{ // The name of the Zed theme to use for the UI "theme": "One Dark", // The name of a base set of key bindings to use. // This setting can take four values, each named after another // text editor: // // 1. "VSCode" // 2. "JetBrains" // 3. "SublimeText" // 4. "Atom" "base_keymap": "VSCode", // Features that can be globally enabled or disabled "features": { // Show Copilot icon in status bar "copilot": true }, // The name of a font to use for rendering text in the editor "buffer_font_family": "Zed Mono", // The OpenType features to enable for text in the editor. "buffer_font_features": { // Disable ligatures: // "calt": false }, // The default font size for text in the editor "buffer_font_size": 15, // Set the buffer's line height. // May take 3 values: // 1. Use a line height that's comfortable for reading (1.618) // "line_height": "comfortable" // 2. Use a standard line height, (1.3) // "line_height": "standard", // 3. Use a custom line height // "line_height": { // "custom": 2 // }, "buffer_line_height": "comfortable", // The factor to grow the active pane by. Defaults to 1.0 // which gives the same size as all other panes. "active_pane_magnification": 1.0, // Whether to enable vim modes and key bindings "vim_mode": false, // Whether to show the informational hover box when moving the mouse // over symbols in the editor. "hover_popover_enabled": true, // Whether to confirm before quitting Zed. "confirm_quit": false, // Whether the cursor blinks in the editor. "cursor_blink": true, // Whether to pop the completions menu while typing in an editor without // explicitly requesting it. "show_completions_on_input": true, // Whether to show wrap guides in the editor. Setting this to true will // show a guide at the 'preferred_line_length' value if softwrap is set to // 'preferred_line_length', and will show any additional guides as specified // by the 'wrap_guides' setting. "show_wrap_guides": true, // Character counts at which to show wrap guides in the editor. "wrap_guides": [], // Whether to use additional LSP queries to format (and amend) the code after // every "trigger" symbol input, defined by LSP server capabilities. "use_on_type_format": true, // Controls whether copilot provides suggestion immediately // or waits for a `copilot::Toggle` "show_copilot_suggestions": true, // Whether to show tabs and spaces in the editor. // This setting can take two values: // // 1. Draw tabs and spaces only for the selected text (default): // "selection" // 2. Do not draw any tabs or spaces: // "none" // 3. Draw all invisible symbols: // "all" "show_whitespaces": "selection", // Settings related to calls in Zed "calls": { // Join calls with the microphone muted by default "mute_on_join": true }, // Scrollbar related settings "scrollbar": { // When to show the scrollbar in the editor. // This setting can take four values: // // 1. Show the scrollbar if there's important information or // follow the system's configured behavior (default): // "auto" // 2. Match the system's configured behavior: // "system" // 3. Always show the scrollbar: // "always" // 4. Never show the scrollbar: // "never" "show": "auto", // Whether to show git diff indicators in the scrollbar. "git_diff": true, // Whether to show selections in the scrollbar. "selections": true }, "relative_line_numbers": false, // Inlay hint related settings "inlay_hints": { // Global switch to toggle hints on and off, switched off by default. "enabled": false, // Toggle certain types of hints on and off, all switched on by default. "show_type_hints": true, "show_parameter_hints": true, // Corresponds to null/None LSP hint type value. "show_other_hints": true }, "project_panel": { // Default width of the project panel. "default_width": 240, // Where to dock project panel. Can be 'left' or 'right'. "dock": "left", // Whether to show file icons in the project panel. "file_icons": true, // Whether to show folder icons or chevrons for directories in the project panel. "folder_icons": true, // Whether to show the git status in the project panel. "git_status": true, // Amount of indentation for nested items. "indent_size": 20 }, "collaboration_panel": { // Whether to show the collaboration panel button in the status bar. "button": true, // Where to dock channels panel. Can be 'left' or 'right'. "dock": "left", // Default width of the channels panel. "default_width": 240 }, "assistant": { // Whether to show the assistant panel button in the status bar. "button": true, // Where to dock the assistant. Can be 'left', 'right' or 