After enabling per-cpu processing it appeared that under heavy load changing MTU can result in blocking all port's interrupts and transmitting data is not possible after the change. This commit fixes above issue by disabling percpu interrupts for the time, when TXQs and RXQs are reconfigured.
Unified · Split
| @@ -3042,6 +3042,20 @@ static int mvneta_check_mtu_valid(struct net_device *dev, int mtu) · 3041 unmodified lines | ||
| 3042 | 3042 | return mtu; |
| 3043 | 3043 | } |
| 3044 | 3044 | |
| 3045 | +static void mvneta_percpu_enable(void *arg) | |
| 3046 | +{ | |
| 3047 | + struct mvneta_port *pp = arg; | |
| 3048 | + | |
| 3049 | + enable_percpu_irq(pp->dev->irq, IRQ_TYPE_NONE); | |
| 3050 | +} | |
| 3051 | + | |
| 3052 | +static void mvneta_percpu_disable(void *arg) | |
| 3053 | +{ | |
| 3054 | + struct mvneta_port *pp = arg; | |
| 3055 | + | |
| 3056 | + disable_percpu_irq(pp->dev->irq); | |
| 3057 | +} | |
| 3058 | + | |
| 3045 | 3059 | /* Change the device mtu */ |
| 3046 | 3060 | static int mvneta_change_mtu(struct net_device *dev, int mtu) |
| 3047 | 3061 | { |
| @@ -3066,6 +3080,7 @@ static int mvneta_change_mtu(struct net_device *dev, int mtu) · 18 unmodified lines | ||
| 3066 | 3080 | * reallocation of the queues |
| 3067 | 3081 | */ |
| 3068 | 3082 | mvneta_stop_dev(pp); |
| 3083 | + on_each_cpu(mvneta_percpu_disable, pp, true); | |
| 3069 | 3084 | |
| 3070 | 3085 | mvneta_cleanup_txqs(pp); |
| 3071 | 3086 | mvneta_cleanup_rxqs(pp); |
| @@ -3089,6 +3104,7 @@ static int mvneta_change_mtu(struct net_device *dev, int mtu) · 17 unmodified lines | ||
| 3089 | 3104 | return ret; |
| 3090 | 3105 | } |
| 3091 | 3106 | |
| 3107 | + on_each_cpu(mvneta_percpu_enable, pp, true); | |
| 3092 | 3108 | mvneta_start_dev(pp); |
| 3093 | 3109 | mvneta_port_up(pp); |
| 3094 | 3110 | |
| @@ -3242,20 +3258,6 @@ static void mvneta_mdio_remove(struct mvneta_port *pp) · 147 unmodified lines | ||
| 3242 | 3258 | pp->phy_dev = NULL; |
| 3243 | 3259 | } |
| 3244 | 3260 | |
| 3245 | −static void mvneta_percpu_enable(void *arg) | |
| 3246 | −{ | |
| 3247 | − struct mvneta_port *pp = arg; | |
| 3248 | − | |
| 3249 | − enable_percpu_irq(pp->dev->irq, IRQ_TYPE_NONE); | |
| 3250 | −} | |
| 3251 | − | |
| 3252 | −static void mvneta_percpu_disable(void *arg) | |
| 3253 | −{ | |
| 3254 | − struct mvneta_port *pp = arg; | |
| 3255 | − | |
| 3256 | − disable_percpu_irq(pp->dev->irq); | |
| 3257 | −} | |
| 3258 | − | |
| 3259 | 3261 | /* Electing a CPU must be done in an atomic way: it should be done |
| 3260 | 3262 | * after or before the removal/insertion of a CPU and this function is |
| 3261 | 3263 | * not reentrant. |