44 lines · 1.9 KB · Text
RawDownload
I2C device driver binding control from user-space================================================= Up to kernel 2.6.32, many i2c drivers used helper macros provided by<linux/i2c.h> which created standard module parameters to let the usercontrol how the driver would probe i2c buses and attach to devices. Theseparameters were known as "probe" (to let the driver probe for an extraaddress), "force" (to forcibly attach the driver to a given device) and"ignore" (to prevent a driver from probing a given address). With the conversion of the i2c subsystem to the standard device driverbinding model, it became clear that these per-module parameters were nolonger needed, and that a centralized implementation was possible. The new,sysfs-based interface is described in the documentation file"instantiating-devices", section "Method 4: Instantiate from user-space". Below is a mapping from the old module parameters to the new interface. Attaching a driver to an I2C device----------------------------------- Old method (module parameters):# modprobe <driver> probe=1,0x2d# modprobe <driver> force=1,0x2d# modprobe <driver> force_<device>=1,0x2d New method (sysfs interface):# echo <device> 0x2d > /sys/bus/i2c/devices/i2c-1/new_device Preventing a driver from attaching to an I2C device--------------------------------------------------- Old method (module parameters):# modprobe <driver> ignore=1,0x2f New method (sysfs interface):# echo dummy 0x2f > /sys/bus/i2c/devices/i2c-1/new_device# modprobe <driver> Of course, it is important to instantiate the "dummy" device before loadingthe driver. The dummy device will be handled by i2c-core itself, preventingother drivers from binding to it later on. If there is a real device at theproblematic address, and you want another driver to bind to it, then simplypass the name of the device in question instead of "dummy".

Keyboard shortcuts

General

Show keyboard shortcuts
?
Focus the current search
/

Issues and pull requests

Open filters
f

Issues, pull requests and Inbox

Select next item
j↓
Select previous item
k↑
Open selected item
Enter
Dismiss filters or clear selection
Esc

Repository code

Go to file
t