Mike Rapoport (Microsoft)arch, mm: consolidate empty_zero_page6215d9f9 months agoHistory
365 lines · 8.3 KB · Assembly
RawDownload
/* SPDX-License-Identifier: GPL-2.0 * $Id: head.S,v 1.7 2003/09/01 17:58:19 lethal Exp $ * *  arch/sh/kernel/head.S * *  Copyright (C) 1999, 2000  Niibe Yutaka & Kaz Kojima *  Copyright (C) 2010  Matt Fleming * * Head.S contains the SH exception handlers and startup code. */#include <linux/init.h>#include <linux/linkage.h>#include <asm/thread_info.h>#include <asm/mmu.h>#include <cpu/mmu_context.h> #ifdef CONFIG_CPU_SH4A#define SYNCO()		synco #define PREFI(label, reg)	\	mov.l	label, reg;	\	prefi	@reg#else#define SYNCO()#define PREFI(label, reg)#endif 	.section	.empty_zero_page, "aw"ENTRY(boot_params_page)	.long	1		/* MOUNT_ROOT_RDONLY */	.long	0		/* RAMDISK_FLAGS */	.long	0x0200		/* ORIG_ROOT_DEV */	.long	1		/* LOADER_TYPE */	.long	0x00000000	/* INITRD_START */	.long	0x00000000	/* INITRD_SIZE */#ifdef CONFIG_32BIT	.long	0x53453f00 + 32	/* "SE?" = 32 bit */#else	.long	0x53453f00 + 29	/* "SE?" = 29 bit */#endif1:	.skip	PAGE_SIZE - boot_params_page - 1b 	__HEAD /* * Condition at the entry of _stext: * *   BSC has already been initialized. *   INTC may or may not be initialized. *   VBR may or may not be initialized. *   MMU may or may not be initialized. *   Cache may or may not be initialized. *   Hardware (including on-chip modules) may or may not be initialized.  * */ENTRY(_stext)	!			Initialize Status Register	mov.l	1f, r0		! MD=1, RB=0, BL=0, IMASK=0xF	ldc	r0, sr	!			Initialize global interrupt mask#ifdef CONFIG_CPU_HAS_SR_RB	mov	#0, r0	ldc	r0, r6_bank#endif #ifdef CONFIG_OF_EARLY_FLATTREE	mov	r4, r12		! Store device tree blob pointer in r12#endif		/*	 * Prefetch if possible to reduce cache miss penalty.	 *	 * We do this early on for SH-4A as a micro-optimization,	 * as later on we will have speculative execution enabled	 * and this will become less of an issue.	 */	PREFI(5f, r0)	PREFI(6f, r0) 	!	mov.l	2f, r0	mov	r0, r15		! Set initial r15 (stack pointer)#ifdef CONFIG_CPU_HAS_SR_RB	mov.l	7f, r0	ldc	r0, r7_bank	! ... and initial thread_info#endif #ifdef CONFIG_PMB/* * Reconfigure the initial PMB mappings setup by the hardware. * * When we boot in 32-bit MMU mode there are 2 PMB entries already * setup for us. * * Entry       VPN	   PPN	    V	SZ	C	UB	WT * --------------------------------------------------------------- *   0	    0x80000000 0x00000000   1  512MB	1	0	1 *   1	    0xA0000000 0x00000000   1  512MB	0	0	0 * * But we reprogram them here because we want complete control over * our address space and the initial mappings may not map PAGE_OFFSET * to __MEMORY_START (or even map all of our RAM). * * Once we've setup cached and uncached mappings we clear the rest of the * PMB entries. This clearing also deals with the fact that PMB entries * can persist across reboots. The PMB could have been