | |
| 53 | #define SDC_COM_TFT_COLOR 0x00000001UL | | |
| 54 | #define SDC_COM_FG_EN 0x00000010UL | | |
| 55 | #define SDC_COM_GWSEL 0x00000020UL | | |
| 56 | #define SDC_COM_GLB_A 0x00000040UL | | |
| 57 | #define SDC_COM_KEY_COLOR_G 0x00000080UL | | |
| 58 | #define SDC_COM_BG_EN 0x00000200UL | | |
| 59 | #define SDC_COM_SHARP 0x00001000UL | | |
| 60 | | | |
| 61 | #define SDC_V_SYNC_WIDTH_L 0x00000001UL | | |
| 62 | | | |
| 63 | /* Display Interface registers */ | | |
| 64 | #define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET) | | |
| 65 | #define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET) | | |
| 66 | #define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET) | | |
| 67 | #define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET) | | |
| 68 | #define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET) | | |
| 69 | #define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET) | | |
| 70 | #define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET) | | |
| 71 | #define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET) | | |
| 72 | #define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET) | | |
| 73 | #define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET) | | |
| 74 | #define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET) | | |
| 75 | #define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET) | | |
| 76 | #define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET) | | |
| 77 | #define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET) | | |
| 78 | #define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET) | | |
| 79 | #define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET) | | |
| 80 | #define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET) | | |
| 81 | #define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET) | | |
| 82 | #define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET) | | |
| 83 | #define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET) | | |
| 84 | #define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET) | | |
| 85 | #define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET) | | |
| 86 | #define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET) | | |
| 87 | #define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET) | | |
| 88 | #define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET) | | |
| 89 | #define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET) | | |
| 90 | #define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET) | | |
| 91 | #define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET) | | |
| 92 | #define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET) | | |
| 93 | #define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET) | | |
| 94 | #define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET) | | |
| 95 | #define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET) | | |
| 96 | #define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET) | | |
| 97 | #define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET) | | |
| 98 | #define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET) | | |
| 99 | #define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET) | | |
| 100 | #define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET) | | |
| 101 | #define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET) | | |
| 102 | #define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET) | | |
| 103 | | | |
| 104 | /* DI_DISP_SIG_POL bits */ | | |
| 105 | #define DI_D3_VSYNC_POL_SHIFT 28 | | |
| 106 | #define DI_D3_HSYNC_POL_SHIFT 27 | | |
| 107 | #define DI_D3_DRDY_SHARP_POL_SHIFT 26 | | |
| 108 | #define DI_D3_CLK_POL_SHIFT 25 | | |
| 109 | #define DI_D3_DATA_POL_SHIFT 24 | | |
| 110 | | | |
| 111 | /* DI_DISP_IF_CONF bits */ | | |
| 112 | #define DI_D3_CLK_IDLE_SHIFT 26 | | |
| 113 | #define DI_D3_CLK_SEL_SHIFT 25 | | |
| 114 | #define DI_D3_DATAMSK_SHIFT 24 | | |
| 115 | | | |
| 116 | enum ipu_panel { | | |
| 117 | IPU_PANEL_SHARP_TFT, | | |
| 118 | IPU_PANEL_TFT, | | |
| 119 | }; | | |
| 120 | | | |
| 121 | struct ipu_di_signal_cfg { | | |
| 122 | unsigned datamask_en:1; | | |
| 123 | unsigned clksel_en:1; | | |
| 124 | unsigned clkidle_en:1; | | |
| 125 | unsigned data_pol:1; /* true = inverted */ | | |
| 126 | unsigned clk_pol:1; /* true = rising edge */ | | |
| 127 | unsigned enable_pol:1; | | |
| 128 | unsigned Hsync_pol:1; /* true = active high */ | | |
| 129 | unsigned Vsync_pol:1; | | |
| 130 | }; | | |
| 131 | | | |
| 132 | static const struct fb_videomode mx3fb_modedb[] = { | | |
| 133 | { | | |
| 134 | /* 240x320 @ 60 Hz */ | | |
| 135 | .name = "Sharp-QVGA", | | |
| 136 | .refresh = 60, | | |
| 137 | .xres = 240, | | |
| 138 | .yres = 320, | | |
| 139 | .pixclock = 185925, | | |
| 140 | .left_margin = 9, | | |
| 141 | .right_margin = 16, | | |
| 142 | .upper_margin = 7, | | |
| 143 | .lower_margin = 9, | | |
| 144 | .hsync_len = 1, | | |
| 145 | .vsync_len = 1, | | |
| 146 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | | | |
| 147 | FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | | | |
| 148 | FB_SYNC_CLK_IDLE_EN, | | |
| 149 | .vmode = FB_VMODE_NONINTERLACED, | | |
| 150 | .flag = 0, | | |
| 151 | }, { | | |
| 152 | /* 240x33 @ 60 Hz */ | | |
| 153 | .name = "Sharp-CLI", | | |
| 154 | .refresh = 60, | | |
| 155 | .xres = 240, | | |
| 156 | .yres = 33, | | |
| 157 | .pixclock = 185925, | | |
| 158 | .left_margin = 9, | | |
| 159 | .right_margin = 16, | | |
| 160 | .upper_margin = 7, | | |
| 161 | .lower_margin = 9 + 287, | | |
| 162 | .hsync_len = 1, | | |
| 163 | .vsync_len = 1, | | |
| 164 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | | | |
| 165 | FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | | | |
| 166 | FB_SYNC_CLK_IDLE_EN, | | |
| 167 | .vmode = FB_VMODE_NONINTERLACED, | | |
| 168 | .flag = 0, | | |
| 169 | }, { | | |
| 170 | /* 640x480 @ 60 Hz */ | | |
| 171 | .name = "NEC-VGA", | | |
| 172 | .refresh = 60, | | |
| 173 | .xres = 640, | | |
| 174 | .yres = 480, | | |
| 175 | .pixclock = 38255, | | |
| 176 | .left_margin = 144, | | |
| 177 | .right_margin = 0, | | |
| 178 | .upper_margin = 34, | | |
| 179 | .lower_margin = 40, | | |
| 180 | .hsync_len = 1, | | |
| 181 | .vsync_len = 1, | | |
| 182 | .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, | | |
| 183 | .vmode = FB_VMODE_NONINTERLACED, | | |
| 184 | .flag = 0, | | |
| 185 | }, { | | |
| 186 | /* NTSC TV output */ | | |
| 187 | .name = "TV-NTSC", | | |
| 188 | .refresh = 60, | | |
| 189 | .xres = 640, | | |
| 190 | .yres = 480, | | |
| 191 | .pixclock = 37538, | | |
| 192 | .left_margin = 38, | | |
| 193 | .right_margin = 858 - 640 - 38 - 3, | | |
| 194 | .upper_margin = 36, | | |
| 195 | .lower_margin = 518 - 480 - 36 - 1, | | |
| 196 | .hsync_len = 3, | | |
| 197 | .vsync_len = 1, | | |
| 198 | .sync = 0, | | |
| 199 | .vmode = FB_VMODE_NONINTERLACED, | | |
| 200 | .flag = 0, | | |
| 201 | }, { | | |
| 202 | /* PAL TV output */ | | |
| 203 | .name = "TV-PAL", | | |
| 204 | .refresh = 50, | | |
| 205 | .xres = 640, | | |
| 206 | .yres = 480, | | |
| 207 | .pixclock = 37538, | | |
| 208 | .left_margin = 38, | | |
| 209 | .right_margin = 960 - 640 - 38 - 32, | | |
| 210 | .upper_margin = 32, | | |
| 211 | .lower_margin = 555 - 480 - 32 - 3, | | |
| 212 | .hsync_len = 32, | | |
| 213 | .vsync_len = 3, | | |
| 214 | .sync = 0, | | |
| 215 | .vmode = FB_VMODE_NONINTERLACED, | | |
| 216 | .flag = 0, | | |
| 217 | }, { | | |
| 218 | /* TV output VGA mode, 640x480 @ 65 Hz */ | | |
| 219 | .name = "TV-VGA", | | |
| 220 | .refresh = 60, | | |
| 221 | .xres = 640, | | |
| 222 | .yres = 480, | | |
| 223 | .pixclock = 40574, | | |
| 224 | .left_margin = 35, | | |
| 225 | .right_margin = 45, | | |
| 226 | .upper_margin = 9, | | |
| 227 | .lower_margin = 1, | | |
| 228 | .hsync_len = 46, | | |
| 229 | .vsync_len = 5, | | |
| 230 | .sync = 0, | | |
| 231 | .vmode = FB_VMODE_NONINTERLACED, | | |
| 232 | .flag = 0, | | |
| 233 | }, | | |
| 234 | }; | | |
| 235 | | | |
