mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values

This change is required for compilation of embedded controller firmware to work properly (See CONFIG_HOSTCMD_SECTION_SORTED).

Gwendal Grignou committed 7 years ago

Commit ff834331 parent 6f72c3f1 file · +136 −99Browse files

Unified · Split

include/linux/mfd/cros_ec_commands.h+136−99

@@ -553,6 +553,9 @@ struct ec_host_response { · 552 unmodified lines
553	* Parameter/response length is implicit in the structs. Some underlying	553	* Parameter/response length is implicit in the structs. Some underlying
554	* communication protocols (I2C, SPI) may add length or checksum headers, but	554	* communication protocols (I2C, SPI) may add length or checksum headers, but
555	* those are implementation-dependent and not defined here.	555	* those are implementation-dependent and not defined here.
		556	*
		557	* All commands MUST be #defined to be 4-digit UPPER CASE hex values
		558	* (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work.
556	*/	559	*/
557		560
558	/*****************************************************************************/	561	/*****************************************************************************/
@@ -562,7 +565,7 @@ struct ec_host_response { · 3 unmodified lines
562	* Get protocol version, used to deal with non-backward compatible protocol	565	* Get protocol version, used to deal with non-backward compatible protocol
563	* changes.	566	* changes.
564	*/	567	*/
565	#define EC_CMD_PROTO_VERSION 0x00	568	#define EC_CMD_PROTO_VERSION 0x0000
566		569
567	/**	570	/**
568	* struct ec_response_proto_version - Response to the proto version command.	571	* struct ec_response_proto_version - Response to the proto version command.
@@ -576,7 +579,7 @@ struct ec_response_proto_version { · 7 unmodified lines
576	* Hello. This is a simple command to test the EC is responsive to	579	* Hello. This is a simple command to test the EC is responsive to
577	* commands.	580	* commands.
578	*/	581	*/
579	#define EC_CMD_HELLO 0x01	582	#define EC_CMD_HELLO 0x0001
580		583
581	/**	584	/**
582	* struct ec_params_hello - Parameters to the hello command.	585	* struct ec_params_hello - Parameters to the hello command.
@@ -595,7 +598,7 @@ struct ec_response_hello { · 12 unmodified lines
595	} __ec_align4;	598	} __ec_align4;
596		599
597	/* Get version number */	600	/* Get version number */
598	#define EC_CMD_GET_VERSION 0x02	601	#define EC_CMD_GET_VERSION 0x0002
599		602
600	enum ec_current_image {	603	enum ec_current_image {
601	EC_IMAGE_UNKNOWN = 0,	604	EC_IMAGE_UNKNOWN = 0,
@@ -618,7 +621,7 @@ struct ec_response_get_version { · 16 unmodified lines
618	} __ec_align4;	621	} __ec_align4;
619		622
620	/* Read test */	623	/* Read test */
621	#define EC_CMD_READ_TEST 0x03	624	#define EC_CMD_READ_TEST 0x0003
622		625
623	/**	626	/**
624	* struct ec_params_read_test - Parameters for the read test command.	627	* struct ec_params_read_test - Parameters for the read test command.
@@ -643,10 +646,10 @@ struct ec_response_read_test { · 18 unmodified lines
643	*	646	*
644	* Response is null-terminated string.	647	* Response is null-terminated string.
645	*/	648	*/
646	#define EC_CMD_GET_BUILD_INFO 0x04	649	#define EC_CMD_GET_BUILD_INFO 0x0004
647		650
648	/* Get chip info */	651	/* Get chip info */
649	#define EC_CMD_GET_CHIP_INFO 0x05	652	#define EC_CMD_GET_CHIP_INFO 0x0005
650		653
651	/**	654	/**
652	* struct ec_response_get_chip_info - Response to the get chip info command.	655	* struct ec_response_get_chip_info - Response to the get chip info command.
@@ -661,7 +664,7 @@ struct ec_response_get_chip_info { · 8 unmodified lines
661	} __ec_align4;	664	} __ec_align4;
662		665
663	/* Get board HW version */	666	/* Get board HW version */
664	#define EC_CMD_GET_BOARD_VERSION 0x06	667	#define EC_CMD_GET_BOARD_VERSION 0x0006
665		668
666	/**	669	/**
667	* struct ec_response_board_version - Response to the board version command.	670	* struct ec_response_board_version - Response to the board version command.
@@ -679,7 +682,7 @@ struct ec_response_board_version { · 11 unmodified lines
679	*	682	*
680	* Response is params.size bytes of data.	683	* Response is params.size bytes of data.
681	*/	684	*/
682	#define EC_CMD_READ_MEMMAP 0x07	685	#define EC_CMD_READ_MEMMAP 0x0007
683		686
684	/**	687	/**
685	* struct ec_params_read_memmap - Parameters for the read memory map command.	688	* struct ec_params_read_memmap - Parameters for the read memory map command.
@@ -692,7 +695,7 @@ struct ec_params_read_memmap { · 6 unmodified lines
692	} __ec_align1;	695	} __ec_align1;
693		696
694	/* Read versions supported for a command */	697	/* Read versions supported for a command */
695	#define EC_CMD_GET_CMD_VERSIONS 0x08	698	#define EC_CMD_GET_CMD_VERSIONS 0x0008
696		699
697	/**	700	/**
698	* struct ec_params_get_cmd_versions - Parameters for the get command versions.	701	* struct ec_params_get_cmd_versions - Parameters for the get command versions.
@@ -727,7 +730,7 @@ struct ec_response_get_cmd_versions { · 28 unmodified lines
727	* lpc must read the status from the command register. Attempting this on	730	* lpc must read the status from the command register. Attempting this on
728	* lpc will overwrite the args/parameter space and corrupt its data.	731	* lpc will overwrite the args/parameter space and corrupt its data.
