| @@ -1,494 +0,0 @@ |
| 1 | /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ | | |
| 2 | /* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $ | | |
| 3 | * linux/include/linux/cyclades.h | | |
| 4 | * | | |
| 5 | * This file was initially written by | | |
| 6 | * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by | | |
| 7 | * Ivan Passos <ivan@cyclades.com>. | | |
| 8 | * | | |
| 9 | * This file contains the general definitions for the cyclades.c driver | | |
| 10 | *$Log: cyclades.h,v $ | | |
| 11 | *Revision 3.1 2002/01/29 11:36:16 henrique | | |
| 12 | *added throttle field on struct cyclades_port to indicate whether the | | |
| 13 | *port is throttled or not | | |
| 14 | * | | |
| 15 | *Revision 3.1 2000/04/19 18:52:52 ivan | | |
| 16 | *converted address fields to unsigned long and added fields for physical | | |
| 17 | *addresses on cyclades_card structure; | | |
| 18 | * | | |
| 19 | *Revision 3.0 1998/11/02 14:20:59 ivan | | |
| 20 | *added nports field on cyclades_card structure; | | |
| 21 | * | | |
| 22 | *Revision 2.5 1998/08/03 16:57:01 ivan | | |
| 23 | *added cyclades_idle_stats structure; | | |
| 24 | * | | |
| 25 | *Revision 2.4 1998/06/01 12:09:53 ivan | | |
| 26 | *removed closing_wait2 from cyclades_port structure; | | |
| 27 | * | | |
| 28 | *Revision 2.3 1998/03/16 18:01:12 ivan | | |
| 29 | *changes in the cyclades_port structure to get it closer to the | | |
| 30 | *standard serial port structure; | | |
| 31 | *added constants for new ioctls; | | |
| 32 | * | | |
| 33 | *Revision 2.2 1998/02/17 16:50:00 ivan | | |
| 34 | *changes in the cyclades_port structure (addition of shutdown_wait and | | |
| 35 | *chip_rev variables); | | |
| 36 | *added constants for new ioctls and for CD1400 rev. numbers. | | |
| 37 | * | | |
| 38 | *Revision 2.1 1997/10/24 16:03:00 ivan | | |
| 39 | *added rflow (which allows enabling the CD1400 special flow control | | |
| 40 | *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to | | |
| 41 | *cyclades_port structure; | | |
| 42 | *added Alpha support | | |
| 43 | * | | |
| 44 | *Revision 2.0 1997/06/30 10:30:00 ivan | | |
| 45 | *added some new doorbell command constants related to IOCTLW and | | |
| 46 | *UART error signaling | | |
| 47 | * | | |
| 48 | *Revision 1.8 1997/06/03 15:30:00 ivan | | |
| 49 | *added constant ZFIRM_HLT | | |
| 50 | *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin) | | |
| 51 | * | | |
| 52 | *Revision 1.7 1997/03/26 10:30:00 daniel | | |
| 53 | *new entries at the end of cyclades_port struct to reallocate | | |
| 54 | *variables illegally allocated within card memory. | | |
| 55 | * | | |
| 56 | *Revision 1.6 1996/09/09 18:35:30 bentson | | |
| 57 | *fold in changes for Cyclom-Z -- including structures for | | |
| 58 | *communicating with board as well modest changes to original | | |
| 59 | *structures to support new features. | | |
| 60 | * | | |
| 61 | *Revision 1.5 1995/11/13 21:13:31 bentson | | |
| 62 | *changes suggested by Michael Chastain <mec@duracef.shout.net> | | |
| 63 | *to support use of this file in non-kernel applications | | |
| 64 | * | | |
| 65 | * | | |
| 66 | */ | | |
| 67 | | | |
| 68 | #ifndef _UAPI_LINUX_CYCLADES_H | | |
| 69 | #define _UAPI_LINUX_CYCLADES_H | | |
| 70 | | | |
| 71 | #include <linux/types.h> | | |
