USAGE instructions for the Independent JPEG Group's JPEG software================================================================= This file describes usage of the JPEG conversion programs cjpeg and djpeg,as well as the utility programs jpegtran, rdjpgcom and wrjpgcom. (Seethe other documentation files if you wish to use the JPEG library withinyour own programs.) If you are on a Unix machine you may prefer to read the Unix-style manualpages in files cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1. INTRODUCTION These programs implement JPEG image compression and decompression. JPEG(pronounced "jay-peg") is a standardized compression method for full-colorand gray-scale images. JPEG is designed to handle "real-world" scenes,for example scanned photographs. Cartoons, line drawings, and othernon-realistic images are not JPEG's strong suit; on that sort of materialyou may get poor image quality and/or little compression. JPEG is lossy, meaning that the output image is not necessarily identical tothe input image. Hence you should not use JPEG if you have to have identicaloutput bits. However, on typical real-world images, very good compressionlevels can be obtained with no visible change, and amazingly high compressionis possible if you can tolerate a low-quality image. You can trade off imagequality against file size by adjusting the compressor's "quality" setting. GENERAL USAGE We provide two programs, cjpeg to compress an image file into JPEG format,and djpeg to decompress a JPEG file back into a conventional image format. On Unix-like systems, you say: cjpeg [switches] [imagefile] >jpegfileor djpeg [switches] [jpegfile] >imagefileThe programs read the specified input file, or standard input if none isnamed. They always write to standard output (with trace/error messages tostandard error). These conventions are handy for piping images betweenprograms. On most non-Unix systems, you say: cjpeg [switches] imagefile jpegfileor djpeg [switches] jpegfile imagefilei.e., both the input and output files are named on the command line. Thisstyle is a little more foolproof, and it loses no functionality if you don'thave pipes. (You can get this style on Unix too, if you prefer, by definingTWO_FILE_COMMANDLINE when you compile the programs; see install.doc.) You can also say: cjpeg [switches] -outfile jpegfile imagefileor djpeg [switches] -outfile imagefile jpegfileThis syntax works on all systems, so it is useful for scripts. The currently supported image file formats are: PPM (PBMPLUS color format),PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster Toolkitformat). (RLE is supported only if the URT library is available.)cjpeg recognizes the input image format automatically, with the exceptionof some Targa-format files. You have to tell djpeg which format to generate. JPEG files are in the defacto standard JFIF file format. There are other,less widely used JPEG-based file formats, but we don't support them. All switch names may be abbreviated; for example, -grayscale may be written-gray or -gr. Most of the "basic" switches can be abbreviated to as little asone letter. Upper and lower case are equivalent (-BMP is the same as -bmp).British spellings are also accepted (e.g., -greyscale), though for brevitythese are not mentioned below. CJPEG DETAILS The basic command line switches for cjpeg are: -quality N Scale quantization tables to adjust image quality. Quality is 0 (worst) to 100 (best); default is 75. (See below for more info.) -grayscale Create monochrome JPEG file from color input. Be sure to use this switch when compressing a grayscale BMP file, because cjpeg isn't bright enough to notice whether a BMP file uses only shades of gray. By saying -grayscale, you'll get a smaller JPEG file that takes less time to process. -optimize Perform optimization of entropy encoding parameters. Without this, default encoding parameters are used. -optimize usually makes the JPEG file a little smaller, but cjpeg runs somewhat slower and needs much more memory. Image quality and speed of decompression are unaffected by -optimize. -progressive Create progressive JPEG file (see below). -targa Input file is Targa format. Targa files that contain an "identification" field will not be automatically recognized by cjpeg; for such files you must specify -targa to make cjpeg treat the input as Targa format. For most Targa files, you won't need this switch. The -quality switch lets you trade off compressed file size against quality ofthe reconstructed image: the higher the quality setting, the larger the JPEGfile, and the closer the output image will be to the original input. Normallyyou want to use the lowest quality setting (smallest file) that decompressesinto something visually indistinguishable from the original image. For thispurpose the quality setting should be between 50 and 95; the default of 75 isoften about right. If you see defects at -quality 75, then go up 5 or 10counts at a time until you are happy with the output image. (The optimalsetting will vary from one image to another.) -quality 100 will generate a quantization table of all 1's, minimizing lossin the quantization step (but there is still information loss in subsampling,as well as roundoff error). This setting is mainly of interest forexperimental purposes. Quality values above about 95 are NOT recommended fornormal use; the compressed file size goes up dramatically for hardly any gainin output image quality. In the other direction, quality values below 50 will produce very small filesof low image quality. Settings around 5 to 10 might be useful in preparing anindex of a large image library, for example. Try -quality 2 (or so) for someamusing Cubist effects. (Note: quality values below about 25 generate 2-bytequantization tables, which are considered optional in