// SPDX-License-Identifier: GPL-2.0#define pr_fmt(fmt) "ACPI: " fmt#include <linux/pci.h>#include <linux/acpi.h>#include <acpi/reboot.h>#include <linux/delay.h>#ifdef CONFIG_PCIstatic void acpi_pci_reboot(struct acpi_generic_address *rr, u8 reset_value){ unsigned int devfn; struct pci_bus *bus0; /* The reset register can only live on bus 0. */ bus0 = pci_find_bus(0, 0); if (!bus0) return; /* Form PCI device/function pair. */ devfn = PCI_DEVFN((rr->address >> 32) & 0xffff, (rr->address >> 16) & 0xffff); pr_debug("Resetting with ACPI PCI RESET_REG.\n"); /* Write the value that resets us. */ pci_bus_write_config_byte(bus0, devfn, (rr->address & 0xffff), reset_value);}#elsestatic inline void acpi_pci_reboot(struct acpi_generic_address *rr, u8 reset_value){ pr_warn_once("PCI configuration space access is not supported\n");}#endifvoid acpi_reboot(void){ struct acpi_generic_address *rr; u8 reset_value; if (acpi_disabled) return; rr = &acpi_gbl_FADT.reset_register; /* ACPI reset register was only introduced with v2 of the FADT */ if (acpi_gbl_FADT.header.revision < 2) return; /* Is the reset register supported? The spec says we should be * checking the bit width and bit offset, but Windows ignores * these fields */ if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER)) return; reset_value = acpi_gbl_FADT.reset_value; /* The reset register can only exist in I/O, Memory or PCI config space * on a device on bus 0. */ switch (rr->space_id) { case ACPI_ADR_SPACE_PCI_CONFIG: acpi_pci_reboot(rr, reset_value); break; case ACPI_ADR_SPACE_SYSTEM_MEMORY: case ACPI_ADR_SPACE_SYSTEM_IO: pr_debug("ACPI MEMORY or I/O RESET_REG.\n"); acpi_reset(); break; } /* * Some platforms do not shut down immediately after writing to the * ACPI reset register, and this results in racing with the * subsequent reboot mechanism. * * The 15ms delay has been found to be long enough for the system * to reboot on the affected platforms. */ mdelay(15);}
// SPDX-License-Identifier: GPL-2.0
#define pr_fmt(fmt) "ACPI: " fmt
#include <linux/pci.h>
#include <linux/acpi.h>
#include <acpi/reboot.h>
#include <linux/delay.h>
#ifdef CONFIG_PCI
static void acpi_pci_reboot(struct acpi_generic_address *rr, u8 reset_value)
{
unsigned int devfn;
struct pci_bus *bus0;
/* The reset register can only live on bus 0. */
bus0 = pci_find_bus(0, 0);
if (!bus0)
return;
/* Form PCI device/function pair. */
devfn = PCI_DEVFN((rr->address >> 32) & 0xffff,
(rr->address >> 16) & 0xffff);
pr_debug("Resetting with ACPI PCI RESET_REG.\n");
/* Write the value that resets us. */
pci_bus_write_config_byte(bus0, devfn,
(rr->address & 0xffff), reset_value);
}
#else
static inline void acpi_pci_reboot(struct acpi_generic_address *rr,
u8 reset_value)
{
pr_warn_once("PCI configuration space access is not supported\n");
}
#endif
void acpi_reboot(void)
{
struct acpi_generic_address *rr;
u8 reset_value;
if (acpi_disabled)
return;
rr = &acpi_gbl_FADT.reset_register;
/* ACPI reset register was only introduced with v2 of the FADT */
if (acpi_gbl_FADT.header.revision < 2)
return;
/* Is the reset register supported? The spec says we should be
* checking the bit width and bit offset, but Windows ignores
* these fields */
if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER))
return;
reset_value = acpi_gbl_FADT.reset_value;
/* The reset register can only exist in I/O, Memory or PCI config space
* on a device on bus 0. */
switch (rr->space_id) {
case ACPI_ADR_SPACE_PCI_CONFIG:
acpi_pci_reboot(rr, reset_value);
break;
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
case ACPI_ADR_SPACE_SYSTEM_IO:
pr_debug("ACPI MEMORY or I/O RESET_REG.\n");
acpi_reset();
break;
}
/*
* Some platforms do not shut down immediately after writing to the
* ACPI reset register, and this results in racing with the
* subsequent reboot mechanism.
*
* The 15ms delay has been found to be long enough for the system
* to reboot on the affected platforms.
*/
mdelay(15);
}