#ifndef _RRUNNER_H_#define _RRUNNER_H_ #include <linux/config.h>#include <linux/interrupt.h> #if ((BITS_PER_LONG != 32) && (BITS_PER_LONG != 64))#error "BITS_PER_LONG not defined or not valid"#endif struct rr_regs { u32 pad0[16]; u32 HostCtrl; u32 LocalCtrl; u32 Pc; u32 BrkPt; /* Timer increments every 0.97 micro-seconds (unsigned int) */ u32 Timer_Hi; u32 Timer; u32 TimerRef; u32 PciState; u32 Event; u32 MbEvent; u32 WinBase; u32 WinData; u32 RX_state; u32 TX_state; u32 Overhead; u32 ExtIo; u32 DmaWriteHostHi; u32 DmaWriteHostLo; u32 pad1[2]; u32 DmaReadHostHi; u32 DmaReadHostLo; u32 pad2; u32 DmaReadLen; u32 DmaWriteState; u32 DmaWriteLcl; u32 DmaWriteIPchecksum; u32 DmaWriteLen; u32 DmaReadState; u32 DmaReadLcl; u32 DmaReadIPchecksum; u32 pad3; u32 RxBase; u32 RxPrd; u32 RxCon; u32 pad4; u32 TxBase; u32 TxPrd; u32 TxCon; u32 pad5; u32 RxIndPro; u32 RxIndCon; u32 RxIndRef; u32 pad6; u32 TxIndPro; u32 TxIndCon; u32 TxIndRef; u32 pad7[17]; u32 DrCmndPro; u32 DrCmndCon; u32 DrCmndRef; u32 pad8; u32 DwCmndPro; u32 DwCmndCon; u32 DwCmndRef; u32 AssistState; u32 DrDataPro; u32 DrDataCon; u32 DrDataRef; u32 pad9; u32 DwDataPro; u32 DwDataCon; u32 DwDataRef; u32 pad10[33]; u32 EvtCon; u32 pad11[5]; u32 TxPi; u32 IpRxPi; u32 pad11a[8]; u32 CmdRing[16]; /* The ULA is in two registers the high order two bytes of the first * word contain the RunCode features. * ula0 res res byte0 byte1 * ula1 byte2 byte3 byte4 byte5 */ u32 Ula0; u32 Ula1; u32 RxRingHi; u32 RxRingLo; u32 InfoPtrHi; u32 InfoPtrLo; u32 Mode; u32 ConRetry; u32 ConRetryTmr; u32 ConTmout; u32 CtatTmr; u32 MaxRxRng; u32 IntrTmr; u32 TxDataMvTimeout; u32 RxDataMvTimeout; u32 EvtPrd; u32 TraceIdx; u32 Fail1; u32 Fail2; u32 DrvPrm; u32 FilterLA; u32 FwRev; u32 FwRes1; u32 FwRes2; u32 FwRes3; u32 WriteDmaThresh; u32 ReadDmaThresh; u32 pad12[325]; u32 Window[512];}; /* * Host control register bits. */ #define RR_INT 0x01#define RR_CLEAR_INT 0x02#define NO_SWAP 0x04000004#define NO_SWAP1 0x00000004#define PCI_RESET_NIC 0x08#define HALT_NIC 0x10#define SSTEP_NIC 0x20#define MEM_READ_MULTI 0x40#define NIC_HALTED 0x100#define HALT_INST 0x200#define PARITY_ERR 0x400#define INVALID_INST_B 0x800#define RR_REV_2 0x20000000#define RR_REV_MASK 0xf0000000 /* * Local control register bits. */ #define INTA_STATE 0x01#define CLEAR_INTA 0x02#define FAST_EEPROM_ACCESS 0x08#define ENABLE_EXTRA_SRAM 0x100#define ENABLE_EXTRA_DESC 0x200#define ENABLE_PARITY 0x400#define FORCE_DMA_PARITY_ERROR 0x800#define ENABLE_EEPROM_WRITE 0x1000#define ENABLE_DATA_CACHE 0x2000#define SRAM_LO_PARITY_ERR 0x4000#define SRAM_HI_PARITY_ERR 0x8000 /* * PCI state bits. */ #define FORCE_PCI_RESET 0x01#define PROVIDE_LENGTH 0x02#define MASK_DMA_READ_MAX 0x1C#define