729	*/	732	*/
730	#define EC_CMD_GET_COMMS_STATUS 0x09	733	#define EC_CMD_GET_COMMS_STATUS 0x0009
731		734
732	/* Avoid using ec_status which is for return values */	735	/* Avoid using ec_status which is for return values */
733	enum ec_comms_status {	736	enum ec_comms_status {
@@ -744,7 +747,7 @@ struct ec_response_get_comms_status { · 10 unmodified lines
744	} __ec_align4;	747	} __ec_align4;
745		748
746	/* Fake a variety of responses, purely for testing purposes. */	749	/* Fake a variety of responses, purely for testing purposes. */
747	#define EC_CMD_TEST_PROTOCOL 0x0a	750	#define EC_CMD_TEST_PROTOCOL 0x000A
748		751
749	/* Tell the EC what to send back to us. */	752	/* Tell the EC what to send back to us. */
750	struct ec_params_test_protocol {	753	struct ec_params_test_protocol {
@@ -759,7 +762,7 @@ struct ec_response_test_protocol { · 8 unmodified lines
759	} __ec_align4;	762	} __ec_align4;
760		763
761	/* Get protocol information */	764	/* Get protocol information */
762	#define EC_CMD_GET_PROTOCOL_INFO 0x0b	765	#define EC_CMD_GET_PROTOCOL_INFO 0x000B
763		766
764	/* Flags for ec_response_get_protocol_info.flags */	767	/* Flags for ec_response_get_protocol_info.flags */
765	/* EC_RES_IN_PROGRESS may be returned if a command is slow */	768	/* EC_RES_IN_PROGRESS may be returned if a command is slow */
@@ -805,11 +808,11 @@ struct ec_response_get_set_value { · 39 unmodified lines
805	} __ec_align4;	808	} __ec_align4;
806		809
807	/* More than one command can use these structs to get/set parameters. */	810	/* More than one command can use these structs to get/set parameters. */
808	#define EC_CMD_GSV_PAUSE_IN_S5 0x0c	811	#define EC_CMD_GSV_PAUSE_IN_S5 0x000C
809		812
810	/*****************************************************************************/	813	/*****************************************************************************/
811	/* List the features supported by the firmware */	814	/* List the features supported by the firmware */
812	#define EC_CMD_GET_FEATURES 0x0d	815	#define EC_CMD_GET_FEATURES 0x000D
813		816
814	/* Supported features */	817	/* Supported features */
815	enum ec_feature_code {	818	enum ec_feature_code {
@@ -933,7 +936,7 @@ struct ec_response_get_features { · 117 unmodified lines
933	/* Flash commands */	936	/* Flash commands */
934		937
935	/* Get flash info */	938	/* Get flash info */
936	#define EC_CMD_FLASH_INFO 0x10	939	#define EC_CMD_FLASH_INFO 0x0010
937		940
938	/**	941	/**
939	* struct ec_response_flash_info - Response to the flash info command.	942	* struct ec_response_flash_info - Response to the flash info command.
@@ -1000,7 +1003,7 @@ struct ec_response_flash_info_1 { · 60 unmodified lines
1000	*	1003	*
1001	* Response is params.size bytes of data.	1004	* Response is params.size bytes of data.
1002	*/	1005	*/
1003	#define EC_CMD_FLASH_READ 0x11	1006	#define EC_CMD_FLASH_READ 0x0011
1004		1007
1005	/**	1008	/**
1006	* struct ec_params_flash_read - Parameters for the flash read command.	1009	* struct ec_params_flash_read - Parameters for the flash read command.
@@ -1013,7 +1016,7 @@ struct ec_params_flash_read { · 6 unmodified lines
1013	} __ec_align4;	1016	} __ec_align4;
1014		1017
1015	/* Write flash */	1018	/* Write flash */
1016	#define EC_CMD_FLASH_WRITE 0x12	1019	#define EC_CMD_FLASH_WRITE 0x0012
1017	#define EC_VER_FLASH_WRITE 1	1020	#define EC_VER_FLASH_WRITE 1
1018		1021
1019	/* Version 0 of the flash command supported only 64 bytes of data */	1022	/* Version 0 of the flash command supported only 64 bytes of data */
@@ -1031,7 +1034,7 @@ struct ec_params_flash_write { · 11 unmodified lines
1031	} __ec_align4;	1034	} __ec_align4;
1032		1035
1033	/* Erase flash */	1036	/* Erase flash */
1034	#define EC_CMD_FLASH_ERASE 0x13	1037	#define EC_CMD_FLASH_ERASE 0x0013
1035		1038
1036	/**	1039	/**
1037	* struct ec_params_flash_erase - Parameters for the flash erase command.	1040	* struct ec_params_flash_erase - Parameters for the flash erase command.
@@ -1053,7 +1056,7 @@ struct ec_params_flash_erase { · 15 unmodified lines
1053	*	1056	*
1054	* If mask=0, simply returns the current flags state.	1057	* If mask=0, simply returns the current flags state.
1055	*/	1058	*/
1056	#define EC_CMD_FLASH_PROTECT 0x15	1059	#define EC_CMD_FLASH_PROTECT 0x0015
1057	#define EC_VER_FLASH_PROTECT 1 /* Command version 1 */	1060	#define EC_VER_FLASH_PROTECT 1 /* Command version 1 */
1058		1061
1059	/* Flags for flash protection */	1062	/* Flags for flash protection */
@@ -1110,7 +1113,7 @@ struct ec_response_flash_protect { · 50 unmodified lines
1110	*/	1113	*/
1111		1114
1112	/* Get the region offset/size */	1115	/* Get the region offset/size */
1113	#define EC_CMD_FLASH_REGION_INFO 0x16	1116	#define EC_CMD_FLASH_REGION_INFO 0x0016
1114	#define EC_VER_FLASH_REGION_INFO 1	1117	#define EC_VER_FLASH_REGION_INFO 1
1115		1118
1116	enum ec_flash_region {	1119	enum ec_flash_region {
@@ -1142,7 +1145,7 @@ struct ec_response_flash_region_info { · 25 unmodified lines
1142	} __ec_align4;	1145	} __ec_align4;
1143		1146
1144	/* Read/write VbNvContext */	1147	/* Read/write VbNvContext */
1145	#define EC_CMD_VBNV_CONTEXT 0x17	1148	#define EC_CMD_VBNV_CONTEXT 0x0017
1146	#define EC_VER_VBNV_CONTEXT 1	1149	#define EC_VER_VBNV_CONTEXT 1
1147	#define EC_VBNV_BLOCK_SIZE 16	1150	#define EC_VBNV_BLOCK_SIZE 16
1148		1151
@@ -1164,7 +1167,7 @@ struct ec_response_vbnvcontext { · 15 unmodified lines
1164	/* PWM commands */	1167	/* PWM commands */
1165		1168
1166	/* Get fan target RPM */	1169	/* Get fan target RPM */
1167	#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x20	1170	#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x0020