the JPEG standard.cjpeg emits a warning message when you give such a quality value, because someother JPEG programs may be unable to decode the resulting file. Use -baselineif you need to ensure compatibility at low quality values.) The -progressive switch creates a "progressive JPEG" file. In this type ofJPEG file, the data is stored in multiple scans of increasing quality. If thefile is being transmitted over a slow communications link, the decoder can usethe first scan to display a low-quality image very quickly, and can thenimprove the display with each subsequent scan. The final image is exactlyequivalent to a standard JPEG file of the same quality setting, and the totalfile size is about the same --- often a little smaller. CAUTION: progressiveJPEG is not yet widely implemented, so many decoders will be unable to view aprogressive JPEG file at all. Switches for advanced users: -dct int Use integer DCT method (default). -dct fast Use fast integer DCT (less accurate). -dct float Use floating-point DCT method. The float method is very slightly more accurate than the int method, but is much slower unless your machine has very fast floating-point hardware. Also note that results of the floating-point method may vary slightly across machines, while the integer methods should give the same results everywhere. The fast integer method is much less accurate than the other two. -restart N Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is attached to the number. -restart 0 (the default) means no restart markers. -smooth N Smooth the input image to eliminate dithering noise. N, ranging from 1 to 100, indicates the strength of smoothing. 0 (the default) means no smoothing. -maxmemory N Set limit for amount of memory to use in processing large images. Value is in thousands of bytes, or millions of bytes if "M" is attached to the number. For example, -max 4m selects 4000000 bytes. If more space is needed, temporary files will be used. -verbose Enable debug printout. More -v's give more printout. or -debug Also, version information is printed at startup. The -restart option inserts extra markers that allow a JPEG decoder toresynchronize after a transmission error. Without restart markers, any damageto a compressed file will usually ruin the image from the point of the errorto the end of the image; with restart markers, the damage is usually confinedto the portion of the image up to the next restart marker. Of course, therestart markers occupy extra space. We recommend -restart 1 for images thatwill be transmitted across unreliable networks such as Usenet. The -smooth option filters the input to eliminate fine-scale noise. This isoften useful when converting dithered images to JPEG: a moderate smoothingfactor of 10 to 50 gets rid of dithering patterns in the input file, resultingin a smaller JPEG file and a better-looking image. Too large a smoothingfactor will visibly blur the image, however. Switches for wizards: -baseline Force baseline-compatible quantization tables to be generated. This clamps quantization values to 8 bits even at low quality settings. (This switch is poorly named, since it does not ensure that the output is actually baseline JPEG. For example, you can use -baseline and -progressive together.) -qtables file Use the quantization tables given in the specified text file. -qslots N[,...] Select which quantization table to use for each color component. -sample HxV[,...] Set JPEG sampling factors for each color component. -scans file Use the scan script given in the specified text file. The "wizard" switches are intended for experimentation with JPEG. If youdon't know what you are doing, DON'T USE THEM. These switches are documentedfurther in the file wizard.doc. DJPEG DETAILS The basic command line switches for djpeg are: -colors N Reduce image to at most N colors. This reduces the or -quantize N number of colors used in the output image, so that it can be displayed on a colormapped display or stored in a colormapped file format. For example, if you have an 8-bit display, you'd need to reduce to 256 or fewer colors. (-colors is the recommended name, -quantize is provided only for backwards compatibility.) -fast Select recommended processing options for fast, low quality output. (The default options are chosen for highest quality output.) Currently, this is equivalent to "-dct fast -nosmooth -onepass -dither ordered". -grayscale Force gray-scale output even if JPEG file is color. Useful for viewing on monochrome displays; also, djpeg runs noticeably faster in this mode. -scale M/N Scale the output image by a factor M/N. Currently the scale factor must be 1/1, 1/2, 1/4, or 1/8. Scaling is handy if the image is larger than your screen; also, djpeg runs much faster when scaling down the output. -bmp Select BMP output format (Windows flavor). 8-bit colormapped format is emitted if -colors or -grayscale is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color format is emitted. -gif Select GIF output format. Since GIF does not support more than 256 colors, -colors 256 is assumed (unless you specify a smaller number of colors). If you specify -fast, the default number of colors is 216. -os2 Select BMP output format (OS/2 1.x flavor). 