RBURST_DISABLE 0x00#define RBURST_4 0x04#define RBURST_16 0x08#define RBURST_32 0x0C#define RBURST_64 0x10#define RBURST_128 0x14#define RBURST_256 0x18#define RBURST_1024 0x1C#define MASK_DMA_WRITE_MAX 0xE0#define WBURST_DISABLE 0x00#define WBURST_4 0x20#define WBURST_16 0x40#define WBURST_32 0x60#define WBURST_64 0x80#define WBURST_128 0xa0#define WBURST_256 0xc0#define WBURST_1024 0xe0#define MASK_MIN_DMA 0xFF00#define FIFO_RETRY_ENABLE 0x10000 /* * Event register */ #define DMA_WRITE_DONE 0x10000#define DMA_READ_DONE 0x20000#define DMA_WRITE_ERR 0x40000#define DMA_READ_ERR 0x80000 /* * Receive state * * RoadRunner HIPPI Receive State Register controls and monitors the * HIPPI receive interface in the NIC. Look at err bits when a HIPPI * receive Error Event occurs. */ #define ENABLE_NEW_CON 0x01#define RESET_RECV 0x02#define RECV_ALL 0x00#define RECV_1K 0x20#define RECV_2K 0x40#define RECV_4K 0x60#define RECV_8K 0x80#define RECV_16K 0xa0#define RECV_32K 0xc0#define RECV_64K 0xe0 /* * Transmit status. */ #define ENA_XMIT 0x01#define PERM_CON 0x02 /* * DMA write state */ #define RESET_DMA 0x01#define NO_SWAP_DMA 0x02#define DMA_ACTIVE 0x04#define THRESH_MASK 0x1F#define DMA_ERROR_MASK 0xff000000 /* * Gooddies stored in the ULA registers. */ #define TRACE_ON_WHAT_BIT 0x00020000 /* Traces on */#define ONEM_BUF_WHAT_BIT 0x00040000 /* 1Meg vs 256K */#define CHAR_API_WHAT_BIT 0x00080000 /* Char API vs network only */#define CMD_EVT_WHAT_BIT 0x00200000 /* Command event */#define LONG_TX_WHAT_BIT 0x00400000#define LONG_RX_WHAT_BIT 0x00800000#define WHAT_BIT_MASK 0xFFFD0000 /* Feature bit mask */ /* * Mode status */ #define EVENT_OVFL 0x80000000#define FATAL_ERR 0x40000000#define LOOP_BACK 0x01#define MODE_PH 0x02#define MODE_FP 0x00#define PTR64BIT 0x04#define PTR32BIT 0x00#define PTR_WD_SWAP 0x08#define PTR_WD_NOSWAP 0x00#define POST_WARN_EVENT 0x10#define ERR_TERM 0x20#define DIRECT_CONN 0x40#define NO_NIC_WATCHDOG 0x80#define SWAP_DATA 0x100#define SWAP_CONTROL 0x200#define NIC_HALT_ON_ERR 0x400#define NIC_NO_RESTART 0x800#define HALF_DUP_TX 0x1000#define HALF_DUP_RX 0x2000 /* * Error codes */ /* Host Error Codes - values of fail1 */#define ERR_UNKNOWN_MBOX 0x1001#define ERR_UNKNOWN_CMD 0x1002#define ERR_MAX_RING 0x1003#define ERR_RING_CLOSED 0x1004#define ERR_RING_OPEN 0x1005/* Firmware internal errors */#define ERR_EVENT_RING_FULL 0x01#define ERR_DW_PEND_CMND_FULL 0x02#define ERR_DR_PEND_CMND_FULL 0x03#define ERR_DW_PEND_DATA_FULL 0x04#define ERR_DR_PEND_DATA_FULL 0x05#define ERR_ILLEGAL_JUMP 0x06#define ERR_UNIMPLEMENTED 0x07#define ERR_TX_INFO_FULL 0x08#define ERR_RX_INFO_FULL 0x09#define ERR_ILLEGAL_MODE 0x0A#define ERR_MAIN_TIMEOUT 0x0B#define ERR_EVENT_BITS 0x0C#define