left in any state * when the reboot occurred, so to be safe we clear all entries and start * with with a clean slate. * * The uncached mapping is constructed using the smallest possible * mapping with a single unbufferable page. Only the kernel text needs to * be covered via the uncached mapping so that certain functions can be * run uncached. * * Drivers and the like that have previously abused the 1:1 identity * mapping are unsupported in 32-bit mode and must specify their caching * preference when page tables are constructed. * * This frees up the P2 space for more nefarious purposes. * * Register utilization is as follows: * *	r0 = PMB_DATA data field *	r1 = PMB_DATA address field *	r2 = PMB_ADDR data field *	r3 = PMB_ADDR address field *	r4 = PMB_E_SHIFT *	r5 = remaining amount of RAM to map *	r6 = PMB mapping size we're trying to use *	r7 = cached_to_uncached *	r8 = scratch register *	r9 = scratch register *	r10 = number of PMB entries we've setup *	r11 = scratch register */ 	mov.l	.LMMUCR, r1	/* Flush the TLB */	mov.l	@r1, r0	or	#MMUCR_TI, r0	mov.l	r0, @r1 	mov.l	.LMEMORY_SIZE, r5 	mov	#PMB_E_SHIFT, r0	mov	#0x1, r4	shld	r0, r4 	mov.l	.LFIRST_DATA_ENTRY, r0	mov.l	.LPMB_DATA, r1	mov.l	.LFIRST_ADDR_ENTRY, r2	mov.l	.LPMB_ADDR, r3 	/*	 * First we need to walk the PMB and figure out if there are any	 * existing mappings that match the initial mappings VPN/PPN.	 * If these have already been established by the bootloader, we	 * don't bother setting up new entries here, and let the late PMB	 * initialization take care of things instead.	 *	 * Note that we may need to coalesce and merge entries in order	 * to reclaim more available PMB slots, which is much more than	 * we want to do at this early stage.	 */	mov	#0, r10	mov	#NR_PMB_ENTRIES, r9 	mov	r1, r7		/* temporary PMB_DATA iter */ .Lvalidate_existing_mappings: 	mov.l	.LPMB_DATA_MASK, r11	mov.l	@r7, r8	and	r11, r8	cmp/eq	r0, r8		/* Check for valid __MEMORY_START mappings */	bt	.Lpmb_done 	add	#1, r10		/* Increment the loop counter */	cmp/eq	r9, r10	bf/s	.Lvalidate_existing_mappings	 add	r4, r7		/* Increment to the next PMB_DATA entry */ 	/*	 * If we've fallen through, continue with setting up the initial	 * mappings.	 */ 	mov	r5, r7		/* cached_to_uncached */	mov	#0, r10 #ifdef CONFIG_UNCACHED_MAPPING	/*	 * Uncached mapping	 */	mov	#(PMB_SZ_16M >> 2), r9	shll2	r9 	mov	#(PMB_UB >> 8), r8	shll8	r8 	or	r0, r8	or	r9, r8	mov.l	r8, @r1	mov	r2, r8	add	r7, r8	mov.l	r8, @r3 	add	r4, r1	add	r4, r3	add	#1, r10#endif /* * Iterate over all of the available sizes from largest to * smallest for constructing the cached mapping. */#define __PMB_ITER_BY_SIZE(size)			\.L##size:						\	mov	#(size >> 4), r6;			\	shll16	r6;					\	shll8	r6;					\							\	cmp/hi	r5, r6;					\	bt	9999f;					\							\	mov	#(PMB_SZ_##size##M >> 2), r9;		\	shll2	r9;					\							\	/*						\	 * Cached mapping				\	 */						