8-bit colormapped format is emitted if -colors or -grayscale is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color format is emitted. -pnm Select PBMPLUS (PPM/PGM) output format (this is the default format). PGM is emitted if the JPEG file is gray-scale or if -grayscale is specified; otherwise PPM is emitted. -rle Select RLE output format. (Requires URT library.) -targa Select Targa output format. Gray-scale format is emitted if the JPEG file is gray-scale or if -grayscale is specified; otherwise, colormapped format is emitted if -colors is specified; otherwise, 24-bit full-color format is emitted. Switches for advanced users: -dct int Use integer DCT method (default). -dct fast Use fast integer DCT (less accurate). -dct float Use floating-point DCT method. The float method is very slightly more accurate than the int method, but is much slower unless your machine has very fast floating-point hardware. Also note that results of the floating-point method may vary slightly across machines, while the integer methods should give the same results everywhere. The fast integer method is much less accurate than the other two. -dither fs Use Floyd-Steinberg dithering in color quantization. -dither ordered Use ordered dithering in color quantization. -dither none Do not use dithering in color quantization. By default, Floyd-Steinberg dithering is applied when quantizing colors; this is slow but usually produces the best results. Ordered dither is a compromise between speed and quality; no dithering is fast but usually looks awful. Note that these switches have no effect unless color quantization is being done. Ordered dither is only available in -onepass mode. -map FILE Quantize to the colors used in the specified image file. This is useful for producing multiple files with identical color maps, or for forcing a predefined set of colors to be used. The FILE must be a GIF or PPM file. This option overrides -colors and -onepass. -nosmooth Use a faster, lower-quality upsampling routine. -onepass Use one-pass instead of two-pass color quantization. The one-pass method is faster and needs less memory, but it produces a lower-quality image. -onepass is ignored unless you also say -colors N. Also, the one-pass method is always used for gray-scale output (the two-pass method is no improvement then). -maxmemory N Set limit for amount of memory to use in processing large images. Value is in thousands of bytes, or millions of bytes if "M" is attached to the number. For example, -max 4m selects 4000000 bytes. If more space is needed, temporary files will be used. -verbose Enable debug printout. More -v's give more printout. or -debug Also, version information is printed at startup. HINTS FOR CJPEG Color GIF files are not the ideal input for JPEG; JPEG is really intended forcompressing full-color (24-bit) images. In particular, don't try to convertcartoons, line drawings, and other images that have only a few distinctcolors. GIF works great on these, JPEG does not. If you want to convert aGIF to JPEG, you should experiment with cjpeg's -quality and -smooth optionsto get a satisfactory conversion. -smooth 10 or so is often helpful. Avoid running an image through a series of JPEG compression/decompressioncycles. Image quality loss will accumulate; after ten or so cycles the imagemay be noticeably worse than it was after one cycle. It's best to use alossless format while manipulating an image, then convert to JPEG format whenyou are ready to file the image away. The -optimize option to cjpeg is worth using when you are making a "final"version for posting or archiving. It's also a win when you are using lowquality settings to make very small JPEG files; the percentage improvementis often a lot more than it is on larger files. (At present, -optimizemode is always selected when generating progressive JPEG files.) GIF input files are no longer supported, to avoid the Unisys LZW patent.Use a Unisys-licensed program if you need to read a GIF file. (Conversionof GIF files to JPEG is usually a bad idea anyway.) HINTS FOR DJPEG To get a quick preview of an image, use the -grayscale and/or -scale switches."-grayscale -scale 1/8" is the fastest case. Several options are available that trade off image quality to gain speed."-fast" turns on the recommended settings. "-dct fast" and/or "-nosmooth" gain speed at a small sacrifice in quality.When producing a color-quantized image, "-onepass -dither ordered" is fast butmuch lower quality than the default behavior. "-dither none" may giveacceptable results in two-pass mode, but is seldom tolerable in one-pass mode. If you are fortunate enough to have very fast floating point hardware,"-dct float" may be even faster than "-dct fast". But on most machines"-dct float" is slower than "-dct int"; in this case it is not worth using,because its theoretical accuracy advantage is too small to be significantin practice. Two-pass color quantization requires a good deal of memory; on MS-DOS machinesit may run out of memory even with -maxmemory 0. In that case you can stilldecompress, with some loss of image quality, by specifying -onepass forone-pass quantization. To avoid the Unisys LZW patent, djpeg produces uncompressed GIF files. Theseare larger than they should be, but are readable by standard GIF decoders. HINTS FOR BOTH PROGRAMS If more space is needed than will fit in the available main memory (asdetermined by -maxmemory), temporary files will be used. (MS-DOS versionswill try to get extended or expanded memory first.) The temporary files areoften rather large: in typical cases they occupy three bytes per pixel, forexample 3*800*600 = 1.44Mb for an 800x600 image. If you don't have enoughfree disk space, leave out -progressive and -optimize (for cjpeg) or specify-onepass (for djpeg). On MS-DOS, the temporary files are created in the directory named by the TMPor TEMP environment variable, or in the current directory if neither of thoseexist. Amiga implementations put the temp files in the directory named byJPEGTMP:, so be sure to assign JPEGTMP: to a disk partition with adequate freespace. The default memory usage limit (-maxmemory) is set when the software iscompiled. If you get an "insufficient memory" error, try specifying a smaller-maxmemory value, even -maxmemory 0 to use the absolute minimum space. Youmay want to recompile with a smaller default value if this happens