ERR_UNPEND_FULL 0x0D#define ERR_TIMER_QUEUE_FULL 0x0E#define ERR_TIMER_QUEUE_EMPTY 0x0F#define ERR_TIMER_NO_FREE 0x10#define ERR_INTR_START 0x11#define ERR_BAD_STARTUP 0x12#define ERR_NO_PKT_END 0x13#define ERR_HALTED_ON_ERR 0x14/* Hardware NIC Errors */#define ERR_WRITE_DMA 0x0101#define ERR_READ_DMA 0x0102#define ERR_EXT_SERIAL 0x0103#define ERR_TX_INT_PARITY 0x0104 /* * Event definitions */ #define EVT_RING_ENTRIES 64#define EVT_RING_SIZE (EVT_RING_ENTRIES * sizeof(struct event)) struct event {#ifdef __LITTLE_ENDIAN u16 index; u8 ring; u8 code;#else u8 code; u8 ring; u16 index;#endif u32 timestamp;}; /* * General Events */ #define E_NIC_UP 0x01#define E_WATCHDOG 0x02 #define E_STAT_UPD 0x04#define E_INVAL_CMD 0x05#define E_SET_CMD_CONS 0x06#define E_LINK_ON 0x07#define E_LINK_OFF 0x08#define E_INTERN_ERR 0x09#define E_HOST_ERR 0x0A#define E_STATS_UPDATE 0x0B#define E_REJECTING 0x0C /* * Send Events */#define E_CON_REJ 0x13#define E_CON_TMOUT 0x14#define E_CON_NC_TMOUT 0x15 /* I , Connection No Campon Timeout */#define E_DISC_ERR 0x16#define E_INT_PRTY 0x17#define E_TX_IDLE 0x18#define E_TX_LINK_DROP 0x19#define E_TX_INV_RNG 0x1A#define E_TX_INV_BUF 0x1B#define E_TX_INV_DSC 0x1C /* * Destination Events *//* * General Receive events */#define E_VAL_RNG 0x20#define E_RX_RNG_ENER 0x21#define E_INV_RNG 0x22#define E_RX_RNG_SPC 0x23#define E_RX_RNG_OUT 0x24#define E_PKT_DISCARD 0x25#define E_INFO_EVT 0x27 /* * Data corrupted events */#define E_RX_PAR_ERR 0x2B#define E_RX_LLRC_ERR 0x2C#define E_IP_CKSM_ERR 0x2D#define E_DTA_CKSM_ERR 0x2E#define E_SHT_BST 0x2F /* * Data lost events */#define E_LST_LNK_ERR 0x30#define E_FLG_SYN_ERR 0x31#define E_FRM_ERR 0x32#define E_RX_IDLE 0x33#define E_PKT_LN_ERR 0x34#define E_STATE_ERR 0x35#define E_UNEXP_DATA 0x3C /* * Fatal events */#define E_RX_INV_BUF 0x36#define E_RX_INV_DSC 0x37#define E_RNG_BLK 0x38 /* * Warning events */#define E_RX_TO 0x39#define E_BFR_SPC 0x3A#define E_INV_ULP 0x3B #define E_NOT_IMPLEMENTED 0x40 /* * Commands */ #define CMD_RING_ENTRIES 16 struct cmd {#ifdef __LITTLE_ENDIAN u16 index; u8 ring; u8 code;#else u8 code; u8 ring; u16 index;#endif}; #define C_START_FW 0x01#define C_UPD_STAT 0x02#define C_WATCHDOG 0x05#define C_DEL_RNG 0x09#define C_NEW_RNG 0x0A#define C_CONN 0x0D /* * Mode bits */ #define PACKET_BAD 0x01 /* Packet had link-layer error */#define INTERRUPT 0x02#define TX_IP_CKSUM 0x04#define PACKET_END 0x08#define PACKET_START 0x10#define SAME_IFIELD 0x80 typedef struct {#if (BITS_PER_LONG == 64) u64 addrlo;#else u32 addrhi; u32 addrlo;#endif} rraddr; static inline void set_rraddr(rraddr *ra, dma_addr_t addr)Lines 1–500 of 848. Load more