1168		1171
1169	struct ec_response_pwm_get_fan_rpm {	1172	struct ec_response_pwm_get_fan_rpm {
1170	uint32_t rpm;	1173	uint32_t rpm;
@@ -1178,7 +1181,7 @@ struct ec_params_pwm_set_fan_target_rpm { · 7 unmodified lines
1178	} __ec_align_size1;	1181	} __ec_align_size1;
1179		1182
1180	/* Get keyboard backlight */	1183	/* Get keyboard backlight */
1181	#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22	1184	#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x0022
1182		1185
1183	struct ec_response_pwm_get_keyboard_backlight {	1186	struct ec_response_pwm_get_keyboard_backlight {
1184	uint8_t percent;	1187	uint8_t percent;
@@ -1186,20 +1189,20 @@ struct ec_response_pwm_get_keyboard_backlight { · 1 unmodified line
1186	} __ec_align1;	1189	} __ec_align1;
1187		1190
1188	/* Set keyboard backlight */	1191	/* Set keyboard backlight */
1189	#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23	1192	#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x0023
1190		1193
1191	struct ec_params_pwm_set_keyboard_backlight {	1194	struct ec_params_pwm_set_keyboard_backlight {
1192	uint8_t percent;	1195	uint8_t percent;
1193	} __ec_align1;	1196	} __ec_align1;
1194		1197
1195	/* Set target fan PWM duty cycle */	1198	/* Set target fan PWM duty cycle */
1196	#define EC_CMD_PWM_SET_FAN_DUTY 0x24	1199	#define EC_CMD_PWM_SET_FAN_DUTY 0x0024
1197		1200
1198	struct ec_params_pwm_set_fan_duty {	1201	struct ec_params_pwm_set_fan_duty {
1199	uint32_t percent;	1202	uint32_t percent;
1200	} __ec_align4;	1203	} __ec_align4;
1201		1204
1202	#define EC_CMD_PWM_SET_DUTY 0x25	1205	#define EC_CMD_PWM_SET_DUTY 0x0025
1203	/* 16 bit duty cycle, 0xffff = 100% */	1206	/* 16 bit duty cycle, 0xffff = 100% */
1204	#define EC_PWM_MAX_DUTY 0xffff	1207	#define EC_PWM_MAX_DUTY 0xffff
1205		1208
@@ -1219,7 +1222,7 @@ struct ec_params_pwm_set_duty { · 13 unmodified lines
1219	uint8_t index; /* Type-specific index, or 0 if unique */	1222	uint8_t index; /* Type-specific index, or 0 if unique */
1220	} __ec_align4;	1223	} __ec_align4;
1221		1224
1222	#define EC_CMD_PWM_GET_DUTY 0x26	1225	#define EC_CMD_PWM_GET_DUTY 0x0026
1223		1226
1224	struct ec_params_pwm_get_duty {	1227	struct ec_params_pwm_get_duty {
1225	uint8_t pwm_type; /* ec_pwm_type */	1228	uint8_t pwm_type; /* ec_pwm_type */
@@ -1237,7 +1240,7 @@ struct ec_response_pwm_get_duty { · 11 unmodified lines
1237	* into a subcommand. We'll make separate structs for subcommands with	1240	* into a subcommand. We'll make separate structs for subcommands with
1238	* different input args, so that we know how much to expect.	1241	* different input args, so that we know how much to expect.
1239	*/	1242	*/
1240	#define EC_CMD_LIGHTBAR_CMD 0x28	1243	#define EC_CMD_LIGHTBAR_CMD 0x0028
1241		1244
1242	struct rgb_s {	1245	struct rgb_s {
1243	uint8_t r, g, b;	1246	uint8_t r, g, b;
@@ -1431,7 +1434,7 @@ enum lightbar_command { · 187 unmodified lines
1431	/*****************************************************************************/	1434	/*****************************************************************************/
1432	/* LED control commands */	1435	/* LED control commands */
1433		1436
1434	#define EC_CMD_LED_CONTROL 0x29	1437	#define EC_CMD_LED_CONTROL 0x0029
1435		1438
1436	enum ec_led_id {	1439	enum ec_led_id {
1437	/* LED to indicate battery state of charge */	1440	/* LED to indicate battery state of charge */
@@ -1488,7 +1491,7 @@ struct ec_response_led_control { · 50 unmodified lines
1488	*/	1491	*/
1489		1492
1490	/* Verified boot hash command */	1493	/* Verified boot hash command */
1491	#define EC_CMD_VBOOT_HASH 0x2A	1494	#define EC_CMD_VBOOT_HASH 0x002A
1492		1495
1493	struct ec_params_vboot_hash {	1496	struct ec_params_vboot_hash {
1494	uint8_t cmd; /* enum ec_vboot_hash_cmd */	1497	uint8_t cmd; /* enum ec_vboot_hash_cmd */
@@ -1540,7 +1543,7 @@ enum ec_vboot_hash_status { · 45 unmodified lines
1540	* Motion sense commands. We'll make separate structs for sub-commands with	1543	* Motion sense commands. We'll make separate structs for sub-commands with
1541	* different input args, so that we know how much to expect.	1544	* different input args, so that we know how much to expect.
1542	*/	1545	*/
1543	#define EC_CMD_MOTION_SENSE_CMD 0x2B	1546	#define EC_CMD_MOTION_SENSE_CMD 0x002B
1544		1547
1545	/* Motion sense commands */	1548	/* Motion sense commands */
1546	enum motionsense_command {	1549	enum motionsense_command {
@@ -1804,7 +1807,7 @@ struct ec_response_motion_sense { · 257 unmodified lines
1804	/* USB charging control commands */	1807	/* USB charging control commands */
1805		1808
1806	/* Set USB port charging mode */	1809	/* Set USB port charging mode */
1807	#define EC_CMD_USB_CHARGE_SET_MODE 0x30	1810	#define EC_CMD_USB_CHARGE_SET_MODE 0x0030
1808		1811
1809	struct ec_params_usb_charge_set_mode {	1812	struct ec_params_usb_charge_set_mode {
1810	uint8_t usb_port_id;	1813	uint8_t usb_port_id;
@@ -1818,7 +1821,7 @@ struct ec_params_usb_charge_set_mode { · 7 unmodified lines
1818	#define EC_PSTORE_SIZE_MAX 64	1821	#define EC_PSTORE_SIZE_MAX 64
1819		1822
1820	/* Get persistent storage info */	1823	/* Get persistent storage info */
1821	#define EC_CMD_PSTORE_INFO 0x40	1824	#define EC_CMD_PSTORE_INFO 0x0040
1822		1825
1823	struct ec_response_pstore_info {	1826	struct ec_response_pstore_info {
1824	/* Persistent storage size, in bytes */	1827	/* Persistent storage size, in bytes */
@@ -1832,7 +1835,7 @@ struct ec_response_pstore_info { · 7 unmodified lines
1832	*	1835	*
1833	* Response is params.size bytes of data.	1836	* Response is params.size bytes of data.
