# SPDX-License-Identifier: GPL-2.0## SATA/PATA driver configuration# config HAVE_PATA_PLATFORM bool help This is an internal configuration node for any machine that uses pata-platform driver to enable the relevant driver in the configuration structure without having to submit endless patches to update the PATA_PLATFORM entry. menuconfig ATA tristate "Serial ATA and Parallel ATA drivers (libata)" depends on HAS_IOMEM depends on BLOCK select SCSI select GLOB help If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or any other ATA device under Linux, say Y and make sure that you know the name of your ATA host adapter (the card inside your computer that "speaks" the ATA protocol, also called ATA controller), because you will be asked for it. NOTE: ATA enables basic SCSI support; *however*, 'SCSI disk support', 'SCSI tape support', or 'SCSI CDROM support' may also be needed, depending on your hardware configuration. if ATA config ATA_NONSTANDARD bool config SATA_HOST bool config PATA_TIMINGS bool config ATA_VERBOSE_ERROR bool "Verbose ATA error reporting" default y help This option adds parsing of ATA command descriptions and error bits in libata kernel output, making it easier to interpret. This option will enlarge the kernel by approx. 6KB. Disable it only if kernel size is more important than ease of debugging. If unsure, say Y. config ATA_FORCE bool "\"libata.force=\" kernel parameter support" if EXPERT default y help This option adds support for "libata.force=" kernel parameter for forcing configuration settings. For further information, please read <file:Documentation/admin-guide/kernel-parameters.txt>. This option will enlarge the kernel by approx. 3KB. Disable it if kernel size is more important than ability to override the default configuration settings. If unsure, say Y. config ATA_ACPI bool "ATA ACPI Support" depends on ACPI select PATA_TIMINGS default y help This option adds support for ATA-related ACPI objects. These ACPI objects add the ability to retrieve taskfiles from the ACPI BIOS and write them to the disk controller. These objects may be related to performance, security, power management, or other areas. You can disable this at kernel boot time by using the option libata.noacpi=1 config SATA_ZPODD bool "SATA Zero Power Optical Disc Drive (ZPODD) support" depends on ATA_ACPI && PM help This option adds support for SATA Zero Power Optical Disc Drive (ZPODD). It requires both the ODD and the platform support, and if enabled, will automatically power on/off the ODD when certain condition is satisfied. This does not impact end user's experience of the ODD, only power is saved when the ODD is not in use (i.e. no disc inside). If unsure, say N. config SATA_PMP bool "SATA Port Multiplier support" depends on SATA_HOST default y help This option adds support for SATA Port Multipliers (the SATA version of an ethernet hub, or SAS expander). if HAS_DMA comment "Controllers with non-SFF native interface" config SATA_AHCI tristate "AHCI SATA support" depends on PCI select SATA_HOST help This option enables support for AHCI Serial ATA. If unsure, say N. config SATA_MOBILE_LPM_POLICY int "Default SATA Link Power Management policy" range 0 5 default 3 depends on SATA_AHCI help Select the Default SATA Link Power Management (LPM) policy to use for chipsets / "South Bridges" supporting low-power modes. Such chipsets are ubiquitous across laptops, desktops and servers. Each policy combines power saving states and features: - Partial: The Phy logic is powered but is in a reduced power state. The exit latency from this state is no longer than 10us). - Slumber: The Phy logic is powered but is in an even lower power state. The exit latency from this state is potentially longer, but no longer than 10ms. - DevSleep: The Phy logic may be powered down. The exit latency from this state is no longer than 20 ms, unless otherwise specified by DETO in the device Identify Device Data log. - HIPM: Host Initiated Power Management (host automatically transitions to partial and slumber). - DIPM: Device Initiated Power Management (device automatically transitions to