| 72 | | | |
| 73 | struct cyclades_monitor { | | |
| 74 | unsigned long int_count; | | |
| 75 | unsigned long char_count; | | |
| 76 | unsigned long char_max; | | |
| 77 | unsigned long char_last; | | |
| 78 | }; | | |
| 79 | | | |
| 80 | /* | | |
| 81 | * These stats all reflect activity since the device was last initialized. | | |
| 82 | * (i.e., since the port was opened with no other processes already having it | | |
| 83 | * open) | | |
| 84 | */ | | |
| 85 | struct cyclades_idle_stats { | | |
| 86 | __kernel_old_time_t in_use; /* Time device has been in use (secs) */ | | |
| 87 | __kernel_old_time_t recv_idle; /* Time since last char received (secs) */ | | |
| 88 | __kernel_old_time_t xmit_idle; /* Time since last char transmitted (secs) */ | | |
| 89 | unsigned long recv_bytes; /* Bytes received */ | | |
| 90 | unsigned long xmit_bytes; /* Bytes transmitted */ | | |
| 91 | unsigned long overruns; /* Input overruns */ | | |
| 92 | unsigned long frame_errs; /* Input framing errors */ | | |
| 93 | unsigned long parity_errs; /* Input parity errors */ | | |
| 94 | }; | | |
| 95 | | | |
| 96 | #define CYCLADES_MAGIC 0x4359 | | |
| 97 | | | |
| 98 | #define CYGETMON 0x435901 | | |
| 99 | #define CYGETTHRESH 0x435902 | | |
| 100 | #define CYSETTHRESH 0x435903 | | |
| 101 | #define CYGETDEFTHRESH 0x435904 | | |
| 102 | #define CYSETDEFTHRESH 0x435905 | | |
| 103 | #define CYGETTIMEOUT 0x435906 | | |
| 104 | #define CYSETTIMEOUT 0x435907 | | |
| 105 | #define CYGETDEFTIMEOUT 0x435908 | | |
| 106 | #define CYSETDEFTIMEOUT 0x435909 | | |
| 107 | #define CYSETRFLOW 0x43590a | | |
| 108 | #define CYGETRFLOW 0x43590b | | |
| 109 | #define CYSETRTSDTR_INV 0x43590c | | |
| 110 | #define CYGETRTSDTR_INV 0x43590d | | |
| 111 | #define CYZSETPOLLCYCLE 0x43590e | | |
| 112 | #define CYZGETPOLLCYCLE 0x43590f | | |
| 113 | #define CYGETCD1400VER 0x435910 | | |
| 114 | #define CYSETWAIT 0x435912 | | |
| 115 | #define CYGETWAIT 0x435913 | | |
| 116 | | | |
| 117 | /*************** CYCLOM-Z ADDITIONS ***************/ | | |
| 118 | | | |
| 119 | #define CZIOC ('M' << 8) | | |
| 120 | #define CZ_NBOARDS (CZIOC|0xfa) | | |
| 121 | #define CZ_BOOT_START (CZIOC|0xfb) | | |
| 122 | #define CZ_BOOT_DATA (CZIOC|0xfc) | | |
| 123 | #define CZ_BOOT_END (CZIOC|0xfd) | | |
| 124 | #define CZ_TEST (CZIOC|0xfe) | | |
| 125 | | | |
| 126 | #define CZ_DEF_POLL (HZ/25) | | |
| 127 | | | |
| 128 | #define MAX_BOARD 4 /* Max number of boards */ | | |
| 129 | #define MAX_DEV 256 /* Max number of ports total */ | | |
| 130 | #define CYZ_MAX_SPEED 921600 | | |
| 131 | | | |
| 132 | #define CYZ_FIFO_SIZE 16 | | |
| 133 | | | |
| 134 | #define CYZ_BOOT_NWORDS 0x100 | | |
| 135 | struct CYZ_BOOT_CTRL { | | |
| 136 | unsigned short nboard; | | |
| 137 | int status[MAX_BOARD]; | | |
| 138 | int nchannel[MAX_BOARD]; | | |
| 139 | int fw_rev[MAX_BOARD]; | | |
| 140 | unsigned long offset; | | |
| 141 | unsigned long data[CYZ_BOOT_NWORDS]; | | |
| 142 | }; | | |
| 143 | | | |
| 144 | | | |
| 145 | #ifndef DP_WINDOW_SIZE | | |
| 146 | /* | | |
| 147 | * Memory Window Sizes | | |
| 148 | */ | | |
| 149 | | | |
| 150 | #define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */ | | |
| 151 | #define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and | | |
| 152 | 8Zo V.2 */ | | |