| 236 | struct mx3fb_data { | | |
| 237 | struct fb_info *fbi; | | |
| 238 | int backlight_level; | | |
| 239 | void __iomem *reg_base; | | |
| 240 | spinlock_t lock; | | |
| 241 | struct device *dev; | | |
| 242 | struct backlight_device *bl; | | |
| 243 | | | |
| 244 | uint32_t h_start_width; | | |
| 245 | uint32_t v_start_width; | | |
| 246 | enum disp_data_mapping disp_data_fmt; | | |
| 247 | }; | | |
| 248 | | | |
| 249 | struct dma_chan_request { | | |
| 250 | struct mx3fb_data *mx3fb; | | |
| 251 | enum ipu_channel id; | | |
| 252 | }; | | |
| 253 | | | |
| 254 | /* MX3 specific framebuffer information. */ | | |
| 255 | struct mx3fb_info { | | |
| 256 | int blank; | | |
| 257 | enum ipu_channel ipu_ch; | | |
| 258 | uint32_t cur_ipu_buf; | | |
| 259 | | | |
| 260 | u32 pseudo_palette[16]; | | |
| 261 | | | |
| 262 | struct completion flip_cmpl; | | |
| 263 | struct mutex mutex; /* Protects fb-ops */ | | |
| 264 | struct mx3fb_data *mx3fb; | | |
| 265 | struct idmac_channel *idmac_channel; | | |
| 266 | struct dma_async_tx_descriptor *txd; | | |
| 267 | dma_cookie_t cookie; | | |
| 268 | struct scatterlist sg[2]; | | |
| 269 | | | |
| 270 | struct fb_var_screeninfo cur_var; /* current var info */ | | |
| 271 | }; | | |
| 272 | | | |
| 273 | static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value); | | |
| 274 | static u32 sdc_get_brightness(struct mx3fb_data *mx3fb); | | |
| 275 | | | |
| 276 | static int mx3fb_bl_get_brightness(struct backlight_device *bl) | | |
| 277 | { | | |
| 278 | struct mx3fb_data *fbd = bl_get_data(bl); | | |
| 279 | | | |
| 280 | return sdc_get_brightness(fbd); | | |
| 281 | } | | |
| 282 | | | |
| 283 | static int mx3fb_bl_update_status(struct backlight_device *bl) | | |
| 284 | { | | |
| 285 | struct mx3fb_data *fbd = bl_get_data(bl); | | |
| 286 | int brightness = backlight_get_brightness(bl); | | |
| 287 | | | |
| 288 | fbd->backlight_level = (fbd->backlight_level & ~0xFF) | brightness; | | |
| 289 | | | |
| 290 | sdc_set_brightness(fbd, fbd->backlight_level); | | |
| 291 | | | |
| 292 | return 0; | | |
| 293 | } | | |
| 294 | | | |
| 295 | static const struct backlight_ops mx3fb_lcdc_bl_ops = { | | |
| 296 | .update_status = mx3fb_bl_update_status, | | |
| 297 | .get_brightness = mx3fb_bl_get_brightness, | | |
| 298 | }; | | |
| 299 | | | |
| 300 | static void mx3fb_init_backlight(struct mx3fb_data *fbd) | | |
| 301 | { | | |
| 302 | struct backlight_properties props; | | |
| 303 | struct backlight_device *bl; | | |
| 304 | | | |
| 305 | if (fbd->bl) | | |
| 306 | return; | | |
| 307 | | | |
| 308 | memset(&props, 0, sizeof(struct backlight_properties)); | | |
| 309 | props.max_brightness = 0xff; | | |
| 310 | props.type = BACKLIGHT_RAW; | | |
| 311 | sdc_set_brightness(fbd, fbd->backlight_level); | | |
| 312 | | | |
| 313 | bl = backlight_device_register("mx3fb-bl", fbd->dev, fbd, | | |
| 314 | &mx3fb_lcdc_bl_ops, &props); | | |
| 315 | if (IS_ERR(bl)) { | | |
| 316 | dev_err(fbd->dev, "error %ld on backlight register\n", | | |
| 317 | PTR_ERR(bl)); | | |
| 318 | return; | | |
| 319 | } | | |
| 320 | | | |
| 321 | fbd->bl = bl; | | |
| 322 | bl->props.power = FB_BLANK_UNBLANK; | | |
| 323 | bl->props.fb_blank = FB_BLANK_UNBLANK; | | |
| 324 | bl->props.brightness = mx3fb_bl_get_brightness(bl); | | |
| 325 | } | | |
| 326 | | | |
| 327 | static void mx3fb_exit_backlight(struct mx3fb_data *fbd) | | |
| 328 | { | | |
| 329 | backlight_device_unregister(fbd->bl); | | |
| 330 | } | | |
| 331 | | | |
| 332 | static void mx3fb_dma_done(void *); | | |
| 333 | | | |
| 334 | /* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */ | | |
| 335 | static const char *fb_mode; | | |
| 336 | static unsigned long default_bpp = 16; | | |
| 337 | | | |
| 338 | static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg) | | |
| 339 | { | | |
| 340 | return __raw_readl(mx3fb->reg_base + reg); | | |
| 341 | } | | |
| 342 | | | |
| 343 | static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg) | | |
| 344 | { | | |
| 345 | __raw_writel(value, mx3fb->reg_base + reg); | | |
| 346 | } | | |
| 347 | | | |
| 348 | struct di_mapping { | | |
| 349 | uint32_t b0, b1, b2; | | |
| 350 | }; | | |
| 351 | | | |
| 352 | static const struct di_mapping di_mappings[] = { | | |
| 353 | [IPU_DISP_DATA_MAPPING_RGB666] = { 0x0005000f, 0x000b000f, 0x0011000f }, | | |
| 354 | [IPU_DISP_DATA_MAPPING_RGB565] = { 0x0004003f, 0x000a000f, 0x000f003f }, | | |
| 355 | [IPU_DISP_DATA_MAPPING_RGB888] = { 0x00070000, 0x000f0000, 0x00170000 }, | | |
| 356 | }; | | |
| 357 | | | |
| 358 | static void sdc_fb_init(struct mx3fb_info *fbi) | | |
| 359 | { | | |
| 360 | struct mx3fb_data *mx3fb = fbi->mx3fb; | | |
| 361 | uint32_t reg; | | |
| 362 | | | |
| 363 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); | | |
| 364 | | | |
| 365 | mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF); | | |
| 366 | } | | |
| 367 | | | |
| 368 | /* Returns enabled flag before uninit */ | | |
| 369 | static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi) | | |
| 370 | { | | |
| 371 | struct mx3fb_data *mx3fb = fbi->mx3fb; | | |
| 372 | uint32_t reg; | | |
| 373 | | | |
| 374 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); | | |
| 375 | | | |
| 376 | mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF); | | |
| 377 | | | |
| 378 | return reg & SDC_COM_BG_EN; | | |
| 379 | } | | |
| 380 | | | |
| 381 | static void sdc_enable_channel(struct mx3fb_info *mx3_fbi) | | |
| 382 | { | | |
| 383 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; | | |
| 384 | struct idmac_channel *ichan = mx3_fbi->idmac_channel; | | |
| 385 | struct dma_chan *dma_chan = &ichan->dma_chan; | | |
| 386 | unsigned long flags; | | |
| 387 | dma_cookie_t cookie; | | |
| 388 | | | |
| 389 | if (mx3_fbi->txd) | | |
| 390 | dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, | | |
| 391 | to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); | | |
| 392 | else | | |
| 393 | dev_dbg(mx3fb->dev, "mx3fbi %p, txd = NULL\n", mx3_fbi); | | |
| 394 | | | |
| 395 | /* This enables the channel */ | | |
| 396 | if (mx3_fbi->cookie < 0) { | | |
| 397 | mx3_fbi->txd = dmaengine_prep_slave_sg(dma_chan, | | |
| 398 | &mx3_fbi->sg[0], 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); | | |
| 399 | if (!mx3_fbi->txd) { | | |
| 400 | dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n", | | |
| 401 | dma_chan->chan_id); | | |
| 402 | return; | | |
| 403 | } | | |
| 404 | | | |
| 405 | mx3_fbi->txd->callback_param = mx3_fbi->txd; | | |
| 406 | mx3_fbi->txd->callback = mx3fb_dma_done; | | |
| 407 | | | |
| 408 | cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd); | | |
| 409 | dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__, | | |
| 410 | mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); | | |
| 411 | } else { | | |
| 412 | if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) { | | |
| 413 | dev_err(mx3fb->dev, "Cannot enable channel %d\n", | | |
| 414 | dma_chan->chan_id); | | |
| 415 | return; | | |
| 416 | } | | |
| 417 | | | |
| 418 | /* Just re-activate the same buffer */ | | |
| 419 | dma_async_issue_pending(dma_chan); | | |
| 420 | cookie = mx3_fbi->cookie; | | |
| 421 | dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__, | | |
| 422 | mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); | | |
| 423 | } | | |
| 424 | | | |
| 425 | if (cookie >= 0) { | | |
| 426 | spin_lock_irqsave(&mx3fb->lock, flags); | | |
| 427 | sdc_fb_init(mx3_fbi); | | |
| 428 | mx3_fbi->cookie = cookie; | | |
| 429 | spin_unlock_irqrestore(&mx3fb->lock, flags); | | |
| 430 | } | | |
| 431 | | | |
| 432 | /* | | |
| 433 | * Attention! Without this msleep the channel keeps generating | | |
| 434 | * interrupts. Next sdc_set_brightness() is going to be called | | |
| 435 | * from mx3fb_blank(). | | |
| 436 | */ | | |
| 437 | msleep(2); | | |
| 438 | } | | |
| 439 | | | |
| 440 | static void sdc_disable_channel(struct mx3fb_info *mx3_fbi) | | |
| 441 | { | | |
| 442 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; | | |