partial and slumber). The possible values for the default SATA link power management policies are: 0 => Keep firmware settings 1 => No power savings (maximum performance) 2 => HIPM (Partial) 3 => HIPM (Partial) and DIPM (Partial and Slumber) 4 => HIPM (Partial and DevSleep) and DIPM (Partial and Slumber) 5 => HIPM (Slumber and DevSleep) and DIPM (Partial and Slumber) Excluding the value 0, higher values represent policies with higher power savings. config SATA_AHCI_PLATFORM tristate "Platform AHCI SATA support" select SATA_HOST help This option enables support for Platform AHCI Serial ATA controllers. If unsure, say N. config AHCI_BRCM tristate "Broadcom AHCI SATA support" depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \ ARCH_BCMBCA || COMPILE_TEST select SATA_HOST help This option enables support for the AHCI SATA3 controller found on Broadcom SoC's. If unsure, say N. config AHCI_DA850 tristate "DaVinci DA850 AHCI SATA support" depends on ARCH_DAVINCI_DA850 || COMPILE_TEST select SATA_HOST help This option enables support for the DaVinci DA850 SoC's onboard AHCI SATA. If unsure, say N. config AHCI_DM816 tristate "DaVinci DM816 AHCI SATA support" depends on ARCH_OMAP2PLUS || COMPILE_TEST select SATA_HOST help This option enables support for the DaVinci DM816 SoC's onboard AHCI SATA controller. If unsure, say N. config AHCI_DWC tristate "Synopsys DWC AHCI SATA support" select SATA_HOST help This option enables support for the Synopsys DWC AHCI SATA controller implementation. If unsure, say N. config AHCI_ST tristate "ST AHCI SATA support" depends on ARCH_STI || COMPILE_TEST select SATA_HOST help This option enables support for ST AHCI SATA controller. If unsure, say N. config AHCI_IMX tristate "Freescale i.MX AHCI SATA support" depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST) depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON select SATA_HOST help This option enables support for the Freescale i.MX SoC's onboard AHCI SATA. If unsure, say N. config AHCI_CEVA tristate "CEVA AHCI SATA support" depends on OF select SATA_HOST help This option enables support for the CEVA AHCI SATA. It can be found on the Xilinx Zynq UltraScale+ MPSoC. If unsure, say N. config AHCI_MTK tristate "MediaTek AHCI SATA support" depends on ARCH_MEDIATEK || COMPILE_TEST select MFD_SYSCON select SATA_HOST help This option enables support for the MediaTek SoC's onboard AHCI SATA controller. If unsure, say N. config AHCI_MVEBU tristate "Marvell EBU AHCI SATA support" depends on ARCH_MVEBU || COMPILE_TEST select SATA_HOST help This option enables support for the Marvebu EBU SoC's onboard AHCI SATA. If unsure, say N. config AHCI_OCTEON tristate "Cavium Octeon Soc Serial ATA" depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC default y help This option enables support for Cavium Octeon SoC Serial ATA. If unsure, say N. config AHCI_SUNXI tristate "Allwinner sunxi AHCI SATA support" depends on ARCH_SUNXI || COMPILE_TEST select SATA_HOST help This option enables support for the Allwinner sunxi SoC's onboard AHCI SATA. If unsure, say N. config AHCI_TEGRA tristate "NVIDIA Tegra AHCI SATA support" depends on ARCH_TEGRA || COMPILE_TEST select SATA_HOST help This option enables support for the NVIDIA Tegra SoC's onboard AHCI SATA. If unsure, say N. config AHCI_XGENE tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" depends on PHY_XGENE || COMPILE_TEST select SATA_HOST help This option enables support for APM X-Gene SoC SATA host controller. config AHCI_QORIQ tristate "Freescale QorIQ AHCI SATA support" depends on OF depends on SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST select SATA_HOST help This option enables support for the Freescale QorIQ AHCI SoC's onboard AHCI SATA. If unsure, say N. config SATA_FSL tristate "Freescale 3.0Gbps SATA support" depends on FSL_SOC || COMPILE_TEST select SATA_HOST help This option enables support for Freescale 3.0Gbps SATA controller. It can be found on MPC837x and MPC8315. If unsure, say N. config SATA_GEMINI tristate "Gemini SATA bridge support" depends on ARCH_GEMINI || COMPILE_TEST select SATA_HOST default