Showing the changes to include/linux/platform_data (16 of 10364 files). Show all
Unified · Split
| @@ -46,18 +46,6 @@ struct at91_cf_data { · 45 unmodified lines | ||
| 46 | 46 | #define AT91_IDE_SWAP_A0_A2 0x02 |
| 47 | 47 | }; |
| 48 | 48 | |
| 49 | − /* USB Host */ | |
| 50 | −#define AT91_MAX_USBH_PORTS 3 | |
| 51 | −struct at91_usbh_data { | |
| 52 | − int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ | |
| 53 | − int overcurrent_pin[AT91_MAX_USBH_PORTS]; | |
| 54 | − u8 ports; /* number of ports on root hub */ | |
| 55 | − u8 overcurrent_supported; | |
| 56 | − u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; | |
| 57 | − u8 overcurrent_status[AT91_MAX_USBH_PORTS]; | |
| 58 | − u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; | |
| 59 | −}; | |
| 60 | − | |
| 61 | 49 | /* NAND / SmartMedia */ |
| 62 | 50 | struct atmel_nand_data { |
| 63 | 51 | int enable_pin; /* chip enable */ |
| @@ -0,0 +1,31 @@ | ||
| 1 | +/* | |
| 2 | + * Atmel maXTouch Touchscreen driver | |
| 3 | + * | |
| 4 | + * Copyright (C) 2010 Samsung Electronics Co.Ltd | |
| 5 | + * Author: Joonyoung Shim <jy0922.shim@samsung.com> | |
| 6 | + * | |
| 7 | + * This program is free software; you can redistribute it and/or modify it | |
| 8 | + * under the terms of the GNU General Public License as published by the | |
| 9 | + * Free Software Foundation; either version 2 of the License, or (at your | |
| 10 | + * option) any later version. | |
| 11 | + */ | |
| 12 | + | |
| 13 | +#ifndef __LINUX_PLATFORM_DATA_ATMEL_MXT_TS_H | |
| 14 | +#define __LINUX_PLATFORM_DATA_ATMEL_MXT_TS_H | |
| 15 | + | |
| 16 | +#include <linux/types.h> | |
| 17 | + | |
| 18 | +enum mxt_suspend_mode { | |
| 19 | + MXT_SUSPEND_DEEP_SLEEP = 0, | |
| 20 | + MXT_SUSPEND_T9_CTRL = 1, | |
| 21 | +}; | |
| 22 | + | |
| 23 | +/* The platform data for the Atmel maXTouch touchscreen driver */ | |
| 24 | +struct mxt_platform_data { | |
| 25 | + unsigned long irqflags; | |
| 26 | + u8 t19_num_keys; | |
| 27 | + const unsigned int *t19_keymap; | |
| 28 | + enum mxt_suspend_mode suspend_mode; | |
| 29 | +}; | |
| 30 | + | |
| 31 | +#endif /* __LINUX_PLATFORM_DATA_ATMEL_MXT_TS_H */ | |
| @@ -10,14 +10,8 @@ · 9 unmodified lines | ||
| 10 | 10 | #ifndef __CLK_UX500_H |
| 11 | 11 | #define __CLK_UX500_H |
| 12 | 12 | |
| 13 | −void u8500_of_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, | |
| 14 | − u32 clkrst5_base, u32 clkrst6_base); | |
| 15 | − | |
| 16 | −void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, | |
| 17 | − u32 clkrst5_base, u32 clkrst6_base); | |
| 18 | −void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, | |
| 19 | − u32 clkrst5_base, u32 clkrst6_base); | |
| 20 | −void u8540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, | |
| 21 | − u32 clkrst5_base, u32 clkrst6_base); | |
| 13 | +void u8500_clk_init(void); | |
| 14 | +void u9540_clk_init(void); | |
