////  SerialInterface.cpp//  2012 by Philip Rosedale for High Fidelity Inc.////  Read interface data from the gyros/accelerometer board using SerialUSB////  Channels are received in the following order (integer 0-4096 based on voltage 0-3.3v)////  0 - AIN 15:  Pitch Gyro (nodding your head 'yes')//  1 - AIN 16:  Yaw Gyro (shaking your head 'no')//  2 - AIN 17:  Roll Gyro (looking quizzical, tilting your head)//  3 - AIN 18:  Lateral acceleration (moving from side-to-side in front of your monitor)//  4 - AIN 19:  Up/Down acceleration (sitting up/ducking in front of your monitor)//  5 - AIN 20:  Forward/Back acceleration (Toward or away from your monitor)// #include "SerialInterface.h" #ifdef __APPLE__#include <regex.h>#include <sys/time.h>#endif int serialFd;const int MAX_BUFFER = 255;char serialBuffer[MAX_BUFFER];int serialBufferPos = 0; const int ZERO_OFFSET = 2048;const short NO_READ_MAXIMUM_MSECS = 3000;const short SAMPLES_TO_DISCARD = 100;               //  Throw out the first few samplesconst int GRAVITY_SAMPLES = 200;                    //  Use the first samples to compute gravity vector void SerialInterface::pair() {    #ifdef __APPLE__    // look for a matching gyro setup    DIR *devDir;    struct dirent *entry;    int matchStatus;    regex_t regex;        // for now this only works on OS X, where the usb serial shows up as /dev/tty.usb*    if((devDir = opendir("/dev"))) {        while((entry = readdir(devDir))) {            regcomp(&regex, "tty\\.usb", REG_EXTENDED|REG_NOSUB);            matchStatus = regexec(&regex, entry->d_name, (size_t) 0, NULL, 0);            if (matchStatus == 0) {                char *serialPortname = new char[100];                sprintf(serialPortname, "/dev/%s", entry->d_name);                                initializePort(serialPortname, 115200);                                delete [] serialPortname;            }            regfree(&regex);        }        closedir(devDir);    }#endif    } //  Connect to the serial portint SerialInterface::initializePort(char* portname, int baud){#ifdef __APPLE__    serialFd = open(portname, O_RDWR | O_NOCTTY | O_NDELAY);        printLog("Opening SerialUSB %s: ", portname);        if (serialFd == -1) {        printLog("Failed.\n");        return -1;     //  Failed to open port    }        struct termios options;    tcgetattr(serialFd,&options);    switch(baud)    {		case 9600: cfsetispeed(&options,B9600);			cfsetospeed(&options,B9600);			break;		case 19200: cfsetispeed(&options,B19200);			cfsetospeed(&options,B19200);			break;		case 38400: cfsetispeed(&options,B38400);			cfsetospeed(&options,B38400);			break;		case 115200: cfsetispeed(&options,B115200);			cfsetospeed(&options,B115200);			break;		default:cfsetispeed(&options,B9600);			cfsetospeed(&options,B9600);			break;    }    options.c_cflag |= (CLOCAL | CREAD);    options.c_cflag &= ~PARENB;    options.c_cflag &= ~CSTOPB;    options.c_cflag &= ~CSIZE;    options.c_cflag |= CS8;    tcsetattr(serialFd,TCSANOW,&options);         printLog("Connected.\n");    resetSerial();        active = true; #endif       return 0;} //  Reset Trailing averages to the current measurementvoid SerialInterface::resetTrailingAverages() {    for (int i = 1; i < NUM_CHANNELS; i++)  trailingAverage[i] = lastMeasured[i];} //  Render the serial interface channel values onscreen as vertical linesvoid SerialInterface::renderLevels(int width, int height) {    int i;    int disp_x = 10;    const int GAP = 16;    char val[10];    for(i = 0; i < NUM_CHANNELS; i++)    {                //  Actual value        glLineWidth(2.0);        glColor4f(1, 1, 1, 1);        glBegin(GL_LINES);        glVertex2f(disp_x, height*0.95);        glVertex2f(disp_x, height*(0.25 + 0.75f*getValue(i)/4096));        glColor4f(1, 0, 0, 1);        glVertex2f(disp_x - 3, height*(0.25 + 0.75f*getValue(i)/4096));        glVertex2f(disp_x, height*(0.25 + 0.75f*getValue(i)/4096));        glEnd();        //  Trailing