ARCH_GEMINI help This enabled support for the FTIDE010 to SATA bridge found in Cortina Systems Gemini platform. If unsure, say N. config SATA_AHCI_SEATTLE tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support" depends on ARCH_SEATTLE || COMPILE_TEST select SATA_HOST help This option enables support for AMD Seattle SATA host controller. If unsure, say N config SATA_INIC162X tristate "Initio 162x SATA support (Very Experimental)" depends on PCI select SATA_HOST help This option enables support for Initio 162x Serial ATA. config SATA_ACARD_AHCI tristate "ACard AHCI variant (ATP 8620)" depends on PCI select SATA_HOST help This option enables support for Acard. If unsure, say N. config SATA_SIL24 tristate "Silicon Image 3124/3132 SATA support" depends on PCI select SATA_HOST help This option enables support for Silicon Image 3124/3132 Serial ATA. If unsure, say N. endif # HAS_DMA config ATA_SFF bool "ATA SFF support (for legacy IDE and PATA)" default y help This option adds support for ATA controllers with SFF compliant or similar programming interface. SFF is the legacy IDE interface that has been around since the dawn of time. Almost all PATA controllers have an SFF interface. Many SATA controllers have an SFF interface when configured into a legacy compatibility mode. For users with exclusively modern controllers like AHCI, Silicon Image 3124, or Marvell 6440, you may choose to disable this unneeded SFF support. If unsure, say Y. if ATA_SFF comment "SFF controllers with custom DMA interface" config PDC_ADMA tristate "Pacific Digital ADMA support" depends on PCI help This option enables support for Pacific Digital ADMA controllers If unsure, say N. config PATA_OCTEON_CF tristate "OCTEON Boot Bus Compact Flash support" depends on CAVIUM_OCTEON_SOC select PATA_TIMINGS help This option enables a polled compact flash driver for use with compact flash cards attached to the OCTEON boot bus. If unsure, say N. config SATA_QSTOR tristate "Pacific Digital SATA QStor support" depends on PCI select SATA_HOST help This option enables support for Pacific Digital Serial ATA QStor. If unsure, say N. config SATA_SX4 tristate "Promise SATA SX4 support (Experimental)" depends on PCI select SATA_HOST help This option enables support for Promise Serial ATA SX4. If unsure, say N. config ATA_BMDMA bool "ATA BMDMA support" depends on HAS_DMA default y help This option adds support for SFF ATA controllers with BMDMA capability. BMDMA stands for bus-master DMA and is the de facto DMA interface for SFF controllers. If unsure, say Y. if ATA_BMDMA comment "SATA SFF controllers with BMDMA" config ATA_PIIX tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" depends on PCI select SATA_HOST help This option enables support for ICH5/6/7/8 Serial ATA and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series host controllers. If unsure, say N. config SATA_DWC tristate "DesignWare Cores SATA support" depends on DMADEVICES select GENERIC_PHY select SATA_HOST help This option enables support for the on-chip SATA controller of the AppliedMicro processor 460EX. If unsure, say N. config SATA_DWC_OLD_DMA bool "Support old device trees" depends on SATA_DWC select DW_DMAC_CORE default y if 460EX help This option enables support for old device trees without the "dmas" property. config SATA_HIGHBANK tristate "Calxeda Highbank SATA support" depends on ARCH_HIGHBANK || COMPILE_TEST select SATA_HOST help This option enables support for the Calxeda Highbank SoC's onboard SATA. If unsure, say N. config SATA_MV tristate "Marvell SATA support" depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST select GENERIC_PHY select SATA_HOST help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, as well as the newer [67]042 PCI-X/PCIe and SOC devices. If unsure, say N. config SATA_NV tristate "NVIDIA SATA support" depends on PCI select SATA_HOST help This option enables support for NVIDIA Serial ATA. If unsure, say N. config SATA_PROMISE tristate "Promise SATA TX2/TX4 support" depends on PCI select SATA_HOST help This option enables support for Promise Serial ATA TX2/TX4. Lines 1–500 of 