'bottom'. "dock": "right", // Default width when the assistant is docked to the left or right. "default_width": 640, // Default height when the assistant is docked to the bottom. "default_height": 320, // The default OpenAI model to use when starting new conversations. This // setting can take two values: // // 1. "gpt-3.5-turbo-0613"" // 2. "gpt-4-0613"" "default_open_ai_model": "gpt-4-0613" }, // Whether the screen sharing icon is shown in the os status bar. "show_call_status_icon": true, // Whether to use language servers to provide code intelligence. "enable_language_server": true, // When to automatically save edited buffers. This setting can // take four values. // // 1. Never automatically save: // "autosave": "off", // 2. Save when changing focus away from the Zed window: // "autosave": "on_window_change", // 3. Save when changing focus away from a specific buffer: // "autosave": "on_focus_change", // 4. Save when idle for a certain amount of time: // "autosave": { "after_delay": {"milliseconds": 500} }, "autosave": "off", // Settings related to the editor's tabs "tabs": { // Show git status colors in the editor tabs. "git_status": false, // Position of the close button on the editor tabs. "close_position": "right" }, // Whether or not to remove any trailing whitespace from lines of a buffer // before saving it. "remove_trailing_whitespace_on_save": true, // Whether to start a new line with a comment when a previous line is a comment as well. "extend_comment_on_newline": true, // Whether or not to ensure there's a single newline at the end of a buffer // when saving it. "ensure_final_newline_on_save": true, // Whether or not to perform a buffer format before saving "format_on_save": "on", // How to perform a buffer format. This setting can take two values: // // 1. Format code using the current language server: // "formatter": "language_server" // 2. Format code using an external command: // "formatter": { // "external": { // "command": "prettier", // "arguments": ["--stdin-filepath", "{buffer_path}"] // } // } "formatter": "language_server", // How to soft-wrap long lines of text. This setting can take // three values: // // 1. Do not soft wrap. // "soft_wrap": "none", // 2. Soft wrap lines that overflow the editor: // "soft_wrap": "editor_width", // 3. Soft wrap lines at the preferred line length // "soft_wrap": "preferred_line_length", "soft_wrap": "none", // The column at which to soft-wrap lines, for buffers where soft-wrap // is enabled. "preferred_line_length": 80, // Whether to indent lines using tab characters, as opposed to multiple // spaces. "hard_tabs": false, // How many columns a tab should occupy. "tab_size": 4, // Control what info is collected by Zed. "telemetry": { // Send debug info like crash reports. "diagnostics": true, // Send anonymized usage data like what languages you're using Zed with. "metrics": true }, // Automatically update Zed "auto_update": true, // Git gutter behavior configuration. "git": { // Control whether the git gutter is shown. May take 2 values: // 1. Show the gutter // "git_gutter": "tracked_files" // 2. Hide the gutter // "git_gutter": "hide" "git_gutter": "tracked_files" }, "copilot": { // The set of glob patterns for which copilot should be disabled // in any matching file. "disabled_globs": [ ".env" ] }, // Settings specific to journaling "journal": { // The path of the directory where journal entries are stored "path": "~", // What format to display the hours in // May take 2 values: // 1. hour12 // 2. hour24 "hour_format": "hour12" }, // Settings specific to the terminal "terminal": { // What shell to use when opening a terminal. May take 3 values: // 1. Use the system's default terminal configuration in /etc/passwd // "shell": "system" // 2. A program: // "shell": { // "program": "sh" // } // 3. A program with arguments: // "shell": { // "with_arguments": { // "program": "/bin/bash", // "arguments": ["--login"] // } // } "shell": "system", // Where to dock terminals panel. Can be 'left', 'right', 'bottom'. "dock": "bottom", // Default width when the terminal is docked to the left or right. "default_width": 640, // Default height when the terminal is docked to the bottom. "default_height": 320, // What working directory to use when launching the terminal. // May take 4 values: // 1. Use the current file's project directory. Will Fallback to the // first project directory strategy if unsuccessful // "working_directory": "current_project_directory" // 2. Use the first project in this workspace's directory // "working_directory": "first_project_directory" // 3. Always use this platform's home directory (if we can find it) // "working_directory": "always_home" // 4. Always use a specific directory. This value will be shell expanded. // If this path is not a valid directory the terminal will default to // this platform's home directory (if we can find it) // "working_directory": { // "always": { // "directory": "~/zed/projects/" // } // } "working_directory": "current_project_directory", // Set the cursor blinking behavior in the terminal. // May take 4 values: // 1. Never blink the cursor, ignoring the terminal mode // "blinking": "off", // 2. Default the cursor blink to off, but allow the terminal to // set blinking // "blinking": "terminal_controlled", // 3. Always blink the cursor, ignoring the terminal mode // "blinking": "on", "blinking": "terminal_controlled", // Set whether Alternate Scroll mode (code: ?1007) is active by default. // Alternate Scroll mode converts mouse scroll events into up / down key // presses when in the alternate screen (e.g. when running applications // like vim or less). The terminal can still set and unset this mode. // May take 2 values: // 1. Default alternate scroll mode to on // "alternate_scroll": "on", // 2. Default alternate scroll mode to off // "alternate_scroll": "off", "alternate_scroll": "off", // Set whether the option key behaves as the meta key. // May take 2 values: // 1. Rely on default platform handling of option key, on macOS // this means generating certain unicode characters // "option_to_meta": false, // 2. Make the option keys behave as a 'meta' key, e.g. for emacs // "option_to_meta": true, "option_as_meta": false, // Whether or not selecting text in the terminal will automatically // copy to the system clipboard. "copy_on_select": false, // Any key-value pairs added to this list will be added to the terminal's // environment. Use `:` to separate multiple values. "env": { // "KEY": "value1:value2" }, // Set the terminal's line height. // May take 3 values: // 1. Use a line height that's comfortable for reading, 1.618 // "line_height": "comfortable" // 2. Use a standard line height, 1.3. This option is useful for TUIs, // particularly if they use box characters // "line_height": "standard", // 3. Use a custom line height. // "line_height": { // "custom": 2 // }, "line_height": "comfortable", // Activate the python virtual environment, if one is found, in the // terminal's working directory (as resolved by the working_directory // setting). Set this to "off" to disable this behavior. "detect_venv": { "on": { // Default directories to search for virtual environments, relative // to the current working directory. We recommend overriding this // in your project's settings, rather than globally. "directories": [ ".env", "env", ".venv", "venv" ], // Can also be 'csh' and 'fish' "activate_script": "default" } } // Set the terminal's font size. If this option is not included, // the terminal will default to matching the buffer's font size. // "font_size": "15", // Set the terminal's font family. If this option is not included, // the terminal will default to matching the buffer's font family. // "font_family": "Zed Mono", // --- }, // Difference settings for semantic_index "semantic_index": { "enabled": false, "reindexing_delay_seconds": 600 }, // Different settings for specific languages. "languages": { "Plain Text": { "soft_wrap": "preferred_line_length" }, "Elixir": { "tab_size": 2 }, "Go": { "tab_size": 4, "hard_tabs": true }, "Markdown": { "soft_wrap": "preferred_line_length" }, "JavaScript": { "tab_size": 2 }, "TypeScript": { "tab_size": 2 }, "TSX": { "tab_size": 2 }, "YAML": { "tab_size": 2 }, "JSON": { "tab_size": 2 } }, // LSP Specific settings. "lsp": { // Specify the LSP name as a key here. // "rust-analyzer": { // //These initialization options are merged into Zed's defaults // "initialization_options": { // "checkOnSave": { // "command": "clippy" // } // } // } }}
{
// The name of the Zed theme to use for the UI
"theme": "One Dark",
// The name of a base set of key bindings to use.
// This setting can take four values, each named after another
// text editor:
//
// 1. "VSCode"
// 2. "JetBrains"
// 3. "SublimeText"
// 4. "Atom"
"base_keymap": "VSCode",
// Features that can be globally enabled or disabled
"features": {
// Show Copilot icon in status bar
"copilot": true
},
// The name of a font to use for rendering text in the editor
"buffer_font_family": "Zed Mono",
// The OpenType features to enable for text in the editor.
