Some motherboards have multiple HDA codecs connected to the serial bus. The current code may create multiple mixer controls with the almost identical identification. The current code use id.device field from the control element structure to store the codec address to avoid such clashes for multiple codecs. Unfortunately, the user space do not handle this correctly. For mixer controls, only name and index are used for the identifiers. This patch fixes this problem to compose the index using the codec address as an offset in case, when the control already exists. It is really unlikely that one codec will create 10 similar controls. This patch adds new kernel module parameter 'ctl_dev_id' to allow select the old behaviour, too. The CONFIG_SND_HDA_CTL_DEV_ID Kconfig option sets the default value.
Unified · Split
| @@ -259,6 +259,7 @@ struct hda_codec { · 258 unmodified lines | ||
| 259 | 259 | unsigned int relaxed_resume:1; /* don't resume forcibly for jack */ |
| 260 | 260 | unsigned int forced_resume:1; /* forced resume for jack */ |
| 261 | 261 | unsigned int no_stream_clean_at_suspend:1; /* do not clean streams at suspend */ |
| 262 | + unsigned int ctl_dev_id:1; /* old control element id build behaviour */ | |
| 262 | 263 | |
| 263 | 264 | #ifdef CONFIG_PM |
| 264 | 265 | unsigned long power_on_acct; |
| @@ -302,6 +302,20 @@ config SND_HDA_INTEL_HDMI_SILENT_STREAM · 301 unmodified lines | ||
| 302 | 302 | This feature can impact power consumption as resources |
| 303 | 303 | are kept reserved both at transmitter and receiver. |
| 304 | 304 | |
| 305 | +config SND_HDA_CTL_DEV_ID | |
| 306 | + bool "Use the device identifier field for controls" | |
| 307 | + depends on SND_HDA_INTEL | |
| 308 | + help | |
| 309 | + Say Y to use the device identifier field for (mixer) | |
| 310 | + controls (old behaviour until this option is available). | |
| 311 | + | |
| 312 | + When enabled, the multiple HDA codecs may set the device | |
| 313 | + field in control (mixer) element identifiers. The use | |
| 314 | + of this field is not recommended and defined for mixer controls. | |
| 315 | + | |
| 316 | + The old behaviour (Y) is obsolete and will be removed. Consider | |
| 317 | + to not enable this option. | |
| 318 | + | |
| 305 | 319 | endif |
| 306 | 320 | |
| 307 | 321 | endmenu |
| @@ -3389,7 +3389,12 @@ int snd_hda_add_new_ctls(struct hda_codec *codec, · 3388 unmodified lines | ||
| 3389 | 3389 | kctl = snd_ctl_new1(knew, codec); |
| 3390 | 3390 | if (!kctl) |
| 3391 | 3391 | return -ENOMEM; |
| 3392 | − if (addr > 0) | |
| 3392 | + /* Do not use the id.device field for MIXER elements. | |
| 3393 | + * This field is for real device numbers (like PCM) but codecs | |
| 3394 | + * are hidden components from the user space view (unrelated | |
| 3395 | + * to the mixer element identification). | |
| 3396 | + */ | |
| 3397 | + if (addr > 0 && codec->ctl_dev_id) | |
| 3393 | 3398 | kctl->id.device = addr; |
| 3394 | 3399 | if (idx > 0) |
| 3395 | 3400 | kctl->id.index = idx; |
| @@ -3400,9 +3405,11 @@ int snd_hda_add_new_ctls(struct hda_codec *codec, · 4 unmodified lines | ||
| 3400 | 3405 | * the codec addr; if it still fails (or it's the |
| 3401 | 3406 | * primary codec), then try another control index |
| 3402 | 3407 | */ |
| 3403 | − if (!addr && codec->core.addr) | |
| 3408 | + if (!addr && codec->core.addr) { | |
| 3404 | 3409 | addr = codec->core.addr; |
| 3405 | − else if (!idx && !knew->index) { | |
| 3410 | + if (!codec->ctl_dev_id) | |
| 3411 | + idx += 10 * addr; | |
| 3412 | + } else if (!idx && !knew->index) { | |
| 3406 | 3413 | idx = find_empty_mixer_ctl_idx(codec, |
| 3407 | 3414 | knew->name, 0); |
| 3408 | 3415 | if (idx <= 0) |
| @@ -1231,6 +1231,7 @@ int azx_probe_codecs(struct azx *chip, unsigned int max_slots) · 1230 unmodified lines | ||
| 1231 | 1231 | continue; |
| 1232 | 1232 | codec->jackpoll_interval = chip->jackpoll_interval; |
| 1233 | 1233 | codec->beep_mode = chip->beep_mode; |
| 1234 | + codec->ctl_dev_id = chip->ctl_dev_id; | |
| 1234 | 1235 | codecs++; |
| 1235 | 1236 | } |
| 1236 | 1237 | } |
| @@ -124,6 +124,7 @@ struct azx { · 123 unmodified lines | ||
| 124 | 124 | /* HD codec */ |
| 125 | 125 | int codec_probe_mask; /* copied from probe_mask option */ |
| 126 | 126 | unsigned int beep_mode; |
| 127 | + bool ctl_dev_id; | |
| 127 | 128 | |
| 128 | 129 | #ifdef CONFIG_SND_HDA_PATCH_LOADER |
| 129 | 130 | const struct firmware *fw; |
| @@ -119,6 +119,7 @@ static bool beep_mode[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = · 118 unmodified lines | ||
| 119 | 119 | CONFIG_SND_HDA_INPUT_BEEP_MODE}; |
| 120 | 120 | #endif |
| 121 | 121 | static bool dmic_detect = 1; |
| 122 | +static bool ctl_dev_id = IS_ENABLED(CONFIG_SND_HDA_CTL_DEV_ID) ? 1 : 0; | |
| 122 | 123 | |
| 123 | 124 | module_param_array(index, int, NULL, 0444); |
| 124 | 125 | MODULE_PARM_DESC(index, "Index value for Intel HD audio interface."); |
| @@ -157,6 +158,8 @@ module_param(dmic_detect, bool, 0444); · 32 unmodified lines | ||
| 157 | 158 | MODULE_PARM_DESC(dmic_detect, "Allow DSP driver selection (bypass this driver) " |
| 158 | 159 | "(0=off, 1=on) (default=1); " |
| 159 | 160 | "deprecated, use snd-intel-dspcfg.dsp_driver option instead"); |
| 161 | +module_param(ctl_dev_id, bool, 0444); | |
| 162 | +MODULE_PARM_DESC(ctl_dev_id, "Use control device identifier (based on codec address)."); | |
| 160 | 163 | |
| 161 | 164 | #ifdef CONFIG_PM |
| 162 | 165 | static int param_set_xint(const char *val, const struct kernel_param *kp); |
| @@ -2278,6 +2281,8 @@ static int azx_probe_continue(struct azx *chip) · 2115 unmodified lines | ||
| 2278 | 2281 | chip->beep_mode = beep_mode[dev]; |
| 2279 | 2282 | #endif |
| 2280 | 2283 | |
| 2284 | + chip->ctl_dev_id = ctl_dev_id; | |
| 2285 | + | |
| 2281 | 2286 | /* create codec instances */ |
| 2282 | 2287 | if (bus->codec_mask) { |
| 2283 | 2288 | err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]); |