1194. Load more
# SPDX-License-Identifier: GPL-2.0 # # SATA/PATA driver configuration # config HAVE_PATA_PLATFORM bool help This is an internal configuration node for any machine that uses pata-platform driver to enable the relevant driver in the configuration structure without having to submit endless patches to update the PATA_PLATFORM entry. menuconfig ATA tristate "Serial ATA and Parallel ATA drivers (libata)" depends on HAS_IOMEM depends on BLOCK select SCSI select GLOB help If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or any other ATA device under Linux, say Y and make sure that you know the name of your ATA host adapter (the card inside your computer that "speaks" the ATA protocol, also called ATA controller), because you will be asked for it. NOTE: ATA enables basic SCSI support; *however*, 'SCSI disk support', 'SCSI tape support', or 'SCSI CDROM support' may also be needed, depending on your hardware configuration. if ATA config ATA_NONSTANDARD bool config SATA_HOST bool config PATA_TIMINGS bool config ATA_VERBOSE_ERROR bool "Verbose ATA error reporting" default y help This option adds parsing of ATA command descriptions and error bits in libata kernel output, making it easier to interpret. This option will enlarge the kernel by approx. 6KB. Disable it only if kernel size is more important than ease of debugging. If unsure, say Y. config ATA_FORCE bool "\"libata.force=\" kernel parameter support" if EXPERT default y help This option adds support for "libata.force=" kernel parameter for forcing configuration settings. For further information, please read <file:Documentation/admin-guide/kernel-parameters.txt>. This option will enlarge the kernel by approx. 3KB. Disable it if kernel size is more important than ability to override the default configuration settings. If unsure, say Y. config ATA_ACPI bool "ATA ACPI Support" depends on ACPI select PATA_TIMINGS default y help This option adds support for ATA-related ACPI objects. These ACPI objects add the ability to retrieve taskfiles from the ACPI BIOS and write them to the disk controller. These objects may be related to performance, security, power management, or other areas. You can disable this at kernel boot time by using the option libata.noacpi=1 config SATA_ZPODD bool "SATA Zero Power Optical Disc Drive (ZPODD) support" depends on ATA_ACPI && PM help This option adds support for SATA Zero Power Optical Disc Drive (ZPODD). It requires both the ODD and the platform support, and if enabled, will automatically power on/off the ODD when certain condition is satisfied. This does not impact end user's experience of the ODD, only power is saved when the ODD is not in use (i.e. no disc inside). If unsure, say N. config SATA_PMP bool "SATA Port Multiplier support" depends on SATA_HOST default y help This option adds support for SATA Port Multipliers (the SATA version of an ethernet hub, or SAS expander). if HAS_DMA comment "Controllers with non-SFF native interface" config SATA_AHCI tristate "AHCI SATA support" depends on PCI select SATA_HOST help This option enables support for AHCI Serial ATA. If unsure, say N. config SATA_MOBILE_LPM_POLICY int "Default SATA Link Power Management policy" range 0 5 default 3 depends on SATA_AHCI help Select the Default SATA Link Power Management (LPM) policy to use for chipsets / "South Bridges" supporting low-power modes. Such chipsets are ubiquitous across laptops, desktops and servers. Each policy combines power saving states and features: - Partial: The Phy logic is powered but is in a reduced power state. The exit latency from this state is no longer than 10us). - Slumber: The Phy logic is powered but is in an even lower power state. The exit latency from this state is potentially longer, but no longer than 10ms. - DevSleep: The Phy logic may be powered down. The exit latency from this state is no longer than 20 ms, unless otherwise specified by DETO in the device Identify Device Data log. - HIPM: Host Initiated Power Management (host automatically transitions to partial and slumber). - DIPM: Device Initiated Power Management (device automatically