#ifndef _RRUNNER_H_ #define _RRUNNER_H_ #include <linux/config.h> #include <linux/interrupt.h> #if ((BITS_PER_LONG != 32) && (BITS_PER_LONG != 64)) #error "BITS_PER_LONG not defined or not valid" #endif struct rr_regs { u32 pad0[16]; u32 HostCtrl; u32 LocalCtrl; u32 Pc; u32 BrkPt; /* Timer increments every 0.97 micro-seconds (unsigned int) */ u32 Timer_Hi; u32 Timer; u32 TimerRef; u32 PciState; u32 Event; u32 MbEvent; u32 WinBase; u32 WinData; u32 RX_state; u32 TX_state; u32 Overhead; u32 ExtIo; u32 DmaWriteHostHi; u32 DmaWriteHostLo; u32 pad1[2]; u32 DmaReadHostHi; u32 DmaReadHostLo; u32 pad2; u32 DmaReadLen; u32 DmaWriteState; u32 DmaWriteLcl; u32 DmaWriteIPchecksum; u32 DmaWriteLen; u32 DmaReadState; u32 DmaReadLcl; u32 DmaReadIPchecksum; u32 pad3; u32 RxBase; u32 RxPrd; u32 RxCon; u32 pad4; u32 TxBase; u32 TxPrd; u32 TxCon; u32 pad5; u32 RxIndPro; u32 RxIndCon; u32 RxIndRef; u32 pad6; u32 TxIndPro; u32 TxIndCon; u32 TxIndRef; u32 pad7[17]; u32 DrCmndPro; u32 DrCmndCon; u32 DrCmndRef; u32 pad8; u32 DwCmndPro; u32 DwCmndCon; u32 DwCmndRef; u32 AssistState; u32 DrDataPro; u32 DrDataCon; u32 DrDataRef; u32 pad9; u32 DwDataPro; u32 DwDataCon; u32 DwDataRef; u32 pad10[33]; u32 EvtCon; u32 pad11[5]; u32 TxPi; u32 IpRxPi; u32 pad11a[8]; u32 CmdRing[16]; /* The ULA is in two registers the high order two bytes of the first * word contain the RunCode features. * ula0 res res byte0 byte1 * ula1 byte2 byte3 byte4 byte5 */ u32 Ula0; u32 Ula1; u32 RxRingHi; u32 RxRingLo; u32 InfoPtrHi; u32 InfoPtrLo; u32 Mode; u32 ConRetry; u32 ConRetryTmr; u32 ConTmout; u32 CtatTmr; u32 MaxRxRng; u32 IntrTmr; u32 TxDataMvTimeout; u32 RxDataMvTimeout; u32 EvtPrd; u32 TraceIdx; u32 Fail1; u32 Fail2; u32 DrvPrm; u32 FilterLA; u32 FwRev; u32 FwRes1; u32 FwRes2; u32 FwRes3; u32 WriteDmaThresh; u32 ReadDmaThresh; u32 pad12[325]; u32 Window[512]; }; /* * Host control register bits. */ #define RR_INT 0x01 #define RR_CLEAR_INT 0x02 #define NO_SWAP 0x04000004 #define NO_SWAP1 0x00000004 #define PCI_RESET_NIC 0x08 #define HALT_NIC 0x10 #define SSTEP_NIC 0x20 #define MEM_READ_MULTI 0x40 #define NIC_HALTED 0x100 #define HALT_INST 0x200 #define PARITY_ERR 0x400 #define INVALID_INST_B 0x800 #define RR_REV_2 0x20000000 #define RR_REV_MASK 0xf0000000 /* * Local control register bits. */ #define INTA_STATE 0x01 #define CLEAR_INTA 0x02 #define FAST_EEPROM_ACCESS 0x08 #define ENABLE_EXTRA_SRAM 0x100 #define ENABLE_EXTRA_DESC 0x200 #define ENABLE_PARITY 0x400 #define FORCE_DMA_PARITY_ERROR 0x800 #define ENABLE_EEPROM_WRITE 0x1000 #define ENABLE_DATA_CACHE 0x2000 #define SRAM_LO_PARITY_ERR 0x4000 #define SRAM_HI_PARITY_ERR 0x8000 /* * PCI state bits. */ #define FORCE_PCI_RESET 0x01 #define PROVIDE_LENGTH 0x02 #define MASK_DMA_READ_MAX 0x1C #define RBURST_DISABLE 0x00 #define RBURST_4 0x04 #define