"buffer_font_features": {
// Disable ligatures:
// "calt": false
},
// The default font size for text in the editor
"buffer_font_size": 15,
// Set the buffer's line height.
// May take 3 values:
// 1. Use a line height that's comfortable for reading (1.618)
// "line_height": "comfortable"
// 2. Use a standard line height, (1.3)
// "line_height": "standard",
// 3. Use a custom line height
// "line_height": {
// "custom": 2
// },
"buffer_line_height": "comfortable",
// The factor to grow the active pane by. Defaults to 1.0
// which gives the same size as all other panes.
"active_pane_magnification": 1.0,
// Whether to enable vim modes and key bindings
"vim_mode": false,
// Whether to show the informational hover box when moving the mouse
// over symbols in the editor.
"hover_popover_enabled": true,
// Whether to confirm before quitting Zed.
"confirm_quit": false,
// Whether the cursor blinks in the editor.
"cursor_blink": true,
// Whether to pop the completions menu while typing in an editor without
// explicitly requesting it.
"show_completions_on_input": true,
// Whether to show wrap guides in the editor. Setting this to true will
// show a guide at the 'preferred_line_length' value if softwrap is set to
// 'preferred_line_length', and will show any additional guides as specified
// by the 'wrap_guides' setting.
"show_wrap_guides": true,
// Character counts at which to show wrap guides in the editor.
"wrap_guides": [],
// Whether to use additional LSP queries to format (and amend) the code after
// every "trigger" symbol input, defined by LSP server capabilities.
"use_on_type_format": true,
// Controls whether copilot provides suggestion immediately
// or waits for a `copilot::Toggle`
"show_copilot_suggestions": true,
// Whether to show tabs and spaces in the editor.
// This setting can take two values:
//
// 1. Draw tabs and spaces only for the selected text (default):
// "selection"
// 2. Do not draw any tabs or spaces:
// "none"
// 3. Draw all invisible symbols:
// "all"
"show_whitespaces": "selection",
// Settings related to calls in Zed
"calls": {
// Join calls with the microphone muted by default
"mute_on_join": true
},
// Scrollbar related settings
"scrollbar": {
// When to show the scrollbar in the editor.
// This setting can take four values:
//
// 1. Show the scrollbar if there's important information or
// follow the system's configured behavior (default):
// "auto"
// 2. Match the system's configured behavior:
// "system"
// 3. Always show the scrollbar:
// "always"
// 4. Never show the scrollbar:
// "never"
"show": "auto",
// Whether to show git diff indicators in the scrollbar.
"git_diff": true,
// Whether to show selections in the scrollbar.
"selections": true
},
"relative_line_numbers": false,
// Inlay hint related settings
"inlay_hints": {
// Global switch to toggle hints on and off, switched off by default.
"enabled": false,
// Toggle certain types of hints on and off, all switched on by default.
"show_type_hints": true,
"show_parameter_hints": true,
// Corresponds to null/None LSP hint type value.
"show_other_hints": true
},
"project_panel": {
// Default width of the project panel.
"default_width": 240,
// Where to dock project panel. Can be 'left' or 'right'.
"dock": "left",
// Whether to show file icons in the project panel.
"file_icons": true,
// Whether to show folder icons or chevrons for directories in the project panel.
"folder_icons": true,
// Whether to show the git status in the project panel.
"git_status": true,
// Amount of indentation for nested items.
"indent_size": 20
},
"collaboration_panel": {
// Whether to show the collaboration panel button in the status bar.
"button": true,
// Where to dock channels panel. Can be 'left' or 'right'.
"dock": "left",
// Default width of the channels panel.
"default_width": 240
},
"assistant": {
// Whether to show the assistant panel button in the status bar.
"button": true,
// Where to dock the assistant. Can be 'left', 'right' or 'bottom'.
"dock": "right",
// Default width when the assistant is docked to the left or right.
"default_width": 640,
// Default height when the assistant is docked to the bottom.