1834	*/	1837	*/
1835	#define EC_CMD_PSTORE_READ 0x41	1838	#define EC_CMD_PSTORE_READ 0x0041
1836		1839
1837	struct ec_params_pstore_read {	1840	struct ec_params_pstore_read {
1838	uint32_t offset; /* Byte offset to read */	1841	uint32_t offset; /* Byte offset to read */
@@ -1840,7 +1843,7 @@ struct ec_params_pstore_read { · 1 unmodified line
1840	} __ec_align4;	1843	} __ec_align4;
1841		1844
1842	/* Write persistent storage */	1845	/* Write persistent storage */
1843	#define EC_CMD_PSTORE_WRITE 0x42	1846	#define EC_CMD_PSTORE_WRITE 0x0042
1844		1847
1845	struct ec_params_pstore_write {	1848	struct ec_params_pstore_write {
1846	uint32_t offset; /* Byte offset to write */	1849	uint32_t offset; /* Byte offset to write */
@@ -1861,12 +1864,12 @@ struct ec_response_rtc { · 14 unmodified lines
1861	} __ec_align4;	1864	} __ec_align4;
1862		1865
1863	/* These use ec_response_rtc */	1866	/* These use ec_response_rtc */
1864	#define EC_CMD_RTC_GET_VALUE 0x44	1867	#define EC_CMD_RTC_GET_VALUE 0x0044
1865	#define EC_CMD_RTC_GET_ALARM 0x45	1868	#define EC_CMD_RTC_GET_ALARM 0x0045
1866		1869
1867	/* These all use ec_params_rtc */	1870	/* These all use ec_params_rtc */
1868	#define EC_CMD_RTC_SET_VALUE 0x46	1871	#define EC_CMD_RTC_SET_VALUE 0x0046
1869	#define EC_CMD_RTC_SET_ALARM 0x47	1872	#define EC_CMD_RTC_SET_ALARM 0x0047
1870		1873
1871	/* Pass as time param to SET_ALARM to clear the current alarm */	1874	/* Pass as time param to SET_ALARM to clear the current alarm */
1872	#define EC_RTC_ALARM_CLEAR 0	1875	#define EC_RTC_ALARM_CLEAR 0
@@ -1878,8 +1881,8 @@ struct ec_response_rtc { · 5 unmodified lines
1878	#define EC_PORT80_SIZE_MAX 32	1881	#define EC_PORT80_SIZE_MAX 32
1879		1882
1880	/* Get last port80 code from previous boot */	1883	/* Get last port80 code from previous boot */
1881	#define EC_CMD_PORT80_LAST_BOOT 0x48	1884	#define EC_CMD_PORT80_LAST_BOOT 0x0048
1882	#define EC_CMD_PORT80_READ 0x48	1885	#define EC_CMD_PORT80_READ 0x0048
1883		1886
1884	enum ec_port80_subcmd {	1887	enum ec_port80_subcmd {
1885	EC_PORT80_GET_INFO = 0,	1888	EC_PORT80_GET_INFO = 0,
@@ -1920,8 +1923,8 @@ struct ec_response_port80_last_boot { · 34 unmodified lines
1920	* Version 1 separates the CPU thermal limits from the fan control.	1923	* Version 1 separates the CPU thermal limits from the fan control.
1921	*/	1924	*/
1922		1925
1923	#define EC_CMD_THERMAL_SET_THRESHOLD 0x50	1926	#define EC_CMD_THERMAL_SET_THRESHOLD 0x0050
1924	#define EC_CMD_THERMAL_GET_THRESHOLD 0x51	1927	#define EC_CMD_THERMAL_GET_THRESHOLD 0x0051
1925		1928
1926	/* The version 0 structs are opaque. You have to know what they are for	1929	/* The version 0 structs are opaque. You have to know what they are for
1927	* the get/set commands to make any sense.	1930	* the get/set commands to make any sense.
@@ -1983,10 +1986,10 @@ struct ec_params_thermal_set_threshold_v1 { · 55 unmodified lines
1983	/****************************************************************************/	1986	/****************************************************************************/
1984		1987
1985	/* Toggle automatic fan control */	1988	/* Toggle automatic fan control */
1986	#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52	1989	#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x0052
1987		1990
1988	/* Get TMP006 calibration data */	1991	/* Get TMP006 calibration data */
1989	#define EC_CMD_TMP006_GET_CALIBRATION 0x53	1992	#define EC_CMD_TMP006_GET_CALIBRATION 0x0053
1990		1993
1991	struct ec_params_tmp006_get_calibration {	1994	struct ec_params_tmp006_get_calibration {
1992	uint8_t index;	1995	uint8_t index;
@@ -2000,7 +2003,7 @@ struct ec_response_tmp006_get_calibration { · 7 unmodified lines
2000	} __ec_align4;	2003	} __ec_align4;
2001		2004
2002	/* Set TMP006 calibration data */	2005	/* Set TMP006 calibration data */
2003	#define EC_CMD_TMP006_SET_CALIBRATION 0x54	2006	#define EC_CMD_TMP006_SET_CALIBRATION 0x0054
2004		2007
2005	struct ec_params_tmp006_set_calibration {	2008	struct ec_params_tmp006_set_calibration {
2006	uint8_t index;	2009	uint8_t index;
@@ -2012,7 +2015,7 @@ struct ec_params_tmp006_set_calibration { · 5 unmodified lines
2012	} __ec_align4;	2015	} __ec_align4;
2013		2016
2014	/* Read raw TMP006 data */	2017	/* Read raw TMP006 data */
2015	#define EC_CMD_TMP006_GET_RAW 0x55	2018	#define EC_CMD_TMP006_GET_RAW 0x0055
2016		2019
2017	struct ec_params_tmp006_get_raw {	2020	struct ec_params_tmp006_get_raw {
2018	uint8_t index;	2021	uint8_t index;
@@ -2036,12 +2039,12 @@ struct ec_response_tmp006_get_raw { · 17 unmodified lines
2036	* to obtain the instantaneous state, use EC_CMD_MKBP_INFO with the type	2039	* to obtain the instantaneous state, use EC_CMD_MKBP_INFO with the type
2037	* EC_MKBP_INFO_CURRENT and event EC_MKBP_EVENT_KEY_MATRIX.	2040	* EC_MKBP_INFO_CURRENT and event EC_MKBP_EVENT_KEY_MATRIX.
2038	*/	2041	*/
2039	#define EC_CMD_MKBP_STATE 0x60	2042	#define EC_CMD_MKBP_STATE 0x0060
2040		2043
2041	/*	2044	/*
2042	* Provide information about various MKBP things. See enum ec_mkbp_info_type.	2045	* Provide information about various MKBP things. See enum ec_mkbp_info_type.
