Felipe writes: USB: changes for v5.8 merge window Rather busy cycle. We have a total 99 non-merge commits going into v5.8 merge window. The majority of the changes are in dwc3 this around (31.7% of all changes). It's composed mostly Thinh's recent updates to get dwc3 to behave correctly with stream transfers. We have also have Roger's for Keystone platforms and Neil's updates for the meson glue layer. Apart from those, we have the usual set of non-critical fixes, new device IDs, spelling fixes all over the place. Signed-off-by: Felipe Balbi <balbi@kernel.org> * tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (99 commits) usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML usb: dwc3: gadget: Check for prepared TRBs usb: gadget: Fix issue with config_ep_by_speed function usb: cdns3: ep0: delete the redundant status stage usb: dwc2: Update Core Reset programming flow. usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe() usb: gadget: fix potential double-free in m66592_probe. usb: cdns3: Fix runtime PM imbalance on error usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check usb: dwc3: Increase timeout for CmdAct cleared by device controller USB: dummy-hcd: use configurable endpoint naming scheme usb: cdns3: gadget: assign interrupt number to USB gadget structure usb: gadget: core: sync interrupt before unbind the udc arm64: dts: qcom: sc7180: Add interconnect properties for USB arm64: dts: qcom: sdm845: Add interconnect properties for USB dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver ARM: dts: at91: Remove the USB EP child node dt-bindings: usb: atmel: Mark EP child node as deprecated ...
Showing the changes to include/linux (2 of 116 files). Show all
Unified · Split
| @@ -249,6 +249,9 @@ int usb_function_activate(struct usb_function *); · 248 unmodified lines | |||
| 249 | 249 | ||
| 250 | int usb_interface_id(struct usb_configuration *, struct usb_function *); | 250 | int usb_interface_id(struct usb_configuration *, struct usb_function *); |
| 251 | 251 | ||
| 252 | int config_ep_by_speed_and_alt(struct usb_gadget *g, struct usb_function *f, | ||
| 253 | struct usb_ep *_ep, u8 alt); | ||
| 254 | |||
| 252 | int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f, | 255 | int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f, |
| 253 | struct usb_ep *_ep); | 256 | struct usb_ep *_ep); |
| 254 | 257 | ||
| @@ -42,6 +42,8 @@ struct usb_ep; · 41 unmodified lines | |||
| 42 | * @num_mapped_sgs: number of SG entries mapped to DMA (internal) | 42 | * @num_mapped_sgs: number of SG entries mapped to DMA (internal) |
| 43 | * @length: Length of that data | 43 | * @length: Length of that data |
| 44 | * @stream_id: The stream id, when USB3.0 bulk streams are being used | 44 | * @stream_id: The stream id, when USB3.0 bulk streams are being used |
| 45 | * @is_last: Indicates if this is the last request of a stream_id before | ||
| 46 | * switching to a different stream (required for DWC3 controllers). | ||
| 45 | * @no_interrupt: If true, hints that no completion irq is needed. | 47 | * @no_interrupt: If true, hints that no completion irq is needed. |
| 46 | * Helpful sometimes with deep request queues that are handled | 48 | * Helpful sometimes with deep request queues that are handled |
| 47 | * directly by DMA controllers. | 49 | * directly by DMA controllers. |
| @@ -104,6 +106,7 @@ struct usb_request { · 56 unmodified lines | |||
| 104 | unsigned num_mapped_sgs; | 106 | unsigned num_mapped_sgs; |
| 105 | 107 | ||
| 106 | unsigned stream_id:16; | 108 | unsigned stream_id:16; |
| 109 | unsigned is_last:1; | ||
| 107 | unsigned no_interrupt:1; | 110 | unsigned no_interrupt:1; |
| 108 | unsigned zero:1; | 111 | unsigned zero:1; |
| 109 | unsigned short_not_ok:1; | 112 | unsigned short_not_ok:1; |
| @@ -373,6 +376,7 @@ struct usb_gadget_ops { · 263 unmodified lines | |||
| 373 | * @connected: True if gadget is connected. | 376 | * @connected: True if gadget is connected. |
| 374 | * @lpm_capable: If the gadget max_speed is FULL or HIGH, this flag | 377 | * @lpm_capable: If the gadget max_speed is FULL or HIGH, this flag |
| 375 | * indicates that it supports LPM as per the LPM ECN & errata. | 378 | * indicates that it supports LPM as per the LPM ECN & errata. |
| 379 | * @irq: the interrupt number for device controller. | ||
| 376 | * | 380 | * |
| 377 | * Gadgets have a mostly-portable "gadget driver" implementing device | 381 | * Gadgets have a mostly-portable "gadget driver" implementing device |
| 378 | * functions, handling all usb configurations and interfaces. Gadget | 382 | * functions, handling all usb configurations and interfaces. Gadget |
| @@ -427,6 +431,7 @@ struct usb_gadget { · 48 unmodified lines | |||
| 427 | unsigned deactivated:1; | 431 | unsigned deactivated:1; |
| 428 | unsigned connected:1; | 432 | unsigned connected:1; |
| 429 | unsigned lpm_capable:1; | 433 | unsigned lpm_capable:1; |
| 434 | int irq; | ||
| 430 | }; | 435 | }; |
| 431 | #define work_to_gadget(w) (container_of((w), struct usb_gadget, work)) | 436 | #define work_to_gadget(w) (container_of((w), struct usb_gadget, work)) |
| 432 | 437 | ||
| @@ -773,6 +778,9 @@ struct usb_gadget_string_container { · 340 unmodified lines | |||
| 773 | /* put descriptor for string with that id into buf (buflen >= 256) */ | 778 | /* put descriptor for string with that id into buf (buflen >= 256) */ |
| 774 | int usb_gadget_get_string(const struct usb_gadget_strings *table, int id, u8 *buf); | 779 | int usb_gadget_get_string(const struct usb_gadget_strings *table, int id, u8 *buf); |
| 775 | 780 | ||
| 781 | /* check if the given language identifier is valid */ | ||
| 782 | bool usb_validate_langid(u16 langid); | ||
| 783 | |||
| 776 | /*-------------------------------------------------------------------------*/ | 784 | /*-------------------------------------------------------------------------*/ |
| 777 | 785 | ||
| 778 | /* utility to simplify managing config descriptors */ | 786 | /* utility to simplify managing config descriptors */ |