669 lines · 18.1 KB · C
RawDownload
/* tmp401.c * * Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com> * Preliminary tmp411 support by: * Gabriel Konat, Sander Leget, Wouter Willems * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* * Driver for the Texas Instruments TMP401 SMBUS temperature sensor IC. * * Note this IC is in some aspect similar to the LM90, but it has quite a * few differences too, for example the local temp has a higher resolution * and thus has 16 bits registers for its value and limit instead of 8 bits. */ #include <linux/module.h>#include <linux/init.h>#include <linux/slab.h>#include <linux/jiffies.h>#include <linux/i2c.h>#include <linux/hwmon.h>#include <linux/hwmon-sysfs.h>#include <linux/err.h>#include <linux/mutex.h>#include <linux/sysfs.h> /* Addresses to scan */static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END }; enum chips { tmp401, tmp411 }; /* * The TMP401 registers, note some registers have different addresses for * reading and writing */#define TMP401_STATUS				0x02#define TMP401_CONFIG_READ			0x03#define TMP401_CONFIG_WRITE			0x09#define TMP401_CONVERSION_RATE_READ		0x04#define TMP401_CONVERSION_RATE_WRITE		0x0A#define TMP401_TEMP_CRIT_HYST			0x21#define TMP401_CONSECUTIVE_ALERT		0x22#define TMP401_MANUFACTURER_ID_REG		0xFE#define TMP401_DEVICE_ID_REG			0xFF#define TMP411_N_FACTOR_REG			0x18 static const u8 TMP401_TEMP_MSB[2]			= { 0x00, 0x01 };static const u8 TMP401_TEMP_LSB[2]			= { 0x15, 0x10 };static const u8 TMP401_TEMP_LOW_LIMIT_MSB_READ[2]	= { 0x06, 0x08 };static const u8 TMP401_TEMP_LOW_LIMIT_MSB_WRITE[2]	= { 0x0C, 0x0E };static const u8 TMP401_TEMP_LOW_LIMIT_LSB[2]		= { 0x17, 0x14 };static const u8 TMP401_TEMP_HIGH_LIMIT_MSB_READ[2]	= { 0x05, 0x07 };static const u8 TMP401_TEMP_HIGH_LIMIT_MSB_WRITE[2]	= { 0x0B, 0x0D };static const u8 TMP401_TEMP_HIGH_LIMIT_LSB[2]		= { 0x16, 0x13 };/* These are called the THERM limit / hysteresis / mask in the datasheet */static const u8 TMP401_TEMP_CRIT_LIMIT[2]		= { 0x20, 0x19 }; static const u8 TMP411_TEMP_LOWEST_MSB[2]		= { 0x30, 0x34 };static const u8 TMP411_TEMP_LOWEST_LSB[2]		= { 0x31, 0x35 };static const u8 TMP411_TEMP_HIGHEST_MSB[2]		= { 0x32, 0x36 };static const u8 TMP411_TEMP_HIGHEST_LSB[2]		= { 0x33, 0x37 }; /* Flags */#define TMP401_CONFIG_RANGE		0x04#define TMP401_CONFIG_SHUTDOWN		0x40#define TMP401_STATUS_LOCAL_CRIT		0x01#define TMP401_STATUS_REMOTE_CRIT		0x02#define TMP401_STATUS_REMOTE_OPEN		0x04#define TMP401_STATUS_REMOTE_LOW		0x08#define TMP401_STATUS_REMOTE_HIGH		0x10#define TMP401_STATUS_LOCAL_LOW		0x20#define TMP401_STATUS_LOCAL_HIGH		0x40 /* Manufacturer / Device ID's */#define TMP401_MANUFACTURER_ID			0x55#define TMP401_DEVICE_ID			0x11#define TMP411_DEVICE_ID			0x12 /* * Driver data (common to all clients) */ static const struct i2c_device_id tmp401_id[] = {	{ "tmp401", tmp401 },	{ "tmp411", tmp411 },	{ }};MODULE_DEVICE_TABLE(i2c, tmp401_id); /* * Client data (each client gets its own) */ struct tmp401_data {	struct device *hwmon_dev;	struct mutex update_lock;	char valid; /* zero until following fields are valid */	unsigned long last_updated; /* in jiffies */	enum chips kind; 	/* register values */	u8 status;	u8 config;	u16 temp[2];	u16 temp_low[2];	u16 temp_high[2];	u8 temp_crit[2];	u8 temp_crit_hyst;	u16 temp_lowest[2];	u16 temp_highest[2];}; /* * Sysfs attr show / store functions */ static int tmp401_register_to_temp(u16 