| 153 | #define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */ | | |
| 154 | | | |
| 155 | /* | | |
| 156 | * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver | | |
| 157 | * normally will access only interested on the fpga_id, fpga_version, | | |
| 158 | * start_cpu and stop_cpu. | | |
| 159 | */ | | |
| 160 | | | |
| 161 | struct CUSTOM_REG { | | |
| 162 | __u32 fpga_id; /* FPGA Identification Register */ | | |
| 163 | __u32 fpga_version; /* FPGA Version Number Register */ | | |
| 164 | __u32 cpu_start; /* CPU start Register (write) */ | | |
| 165 | __u32 cpu_stop; /* CPU stop Register (write) */ | | |
| 166 | __u32 misc_reg; /* Miscellaneous Register */ | | |
| 167 | __u32 idt_mode; /* IDT mode Register */ | | |
| 168 | __u32 uart_irq_status; /* UART IRQ status Register */ | | |
| 169 | __u32 clear_timer0_irq; /* Clear timer interrupt Register */ | | |
| 170 | __u32 clear_timer1_irq; /* Clear timer interrupt Register */ | | |
| 171 | __u32 clear_timer2_irq; /* Clear timer interrupt Register */ | | |
| 172 | __u32 test_register; /* Test Register */ | | |
| 173 | __u32 test_count; /* Test Count Register */ | | |
| 174 | __u32 timer_select; /* Timer select register */ | | |
| 175 | __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */ | | |
| 176 | __u32 ram_wait_state; /* RAM wait-state Register */ | | |
| 177 | __u32 uart_wait_state; /* UART wait-state Register */ | | |
| 178 | __u32 timer_wait_state; /* timer wait-state Register */ | | |
| 179 | __u32 ack_wait_state; /* ACK wait State Register */ | | |
| 180 | }; | | |
| 181 | | | |
| 182 | /* | | |
| 183 | * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime | | |
| 184 | * registers. This structure can be used to access the 9060 registers | | |
| 185 | * (memory mapped). | | |
| 186 | */ | | |
| 187 | | | |
| 188 | struct RUNTIME_9060 { | | |
| 189 | __u32 loc_addr_range; /* 00h - Local Address Range */ | | |
| 190 | __u32 loc_addr_base; /* 04h - Local Address Base */ | | |
| 191 | __u32 loc_arbitr; /* 08h - Local Arbitration */ | | |
| 192 | __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */ | | |
| 193 | __u32 loc_rom_range; /* 10h - Local ROM Range */ | | |
| 194 | __u32 loc_rom_base; /* 14h - Local ROM Base */ | | |
| 195 | __u32 loc_bus_descr; /* 18h - Local Bus descriptor */ | | |
| 196 | __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */ | | |
| 197 | __u32 loc_base_mst; /* 20h - Local Base for Master PCI */ | | |
| 198 | __u32 loc_range_io; /* 24h - Local Range for Master IO */ | | |
| 199 | __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */ | | |
| 200 | __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */ | | |
| 201 | __u32 filler1; /* 30h */ | | |
| 202 | __u32 filler2; /* 34h */ | | |
| 203 | __u32 filler3; /* 38h */ | | |
| 204 | __u32 filler4; /* 3Ch */ | | |
| 205 | __u32 mail_box_0; /* 40h - Mail Box 0 */ | | |
| 206 | __u32 mail_box_1; /* 44h - Mail Box 1 */ | | |
| 207 | __u32 mail_box_2; /* 48h - Mail Box 2 */ | | |
| 208 | __u32 mail_box_3; /* 4Ch - Mail Box 3 */ | | |
| 209 | __u32 filler5; /* 50h */ | | |
| 210 | __u32 filler6; /* 54h */ | | |
| 211 | __u32 filler7; /* 58h */ | | |
| 212 | __u32 filler8; /* 5Ch */ | | |
| 213 | __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */ | | |
| 214 | __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */ | | |
| 215 | __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */ | | |
| 216 | __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */ | | |
| 217 | }; | | |
| 218 | | | |
| 219 | /* Values for the Local Base Address re-map register */ | | |
| 220 | | | |
| 221 | #define WIN_RAM 0x00000001L /* set the sliding window to RAM */ | | |
| 222 | #define WIN_CREG 0x14000001L /* set the window to custom Registers */ | | |
| 223 | | | |
| 224 | /* Values timer select registers */ | | |
| 225 | | | |
| 226 | #define TIMER_BY_1M 0x00 /* clock divided by 1M */ | | |
| 227 | #define TIMER_BY_256K 0x01 /* clock divided by 256k */ | | |
| 228 | #define TIMER_BY_128K 0x02 /* clock divided by 128k */ | | |
| 229 | #define TIMER_BY_32K 0x03 /* clock divided by 32k */ | | |
| 230 | | | |
| 231 | /****************** ****************** *******************/ | | |
| 232 | #endif | | |
| 233 | | | |
| 234 | #ifndef ZFIRM_ID | | |
| 235 | /* #include "zfwint.h" */ | | |
| 236 | /****************** ****************** *******************/ | | |
| 237 | /* | | |
| 238 | * This file contains the definitions for interfacing with the | | |
| 239 | * Cyclom-Z ZFIRM Firmware. | | |
| 240 | */ | | |
| 241 | | | |
| 242 | /* General Constant definitions */ | | |
| 243 | | | |
| 244 | #define MAX_CHAN 64 /* max number of channels per board */ | | |
| 245 | | | |
| 246 | /* firmware id structure (set after boot) */ | | |
| 247 | | | |
| 248 | #define ID_ADDRESS 0x00000180L /* signature/pointer address */ | | |
| 249 | #define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */ | | |
| 250 | #define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */ | | |
| 251 | #define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */ | | |
| 252 | | | |
| 253 | #define ZF_TINACT_DEF 1000 /* default inactivity timeout | | |
| 254 | (1000 ms) */ | | |
| 255 | #define ZF_TINACT ZF_TINACT_DEF | | |
| 256 | | | |
| 257 | struct FIRM_ID { | | |
| 258 | __u32 signature; /* ZFIRM/U signature */ | | |
| 259 | __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */ | | |
| 260 | }; | | |
| 261 | | | |
| 262 | /* Op. System id */ | | |
| 263 | | | |
| 264 | #define C_OS_LINUX 0x00000030 /* generic Linux system */ | | |
| 265 | | | |
| 266 | /* channel op_mode */ | | |
| 267 | | | |
| 268 | #define C_CH_DISABLE 0x00000000 /* channel is disabled */ | | |
| 269 | #define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */ | | |
| 270 | #define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */ | | |
| 271 | #define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */ | | |
| 272 | #define C_CH_LOOPBACK 0x00000004 /* Loopback mode */ | | |
| 273 | | | |
| 274 | /* comm_parity - parity */ | | |
| 275 | | | |
| 276 | #define C_PR_NONE 0x00000000 /* None */ | | |
| 277 | #define C_PR_ODD 0x00000001 /* Odd */ | | |
| 278 | #define C_PR_EVEN 0x00000002 /* Even */ | | |
| 279 | #define C_PR_MARK 0x00000004 /* Mark */ | | |
| 280 | #define C_PR_SPACE 0x00000008 /* Space */ | | |
| 281 | #define C_PR_PARITY 0x000000ff | | |
| 282 | | | |
| 283 | #define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */ | | |
| 284 | #define C_PR_IGNORE 0x00000200 /* ignore frame/par error */ | | |
| 285 | | | |
| 286 | /* comm_data_l - data length and stop bits */ | | |
| 287 | | | |