2043	*/	2046	*/
2044	#define EC_CMD_MKBP_INFO 0x61	2047	#define EC_CMD_MKBP_INFO 0x0061
2045		2048
2046	struct ec_response_mkbp_info {	2049	struct ec_response_mkbp_info {
2047	uint32_t rows;	2050	uint32_t rows;
@@ -2095,7 +2098,7 @@ enum ec_mkbp_info_type { · 47 unmodified lines
2095	};	2098	};
2096		2099
2097	/* Simulate key press */	2100	/* Simulate key press */
2098	#define EC_CMD_MKBP_SIMULATE_KEY 0x62	2101	#define EC_CMD_MKBP_SIMULATE_KEY 0x0062
2099		2102
2100	struct ec_params_mkbp_simulate_key {	2103	struct ec_params_mkbp_simulate_key {
2101	uint8_t col;	2104	uint8_t col;
@@ -2104,8 +2107,8 @@ struct ec_params_mkbp_simulate_key { · 2 unmodified lines
2104	} __ec_align1;	2107	} __ec_align1;
2105		2108
2106	/* Configure keyboard scanning */	2109	/* Configure keyboard scanning */
2107	#define EC_CMD_MKBP_SET_CONFIG 0x64	2110	#define EC_CMD_MKBP_SET_CONFIG 0x0064
2108	#define EC_CMD_MKBP_GET_CONFIG 0x65	2111	#define EC_CMD_MKBP_GET_CONFIG 0x0065
2109		2112
2110	/* flags */	2113	/* flags */
2111	enum mkbp_config_flags {	2114	enum mkbp_config_flags {
@@ -2158,7 +2161,7 @@ struct ec_response_mkbp_get_config { · 46 unmodified lines
2158	} __ec_align_size1;	2161	} __ec_align_size1;
2159		2162
2160	/* Run the key scan emulation */	2163	/* Run the key scan emulation */
2161	#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66	2164	#define EC_CMD_KEYSCAN_SEQ_CTRL 0x0066
2162		2165
2163	enum ec_keyscan_seq_cmd {	2166	enum ec_keyscan_seq_cmd {
2164	EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */	2167	EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */
@@ -2219,7 +2222,7 @@ struct ec_result_keyscan_seq_ctrl { · 54 unmodified lines
2219	*	2222	*
2220	* The device replies with UNAVAILABLE if there aren't any pending events.	2223	* The device replies with UNAVAILABLE if there aren't any pending events.
2221	*/	2224	*/
2222	#define EC_CMD_GET_NEXT_EVENT 0x67	2225	#define EC_CMD_GET_NEXT_EVENT 0x0067
2223		2226
2224	enum ec_mkbp_event {	2227	enum ec_mkbp_event {
2225	/* Keyboard matrix changed. The event data is the new matrix state. */	2228	/* Keyboard matrix changed. The event data is the new matrix state. */
@@ -2298,7 +2301,7 @@ struct ec_response_get_next_event_v1 { · 72 unmodified lines
2298	/* Temperature sensor commands */	2301	/* Temperature sensor commands */
2299		2302
2300	/* Read temperature sensor info */	2303	/* Read temperature sensor info */
2301	#define EC_CMD_TEMP_SENSOR_GET_INFO 0x70	2304	#define EC_CMD_TEMP_SENSOR_GET_INFO 0x0070
2302		2305
2303	struct ec_params_temp_sensor_get_info {	2306	struct ec_params_temp_sensor_get_info {
2304	uint8_t id;	2307	uint8_t id;
@@ -2333,30 +2336,30 @@ struct ec_response_host_event_mask { · 28 unmodified lines
2333	} __ec_align4;	2336	} __ec_align4;
2334		2337
2335	/* These all use ec_response_host_event_mask */	2338	/* These all use ec_response_host_event_mask */
2336	#define EC_CMD_HOST_EVENT_GET_B 0x87	2339	#define EC_CMD_HOST_EVENT_GET_B 0x0087
2337	#define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x88	2340	#define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x0088
2338	#define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x89	2341	#define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x0089
2339	#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x8d	2342	#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x008D
2340		2343
2341	/* These all use ec_params_host_event_mask */	2344	/* These all use ec_params_host_event_mask */
2342	#define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x8a	2345	#define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x008A
2343	#define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x8b	2346	#define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x008B
2344	#define EC_CMD_HOST_EVENT_CLEAR 0x8c	2347	#define EC_CMD_HOST_EVENT_CLEAR 0x008C
2345	#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x8e	2348	#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x008E
2346	#define EC_CMD_HOST_EVENT_CLEAR_B 0x8f	2349	#define EC_CMD_HOST_EVENT_CLEAR_B 0x008F
2347		2350
2348	/*****************************************************************************/	2351	/*****************************************************************************/
2349	/* Switch commands */	2352	/* Switch commands */
2350		2353
2351	/* Enable/disable LCD backlight */	2354	/* Enable/disable LCD backlight */
2352	#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x90	2355	#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x0090
2353		2356
2354	struct ec_params_switch_enable_backlight {	2357	struct ec_params_switch_enable_backlight {
2355	uint8_t enabled;	2358	uint8_t enabled;
2356	} __ec_align1;	2359	} __ec_align1;
2357		2360
2358	/* Enable/disable WLAN/Bluetooth */	2361	/* Enable/disable WLAN/Bluetooth */
2359	#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91	2362	#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x0091
2360	#define EC_VER_SWITCH_ENABLE_WIRELESS 1	2363	#define EC_VER_SWITCH_ENABLE_WIRELESS 1
2361		2364
2362	/* Version 0 params; no response */	2365	/* Version 0 params; no response */
@@ -2396,7 +2399,7 @@ struct ec_response_switch_enable_wireless_v1 { · 33 unmodified lines
2396	/* GPIO commands. Only available on EC if write protect has been disabled. */	2399	/* GPIO commands. Only available on EC if write protect has been disabled. */
2397		2400
2398	/* Set GPIO output value */	2401	/* Set GPIO output value */
2399	#define EC_CMD_GPIO_SET 0x92	2402	#define EC_CMD_GPIO_SET 0x0092
2400		2403
2401	struct ec_params_gpio_set {	2404	struct ec_params_gpio_set {
2402	char name[32];	2405	char name[32];
@@ -2404,7 +2407,7 @@ struct ec_params_gpio_set { · 1 unmodified line
2404	} __ec_align1;	2407	} __ec_align1;
2405		2408
2406	/* Get GPIO value */	2409	/* Get GPIO value */
2407	#define EC_CMD_GPIO_GET 0x93	2410	#define EC_CMD_GPIO_GET 0x0093
2408		2411
2409	/* Version 0 of input params and response */	2412	/* Version 0 of input params and response */
2410	struct ec_params_gpio_get {	2413	struct ec_params_gpio_get {
@@ -2458,7 +2461,7 @@ enum gpio_get_subcmd { · 47 unmodified lines
2458	*/	2461	*/
2459		2462
2460	/* Read I2C bus */	2463	/* Read I2C bus */
2461	#define EC_CMD_I2C_READ 0x94	2464	#define EC_CMD_I2C_READ 0x0094
2462		2465
2463	struct ec_params_i2c_read {	2466	struct ec_params_i2c_read {
2464	uint16_t addr; /* 8-bit address (7-bit shifted << 1) */	2467	uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
@@ -2472,7 +2475,7 @@ struct ec_response_i2c_read { · 7 unmodified lines
2472	} __ec_align2;	2475	} __ec_align2;
2473		2476
2474	/* Write I2C bus */	2477	/* Write I2C bus */
2475	#define EC_CMD_I2C_WRITE 0x95	2478	#define EC_CMD_I2C_WRITE 0x0095
2476		2479
2477	struct ec_params_i2c_write {	2480	struct ec_params_i2c_write {
2478	uint16_t data;	2481	uint16_t data;
@@ -2488,7 +2491,7 @@ struct ec_params_i2c_write { · 9 unmodified lines
2488	/* Force charge state machine to stop charging the battery or force it to	2491	/* Force charge state machine to stop charging the battery or force it to
2489	* discharge the battery.	2492	* discharge the battery.