| 443 | unsigned long flags; | | |
| 444 | | | |
| 445 | if (mx3_fbi->txd == NULL) | | |
| 446 | return; | | |
| 447 | | | |
| 448 | spin_lock_irqsave(&mx3fb->lock, flags); | | |
| 449 | | | |
| 450 | sdc_fb_uninit(mx3_fbi); | | |
| 451 | | | |
| 452 | spin_unlock_irqrestore(&mx3fb->lock, flags); | | |
| 453 | | | |
| 454 | dmaengine_terminate_all(mx3_fbi->txd->chan); | | |
| 455 | mx3_fbi->txd = NULL; | | |
| 456 | mx3_fbi->cookie = -EINVAL; | | |
| 457 | } | | |
| 458 | | | |
| 459 | /** | | |
| 460 | * sdc_set_window_pos() - set window position of the respective plane. | | |
| 461 | * @mx3fb: mx3fb context. | | |
| 462 | * @channel: IPU DMAC channel ID. | | |
| 463 | * @x_pos: X coordinate relative to the top left corner to place window at. | | |
| 464 | * @y_pos: Y coordinate relative to the top left corner to place window at. | | |
| 465 | * @return: 0 on success or negative error code on failure. | | |
| 466 | */ | | |
| 467 | static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel, | | |
| 468 | int16_t x_pos, int16_t y_pos) | | |
| 469 | { | | |
| 470 | if (channel != IDMAC_SDC_0) | | |
| 471 | return -EINVAL; | | |
| 472 | | | |
| 473 | x_pos += mx3fb->h_start_width; | | |
| 474 | y_pos += mx3fb->v_start_width; | | |
| 475 | | | |
| 476 | mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS); | | |
| 477 | return 0; | | |
| 478 | } | | |
| 479 | | | |
| 480 | /** | | |
| 481 | * sdc_init_panel() - initialize a synchronous LCD panel. | | |
| 482 | * @mx3fb: mx3fb context. | | |
| 483 | * @panel: panel type. | | |
| 484 | * @pixel_clk: desired pixel clock frequency in Hz. | | |
| 485 | * @width: width of panel in pixels. | | |
| 486 | * @height: height of panel in pixels. | | |
| 487 | * @h_start_width: number of pixel clocks between the HSYNC signal pulse | | |
| 488 | * and the start of valid data. | | |
| 489 | * @h_sync_width: width of the HSYNC signal in units of pixel clocks. | | |
| 490 | * @h_end_width: number of pixel clocks between the end of valid data | | |
| 491 | * and the HSYNC signal for next line. | | |
| 492 | * @v_start_width: number of lines between the VSYNC signal pulse and the | | |
| 493 | * start of valid data. | | |
| 494 | * @v_sync_width: width of the VSYNC signal in units of lines | | |
| 495 | * @v_end_width: number of lines between the end of valid data and the | | |
| 496 | * VSYNC signal for next frame. | | |
| 497 | * @sig: bitfield of signal polarities for LCD interface. | | |
| 498 | * @return: 0 on success or negative error code on failure. | | |
| 499 | */ | | |
| 500 | static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel, | | |
| 501 | uint32_t pixel_clk, | | |
| 502 | uint16_t width, uint16_t height, | | |
| 503 | uint16_t h_start_width, uint16_t h_sync_width, | | |
| 504 | uint16_t h_end_width, uint16_t v_start_width, | | |
| 505 | uint16_t v_sync_width, uint16_t v_end_width, | | |
| 506 | const struct ipu_di_signal_cfg *sig) | | |
| 507 | { | | |
| 508 | unsigned long lock_flags; | | |
| 509 | uint32_t reg; | | |
| 510 | uint32_t old_conf; | | |
| 511 | uint32_t div; | | |
| 512 | struct clk *ipu_clk; | | |
| 513 | const struct di_mapping *map; | | |
| 514 | | | |
| 515 | dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height); | | |
| 516 | | | |
| 517 | if (v_sync_width == 0 || h_sync_width == 0) | | |
| 518 | return -EINVAL; | | |
| 519 | | | |
| 520 | /* Init panel size and blanking periods */ | | |
| 521 | reg = ((uint32_t) (h_sync_width - 1) << 26) | | | |
| 522 | ((uint32_t) (width + h_start_width + h_end_width - 1) << 16); | | |
| 523 | mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF); | | |
| 524 | | | |
| 525 | #ifdef DEBUG | | |
| 526 | printk(KERN_CONT " hor_conf %x,", reg); | | |
| 527 | #endif | | |
| 528 | | | |
| 529 | reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L | | | |
| 530 | ((uint32_t) (height + v_start_width + v_end_width - 1) << 16); | | |
| 531 | mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF); | | |
| 532 | | | |
| 533 | #ifdef DEBUG | | |
| 534 | printk(KERN_CONT " ver_conf %x\n", reg); | | |
| 535 | #endif | | |
| 536 | | | |
| 537 | mx3fb->h_start_width = h_start_width; | | |
| 538 | mx3fb->v_start_width = v_start_width; | | |
| 539 | | | |
| 540 | switch (panel) { | | |
| 541 | case IPU_PANEL_SHARP_TFT: | | |
| 542 | mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1); | | |
| 543 | mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2); | | |
| 544 | mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF); | | |
| 545 | break; | | |
| 546 | case IPU_PANEL_TFT: | | |
| 547 | mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF); | | |
| 548 | break; | | |
| 549 | default: | | |
| 550 | return -EINVAL; | | |
| 551 | } | | |
| 552 | | | |
| 553 | /* Init clocking */ | | |
| 554 | | | |
| 555 | /* | | |
| 556 | * Calculate divider: fractional part is 4 bits so simply multiple by | | |
| 557 | * 2^4 to get fractional part, as long as we stay under ~250MHz and on | | |
| 558 | * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz | | |
| 559 | */ | | |
| 560 | ipu_clk = clk_get(mx3fb->dev, NULL); | | |
| 561 | if (!IS_ERR(ipu_clk)) { | | |
| 562 | div = clk_get_rate(ipu_clk) * 16 / pixel_clk; | | |
| 563 | clk_put(ipu_clk); | | |
| 564 | } else { | | |
| 565 | div = 0; | | |
| 566 | } | | |
| 567 | | | |
| 568 | if (div < 0x40) { /* Divider less than 4 */ | | |
| 569 | dev_dbg(mx3fb->dev, | | |
| 570 | "InitPanel() - Pixel clock divider less than 4\n"); | | |
| 571 | div = 0x40; | | |
| 572 | } | | |
| 573 | | | |
| 574 | dev_dbg(mx3fb->dev, "pixel clk = %u, divider %u.%u\n", | | |
| 575 | pixel_clk, div >> 4, (div & 7) * 125); | | |
| 576 | | | |
| 577 | spin_lock_irqsave(&mx3fb->lock, lock_flags); | | |
| 578 | | | |
| 579 | /* | | |
| 580 | * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits | | |
| 581 | * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing | | |
| 582 | * debug. DISP3_IF_CLK_UP_WR is 0 | | |
| 583 | */ | | |
| 584 | mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF); | | |
| 585 | | | |
| 586 | /* DI settings */ | | |
| 587 | old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF; | | |
| 588 | old_conf |= sig->datamask_en << DI_D3_DATAMSK_SHIFT | | | |
| 589 | sig->clksel_en << DI_D3_CLK_SEL_SHIFT | | | |
| 590 | sig->clkidle_en << DI_D3_CLK_IDLE_SHIFT; | | |
| 591 | mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF); | | |
| 592 | | | |
| 593 | old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF; | | |
| 594 | old_conf |= sig->data_pol << DI_D3_DATA_POL_SHIFT | | | |
| 595 | sig->clk_pol << DI_D3_CLK_POL_SHIFT | | | |
| 596 | sig->enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT | | | |
| 597 | sig->Hsync_pol << DI_D3_HSYNC_POL_SHIFT | | | |
| 598 | sig->Vsync_pol << DI_D3_VSYNC_POL_SHIFT; | | |
| 599 | mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL); | | |
| 600 | | | |
| 601 | map = &di_mappings[mx3fb->disp_data_fmt]; | | |
| 602 | mx3fb_write_reg(mx3fb, map->b0, DI_DISP3_B0_MAP); | | |
| 603 | mx3fb_write_reg(mx3fb, map->b1, DI_DISP3_B1_MAP); | | |
| 604 | mx3fb_write_reg(mx3fb, map->b2, DI_DISP3_B2_MAP); | | |
| 605 | | | |
| 606 | spin_unlock_irqrestore(&mx3fb->lock, lock_flags); | | |
| 607 | | | |
| 608 | dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n", | | |
| 609 | mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF)); | | |
| 610 | dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n", | | |
| 611 | mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL)); | | |
| 612 | dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n", | | |
| 613 | mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF)); | | |
| 614 | | | |
| 615 | return 0; | | |
| 616 | } | | |
| 617 | | | |
| 618 | /** | | |
| 619 | * sdc_set_color_key() - set the transparent color key for SDC graphic plane. | | |
| 620 | * @mx3fb: mx3fb context. | | |
| 621 | * @channel: IPU DMAC channel ID. | | |
| 622 | * @enable: boolean to enable or disable color keyl. | | |
| 623 | * @color_key: 24-bit RGB color to use as transparent color key. | | |
