// SPDX-License-Identifier: GPL-2.0/* * check TSC synchronization. * * Copyright (C) 2006, Red Hat, Inc., Ingo Molnar * * We check whether all boot CPUs have their TSC's synchronized, * print a warning if not and turn off the TSC clock-source. * * The warp-check is point-to-point between two CPUs, the CPU * initiating the bootup is the 'source CPU', the freshly booting * CPU is the 'target CPU'. * * Only two CPUs may participate - they can enter in any order. * ( The serial nature of the boot logic and the CPU hotplug lock * protects against more than 2 CPUs entering this code. ) */#include <linux/workqueue.h>#include <linux/topology.h>#include <linux/spinlock.h>#include <linux/kernel.h>#include <linux/smp.h>#include <linux/nmi.h>#include <asm/msr.h>#include <asm/tsc.h> struct tsc_adjust { s64 bootval; s64 adjusted; unsigned long nextcheck; bool warned;}; static DEFINE_PER_CPU(struct tsc_adjust, tsc_adjust);static struct timer_list tsc_sync_check_timer; /* * TSC's on different sockets may be reset asynchronously. * This may cause the TSC ADJUST value on socket 0 to be NOT 0. */bool __read_mostly tsc_async_resets; void mark_tsc_async_resets(char *reason){ if (tsc_async_resets) return; tsc_async_resets = true; pr_info("tsc: Marking TSC async resets true due to %s\n", reason);} void tsc_verify_tsc_adjust(bool resume){ struct tsc_adjust *adj = this_cpu_ptr(&tsc_adjust); s64 curval; if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST)) return; /* Skip unnecessary error messages if TSC already unstable */ if (check_tsc_unstable()) return; /* Rate limit the MSR check */ if (!resume && time_before(jiffies, adj->nextcheck)) return; adj->nextcheck = jiffies + HZ; rdmsrq(MSR_IA32_TSC_ADJUST, curval); if (adj->adjusted == curval) return; /* Restore the original value */ wrmsrq(MSR_IA32_TSC_ADJUST, adj->adjusted); if (!adj->warned || resume) { pr_warn(FW_BUG "TSC ADJUST differs: CPU%u %lld --> %lld. Restoring\n", smp_processor_id(), adj->adjusted, curval); adj->warned = true; }} /* * Normally the tsc_sync will be checked every time system enters idle * state, but there is still caveat that a system won't enter idle, * either because it's too busy or configured purposely to not enter * idle. * * So setup a periodic timer (every 10 minutes) to make sure the check * is always on. */ #define SYNC_CHECK_INTERVAL (HZ * 600) static void tsc_sync_check_timer_fn(struct timer_list *unused){ int next_cpu; tsc_verify_tsc_adjust(false); /* Run the check for all onlined CPUs in turn */ next_cpu = cpumask_next(raw_smp_processor_id(), cpu_online_mask); if (next_cpu >= nr_cpu_ids) next_cpu = cpumask_first(cpu_online_mask); tsc_sync_check_timer.expires += SYNC_CHECK_INTERVAL; add_timer_on(&tsc_sync_check_timer, next_cpu);} static int __init start_sync_check_timer(void){ if (!cpu_feature_enabled(X86_FEATURE_TSC_ADJUST) || tsc_clocksource_reliable) return 0; timer_setup(&tsc_sync_check_timer, tsc_sync_check_timer_fn, 0); tsc_sync_check_timer.expires = jiffies + SYNC_CHECK_INTERVAL; add_timer(&tsc_sync_check_timer); return 0;}late_initcall(start_sync_check_timer); static void tsc_sanitize_first_cpu(struct tsc_adjust *cur, s64 bootval, unsigned int cpu, bool bootcpu){ /* * First online CPU in a package stores the boot value in the * adjustment value. This value might change later via the sync * mechanism. If that fails we still can yell about boot values not * being consistent. * * On the boot cpu we just force set the ADJUST value to 0 if it's * non zero. We don't do that on non boot cpus because physical * hotplug should have set the ADJUST register to a value > 0 so * the TSC is in sync with the already running cpus. * * Also don't force the ADJUST value to zero if that is a valid value * for socket 0 as