reg, u8 config){	int temp = reg; 	if (config & TMP401_CONFIG_RANGE)		temp -= 64 * 256; 	return (temp * 625 + 80) / 160;} static u16 tmp401_temp_to_register(long temp, u8 config){	if (config & TMP401_CONFIG_RANGE) {		temp = SENSORS_LIMIT(temp, -64000, 191000);		temp += 64000;	} else		temp = SENSORS_LIMIT(temp, 0, 127000); 	return (temp * 160 + 312) / 625;} static int tmp401_crit_register_to_temp(u8 reg, u8 config){	int temp = reg; 	if (config & TMP401_CONFIG_RANGE)		temp -= 64; 	return temp * 1000;} static u8 tmp401_crit_temp_to_register(long temp, u8 config){	if (config & TMP401_CONFIG_RANGE) {		temp = SENSORS_LIMIT(temp, -64000, 191000);		temp += 64000;	} else		temp = SENSORS_LIMIT(temp, 0, 127000); 	return (temp + 500) / 1000;} static struct tmp401_data *tmp401_update_device_reg16(	struct i2c_client *client, struct tmp401_data *data){	int i; 	for (i = 0; i < 2; i++) {		/*		 * High byte must be read first immediately followed		 * by the low byte		 */		data->temp[i] = i2c_smbus_read_byte_data(client,			TMP401_TEMP_MSB[i]) << 8;		data->temp[i] |= i2c_smbus_read_byte_data(client,			TMP401_TEMP_LSB[i]);		data->temp_low[i] = i2c_smbus_read_byte_data(client,			TMP401_TEMP_LOW_LIMIT_MSB_READ[i]) << 8;		data->temp_low[i] |= i2c_smbus_read_byte_data(client,			TMP401_TEMP_LOW_LIMIT_LSB[i]);		data->temp_high[i] = i2c_smbus_read_byte_data(client,			TMP401_TEMP_HIGH_LIMIT_MSB_READ[i]) << 8;		data->temp_high[i] |= i2c_smbus_read_byte_data(client,			TMP401_TEMP_HIGH_LIMIT_LSB[i]);		data->temp_crit[i] = i2c_smbus_read_byte_data(client,			TMP401_TEMP_CRIT_LIMIT[i]); 		if (data->kind == tmp411) {			data->temp_lowest[i] = i2c_smbus_read_byte_data(client,				TMP411_TEMP_LOWEST_MSB[i]) << 8;			data->temp_lowest[i] |= i2c_smbus_read_byte_data(				client, TMP411_TEMP_LOWEST_LSB[i]); 			data->temp_highest[i] = i2c_smbus_read_byte_data(				client, TMP411_TEMP_HIGHEST_MSB[i]) << 8;			data->temp_highest[i] |= i2c_smbus_read_byte_data(				client, TMP411_TEMP_HIGHEST_LSB[i]);		}	}	return data;} static struct tmp401_data *tmp401_update_device(struct device *dev){	struct i2c_client *client = to_i2c_client(dev);	struct tmp401_data *data = i2c_get_clientdata(client); 	mutex_lock(&data->update_lock); 	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {		data->status = i2c_smbus_read_byte_data(client, TMP401_STATUS);		data->config = i2c_smbus_read_byte_data(client,						TMP401_CONFIG_READ);		tmp401_update_device_reg16(client, data); 		data->temp_crit_hyst = i2c_smbus_read_byte_data(client,						TMP401_TEMP_CRIT_HYST); 		data->last_updated = jiffies;		data->valid = 1;	} 	mutex_unlock(&data->update_lock); 	return data;} static ssize_t show_temp_value(struct device *dev,	struct device_attribute *devattr, char *buf){	int index = to_sensor_dev_attr(devattr)->index;	struct tmp401_data *data = tmp401_update_device(dev); 	return sprintf(buf, "%d\n",		tmp401_register_to_temp(data->temp[index], data->config));} static ssize_t show_temp_min(struct device *dev,	struct device_attribute *devattr, char *buf){	int index = to_sensor_dev_attr(devattr)->index;	struct tmp401_data *data = tmp401_update_device(dev); 	return sprintf(buf, "%d\n",		tmp401_register_to_temp(data->temp_low[index], data->config));} static ssize_t show_temp_max(struct device *dev,	struct device_attribute *devattr, char *buf){	int index = to_sensor_dev_attr(devattr)->index;	struct tmp401_data *data = tmp401_update_device(dev); 	