These bindings support the GPIO controllers found on the Qualcomm Atheros AR7xxx/AR9XXX SoC.
Unified · Split
| @@ -0,0 +1,38 @@ | |||
| 1 | Binding for Qualcomm Atheros AR7xxx/AR9xxx GPIO controller | ||
| 2 | |||
| 3 | Required properties: | ||
| 4 | - compatible: has to be "qca,<soctype>-gpio" and one of the following | ||
| 5 | fallbacks: | ||
| 6 | - "qca,ar7100-gpio" | ||
| 7 | - "qca,ar9340-gpio" | ||
| 8 | - reg: Base address and size of the controllers memory area | ||
| 9 | - gpio-controller : Marks the device node as a GPIO controller. | ||
| 10 | - #gpio-cells : Should be two. The first cell is the pin number and the | ||
| 11 | second cell is used to specify optional parameters. | ||
| 12 | - ngpios: Should be set to the number of GPIOs available on the SoC. | ||
| 13 | |||
| 14 | Optional properties: | ||
| 15 | - interrupt-parent: phandle of the parent interrupt controller. | ||
| 16 | - interrupts: Interrupt specifier for the controllers interrupt. | ||
| 17 | - interrupt-controller : Identifies the node as an interrupt controller | ||
| 18 | - #interrupt-cells : Specifies the number of cells needed to encode interrupt | ||
| 19 | source, should be 2 | ||
| 20 | |||
| 21 | Please refer to interrupts.txt in this directory for details of the common | ||
| 22 | Interrupt Controllers bindings used by client devices. | ||
| 23 | |||
| 24 | Example: | ||
| 25 | |||
| 26 | gpio@18040000 { | ||
| 27 | compatible = "qca,ar9132-gpio", "qca,ar7100-gpio"; | ||
| 28 | reg = <0x18040000 0x30>; | ||
| 29 | interrupts = <2>; | ||
| 30 | |||
| 31 | ngpios = <22>; | ||
| 32 | |||
| 33 | gpio-controller; | ||
| 34 | #gpio-cells = <2>; | ||
| 35 | |||
| 36 | interrupt-controller; | ||
| 37 | #interrupt-cells = <2>; | ||
| 38 | }; | ||