often. On machines that have "environment" variables, you can define the environmentvariable JPEGMEM to set the default memory limit. The value is specified asdescribed for the -maxmemory switch. JPEGMEM overrides the default valuespecified when the program was compiled, and itself is overridden by anexplicit -maxmemory switch. On MS-DOS machines, -maxmemory is the amount of main (conventional) memory touse. (Extended or expanded memory is also used if available.) MostDOS-specific versions of this software do their own memory space estimationand do not need you to specify -maxmemory. JPEGTRAN jpegtran performs various useful transformations of JPEG files.It can translate the coded representation from one variant of JPEG to another,for example from baseline JPEG to progressive JPEG or vice versa. It can alsoperform some rearrangements of the image data, for example turning an imagefrom landscape to portrait format by rotation. jpegtran works by rearranging the compressed data (DCT coefficients), withoutever fully decoding the image. Therefore, its transformations are lossless:there is no image degradation at all, which would not be true if you useddjpeg followed by cjpeg to accomplish the same conversion. But by the sametoken, jpegtran cannot perform lossy operations such as changing the imagequality. jpegtran uses a command line syntax similar to cjpeg or djpeg.On Unix-like systems, you say: jpegtran [switches] [inputfile] >outputfileOn most non-Unix systems, you say: jpegtran [switches] inputfile outputfilewhere both the input and output files are JPEG files. To specify the coded JPEG representation used in the output file,jpegtran accepts a subset of the switches recognized by cjpeg: -optimize Perform optimization of entropy encoding parameters. -progressive Create progressive JPEG file. -restart N Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is attached to the number. -scans file Use the scan script given in the specified text file.See the previous discussion of cjpeg for more details about these switches.If you specify none of these switches, you get a plain baseline-JPEG outputfile. The quality setting and so forth are determined by the input file. The image can be losslessly transformed by giving one of these switches: -flip horizontal Mirror image horizontally (left-right). -flip vertical Mirror image vertically (top-bottom). -rotate 90 Rotate image 90 degrees clockwise. -rotate 180 Rotate image 180 degrees. -rotate 270 Rotate image 270 degrees clockwise (or 90 ccw). -transpose Transpose image (across UL-to-LR axis). -transverse Transverse transpose (across UR-to-LL axis). The transpose transformation has no restrictions regarding image dimensions.The other transformations operate rather oddly if the image dimensions are nota multiple of the iMCU size (usually 8 or 16 pixels), because they can onlytransform complete blocks of DCT coefficient data in the desired way. jpegtran's default behavior when transforming an odd-size image is designedto preserve exact reversibility and mathematical consistency of thetransformation set. As stated, transpose is able to flip the entire imagearea. Horizontal mirroring leaves any partial iMCU column at the right edgeuntouched, but is able to flip all rows of the image. Similarly, verticalmirroring leaves any partial iMCU row at the bottom edge untouched, but isable to flip all columns. The other transforms can be built up as sequencesof transpose and flip operations; for consistency, their actions on edgepixels are defined to be the same as the end result of the correspondingtranspose-and-flip sequence. For practical use, you may prefer to discard any untransformable edge pixelsrather than having a strange-looking strip along the right and/or bottom edgesof a transformed image. To do this, add the -trim switch: -trim Drop non-transformable edge blocks.Obviously, a transformation with -trim is not reversible, so strictly speakingjpegtran with this switch is not lossless. Also, the expected mathematicalequivalences between the transformations no longer hold. For example,"-rot 270 -trim" trims only the bottom edge, but "-rot 90 -trim" followed by"-rot 180 -trim" trims both edges. Another not-strictly-lossless transformation switch is: -grayscale Force grayscale output.This option discards the chrominance channels if the input image is YCbCr(ie, a standard color JPEG), resulting in a grayscale JPEG file. Theluminance channel is preserved exactly, so this is a better method of reducingto grayscale than decompression, conversion, and recompression. This switchis particularly handy for fixing a monochrome picture that was mistakenlyencoded as a color JPEG. (In such a case, the space savings from getting ridof the near-empty chroma channels won't be large; but the decoding time fora grayscale JPEG is substantially less than that for a color JPEG.) jpegtran also recognizes these switches that control what to do with "extra"markers, such as comment blocks: -copy none Copy no extra markers from source file. This setting suppresses all comments and other excess baggage present in the source file. -copy comments Copy only comment markers. This setting copies comments from the source file, but discards any other inessential data. -copy all Copy all extra markers. This setting preserves miscellaneous markers found in the source file, such as JFIF thumbnails and Photoshop settings. In some files these extra markers can be sizable.The default behavior is -copy comments. (Note: in IJG releases v6 and v6a,jpegtran always did the equivalent of -copy none.) Additional switches recognized by jpegtran are: -outfile filename -maxmemory N -verbose -debugThese work the same as in cjpeg or djpeg.Lines 1–500 of 562. Load more
