| @@ -1,268 +0,0 @@ |
| 1 | // SPDX-License-Identifier: GPL-2.0-or-later | | |
| 2 | /* | | |
| 3 | * Touchkey driver for MELFAS MCS5000/5080 controller | | |
| 4 | * | | |
| 5 | * Copyright (C) 2010 Samsung Electronics Co.Ltd | | |
| 6 | * Author: HeungJun Kim <riverful.kim@samsung.com> | | |
| 7 | * Author: Joonyoung Shim <jy0922.shim@samsung.com> | | |
| 8 | */ | | |
| 9 | | | |
| 10 | #include <linux/module.h> | | |
| 11 | #include <linux/i2c.h> | | |
| 12 | #include <linux/interrupt.h> | | |
| 13 | #include <linux/input.h> | | |
| 14 | #include <linux/irq.h> | | |
| 15 | #include <linux/slab.h> | | |
| 16 | #include <linux/platform_data/mcs.h> | | |
| 17 | #include <linux/pm.h> | | |
| 18 | | | |
| 19 | /* MCS5000 Touchkey */ | | |
| 20 | #define MCS5000_TOUCHKEY_STATUS 0x04 | | |
| 21 | #define MCS5000_TOUCHKEY_STATUS_PRESS 7 | | |
| 22 | #define MCS5000_TOUCHKEY_FW 0x0a | | |
| 23 | #define MCS5000_TOUCHKEY_BASE_VAL 0x61 | | |
| 24 | | | |
| 25 | /* MCS5080 Touchkey */ | | |
| 26 | #define MCS5080_TOUCHKEY_STATUS 0x00 | | |
| 27 | #define MCS5080_TOUCHKEY_STATUS_PRESS 3 | | |
| 28 | #define MCS5080_TOUCHKEY_FW 0x01 | | |
| 29 | #define MCS5080_TOUCHKEY_BASE_VAL 0x1 | | |
| 30 | | | |
| 31 | enum mcs_touchkey_type { | | |
| 32 | MCS5000_TOUCHKEY, | | |
| 33 | MCS5080_TOUCHKEY, | | |
| 34 | }; | | |
| 35 | | | |
| 36 | struct mcs_touchkey_chip { | | |
| 37 | unsigned int status_reg; | | |
| 38 | unsigned int pressbit; | | |
| 39 | unsigned int press_invert; | | |
| 40 | unsigned int baseval; | | |
| 41 | }; | | |
| 42 | | | |
| 43 | struct mcs_touchkey_data { | | |
| 44 | void (*poweron)(bool); | | |
| 45 | | | |
| 46 | struct i2c_client *client; | | |
| 47 | struct input_dev *input_dev; | | |
| 48 | struct mcs_touchkey_chip chip; | | |
| 49 | unsigned int key_code; | | |
| 50 | unsigned int key_val; | | |
| 51 | unsigned short keycodes[]; | | |
| 52 | }; | | |
| 53 | | | |
| 54 | static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id) | | |
| 55 | { | | |
| 56 | struct mcs_touchkey_data *data = dev_id; | | |
| 57 | struct mcs_touchkey_chip *chip = &data->chip; | | |
| 58 | struct i2c_client *client = data->client; | | |
| 59 | struct input_dev *input = data->input_dev; | | |
| 60 | unsigned int key_val; | | |
| 61 | unsigned int pressed; | | |
| 62 | int val; | | |
| 63 | | | |
| 64 | val = i2c_smbus_read_byte_data(client, chip->status_reg); | | |
| 65 | if (val < 0) { | | |
| 66 | dev_err(&client->dev, "i2c read error [%d]\n", val); | | |
| 67 | goto out; | | |
| 68 | } | | |
| 69 | | | |
| 70 | pressed = (val & (1 << chip->pressbit)) >> chip->pressbit; | | |
| 71 | if (chip->press_invert) | | |
| 72 | pressed ^= chip->press_invert; | | |
| 73 | | | |
| 74 | /* key_val is 0 when released, so we should use key_val of press. */ | | |
| 75 | if (pressed) { | | |
| 76 | key_val = val & (0xff >> (8 - chip->pressbit)); | | |
| 77 | if (!key_val) | | |
| 78 | goto out; | | |
| 79 | key_val -= chip->baseval; | | |
| 80 | data->key_code = data->keycodes[key_val]; | | |
| 81 | data->key_val = key_val; | | |
| 82 | } | | |
| 83 | | | |
| 84 | input_event(input, EV_MSC, MSC_SCAN, data->key_val); | | |
| 85 | input_report_key(input, data->key_code, pressed); | | |
| 86 | input_sync(input); | | |
| 87 | | | |
| 88 | dev_dbg(&client->dev, "key %d %d %s\n", data->key_val, data->key_code, | | |
| 89 | pressed ? "pressed" : "released"); | | |
