/* SPDX-License-Identifier: GPL-2.0-only *//* * Copyright (c) 2013-2021, Arm Limited. * * Adapted from the original at: * https://github.com/ARM-software/optimized-routines/blob/e823e3abf5f89ecb/string/aarch64/memcmp.S */ #include <linux/linkage.h>#include <asm/assembler.h> /* Assumptions: * * ARMv8-a, AArch64, unaligned accesses. */ #define L(label) .L ## label /* Parameters and result.  */#define src1		x0#define src2		x1#define limit		x2#define result		w0 /* Internal variables.  */#define data1		x3#define data1w		w3#define data1h		x4#define data2		x5#define data2w		w5#define data2h		x6#define tmp1		x7#define tmp2		x8 SYM_FUNC_START(__pi_memcmp)	subs	limit, limit, 8	b.lo	L(less8) 	ldr	data1, [src1], 8	ldr	data2, [src2], 8	cmp	data1, data2	b.ne	L(return) 	subs	limit, limit, 8	b.gt	L(more16) 	ldr	data1, [src1, limit]	ldr	data2, [src2, limit]	b	L(return) L(more16):	ldr	data1, [src1], 8	ldr	data2, [src2], 8	cmp	data1, data2	bne	L(return) 	/* Jump directly to comparing the last 16 bytes for 32 byte (or less)	   strings.  */	subs	limit, limit, 16	b.ls	L(last_bytes) 	/* We overlap loads between 0-32 bytes at either side of SRC1 when we	   try to align, so limit it only to strings larger than 128 bytes.  */	cmp	limit, 96	b.ls	L(loop16) 	/* Align src1 and adjust src2 with bytes not yet done.  */	and	tmp1, src1, 15	add	limit, limit, tmp1	sub	src1, src1, tmp1	sub	src2, src2, tmp1 	/* Loop performing 16 bytes per iteration using aligned src1.	   Limit is pre-decremented by 16 and must be larger than zero.	   Exit if <= 16 bytes left to do or if the data is not equal.  */	.p2align 4L(loop16):	ldp	data1, data1h, [src1], 16	ldp	data2, data2h, [src2], 16	subs	limit, limit, 16	ccmp	data1, data2, 0, hi	ccmp	data1h, data2h, 0, eq	b.eq	L(loop16) 	cmp	data1, data2	bne	L(return)	mov	data1, data1h	mov	data2, data2h	cmp	data1, data2	bne	L(return) 	/* Compare last 1-16 bytes using unaligned access.  */L(last_bytes):	add	src1, src1, limit	add	src2, src2, limit	ldp	data1, data1h, [src1]	ldp	data2, data2h, [src2]	cmp	data1, data2	bne	L(return)	mov	data1, data1h	mov	data2, data2h	cmp	data1, data2 	/* Compare data bytes and set return value to 0, -1 or 1.  */L(return):#ifndef __AARCH64EB__	rev	data1, data1	rev	data2, data2#endif	cmp	data1, data2L(ret_eq):	cset	result, ne	cneg	result, result, lo	ret 	.p2align 4	/* Compare up to 8 bytes.  Limit is [-8..-1].  */L(less8):	adds	limit, limit, 4	b.lo	L(less4)	ldr	data1w, [src1], 4	ldr	data2w, [src2], 4	cmp	data1w, data2w	b.ne	L(return)	sub	limit, limit, 4L(less4):	adds	limit, limit, 4	beq	L(ret_eq)L(byte_loop):	ldrb	data1w, [src1], 1	ldrb	data2w, [src2], 1	subs	limit, limit, 1	ccmp	data1w, data2w, 0, ne	/* NZCV = 0b0000.  */	b.eq	L(byte_loop)	sub	result, data1w, data2w	retSYM_FUNC_END(__pi_memcmp)SYM_FUNC_ALIAS_WEAK(memcmp, __pi_memcmp)EXPORT_SYMBOL_NOKASAN(memcmp)