\	mov	#PMB_C, r8;				\	or	r0, r8;					\	or	r9, r8;					\	mov.l	r8, @r1;				\	mov.l	r2, @r3;				\							\	/* Increment to the next PMB_DATA entry */	\	add	r4, r1;					\	/* Increment to the next PMB_ADDR entry */	\	add	r4, r3;					\	/* Increment number of PMB entries */		\	add	#1, r10;				\							\	sub	r6, r5;					\	add	r6, r0;					\	add	r6, r2;					\							\	bra	.L##size;				\9999: 	__PMB_ITER_BY_SIZE(512)	__PMB_ITER_BY_SIZE(128)	__PMB_ITER_BY_SIZE(64)	__PMB_ITER_BY_SIZE(16) #ifdef CONFIG_UNCACHED_MAPPING	/*	 * Now that we can access it, update cached_to_uncached and	 * uncached_size.	 */	mov.l	.Lcached_to_uncached, r0	mov.l	r7, @r0 	mov.l	.Luncached_size, r0	mov	#1, r7	shll16	r7	shll8	r7	mov.l	r7, @r0#endif 	/*	 * Clear the remaining PMB entries.	 *	 * r3 = entry to begin clearing from	 * r10 = number of entries we've setup so far	 */	mov	#0, r1	mov	#NR_PMB_ENTRIES, r0 .Lagain:	mov.l	r1, @r3		/* Clear PMB_ADDR entry */	add	#1, r10		/* Increment the loop counter */	cmp/eq	r0, r10	bf/s	.Lagain	 add	r4, r3		/* Increment to the next PMB_ADDR entry */ 	mov.l	6f, r0	icbi	@r0 .Lpmb_done:#endif /* CONFIG_PMB */ #ifndef CONFIG_SH_NO_BSS_INIT	/*	 * Don't clear BSS if running on slow platforms such as an RTL simulation,	 * remote memory via SHdebug link, etc.  For these the memory can be guaranteed	 * to be all zero on boot anyway.	 */				! Clear BSS area#ifdef CONFIG_SMP		mov.l	3f, r0	cmp/eq	#0, r0		! skip clear if set to zero	bt	10f#endif		mov.l	3f, r1	add	#4, r1	mov.l	4f, r2	mov	#0, r09:	cmp/hs	r2, r1	bf/s	9b		! while (r1 < r2)	 mov.l	r0,@-r2 10:		#endif #ifdef CONFIG_OF_EARLY_FLATTREE	mov.l	8f, r0		! Make flat device tree available early.	jsr	@r0	 mov	r12, r4#endif 	!			Additional CPU initialization	mov.l	6f, r0	jsr	@r0	 nop 	SYNCO()			! Wait for pending instructions..		!			Start kernel	mov.l	5f, r0	jmp	@r0	 nop 	.balign 4#if defined(CONFIG_CPU_SH2)1:	.long	0x000000F0		! IMASK=0xF#else1:	.long	0x500080F0		! MD=1, RB=0, BL=1, FD=1, IMASK=0xF#endifENTRY(stack_start)2:	.long	init_thread_union+THREAD_SIZE3:	.long	__bss_start4:	.long	_end5:	.long	start_kernel6:	.long	cpu_init7:	.long	init_thread_union#if defined(CONFIG_OF_EARLY_FLATTREE)8:	.long	sh_fdt_init#endif #ifdef CONFIG_PMB.LPMB_ADDR:		.long	PMB_ADDR.LPMB_DATA:		.long	PMB_DATA.LPMB_DATA_MASK:	.long	PMB_PFN_MASK | PMB_V.LFIRST_ADDR_ENTRY:	.long	PAGE_OFFSET | PMB_V.LFIRST_DATA_ENTRY:	.long	__MEMORY_START | PMB_V.LMMUCR:		.long	MMUCR.LMEMORY_SIZE:		.long	__MEMORY_SIZE#ifdef CONFIG_UNCACHED_MAPPING.Lcached_to_uncached:	.long	cached_to_uncached.Luncached_size:	.long	uncached_size#endif#endif

Keyboard shortcuts

General

Show keyboard shortcuts
?
Focus the current search
/

Issues and pull requests

Open filters
f

Issues, pull requests and Inbox

Select next item
j↓
Select previous item
k↑
Open selected item
Enter
Dismiss filters or clear selection
Esc

Repository code

Go to file
t