USAGE instructions for the Independent JPEG Group's JPEG software ================================================================= This file describes usage of the JPEG conversion programs cjpeg and djpeg, as well as the utility programs jpegtran, rdjpgcom and wrjpgcom. (See the other documentation files if you wish to use the JPEG library within your own programs.) If you are on a Unix machine you may prefer to read the Unix-style manual pages in files cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1. INTRODUCTION These programs implement JPEG image compression and decompression. JPEG (pronounced "jay-peg") is a standardized compression method for full-color and gray-scale images. JPEG is designed to handle "real-world" scenes, for example scanned photographs. Cartoons, line drawings, and other non-realistic images are not JPEG's strong suit; on that sort of material you may get poor image quality and/or little compression. JPEG is lossy, meaning that the output image is not necessarily identical to the input image. Hence you should not use JPEG if you have to have identical output bits. However, on typical real-world images, very good compression levels can be obtained with no visible change, and amazingly high compression is possible if you can tolerate a low-quality image. You can trade off image quality against file size by adjusting the compressor's "quality" setting. GENERAL USAGE We provide two programs, cjpeg to compress an image file into JPEG format, and djpeg to decompress a JPEG file back into a conventional image format. On Unix-like systems, you say: cjpeg [switches] [imagefile] >jpegfile or djpeg [switches] [jpegfile] >imagefile The programs read the specified input file, or standard input if none is named. They always write to standard output (with trace/error messages to standard error). These conventions are handy for piping images between programs. On most non-Unix systems, you say: cjpeg [switches] imagefile jpegfile or djpeg [switches] jpegfile imagefile i.e., both the input and output files are named on the command line. This style is a little more foolproof, and it loses no functionality if you don't have pipes. (You can get this style on Unix too, if you prefer, by defining TWO_FILE_COMMANDLINE when you compile the programs; see install.doc.) You can also say: cjpeg [switches] -outfile jpegfile imagefile or djpeg [switches] -outfile imagefile jpegfile This syntax works on all systems, so it is useful for scripts. The currently supported image file formats are: PPM (PBMPLUS color format), PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster Toolkit format). (RLE is supported only if the URT library is available.) cjpeg recognizes the input image format automatically, with the exception of some Targa-format files. You have to tell djpeg which format to generate. JPEG files are in the defacto standard JFIF file format. There are other, less widely used JPEG-based file formats, but we don't support them. All switch names may be abbreviated; for example, -grayscale may be written -gray or -gr. Most of the "basic" switches can be abbreviated to as little as one letter. Upper and lower case are equivalent (-BMP is the same as -bmp). British spellings are also accepted (e.g., -greyscale), though for brevity these are not mentioned below. CJPEG DETAILS The basic command line switches for cjpeg are: -quality N Scale quantization tables to adjust image quality. Quality is 0 (worst) to 100 (best); default is 75. (See below for more info.) -grayscale Create monochrome JPEG file from color input. Be sure to use this switch when compressing a grayscale BMP file, because cjpeg isn't bright enough to notice whether a BMP file uses only shades of gray. By saying -grayscale, you'll get a smaller JPEG file that takes less time to process. -optimize Perform optimization of entropy encoding parameters. Without this, default encoding parameters are used. -optimize usually makes the JPEG file a little smaller, but cjpeg runs somewhat slower and needs much more memory. Image quality and speed of decompression are unaffected by -optimize. -progressive Create progressive JPEG file (see below). -targa Input file is Targa format. Targa files that contain an "identification" field will not be automatically recognized by cjpeg; for such files you must specify -targa to make cjpeg treat the input as Targa format. For most Targa files, you won't need this switch. The -quality switch lets you trade off compressed file size against quality of the reconstructed image: the higher the quality setting, the larger the JPEG file, and the closer the output image will be to the original input. Normally you want to use the lowest quality setting (smallest file) that decompresses into something visually indistinguishable from the original image. For this purpose the quality setting should be between 50 and 95; the default of 75 is often about right. If you see defects at -quality 75, then go up 5 or 10 counts at a time until you are happy with the output image. (The optimal setting will vary from one image to another.) -quality 100 will generate a quantization table of all 1's, minimizing loss in the quantization step (but there is still information loss in subsampling, as well as roundoff error). This setting is mainly of interest for experimental purposes. Quality values above about 95 are NOT recommended for normal use; the compressed file size goes up dramatically for hardly any gain in output image quality. In the other direction, quality values below 50 will produce very small files of low image quality. Settings around 5 to 10 might be useful in preparing an index of a large image library, for example. Try -quality 2 (or so) for some amusing Cubist effects. (Note: quality values below about 25 generate 2-byte quantization tables, which are considered optional in the JPEG standard. cjpeg