Average value        glBegin(GL_LINES);        glColor4f(1, 1, 1, 1);        glVertex2f(disp_x, height*(0.25 + 0.75f*getTrailingValue(i)/4096));        glVertex2f(disp_x + 4, height*(0.25 + 0.75f*getTrailingValue(i)/4096));        glEnd();                sprintf(val, "%d", getValue(i));        drawtext(disp_x-GAP/2, (height*0.95)+2, 0.08, 90, 1.0, 0, val, 0, 1, 0);                disp_x += GAP;    }    //  Display Serial latency block    if (LED) {        glColor3f(1,0,0);        glBegin(GL_QUADS); {            glVertex2f(width - 100, height - 100);            glVertex2f(width, height - 100);            glVertex2f(width, height);            glVertex2f(width - 100, height);        }        glEnd();    } }void SerialInterface::readData() {#ifdef __APPLE__    //  This array sets the rate of trailing averaging for each channel:    //  If the sensor rate is 100Hz, 0.001 will make the long term average a 10-second average    const float AVG_RATE[] =  {0.002, 0.002, 0.002, 0.002, 0.002, 0.002};    char bufchar[1];        int initialSamples = totalSamples;        while (read(serialFd, &bufchar, 1) > 0) {                //std::cout << bufchar[0];        serialBuffer[serialBufferPos] = bufchar[0];        serialBufferPos++;        //  Have we reached end of a line of input?        if ((bufchar[0] == '\n') || (serialBufferPos >= MAX_BUFFER)) {            std::string serialLine(serialBuffer, serialBufferPos-1);            //std::cout << serialLine << "\n";            int spot;            //int channel = 0;            std::string val;            for (int i = 0; i < NUM_CHANNELS + 2; i++) {                spot = serialLine.find_first_of(" ", 0);                if (spot != std::string::npos) {                    val = serialLine.substr(0,spot);                    //std::cout << val << "\n";                    if (i < NUM_CHANNELS) lastMeasured[i] = atoi(val.c_str());                    else samplesAveraged = atoi(val.c_str());                } else LED = atoi(serialLine.c_str());                serialLine = serialLine.substr(spot+1, serialLine.length() - spot - 1);            }                        //  Update Trailing Averages            for (int i = 0; i < NUM_CHANNELS; i++) {                if (totalSamples > SAMPLES_TO_DISCARD) {                    trailingAverage[i] = (1.f - AVG_RATE[i])*trailingAverage[i] +                        AVG_RATE[i]*(float)lastMeasured[i];                } else {                    trailingAverage[i] = (float)lastMeasured[i];                }                               }                        //  Use a set of initial samples to compute gravity             if (totalSamples < GRAVITY_SAMPLES) {                gravity.x += lastMeasured[ACCEL_X];                gravity.y += lastMeasured[ACCEL_Y];                gravity.z += lastMeasured[ACCEL_Z];            }            if (totalSamples == GRAVITY_SAMPLES) {                gravity = glm::normalize(gravity);                std::cout << "gravity: " << gravity.x << "," <<                            gravity.y << "," << gravity.z << "\n";            }             totalSamples++;            serialBufferPos = 0;        }    }        if (initialSamples == totalSamples) {                timeval now;        gettimeofday(&now, NULL);                if (diffclock(&lastGoodRead, &now) > NO_READ_MAXIMUM_MSECS) {            std::cout << "No data - Shutting down SerialInterface.\n";            resetSerial();        }    } else {        gettimeofday(&lastGoodRead, NULL);    }#endif} void SerialInterface::resetSerial() {#ifdef __APPLE__    active = false;    totalSamples = 0;    gravity = glm::vec3(0,-1,0);        gettimeofday(&lastGoodRead, NULL);        //  Clear the measured and average channel data    for (int i = 0; i < NUM_CHANNELS; i++) {        lastMeasured[i] = 0;        trailingAverage[i] = 0.0;    }    //  Clear serial input buffer    for (int i = 1; i < MAX_BUFFER; i++) {        serialBuffer[i] = ' ';    }#endif}