| 624 | * @return: 0 on success or negative error code on failure. | | |
| 625 | */ | | |
| 626 | static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel, | | |
| 627 | bool enable, uint32_t color_key) | | |
| 628 | { | | |
| 629 | uint32_t reg, sdc_conf; | | |
| 630 | unsigned long lock_flags; | | |
| 631 | | | |
| 632 | spin_lock_irqsave(&mx3fb->lock, lock_flags); | | |
| 633 | | | |
| 634 | sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF); | | |
| 635 | if (channel == IDMAC_SDC_0) | | |
| 636 | sdc_conf &= ~SDC_COM_GWSEL; | | |
| 637 | else | | |
| 638 | sdc_conf |= SDC_COM_GWSEL; | | |
| 639 | | | |
| 640 | if (enable) { | | |
| 641 | reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L; | | |
| 642 | mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL), | | |
| 643 | SDC_GW_CTRL); | | |
| 644 | | | |
| 645 | sdc_conf |= SDC_COM_KEY_COLOR_G; | | |
| 646 | } else { | | |
| 647 | sdc_conf &= ~SDC_COM_KEY_COLOR_G; | | |
| 648 | } | | |
| 649 | mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF); | | |
| 650 | | | |
| 651 | spin_unlock_irqrestore(&mx3fb->lock, lock_flags); | | |
| 652 | | | |
| 653 | return 0; | | |
| 654 | } | | |
| 655 | | | |
| 656 | /** | | |
| 657 | * sdc_set_global_alpha() - set global alpha blending modes. | | |
| 658 | * @mx3fb: mx3fb context. | | |
| 659 | * @enable: boolean to enable or disable global alpha blending. If disabled, | | |
| 660 | * per pixel blending is used. | | |
| 661 | * @alpha: global alpha value. | | |
| 662 | * @return: 0 on success or negative error code on failure. | | |
| 663 | */ | | |
| 664 | static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha) | | |
| 665 | { | | |
| 666 | uint32_t reg; | | |
| 667 | unsigned long lock_flags; | | |
| 668 | | | |
| 669 | spin_lock_irqsave(&mx3fb->lock, lock_flags); | | |
| 670 | | | |
| 671 | if (enable) { | | |
| 672 | reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL; | | |
| 673 | mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL); | | |
| 674 | | | |
| 675 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); | | |
| 676 | mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF); | | |
| 677 | } else { | | |
| 678 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); | | |
| 679 | mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF); | | |
| 680 | } | | |
| 681 | | | |
| 682 | spin_unlock_irqrestore(&mx3fb->lock, lock_flags); | | |
| 683 | | | |
| 684 | return 0; | | |
| 685 | } | | |
| 686 | | | |
| 687 | static u32 sdc_get_brightness(struct mx3fb_data *mx3fb) | | |
| 688 | { | | |
| 689 | u32 brightness; | | |
| 690 | | | |
| 691 | brightness = mx3fb_read_reg(mx3fb, SDC_PWM_CTRL); | | |
| 692 | brightness = (brightness >> 16) & 0xFF; | | |
| 693 | | | |
| 694 | return brightness; | | |
| 695 | } | | |
| 696 | | | |
| 697 | static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value) | | |
| 698 | { | | |
| 699 | dev_dbg(mx3fb->dev, "%s: value = %d\n", __func__, value); | | |
| 700 | /* This might be board-specific */ | | |
| 701 | mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL); | | |
| 702 | return; | | |
| 703 | } | | |
| 704 | | | |
| 705 | static uint32_t bpp_to_pixfmt(int bpp) | | |
| 706 | { | | |
| 707 | uint32_t pixfmt = 0; | | |
| 708 | switch (bpp) { | | |
| 709 | case 24: | | |
| 710 | pixfmt = IPU_PIX_FMT_BGR24; | | |
| 711 | break; | | |
| 712 | case 32: | | |
| 713 | pixfmt = IPU_PIX_FMT_BGR32; | | |
| 714 | break; | | |
| 715 | case 16: | | |
| 716 | pixfmt = IPU_PIX_FMT_RGB565; | | |
| 717 | break; | | |
| 718 | } | | |
| 719 | return pixfmt; | | |
| 720 | } | | |
| 721 | | | |
| 722 | static int mx3fb_blank(int blank, struct fb_info *fbi); | | |
| 723 | static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len, | | |
| 724 | bool lock); | | |
| 725 | static int mx3fb_unmap_video_memory(struct fb_info *fbi); | | |
| 726 | | | |
| 727 | /** | | |
| 728 | * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings. | | |
| 729 | * @fbi: framebuffer information pointer | | |
| 730 | * @return: 0 on success or negative error code on failure. | | |
| 731 | */ | | |
| 732 | static int mx3fb_set_fix(struct fb_info *fbi) | | |
| 733 | { | | |
| 734 | struct fb_fix_screeninfo *fix = &fbi->fix; | | |
| 735 | struct fb_var_screeninfo *var = &fbi->var; | | |
| 736 | | | |
| 737 | memcpy(fix->id, "DISP3 BG", 8); | | |
| 738 | | | |
| 739 | fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; | | |
| 740 | | | |
| 741 | fix->type = FB_TYPE_PACKED_PIXELS; | | |
| 742 | fix->accel = FB_ACCEL_NONE; | | |
| 743 | fix->visual = FB_VISUAL_TRUECOLOR; | | |
| 744 | fix->xpanstep = 1; | | |
| 745 | fix->ypanstep = 1; | | |
| 746 | | | |
| 747 | return 0; | | |
| 748 | } | | |
| 749 | | | |
| 750 | static void mx3fb_dma_done(void *arg) | | |
| 751 | { | | |
| 752 | struct idmac_tx_desc *tx_desc = to_tx_desc(arg); | | |
| 753 | struct dma_chan *chan = tx_desc->txd.chan; | | |
| 754 | struct idmac_channel *ichannel = to_idmac_chan(chan); | | |
| 755 | struct mx3fb_data *mx3fb = ichannel->client; | | |
| 756 | struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; | | |
| 757 | | | |
| 758 | dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq); | | |
| 759 | | | |
| 760 | /* We only need one interrupt, it will be re-enabled as needed */ | | |
| 761 | disable_irq_nosync(ichannel->eof_irq); | | |
| 762 | | | |
| 763 | complete(&mx3_fbi->flip_cmpl); | | |
| 764 | } | | |
| 765 | | | |
| 766 | static bool mx3fb_must_set_par(struct fb_info *fbi) | | |
| 767 | { | | |
| 768 | struct mx3fb_info *mx3_fbi = fbi->par; | | |
| 769 | struct fb_var_screeninfo old_var = mx3_fbi->cur_var; | | |
| 770 | struct fb_var_screeninfo new_var = fbi->var; | | |
| 771 | | | |
| 772 | if ((fbi->var.activate & FB_ACTIVATE_FORCE) && | | |
| 773 | (fbi->var.activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) | | |
| 774 | return true; | | |
| 775 | | | |
| 776 | /* | | |
| 777 | * Ignore xoffset and yoffset update, | | |
| 778 | * because pan display handles this case. | | |
| 779 | */ | | |
| 780 | old_var.xoffset = new_var.xoffset; | | |
| 781 | old_var.yoffset = new_var.yoffset; | | |
| 782 | | | |
| 783 | return !!memcmp(&old_var, &new_var, sizeof(struct fb_var_screeninfo)); | | |
| 784 | } | | |
| 785 | | | |
| 786 | static int __set_par(struct fb_info *fbi, bool lock) | | |
| 787 | { | | |
| 788 | u32 mem_len, cur_xoffset, cur_yoffset; | | |
| 789 | struct ipu_di_signal_cfg sig_cfg; | | |
| 790 | enum ipu_panel mode = IPU_PANEL_TFT; | | |
| 791 | struct mx3fb_info *mx3_fbi = fbi->par; | | |
| 792 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; | | |
| 793 | struct idmac_channel *ichan = mx3_fbi->idmac_channel; | | |
| 794 | struct idmac_video_param *video = &ichan->params.video; | | |
| 795 | struct scatterlist *sg = mx3_fbi->sg; | | |
| 796 | | | |
| 797 | /* Total cleanup */ | | |
| 798 | if (mx3_fbi->txd) | | |
| 799 | sdc_disable_channel(mx3_fbi); | | |
| 800 | | | |
| 801 | mx3fb_set_fix(fbi); | | |
| 802 | | | |
| 803 | mem_len = fbi->var.yres_virtual * fbi->fix.line_length; | | |
| 804 | if (mem_len > fbi->fix.smem_len) { | | |
| 805 | if (fbi->fix.smem_start) | | |
| 806 | mx3fb_unmap_video_memory(fbi); | | |
| 807 | | | |
| 808 | if (mx3fb_map_video_memory(fbi, mem_len, lock) < 0) | | |
| 809 | return -ENOMEM; | | |
| 810 | } | | |
| 811 | | | |
| 812 | sg_init_table(&sg[0], 1); | | |
| 813 | sg_init_table(&sg[1], 1); | | |
| 814 | | | |
| 815 | sg_dma_address(&sg[0]) = fbi->fix.smem_start; | | |
| 816 | sg_set_page(&sg[0], virt_to_page(fbi->screen_base), | | |
| 817 | fbi->fix.smem_len, | | |
| 818 | offset_in_page(fbi->screen_base)); | | |
| 819 | | | |
| 820 | if (mx3_fbi->ipu_ch == IDMAC_SDC_0) { | | |
| 821 | memset(&sig_cfg, 0, sizeof(sig_cfg)); | | |
| 822 | if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT) | | |
| 823 | sig_cfg.Hsync_pol = true; | | |
| 824 | if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT) | | |
| 825 | sig_cfg.Vsync_pol = true; | | |
