#!/bin/bash# SPDX-License-Identifier: GPL-2.0 # Kselftest framework requirement - SKIP code is 4.ksft_skip=4 ALL_TESTS="loopback_test"NUM_NETIFS=2source tc_common.shsource lib.sh h1_create(){ simple_if_init $h1 192.0.2.1/24 tc qdisc add dev $h1 clsact} h1_destroy(){ tc qdisc del dev $h1 clsact simple_if_fini $h1 192.0.2.1/24} h2_create(){ simple_if_init $h2} h2_destroy(){ simple_if_fini $h2} loopback_test(){ RET=0 tc filter add dev $h1 ingress protocol arp pref 1 handle 101 flower \ skip_hw arp_op reply arp_tip 192.0.2.1 action drop $MZ $h1 -c 1 -t arp -q tc_check_packets "dev $h1 ingress" 101 1 check_fail $? "Matched on a filter without loopback setup" ethtool -K $h1 loopback on check_err $? "Failed to enable loopback" setup_wait_dev $h1 $MZ $h1 -c 1 -t arp -q tc_check_packets "dev $h1 ingress" 101 1 check_err $? "Did not match on filter with loopback" ethtool -K $h1 loopback off check_err $? "Failed to disable loopback" $MZ $h1 -c 1 -t arp -q tc_check_packets "dev $h1 ingress" 101 2 check_fail $? "Matched on a filter after loopback was removed" tc filter del dev $h1 ingress protocol arp pref 1 handle 101 flower log_test "loopback"} setup_prepare(){ h1=${NETIFS[p1]} h2=${NETIFS[p2]} vrf_prepare h1_create h2_create if ethtool -k $h1 | grep loopback | grep -q fixed; then log_test "SKIP: dev $h1 does not support loopback feature" exit $ksft_skip fi} cleanup(){ pre_cleanup h2_destroy h1_destroy vrf_cleanup} trap cleanup EXIT setup_preparesetup_wait tests_run exit $EXIT_STATUS
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
ALL_TESTS="loopback_test"
NUM_NETIFS=2
source tc_common.sh
source lib.sh
h1_create()
{
simple_if_init $h1 192.0.2.1/24
tc qdisc add dev $h1 clsact
}
h1_destroy()
{
tc qdisc del dev $h1 clsact
simple_if_fini $h1 192.0.2.1/24
}
h2_create()
{
simple_if_init $h2
}
h2_destroy()
{
simple_if_fini $h2
}
loopback_test()
{
RET=0
tc filter add dev $h1 ingress protocol arp pref 1 handle 101 flower \
skip_hw arp_op reply arp_tip 192.0.2.1 action drop
$MZ $h1 -c 1 -t arp -q
tc_check_packets "dev $h1 ingress" 101 1
check_fail $? "Matched on a filter without loopback setup"
ethtool -K $h1 loopback on
check_err $? "Failed to enable loopback"
setup_wait_dev $h1
$MZ $h1 -c 1 -t arp -q
tc_check_packets "dev $h1 ingress" 101 1
check_err $? "Did not match on filter with loopback"
ethtool -K $h1 loopback off
check_err $? "Failed to disable loopback"
$MZ $h1 -c 1 -t arp -q
tc_check_packets "dev $h1 ingress" 101 2
check_fail $? "Matched on a filter after loopback was removed"
tc filter del dev $h1 ingress protocol arp pref 1 handle 101 flower
log_test "loopback"
}
setup_prepare()
{
h1=${NETIFS[p1]}
h2=${NETIFS[p2]}
vrf_prepare
h1_create
h2_create
if ethtool -k $h1 | grep loopback | grep -q fixed; then
log_test "SKIP: dev $h1 does not support loopback feature"
exit $ksft_skip
fi
}
cleanup()
{
pre_cleanup
h2_destroy
h1_destroy
vrf_cleanup
}
trap cleanup EXIT
setup_prepare
setup_wait
tests_run
exit $EXIT_STATUS