150 lines · 5.3 KB · Text
RawDownload
## For a description of the syntax of this configuration file,# see Documentation/kbuild/kconfig-language.txt.# menu "Firmware Drivers" config EDD	tristate "BIOS Enhanced Disk Drive calls determine boot disk"	depends on X86	help	  Say Y or M here if you want to enable BIOS Enhanced Disk Drive	  Services real mode BIOS calls to determine which disk	  BIOS tries boot from.  This information is then exported via sysfs. 	  This option is experimental and is known to fail to boot on some          obscure configurations. Most disk controller BIOS vendors do          not yet implement this feature. config EDD_OFF	bool "Sets default behavior for EDD detection to off"	depends on EDD	default n	help	  Say Y if you want EDD disabled by default, even though it is compiled into the	  kernel. Say N if you want EDD enabled by default. EDD can be dynamically set	  using the kernel parameter 'edd={on|skipmbr|off}'. config FIRMWARE_MEMMAP    bool "Add firmware-provided memory map to sysfs" if EXPERT    default X86    help      Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap.      That memory map is used for example by kexec to set up parameter area      for the next kernel, but can also be used for debugging purposes.       See also Documentation/ABI/testing/sysfs-firmware-memmap. config EFI_VARS	tristate "EFI Variable Support via sysfs"	depends on EFI	default n	help	  If you say Y here, you are able to get EFI (Extensible Firmware	  Interface) variable information via sysfs.  You may read,	  write, create, and destroy EFI variables through this interface. 	  Note that using this driver in concert with efibootmgr requires	  at least test release version 0.5.0-test3 or later, which is	  available from Matt Domsch's website located at:	  <http://linux.dell.com/efibootmgr/testing/efibootmgr-0.5.0-test3.tar.gz> 	  Subsequent efibootmgr releases may be found at:	  <http://linux.dell.com/efibootmgr> config EFI_PCDP	bool "Console device selection via EFI PCDP or HCDP table"	depends on ACPI && EFI && IA64	default y if IA64	help	  If your firmware supplies the PCDP table, and you want to	  automatically use the primary console device it describes	  as the Linux console, say Y here. 	  If your firmware supplies the HCDP table, and you want to	  use the first serial port it describes as the Linux console,	  say Y here.  If your EFI ConOut path contains only a UART	  device, it will become the console automatically.  Otherwise,	  you must specify the "console=hcdp" kernel boot argument. 	  Neither the PCDP nor the HCDP affects naming of serial devices,	  so a serial console may be /dev/ttyS0, /dev/ttyS1, etc, depending	  on how the driver discovers devices. 	  You must also enable the appropriate drivers (serial, VGA, etc.) 	  See DIG64_HCDPv20_042804.pdf available from	  <http://www.dig64.org/specifications/>  config DELL_RBU	tristate "BIOS update support for DELL systems via sysfs"	depends on X86	select FW_LOADER	help	 Say m if you want to have the option of updating the BIOS for your	 DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)	 supporting application to communicate with the BIOS regarding the new	 image for the image update to take effect.	 See <file:Documentation/dell_rbu.txt> for more details on the driver. config DCDBAS	tristate "Dell Systems Management Base Driver"	depends on X86	help	  The Dell Systems Management Base Driver provides a sysfs interface	  for systems management software to perform System Management	  Interrupts (SMIs) and Host Control Actions (system power cycle or	  power off after OS shutdown) on certain Dell systems. 	  See <file:Documentation/dcdbas.txt> for more details on the driver	  and the Dell systems on which Dell systems management software makes	  use of this driver. 	  Say Y or M here to enable the driver for use by Dell systems	  management software such as Dell OpenManage. config DMIID    bool "Export DMI identification via sysfs to userspace"    depends on DMI    default y	help	  Say Y here if you want to query SMBIOS/DMI system identification	  information from userspace through /sys/class/dmi/id/ or if you want	  DMI-based module auto-loading. config DMI_SYSFS	tristate "DMI table support in sysfs"	depends on SYSFS && DMI	default n	help	  Say Y or M here to enable the exporting of the raw DMI table	  data via sysfs.  This is useful for consuming the data without	  requiring any access to /dev/mem at all.  Tables are found	  under /sys/firmware/dmi when this option is enabled and	  loaded. config ISCSI_IBFT_FIND	bool "iSCSI Boot Firmware Table Attributes"	depends on X86	default n	help	  This option enables the kernel to find the region of memory	  in which the ISCSI Boot Firmware Table (iBFT) resides. This	  is necessary for iSCSI Boot Firmware Table Attributes module to work	  properly. config ISCSI_IBFT	tristate "iSCSI Boot Firmware Table Attributes module"	select ISCSI_BOOT_SYSFS	depends on ISCSI_IBFT_FIND && SCSI && SCSI_LOWLEVEL	default	n	help	  This option enables support for detection and exposing of iSCSI	  Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to	  detect iSCSI boot parameters dynamically during system boot, say Y.	  Otherwise, say N. source "drivers/firmware/google/Kconfig" endmenu

Keyboard shortcuts

General

Show keyboard shortcuts
?
Focus the current search
/

Issues and pull requests

Open filters
f

Issues, pull requests and Inbox

Select next item
j↓
Select previous item
k↑
Open selected item
Enter
Dismiss filters or clear selection
Esc

Repository code

Go to file
t