| 826 | if (fbi->var.sync & FB_SYNC_CLK_INVERT) | | |
| 827 | sig_cfg.clk_pol = true; | | |
| 828 | if (fbi->var.sync & FB_SYNC_DATA_INVERT) | | |
| 829 | sig_cfg.data_pol = true; | | |
| 830 | if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH) | | |
| 831 | sig_cfg.enable_pol = true; | | |
| 832 | if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN) | | |
| 833 | sig_cfg.clkidle_en = true; | | |
| 834 | if (fbi->var.sync & FB_SYNC_CLK_SEL_EN) | | |
| 835 | sig_cfg.clksel_en = true; | | |
| 836 | if (fbi->var.sync & FB_SYNC_SHARP_MODE) | | |
| 837 | mode = IPU_PANEL_SHARP_TFT; | | |
| 838 | | | |
| 839 | dev_dbg(fbi->device, "pixclock = %u Hz\n", | | |
| 840 | (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL)); | | |
| 841 | | | |
| 842 | if (sdc_init_panel(mx3fb, mode, | | |
| 843 | (PICOS2KHZ(fbi->var.pixclock)) * 1000UL, | | |
| 844 | fbi->var.xres, fbi->var.yres, | | |
| 845 | fbi->var.left_margin, | | |
| 846 | fbi->var.hsync_len, | | |
| 847 | fbi->var.right_margin + | | |
| 848 | fbi->var.hsync_len, | | |
| 849 | fbi->var.upper_margin, | | |
| 850 | fbi->var.vsync_len, | | |
| 851 | fbi->var.lower_margin + | | |
| 852 | fbi->var.vsync_len, &sig_cfg) != 0) { | | |
| 853 | dev_err(fbi->device, | | |
| 854 | "mx3fb: Error initializing panel.\n"); | | |
| 855 | return -EINVAL; | | |
| 856 | } | | |
| 857 | } | | |
| 858 | | | |
| 859 | sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0); | | |
| 860 | | | |
| 861 | mx3_fbi->cur_ipu_buf = 0; | | |
| 862 | | | |
| 863 | video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel); | | |
| 864 | video->out_width = fbi->var.xres; | | |
| 865 | video->out_height = fbi->var.yres; | | |
| 866 | video->out_stride = fbi->var.xres_virtual; | | |
| 867 | | | |
| 868 | if (mx3_fbi->blank == FB_BLANK_UNBLANK) { | | |
| 869 | sdc_enable_channel(mx3_fbi); | | |
| 870 | /* | | |
| 871 | * sg[0] points to fb smem_start address | | |
| 872 | * and is actually active in controller. | | |
| 873 | */ | | |
| 874 | mx3_fbi->cur_var.xoffset = 0; | | |
| 875 | mx3_fbi->cur_var.yoffset = 0; | | |
| 876 | } | | |
| 877 | | | |
| 878 | /* | | |
| 879 | * Preserve xoffset and yoffest in case they are | | |
| 880 | * inactive in controller as fb is blanked. | | |
| 881 | */ | | |
| 882 | cur_xoffset = mx3_fbi->cur_var.xoffset; | | |
| 883 | cur_yoffset = mx3_fbi->cur_var.yoffset; | | |
| 884 | mx3_fbi->cur_var = fbi->var; | | |
| 885 | mx3_fbi->cur_var.xoffset = cur_xoffset; | | |
| 886 | mx3_fbi->cur_var.yoffset = cur_yoffset; | | |
| 887 | | | |
| 888 | return 0; | | |
| 889 | } | | |
| 890 | | | |
| 891 | /** | | |
| 892 | * mx3fb_set_par() - set framebuffer parameters and change the operating mode. | | |
| 893 | * @fbi: framebuffer information pointer. | | |
| 894 | * @return: 0 on success or negative error code on failure. | | |
| 895 | */ | | |
| 896 | static int mx3fb_set_par(struct fb_info *fbi) | | |
| 897 | { | | |
| 898 | struct mx3fb_info *mx3_fbi = fbi->par; | | |
| 899 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; | | |
| 900 | struct idmac_channel *ichan = mx3_fbi->idmac_channel; | | |
| 901 | int ret; | | |
| 902 | | | |
| 903 | dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+'); | | |
| 904 | | | |
| 905 | mutex_lock(&mx3_fbi->mutex); | | |
| 906 | | | |
| 907 | ret = mx3fb_must_set_par(fbi) ? __set_par(fbi, true) : 0; | | |
| 908 | | | |
| 909 | mutex_unlock(&mx3_fbi->mutex); | | |
| 910 | | | |
| 911 | return ret; | | |
| 912 | } | | |
| 913 | | | |
| 914 | /** | | |
| 915 | * mx3fb_check_var() - check and adjust framebuffer variable parameters. | | |
| 916 | * @var: framebuffer variable parameters | | |
| 917 | * @fbi: framebuffer information pointer | | |
| 918 | */ | | |
| 919 | static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) | | |
| 920 | { | | |
| 921 | struct mx3fb_info *mx3_fbi = fbi->par; | | |
| 922 | u32 vtotal; | | |
| 923 | u32 htotal; | | |
| 924 | | | |
| 925 | dev_dbg(fbi->device, "%s\n", __func__); | | |
| 926 | | | |
| 927 | if (var->xres_virtual < var->xres) | | |
| 928 | var->xres_virtual = var->xres; | | |
| 929 | if (var->yres_virtual < var->yres) | | |
| 930 | var->yres_virtual = var->yres; | | |
| 931 | | | |
| 932 | if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && | | |
| 933 | (var->bits_per_pixel != 16)) | | |
| 934 | var->bits_per_pixel = default_bpp; | | |
| 935 | | | |
| 936 | switch (var->bits_per_pixel) { | | |
| 937 | case 16: | | |
| 938 | var->red.length = 5; | | |
| 939 | var->red.offset = 11; | | |
| 940 | var->red.msb_right = 0; | | |
| 941 | | | |
| 942 | var->green.length = 6; | | |
| 943 | var->green.offset = 5; | | |
| 944 | var->green.msb_right = 0; | | |
| 945 | | | |
| 946 | var->blue.length = 5; | | |
| 947 | var->blue.offset = 0; | | |
| 948 | var->blue.msb_right = 0; | | |
| 949 | | | |
| 950 | var->transp.length = 0; | | |
| 951 | var->transp.offset = 0; | | |
| 952 | var->transp.msb_right = 0; | | |
| 953 | break; | | |
| 954 | case 24: | | |
| 955 | var->red.length = 8; | | |
| 956 | var->red.offset = 16; | | |
| 957 | var->red.msb_right = 0; | | |
| 958 | | | |
| 959 | var->green.length = 8; | | |
| 960 | var->green.offset = 8; | | |
| 961 | var->green.msb_right = 0; | | |
| 962 | | | |
| 963 | var->blue.length = 8; | | |
| 964 | var->blue.offset = 0; | | |
| 965 | var->blue.msb_right = 0; | | |
| 966 | | | |
| 967 | var->transp.length = 0; | | |
| 968 | var->transp.offset = 0; | | |
| 969 | var->transp.msb_right = 0; | | |
| 970 | break; | | |
| 971 | case 32: | | |
| 972 | var->red.length = 8; | | |
| 973 | var->red.offset = 16; | | |
| 974 | var->red.msb_right = 0; | | |
| 975 | | | |
| 976 | var->green.length = 8; | | |
| 977 | var->green.offset = 8; | | |
| 978 | var->green.msb_right = 0; | | |
| 979 | | | |
| 980 | var->blue.length = 8; | | |
| 981 | var->blue.offset = 0; | | |
| 982 | var->blue.msb_right = 0; | | |
| 983 | | | |
| 984 | var->transp.length = 8; | | |
| 985 | var->transp.offset = 24; | | |
| 986 | var->transp.msb_right = 0; | | |
| 987 | break; | | |
| 988 | } | | |
| 989 | | | |
| 990 | if (var->pixclock < 1000) { | | |
| 991 | htotal = var->xres + var->right_margin + var->hsync_len + | | |
| 992 | var->left_margin; | | |
| 993 | vtotal = var->yres + var->lower_margin + var->vsync_len + | | |
| 994 | var->upper_margin; | | |
| 995 | var->pixclock = (vtotal * htotal * 6UL) / 100UL; | | |
| 996 | var->pixclock = KHZ2PICOS(var->pixclock); | | |
| 997 | dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n", | | |
| 998 | var->pixclock); | | |
| 999 | } | | |
| 1000 | | | |
| 1001 | var->height = -1; | | |
| 1002 | var->width = -1; | | |
| 1003 | var->grayscale = 0; | | |
| 1004 | | | |
| 1005 | /* Preserve sync flags */ | | |
| 1006 | var->sync |= mx3_fbi->cur_var.sync; | | |
| 1007 | mx3_fbi->cur_var.sync |= var->sync; | | |
| 1008 | | | |
| 1009 | return 0; | | |
| 1010 | } | | |
| 1011 | | | |
| 1012 | static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf) | | |
| 1013 | { | | |
| 1014 | chan &= 0xffff; | | |
| 1015 | chan >>= 16 - bf->length; | | |
| 1016 | return chan << bf->offset; | | |
| 1017 | } | | |
| 1018 | | | |
| 1019 | static int mx3fb_setcolreg(unsigned int regno, unsigned int red, | | |
| 1020 | unsigned int green, unsigned int blue, | | |
| 1021 | unsigned int trans, struct fb_info *fbi) | | |
| 1022 | { | | |
| 1023 | struct mx3fb_info *mx3_fbi = fbi->par; | | |
| 1024 | u32 val; | | |
| 1025 | int ret = 1; | | |
| 1026 | | | |
| 1027 | dev_dbg(fbi->device, "%s, regno = %u\n", __func__, regno); | | |
| 1028 | | | |
| 1029 | mutex_lock(&mx3_fbi->mutex); | | |
| 1030 | /* | | |
| 1031 | * If greyscale is true, then we convert the RGB value | | |
| 1032 | * to greyscale no matter what visual we are using. | | |
| 1033 | */ | | |
| 1034 | if (fbi->var.grayscale) | | |
| 1035 | red = green = blue = (19595 * red + 38470 * green + | | |
| 1036 | 7471 * blue) >> 16; | | |
| 1037 | switch (fbi->fix.visual) { | | |
| 1038 | case FB_VISUAL_TRUECOLOR: | | |
| 1039 | /* | | |
| 1040 | * 16-bit True Colour. We encode the RGB value | | |