return sprintf(buf, "%d\n",		tmp401_register_to_temp(data->temp_high[index], data->config));} static ssize_t show_temp_crit(struct device *dev,	struct device_attribute *devattr, char *buf){	int index = to_sensor_dev_attr(devattr)->index;	struct tmp401_data *data = tmp401_update_device(dev); 	return sprintf(buf, "%d\n",			tmp401_crit_register_to_temp(data->temp_crit[index],							data->config));} static ssize_t show_temp_crit_hyst(struct device *dev,	struct device_attribute *devattr, char *buf){	int temp, index = to_sensor_dev_attr(devattr)->index;	struct tmp401_data *data = tmp401_update_device(dev); 	mutex_lock(&data->update_lock);	temp = tmp401_crit_register_to_temp(data->temp_crit[index],						data->config);	temp -= data->temp_crit_hyst * 1000;	mutex_unlock(&data->update_lock); 	return sprintf(buf, "%d\n", temp);} static ssize_t show_temp_lowest(struct device *dev,	struct device_attribute *devattr, char *buf){	int index = to_sensor_dev_attr(devattr)->index;	struct tmp401_data *data = tmp401_update_device(dev); 	return sprintf(buf, "%d\n",		tmp401_register_to_temp(data->temp_lowest[index],					data->config));} static ssize_t show_temp_highest(struct device *dev,	struct device_attribute *devattr, char *buf){	int index = to_sensor_dev_attr(devattr)->index;	struct tmp401_data *data = tmp401_update_device(dev); 	return sprintf(buf, "%d\n",		tmp401_register_to_temp(data->temp_highest[index],					data->config));} static ssize_t show_status(struct device *dev,	struct device_attribute *devattr, char *buf){	int mask = to_sensor_dev_attr(devattr)->index;	struct tmp401_data *data = tmp401_update_device(dev); 	if (data->status & mask)		return sprintf(buf, "1\n");	else		return sprintf(buf, "0\n");} static ssize_t store_temp_min(struct device *dev, struct device_attribute	*devattr, const char *buf, size_t count){	int index = to_sensor_dev_attr(devattr)->index;	struct tmp401_data *data = tmp401_update_device(dev);	long val;	u16 reg; 	if (kstrtol(buf, 10, &val))		return -EINVAL; 	reg = tmp401_temp_to_register(val, data->config); 	mutex_lock(&data->update_lock); 	i2c_smbus_write_byte_data(to_i2c_client(dev),		TMP401_TEMP_LOW_LIMIT_MSB_WRITE[index], reg >> 8);	i2c_smbus_write_byte_data(to_i2c_client(dev),		TMP401_TEMP_LOW_LIMIT_LSB[index], reg & 0xFF); 	data->temp_low[index] = reg; 	mutex_unlock(&data->update_lock); 	return count;} static ssize_t store_temp_max(struct device *dev, struct device_attribute	*devattr, const char *buf, size_t count){	int index = to_sensor_dev_attr(devattr)->index;	struct tmp401_data *data = tmp401_update_device(dev);	long val;	u16 reg; 	if (kstrtol(buf, 10, &val))		return -EINVAL; 	reg = tmp401_temp_to_register(val, data->config); 	mutex_lock(&data->update_lock); 	i2c_smbus_write_byte_data(to_i2c_client(dev),		TMP401_TEMP_HIGH_LIMIT_MSB_WRITE[index], reg >> 8);	i2c_smbus_write_byte_data(to_i2c_client(dev),		TMP401_TEMP_HIGH_LIMIT_LSB[index], reg & 0xFF); 	data->temp_high[index] = reg; 	mutex_unlock(&data->update_lock); 	return count;} static ssize_t store_temp_crit(struct device *dev, struct device_attribute	*devattr, const char *buf, size_t count){	int index = to_sensor_dev_attr(devattr)->index;	struct tmp401_data *data = tmp401_update_device(dev);	long val;	u8 reg; 	if (kstrtol(buf, 10, &val))		return -EINVAL; 	reg = tmp401_crit_temp_to_register(val, data->config); 	mutex_lock(&data->update_lock); 	i2c_smbus_write_byte_data(to_i2c_client(dev),		