emits a warning message when you give such a quality value, because some other JPEG programs may be unable to decode the resulting file. Use -baseline if you need to ensure compatibility at low quality values.) The -progressive switch creates a "progressive JPEG" file. In this type of JPEG file, the data is stored in multiple scans of increasing quality. If the file is being transmitted over a slow communications link, the decoder can use the first scan to display a low-quality image very quickly, and can then improve the display with each subsequent scan. The final image is exactly equivalent to a standard JPEG file of the same quality setting, and the total file size is about the same --- often a little smaller. CAUTION: progressive JPEG is not yet widely implemented, so many decoders will be unable to view a progressive JPEG file at all. Switches for advanced users: -dct int Use integer DCT method (default). -dct fast Use fast integer DCT (less accurate). -dct float Use floating-point DCT method. The float method is very slightly more accurate than the int method, but is much slower unless your machine has very fast floating-point hardware. Also note that results of the floating-point method may vary slightly across machines, while the integer methods should give the same results everywhere. The fast integer method is much less accurate than the other two. -restart N Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is attached to the number. -restart 0 (the default) means no restart markers. -smooth N Smooth the input image to eliminate dithering noise. N, ranging from 1 to 100, indicates the strength of smoothing. 0 (the default) means no smoothing. -maxmemory N Set limit for amount of memory to use in processing large images. Value is in thousands of bytes, or millions of bytes if "M" is attached to the number. For example, -max 4m selects 4000000 bytes. If more space is needed, temporary files will be used. -verbose Enable debug printout. More -v's give more printout. or -debug Also, version information is printed at startup. The -restart option inserts extra markers that allow a JPEG decoder to resynchronize after a transmission error. Without restart markers, any damage to a compressed file will usually ruin the image from the point of the error to the end of the image; with restart markers, the damage is usually confined to the portion of the image up to the next restart marker. Of course, the restart markers occupy extra space. We recommend -restart 1 for images that will be transmitted across unreliable networks such as Usenet. The -smooth option filters the input to eliminate fine-scale noise. This is often useful when converting dithered images to JPEG: a moderate smoothing factor of 10 to 50 gets rid of dithering patterns in the input file, resulting in a smaller JPEG file and a better-looking image. Too large a smoothing factor will visibly blur the image, however. Switches for wizards: -baseline Force baseline-compatible quantization tables to be generated. This clamps quantization values to 8 bits even at low quality settings. (This switch is poorly named, since it does not ensure that the output is actually baseline JPEG. For example, you can use -baseline and -progressive together.) -qtables file Use the quantization tables given in the specified text file. -qslots N[,...] Select which quantization table to use for each color component. -sample HxV[,...] Set JPEG sampling factors for each color component. -scans file Use the scan script given in the specified text file. The "wizard" switches are intended for experimentation with JPEG. If you don't know what you are doing, DON'T USE THEM. These switches are documented further in the file wizard.doc. DJPEG DETAILS The basic command line switches for djpeg are: -colors N Reduce image to at most N colors. This reduces the or -quantize N number of colors used in the output image, so that it can be displayed on a colormapped display or stored in a colormapped file format. For example, if you have an 8-bit display, you'd need to reduce to 256 or fewer colors. (-colors is the recommended name, -quantize is provided only for backwards compatibility.) -fast Select recommended processing options for fast, low quality output. (The default options are chosen for highest quality output.) Currently, this is equivalent to "-dct fast -nosmooth -onepass -dither ordered". -grayscale Force gray-scale output even if JPEG file is color. Useful for viewing on monochrome displays; also, djpeg runs noticeably faster in this mode. -scale M/N Scale the output image by a factor M/N. Currently the scale factor must be 1/1, 1/2, 1/4, or 1/8. Scaling is handy if the image is larger than your screen; also, djpeg runs much faster when scaling down the output. -bmp Select BMP output format (Windows flavor). 8-bit colormapped format is emitted if -colors or -grayscale is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color format is emitted. -gif Select GIF output format. Since GIF does not support more than 256 colors, -colors 256 is assumed (unless you specify a smaller number of colors). If you specify -fast, the default number of colors is 216. -os2 Select BMP output format (OS/2 1.x flavor). 