| 90 | | | |
| 91 | out: | | |
| 92 | return IRQ_HANDLED; | | |
| 93 | } | | |
| 94 | | | |
| 95 | static void mcs_touchkey_poweroff(void *data) | | |
| 96 | { | | |
| 97 | struct mcs_touchkey_data *touchkey = data; | | |
| 98 | | | |
| 99 | touchkey->poweron(false); | | |
| 100 | } | | |
| 101 | | | |
| 102 | static int mcs_touchkey_probe(struct i2c_client *client) | | |
| 103 | { | | |
| 104 | const struct i2c_device_id *id = i2c_client_get_device_id(client); | | |
| 105 | const struct mcs_platform_data *pdata; | | |
| 106 | struct mcs_touchkey_data *data; | | |
| 107 | struct input_dev *input_dev; | | |
| 108 | unsigned int fw_reg; | | |
| 109 | int fw_ver; | | |
| 110 | int error; | | |
| 111 | int i; | | |
| 112 | | | |
| 113 | pdata = dev_get_platdata(&client->dev); | | |
| 114 | if (!pdata) { | | |
| 115 | dev_err(&client->dev, "no platform data defined\n"); | | |
| 116 | return -EINVAL; | | |
| 117 | } | | |
| 118 | | | |
| 119 | data = devm_kzalloc(&client->dev, | | |
| 120 | struct_size(data, keycodes, pdata->key_maxval + 1), | | |
| 121 | GFP_KERNEL); | | |
| 122 | if (!data) | | |
| 123 | return -ENOMEM; | | |
| 124 | | | |
| 125 | input_dev = devm_input_allocate_device(&client->dev); | | |
| 126 | if (!input_dev) { | | |
| 127 | dev_err(&client->dev, "Failed to allocate input device\n"); | | |
| 128 | return -ENOMEM; | | |
| 129 | } | | |
| 130 | | | |
| 131 | data->client = client; | | |
| 132 | data->input_dev = input_dev; | | |
| 133 | | | |
| 134 | if (id->driver_data == MCS5000_TOUCHKEY) { | | |
| 135 | data->chip.status_reg = MCS5000_TOUCHKEY_STATUS; | | |
| 136 | data->chip.pressbit = MCS5000_TOUCHKEY_STATUS_PRESS; | | |
| 137 | data->chip.baseval = MCS5000_TOUCHKEY_BASE_VAL; | | |
| 138 | fw_reg = MCS5000_TOUCHKEY_FW; | | |
| 139 | } else { | | |
| 140 | data->chip.status_reg = MCS5080_TOUCHKEY_STATUS; | | |
| 141 | data->chip.pressbit = MCS5080_TOUCHKEY_STATUS_PRESS; | | |
| 142 | data->chip.press_invert = 1; | | |
| 143 | data->chip.baseval = MCS5080_TOUCHKEY_BASE_VAL; | | |
| 144 | fw_reg = MCS5080_TOUCHKEY_FW; | | |
| 145 | } | | |
| 146 | | | |
| 147 | fw_ver = i2c_smbus_read_byte_data(client, fw_reg); | | |
| 148 | if (fw_ver < 0) { | | |
| 149 | dev_err(&client->dev, "i2c read error[%d]\n", fw_ver); | | |
| 150 | return fw_ver; | | |
| 151 | } | | |
| 152 | dev_info(&client->dev, "Firmware version: %d\n", fw_ver); | | |
| 153 | | | |
| 154 | input_dev->name = "MELFAS MCS Touchkey"; | | |
| 155 | input_dev->id.bustype = BUS_I2C; | | |
| 156 | input_dev->evbit[0] = BIT_MASK(EV_KEY); | | |
| 157 | if (!pdata->no_autorepeat) | | |
| 158 | input_dev->evbit[0] |= BIT_MASK(EV_REP); | | |
| 159 | input_dev->keycode = data->keycodes; | | |
| 160 | input_dev->keycodesize = sizeof(data->keycodes[0]); | | |
| 161 | input_dev->keycodemax = pdata->key_maxval + 1; | | |
| 162 | | | |
| 163 | for (i = 0; i < pdata->keymap_size; i++) { | | |
| 164 | unsigned int val = MCS_KEY_VAL(pdata->keymap[i]); | | |
| 165 | unsigned int code = MCS_KEY_CODE(pdata->keymap[i]); | | |
| 166 | | | |
| 167 | data->keycodes[val] = code; | | |
| 168 | __set_bit(code, input_dev->keybit); | | |
| 169 | } | | |
| 170 | | | |
| 171 | input_set_capability(input_dev, EV_MSC, MSC_SCAN); | | |
| 172 | input_set_drvdata(input_dev, data); | | |
| 173 | | | |
| 174 | if (pdata->cfg_pin) | | |
| 175 | pdata->cfg_pin(); | | |
| 176 | | | |