TMP401_TEMP_CRIT_LIMIT[index], reg); 	data->temp_crit[index] = reg; 	mutex_unlock(&data->update_lock); 	return count;} static ssize_t store_temp_crit_hyst(struct device *dev, struct device_attribute	*devattr, const char *buf, size_t count){	int temp, index = to_sensor_dev_attr(devattr)->index;	struct tmp401_data *data = tmp401_update_device(dev);	long val;	u8 reg; 	if (kstrtol(buf, 10, &val))		return -EINVAL; 	if (data->config & TMP401_CONFIG_RANGE)		val = SENSORS_LIMIT(val, -64000, 191000);	else		val = SENSORS_LIMIT(val, 0, 127000); 	mutex_lock(&data->update_lock);	temp = tmp401_crit_register_to_temp(data->temp_crit[index],						data->config);	val = SENSORS_LIMIT(val, temp - 255000, temp);	reg = ((temp - val) + 500) / 1000; 	i2c_smbus_write_byte_data(to_i2c_client(dev),		TMP401_TEMP_CRIT_HYST, reg); 	data->temp_crit_hyst = reg; 	mutex_unlock(&data->update_lock); 	return count;} /* * Resets the historical measurements of minimum and maximum temperatures. * This is done by writing any value to any of the minimum/maximum registers * (0x30-0x37). */static ssize_t reset_temp_history(struct device *dev,	struct device_attribute	*devattr, const char *buf, size_t count){	long val; 	if (kstrtol(buf, 10, &val))		return -EINVAL; 	if (val != 1) {		dev_err(dev, "temp_reset_history value %ld not"			" supported. Use 1 to reset the history!\n", val);		return -EINVAL;	}	i2c_smbus_write_byte_data(to_i2c_client(dev),		TMP411_TEMP_LOWEST_MSB[0], val); 	return count;} static struct sensor_device_attribute tmp401_attr[] = {	SENSOR_ATTR(temp1_input, S_IRUGO, show_temp_value, NULL, 0),	SENSOR_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,		    store_temp_min, 0),	SENSOR_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,		    store_temp_max, 0),	SENSOR_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_crit,		    store_temp_crit, 0),	SENSOR_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_crit_hyst,		    store_temp_crit_hyst, 0),	SENSOR_ATTR(temp1_min_alarm, S_IRUGO, show_status, NULL,		    TMP401_STATUS_LOCAL_LOW),	SENSOR_ATTR(temp1_max_alarm, S_IRUGO, show_status, NULL,		    TMP401_STATUS_LOCAL_HIGH),	SENSOR_ATTR(temp1_crit_alarm, S_IRUGO, show_status, NULL,		    TMP401_STATUS_LOCAL_CRIT),	SENSOR_ATTR(temp2_input, S_IRUGO, show_temp_value, NULL, 1),	SENSOR_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min,		    store_temp_min, 1),	SENSOR_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,		    store_temp_max, 1),	SENSOR_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit,		    store_temp_crit, 1),	SENSOR_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, 1),	SENSOR_ATTR(temp2_fault, S_IRUGO, show_status, NULL,		    TMP401_STATUS_REMOTE_OPEN),	SENSOR_ATTR(temp2_min_alarm, S_IRUGO, show_status, NULL,		    TMP401_STATUS_REMOTE_LOW),	SENSOR_ATTR(temp2_max_alarm, S_IRUGO, show_status, NULL,		    TMP401_STATUS_REMOTE_HIGH),	SENSOR_ATTR(temp2_crit_alarm, S_IRUGO, show_status, NULL,		    TMP401_STATUS_REMOTE_CRIT),}; /* * Additional features of the TMP411 chip. * The TMP411 stores the minimum and maximum

Lines 1–500 of 669.

Keyboard shortcuts

General

Show keyboard shortcuts
?
Focus the current search
/

Issues and pull requests

Open filters
f

Issues, pull requests and Inbox

Select next item
j↓
Select previous item
k↑
Open selected item
Enter
Dismiss filters or clear selection
Esc

Repository code

Go to file
t