8-bit colormapped format is emitted if -colors or -grayscale is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color format is emitted. -pnm Select PBMPLUS (PPM/PGM) output format (this is the default format). PGM is emitted if the JPEG file is gray-scale or if -grayscale is specified; otherwise PPM is emitted. -rle Select RLE output format. (Requires URT library.) -targa Select Targa output format. Gray-scale format is emitted if the JPEG file is gray-scale or if -grayscale is specified; otherwise, colormapped format is emitted if -colors is specified; otherwise, 24-bit full-color format is emitted. Switches for advanced users: -dct int Use integer DCT method (default). -dct fast Use fast integer DCT (less accurate). -dct float Use floating-point DCT method. The float method is very slightly more accurate than the int method, but is much slower unless your machine has very fast floating-point hardware. Also note that results of the floating-point method may vary slightly across machines, while the integer methods should give the same results everywhere. The fast integer method is much less accurate than the other two. -dither fs Use Floyd-Steinberg dithering in color quantization. -dither ordered Use ordered dithering in color quantization. -dither none Do not use dithering in color quantization. By default, Floyd-Steinberg dithering is applied when quantizing colors; this is slow but usually produces the best results. Ordered dither is a compromise between speed and quality; no dithering is fast but usually looks awful. Note that these switches have no effect unless color quantization is being done. Ordered dither is only available in -onepass mode. -map FILE Quantize to the colors used in the specified image file. This is useful for producing multiple files with identical color maps, or for forcing a predefined set of colors to be used. The FILE must be a GIF or PPM file. This option overrides -colors and -onepass. -nosmooth Use a faster, lower-quality upsampling routine. -onepass Use one-pass instead of two-pass color quantization. The one-pass method is faster and needs less memory, but it produces a lower-quality image. -onepass is ignored unless you also say -colors N. Also, the one-pass method is always used for gray-scale output (the two-pass method is no improvement then). -maxmemory N Set limit for amount of memory to use in processing large images. Value is in thousands of bytes, or millions of bytes if "M" is attached to the number. For example, -max 4m selects 4000000 bytes. If more space is needed, temporary files will be used. -verbose Enable debug printout. More -v's give more printout. or -debug Also, version information is printed at startup. HINTS FOR CJPEG Color GIF files are not the ideal input for JPEG; JPEG is really intended for compressing full-color (24-bit) images. In particular, don't try to convert cartoons, line drawings, and other images that have only a few distinct colors. GIF works great on these, JPEG does not. If you want to convert a GIF to JPEG, you should experiment with cjpeg's -quality and -smooth options to get a satisfactory conversion. -smooth 10 or so is often helpful. Avoid running an image through a series of JPEG compression/decompression cycles. Image quality loss will accumulate; after ten or so cycles the image may be noticeably worse than it was after one cycle. It's best to use a lossless format while manipulating an image, then convert to JPEG format when you are ready to file the image away. The -optimize option to cjpeg is worth using when you are making a "final" version for posting or archiving. It's also a win when you are using low quality settings to make very small JPEG files; the percentage improvement is often a lot more than it is on larger files. (At present, -optimize mode is always selected when generating progressive JPEG files.) GIF input files are no longer supported, to avoid the Unisys LZW patent. Use a Unisys-licensed program if you need to read a GIF file. (Conversion of GIF files to JPEG is usually a bad idea anyway.) HINTS FOR DJPEG To get a quick preview of an image, use the -grayscale and/or -scale switches. "-grayscale -scale 1/8" is the fastest case. Several options are available that trade off image quality to gain speed. "-fast" turns on the recommended settings. "-dct fast" and/or "-nosmooth" gain speed at a small sacrifice in quality. When producing a color-quantized image, "-onepass -dither ordered" is fast but much lower quality than the default behavior. "-dither none" may give acceptable results in two-pass mode, but is seldom tolerable in one-pass mode. If you are fortunate enough to have very fast floating point hardware, "-dct float" may be even faster than "-dct fast". But on most machines "-dct float" is slower than "-dct int"; in this case it is not worth using, because its theoretical accuracy advantage is too small to be significant in practice. Two-pass color quantization requires a good deal of memory; on MS-DOS machines it may run out of memory even with -maxmemory 0. In that case you can still decompress, with some loss of image quality, by specifying -onepass for one-pass quantization. To avoid the Unisys LZW patent, djpeg produces uncompressed GIF files. These are larger than they should be, but are readable by standard GIF decoders. HINTS FOR BOTH PROGRAMS If more space is needed than will fit in the available main memory (as determined by -maxmemory), temporary files will be used. (MS-DOS versions will try to get extended or expanded memory first.) The temporary files are often rather large: in typical cases they occupy three bytes per pixel, for example 3*800*600 = 1.44Mb for an 800x600 image. If you don't have enough free disk space, leave out -progressive and -optimize (for cjpeg) or specify -onepass (for djpeg). On MS-DOS, the temporary files are created in the directory named by the TMP or TEMP environment variable, or in the current directory if neither of those exist. Amiga implementations put the temp files in the directory named by JPEGTMP:, so be sure to assign JPEGTMP: to a disk partition with adequate free space. The default memory usage limit (-maxmemory) is set when the software is compiled. If you get an "insufficient memory" error, try specifying a smaller -maxmemory value, even -maxmemory 0 to use the absolute minimum space. You may want to recompile