determined by the system arch. This is required * when multiple sockets are reset asynchronously with each other * and socket 0 may not have an TSC ADJUST value of 0. */ if (bootcpu && bootval != 0) { if (likely(!tsc_async_resets)) { pr_warn(FW_BUG "TSC ADJUST: CPU%u: %lld force to 0\n", cpu, bootval); wrmsrq(MSR_IA32_TSC_ADJUST, 0); bootval = 0; } else { pr_info("TSC ADJUST: CPU%u: %lld NOT forced to 0\n", cpu, bootval); } } cur->adjusted = bootval;} #ifndef CONFIG_SMPbool __init tsc_store_and_check_tsc_adjust(bool bootcpu){ struct tsc_adjust *cur = this_cpu_ptr(&tsc_adjust); s64 bootval; if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST)) return false; /* Skip unnecessary error messages if TSC already unstable */ if (check_tsc_unstable()) return false; rdmsrq(MSR_IA32_TSC_ADJUST, bootval); cur->bootval = bootval; cur->nextcheck = jiffies + HZ; tsc_sanitize_first_cpu(cur, bootval, smp_processor_id(), bootcpu); return false;} #else /* !CONFIG_SMP */ /* * Store and check the TSC ADJUST MSR if available */bool tsc_store_and_check_tsc_adjust(bool bootcpu){ struct tsc_adjust *ref, *cur = this_cpu_ptr(&tsc_adjust); unsigned int refcpu, cpu = smp_processor_id(); struct cpumask *mask; s64 bootval; if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST)) return false; rdmsrq(MSR_IA32_TSC_ADJUST, bootval); cur->bootval = bootval; cur->nextcheck = jiffies + HZ; cur->warned = false; /* * The default adjust value cannot be assumed to be zero on any socket. */ cur->adjusted = bootval; /* * Check whether this CPU is the first in a package to come up. In * this case do not check the boot value against another package * because the new package might have been physically hotplugged, * where TSC_ADJUST is expected to be different. When called on the * boot CPU topology_core_cpumask() might not be available yet. */ mask = topology_core_cpumask(cpu); refcpu = mask ? cpumask_any_but(mask, cpu) : nr_cpu_ids; if (refcpu >= nr_cpu_ids) { tsc_sanitize_first_cpu(cur, bootval, smp_processor_id(), bootcpu); return false; } ref = per_cpu_ptr(&tsc_adjust, refcpu); /* * Compare the boot value and complain if it differs in the * package. */ if (bootval != ref->bootval) printk_once(FW_BUG "TSC ADJUST differs within socket(s), fixing all errors\n"); /* * The TSC_ADJUST values in a package must be the same. If the boot * value on this newly upcoming CPU differs from the adjustment * value of the already online CPU in this package, set it to that * adjusted value. */ if (bootval != ref->adjusted) { cur->adjusted = ref->adjusted; wrmsrq(MSR_IA32_TSC_ADJUST, ref->adjusted); } /* * We have the TSCs forced to be in sync on this package. Skip sync * test: */ return true;} /* * Entry/exit counters that make sure that both CPUs * run the measurement code at once: */static atomic_t start_count;static atomic_t stop_count;static atomic_t test_runs; /* * We use a raw spinlock in this exceptional case, because * we want to have the fastest, inlined, non-debug version * of a critical section, to be able to prove TSC time-warps: */static arch_spinlock_t sync_lock = __ARCH_SPIN_LOCK_UNLOCKED; static cycles_t last_tsc;static cycles_t max_warp;static int nr_warps;static int random_warps; /* * TSC-warp measurement loop running on both CPUs. This is not called * if there is no TSC. */static cycles_t check_tsc_warp(unsigned int timeout){ cycles_t start, now, prev, end, cur_max_warp = 0; int i, cur_warps = 0; start = rdtsc_ordered(); /* * The measurement runs for 'timeout' msecs: */ end = start + (cycles_t) tsc_khz * timeout; for (i = 0; ; i++) { /* * We take the global lock, measure TSC, save the * previous TSC that was measured (possibly on * another CPU) and update the previous TSC timestamp. */ arch_spin_lock(&sync_lock); prev = last_tsc; now = rdtsc_ordered(); last_tsc = now; arch_spin_unlock(&sync_lock); /* * Be nice every now and then (and also check whether * measurement is done [we also insert a 10 million * loops safety exit, so we dont lock up in case the * TSC readout is totally broken]): */ if (unlikely(!