transitions to partial and slumber). The possible values for the default SATA link power management policies are: 0 => Keep firmware settings 1 => No power savings (maximum performance) 2 => HIPM (Partial) 3 => HIPM (Partial) and DIPM (Partial and Slumber) 4 => HIPM (Partial and DevSleep) and DIPM (Partial and Slumber) 5 => HIPM (Slumber and DevSleep) and DIPM (Partial and Slumber) Excluding the value 0, higher values represent policies with higher power savings. config SATA_AHCI_PLATFORM tristate "Platform AHCI SATA support" select SATA_HOST help This option enables support for Platform AHCI Serial ATA controllers. If unsure, say N. config AHCI_BRCM tristate "Broadcom AHCI SATA support" depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \ ARCH_BCMBCA || COMPILE_TEST select SATA_HOST help This option enables support for the AHCI SATA3 controller found on Broadcom SoC's. If unsure, say N. config AHCI_DA850 tristate "DaVinci DA850 AHCI SATA support" depends on ARCH_DAVINCI_DA850 || COMPILE_TEST select SATA_HOST help This option enables support for the DaVinci DA850 SoC's onboard AHCI SATA. If unsure, say N. config AHCI_DM816 tristate "DaVinci DM816 AHCI SATA support" depends on ARCH_OMAP2PLUS || COMPILE_TEST select SATA_HOST help This option enables support for the DaVinci DM816 SoC's onboard AHCI SATA controller. If unsure, say N. config AHCI_DWC tristate "Synopsys DWC AHCI SATA support" select SATA_HOST help This option enables support for the Synopsys DWC AHCI SATA controller implementation. If unsure, say N. config AHCI_ST tristate "ST AHCI SATA support" depends on ARCH_STI || COMPILE_TEST select SATA_HOST help This option enables support for ST AHCI SATA controller. If unsure, say N. config AHCI_IMX tristate "Freescale i.MX AHCI SATA support" depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST) depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON select SATA_HOST help This option enables support for the Freescale i.MX SoC's onboard AHCI SATA. If unsure, say N. config AHCI_CEVA tristate "CEVA AHCI SATA support" depends on OF select SATA_HOST help This option enables support for the CEVA AHCI SATA. It can be found on the Xilinx Zynq UltraScale+ MPSoC. If unsure, say N. config AHCI_MTK tristate "MediaTek AHCI SATA support" depends on ARCH_MEDIATEK || COMPILE_TEST select MFD_SYSCON select SATA_HOST help This option enables support for the MediaTek SoC's onboard AHCI SATA controller. If unsure, say N. config AHCI_MVEBU tristate "Marvell EBU AHCI SATA support" depends on ARCH_MVEBU || COMPILE_TEST select SATA_HOST help This option enables support for the Marvebu EBU SoC's onboard AHCI SATA. If unsure, say N. config AHCI_OCTEON tristate "Cavium Octeon Soc Serial ATA" depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC default y help This option enables support for Cavium Octeon SoC Serial ATA. If unsure, say N. config AHCI_SUNXI tristate "Allwinner sunxi AHCI SATA support" depends on ARCH_SUNXI || COMPILE_TEST select SATA_HOST help This option enables support for the Allwinner sunxi SoC's onboard AHCI SATA. If unsure, say N. config AHCI_TEGRA tristate "NVIDIA Tegra AHCI SATA support" depends on ARCH_TEGRA || COMPILE_TEST select SATA_HOST help This option enables support for the NVIDIA Tegra SoC's onboard AHCI SATA. If unsure, say N. config AHCI_XGENE tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" depends on PHY_XGENE || COMPILE_TEST select SATA_HOST help This option enables support for APM X-Gene SoC SATA host controller. config AHCI_QORIQ tristate "Freescale QorIQ AHCI SATA support" depends on OF depends on SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST select SATA_HOST help This option enables support for the Freescale QorIQ AHCI SoC's onboard AHCI SATA. If unsure, say N. config SATA_FSL tristate "Freescale 3.0Gbps SATA support" depends on FSL_SOC || COMPILE_TEST select SATA_HOST help This option enables support for Freescale 3.0Gbps SATA controller. It can be found on MPC837x and MPC8315. If unsure, say N. config SATA_GEMINI tristate "Gemini SATA bridge support" depends on ARCH_GEMINI || COMPILE_TEST select