| 177 | if (pdata->poweron) { | | |
| 178 | data->poweron = pdata->poweron; | | |
| 179 | data->poweron(true); | | |
| 180 | | | |
| 181 | error = devm_add_action_or_reset(&client->dev, | | |
| 182 | mcs_touchkey_poweroff, data); | | |
| 183 | if (error) | | |
| 184 | return error; | | |
| 185 | } | | |
| 186 | | | |
| 187 | error = devm_request_threaded_irq(&client->dev, client->irq, | | |
| 188 | NULL, mcs_touchkey_interrupt, | | |
| 189 | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, | | |
| 190 | client->dev.driver->name, data); | | |
| 191 | if (error) { | | |
| 192 | dev_err(&client->dev, "Failed to register interrupt\n"); | | |
| 193 | return error; | | |
| 194 | } | | |
| 195 | | | |
| 196 | error = input_register_device(input_dev); | | |
| 197 | if (error) | | |
| 198 | return error; | | |
| 199 | | | |
| 200 | i2c_set_clientdata(client, data); | | |
| 201 | return 0; | | |
| 202 | } | | |
| 203 | | | |
| 204 | static void mcs_touchkey_shutdown(struct i2c_client *client) | | |
| 205 | { | | |
| 206 | struct mcs_touchkey_data *data = i2c_get_clientdata(client); | | |
| 207 | | | |
| 208 | if (data->poweron) | | |
| 209 | data->poweron(false); | | |
| 210 | } | | |
| 211 | | | |
| 212 | static int mcs_touchkey_suspend(struct device *dev) | | |
| 213 | { | | |
| 214 | struct mcs_touchkey_data *data = dev_get_drvdata(dev); | | |
| 215 | struct i2c_client *client = data->client; | | |
| 216 | | | |
| 217 | /* Disable the work */ | | |
| 218 | disable_irq(client->irq); | | |
| 219 | | | |
| 220 | /* Finally turn off the power */ | | |
| 221 | if (data->poweron) | | |
| 222 | data->poweron(false); | | |
| 223 | | | |
| 224 | return 0; | | |
| 225 | } | | |
| 226 | | | |
| 227 | static int mcs_touchkey_resume(struct device *dev) | | |
| 228 | { | | |
| 229 | struct mcs_touchkey_data *data = dev_get_drvdata(dev); | | |
| 230 | struct i2c_client *client = data->client; | | |
| 231 | | | |
| 232 | /* Enable the device first */ | | |
| 233 | if (data->poweron) | | |
| 234 | data->poweron(true); | | |
| 235 | | | |
| 236 | /* Enable irq again */ | | |
| 237 | enable_irq(client->irq); | | |
| 238 | | | |
| 239 | return 0; | | |
| 240 | } | | |
| 241 | | | |
| 242 | static DEFINE_SIMPLE_DEV_PM_OPS(mcs_touchkey_pm_ops, | | |
| 243 | mcs_touchkey_suspend, mcs_touchkey_resume); | | |
| 244 | | | |
| 245 | static const struct i2c_device_id mcs_touchkey_id[] = { | | |
| 246 | { "mcs5000_touchkey", MCS5000_TOUCHKEY }, | | |
| 247 | { "mcs5080_touchkey", MCS5080_TOUCHKEY }, | | |
| 248 | { } | | |
| 249 | }; | | |
| 250 | MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id); | | |
| 251 | | | |
| 252 | static struct i2c_driver mcs_touchkey_driver = { | | |
| 253 | .driver = { | | |
| 254 | .name = "mcs_touchkey", | | |
| 255 | .pm = pm_sleep_ptr(&mcs_touchkey_pm_ops), | | |
| 256 | }, | | |
| 257 | .probe = mcs_touchkey_probe, | | |
| 258 | .shutdown = mcs_touchkey_shutdown, | | |
| 259 | .id_table = mcs_touchkey_id, | | |
| 260 | }; | | |
| 261 | | | |
| 262 | module_i2c_driver(mcs_touchkey_driver); | | |
| 263 | | | |
| 264 | /* Module information */ | | |
| 265 | MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); | | |
| 266 | MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>"); | | |
| 267 | MODULE_DESCRIPTION("Touchkey driver for MELFAS MCS5000/5080 controller"); | | |
| 268 | MODULE_LICENSE("GPL"); | | |