| 288 | #define C_DL_CS5 0x00000001 | | |
| 289 | #define C_DL_CS6 0x00000002 | | |
| 290 | #define C_DL_CS7 0x00000004 | | |
| 291 | #define C_DL_CS8 0x00000008 | | |
| 292 | #define C_DL_CS 0x0000000f | | |
| 293 | #define C_DL_1STOP 0x00000010 | | |
| 294 | #define C_DL_15STOP 0x00000020 | | |
| 295 | #define C_DL_2STOP 0x00000040 | | |
| 296 | #define C_DL_STOP 0x000000f0 | | |
| 297 | | | |
| 298 | /* interrupt enabling/status */ | | |
| 299 | | | |
| 300 | #define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */ | | |
| 301 | #define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */ | | |
| 302 | #define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */ | | |
| 303 | #define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */ | | |
| 304 | #define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */ | | |
| 305 | #define C_IN_MDCD 0x00000100 /* modem DCD change */ | | |
| 306 | #define C_IN_MDSR 0x00000200 /* modem DSR change */ | | |
| 307 | #define C_IN_MRI 0x00000400 /* modem RI change */ | | |
| 308 | #define C_IN_MCTS 0x00000800 /* modem CTS change */ | | |
| 309 | #define C_IN_RXBRK 0x00001000 /* Break received */ | | |
| 310 | #define C_IN_PR_ERROR 0x00002000 /* parity error */ | | |
| 311 | #define C_IN_FR_ERROR 0x00004000 /* frame error */ | | |
| 312 | #define C_IN_OVR_ERROR 0x00008000 /* overrun error */ | | |
| 313 | #define C_IN_RXOFL 0x00010000 /* RX buffer overflow */ | | |
| 314 | #define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */ | | |
| 315 | #define C_IN_MRTS 0x00040000 /* modem RTS drop */ | | |
| 316 | #define C_IN_ICHAR 0x00080000 | | |
| 317 | | | |
| 318 | /* flow control */ | | |
| 319 | | | |
| 320 | #define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */ | | |
| 321 | #define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */ | | |
| 322 | #define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */ | | |
| 323 | #define C_FL_SWFLOW 0x0000000f | | |
| 324 | | | |
| 325 | /* flow status */ | | |
| 326 | | | |
| 327 | #define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */ | | |
| 328 | #define C_FS_SENDING 0x00000001 /* UART is sending data */ | | |
| 329 | #define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */ | | |
| 330 | | | |
| 331 | /* rs_control/rs_status RS-232 signals */ | | |
| 332 | | | |
| 333 | #define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in | | |
| 334 | IOCTLM command */ | | |
| 335 | #define C_RS_RTS 0x00000001 /* RTS */ | | |
| 336 | #define C_RS_DTR 0x00000004 /* DTR */ | | |
| 337 | #define C_RS_DCD 0x00000100 /* CD */ | | |
| 338 | #define C_RS_DSR 0x00000200 /* DSR */ | | |
| 339 | #define C_RS_RI 0x00000400 /* RI */ | | |
| 340 | #define C_RS_CTS 0x00000800 /* CTS */ | | |
| 341 | | | |
| 342 | /* commands Host <-> Board */ | | |
| 343 | | | |
| 344 | #define C_CM_RESET 0x01 /* reset/flush buffers */ | | |
| 345 | #define C_CM_IOCTL 0x02 /* re-read CH_CTRL */ | | |
| 346 | #define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */ | | |
| 347 | #define C_CM_IOCTLM 0x04 /* RS-232 outputs change */ | | |
| 348 | #define C_CM_SENDXOFF 0x10 /* send Xoff */ | | |
| 349 | #define C_CM_SENDXON 0x11 /* send Xon */ | | |
| 350 | #define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */ | | |
| 351 | #define C_CM_SENDBRK 0x41 /* send break */ | | |
| 352 | #define C_CM_INTBACK 0x42 /* Interrupt back */ | | |
| 353 | #define C_CM_SET_BREAK 0x43 /* Tx break on */ | | |
| 354 | #define C_CM_CLR_BREAK 0x44 /* Tx break off */ | | |
| 355 | #define C_CM_CMD_DONE 0x45 /* Previous command done */ | | |
| 356 | #define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */ | | |
| 357 | #define C_CM_TINACT 0x51 /* set inactivity detection */ | | |
| 358 | #define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */ | | |
| 359 | #define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */ | | |
| 360 | #define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */ | | |
| 361 | #define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */ | | |
| 362 | #define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */ | | |
| 363 | #define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */ | | |
| 364 | #define C_CM_Q_ENABLE 0x58 /* enables queue access from the | | |
| 365 | driver */ | | |
| 366 | #define C_CM_Q_DISABLE 0x59 /* disables queue access from the | | |
| 367 | driver */ | | |
| 368 | | | |
| 369 | #define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */ | | |
| 370 | #define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */ | | |
| 371 | #define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */ | | |
| 372 | #define C_CM_RXNNDT 0x63 /* rx no new data timeout */ | | |
| 373 | #define C_CM_TXFEMPTY 0x64 | | |
| 374 | #define C_CM_ICHAR 0x65 | | |
| 375 | #define C_CM_MDCD 0x70 /* modem DCD change */ | | |
| 376 | #define C_CM_MDSR 0x71 /* modem DSR change */ | | |
| 377 | #define C_CM_MRI 0x72 /* modem RI change */ | | |
| 378 | #define C_CM_MCTS 0x73 /* modem CTS change */ | | |
| 379 | #define C_CM_MRTS 0x74 /* modem RTS drop */ | | |
| 380 | #define C_CM_RXBRK 0x84 /* Break received */ | | |
| 381 | #define C_CM_PR_ERROR 0x85 /* Parity error */ | | |
| 382 | #define C_CM_FR_ERROR 0x86 /* Frame error */ | | |
| 383 | #define C_CM_OVR_ERROR 0x87 /* Overrun error */ | | |
| 384 | #define C_CM_RXOFL 0x88 /* RX buffer overflow */ | | |
| 385 | #define C_CM_CMDERROR 0x90 /* command error */ | | |
| 386 | #define C_CM_FATAL 0x91 /* fatal error */ | | |
| 387 | #define C_CM_HW_RESET 0x92 /* reset board */ | | |
| 388 | | | |
| 389 | /* | | |
| 390 | * CH_CTRL - This per port structure contains all parameters | | |
| 391 | * that control an specific port. It can be seen as the | | |
| 392 | * configuration registers of a "super-serial-controller". | | |
| 393 | */ | | |
| 394 | | | |
| 395 | struct CH_CTRL { | | |
| 396 | __u32 op_mode; /* operation mode */ | | |
| 397 | __u32 intr_enable; /* interrupt masking */ | | |
| 398 | __u32 sw_flow; /* SW flow control */ | | |
| 399 | __u32 flow_status; /* output flow status */ | | |
| 400 | __u32 comm_baud; /* baud rate - numerically specified */ | | |
| 401 | __u32 comm_parity; /* parity */ | | |
| 402 | __u32 comm_data_l; /* data length/stop */ | | |
| 403 | __u32 comm_flags; /* other flags */ | | |
| 404 | __u32 hw_flow; /* HW flow control */ | | |
| 405 | __u32 rs_control; /* RS-232 outputs */ | | |
| 406 | __u32 rs_status; /* RS-232 inputs */ | | |
| 407 | __u32 flow_xon; /* xon char */ | | |
| 408 | __u32 flow_xoff; /* xoff char */ | | |
| 409 | __u32 hw_overflow; /* hw overflow counter */ | | |