SATA_HOST default ARCH_GEMINI help This enabled support for the FTIDE010 to SATA bridge found in Cortina Systems Gemini platform. If unsure, say N. config SATA_AHCI_SEATTLE tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support" depends on ARCH_SEATTLE || COMPILE_TEST select SATA_HOST help This option enables support for AMD Seattle SATA host controller. If unsure, say N config SATA_INIC162X tristate "Initio 162x SATA support (Very Experimental)" depends on PCI select SATA_HOST help This option enables support for Initio 162x Serial ATA. config SATA_ACARD_AHCI tristate "ACard AHCI variant (ATP 8620)" depends on PCI select SATA_HOST help This option enables support for Acard. If unsure, say N. config SATA_SIL24 tristate "Silicon Image 3124/3132 SATA support" depends on PCI select SATA_HOST help This option enables support for Silicon Image 3124/3132 Serial ATA. If unsure, say N. endif # HAS_DMA config ATA_SFF bool "ATA SFF support (for legacy IDE and PATA)" default y help This option adds support for ATA controllers with SFF compliant or similar programming interface. SFF is the legacy IDE interface that has been around since the dawn of time. Almost all PATA controllers have an SFF interface. Many SATA controllers have an SFF interface when configured into a legacy compatibility mode. For users with exclusively modern controllers like AHCI, Silicon Image 3124, or Marvell 6440, you may choose to disable this unneeded SFF support. If unsure, say Y. if ATA_SFF comment "SFF controllers with custom DMA interface" config PDC_ADMA tristate "Pacific Digital ADMA support" depends on PCI help This option enables support for Pacific Digital ADMA controllers If unsure, say N. config PATA_OCTEON_CF tristate "OCTEON Boot Bus Compact Flash support" depends on CAVIUM_OCTEON_SOC select PATA_TIMINGS help This option enables a polled compact flash driver for use with compact flash cards attached to the OCTEON boot bus. If unsure, say N. config SATA_QSTOR tristate "Pacific Digital SATA QStor support" depends on PCI select SATA_HOST help This option enables support for Pacific Digital Serial ATA QStor. If unsure, say N. config SATA_SX4 tristate "Promise SATA SX4 support (Experimental)" depends on PCI select SATA_HOST help This option enables support for Promise Serial ATA SX4. If unsure, say N. config ATA_BMDMA bool "ATA BMDMA support" depends on HAS_DMA default y help This option adds support for SFF ATA controllers with BMDMA capability. BMDMA stands for bus-master DMA and is the de facto DMA interface for SFF controllers. If unsure, say Y. if ATA_BMDMA comment "SATA SFF controllers with BMDMA" config ATA_PIIX tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" depends on PCI select SATA_HOST help This option enables support for ICH5/6/7/8 Serial ATA and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series host controllers. If unsure, say N. config SATA_DWC tristate "DesignWare Cores SATA support" depends on DMADEVICES select GENERIC_PHY select SATA_HOST help This option enables support for the on-chip SATA controller of the AppliedMicro processor 460EX. If unsure, say N. config SATA_DWC_OLD_DMA bool "Support old device trees" depends on SATA_DWC select DW_DMAC_CORE default y if 460EX help This option enables support for old device trees without the "dmas" property. config SATA_HIGHBANK tristate "Calxeda Highbank SATA support" depends on ARCH_HIGHBANK || COMPILE_TEST select SATA_HOST help This option enables support for the Calxeda Highbank SoC's onboard SATA. If unsure, say N. config SATA_MV tristate "Marvell SATA support" depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST select GENERIC_PHY select SATA_HOST help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, as well as the newer [67]042 PCI-X/PCIe and SOC devices. If unsure, say N. config SATA_NV tristate "NVIDIA SATA support" depends on PCI select SATA_HOST help This option enables support for NVIDIA Serial ATA. If unsure, say N. config SATA_PROMISE tristate "Promise SATA TX2/TX4 support" depends on PCI select SATA_HOST help This option enables support for Promise Serial ATA TX2/TX4.