2490	*/	2493	*/
2491	#define EC_CMD_CHARGE_CONTROL 0x96	2494	#define EC_CMD_CHARGE_CONTROL 0x0096
2492	#define EC_VER_CHARGE_CONTROL 1	2495	#define EC_VER_CHARGE_CONTROL 1
2493		2496
2494	enum ec_charge_control_mode {	2497	enum ec_charge_control_mode {
@@ -2504,7 +2507,7 @@ struct ec_params_charge_control { · 9 unmodified lines
2504	/*****************************************************************************/	2507	/*****************************************************************************/
2505		2508
2506	/* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */	2509	/* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */
2507	#define EC_CMD_CONSOLE_SNAPSHOT 0x97	2510	#define EC_CMD_CONSOLE_SNAPSHOT 0x0097
2508		2511
2509	/*	2512	/*
2510	* Read data from the saved snapshot. If the subcmd parameter is	2513	* Read data from the saved snapshot. If the subcmd parameter is
@@ -2518,7 +2521,7 @@ struct ec_params_charge_control { · 7 unmodified lines
2518	* Response is null-terminated string. Empty string, if there is no more	2521	* Response is null-terminated string. Empty string, if there is no more
2519	* remaining output.	2522	* remaining output.
2520	*/	2523	*/
2521	#define EC_CMD_CONSOLE_READ 0x98	2524	#define EC_CMD_CONSOLE_READ 0x0098
2522		2525
2523	enum ec_console_read_subcmd {	2526	enum ec_console_read_subcmd {
2524	CONSOLE_READ_NEXT = 0,	2527	CONSOLE_READ_NEXT = 0,
@@ -2538,8 +2541,7 @@ struct ec_params_console_read_v1 { · 13 unmodified lines
2538	* EC_RES_SUCCESS if the command was successful.	2541	* EC_RES_SUCCESS if the command was successful.
2539	* EC_RES_ERROR if the cut off command failed.	2542	* EC_RES_ERROR if the cut off command failed.
2540	*/	2543	*/
2541		2544	#define EC_CMD_BATTERY_CUT_OFF 0x0099
2542	#define EC_CMD_BATTERY_CUT_OFF 0x99
2543		2545
2544	#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN (1 << 0)	2546	#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN (1 << 0)
2545		2547
@@ -2553,7 +2555,7 @@ struct ec_params_battery_cutoff { · 7 unmodified lines
2553	/*	2555	/*
2554	* Switch USB mux or return to automatic switching.	2556	* Switch USB mux or return to automatic switching.
2555	*/	2557	*/
2556	#define EC_CMD_USB_MUX 0x9a	2558	#define EC_CMD_USB_MUX 0x009A
2557		2559
2558	struct ec_params_usb_mux {	2560	struct ec_params_usb_mux {
2559	uint8_t mux;	2561	uint8_t mux;
@@ -2570,7 +2572,7 @@ enum ec_ldo_state { · 10 unmodified lines
2570	/*	2572	/*
2571	* Switch on/off a LDO.	2573	* Switch on/off a LDO.
2572	*/	2574	*/
2573	#define EC_CMD_LDO_SET 0x9b	2575	#define EC_CMD_LDO_SET 0x009B
2574		2576
2575	struct ec_params_ldo_set {	2577	struct ec_params_ldo_set {
2576	uint8_t index;	2578	uint8_t index;
@@ -2580,7 +2582,7 @@ struct ec_params_ldo_set { · 3 unmodified lines
2580	/*	2582	/*
2581	* Get LDO state.	2583	* Get LDO state.
2582	*/	2584	*/
2583	#define EC_CMD_LDO_GET 0x9c	2585	#define EC_CMD_LDO_GET 0x009C
2584		2586
2585	struct ec_params_ldo_get {	2587	struct ec_params_ldo_get {
2586	uint8_t index;	2588	uint8_t index;
@@ -2596,7 +2598,7 @@ struct ec_response_ldo_get { · 9 unmodified lines
2596	/*	2598	/*
2597	* Get power info.	2599	* Get power info.