| 1041 | * according to the RGB bitfield information. | | |
| 1042 | */ | | |
| 1043 | if (regno < 16) { | | |
| 1044 | u32 *pal = fbi->pseudo_palette; | | |
| 1045 | | | |
| 1046 | val = chan_to_field(red, &fbi->var.red); | | |
| 1047 | val |= chan_to_field(green, &fbi->var.green); | | |
| 1048 | val |= chan_to_field(blue, &fbi->var.blue); | | |
| 1049 | | | |
| 1050 | pal[regno] = val; | | |
| 1051 | | | |
| 1052 | ret = 0; | | |
| 1053 | } | | |
| 1054 | break; | | |
| 1055 | | | |
| 1056 | case FB_VISUAL_STATIC_PSEUDOCOLOR: | | |
| 1057 | case FB_VISUAL_PSEUDOCOLOR: | | |
| 1058 | break; | | |
| 1059 | } | | |
| 1060 | mutex_unlock(&mx3_fbi->mutex); | | |
| 1061 | | | |
| 1062 | return ret; | | |
| 1063 | } | | |
| 1064 | | | |
| 1065 | static void __blank(int blank, struct fb_info *fbi) | | |
| 1066 | { | | |
| 1067 | struct mx3fb_info *mx3_fbi = fbi->par; | | |
| 1068 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; | | |
| 1069 | int was_blank = mx3_fbi->blank; | | |
| 1070 | | | |
| 1071 | mx3_fbi->blank = blank; | | |
| 1072 | | | |
| 1073 | /* Attention! | | |
| 1074 | * Do not call sdc_disable_channel() for a channel that is disabled | | |
| 1075 | * already! This will result in a kernel NULL pointer dereference | | |
| 1076 | * (mx3_fbi->txd is NULL). Hide the fact, that all blank modes are | | |
| 1077 | * handled equally by this driver. | | |
| 1078 | */ | | |
| 1079 | if (blank > FB_BLANK_UNBLANK && was_blank > FB_BLANK_UNBLANK) | | |
| 1080 | return; | | |
| 1081 | | | |
| 1082 | switch (blank) { | | |
| 1083 | case FB_BLANK_POWERDOWN: | | |
| 1084 | case FB_BLANK_VSYNC_SUSPEND: | | |
| 1085 | case FB_BLANK_HSYNC_SUSPEND: | | |
| 1086 | case FB_BLANK_NORMAL: | | |
| 1087 | sdc_set_brightness(mx3fb, 0); | | |
| 1088 | memset((char *)fbi->screen_base, 0, fbi->fix.smem_len); | | |
| 1089 | /* Give LCD time to update - enough for 50 and 60 Hz */ | | |
| 1090 | msleep(25); | | |
| 1091 | sdc_disable_channel(mx3_fbi); | | |
| 1092 | break; | | |
| 1093 | case FB_BLANK_UNBLANK: | | |
| 1094 | sdc_enable_channel(mx3_fbi); | | |
| 1095 | sdc_set_brightness(mx3fb, mx3fb->backlight_level); | | |
| 1096 | break; | | |
| 1097 | } | | |
| 1098 | } | | |
| 1099 | | | |
| 1100 | /** | | |
| 1101 | * mx3fb_blank() - blank the display. | | |
| 1102 | * @blank: blank value for the panel | | |
| 1103 | * @fbi: framebuffer information pointer | | |
| 1104 | */ | | |
| 1105 | static int mx3fb_blank(int blank, struct fb_info *fbi) | | |
| 1106 | { | | |
| 1107 | struct mx3fb_info *mx3_fbi = fbi->par; | | |
| 1108 | | | |
| 1109 | dev_dbg(fbi->device, "%s, blank = %d, base %p, len %u\n", __func__, | | |
| 1110 | blank, fbi->screen_base, fbi->fix.smem_len); | | |
| 1111 | | | |
| 1112 | if (mx3_fbi->blank == blank) | | |
| 1113 | return 0; | | |
| 1114 | | | |
| 1115 | mutex_lock(&mx3_fbi->mutex); | | |
| 1116 | __blank(blank, fbi); | | |
| 1117 | mutex_unlock(&mx3_fbi->mutex); | | |
| 1118 | | | |
| 1119 | return 0; | | |
| 1120 | } | | |
| 1121 | | | |
| 1122 | /** | | |
| 1123 | * mx3fb_pan_display() - pan or wrap the display | | |
| 1124 | * @var: variable screen buffer information. | | |
| 1125 | * @fbi: framebuffer information pointer. | | |
| 1126 | * | | |
| 1127 | * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag | | |
| 1128 | */ | | |
| 1129 | static int mx3fb_pan_display(struct fb_var_screeninfo *var, | | |
| 1130 | struct fb_info *fbi) | | |
| 1131 | { | | |
| 1132 | struct mx3fb_info *mx3_fbi = fbi->par; | | |
| 1133 | u32 y_bottom; | | |
| 1134 | unsigned long base; | | |
| 1135 | off_t offset; | | |
| 1136 | dma_cookie_t cookie; | | |
| 1137 | struct scatterlist *sg = mx3_fbi->sg; | | |
| 1138 | struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan; | | |
| 1139 | struct dma_async_tx_descriptor *txd; | | |
| 1140 | int ret; | | |
| 1141 | | | |
| 1142 | dev_dbg(fbi->device, "%s [%c]\n", __func__, | | |
| 1143 | list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+'); | | |
| 1144 | | | |
| 1145 | if (var->xoffset > 0) { | | |
| 1146 | dev_dbg(fbi->device, "x panning not supported\n"); | | |
| 1147 | return -EINVAL; | | |
| 1148 | } | | |
| 1149 | | | |
| 1150 | if (mx3_fbi->cur_var.xoffset == var->xoffset && | | |
| 1151 | mx3_fbi->cur_var.yoffset == var->yoffset) | | |
| 1152 | return 0; /* No change, do nothing */ | | |
| 1153 | | | |
| 1154 | y_bottom = var->yoffset; | | |
| 1155 | | | |
| 1156 | if (!(var->vmode & FB_VMODE_YWRAP)) | | |
| 1157 | y_bottom += fbi->var.yres; | | |
| 1158 | | | |
| 1159 | if (y_bottom > fbi->var.yres_virtual) | | |
| 1160 | return -EINVAL; | | |
| 1161 | | | |
| 1162 | mutex_lock(&mx3_fbi->mutex); | | |
| 1163 | | | |
| 1164 | offset = var->yoffset * fbi->fix.line_length | | |
| 1165 | + var->xoffset * (fbi->var.bits_per_pixel / 8); | | |
| 1166 | base = fbi->fix.smem_start + offset; | | |
| 1167 | | | |
| 1168 | dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n", | | |
| 1169 | mx3_fbi->cur_ipu_buf, base); | | |
| 1170 | | | |
| 1171 | /* | | |
| 1172 | * We enable the End of Frame interrupt, which will free a tx-descriptor, | | |
| 1173 | * which we will need for the next dmaengine_prep_slave_sg(). The | | |
| 1174 | * IRQ-handler will disable the IRQ again. | | |
| 1175 | */ | | |
| 1176 | init_completion(&mx3_fbi->flip_cmpl); | | |
| 1177 | enable_irq(mx3_fbi->idmac_channel->eof_irq); | | |
| 1178 | | | |
| 1179 | ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10); | | |
| 1180 | if (ret <= 0) { | | |
| 1181 | mutex_unlock(&mx3_fbi->mutex); | | |
| 1182 | dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ? | | |
| 1183 | "user interrupt" : "timeout"); | | |
| 1184 | disable_irq(mx3_fbi->idmac_channel->eof_irq); | | |
| 1185 | return ret ? : -ETIMEDOUT; | | |
| 1186 | } | | |
| 1187 | | | |
| 1188 | mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf; | | |
| 1189 | | | |
| 1190 | sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base; | | |
| 1191 | sg_set_page(&sg[mx3_fbi->cur_ipu_buf], | | |
| 1192 | virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len, | | |
| 1193 | offset_in_page(fbi->screen_base + offset)); | | |
| 1194 | | | |
| 1195 | if (mx3_fbi->txd) | | |
| 1196 | async_tx_ack(mx3_fbi->txd); | | |
| 1197 | | | |
| 1198 | txd = dmaengine_prep_slave_sg(dma_chan, sg + | | |
| 1199 | mx3_fbi->cur_ipu_buf, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); | | |
| 1200 | if (!txd) { | | |
| 1201 | dev_err(fbi->device, | | |
| 1202 | "Error preparing a DMA transaction descriptor.\n"); | | |
| 1203 | mutex_unlock(&mx3_fbi->mutex); | | |
| 1204 | return -EIO; | | |
| 1205 | } | | |
| 1206 | | | |
| 1207 | txd->callback_param = txd; | | |
| 1208 | txd->callback = mx3fb_dma_done; | | |
| 1209 | | | |
| 1210 | /* | | |
| 1211 | * Emulate original mx3fb behaviour: each new call to idmac_tx_submit() | | |
| 1212 | * should switch to another buffer | | |
| 1213 | */ | | |
| 1214 | cookie = txd->tx_submit(txd); | | |
| 1215 | dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie); | | |
| 1216 | if (cookie < 0) { | | |
| 1217 | dev_err(fbi->device, | | |
| 1218 | "Error updating SDC buf %d to address=0x%08lX\n", | | |
| 1219 | mx3_fbi->cur_ipu_buf, base); | | |
| 1220 | mutex_unlock(&mx3_fbi->mutex); | | |
| 1221 | return -EIO; | | |
| 1222 | } | | |
| 1223 | | | |
| 1224 | mx3_fbi->txd = txd; | | |
| 1225 | | | |
| 1226 | fbi->var.xoffset = var->xoffset; | | |
| 1227 | fbi->var.yoffset = var->yoffset; | | |
| 1228 | | | |
| 1229 | if (var->vmode & FB_VMODE_YWRAP) | | |
| 1230 | fbi->var.vmode |= FB_VMODE_YWRAP; | | |
| 1231 | else | | |
| 1232 | fbi->var.vmode &= ~FB_VMODE_YWRAP; | | |
| 1233 | | | |
| 1234 | mx3_fbi->cur_var = fbi->var; | | |
| 1235 | | | |
| 1236 | mutex_unlock(&mx3_fbi->mutex); | | |
| 1237 | | | |
| 1238 | dev_dbg(fbi->device, "Update complete\n"); | | |
| 1239 | | | |
| 1240 | return 0; | | |
| 1241 | } | | |
| 1242 | | | |
| 1243 | /* | | |
| 1244 | * This structure contains the pointers to the control functions that are | | |
| 1245 | * invoked by the core framebuffer driver to perform operations like | | |