RBURST_16 0x08 #define RBURST_32 0x0C #define RBURST_64 0x10 #define RBURST_128 0x14 #define RBURST_256 0x18 #define RBURST_1024 0x1C #define MASK_DMA_WRITE_MAX 0xE0 #define WBURST_DISABLE 0x00 #define WBURST_4 0x20 #define WBURST_16 0x40 #define WBURST_32 0x60 #define WBURST_64 0x80 #define WBURST_128 0xa0 #define WBURST_256 0xc0 #define WBURST_1024 0xe0 #define MASK_MIN_DMA 0xFF00 #define FIFO_RETRY_ENABLE 0x10000 /* * Event register */ #define DMA_WRITE_DONE 0x10000 #define DMA_READ_DONE 0x20000 #define DMA_WRITE_ERR 0x40000 #define DMA_READ_ERR 0x80000 /* * Receive state * * RoadRunner HIPPI Receive State Register controls and monitors the * HIPPI receive interface in the NIC. Look at err bits when a HIPPI * receive Error Event occurs. */ #define ENABLE_NEW_CON 0x01 #define RESET_RECV 0x02 #define RECV_ALL 0x00 #define RECV_1K 0x20 #define RECV_2K 0x40 #define RECV_4K 0x60 #define RECV_8K 0x80 #define RECV_16K 0xa0 #define RECV_32K 0xc0 #define RECV_64K 0xe0 /* * Transmit status. */ #define ENA_XMIT 0x01 #define PERM_CON 0x02 /* * DMA write state */ #define RESET_DMA 0x01 #define NO_SWAP_DMA 0x02 #define DMA_ACTIVE 0x04 #define THRESH_MASK 0x1F #define DMA_ERROR_MASK 0xff000000 /* * Gooddies stored in the ULA registers. */ #define TRACE_ON_WHAT_BIT 0x00020000 /* Traces on */ #define ONEM_BUF_WHAT_BIT 0x00040000 /* 1Meg vs 256K */ #define CHAR_API_WHAT_BIT 0x00080000 /* Char API vs network only */ #define CMD_EVT_WHAT_BIT 0x00200000 /* Command event */ #define LONG_TX_WHAT_BIT 0x00400000 #define LONG_RX_WHAT_BIT 0x00800000 #define WHAT_BIT_MASK 0xFFFD0000 /* Feature bit mask */ /* * Mode status */ #define EVENT_OVFL 0x80000000 #define FATAL_ERR 0x40000000 #define LOOP_BACK 0x01 #define MODE_PH 0x02 #define MODE_FP 0x00 #define PTR64BIT 0x04 #define PTR32BIT 0x00 #define PTR_WD_SWAP 0x08 #define PTR_WD_NOSWAP 0x00 #define POST_WARN_EVENT 0x10 #define ERR_TERM 0x20 #define DIRECT_CONN 0x40 #define NO_NIC_WATCHDOG 0x80 #define SWAP_DATA 0x100 #define SWAP_CONTROL 0x200 #define NIC_HALT_ON_ERR 0x400 #define NIC_NO_RESTART 0x800 #define HALF_DUP_TX 0x1000 #define HALF_DUP_RX 0x2000 /* * Error codes */ /* Host Error Codes - values of fail1 */ #define ERR_UNKNOWN_MBOX 0x1001 #define ERR_UNKNOWN_CMD 0x1002 #define ERR_MAX_RING 0x1003 #define ERR_RING_CLOSED 0x1004 #define ERR_RING_OPEN 0x1005 /* Firmware internal errors */ #define ERR_EVENT_RING_FULL 0x01 #define ERR_DW_PEND_CMND_FULL 0x02 #define ERR_DR_PEND_CMND_FULL 0x03 #define ERR_DW_PEND_DATA_FULL 0x04 #define ERR_DR_PEND_DATA_FULL 0x05 #define ERR_ILLEGAL_JUMP 0x06 #define ERR_UNIMPLEMENTED 0x07 #define ERR_TX_INFO_FULL 0x08 #define ERR_RX_INFO_FULL 0x09 #define ERR_ILLEGAL_MODE 0x0A #define ERR_MAIN_TIMEOUT 0x0B #define