2598	*/	2600	*/
2599	#define EC_CMD_POWER_INFO 0x9d	2601	#define EC_CMD_POWER_INFO 0x009D
2600		2602
2601	struct ec_response_power_info {	2603	struct ec_response_power_info {
2602	uint32_t usb_dev_type;	2604	uint32_t usb_dev_type;
@@ -2609,7 +2611,7 @@ struct ec_response_power_info { · 6 unmodified lines
2609	/*****************************************************************************/	2611	/*****************************************************************************/
2610	/* I2C passthru command */	2612	/* I2C passthru command */
2611		2613
2612	#define EC_CMD_I2C_PASSTHRU 0x9e	2614	#define EC_CMD_I2C_PASSTHRU 0x009E
2613		2615
2614	/* Read data; if not present, message is a write */	2616	/* Read data; if not present, message is a write */
2615	#define EC_I2C_FLAG_READ (1 << 15)	2617	#define EC_I2C_FLAG_READ (1 << 15)
@@ -2644,7 +2646,7 @@ struct ec_response_i2c_passthru { · 28 unmodified lines
2644	/*****************************************************************************/	2646	/*****************************************************************************/
2645	/* Power button hang detect */	2647	/* Power button hang detect */
2646		2648
2647	#define EC_CMD_HANG_DETECT 0x9f	2649	#define EC_CMD_HANG_DETECT 0x009F
2648		2650
2649	/* Reasons to start hang detection timer */	2651	/* Reasons to start hang detection timer */
2650	/* Power button pressed */	2652	/* Power button pressed */
@@ -2703,7 +2705,7 @@ struct ec_params_hang_detect { · 52 unmodified lines
2703	* This is the single catch-all host command to exchange data regarding the	2705	* This is the single catch-all host command to exchange data regarding the
2704	* charge state machine (v2 and up).	2706	* charge state machine (v2 and up).
2705	*/	2707	*/
2706	#define EC_CMD_CHARGE_STATE 0xa0	2708	#define EC_CMD_CHARGE_STATE 0x00A0
2707		2709
2708	/* Subcommands for this host command */	2710	/* Subcommands for this host command */
2709	enum charge_state_command {	2711	enum charge_state_command {
@@ -2774,7 +2776,7 @@ struct ec_response_charge_state { · 64 unmodified lines
2774	/*	2776	/*
2775	* Set maximum battery charging current.	2777	* Set maximum battery charging current.
2776	*/	2778	*/
2777	#define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1	2779	#define EC_CMD_CHARGE_CURRENT_LIMIT 0x00A1
2778		2780
2779	struct ec_params_current_limit {	2781	struct ec_params_current_limit {
2780	uint32_t limit; /* in mA */	2782	uint32_t limit; /* in mA */
@@ -2794,7 +2796,7 @@ struct ec_params_external_power_limit_v1 { · 13 unmodified lines
2794	#define EC_POWER_LIMIT_NONE 0xffff	2796	#define EC_POWER_LIMIT_NONE 0xffff
2795		2797
2796	/* Inform the EC when entering a sleep state */	2798	/* Inform the EC when entering a sleep state */
2797	#define EC_CMD_HOST_SLEEP_EVENT 0xa9	2799	#define EC_CMD_HOST_SLEEP_EVENT 0x00A9
2798		2800
2799	enum host_sleep_event {	2801	enum host_sleep_event {
2800	HOST_SLEEP_EVENT_S3_SUSPEND = 1,	2802	HOST_SLEEP_EVENT_S3_SUSPEND = 1,
@@ -2868,14 +2870,14 @@ struct ec_response_host_sleep_event_v1 { · 67 unmodified lines
2868	/* Smart battery pass-through */	2870	/* Smart battery pass-through */
2869		2871
2870	/* Get / Set 16-bit smart battery registers */	2872	/* Get / Set 16-bit smart battery registers */
2871	#define EC_CMD_SB_READ_WORD 0xb0	2873	#define EC_CMD_SB_READ_WORD 0x00B0
2872	#define EC_CMD_SB_WRITE_WORD 0xb1	2874	#define EC_CMD_SB_WRITE_WORD 0x00B1
2873		2875
2874	/* Get / Set string smart battery parameters	2876	/* Get / Set string smart battery parameters
2875	* formatted as SMBUS "block".	2877	* formatted as SMBUS "block".
2876	*/	2878	*/
2877	#define EC_CMD_SB_READ_BLOCK 0xb2	2879	#define EC_CMD_SB_READ_BLOCK 0x00B2
2878	#define EC_CMD_SB_WRITE_BLOCK 0xb3	2880	#define EC_CMD_SB_WRITE_BLOCK 0x00B3
2879		2881
2880	struct ec_params_sb_rd {	2882	struct ec_params_sb_rd {
2881	uint8_t reg;	2883	uint8_t reg;
@@ -2908,7 +2910,7 @@ struct ec_params_sb_wr_block { · 26 unmodified lines
2908	* requested value.	2910	* requested value.
2909	*/	2911	*/
2910		2912
2911	#define EC_CMD_BATTERY_VENDOR_PARAM 0xb4	2913	#define EC_CMD_BATTERY_VENDOR_PARAM 0x00B4
2912		2914
2913	enum ec_battery_vendor_param_mode {	2915	enum ec_battery_vendor_param_mode {
2914	BATTERY_VENDOR_PARAM_MODE_GET = 0,	2916	BATTERY_VENDOR_PARAM_MODE_GET = 0,
@@ -3024,7 +3026,7 @@ struct ec_response_codec_gain { · 109 unmodified lines
3024	* TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't	3026	* TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't
3025	* necessarily reboot the EC. Rename to "image" or something similar?	3027	* necessarily reboot the EC. Rename to "image" or something similar?
3026	*/	3028	*/
3027	#define EC_CMD_REBOOT_EC 0xd2	3029	#define EC_CMD_REBOOT_EC 0x00D2
3028		3030
3029	/* Command */	3031	/* Command */
3030	enum ec_reboot_cmd {	3032	enum ec_reboot_cmd {
@@ -3052,7 +3054,7 @@ struct ec_params_reboot_ec { · 21 unmodified lines
3052	* Returns variable-length platform-dependent panic information. See panic.h	3054	* Returns variable-length platform-dependent panic information. See panic.h
3053	* for details.	3055	* for details.
3054	*/	3056	*/
3055	#define EC_CMD_GET_PANIC_INFO 0xd3	3057	#define EC_CMD_GET_PANIC_INFO 0x00D3
3056		3058
3057	/*****************************************************************************/	3059	/*****************************************************************************/
3058	/*	3060	/*
@@ -3260,7 +3262,7 @@ enum mkbp_cec_event { · 201 unmodified lines
3260	*	3262	*
3261	* Use EC_CMD_REBOOT_EC to reboot the EC more politely.	3263	* Use EC_CMD_REBOOT_EC to reboot the EC more politely.
3262	*/	3264	*/
3263	#define EC_CMD_REBOOT 0xd1 /* Think "die" */	3265	#define EC_CMD_REBOOT 0x00D1 /* Think "die" */
3264		3266
3265	/*	3267	/*
3266	* Resend last response (not supported on LPC).	3268	* Resend last response (not supported on LPC).
@@ -3269,7 +3271,7 @@ enum mkbp_cec_event { · 2 unmodified lines
3269	* there was no previous command, or the previous command's response was too	3271	* there was no previous command, or the previous command's response was too
3270	* big to save.	3272	* big to save.