| 1246 | * blitting, rectangle filling, copy regions and cursor definition. | | |
| 1247 | */ | | |
| 1248 | static const struct fb_ops mx3fb_ops = { | | |
| 1249 | .owner = THIS_MODULE, | | |
| 1250 | FB_DEFAULT_IOMEM_OPS, | | |
| 1251 | .fb_set_par = mx3fb_set_par, | | |
| 1252 | .fb_check_var = mx3fb_check_var, | | |
| 1253 | .fb_setcolreg = mx3fb_setcolreg, | | |
| 1254 | .fb_pan_display = mx3fb_pan_display, | | |
| 1255 | .fb_blank = mx3fb_blank, | | |
| 1256 | }; | | |
| 1257 | | | |
| 1258 | #ifdef CONFIG_PM | | |
| 1259 | /* | | |
| 1260 | * Power management hooks. Note that we won't be called from IRQ context, | | |
| 1261 | * unlike the blank functions above, so we may sleep. | | |
| 1262 | */ | | |
| 1263 | | | |
| 1264 | /* | | |
| 1265 | * Suspends the framebuffer and blanks the screen. Power management support | | |
| 1266 | */ | | |
| 1267 | static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) | | |
| 1268 | { | | |
| 1269 | struct mx3fb_data *mx3fb = platform_get_drvdata(pdev); | | |
| 1270 | struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; | | |
| 1271 | | | |
| 1272 | console_lock(); | | |
| 1273 | fb_set_suspend(mx3fb->fbi, 1); | | |
| 1274 | console_unlock(); | | |
| 1275 | | | |
| 1276 | if (mx3_fbi->blank == FB_BLANK_UNBLANK) { | | |
| 1277 | sdc_disable_channel(mx3_fbi); | | |
| 1278 | sdc_set_brightness(mx3fb, 0); | | |
| 1279 | | | |
| 1280 | } | | |
| 1281 | return 0; | | |
| 1282 | } | | |
| 1283 | | | |
| 1284 | /* | | |
| 1285 | * Resumes the framebuffer and unblanks the screen. Power management support | | |
| 1286 | */ | | |
| 1287 | static int mx3fb_resume(struct platform_device *pdev) | | |
| 1288 | { | | |
| 1289 | struct mx3fb_data *mx3fb = platform_get_drvdata(pdev); | | |
| 1290 | struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; | | |
| 1291 | | | |
| 1292 | if (mx3_fbi->blank == FB_BLANK_UNBLANK) { | | |
| 1293 | sdc_enable_channel(mx3_fbi); | | |
| 1294 | sdc_set_brightness(mx3fb, mx3fb->backlight_level); | | |
| 1295 | } | | |
| 1296 | | | |
| 1297 | console_lock(); | | |
| 1298 | fb_set_suspend(mx3fb->fbi, 0); | | |
| 1299 | console_unlock(); | | |
| 1300 | | | |
| 1301 | return 0; | | |
| 1302 | } | | |
| 1303 | #else | | |
| 1304 | #define mx3fb_suspend NULL | | |
| 1305 | #define mx3fb_resume NULL | | |
| 1306 | #endif | | |
| 1307 | | | |
| 1308 | /* | | |
| 1309 | * Main framebuffer functions | | |
| 1310 | */ | | |
| 1311 | | | |
| 1312 | /** | | |
| 1313 | * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer. | | |
| 1314 | * @fbi: framebuffer information pointer | | |
| 1315 | * @mem_len: length of mapped memory | | |
| 1316 | * @lock: do not lock during initialisation | | |
| 1317 | * @return: Error code indicating success or failure | | |
| 1318 | * | | |
| 1319 | * This buffer is remapped into a non-cached, non-buffered, memory region to | | |
| 1320 | * allow palette and pixel writes to occur without flushing the cache. Once this | | |
| 1321 | * area is remapped, all virtual memory access to the video memory should occur | | |
| 1322 | * at the new region. | | |
| 1323 | */ | | |
| 1324 | static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len, | | |
| 1325 | bool lock) | | |
| 1326 | { | | |
| 1327 | int retval = 0; | | |
| 1328 | dma_addr_t addr; | | |
| 1329 | | | |
| 1330 | fbi->screen_base = dma_alloc_wc(fbi->device, mem_len, &addr, | | |
| 1331 | GFP_DMA | GFP_KERNEL); | | |
| 1332 | | | |
| 1333 | if (!fbi->screen_base) { | | |
| 1334 | dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n", | | |
| 1335 | mem_len); | | |
| 1336 | retval = -EBUSY; | | |
| 1337 | goto err0; | | |
| 1338 | } | | |
| 1339 | | | |
| 1340 | if (lock) | | |
| 1341 | mutex_lock(&fbi->mm_lock); | | |
| 1342 | fbi->fix.smem_start = addr; | | |
| 1343 | fbi->fix.smem_len = mem_len; | | |
| 1344 | if (lock) | | |
| 1345 | mutex_unlock(&fbi->mm_lock); | | |
| 1346 | | | |
| 1347 | dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n", | | |
| 1348 | (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len); | | |
| 1349 | | | |
| 1350 | fbi->screen_size = fbi->fix.smem_len; | | |
| 1351 | | | |
| 1352 | /* Clear the screen */ | | |
| 1353 | memset((char *)fbi->screen_base, 0, fbi->fix.smem_len); | | |
| 1354 | | | |
| 1355 | return 0; | | |
| 1356 | | | |
| 1357 | err0: | | |
| 1358 | fbi->fix.smem_len = 0; | | |
| 1359 | fbi->fix.smem_start = 0; | | |
| 1360 | fbi->screen_base = NULL; | | |
| 1361 | return retval; | | |
| 1362 | } | | |
| 1363 | | | |
| 1364 | /** | | |
| 1365 | * mx3fb_unmap_video_memory() - de-allocate frame buffer memory. | | |
| 1366 | * @fbi: framebuffer information pointer | | |
| 1367 | * @return: error code indicating success or failure | | |
| 1368 | */ | | |
| 1369 | static int mx3fb_unmap_video_memory(struct fb_info *fbi) | | |
| 1370 | { | | |
| 1371 | dma_free_wc(fbi->device, fbi->fix.smem_len, fbi->screen_base, | | |
| 1372 | fbi->fix.smem_start); | | |
| 1373 | | | |
| 1374 | fbi->screen_base = NULL; | | |
| 1375 | mutex_lock(&fbi->mm_lock); | | |
| 1376 | fbi->fix.smem_start = 0; | | |
| 1377 | fbi->fix.smem_len = 0; | | |
| 1378 | mutex_unlock(&fbi->mm_lock); | | |
| 1379 | return 0; | | |
| 1380 | } | | |
| 1381 | | | |
| 1382 | /** | | |
| 1383 | * mx3fb_init_fbinfo() - initialize framebuffer information object. | | |
| 1384 | * @dev: the device | | |
| 1385 | * @ops: framebuffer device operations | | |
| 1386 | * @return: initialized framebuffer structure. | | |
| 1387 | */ | | |
| 1388 | static struct fb_info *mx3fb_init_fbinfo(struct device *dev, | | |
| 1389 | const struct fb_ops *ops) | | |
| 1390 | { | | |
| 1391 | struct fb_info *fbi; | | |
| 1392 | struct mx3fb_info *mx3fbi; | | |
| 1393 | int ret; | | |
| 1394 | | | |
| 1395 | /* Allocate sufficient memory for the fb structure */ | | |
| 1396 | fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev); | | |
| 1397 | if (!fbi) | | |
| 1398 | return NULL; | | |
| 1399 | | | |
| 1400 | mx3fbi = fbi->par; | | |
| 1401 | mx3fbi->cookie = -EINVAL; | | |
| 1402 | mx3fbi->cur_ipu_buf = 0; | | |
| 1403 | | | |
| 1404 | fbi->var.activate = FB_ACTIVATE_NOW; | | |
| 1405 | | | |
| 1406 | fbi->fbops = ops; | | |
| 1407 | fbi->pseudo_palette = mx3fbi->pseudo_palette; | | |
| 1408 | | | |
| 1409 | mutex_init(&mx3fbi->mutex); | | |
| 1410 | | | |
| 1411 | /* Allocate colormap */ | | |
| 1412 | ret = fb_alloc_cmap(&fbi->cmap, 16, 0); | | |
| 1413 | if (ret < 0) { | | |
| 1414 | framebuffer_release(fbi); | | |
| 1415 | return NULL; | | |
| 1416 | } | | |
| 1417 | | | |
| 1418 | return fbi; | | |
| 1419 | } | | |
| 1420 | | | |
| 1421 | static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan) | | |
| 1422 | { | | |
| 1423 | struct device *dev = mx3fb->dev; | | |
| 1424 | struct mx3fb_platform_data *mx3fb_pdata = dev_get_platdata(dev); | | |
| 1425 | const char *name = mx3fb_pdata->name; | | |
| 1426 | struct fb_info *fbi; | | |
| 1427 | struct mx3fb_info *mx3fbi; | | |
| 1428 | const struct fb_videomode *mode; | | |
| 1429 | int ret, num_modes; | | |
| 1430 | | | |
| 1431 | if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) { | | |
| 1432 | dev_err(dev, "Illegal display data format %d\n", | | |
| 1433 | mx3fb_pdata->disp_data_fmt); | | |
| 1434 | return -EINVAL; | | |
| 1435 | } | | |
| 1436 | | | |
| 1437 | ichan->client = mx3fb; | | |
| 1438 | | | |
| 1439 | if (ichan->dma_chan.chan_id != IDMAC_SDC_0) | | |
| 1440 | return -EINVAL; | | |
| 1441 | | | |
| 1442 | fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops); | | |
| 1443 | if (!fbi) | | |
| 1444 | return -ENOMEM; | | |
| 1445 | | | |
| 1446 | if (!fb_mode) | | |
| 1447 | fb_mode = name; | | |
| 1448 | | | |
| 1449 | if (!fb_mode) { | | |
| 1450 | ret = -EINVAL; | | |
| 1451 | goto emode; | | |
| 1452 | } | | |
| 1453 | | | |
| 1454 | if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) { | | |
| 1455 | mode = mx3fb_pdata->mode; | | |
| 1456 | num_modes = mx3fb_pdata->num_modes; | | |
| 1457 | } else { | | |
| 1458 | mode = mx3fb_modedb; | | |