| 410 | __u32 sw_overflow; /* sw overflow counter */ | | |
| 411 | __u32 comm_error; /* frame/parity error counter */ | | |
| 412 | __u32 ichar; | | |
| 413 | __u32 filler[7]; | | |
| 414 | }; | | |
| 415 | | | |
| 416 | | | |
| 417 | /* | | |
| 418 | * BUF_CTRL - This per channel structure contains | | |
| 419 | * all Tx and Rx buffer control for a given channel. | | |
| 420 | */ | | |
| 421 | | | |
| 422 | struct BUF_CTRL { | | |
| 423 | __u32 flag_dma; /* buffers are in Host memory */ | | |
| 424 | __u32 tx_bufaddr; /* address of the tx buffer */ | | |
| 425 | __u32 tx_bufsize; /* tx buffer size */ | | |
| 426 | __u32 tx_threshold; /* tx low water mark */ | | |
| 427 | __u32 tx_get; /* tail index tx buf */ | | |
| 428 | __u32 tx_put; /* head index tx buf */ | | |
| 429 | __u32 rx_bufaddr; /* address of the rx buffer */ | | |
| 430 | __u32 rx_bufsize; /* rx buffer size */ | | |
| 431 | __u32 rx_threshold; /* rx high water mark */ | | |
| 432 | __u32 rx_get; /* tail index rx buf */ | | |
| 433 | __u32 rx_put; /* head index rx buf */ | | |
| 434 | __u32 filler[5]; /* filler to align structures */ | | |
| 435 | }; | | |
| 436 | | | |
| 437 | /* | | |
| 438 | * BOARD_CTRL - This per board structure contains all global | | |
| 439 | * control fields related to the board. | | |
| 440 | */ | | |
| 441 | | | |
| 442 | struct BOARD_CTRL { | | |
| 443 | | | |
| 444 | /* static info provided by the on-board CPU */ | | |
| 445 | __u32 n_channel; /* number of channels */ | | |
| 446 | __u32 fw_version; /* firmware version */ | | |
| 447 | | | |
| 448 | /* static info provided by the driver */ | | |
| 449 | __u32 op_system; /* op_system id */ | | |
| 450 | __u32 dr_version; /* driver version */ | | |
| 451 | | | |
| 452 | /* board control area */ | | |
| 453 | __u32 inactivity; /* inactivity control */ | | |
| 454 | | | |
| 455 | /* host to FW commands */ | | |
| 456 | __u32 hcmd_channel; /* channel number */ | | |
| 457 | __u32 hcmd_param; /* pointer to parameters */ | | |
| 458 | | | |
| 459 | /* FW to Host commands */ | | |
| 460 | __u32 fwcmd_channel; /* channel number */ | | |
| 461 | __u32 fwcmd_param; /* pointer to parameters */ | | |
| 462 | __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */ | | |
| 463 | | | |
| 464 | /* filler so the structures are aligned */ | | |
| 465 | __u32 filler[6]; | | |
| 466 | }; | | |
| 467 | | | |
| 468 | /* Host Interrupt Queue */ | | |
| 469 | | | |
| 470 | #define QUEUE_SIZE (10*MAX_CHAN) | | |
| 471 | | | |
| 472 | struct INT_QUEUE { | | |
| 473 | unsigned char intr_code[QUEUE_SIZE]; | | |
| 474 | unsigned long channel[QUEUE_SIZE]; | | |
| 475 | unsigned long param[QUEUE_SIZE]; | | |
| 476 | unsigned long put; | | |
| 477 | unsigned long get; | | |
| 478 | }; | | |
| 479 | | | |
| 480 | /* | | |
| 481 | * ZFW_CTRL - This is the data structure that includes all other | | |
| 482 | * data structures used by the Firmware. | | |
| 483 | */ | | |
| 484 | | | |
| 485 | struct ZFW_CTRL { | | |
| 486 | struct BOARD_CTRL board_ctrl; | | |
| 487 | struct CH_CTRL ch_ctrl[MAX_CHAN]; | | |
| 488 | struct BUF_CTRL buf_ctrl[MAX_CHAN]; | | |
| 489 | }; | | |
| 490 | | | |
| 491 | /****************** ****************** *******************/ | | |
| 492 | #endif | | |
| 493 | | | |
| 494 | #endif /* _UAPI_LINUX_CYCLADES_H */ | | |