(i & 7))) { if (now > end || i > 10000000) break; cpu_relax(); touch_nmi_watchdog(); } /* * Outside the critical section we can now see whether * we saw a time-warp of the TSC going backwards: */ if (unlikely(prev > now)) { arch_spin_lock(&sync_lock); max_warp = max(max_warp, prev - now); cur_max_warp = max_warp; /* * Check whether this bounces back and forth. Only * one CPU should observe time going backwards. */ if (cur_warps != nr_warps) random_warps++; nr_warps++; cur_warps = nr_warps; arch_spin_unlock(&sync_lock); } } WARN(!(now-start), "Warning: zero tsc calibration delta: %Ld [max: %Ld]\n", now-start, end-start); return cur_max_warp;} /* * If the target CPU coming online doesn't have any of its core-siblings * online, a timeout of 20msec will be used for the TSC-warp measurement * loop. Otherwise a smaller timeout of 2msec will be used, as we have some * information about this socket already (and this information grows as we * have more and more logical-siblings in that socket). * * Ideally we should be able to skip the TSC sync check on the other * core-siblings, if the first logical CPU in a socket passed the sync test. * But as the TSC is per-logical CPU and can potentially be modified wrongly * by the bios, TSC sync test for smaller duration should be able * to catch such errors. Also this will catch the condition where all the * cores in the socket don't get reset at the same time. */static inline unsigned int loop_timeout(int cpu){ return (cpumask_weight(topology_core_cpumask(cpu)) > 1) ? 2 : 20;} static void tsc_sync_mark_tsc_unstable(struct work_struct *work){ mark_tsc_unstable("check_tsc_sync_source failed");} static DECLARE_WORK(tsc_sync_work, tsc_sync_mark_tsc_unstable); /* * The freshly booted CPU initiates this via an async SMP function call. */static void check_tsc_sync_source(void *__cpu){ unsigned int cpu = (unsigned long)__cpu; int cpus = 2; /* * Set the maximum number of test runs to * 1 if the CPU does not provide the TSC_ADJUST MSR * 3 if the MSR is available, so the target can try to adjust */ if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST)) atomic_set(&test_runs, 1); else atomic_set(&test_runs, 3);retry: /* Wait for the target to start. */ while (atomic_read(&start_count) != cpus - 1) cpu_relax(); /* * Trigger the target to continue into the measurement too: */ atomic_inc(&start_count); check_tsc_warp(loop_timeout(cpu)); while (atomic_read(&stop_count) != cpus-1) cpu_relax(); /* * If the test was successful set the number of runs to zero and * stop. If not, decrement the number of runs an check if we can * retry. In case of random warps no retry is attempted. */ if (!nr_warps) { atomic_set(&test_runs, 0); pr_debug("TSC synchronization [CPU#%d -> CPU#%u]: passed\n", smp_processor_id(), cpu); } else if (atomic_dec_and_test(&test_runs) || random_warps) { /* Force it to 0 if random warps brought us here */ atomic_set(&test_runs, 0); pr_warn("TSC synchronization [CPU#%d -> CPU#%u]:\n", smp_processor_id(), cpu); pr_warn("Measured %Ld cycles TSC warp between CPUs, " "turning off TSC clock.