"default_height": 320,
// The default OpenAI model to use when starting new conversations. This
// setting can take two values:
//
// 1. "gpt-3.5-turbo-0613""
// 2. "gpt-4-0613""
"default_open_ai_model": "gpt-4-0613"
},
// Whether the screen sharing icon is shown in the os status bar.
"show_call_status_icon": true,
// Whether to use language servers to provide code intelligence.
"enable_language_server": true,
// When to automatically save edited buffers. This setting can
// take four values.
//
// 1. Never automatically save:
// "autosave": "off",
// 2. Save when changing focus away from the Zed window:
// "autosave": "on_window_change",
// 3. Save when changing focus away from a specific buffer:
// "autosave": "on_focus_change",
// 4. Save when idle for a certain amount of time:
// "autosave": { "after_delay": {"milliseconds": 500} },
"autosave": "off",
// Settings related to the editor's tabs
"tabs": {
// Show git status colors in the editor tabs.
"git_status": false,
// Position of the close button on the editor tabs.
"close_position": "right"
},
// Whether or not to remove any trailing whitespace from lines of a buffer
// before saving it.
"remove_trailing_whitespace_on_save": true,
// Whether to start a new line with a comment when a previous line is a comment as well.
"extend_comment_on_newline": true,
// Whether or not to ensure there's a single newline at the end of a buffer
// when saving it.
"ensure_final_newline_on_save": true,
// Whether or not to perform a buffer format before saving
"format_on_save": "on",
// How to perform a buffer format. This setting can take two values:
//
// 1. Format code using the current language server:
// "formatter": "language_server"
// 2. Format code using an external command:
// "formatter": {
// "external": {
// "command": "prettier",
// "arguments": ["--stdin-filepath", "{buffer_path}"]
// }
// }
"formatter": "language_server",
// How to soft-wrap long lines of text. This setting can take
// three values:
//
// 1. Do not soft wrap.
// "soft_wrap": "none",
// 2. Soft wrap lines that overflow the editor:
// "soft_wrap": "editor_width",
// 3. Soft wrap lines at the preferred line length
// "soft_wrap": "preferred_line_length",
"soft_wrap": "none",
// The column at which to soft-wrap lines, for buffers where soft-wrap
// is enabled.
"preferred_line_length": 80,
// Whether to indent lines using tab characters, as opposed to multiple
// spaces.
"hard_tabs": false,
// How many columns a tab should occupy.
"tab_size": 4,
// Control what info is collected by Zed.
"telemetry": {
// Send debug info like crash reports.
"diagnostics": true,
// Send anonymized usage data like what languages you're using Zed with.
"metrics": true
},
// Automatically update Zed
"auto_update": true,
// Git gutter behavior configuration.
"git": {
// Control whether the git gutter is shown. May take 2 values:
// 1. Show the gutter
// "git_gutter": "tracked_files"
// 2. Hide the gutter
// "git_gutter": "hide"
"git_gutter": "tracked_files"
},
"copilot": {
// The set of glob patterns for which copilot should be disabled
// in any matching file.
"disabled_globs": [
".env"
]
},
// Settings specific to journaling
"journal": {
// The path of the directory where journal entries are stored
"path": "~",
// What format to display the hours in
// May take 2 values:
// 1. hour12
// 2. hour24
"hour_format": "hour12"
},
// Settings specific to the terminal
"terminal": {
// What shell to use when opening a terminal. May take 3 values:
// 1. Use the system's default terminal configuration in /etc/passwd
// "shell": "system"
// 2. A program:
// "shell": {
// "program": "sh"
// }
// 3. A program with arguments:
// "shell": {
// "with_arguments": {
// "program": "/bin/bash",
// "arguments": ["--login"]
// }
// }
"shell": "system",
// Where to dock terminals panel. Can be 'left', 'right', 'bottom'.
"dock": "bottom",
// Default width when the terminal is docked to the left or right.
"default_width": 640,
// Default height when the terminal is docked to the bottom.
"default_height": 320,
// What working directory to use when launching the terminal.