3271	*/	3273	*/
3272	#define EC_CMD_RESEND_RESPONSE 0xdb	3274	#define EC_CMD_RESEND_RESPONSE 0x00DB
3273		3275
3274	/*	3276	/*
3275	* This header byte on a command indicate version 0. Any header byte less	3277	* This header byte on a command indicate version 0. Any header byte less
@@ -3281,7 +3283,7 @@ enum mkbp_cec_event { · 5 unmodified lines
3281	*	3283	*
3282	* The old EC interface must not use commands 0xdc or higher.	3284	* The old EC interface must not use commands 0xdc or higher.
3283	*/	3285	*/
3284	#define EC_CMD_VERSION0 0xdc	3286	#define EC_CMD_VERSION0 0x00DC
3285		3287
3286	#endif /* !__ACPI__ */	3288	#endif /* !__ACPI__ */
3287		3289
@@ -3293,7 +3295,7 @@ enum mkbp_cec_event { · 5 unmodified lines
3293	*/	3295	*/
3294		3296
3295	/* EC to PD MCU exchange status command */	3297	/* EC to PD MCU exchange status command */
3296	#define EC_CMD_PD_EXCHANGE_STATUS 0x100	3298	#define EC_CMD_PD_EXCHANGE_STATUS 0x0100
3297		3299
3298	/* Status of EC being sent to PD */	3300	/* Status of EC being sent to PD */
3299	struct ec_params_pd_status {	3301	struct ec_params_pd_status {
@@ -3307,7 +3309,7 @@ struct ec_response_pd_status { · 7 unmodified lines
3307	} __ec_align_size1;	3309	} __ec_align_size1;
3308		3310
3309	/* Set USB type-C port role and muxes */	3311	/* Set USB type-C port role and muxes */
3310	#define EC_CMD_USB_PD_CONTROL 0x101	3312	#define EC_CMD_USB_PD_CONTROL 0x0101
3311		3313
3312	enum usb_pd_control_role {	3314	enum usb_pd_control_role {
3313	USB_PD_CTRL_ROLE_NO_CHANGE = 0,	3315	USB_PD_CTRL_ROLE_NO_CHANGE = 0,
@@ -3360,7 +3362,7 @@ struct ec_response_usb_pd_control_v1 { · 46 unmodified lines
3360	char state[32];	3362	char state[32];
3361	} __ec_align1;	3363	} __ec_align1;
3362		3364
3363	#define EC_CMD_USB_PD_PORTS 0x102	3365	#define EC_CMD_USB_PD_PORTS 0x0102
3364		3366
3365	/* Maximum number of PD ports on a device, num_ports will be <= this */	3367	/* Maximum number of PD ports on a device, num_ports will be <= this */
3366	#define EC_USB_PD_MAX_PORTS 8	3368	#define EC_USB_PD_MAX_PORTS 8
@@ -3369,7 +3371,7 @@ struct ec_response_usb_pd_ports { · 2 unmodified lines
3369	uint8_t num_ports;	3371	uint8_t num_ports;
3370	} __ec_align1;	3372	} __ec_align1;
3371		3373
3372	#define EC_CMD_USB_PD_POWER_INFO 0x103	3374	#define EC_CMD_USB_PD_POWER_INFO 0x0103
3373		3375
3374	#define PD_POWER_CHARGING_PORT 0xff	3376	#define PD_POWER_CHARGING_PORT 0xff
3375	struct ec_params_usb_pd_power_info {	3377	struct ec_params_usb_pd_power_info {
@@ -3536,7 +3538,7 @@ struct mcdp_info { · 160 unmodified lines
3536	#define MCDP_FAMILY(family) ((family[0] << 8) \| family[1])	3538	#define MCDP_FAMILY(family) ((family[0] << 8) \| family[1])
3537		3539
3538	/* Get info about USB-C SS muxes */	3540	/* Get info about USB-C SS muxes */
3539	#define EC_CMD_USB_PD_MUX_INFO 0x11a	3541	#define EC_CMD_USB_PD_MUX_INFO 0x011A
3540		3542
3541	struct ec_params_usb_pd_mux_info {	3543	struct ec_params_usb_pd_mux_info {
3542	uint8_t port; /* USB-C port number */	3544	uint8_t port; /* USB-C port number */
@@ -3551,6 +3553,41 @@ struct ec_params_usb_pd_mux_info { · 8 unmodified lines
3551	struct ec_response_usb_pd_mux_info {	3553	struct ec_response_usb_pd_mux_info {
3552	uint8_t flags; /* USB_PD_MUX_-encoded USB mux state /	3554	uint8_t flags; /* USB_PD_MUX_-encoded USB mux state /
3553	} __ec_align1;	3555	} __ec_align1;
		3556	/*****************************************************************************/
		3557	/*
		3558	* Reserve a range of host commands for board-specific, experimental, or
		3559	* special purpose features. These can be (re)used without updating this file.
		3560	*
		3561	* CAUTION: Don't go nuts with this. Shipping products should document ALL
		3562	* their EC commands for easier development, testing, debugging, and support.
		3563	*
		3564	* All commands MUST be #defined to be 4-digit UPPER CASE hex values
		3565	* (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work.
		3566	*
		3567	* In your experimental code, you may want to do something like this:
		3568	*
		3569	* #define EC_CMD_MAGIC_FOO 0x0000
		3570	* #define EC_CMD_MAGIC_BAR 0x0001
		3571	* #define EC_CMD_MAGIC_HEY 0x0002
		3572	*
		3573	* DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_FOO, magic_foo_handler,
		3574	* EC_VER_MASK(0);
		3575	*
		3576	* DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_BAR, magic_bar_handler,
		3577	* EC_VER_MASK(0);
		3578	*
		3579	* DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_HEY, magic_hey_handler,
		3580	* EC_VER_MASK(0);
		3581	*/
		3582	#define EC_CMD_BOARD_SPECIFIC_BASE 0x3E00
		3583	#define EC_CMD_BOARD_SPECIFIC_LAST 0x3FFF
		3584
		3585	/*
		3586	* Given the private host command offset, calculate the true private host
		3587	* command value.
		3588	*/
		3589	#define EC_PRIVATE_HOST_COMMAND_VALUE(command) \
		3590	(EC_CMD_BOARD_SPECIFIC_BASE + (command))
3554		3591
3555	/*****************************************************************************/	3592	/*****************************************************************************/
3556	/*	3593	/*

mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values

Keyboard shortcuts

General

Issues and pull requests

Issues, pull requests and Inbox

Repository code