\n", max_warp); if (random_warps) pr_warn("TSC warped randomly between CPUs\n"); schedule_work(&tsc_sync_work); } /* * Reset it - just in case we boot another CPU later: */ atomic_set(&start_count, 0); random_warps = 0; nr_warps = 0; max_warp = 0; last_tsc = 0; /* * Let the target continue with the bootup: */ atomic_inc(&stop_count); /* * Retry, if there is a chance to do so. */ if (atomic_read(&test_runs) > 0) goto retry;} /* * Freshly booted CPUs call into this: */void check_tsc_sync_target(void){ struct tsc_adjust *cur = this_cpu_ptr(&tsc_adjust); unsigned int cpu = smp_processor_id(); cycles_t cur_max_warp, gbl_max_warp; int cpus = 2; /* Also aborts if there is no TSC. */ if (unsynchronized_tsc()) return; /* * Store, verify and sanitize the TSC adjust register. If * successful skip the test. * * The test is also skipped when the TSC is marked reliable. This * is true for SoCs which have no fallback clocksource. On these * SoCs the TSC is frequency synchronized, but still the TSC ADJUST * register might have been wreckaged by the BIOS.. */ if (tsc_store_and_check_tsc_adjust(false) || tsc_clocksource_reliable) return; /* Kick the control CPU into the TSC synchronization function */ smp_call_function_single(cpumask_first(cpu_online_mask), check_tsc_sync_source, (unsigned long *)(unsigned long)cpu, 0);retry: /* * Register this CPU's participation and wait for the * source CPU to start the measurement: */ atomic_inc(&start_count); while (atomic_read(&start_count) != cpus) cpu_relax(); cur_max_warp = check_tsc_warp(loop_timeout(cpu)); /* * Store the maximum observed warp value for a potential retry: */ gbl_max_warp = max_warp; /* * Ok, we are done: */ atomic_inc(&stop_count); /* * Wait for the source CPU to print stuff: */ while (atomic_read(&stop_count) != cpus) cpu_relax(); /* * Reset it for the next sync test: */ atomic_set(&stop_count, 0); /* * Check the number of remaining test runs. If not zero, the test * failed and a retry with adjusted TSC is possible. If zero the * test was either successful or failed terminally. */ if (!atomic_read(&test_runs)) return; /* * If the warp value of this CPU is 0, then the other CPU * observed time going backwards so this TSC was ahead andLines 1–500 of 527. Load more
// SPDX-License-Identifier: GPL-2.0 /* * check TSC synchronization. * * Copyright (C) 2006, Red Hat, Inc., Ingo Molnar * * We check whether all boot CPUs have their TSC's synchronized, * print a warning if not and turn off the TSC clock-source. * * The warp-check is point-to-point between two CPUs, the CPU * initiating the bootup is the 'source CPU', the freshly booting * CPU is the 'target CPU'. * * Only two CPUs may participate - they can enter in any order. * ( The serial nature of the boot logic and the CPU hotplug lock * protects against more than 2 CPUs entering this code. ) */ #include <linux/workqueue.h> #include <linux/topology.h> #include <linux/spinlock.h> #include <linux/kernel.h> #include <linux/smp.h> #include <linux/nmi.h> #include <asm/msr.h> #include <asm/tsc.h> struct tsc_adjust { s64 bootval; s64 adjusted; unsigned long nextcheck; bool warned; }; static DEFINE_PER_CPU(struct tsc_adjust, tsc_adjust); static struct timer_list tsc_sync_check_timer; /* * TSC's on different sockets may be reset asynchronously. * This may cause the TSC ADJUST value on socket 0 to be NOT 0. */ bool __read_mostly tsc_async_resets; void mark_tsc_async_resets(char *reason) { if (tsc_async_resets) return; tsc_async_resets = true; pr_info("tsc: Marking TSC async resets true due to %s\n", reason); } void tsc_verify_tsc_adjust(bool resume) { struct tsc_adjust *adj = this_cpu_ptr(&tsc_adjust); s64 curval; if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST)) return; /* Skip unnecessary error messages if TSC already unstable */ if (check_tsc_unstable()) return; /* Rate limit the MSR check */ if (!resume && time_before(jiffies, adj->nextcheck)) return; adj->nextcheck = jiffies + HZ; rdmsrq(MSR_IA32_TSC_ADJUST, curval); if (adj->adjusted == curval) return; /* Restore the original value */ wrmsrq(MSR_IA32_TSC_ADJUST, adj->adjusted); if (!adj->warned || resume) { pr_warn(FW_BUG "TSC ADJUST differs: CPU%u %lld --> %lld. Restoring\n", smp_processor_id(), adj->adjusted, curval); adj->warned = true; } } /* * Normally the tsc_sync will be checked every time system enters idle * state, but there is still caveat that a system won't enter idle, * either because it's too busy or configured purposely to not enter * idle. * * So setup a periodic timer (every 10 minutes) to make sure the check * is always on. */ #define SYNC_CHECK_INTERVAL (HZ * 600) static void tsc_sync_check_timer_fn(struct timer_list *unused) { int next_cpu; tsc_verify_tsc_adjust(false); /* Run the check for all onlined CPUs in turn */ next_cpu = cpumask_next(raw_smp_processor_id(), cpu_online_mask); if (next_cpu >= nr_cpu_ids) next_cpu = cpumask_first(cpu_online_mask); tsc_sync_check_timer.expires += SYNC_CHECK_INTERVAL; add_timer_on(&tsc_sync_check_timer, next_cpu); } static int __init start_sync_check_timer(void) { if (!cpu_feature_enabled(X86_FEATURE_TSC_ADJUST) || tsc_clocksource_reliable) return 0; timer_setup(&tsc_sync_check_timer, tsc_sync_check_timer_fn, 0); tsc_sync_check_timer.expires = jiffies + SYNC_CHECK_INTERVAL; add_timer(&tsc_sync_check_timer); return 0; } late_initcall(start_sync_check_timer); static void tsc_sanitize_first_cpu(struct tsc_adjust *cur, s64 bootval, unsigned int cpu, bool bootcpu) { /* * First online CPU in a package stores the boot value in the * adjustment value. This value might change later via the sync * mechanism. If that fails we still can yell about boot values not * being consistent. * * On the boot cpu we just force set the ADJUST value to 0 if it's * non zero. We don't do that on non boot cpus because physical * hotplug should have set the ADJUST register to a value > 0 so * the TSC is in sync with the already running cpus. * * Also don't force the ADJUST value to zero if that is a valid value * for socket 0 as determined by the system arch. This is required * when multiple sockets are reset asynchronously with each other * and socket 0 may not have an TSC ADJUST value of 0. */ if (bootcpu && bootval != 0) { if (likely(!tsc_async_resets)) { pr_warn(FW_BUG "TSC ADJUST: CPU%u: %lld force to 0\n", cpu, bootval); wrmsrq(MSR_IA32_TSC_ADJUST, 0); bootval = 0; } else { pr_info("TSC ADJUST: CPU%u: %lld NOT forced to 0\n", cpu, bootval); } } cur->adjusted = bootval; } #ifndef CONFIG_SMP bool __init tsc_store_and_check_tsc_adjust(bool bootcpu) { struct tsc_adjust *cur = this_cpu_ptr(&tsc_adjust); s64 bootval; if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST)) return false; /* Skip unnecessary error messages if TSC already unstable */ if (check_tsc_unstable()) return false; rdmsrq(MSR_IA32_TSC_ADJUST, bootval); cur->bootval = bootval; cur->nextcheck = jiffies + HZ; tsc_sanitize_first_cpu(cur, bootval, smp_processor_id(), bootcpu); return false; } #else /* !CONFIG_SMP */ /* * Store and check the TSC ADJUST MSR if available */ bool tsc_store_and_check_tsc_adjust(bool bootcpu) { struct tsc_adjust *ref, *cur = this_cpu_ptr(&tsc_adjust); unsigned int refcpu, cpu = smp_processor_id(); struct cpumask *mask; s64 bootval; if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST)) return false; rdmsrq(MSR_IA32_TSC_ADJUST, bootval); cur->bootval = bootval; cur->nextcheck = jiffies + HZ; cur->warned = false; /* * The default adjust value cannot be assumed to be zero on any socket. */ cur->adjusted = bootval; /* * Check whether this CPU is the first in a package to come up. In * this case do not check the boot value against another package * because the new package might have been physically hotplugged, * where TSC_ADJUST is expected to be different. When called on the * boot CPU topology_core_cpumask() might not be available yet. */ mask = topology_core_cpumask(cpu); refcpu = mask ? cpumask_any_but(mask, cpu) : nr_cpu_ids; if (refcpu >= nr_cpu_ids) { tsc_sanitize_first_cpu(cur, bootval, smp_processor_id(), bootcpu); return false; } ref = per_cpu_ptr(&tsc_adjust, refcpu); /* * Compare the boot value and complain if it differs in the * package. */ if (bootval != ref->bootval) printk_once(FW_BUG "TSC ADJUST differs within socket(s), fixing all errors\n"); /* * The TSC_ADJUST values in a package must be the same. If the boot * value on this newly upcoming CPU differs from the adjustment * value of the already online CPU in this package, set it to that * adjusted value. */ if (bootval != ref->adjusted) { cur->adjusted = ref->adjusted; wrmsrq(MSR_IA32_TSC_ADJUST, ref->adjusted); } /* * We have the TSCs forced to be in sync on this package. Skip sync * test: */ return true; } /* * Entry/exit counters that make sure that both CPUs * run the measurement code at once: */ static atomic_t start_count; static atomic_t stop_count; static atomic_t test_runs; /* * We use a raw spinlock in this exceptional case, because * we want to have the fastest, inlined, non-debug version * of a critical section, to be able to prove TSC time-warps: */ static arch_spinlock_t sync_lock = __ARCH_SPIN_LOCK_UNLOCKED; static cycles_t last_tsc; static cycles_t max_warp; static int nr_warps; static int random_warps; /* * TSC-warp measurement loop running on both CPUs. This is not called * if there is no TSC. */ static cycles_t check_tsc_warp(unsigned int timeout) { cycles_t start, now, prev, end, cur_max_warp = 0; int i, cur_warps = 0; start = rdtsc_ordered(); /* * The measurement runs for 'timeout' msecs: */ end = start + (cycles_t) tsc_khz * timeout; for (i = 0; ; i++) { /* * We take the global lock, measure TSC, save the * previous TSC that was measured (possibly on * another CPU) and update the previous TSC timestamp. */ arch_spin_lock(&sync_lock); prev = last_tsc; now = rdtsc_ordered(); last_tsc = now; arch_spin_unlock(&sync_lock); /* * Be nice every now and then (and also check whether * measurement is done [we also insert a 10 million * loops safety exit, so we dont lock up in case the * TSC readout is totally broken]): */ if (unlikely(!(i & 7))) { if (now > end || i > 10000000) break; cpu_relax(); touch_nmi_watchdog(); } /* * Outside the critical section we can now see whether * we saw a time-warp of the TSC going backwards: */ if (unlikely(prev > now)) { arch_spin_lock(&sync_lock); max_warp = max(max_warp, prev - now); cur_max_warp = max_warp; /* * Check whether this bounces back and forth. Only * one CPU should observe time going backwards. */ if (cur_warps != nr_warps) random_warps++; nr_warps++; cur_warps = nr_warps; arch_spin_unlock(&sync_lock); } } WARN(!(now-start), "Warning: zero tsc calibration delta: %Ld [max: %Ld]\n", now-start, end-start); return cur_max_warp; } /* * If the target CPU coming online doesn't have any of its core-siblings * online, a timeout of 20msec will be used for the TSC-warp measurement * loop. Otherwise a smaller timeout of 2msec will be used, as we have some * information about this socket already (and this information grows as we * have more and more logical-siblings in that socket). * * Ideally we should be able to skip the TSC sync check on the other * core-siblings, if the first logical CPU in a socket passed the sync test. * But as the TSC is per-logical CPU and can potentially be modified wrongly * by the bios, TSC sync test for smaller duration should be able * to catch such errors. Also this will catch the condition where all the * cores in the socket don't get reset at the same time. */ static inline unsigned int loop_timeout(int cpu) { return (cpumask_weight(topology_core_cpumask(cpu)) > 1) ? 