| 15 | +void u8540_clk_init(void); | |
| 22 | 16 | |
| 23 | 17 | #endif /* __CLK_UX500_H */ |
| @@ -1,11 +0,0 @@ | ||
| 1 | −#ifndef __GPIO_EM_H__ | |
| 2 | −#define __GPIO_EM_H__ | |
| 3 | − | |
| 4 | −struct gpio_em_config { | |
| 5 | − unsigned int gpio_base; | |
| 6 | − unsigned int irq_base; | |
| 7 | − unsigned int number_of_pins; | |
| 8 | − const char *pctl_name; | |
| 9 | −}; | |
| 10 | − | |
| 11 | −#endif /* __GPIO_EM_H__ */ | |
| @@ -0,0 +1,44 @@ | ||
| 1 | +/* | |
| 2 | + * I2C multiplexer using a single register | |
| 3 | + * | |
| 4 | + * Copyright 2015 Freescale Semiconductor | |
| 5 | + * York Sun <yorksun@freescale.com> | |
| 6 | + * | |
| 7 | + * This program is free software; you can redistribute it and/or modify it | |
| 8 | + * under the terms of the GNU General Public License as published by the | |
| 9 | + * Free Software Foundation; either version 2 of the License, or (at your | |
| 10 | + * option) any later version. | |
| 11 | + */ | |
| 12 | + | |
| 13 | +#ifndef __LINUX_PLATFORM_DATA_I2C_MUX_REG_H | |
| 14 | +#define __LINUX_PLATFORM_DATA_I2C_MUX_REG_H | |
| 15 | + | |
| 16 | +/** | |
| 17 | + * struct i2c_mux_reg_platform_data - Platform-dependent data for i2c-mux-reg | |
| 18 | + * @parent: Parent I2C bus adapter number | |
| 19 | + * @base_nr: Base I2C bus number to number adapters from or zero for dynamic | |
| 20 | + * @values: Array of value for each channel | |
| 21 | + * @n_values: Number of multiplexer channels | |
| 22 | + * @little_endian: Indicating if the register is in little endian | |
| 23 | + * @write_only: Reading the register is not allowed by hardware | |
| 24 | + * @classes: Optional I2C auto-detection classes | |
| 25 | + * @idle: Value to write to mux when idle | |
| 26 | + * @idle_in_use: indicate if idle value is in use | |
| 27 | + * @reg: Virtual address of the register to switch channel | |
| 28 | + * @reg_size: register size in bytes | |
| 29 | + */ | |
| 30 | +struct i2c_mux_reg_platform_data { | |
| 31 | + int parent; | |
| 32 | + int base_nr; | |
| 33 | + const unsigned int *values; | |
| 34 | + int n_values; | |
| 35 | + bool little_endian; | |
| 36 | + bool write_only; | |
| 37 | + const unsigned int *classes; | |
| 38 | + u32 idle; | |
| 39 | + bool idle_in_use; | |
| 40 | + void __iomem *reg; | |
| 41 | + resource_size_t reg_size; | |
| 42 | +}; | |
| 43 | + | |
| 44 | +#endif /* __LINUX_PLATFORM_DATA_I2C_MUX_REG_H */ | |
| @@ -0,0 +1,19 @@ | ||
| 1 | +/* | |
| 2 | + * Platform data for the Intel TCO Watchdog | |
| 3 | + */ | |
| 4 | + | |
| 5 | +#ifndef _ITCO_WDT_H_ | |
| 6 | +#define _ITCO_WDT_H_ | |
| 7 | + | |
| 8 | +/* Watchdog resources */ | |
| 9 | +#define ICH_RES_IO_TCO 0 | |
| 10 | +#define ICH_RES_IO_SMI 1 | |
| 11 | +#define ICH_RES_MEM_OFF 2 | |
| 12 | +#define ICH_RES_MEM_GCS_PMC 0 | |
| 13 | + | |
| 14 | +struct itco_wdt_platform_data { | |
| 15 | + char name[32]; | |