// May take 4 values:
// 1. Use the current file's project directory. Will Fallback to the
// first project directory strategy if unsuccessful
// "working_directory": "current_project_directory"
// 2. Use the first project in this workspace's directory
// "working_directory": "first_project_directory"
// 3. Always use this platform's home directory (if we can find it)
// "working_directory": "always_home"
// 4. Always use a specific directory. This value will be shell expanded.
// If this path is not a valid directory the terminal will default to
// this platform's home directory (if we can find it)
// "working_directory": {
// "always": {
// "directory": "~/zed/projects/"
// }
// }
"working_directory": "current_project_directory",
// Set the cursor blinking behavior in the terminal.
// May take 4 values:
// 1. Never blink the cursor, ignoring the terminal mode
// "blinking": "off",
// 2. Default the cursor blink to off, but allow the terminal to
// set blinking
// "blinking": "terminal_controlled",
// 3. Always blink the cursor, ignoring the terminal mode
// "blinking": "on",
"blinking": "terminal_controlled",
// Set whether Alternate Scroll mode (code: ?1007) is active by default.
// Alternate Scroll mode converts mouse scroll events into up / down key
// presses when in the alternate screen (e.g. when running applications
// like vim or less). The terminal can still set and unset this mode.
// May take 2 values:
// 1. Default alternate scroll mode to on
// "alternate_scroll": "on",
// 2. Default alternate scroll mode to off
// "alternate_scroll": "off",
"alternate_scroll": "off",
// Set whether the option key behaves as the meta key.
// May take 2 values:
// 1. Rely on default platform handling of option key, on macOS
// this means generating certain unicode characters
// "option_to_meta": false,
// 2. Make the option keys behave as a 'meta' key, e.g. for emacs
// "option_to_meta": true,
"option_as_meta": false,
// Whether or not selecting text in the terminal will automatically
// copy to the system clipboard.
"copy_on_select": false,
// Any key-value pairs added to this list will be added to the terminal's
// environment. Use `:` to separate multiple values.
"env": {
// "KEY": "value1:value2"
},
// Set the terminal's line height.
// May take 3 values:
// 1. Use a line height that's comfortable for reading, 1.618
// "line_height": "comfortable"
// 2. Use a standard line height, 1.3. This option is useful for TUIs,
// particularly if they use box characters
// "line_height": "standard",
// 3. Use a custom line height.
// "line_height": {
// "custom": 2
// },
"line_height": "comfortable",
// Activate the python virtual environment, if one is found, in the
// terminal's working directory (as resolved by the working_directory
// setting). Set this to "off" to disable this behavior.
"detect_venv": {
"on": {
// Default directories to search for virtual environments, relative
// to the current working directory. We recommend overriding this
// in your project's settings, rather than globally.
"directories": [
".env",
"env",
".venv",
"venv"
],
// Can also be 'csh' and 'fish'
"activate_script": "default"
}
}
// Set the terminal's font size. If this option is not included,
// the terminal will default to matching the buffer's font size.
// "font_size": "15",
// Set the terminal's font family. If this option is not included,
// the terminal will default to matching the buffer's font family.
// "font_family": "Zed Mono",
// ---
},
// Difference settings for semantic_index
"semantic_index": {
"enabled": false,
"reindexing_delay_seconds": 600
},
// Different settings for specific languages.
"languages": {
"Plain Text": {
"soft_wrap": "preferred_line_length"
},
"Elixir": {
"tab_size": 2
},
"Go": {
"tab_size": 4,
"hard_tabs": true
},
"Markdown": {
"soft_wrap": "preferred_line_length"
},
"JavaScript": {
"tab_size": 2
},
"TypeScript": {
"tab_size": 2
},
"TSX": {
"tab_size": 2
},
"YAML": {
"tab_size": 2
},
"JSON": {
"tab_size": 2
}
},
// LSP Specific settings.
"lsp": {
// Specify the LSP name as a key here.
// "rust-analyzer": {
// //These initialization options are merged into Zed's defaults
// "initialization_options": {
// "checkOnSave": {
// "command": "clippy"
// }
// }
// }
}
}