ERR_EVENT_BITS 0x0C #define ERR_UNPEND_FULL 0x0D #define ERR_TIMER_QUEUE_FULL 0x0E #define ERR_TIMER_QUEUE_EMPTY 0x0F #define ERR_TIMER_NO_FREE 0x10 #define ERR_INTR_START 0x11 #define ERR_BAD_STARTUP 0x12 #define ERR_NO_PKT_END 0x13 #define ERR_HALTED_ON_ERR 0x14 /* Hardware NIC Errors */ #define ERR_WRITE_DMA 0x0101 #define ERR_READ_DMA 0x0102 #define ERR_EXT_SERIAL 0x0103 #define ERR_TX_INT_PARITY 0x0104 /* * Event definitions */ #define EVT_RING_ENTRIES 64 #define EVT_RING_SIZE (EVT_RING_ENTRIES * sizeof(struct event)) struct event { #ifdef __LITTLE_ENDIAN u16 index; u8 ring; u8 code; #else u8 code; u8 ring; u16 index; #endif u32 timestamp; }; /* * General Events */ #define E_NIC_UP 0x01 #define E_WATCHDOG 0x02 #define E_STAT_UPD 0x04 #define E_INVAL_CMD 0x05 #define E_SET_CMD_CONS 0x06 #define E_LINK_ON 0x07 #define E_LINK_OFF 0x08 #define E_INTERN_ERR 0x09 #define E_HOST_ERR 0x0A #define E_STATS_UPDATE 0x0B #define E_REJECTING 0x0C /* * Send Events */ #define E_CON_REJ 0x13 #define E_CON_TMOUT 0x14 #define E_CON_NC_TMOUT 0x15 /* I , Connection No Campon Timeout */ #define E_DISC_ERR 0x16 #define E_INT_PRTY 0x17 #define E_TX_IDLE 0x18 #define E_TX_LINK_DROP 0x19 #define E_TX_INV_RNG 0x1A #define E_TX_INV_BUF 0x1B #define E_TX_INV_DSC 0x1C /* * Destination Events */ /* * General Receive events */ #define E_VAL_RNG 0x20 #define E_RX_RNG_ENER 0x21 #define E_INV_RNG 0x22 #define E_RX_RNG_SPC 0x23 #define E_RX_RNG_OUT 0x24 #define E_PKT_DISCARD 0x25 #define E_INFO_EVT 0x27 /* * Data corrupted events */ #define E_RX_PAR_ERR 0x2B #define E_RX_LLRC_ERR 0x2C #define E_IP_CKSM_ERR 0x2D #define E_DTA_CKSM_ERR 0x2E #define E_SHT_BST 0x2F /* * Data lost events */ #define E_LST_LNK_ERR 0x30 #define E_FLG_SYN_ERR 0x31 #define E_FRM_ERR 0x32 #define E_RX_IDLE 0x33 #define E_PKT_LN_ERR 0x34 #define E_STATE_ERR 0x35 #define E_UNEXP_DATA 0x3C /* * Fatal events */ #define E_RX_INV_BUF 0x36 #define E_RX_INV_DSC 0x37 #define E_RNG_BLK 0x38 /* * Warning events */ #define E_RX_TO 0x39 #define E_BFR_SPC 0x3A #define E_INV_ULP 0x3B #define E_NOT_IMPLEMENTED 0x40 /* * Commands */ #define CMD_RING_ENTRIES 16 struct cmd { #ifdef __LITTLE_ENDIAN u16 index; u8 ring; u8 code; #else u8 code; u8 ring; u16 index; #endif }; #define C_START_FW 0x01 #define C_UPD_STAT 0x02 #define C_WATCHDOG 0x05 #define C_DEL_RNG 0x09 #define C_NEW_RNG 0x0A #define C_CONN 0x0D /* * Mode bits */ #define PACKET_BAD 0x01 /* Packet had link-layer error */ #define INTERRUPT 0x02 #define TX_IP_CKSUM 0x04 #define PACKET_END 0x08 #define PACKET_START 0x10 #define SAME_IFIELD 0x80 typedef struct { #if (BITS_PER_LONG == 64) u64 addrlo; #else u32 addrhi; u32 addrlo; #endif } rraddr; static inline void set_rraddr(rraddr *ra, dma_addr_t addr)