| 16 | + unsigned int version; | |
| 17 | +}; | |
| 18 | + | |
| 19 | +#endif /* _ITCO_WDT_H_ */ | |
| @@ -9,11 +9,25 @@ · 8 unmodified lines | ||
| 9 | 9 | #ifndef __LEDS_KIRKWOOD_NS2_H |
| 10 | 10 | #define __LEDS_KIRKWOOD_NS2_H |
| 11 | 11 | |
| 12 | +enum ns2_led_modes { | |
| 13 | + NS_V2_LED_OFF, | |
| 14 | + NS_V2_LED_ON, | |
| 15 | + NS_V2_LED_SATA, | |
| 16 | +}; | |
| 17 | + | |
| 18 | +struct ns2_led_modval { | |
| 19 | + enum ns2_led_modes mode; | |
| 20 | + int cmd_level; | |
| 21 | + int slow_level; | |
| 22 | +}; | |
| 23 | + | |
| 12 | 24 | struct ns2_led { |
| 13 | 25 | const char *name; |
| 14 | 26 | const char *default_trigger; |
| 15 | 27 | unsigned cmd; |
| 16 | 28 | unsigned slow; |
| 29 | + int num_modes; | |
| 30 | + struct ns2_led_modval *modval; | |
| 17 | 31 | }; |
| 18 | 32 | |
| 19 | 33 | struct ns2_led_platform_data { |
| @@ -136,7 +136,6 @@ struct lp855x_rom_data { · 135 unmodified lines | ||
| 136 | 136 | Only valid when mode is PWM_BASED. |
| 137 | 137 | * @size_program : total size of lp855x_rom_data |
| 138 | 138 | * @rom_data : list of new eeprom/eprom registers |
| 139 | − * @supply : regulator that supplies 3V input | |
| 140 | 139 | */ |
| 141 | 140 | struct lp855x_platform_data { |
| 142 | 141 | const char *name; |
| @@ -145,7 +144,6 @@ struct lp855x_platform_data { · 2 unmodified lines | ||
| 145 | 144 | unsigned int period_ns; |
| 146 | 145 | int size_program; |
| 147 | 146 | struct lp855x_rom_data *rom_data; |
| 148 | − struct regulator *supply; | |
| 149 | 147 | }; |
| 150 | 148 | |
| 151 | 149 | #endif |
| @@ -8,11 +8,19 @@ · 7 unmodified lines | ||
| 8 | 8 | #ifndef __MACB_PDATA_H__ |
| 9 | 9 | #define __MACB_PDATA_H__ |
| 10 | 10 | |
| 11 | +/** | |
| 12 | + * struct macb_platform_data - platform data for MACB Ethernet | |
| 13 | + * @phy_mask: phy mask passed when register the MDIO bus | |
| 14 | + * within the driver | |
| 15 | + * @phy_irq_pin: PHY IRQ | |
| 16 | + * @is_rmii: using RMII interface? | |
| 17 | + * @rev_eth_addr: reverse Ethernet address byte order | |
| 18 | + */ | |
| 11 | 19 | struct macb_platform_data { |
| 12 | 20 | u32 phy_mask; |
| 13 | − int phy_irq_pin; /* PHY IRQ */ | |
| 14 | − u8 is_rmii; /* using RMII interface? */ | |
| 15 | − u8 rev_eth_addr; /* reverse Ethernet address byte order */ | |
| 21 | + int phy_irq_pin; | |
| 22 | + u8 is_rmii; | |
| 23 | + u8 rev_eth_addr; | |
| 16 | 24 | }; |
| 17 | 25 | |
| 18 | 26 | #endif /* __MACB_PDATA_H__ */ |
| @@ -43,8 +43,8 @@ struct esdhc_platform_data { · 42 unmodified lines | ||
| 43 | 43 | enum wp_types wp_type; |
| 44 | 44 | enum cd_types cd_type; |
| 45 | 45 | int max_bus_width; |
| 46 | − unsigned int f_max; | |
| 47 | 46 | bool support_vsel; |
| 48 | 47 | unsigned int delay_line; |
| 48 | + unsigned int tuning_step; /* The delay cell steps in tuning procedure */ | |
| 49 | 49 | }; |
| 50 | 50 | #endif /* __ASM_ARCH_IMX_ESDHC_H */ |