2 : 20; } static void tsc_sync_mark_tsc_unstable(struct work_struct *work) { mark_tsc_unstable("check_tsc_sync_source failed"); } static DECLARE_WORK(tsc_sync_work, tsc_sync_mark_tsc_unstable); /* * The freshly booted CPU initiates this via an async SMP function call. */ static void check_tsc_sync_source(void *__cpu) { unsigned int cpu = (unsigned long)__cpu; int cpus = 2; /* * Set the maximum number of test runs to * 1 if the CPU does not provide the TSC_ADJUST MSR * 3 if the MSR is available, so the target can try to adjust */ if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST)) atomic_set(&test_runs, 1); else atomic_set(&test_runs, 3); retry: /* Wait for the target to start. */ while (atomic_read(&start_count) != cpus - 1) cpu_relax(); /* * Trigger the target to continue into the measurement too: */ atomic_inc(&start_count); check_tsc_warp(loop_timeout(cpu)); while (atomic_read(&stop_count) != cpus-1) cpu_relax(); /* * If the test was successful set the number of runs to zero and * stop. If not, decrement the number of runs an check if we can * retry. In case of random warps no retry is attempted. */ if (!nr_warps) { atomic_set(&test_runs, 0); pr_debug("TSC synchronization [CPU#%d -> CPU#%u]: passed\n", smp_processor_id(), cpu); } else if (atomic_dec_and_test(&test_runs) || random_warps) { /* Force it to 0 if random warps brought us here */ atomic_set(&test_runs, 0); pr_warn("TSC synchronization [CPU#%d -> CPU#%u]:\n", smp_processor_id(), cpu); pr_warn("Measured %Ld cycles TSC warp between CPUs, " "turning off TSC clock.\n", max_warp); if (random_warps) pr_warn("TSC warped randomly between CPUs\n"); schedule_work(&tsc_sync_work); } /* * Reset it - just in case we boot another CPU later: */ atomic_set(&start_count, 0); random_warps = 0; nr_warps = 0; max_warp = 0; last_tsc = 0; /* * Let the target continue with the bootup: */ atomic_inc(&stop_count); /* * Retry, if there is a chance to do so. */ if (atomic_read(&test_runs) > 0) goto retry; } /* * Freshly booted CPUs call into this: */ void check_tsc_sync_target(void) { struct tsc_adjust *cur = this_cpu_ptr(&tsc_adjust); unsigned int cpu = smp_processor_id(); cycles_t cur_max_warp, gbl_max_warp; int cpus = 2; /* Also aborts if there is no TSC. */ if (unsynchronized_tsc()) return; /* * Store, verify and sanitize the TSC adjust register. If * successful skip the test. * * The test is also skipped when the TSC is marked reliable. This * is true for SoCs which have no fallback clocksource. On these * SoCs the TSC is frequency synchronized, but still the TSC ADJUST * register might have been wreckaged by the BIOS.. */ if (tsc_store_and_check_tsc_adjust(false) || tsc_clocksource_reliable) return; /* Kick the control CPU into the TSC synchronization function */ smp_call_function_single(cpumask_first(cpu_online_mask), check_tsc_sync_source, (unsigned long *)(unsigned long)cpu, 0); retry: /* * Register this CPU's participation and wait for the * source CPU to start the measurement: */ atomic_inc(&start_count); while (atomic_read(&start_count) != cpus) cpu_relax(); cur_max_warp = check_tsc_warp(loop_timeout(cpu)); /* * Store the maximum observed warp value for a potential retry: */ gbl_max_warp = max_warp; /* * Ok, we are done: */ atomic_inc(&stop_count); /* * Wait for the source CPU to print stuff: */ while (atomic_read(&stop_count) != cpus) cpu_relax(); /* * Reset it for the next sync test: */ atomic_set(&stop_count, 0); /* * Check the number of remaining test runs. If not zero, the test * failed and a retry with adjusted TSC is possible. If zero the * test was either successful or failed terminally. */ if (!atomic_read(&test_runs)) return; /* * If the warp value of this CPU is 0, then the other CPU * observed time going backwards so this TSC was ahead and