Merge tag 'mac80211-next-for-davem-2017-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says: ==================== Work continues in various areas: * port authorized event for 4-way-HS offload (Avi) * enable MFP optional for such devices (Emmanuel) * Kees's timer setup patch for mac80211 mesh (the part that isn't trivially scripted) * improve VLAN vs. TXQ handling (myself) * load regulatory database as firmware file (myself) * with various other small improvements and cleanups I merged net-next once in the meantime to allow Kees's timer setup patch to go in. ====================

David S. Miller committed 9 years ago

Commit df2fd382 parents b822696 90a53e447 files · +1277 −898Browse files

Showing the changes to include/uapi/linux (1 of 47 files). Show all

Unified · Split

include/uapi/linux/nl80211.h+65−17

  *	authentication/association or not receiving a response from the AP.
  *	Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
  *	well to remain backwards compatible.
- * @NL80211_CMD_ROAM: notifcation indicating the card/driver roamed by itself.
+ *	When establishing a security association, drivers that support 4 way
- *	When the driver roamed in a network that requires 802.1X authentication,
+ *	handshake offload should send %NL80211_CMD_PORT_AUTHORIZED event when
- *	%NL80211_ATTR_PORT_AUTHORIZED should be set if the 802.1X authentication
+ *	the 4 way handshake is completed successfully.
- *	was done by the driver or if roaming was done using Fast Transition
+ * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself.
- *	protocol (in which case 802.1X authentication is not needed). If
+ *	When a security association was established with the new AP (e.g. if
- *	%NL80211_ATTR_PORT_AUTHORIZED is not set, user space is responsible for
+ *	the FT protocol was used for roaming or the driver completed the 4 way
- *	the 802.1X authentication.
+ *	handshake), this event should be followed by an
+ *	%NL80211_CMD_PORT_AUTHORIZED event.
  * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
  *	userspace that a connection was dropped by the AP or due to other
  *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
  * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
  *	configured PMK for the authenticator address identified by
  *	&NL80211_ATTR_MAC.
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way
+ *	handshake was completed successfully by the driver. The BSSID is
+ *	specified with &NL80211_ATTR_MAC. Drivers that support 4 way handshake
+ *	offload should send this event after indicating 802.11 association with
+ *	&NL80211_CMD_CONNECT or &NL80211_CMD_ROAM. If the 4 way handshake failed
+ *	&NL80211_CMD_DISCONNECT should be indicated instead.
+ *
+ * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
  *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
 	NL80211_CMD_SET_PMK,
 	NL80211_CMD_DEL_PMK,
+	NL80211_CMD_PORT_AUTHORIZED,
+	NL80211_CMD_RELOAD_REGDB,
 	/* add new commands above here */
 	/* used to define NL80211_CMD_MAX below */
  *
  * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
  *	used for the association (&enum nl80211_mfp, represented as a u32);
- *	this attribute can be used
+ *	this attribute can be used with %NL80211_CMD_ASSOCIATE and
- *	with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests
+ *	%NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for
+ *	%NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it
+ *	must have decided whether to use management frame protection or not.
+ *	Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will
+ *	let the driver (or the firmware) decide whether to use MFP or not.
  *
  * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
  *	&struct nl80211_sta_flag_update.
  *	in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it
  *	wants to use the supported offload of the 4-way handshake.
  * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
- * @NL80211_ATTR_PORT_AUTHORIZED: flag attribute used in %NL80211_CMD_ROAMED
+ * @NL80211_ATTR_PORT_AUTHORIZED: (reserved)
- *	notification indicating that that 802.1X authentication was done by
- *	the driver or is not needed (because roaming used the Fast Transition
- *	protocol).
  *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * enum nl80211_mfp - Management frame protection state
  * @NL80211_MFP_NO: Management frame protection not used
  * @NL80211_MFP_REQUIRED: Management frame protection required
+ * @NL80211_MFP_OPTIONAL: Management frame protection is optional
  */
 enum nl80211_mfp {
 	NL80211_MFP_NO,
 	NL80211_MFP_REQUIRED,
+	NL80211_MFP_OPTIONAL,
 };
 enum nl80211_wpa_versions {
  *	handshake with 802.1X in station mode (will pass EAP frames to the host
  *	and accept the set_pmk/del_pmk commands), doing it in the host might not
  *	be supported.
+ * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding
+ *	the max channel attribute in the FILS request params IE with the
+ *	actual dwell time.
+ * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe
+ *	response
+ * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending
+ *	the first probe request in each channel at rate of at least 5.5Mbps.
+ * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports
+ *	probe request tx deferral and suppression
+ * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL
+ *	value in %NL80211_ATTR_USE_MFP.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
 	NL80211_EXT_FEATURE_FILS_SK_OFFLOAD,
 	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK,
 	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X,
+	NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME,
+	NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP,
+	NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE,
+	NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION,
+	NL80211_EXT_FEATURE_MFP_OPTIONAL,
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
  *	locally administered 1, multicast 0) is assumed.
  *	This flag must not be requested when the feature isn't supported, check
  *	the nl80211 feature flags for the device.
+ * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS
+ *	request parameters IE in the probe request
+ * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
+ *	rate of at least 5.5M. In case non OCE AP is dicovered in the channel,
+ *	only the first probe req in the channel will be sent in high rate.
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
+ *	tx deferral (dot11FILSProbeDelay shall be set to 15ms)
+ *	and suppression (if it has received a broadcast Probe Response frame,
+ *	Beacon frame or FILS Discovery frame from an AP that the STA considers
+ *	a suitable candidate for (re-)association - suitable in terms of
+ *	SSID and/or RSSI
  */
 enum nl80211_scan_flags {
-	NL80211_SCAN_FLAG_LOW_PRIORITY			= 1<<0,
+	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
-	NL80211_SCAN_FLAG_FLUSH				= 1<<1,
+	NL80211_SCAN_FLAG_FLUSH					= 1<<1,
-	NL80211_SCAN_FLAG_AP				= 1<<2,
+	NL80211_SCAN_FLAG_AP					= 1<<2,
-	NL80211_SCAN_FLAG_RANDOM_ADDR			= 1<<3,
+	NL80211_SCAN_FLAG_RANDOM_ADDR				= 1<<3,
+	NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME			= 1<<4,
+	NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP		= 1<<5,
+	NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE		= 1<<6,
+	NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION	= 1<<7,
 };
 /**