| @@ -0,0 +1,63 @@ | ||
| 1 | +#ifndef _PIXCIR_I2C_TS_H | |
| 2 | +#define _PIXCIR_I2C_TS_H | |
| 3 | + | |
| 4 | +/* | |
| 5 | + * Register map | |
| 6 | + */ | |
| 7 | +#define PIXCIR_REG_POWER_MODE 51 | |
| 8 | +#define PIXCIR_REG_INT_MODE 52 | |
| 9 | + | |
| 10 | +/* | |
| 11 | + * Power modes: | |
| 12 | + * active: max scan speed | |
| 13 | + * idle: lower scan speed with automatic transition to active on touch | |
| 14 | + * halt: datasheet says sleep but this is more like halt as the chip | |
| 15 | + * clocks are cut and it can only be brought out of this mode | |
| 16 | + * using the RESET pin. | |
| 17 | + */ | |
| 18 | +enum pixcir_power_mode { | |
| 19 | + PIXCIR_POWER_ACTIVE, | |
| 20 | + PIXCIR_POWER_IDLE, | |
| 21 | + PIXCIR_POWER_HALT, | |
| 22 | +}; | |
| 23 | + | |
| 24 | +#define PIXCIR_POWER_MODE_MASK 0x03 | |
| 25 | +#define PIXCIR_POWER_ALLOW_IDLE (1UL << 2) | |
| 26 | + | |
| 27 | +/* | |
| 28 | + * Interrupt modes: | |
| 29 | + * periodical: interrupt is asserted periodicaly | |
| 30 | + * diff coordinates: interrupt is asserted when coordinates change | |
| 31 | + * level on touch: interrupt level asserted during touch | |
| 32 | + * pulse on touch: interrupt pulse asserted druing touch | |
| 33 | + * | |
| 34 | + */ | |
| 35 | +enum pixcir_int_mode { | |
| 36 | + PIXCIR_INT_PERIODICAL, | |
| 37 | + PIXCIR_INT_DIFF_COORD, | |
| 38 | + PIXCIR_INT_LEVEL_TOUCH, | |
| 39 | + PIXCIR_INT_PULSE_TOUCH, | |
| 40 | +}; | |
| 41 | + | |
| 42 | +#define PIXCIR_INT_MODE_MASK 0x03 | |
| 43 | +#define PIXCIR_INT_ENABLE (1UL << 3) | |
| 44 | +#define PIXCIR_INT_POL_HIGH (1UL << 2) | |
| 45 | + | |
| 46 | +/** | |
| 47 | + * struct pixcir_irc_chip_data - chip related data | |
| 48 | + * @max_fingers: Max number of fingers reported simultaneously by h/w | |
| 49 | + * @has_hw_ids: Hardware supports finger tracking IDs | |
| 50 | + * | |
| 51 | + */ | |
| 52 | +struct pixcir_i2c_chip_data { | |
| 53 | + u8 max_fingers; | |
| 54 | + bool has_hw_ids; | |
| 55 | +}; | |
| 56 | + | |
| 57 | +struct pixcir_ts_platform_data { | |
| 58 | + int x_max; | |
| 59 | + int y_max; | |
| 60 | + struct pixcir_i2c_chip_data chip; | |
| 61 | +}; | |
| 62 | + | |
| 63 | +#endif | |
| @@ -49,6 +49,7 @@ struct davinci_spi_platform_data { · 48 unmodified lines | ||
| 49 | 49 | u8 num_chipselect; |
| 50 | 50 | u8 intr_line; |
| 51 | 51 | u8 *chip_sel; |
| 52 | + u8 prescaler_limit; | |
| 52 | 53 | bool cshold_bug; |
| 53 | 54 | enum dma_event_q dma_event_q; |
| 54 | 55 | }; |
| @@ -0,0 +1,20 @@ | ||
| 1 | +/* | |
| 2 | + * MTK SPI bus driver definitions | |
| 3 | + * | |
| 4 | + * Copyright (c) 2015 MediaTek Inc. | |
| 5 | + * Author: Leilk Liu <leilk.liu@mediatek.com> | |
| 6 | + * | |
| 7 | + * This program is free software; you can redistribute it and/or modify | |
| 8 | + * it under the terms of the GNU General Public License version 2 as | |