| 1459 | num_modes = ARRAY_SIZE(mx3fb_modedb); | | |
| 1460 | } | | |
| 1461 | | | |
| 1462 | if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode, | | |
| 1463 | num_modes, NULL, default_bpp)) { | | |
| 1464 | ret = -EBUSY; | | |
| 1465 | goto emode; | | |
| 1466 | } | | |
| 1467 | | | |
| 1468 | fb_videomode_to_modelist(mode, num_modes, &fbi->modelist); | | |
| 1469 | | | |
| 1470 | /* Default Y virtual size is 2x panel size */ | | |
| 1471 | fbi->var.yres_virtual = fbi->var.yres * 2; | | |
| 1472 | | | |
| 1473 | mx3fb->fbi = fbi; | | |
| 1474 | | | |
| 1475 | /* set Display Interface clock period */ | | |
| 1476 | mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER); | | |
| 1477 | /* Might need to trigger HSP clock change - see 44.3.3.8.5 */ | | |
| 1478 | | | |
| 1479 | sdc_set_brightness(mx3fb, 255); | | |
| 1480 | sdc_set_global_alpha(mx3fb, true, 0xFF); | | |
| 1481 | sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0); | | |
| 1482 | | | |
| 1483 | mx3fbi = fbi->par; | | |
| 1484 | mx3fbi->idmac_channel = ichan; | | |
| 1485 | mx3fbi->ipu_ch = ichan->dma_chan.chan_id; | | |
| 1486 | mx3fbi->mx3fb = mx3fb; | | |
| 1487 | mx3fbi->blank = FB_BLANK_NORMAL; | | |
| 1488 | | | |
| 1489 | mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt; | | |
| 1490 | | | |
| 1491 | init_completion(&mx3fbi->flip_cmpl); | | |
| 1492 | disable_irq(ichan->eof_irq); | | |
| 1493 | dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq); | | |
| 1494 | ret = __set_par(fbi, false); | | |
| 1495 | if (ret < 0) | | |
| 1496 | goto esetpar; | | |
| 1497 | | | |
| 1498 | __blank(FB_BLANK_UNBLANK, fbi); | | |
| 1499 | | | |
| 1500 | dev_info(dev, "registered, using mode %s\n", fb_mode); | | |
| 1501 | | | |
| 1502 | ret = register_framebuffer(fbi); | | |
| 1503 | if (ret < 0) | | |
| 1504 | goto erfb; | | |
| 1505 | | | |
| 1506 | return 0; | | |
| 1507 | | | |
| 1508 | erfb: | | |
| 1509 | esetpar: | | |
| 1510 | emode: | | |
| 1511 | fb_dealloc_cmap(&fbi->cmap); | | |
| 1512 | framebuffer_release(fbi); | | |
| 1513 | | | |
| 1514 | return ret; | | |
| 1515 | } | | |
| 1516 | | | |
| 1517 | static bool chan_filter(struct dma_chan *chan, void *arg) | | |
| 1518 | { | | |
| 1519 | struct dma_chan_request *rq = arg; | | |
| 1520 | struct device *dev; | | |
| 1521 | struct mx3fb_platform_data *mx3fb_pdata; | | |
| 1522 | | | |
| 1523 | if (!imx_dma_is_ipu(chan)) | | |
| 1524 | return false; | | |
| 1525 | | | |
| 1526 | if (!rq) | | |
| 1527 | return false; | | |
| 1528 | | | |
| 1529 | dev = rq->mx3fb->dev; | | |
| 1530 | mx3fb_pdata = dev_get_platdata(dev); | | |
| 1531 | | | |
| 1532 | return rq->id == chan->chan_id && | | |
| 1533 | mx3fb_pdata->dma_dev == chan->device->dev; | | |
| 1534 | } | | |
| 1535 | | | |
| 1536 | static void release_fbi(struct fb_info *fbi) | | |
| 1537 | { | | |
| 1538 | mx3fb_unmap_video_memory(fbi); | | |
| 1539 | | | |
| 1540 | fb_dealloc_cmap(&fbi->cmap); | | |
| 1541 | | | |
| 1542 | unregister_framebuffer(fbi); | | |
| 1543 | framebuffer_release(fbi); | | |
| 1544 | } | | |
| 1545 | | | |
| 1546 | static int mx3fb_probe(struct platform_device *pdev) | | |
| 1547 | { | | |
| 1548 | struct device *dev = &pdev->dev; | | |
| 1549 | int ret; | | |
| 1550 | struct resource *sdc_reg; | | |
| 1551 | struct mx3fb_data *mx3fb; | | |
| 1552 | dma_cap_mask_t mask; | | |
| 1553 | struct dma_chan *chan; | | |
| 1554 | struct dma_chan_request rq; | | |
| 1555 | | | |
| 1556 | /* | | |
| 1557 | * Display Interface (DI) and Synchronous Display Controller (SDC) | | |
| 1558 | * registers | | |
| 1559 | */ | | |
| 1560 | sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); | | |
| 1561 | if (!sdc_reg) | | |
| 1562 | return -EINVAL; | | |
| 1563 | | | |
| 1564 | mx3fb = devm_kzalloc(&pdev->dev, sizeof(*mx3fb), GFP_KERNEL); | | |
| 1565 | if (!mx3fb) | | |
| 1566 | return -ENOMEM; | | |
| 1567 | | | |
| 1568 | spin_lock_init(&mx3fb->lock); | | |
| 1569 | | | |
| 1570 | mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg)); | | |
| 1571 | if (!mx3fb->reg_base) { | | |
| 1572 | ret = -ENOMEM; | | |
| 1573 | goto eremap; | | |
| 1574 | } | | |
| 1575 | | | |
| 1576 | pr_debug("Remapped %pR at %p\n", sdc_reg, mx3fb->reg_base); | | |
| 1577 | | | |
| 1578 | /* IDMAC interface */ | | |
| 1579 | dmaengine_get(); | | |
| 1580 | | | |
| 1581 | mx3fb->dev = dev; | | |
| 1582 | platform_set_drvdata(pdev, mx3fb); | | |
| 1583 | | | |
| 1584 | rq.mx3fb = mx3fb; | | |
| 1585 | | | |
| 1586 | dma_cap_zero(mask); | | |
| 1587 | dma_cap_set(DMA_SLAVE, mask); | | |
| 1588 | dma_cap_set(DMA_PRIVATE, mask); | | |
| 1589 | rq.id = IDMAC_SDC_0; | | |
| 1590 | chan = dma_request_channel(mask, chan_filter, &rq); | | |
| 1591 | if (!chan) { | | |
| 1592 | ret = -EBUSY; | | |
| 1593 | goto ersdc0; | | |
| 1594 | } | | |
| 1595 | | | |
| 1596 | mx3fb->backlight_level = 255; | | |
| 1597 | | | |
| 1598 | ret = init_fb_chan(mx3fb, to_idmac_chan(chan)); | | |
| 1599 | if (ret < 0) | | |
| 1600 | goto eisdc0; | | |
| 1601 | | | |
| 1602 | mx3fb_init_backlight(mx3fb); | | |
| 1603 | | | |
| 1604 | return 0; | | |
| 1605 | | | |
| 1606 | eisdc0: | | |
| 1607 | dma_release_channel(chan); | | |
| 1608 | ersdc0: | | |
| 1609 | dmaengine_put(); | | |
| 1610 | iounmap(mx3fb->reg_base); | | |
| 1611 | eremap: | | |
| 1612 | dev_err(dev, "mx3fb: failed to register fb\n"); | | |
| 1613 | return ret; | | |
| 1614 | } | | |
| 1615 | | | |
| 1616 | static void mx3fb_remove(struct platform_device *dev) | | |
| 1617 | { | | |
| 1618 | struct mx3fb_data *mx3fb = platform_get_drvdata(dev); | | |
| 1619 | struct fb_info *fbi = mx3fb->fbi; | | |
| 1620 | struct mx3fb_info *mx3_fbi = fbi->par; | | |
| 1621 | struct dma_chan *chan; | | |
| 1622 | | | |
| 1623 | chan = &mx3_fbi->idmac_channel->dma_chan; | | |
| 1624 | release_fbi(fbi); | | |
| 1625 | | | |
| 1626 | mx3fb_exit_backlight(mx3fb); | | |
| 1627 | | | |
| 1628 | dma_release_channel(chan); | | |
| 1629 | dmaengine_put(); | | |
| 1630 | | | |
| 1631 | iounmap(mx3fb->reg_base); | | |
| 1632 | } | | |
| 1633 | | | |
| 1634 | static struct platform_driver mx3fb_driver = { | | |
| 1635 | .driver = { | | |
| 1636 | .name = MX3FB_NAME, | | |
| 1637 | }, | | |
| 1638 | .probe = mx3fb_probe, | | |
| 1639 | .remove_new = mx3fb_remove, | | |
| 1640 | .suspend = mx3fb_suspend, | | |
| 1641 | .resume = mx3fb_resume, | | |
| 1642 | }; | | |
| 1643 | | | |
| 1644 | /* | | |
| 1645 | * Parse user specified options (`video=mx3fb:') | | |
| 1646 | * example: | | |
| 1647 | * video=mx3fb:bpp=16 | | |
| 1648 | */ | | |
| 1649 | static int __init mx3fb_setup(void) | | |
| 1650 | { | | |
| 1651 | #ifndef MODULE | | |
| 1652 | char *opt, *options = NULL; | | |
| 1653 | | | |
| 1654 | if (fb_get_options("mx3fb", &options)) | | |
| 1655 | return -ENODEV; | | |
| 1656 | | | |
| 1657 | if (!options || !*options) | | |
| 1658 | return 0; | | |
| 1659 | | | |
| 1660 | while ((opt = strsep(&options, ",")) != NULL) { | | |
| 1661 | if (!*opt) | | |
| 1662 | continue; | | |
| 1663 | if (!strncmp(opt, "bpp=", 4)) | | |
| 1664 | default_bpp = simple_strtoul(opt + 4, NULL, 0); | | |
| 1665 | else | | |
| 1666 | fb_mode = opt; | | |
| 1667 | } | | |
| 1668 | #endif | | |
| 1669 | | | |
| 1670 | return 0; | | |
| 1671 | } | | |
| 1672 | | | |
| 1673 | static int __init mx3fb_init(void) | | |
| 1674 | { | | |
| 1675 | int ret = mx3fb_setup(); | | |
| 1676 | | | |
| 1677 | if (ret < 0) | | |
| 1678 | return ret; | | |
| 1679 | | | |
| 1680 | ret = platform_driver_register(&mx3fb_driver); | | |
| 1681 | return ret; | | |
| 1682 | } | | |
| 1683 | | | |
| 1684 | static void __exit mx3fb_exit(void) | | |
| 1685 | { | | |
| 1686 | platform_driver_unregister(&mx3fb_driver); | | |
| 1687 | } | | |
| 1688 | | | |
| 1689 | module_init(mx3fb_init); | | |
| 1690 | module_exit(mx3fb_exit); | | |
| 1691 | | | |
| 1692 | MODULE_AUTHOR("Freescale Semiconductor, Inc."); | | |
| 1693 | MODULE_DESCRIPTION("MX3 framebuffer driver"); | | |
| 1694 | MODULE_ALIAS("platform:" MX3FB_NAME); | | |
| 1695 | MODULE_LICENSE("GPL v2"); | | |