with a smaller default value if this happens often. On machines that have "environment" variables, you can define the environment variable JPEGMEM to set the default memory limit. The value is specified as described for the -maxmemory switch. JPEGMEM overrides the default value specified when the program was compiled, and itself is overridden by an explicit -maxmemory switch. On MS-DOS machines, -maxmemory is the amount of main (conventional) memory to use. (Extended or expanded memory is also used if available.) Most DOS-specific versions of this software do their own memory space estimation and do not need you to specify -maxmemory. JPEGTRAN jpegtran performs various useful transformations of JPEG files. It can translate the coded representation from one variant of JPEG to another, for example from baseline JPEG to progressive JPEG or vice versa. It can also perform some rearrangements of the image data, for example turning an image from landscape to portrait format by rotation. jpegtran works by rearranging the compressed data (DCT coefficients), without ever fully decoding the image. Therefore, its transformations are lossless: there is no image degradation at all, which would not be true if you used djpeg followed by cjpeg to accomplish the same conversion. But by the same token, jpegtran cannot perform lossy operations such as changing the image quality. jpegtran uses a command line syntax similar to cjpeg or djpeg. On Unix-like systems, you say: jpegtran [switches] [inputfile] >outputfile On most non-Unix systems, you say: jpegtran [switches] inputfile outputfile where both the input and output files are JPEG files. To specify the coded JPEG representation used in the output file, jpegtran accepts a subset of the switches recognized by cjpeg: -optimize Perform optimization of entropy encoding parameters. -progressive Create progressive JPEG file. -restart N Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is attached to the number. -scans file Use the scan script given in the specified text file. See the previous discussion of cjpeg for more details about these switches. If you specify none of these switches, you get a plain baseline-JPEG output file. The quality setting and so forth are determined by the input file. The image can be losslessly transformed by giving one of these switches: -flip horizontal Mirror image horizontally (left-right). -flip vertical Mirror image vertically (top-bottom). -rotate 90 Rotate image 90 degrees clockwise. -rotate 180 Rotate image 180 degrees. -rotate 270 Rotate image 270 degrees clockwise (or 90 ccw). -transpose Transpose image (across UL-to-LR axis). -transverse Transverse transpose (across UR-to-LL axis). The transpose transformation has no restrictions regarding image dimensions. The other transformations operate rather oddly if the image dimensions are not a multiple of the iMCU size (usually 8 or 16 pixels), because they can only transform complete blocks of DCT coefficient data in the desired way. jpegtran's default behavior when transforming an odd-size image is designed to preserve exact reversibility and mathematical consistency of the transformation set. As stated, transpose is able to flip the entire image area. Horizontal mirroring leaves any partial iMCU column at the right edge untouched, but is able to flip all rows of the image. Similarly, vertical mirroring leaves any partial iMCU row at the bottom edge untouched, but is able to flip all columns. The other transforms can be built up as sequences of transpose and flip operations; for consistency, their actions on edge pixels are defined to be the same as the end result of the corresponding transpose-and-flip sequence. For practical use, you may prefer to discard any untransformable edge pixels rather than having a strange-looking strip along the right and/or bottom edges of a transformed image. To do this, add the -trim switch: -trim Drop non-transformable edge blocks. Obviously, a transformation with -trim is not reversible, so strictly speaking jpegtran with this switch is not lossless. Also, the expected mathematical equivalences between the transformations no longer hold. For example, "-rot 270 -trim" trims only the bottom edge, but "-rot 90 -trim" followed by "-rot 180 -trim" trims both edges. Another not-strictly-lossless transformation switch is: -grayscale Force grayscale output. This option discards the chrominance channels if the input image is YCbCr (ie, a standard color JPEG), resulting in a grayscale JPEG file. The luminance channel is preserved exactly, so this is a better method of reducing to grayscale than decompression, conversion, and recompression. This switch is particularly handy for fixing a monochrome picture that was mistakenly encoded as a color JPEG. (In such a case, the space savings from getting rid of the near-empty chroma channels won't be large; but the decoding time for a grayscale JPEG is substantially less than that for a color JPEG.) jpegtran also recognizes these switches that control what to do with "extra" markers, such as comment blocks: -copy none Copy no extra markers from source file. This setting suppresses all comments and other excess baggage present in the source file. -copy comments Copy only comment markers. This setting copies comments from the source file, but discards any other inessential data. -copy all Copy all extra markers. This setting preserves miscellaneous markers found in the source file, such as JFIF thumbnails and Photoshop settings. In some files these extra markers can be sizable. The default behavior is -copy comments. (Note: in IJG releases v6 and v6a, jpegtran always did the equivalent of -copy none.) Additional switches recognized by jpegtran are: -outfile filename -maxmemory N -verbose -debug These work the same as in cjpeg or djpeg.