| 9 | + * published by the Free Software Foundation. | |
| 10 | + */ | |
| 11 | + | |
| 12 | +#ifndef ____LINUX_PLATFORM_DATA_SPI_MTK_H | |
| 13 | +#define ____LINUX_PLATFORM_DATA_SPI_MTK_H | |
| 14 | + | |
| 15 | +/* Board specific platform_data */ | |
| 16 | +struct mtk_chip_config { | |
| 17 | + u32 tx_mlsb; | |
| 18 | + u32 rx_mlsb; | |
| 19 | +}; | |
| 20 | +#endif | |
| @@ -1,29 +0,0 @@ | ||
| 1 | −/* | |
| 2 | − * Driver include for ST NCI NFC chip family. | |
| 3 | − * | |
| 4 | − * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved. | |
| 5 | − * | |
| 6 | − * This program is free software; you can redistribute it and/or modify it | |
| 7 | − * under the terms and conditions of the GNU General Public License, | |
| 8 | − * version 2, as published by the Free Software Foundation. | |
| 9 | − * | |
| 10 | − * This program is distributed in the hope that it will be useful, | |
| 11 | − * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 12 | − * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 13 | − * GNU General Public License for more details. | |
| 14 | − * | |
| 15 | − * You should have received a copy of the GNU General Public License | |
| 16 | − * along with this program; if not, see <http://www.gnu.org/licenses/>. | |
| 17 | − */ | |
| 18 | − | |
| 19 | −#ifndef _ST_NCI_H_ | |
| 20 | −#define _ST_NCI_H_ | |
| 21 | − | |
| 22 | −#define ST_NCI_DRIVER_NAME "st_nci" | |
| 23 | − | |
| 24 | −struct st_nci_nfc_platform_data { | |
| 25 | − unsigned int gpio_reset; | |
| 26 | − unsigned int irq_polarity; | |
| 27 | −}; | |
| 28 | − | |
| 29 | −#endif /* _ST_NCI_H_ */ | |
| @@ -2,11 +2,8 @@ · 1 unmodified line | ||
| 2 | 2 | #define __VIDEO_EP93XX_H |
| 3 | 3 | |
| 4 | 4 | struct platform_device; |
| 5 | −struct fb_videomode; | |
| 6 | 5 | struct fb_info; |
| 7 | 6 | |
| 8 | −#define EP93XXFB_USE_MODEDB 0 | |
| 9 | − | |
| 10 | 7 | /* VideoAttributes flags */ |
| 11 | 8 | #define EP93XXFB_STATE_MACHINE_ENABLE (1 << 0) |
| 12 | 9 | #define EP93XXFB_PIXEL_CLOCK_ENABLE (1 << 1) |
| @@ -38,12 +35,7 @@ struct fb_info; · 25 unmodified lines | ||
| 38 | 35 | EP93XXFB_PIXEL_DATA_ENABLE) |
| 39 | 36 | |
| 40 | 37 | struct ep93xxfb_mach_info { |
| 41 | − unsigned int num_modes; | |
| 42 | − const struct fb_videomode *modes; | |
| 43 | − const struct fb_videomode *default_mode; | |
| 44 | − int bpp; | |
| 45 | 38 | unsigned int flags; |
| 46 | − | |
| 47 | 39 | int (*setup)(struct platform_device *pdev); |
| 48 | 40 | void (*teardown)(struct platform_device *pdev); |
| 49 | 41 | void (*blank)(int blank_mode, struct fb_info *info); |
| @@ -16,9 +16,6 @@ · 15 unmodified lines | ||
| 16 | 16 | #define _LINUX_INPUT_ZFORCE_TS_H |
| 17 | 17 | |
| 18 | 18 | struct zforce_ts_platdata { |
| 19 | − int gpio_int; | |
| 20 | − int gpio_rst; | |
| 21 | − | |
| 22 | 19 | unsigned int x_max; |
| 23 | 20 | unsigned int y_max; |
| 24 | 21 | }; |